標準號 |
中文名稱 |
英文名稱 |
| EN 12255-10-2000 |
廢水處理廠第10部分：安全規則 |
Wastewater treatment plants - Part 10: Safety principles |
| EN 12255-11-2001 |
廢水處理廠第11部分：一般要求的數據 |
Wastewater treatment plants - Part 11: General data required |
| EN 12255-12-2003 |
廢水處理廠第12部分：控制和自動化 |
Wastewater treatment plants - Part 12: Control and automation |
| EN 12255-13-2002 |
廢水處理廠第13部分：化學處理 通過沉淀/絮凝作用除理廢水 |
Wastewater treatment plants - Part 13: Chemical treatment; Treatment of wastewater by precipitation/flocculation |
| EN 12255-4-2002 |
廢水處理廠第4部分：初級沉降 |
Wastewater treatment plants - Part 4: Primary settlement |
| EN 12255-5-1999 |
廢水處理廠第5部分：沉淀池處理 |
Wastewater treatment plants - Part 5: Lagooning processes |
| EN 12255-6-2002 |
廢水處理廠第6部分：活性污泥處理 |
Wastewater treatment plants - Part 6: Activated sludge process |
| EN 12255-7-2002 |
廢水處理廠第7部分：生物固定膜反應器 |
Wastewater treatment plants - Part 7: Biological fixed-film reactors |
| EN 12255-8-2001 |
廢水處理廠第8部分： 污泥處理和存貯 |
Wastewater treatment plants - Part 8: Sludge treatment and storage |
| EN 12255-9-2002 |
廢水處理廠第9部分：氣味控制和通風 |
Wastewater treatment plants - Part 9: Odour control and ventilation |
| EN 12256-1998 |
塑料管道系統.熱塑性塑料配件裝配式配件機械強度或撓度的試驗方法 |
Plastics piping systems - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings |
| EN 12257-2002 |
可移動氣瓶無縫、環裹復合氣瓶 |
Transportable gas cylinders - Seamless, hoop-wrapped composite cylinders |
| EN 12258-1-1998 |
鋁和鋁合金術語和定義第1部分：通用術語 |
Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms |
| EN 12258-3-2003 |
鋁和鋁合金術語和定義第3部分：廢料 |
Aluminium and aluminium alloys - Terms and definitions - Part 3: Scrap |
| EN 12259-2-1999 |
固定消防系統噴水器和噴水系統構件第2部分：濕式報警閥組件 |
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 2: Wet alarm valve assemblies |
| EN 12259-5-2002 |
固定消防系統噴水器和噴水系統構件第5部分：水流檢測器 |
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 5: Water flow detectors |
| EN 1226-1996 |
塑料管道系統 玻璃增強熱固性塑料管 驗證初期環狀物撓曲阻力的試驗方法 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Test method to prove the resistance to initial ring deflection |
| EN 12260-2003 |
標準號： |
中文標題： |
| EN 12262-1998 |
旋動式泵技術文件術語、輸出范圍、設計 |
Rotodynamic pumps - Technical documents - Terms, delivery range, layout |
| EN 12263-1998 |
制冷系統和加熱泵限壓安全開關裝置要求和試驗 |
Refrigerating systems and heat pumps - Safety switching devices for limiting the pressure - Requirements and tests |
| EN 12266-1-2003 |
工業閥門閥門試驗第1部分：壓力試驗、試驗程序和驗收標準、強制要求 |
Industrial valves - Testing of valves - Part 1: Pressure tests, test procedures and acceptance criteria; Mandatory requirements |
| EN 12266-2-2002 |
工業閥門閥門試驗第2部分：試驗、試驗程序和驗收標準 補充要求 |
Industrial valves - Testing of valves - Part 2: Tests, test procedures and acceptance criteria; Supplementary requirements |
| EN 12267-2003 |
食品加工機械圓鋸床安全和衛生要求 |
Food processing machinery - Circular saw machines - Safety and hygiene requirements |
| EN 12268-2003 |
食品加工機械帶鋸床安全和衛生要求 |
Food processing machinery - Band saw machines - Safety and hygiene requirements |
| EN 12269-1-2000 |
用“壓梁試驗”測定鋼筋與熱壓加氣混凝土之間的粘結性能第1部分：短期試驗 |
Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the beam test - Part 1: Short term test |
| EN 1227-1997 |
塑料管道系統 玻璃增強熱固性塑料管 潮濕條件下長期最終相關環狀物撓曲的測定 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the long-term ultimate relative ring deflection under wet conditions |
| EN 12270-1998 |
登山設備楔子安全要求和試驗方法 |
Mountaineering equipment - Chocks - Safety requirements and test methods |
| EN 12271-3-2002 |
地面修整規范第3部分：粘合劑和碎屑擴散速度和擴散準確度 |
Surface dressing - Specifications - Part 3: Rate of spread and accuracy of spread of binders and chippings |
| EN 12272-1-2002 |
地面修整試驗方法第1部分：粘合劑和碎屑擴散速度和擴散準確度 |
Surface dressing - Test methods - Part 1: Rate of spread and accuracy of spread of binders and chippings |
| EN 12272-2-2003 |
表面覆蓋層試驗方法第2部分：缺陷目測 |
Surface dressing - Test methods - Part 2: Visual assessment of defects |
| EN 12272-3-2003 |
地面修整試驗方法第3部分：采用Vialit板沖擊試驗法測定粘合劑集料粘結性 |
Surface dressing - Test method - Part 3: Determination of binder aggregate adhesivity by the Vialit plate shock test method |
| EN 12274-1-2002 |
泥漿表面處理試驗方法第1部分：粘合劑萃取物取樣 |
Slurry surfacing - Test methods - Part 1: Sampling for binder extraction |
| EN 12274-2-2003 |
泥漿表面處理試驗方法第2部分：殘留粘合劑含量的測定 |
Slurry surfacing - Test methods - Part 2: Determination of residual binder content |
| EN 12274-3-2002 |
泥漿表面處理試驗方法第3部分：一致性 |
Slurry surfacing - Test methods - Part 3: Consistency |
| EN 12274-4-2003 |
泥漿表面處理試驗方法第4部分：混合物粘性的測定 |
Slurry surfacing - Test methods - Part 4: Determination of cohesion of the mix |
| EN 12274-5-2003 |
泥漿表面處理試驗方法第5部分：耐磨性的測定 |
Slurry surfacing - Test method - Part 5: Determination of wearing |
| EN 12274-6-2002 |
泥漿表面處理試驗方法第6部分：使用率 |
Slurry surfacing - Test methods - Part 6: Rate of application |
| EN 12275-1998 |
登山設備連接器安全要求和試驗方法 |
Mountaineering equipment - Connectors - Safety requirements and test methods |
| EN 12277-1998 |
登山設備吊帶安全要求和試驗方法 |
Mountaineering equipment - Harnesses - Safety requirements and test methods |
| EN 12278-1998 |
登山設備滑輪安全要求和試驗方法 |
Mountaineering equipment - Pulleys - Safety requirements and test methods |
| EN 12279-2000 |
供氣系統供氣線路上的氣壓調節裝置功能要求 |
Gas supply systems - Gas pressure regulating installations on service lines - Functional requirements |
| EN 1228-1996 |
塑料管道系統 玻璃增強熱固性塑料管 初始特定環剛度的測定 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial specific ring stiffness |
| EN 12280-1-1997 |
橡膠或塑料涂覆織物加速老化試驗第1部分：熱老化 |
Rubber- or plastics-coated fabrics - Accelerated ageing tests - Part 1: Heat ageing |
| EN 12280-2-2002 |
橡膠或塑料涂覆織物加速老化試驗第2部分： 自然老化：光的影響或風化 |
Rubber- or plastics-coated fabrics - Accelerated ageing tests - Part 2: Physical ageing: effect of light or weathering |
| EN 12280-3-2002 |
橡膠或塑料涂覆織物加速老化試驗第3部分：環境老化 |
Rubber- or plastics-coated fabrics - Accelerated ageing tests - Part 3: Environmental ageing |
| EN 12281-2002 |
打印和商務用紙干性上色劑成像法所用復印紙的要求 |
Printing and business paper - Requirements for copy paper for dry toner imaging processes |
| EN 12283-2002 |
打印和商務用紙上色劑附著力的測定 |
Printing and business paper - Determination of toner adhesion |
| EN 12284-2003 |
制冷系統和加熱泵閥門要求、試驗和標志 |
Refrigerating systems and heat pumps - Valves - Requirements, testing and marking |
| EN 12285-1-2003 |
工廠預制鋼罐第1部分：易燃和不易燃的水污染液體地下儲存用臥式圓柱形單層和雙層鋼罐 |
Workshop fabricated steel tanks - Part 1: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids |
| EN 12287-1999 |
體外診斷醫療器械生物起源樣品中數量的測量標準物質描述 |
In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Description of reference materials |
| EN 12288-2003 |
工業用閥 銅合金閘閥 |
Industrial valves - Copper alloy gate valves |
| EN 1229-1996 |
塑料管道系統 玻璃增強熱固性塑料管 驗證短期內部壓力下墻的密封性試驗方法 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the leaktightness of the wall under short-term internal pressure |
| EN 12291-2003 |
高級工藝業陶瓷大氣壓下的空氣環境中陶瓷合成物的高溫機械特性壓縮特性的測定 |
Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmosphere pressure - Determination of compression properties |
| EN 12293-1999 |
塑料管道系統熱水和冷水用熱塑性塑料管道和接頭安裝組件耐熱循環性的試驗方法 |
Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling |
| EN 12294-1999 |
塑料管道系統熱水和冷水系統真空下氣密性的試驗方法 |
Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum |
| EN 12295-1999 |
塑料管道系統熱水和冷水用熱塑性塑料管道和接頭接合處耐壓力循環試驗方法 |
Plastics piping systems - Thermoplastics pipes and associated fittings for hot and cold water - Test method for resistance of joints to pressure cycling |
| EN 12296-1998 |
生物技術設備清潔能力試驗程序指南 |
Biotechnology - Equipment - Guidance on testing procedures for cleanability |
| EN 12297-1998 |
生物技術設備滅菌能力試驗程序指南 |
Biotechnology - Equipment - Guidance on testing procedures for sterilizability |
| EN 12298-1998 |
生物技術設備氣密性試驗程序指南 |
Biotechnology - Equipment - Guidance on testing procedures for leaktightness |
| EN 1230-1-2001 |
與食品接觸的紙和板 感官分析 第1部分：氣味 |
Paper and board intended for contact with foodstuffs - Sensory analysis - Part 1: Odour |
| EN 12300-1998 |
低溫容器低溫設備的清潔度 |
Cryogenic vessels - Cleanliness for cryogenic service |
| EN 12301-2000 |
橡膠和塑料機械砑光機安全要求 |
Rubber and plastics machines - Calenders - Safety requirements |
| EN 12302-2000 |
原焦油和粗苯術語 |
Crude tar and crude benzole - Terminology |
| EN 12303-2000 |
煤焦油機油 術語 |
Coal tar based oils - Terminology |
| EN 12305-1997 |
生物技術用于環境中的變性有機物遺傳變性植物審慎釋放用取樣策略指南 |
Biotechnology - Modified organisms for application in the environment - Guidance for the sampling strategies for deliberate releases of genetically modified plants |
| EN 12306-1997 |
生物技術農業、植物和動物病蟲害控制和環境污染中使用的診斷盒質量控制指南 |
Biotechnology - Guidance for quality control of diagnostic kits used in agriculture, plant and animal pest and disease control and environmental contamination |
| EN 12307-1997 |
生物技術規模加工和生產良好習慣、程序、人員培訓和管理指南 |
Biotechnology - Large-scale process and production - Guidance for good practice, procedures, training and control for personnel |
| EN 12308-1998 |
液化天然裝置和設備液化天然氣管道中所用的法蘭接頭墊圈設計適配性試驗 |
Installations and equipment for LNG - Suitability testing of gaskets designed for flanged joints used on LNG piping |
| EN 12309-1-1999 |
凈熱輸入不超過70kW的燃?xì)馕鼰岷臀鼰崾娇照{(diào)和/或加熱泵裝置第1部分：安全性 |
Gas-fired absorption and adsorption air-conditioning and/or heat pump appliances with a net heat input not exceeding 70 kW - Part 1: Safety |
| EN 12309-2-2000 |
凈熱輸入不超過70kW的燃?xì)馕鼰岷臀鼰崾娇照{(diào)和/或加熱泵裝置第2部分：能量的合理使用 |
Gas-fired absorption and adsorption air-conditioning and/or heat pump appliances with a net heat input not exceeding 70 kW - Part 2: Rational use of energy |
| EN 1231-1996 |
工作場所空氣 短期檢測管測量系統 要求和試驗方法 |
Workplace atmospheres - Short term detector tube measurement systems - Requirements and test methods |
| EN 12310-1-1999 |
撓性防水板第1部分：屋面防水瀝青板抗裂性測定（釘桿） |
Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of resistance to tearing (nail shank) |
| EN 12310-2-2000 |
撓性防水板抗性測定第2部分：塑料和橡膠屋面防水板 |
Flexible sheets for waterproofing - Determination of resistance to tearing - Part 2: Plastic and rubber sheets for roof waterproofing |
| EN 12311-1-1999 |
撓性防水板第1部分：.屋面防水瀝青板拉伸性能的測定 |
Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of tensile properties |
| EN 12311-2-2000 |
撓性防水板拉伸性能的測定第2部分：塑料和橡膠屋面防水板 |
Flexible sheets for waterproofing - Determination of tensile properties - Part 2: Plastic and rubber sheets for roof waterproofing |
| EN 12312-1-2001 |
航空地面輔助設備特殊要求第1部分：旅客用梯 |
Aircraft ground support equipment - Specific requirements - Part 1: Passenger stairs |
| EN 12312-12-2002 |
航空地面輔助設備特殊要求第12部分：便攜式供水設備 |
Aircraft ground support equipment - Specific requirements - Part 12: Potable water service equipment |
| EN 12312-13-2002 |
航空地面輔助設備特殊要求第13部分：盥洗設備 |
Aircraft ground support equipment - Specific requirements - Part 13: Lavatory service equipment |
| EN 12312-17-2004 |
飛行器地面支持設備.特殊要求.第17部分:空調設備 |
|
| EN 12312-2-2002 |
航空地面輔助設備備特殊要求第2部分：給養車 |
Aircraft ground support equipment - Specific requirements - Part 2: Catering vehicles |
| EN 12312-3-2003 |
航空地面輔助設備特殊要求第3部分：傳送帶車 |
Aircraft ground support equipment - Specific requirements - Part 3: Conveyor belt vehicles |
| EN 12312-4-2003 |
航空地面輔助設備特殊要求第4部分：旅客登機橋 |
Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bridges |
| EN 12312-6-2004 |
飛行器地面支持設備.特殊要求.第6部分:去冰機和除冰/防凍設備 |
|
| EN 12316-1-1999 |
撓性防水板第1部分：瀝青屋面防水板結合處抗裂性的測定 |
Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of peel resistance of joints |
| EN 12316-2-2000 |
撓性防水板結合處抗裂性的測定第2部分：塑料和橡膠屋面防水板 |
Flexible sheets for waterproofing - Determination of peel resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing |
| EN 12317-1-1999 |
撓性防水板第1部分：屋面防水瀝青板結合處抗剪切性的測定 |
Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of shear resistance of joints |
| EN 12317-2-2000 |
撓性防水板結合處抗剪切性的測定第2部分：塑料和橡膠屋面防水板 |
Flexible sheets for waterproofing - Determination of shear resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing |
| EN 1232-1997 |
工作場所空氣 化學試劑的個人抽樣用泵 要求和試驗方法 |
Workplace atmospheres - Pumps for personal sampling of chemical agents - Requirements and test methods |
| EN 12320-2001 |
建筑五金件掛鎖和掛鎖配件要求和試驗方法 |
Building hardware - Padlocks and padlock fittings - Requirements and test methods |
| EN 12321-2003 |
地下采礦機械鎧裝刮板運輸機安全要求規范 |
Underground mining machinery - Specification for the safety requirements of armoured scraper conveyors |
| EN 12323-1998 |
條碼符號學規范“16K碼” |
Bar coding - Symbology specifications - Code 16K |
| EN 12324-1-1998 |
灌溉技術輪機系統第1部分：尺寸系列 |
Irrigation techniques - Reel machine systems - Part 1: Size series |
| EN 12324-2-1999 |
灌溉技術輪機系統第2部分：輪機用聚乙烯管規范 |
Irrigation techniques - Reel machine systems - Part 2: Specifications of polyethylene tubes for reel machines |
| EN 12324-3-1999 |
灌溉技術輪機系統第3部分：技術特性表述 |
Irrigation techniques - Reel machine systems - Part 3: Presentation of technical characteristics |
| EN 12324-4-1999 |
灌溉技術輪機系統第4部分：用戶要求核對表 |
Irrigation techniques - Reel machine systems - Part 4: Check list of users requirements |
| EN 12325-1-1998 |
灌溉技術中心樞軸和橫移系統第1部分：技術特性的描述 |
Irrigation techniques - Centre pivot and moving lateral systems - Part 1: Presentation of the technical characteristics |
| EN 12325-2-1999 |
灌溉技術中心樞軸和橫移系統第2部分：最低性能和技術特性 |
Irrigation techniques - Centre pivot and moving lateral systems - Part 2: Minimum performances and technical characteristics |
| EN 12325-3-1999 |
灌溉技術中心樞軸和橫移系統第3部分：術語和分類 |
Irrigation techniques - Centre pivot and moving lateral systems - Part 3: Terminology and classification |
| EN 12326-1-2004 |
不連續屋頂材料和覆面用石板和石材.第1部分:產品規范 |
|
| EN 12326-2-2000 |
不連續屋頂及覆蓋層用石板和石材第2部分：試驗方法 |
Slate and stone products for discontinuous roofing and cladding - Part 2: Methods of test |
| EN 12326-2-2004 |
搭接屋頂材料和覆面用石板和石材.第2部分:試驗方法 |
|
| EN 12327-2000 |
供氣系統壓力試驗、試運轉和非試運轉程序功能要求 |
Gas supply systems - Pressure testing, commissioning and decommissioning procedures - Functional requirements |
| EN 12329-2000 |
金屬防腐鐵或鋼上帶輔助處理的鋅電鍍層 |
Corrosion protection of metals - Electrodeposited coatings of zinc with supplementary treatment on iron or steel |
| EN 1233-1996 |
水質 鉻測定 原子吸收光譜測定法 |
Water quality - Determination of chromium - Atomic absorption spectrometric methods |
| EN 12330-2000 |
金屬防腐鐵或鋼上的鎘電鍍層 |
Corrosion protection of metals - Electrodeposited coatings of cadmium on iron or steel |
| EN 12332-1-1998 |
橡膠或塑料涂覆織物脆裂強度的測定第1部分：鋼球法 |
Rubber or plastic coated fabrics - Determination of bursting strength - Part 1: Steel ball method |
| EN 12332-2-2002 |
橡膠或塑料涂覆織物脆裂強度的測定第2部分：靜壓法 |
Rubber- or plastic-coated fabrics - Determination of bursting strength - Part 2: Hydraulic method |
| EN 12334-2001 |
工業閥門鑄鐵止回閥 |
Industrial valves - Cast iron check valves |
| EN 12334-2004 |
工業閥門.鑄鐵控制閥門 |
|
| EN 12337-1-2000 |
建筑物玻璃化學加強堿石灰硅酸鹽玻璃第1部分：定義和描述 |
Glass in building - Chemically strengthened soda lime silicate glass - Part 1: Definition and description |
| EN 12337-2-2004 |
建筑物用玻璃.化學增強鈉鈣安全玻璃.第2部分:合格評價/產品標準 |
|
| EN 12338-1998 |
水質汞的測定汞齊化濃縮法 |
Water quality - Determination of mercury - Enrichment methods by amalgamation |
| EN 12339-1997 |
內河航運船舶繩索槽 |
Inland navigation vessels - Rope tubs |
| EN 123400-800-1992 |
能力詳細規范無貫通連接的撓性印制板 |
Capability detail specification;Flexible printed boards without through connections |
| EN 123400/prA1-1993 |
分規范：無貫通連接的撓性印制板修改prA1 |
Sectional specification: flexible printed boards without through connections; amendments |
| EN 12341-1998 |
空氣質量懸浮顆粒物PM10系數的測定標準方法和驗證測量方法標準等效性的現場試驗程序 |
Air quality - Determination of the PM10 fraction of suspended particulate matter - Reference method and field test procedure to demonstrate reference equivalence of measurement methods |
| EN 12342-1998 |
配合麻醉裝置和通風器使用的呼吸管 |
Breathing tubes intended for use with anaesthetic apparatus and ventilators |
| EN 12345-1998 |
焊接帶圖示的有關焊接接頭的多語種術語 |
Welding - Multilingual terms for welded joints with illustrations |
| EN 12346-1998 |
體操器械肋木、格梯和爬架安全要求和試驗方法 |
Gymnastic equipment - Wall bars, lattice ladders and climbing frames - Safety requirements and test methods |
| EN 12347-1998 |
生物技術蒸汽滅菌器和高壓消毒蒸鍋的性能標準 |
Biotechnology - Performance criteria for steam sterilizers and autoclaves |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com