標準號 |
中文名稱 |
英文名稱 |
| EN 835-1994 |
測定房間加熱散熱器消耗用的熱消耗分配器 以蒸發原則為基礎的不帶電能源的器具 |
Heat cost allocators for the determination of the consumption of room heating radiators - Appliances without an electrical energy supply, based on the evaporation principle |
| EN 836-1997 |
花園設備 電動剪草機 安全 |
Garden equipment - Powered lawnmowers - Safety |
| EN 836/A3-2004 |
園林設備.電動剪草機.安全 |
|
| EN 836/prA3-2003 |
花園設備 電動剪草機 安全 修改A3 |
Garden equipment - Powered lawnmowers - Safety; Amendment A3 / Note: Intended as an amendment to EN 836 (1997-03). |
| EN 837-2-1997 |
壓力計 第2部分：壓力計的選擇和安裝建議 |
Pressure gauges - Part 2: Selection and installation recommendations for pressure gauges |
| EN 837-3-1996 |
壓力計 第3部分：薄膜和封裝壓力計 尺寸、計量、要求和測試 |
Pressure gauges - Part 3: Diaphragm and capsule pressure gauges - Dimensions, metrology, requirements and testing |
| EN 838-1995 |
工作場所的空氣 測定氣體和水蒸汽用的擴散取樣器 要求和試驗方法 |
Workplace atmospheres - Diffusive samplers for the determination of gases and vapours - Requirements and test methods |
| EN 84-1997 |
木材防腐劑 生物測試之前的被處理木材的加速老化 浸濾程序 |
Wood preservatives - Accelerated ageing of treated wood prior to biological testing - Leaching procedure |
| EN 840-1-1997 |
移動式廢料箱 第1部分：梳形提升裝置用雙輪容積為80L至390L的裝料箱 尺寸和設計 |
Mobile waste containers - Part 1: Containers with 2 wheels with a capacity from 80 L to 390 L for comb lifting devices - Dimensions and design |
| EN 840-1-2004 |
移動式廢料箱.第1部分:梳齒形提升裝置用容積最大為400L的兩輪箱.尺寸和設計 |
|
| EN 840-2-1997 |
移動式廢料箱 第2部分：吊耳形和/或梳形提升裝置用四輪容積為500L至1200L帶平蓋的裝料箱 尺寸和設計 |
Mobile waste containers - Part 2: Containers with 4 wheels with a capacity from 500 L to 1200 L with flat lid(s), for trunnion and/or comb lifting devices - Dimensions and design |
| EN 840-2-2004 |
移動式廢料收集箱.第2部分:樞軸和/或梳齒形提升裝置用帶平蓋的容積為1300L及以下的4輪收集箱.尺寸和設計 |
|
| EN 840-3-1997 |
移動式廢料箱 第3部分：吊耳形和/或梳形提升裝置用四輪容積為770L至1300L帶圓頂蓋的裝料箱 尺寸和設計 |
Mobile waste containers - Part 3: Containers with 4 wheels with a capacity from 770 L to 1300 L with dome lid(s), for trunnion and/or comb lifting devices - Dimensions and design |
| EN 840-3-2004 |
移動式廢料收集箱.第3部分:樞軸和/或梳齒形提升裝置用帶圓蓋的容積為1300L及以下的4輪收集箱.尺寸和設計 |
|
| EN 840-4-2004 |
移動式廢料收集箱.第4部分:寬樞軸或BG和/或?qū)捠猃X形提升裝置用帶平蓋的容積為1700L及以下的4輪收集箱.尺寸和設計 |
|
| EN 840-5-2004 |
移動式廢料箱.第5部分:性能要求和試驗方法 |
|
| EN 840-6-2004 |
移動式廢料箱.第6部分:安全和健康要求 |
|
| EN 841-1995 |
條形碼 碼規范 格式描述 |
Bar coding - Symbology specifications - Format description |
| EN 842-1996 |
機械安全 可視危險信號 一般要求、設計和測試 |
Safety of machinery - Visual danger signals - General requirements, design and testing |
| EN 843-1-1995 |
先進技術陶瓷 單片陶瓷 室溫下的力學性能 第1部分：彎曲強度的測定 |
Advanced technical ceramics - Monolithic ceramics - Mechanical properties at room temperature - Part 1: Determination of flexural strength |
| EN 844-1-1995 |
圓木和鋸木 術語 第1部分：圓木和鋸木的通用術語 |
Round and sawn timber - Terminoloy - Part 1: General terms common to round timber and sawn timber |
| EN 844-10-1998 |
圓木和鋸木 術語 第10部分：與斑漬和真菌侵害有關的術語 |
Round and sawn timber - Terminology - Part 10: Terms relating to stain and fungal attack |
| EN 844-11-1998 |
圓木和鋸木 術語 第11部分：與昆蟲引起的降級有關的術語 |
Round and sawn timber - Terminology - Part 11: Terms relating to degrade by insects |
| EN 844-12-2000 |
圓木和鋸木 術語 第12部分：附加術語和總索引 |
Round and sawn timber - Terminology - Part 12: Additional terms and general index |
| EN 844-2-1997 |
圓木和鋸木 術語 第2部分：與圓木有關的通用術語 |
Round and sawn timber - Terminology - Part 2: General terms relating to round timber |
| EN 844-3-1995 |
圓木和鋸木 術語 第3部分：與鋸木有關的通用術語 |
Round and sawn timber - Terminoloy - Part 3: General terms relating to sawn timber |
| EN 844-4-1997 |
圓木和鋸木 術語 第4部分：與含水量有關的術語 |
Round and sawn timber - Terminology - Part 4: Terms relating to moisture content |
| EN 844-5-1997 |
圓木和鋸木 術語 第5部分：與圓木尺寸有關的術語 |
Round and sawn timber - Terminology - Part 5: Terms relating to dimensions of round timber |
| EN 844-6-1997 |
圓木和鋸木 術語 第6部分：與鋸木尺寸有關的術語 |
Round and sawn timber - Terminology - Part 6: Terms relating to dimensions of sawn timber |
| EN 844-7-1997 |
圓木和鋸木 術語 第7部分：與木材剖面結構有關的術語 |
Round and sawn timber - Terminology - Part 7: Terms relating to anatomical structure of timber |
| EN 844-8-1997 |
圓木和鋸木 術語 第8部分：與圓木性能有關的術語 |
Round and sawn timber - Terminology - Part 8: Terms relating to features of round timber |
| EN 844-9-1997 |
圓木和鋸木 術語 第9部分：與鋸木性能有關的術語 |
Round and sawn timber - Terminology - Part 9: Terms relating to features of sawn timber |
| EN 845-1-2003 |
磚石結構輔助部件規范 第1部分：拉桿、條板、支架和托架 |
Specification for ancillary components for masonry - Part 1: Ties, tension straps, hangers and brackets |
| EN 845-2-2003 |
磚石結構輔助部件規范 第2部分：過梁 |
Specification for ancillary components for masonry - Part 2: Lintels |
| EN 845-3-2003 |
磚石結構輔助部件規范 第3部分：鋼網底層接縫加固 |
Specification for ancillary components for masonry - Part 3: Bed joint reinforcement of steel meshwork |
| EN 846-10-2000 |
磚石結構輔助部件試驗方法 第10部分：托架負荷能力和負荷偏差特性的測定 |
Methods of test for ancillary components for masonry - Part 10: Determination of load capacity and load deflection characteristics of brackets |
| EN 846-11-2000 |
磚石結構輔助部件試驗方法 第11部分：過梁尺寸和彎曲度的測定 |
Methods of test for ancillary components for masonry - Part 11: Determination of dimensions and bow of lintels |
| EN 846-13-2001 |
磚石結構輔助部件試驗方法 第13部分：有機涂層抗沖擊、磨損和侵蝕性的測定 |
Methods of test for ancillary components of masonry - Part 13: Determination of resistance to impact, abrasion and corrosion of organic coatings |
| EN 846-2-2000 |
磚石結構輔助部件試驗方法 第2部分：灰漿接縫中預制底層接縫加固砌合強度的測定 |
Methods of test for ancillary components for masonry - Part 2: Determination of bond strength of prefabricated bed joint reinforcement in mortar joints |
| EN 846-3-2000 |
磚石結構輔助部件試驗方法 第3部分：預制底層接縫加固焊接剪切負荷量的測定 |
Methods of test for ancillary components for masonry - Part 3: Determination of shear load capacity of welds in prefabricated bed joint reinforcement |
| EN 846-4-2001 |
磚石結構輔助部件試驗方法 第4部分：條板負荷能力和負荷偏差特性的測定 |
Methods of tests for ancillary components for masonry - Part 4: Determination of load capacity and load-deflection characteristics of straps |
| EN 846-4-2004 |
圬工輔助部件的試驗方法.第4部分:固定夾板的負載容量和加載變形特性的測定 |
|
| EN 846-5-2000 |
磚石結構輔助部件試驗方法 第5部分：墻拉桿拉力、壓力負荷能力及負荷轉移特性的測定 (力偶試驗) |
Methods of test for ancillary components for masonry - Part 5: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couple test) |
| EN 846-6-2000 |
磚石結構輔助部件試驗方法 第6部分：墻拉桿拉力、壓力負荷能力及負荷轉移特性的測定 (單端試驗) |
Methods of test for ancillary components for masonry - Part 6: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test) |
| EN 846-7-2000 |
磚石結構輔助部件試驗方法 第7部分：抗剪拉桿和滑動拉桿剪切負荷能力和負荷位移特性的測定 (灰泥接縫連接 |
Methods of test for ancillary components for masonry - Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couple test for mortar joint connections) |
| EN 846-8-2000 |
磚石結構輔助部件試驗方法 第8部分：托梁架負荷能力和負荷偏差特性的測定 |
Methods of test for ancillary components for masonry - Part 8: Determination of load capacity and load-deflection characteristics of joist hangers |
| EN 846-9-2000 |
磚石結構輔助部件試驗方法 第9部分：過梁抗撓度和抗剪切度的測定 |
Methods of test for ancillary components for masonry - Part 9: Determination of flexural resistance and shear resistance of lintels |
| EN 847-3-2004 |
木工工具.安全性要求.第3部分:箝位設備 |
|
| EN 848-2-1998 |
木工機械的安全 帶旋轉工具的單邊制模機 第2部分：單軸手工加料/綜合加料機 |
Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle handfed/integrated fed routing machines |
| EN 848-3-1999 |
木工機械的安全 帶旋轉工具的單邊制模機 第3部分：數控(NC)鏜床和特形銑床 |
Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerical control (NC) boring machines and routing machines |
| EN 851-1995 |
鋁和鋁合金 生產烹調器具用的圓坯料 規范 |
Aluminium and aluminium alloys - Circle and circle stock for the production of culinary utensils - Specifications |
| EN 853-1996 |
橡膠軟管和軟管配件 金屬絲編織加強液壓型 規范 |
Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification |
| EN 854-1996 |
橡膠軟管和軟管配件 紡織增強液壓型 規范 |
Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification |
| EN 855-1996 |
塑料軟管和軟管配件 熱塑料織物增強液壓型 規范 |
Plastics hoses and hose assemblies - Thermoplastics textile reinforced hydraulic type - Specification |
| EN 856-1996 |
橡膠軟管和軟管配件 橡膠 包覆螺形線增強液壓型 規范 |
Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification |
| EN 857-1996 |
橡膠軟管和軟管配件 液壓設備用金屬絲編織增強壓制型 規范 |
Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification |
| EN 858-1-2002 |
輕液體(如油和汽油)分離系統 第1部分：產品設計、性能和測試、標志和質量控制的原則 |
Separator systems for light liquids (e.g. oil and petrol) - Part 1: Principles of product design, performance and testing, marking and quality control |
| EN 858-1-2004 |
輕液體(如油和汽油)用分離器裝置.第1部分:產品設計、性能和試驗、標記和質量控制的原則 |
|
| EN 858-2-2003 |
輕液體(如油和汽油)分離系統 第2部分：額定尺寸的選擇、安裝、操作和維修選擇 |
Separator systems for light liquids (e.g. oil and petrol) - Part 2: Selection of nominal size, installation, operation and maintenance |
| EN 859-1997 |
木工機械安全 人工加料表面刨床 |
Safety of woodworking machines - Handfed surface planing machines |
| EN 860-1997 |
木工機械安全 單面厚度刨床 |
Safety of woodworking machines - One side thickness planing machines |
| EN 861-1997 |
木工機械安全 表面刨平和厚度機械 |
Safety of woodworking machines - Surface planing and thicknessing machines |
| EN 862-2001 |
包裝 防兒童拆開的包裝 非藥物產品用不能再封包的包裝的要求和試驗程序/注：不包括2001年9月的修改通知 |
Packaging - Child-resistant packaging - Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products / Note: Includes Correction Notice of September 2001 |
| EN 863-1995 |
防護服 機械性能 試驗方法：抗穿透性 |
Protective clothing - Mechanical properties - Test method: Puncture resistance |
| EN 864-1996 |
醫用電氣設備 人用煙密度測定儀 特殊要求 |
Medical electrical equipment - Capnometers for use with humans - Particular requirements |
| EN 865-1997 |
脈沖血氧計 特殊要求 |
Pulse oximeters - Particular requirements |
| EN 866-1-1997 |
測試消毒器和消毒過程的生物系統 第1部分：一般要求 |
Biological systems for testing sterilizers and sterilization processes - Part 1: General requirements |
| EN 866-3-1997 |
測試消毒器和消毒過程的生物系統 第3部分：濕熱消毒器中使用的特殊系統 |
Biological systems for testing sterilizers and sterilization processes - Part 3: Particular systems for use in moist heat sterilizers |
| EN 866-4-1999 |
測試消毒器和消毒過程的生物系統 第4部分：照射消毒器中使用的特殊系統 |
Biological systems for testing sterilizers and sterilization processes - Part 4: Particular systems for use in irradiation sterilizers |
| EN 866-5-1999 |
測試消毒器和消毒過程的生物系統 第5部分：低溫蒸汽和甲醛消毒器中使用的特殊系統 |
Biological systems for testing sterilizers and sterilization processes - Part 5: Particular systems for use in low temperature steam and formaldehyde sterilizers |
| EN 866-6-1999 |
測試消毒器和消毒過程的生物系統 第6部分：干熱消毒器中使用的特殊系統 |
Biological systems for testing sterilizers and sterilization processes - Part 6: Particular systems for use in dry heat sterilizers |
| EN 866-7-1999 |
測試消毒器和消毒過程的生物系統 第7部分：濕熱消毒器中使用的自備生物指示器系統的特殊要求 |
Biological systems for testing sterilizers and sterilization processes - Part 7: Particular requirements for self-contained biological indicator systems for use in moist heat sterilizers |
| EN 866-8-1999 |
測試消毒器和消毒過程的生物系統 第8部分：乙烯氧化物消毒器中使用的自備生物指示器系統的特殊要求 |
Biological systems for testing sterilizers and sterilization processes - Part 8: Particular requirements for self-contained biological indicator systems for use in ethylene oxide sterilizers |
| EN 867-1-1997 |
消毒器中使用的非生物系統 第1部分：一般要求 |
Non-biological systems for use in sterilizers - Part 1: General requirements |
| EN 867-2-1997 |
消毒器中使用的非生物系統 第2部分：處理指示器(A級) |
Non-biological systems for use in sterilizers - Part 2: Process indicators (Class A) |
| EN 867-4-2000 |
消毒器中使用的非生物系統 第4部分：選擇蒸汽滲透探測用Bowie和Dick試驗之一的指示器規范 |
Non-biological systems for use in sterilizers - Part 4: Specification for indicators as an alternative to the Bowie and Dick test for the detection of steam penetration |
| EN 867-5-2001 |
消毒器中使用的非生物系統 第5部分：小型B型和S型滅菌器性能測試中使用的指示器系統和過程任務裝置規范 |
Non-biological systems for use in sterilizers - Part 5: Specification for indicator systems and process challenge devices for use in performance testing for small sterilizers type B and type S |
| EN 868-1-1997 |
經消毒的醫療器械用包裝材料和系統 第1部分：一般要求和試驗方法 |
Packaging materials and systems for medical devices which are to be sterilized - Part 1: General requirements and test methods |
| EN 868-10-2000 |
經消毒的醫療器械用包裝材料和系統 第10部分：生產熱密封袋、卷軸和蓋的聚烯烴粘性涂層非編織材料 要求和 |
Packaging materials and systems for medical devices which are to be sterilized - Part 10: Adhesive coated nonwoven materials of polyolefines for use in the manufacture of heat sealable pouches, reels and lids - Requirements and test methods |
| EN 868-2-1999 |
經消毒的醫療器械用包裝材料和系統 第2部分：消毒包裹物 要求和試驗方法 |
Packaging materials and systems for medical devices which are to be sterilized - Part 2: Sterilization wrap - Requirements and test methods |
| EN 868-3-1999 |
經消毒的醫療器械用包裝材料和系統 第3部分：生產紙袋（EN 868-4規定）和生產盒和卷筒用紙（EN 868-5規定 |
Packaging materials and systems for medical devices which are to be sterilized - Part 3: Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5) - Requirements and test met |
| EN 868-4-1999 |
經消毒的醫療器械用包裝材料和系統 第4部分：紙袋 要求和試驗方法 |
Packaging materials and systems for medical devices which are to be sterilized - Part 4: Paper bags - Requirements and test methods |
| EN 868-6-1999 |
經消毒的醫療器械用包裝材料和系統 第6部分：生產經氧化乙烯或輻照消毒的醫用包所用的紙 要求和試驗方法 |
Packaging materials and systems for medical devices which are to be sterilized - Part 6: Paper for the manufacture of packs for medical use for sterilization by ethylene oxide or irradiation - Requirements and test methods |
| EN 868-7-1999 |
經消毒的醫療器械用包裝材料和系統 第7部分：生產經氧化乙烯或輻射消毒的醫用熱密封包所用的粘性涂覆紙 |
Packaging materials and systems for medical devices which are to be sterilized - Part 7: Adhesive coated paper for the manufacture of heat sealable packs for medical use for sterilization by ethylene oxide or irradiation - Requirements and test methods |
| EN 868-8-1999 |
經消毒的醫療器械用包裝材料和系統 第8部分：符合EN 285的蒸汽消毒器用可重復使用的消毒容器 要求和試驗 |
Packaging materials and systems for medical devices which are to be sterilized - Part 8: Re-usable sterilization containers for steam sterilizers conforming to EN 285 - Requirements and test methods |
| EN 868-9-2000 |
經消毒的醫療器械用包裝材料和系統 第9部分：生產熱密封袋、卷軸和蓋的聚烯烴非涂層非編織材料 要求和試 |
Packaging materials and systems for medical devices which are to be sterilized - Part 9: Uncoated nonwoven materials of polyolefines for use in the manufacture of heat sealable pouches, reels and lids - Requirements and test methods |
| EN 869-1997 |
高壓金屬壓模鑄造器件的安全要求 |
Safety requirements for high pressure metal diecasting units |
| EN 87-1991 |
陶瓷地板和墻瓷磚 定義、分類、特性和標志 |
Ceramic floor and wall tiles - Definitions, classification, characteristics and marking |
| EN 872-1996 |
水質 懸浮微粒的測定 玻璃纖維過濾器過濾法 |
Water quality - Determination of suspended solids - Method by filtration through glass fibre filters |
| EN 873-1996 |
輕型傳送帶 主要特性和應用 |
Light conveyor belts - Principal characteristics and applications |
| EN 874-1995 |
氣焊設備 圓柱筒焊接用氧/燃料氣體焊炬（切割機型） 結構型式、一般規范和試驗方法 |
Gas welding equipment - Oxygen/fuel gas blowpipes (cutting machine type) of cylindrical barrel - Type of construction, general specifications, test methods |
| EN 875-1995 |
金屬材料焊接的破壞試驗 沖擊試驗 試樣定位、槽口取向和檢驗 |
Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination |
| EN 876-1995 |
金屬材料焊接的破壞試驗 熔焊接頭中焊接金屬的縱向拉伸試驗 |
Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints |
| EN 877-1999 |
建筑物排水用鑄鐵管和配件及其接頭和附件 要求、試驗方法和質量保證 |
Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance |
| EN 878-1997 |
人類用水處理用的化學制品 硫酸鋁 |
Chemicals used for treatment of water intended for human consumption - Aluminium sulfate |
| EN 878-2004 |
人類生活用水處理用化學試劑.硫酸鋁 |
|
| EN 88/prA2-2001 |
入口壓力200毫巴以下的燃氣器具的壓力調節閥 修改A2 |
Pressure governors for gas appliances for inlet pressures up to 200 mbar; Amendment prA2 |
| EN 881-1997 |
人類用水處理用的化學制品 氯化鋁、氯化鋁氫氧化物和硫酸鹽氯化鋁氫氧化物( 單體) |
Chemicals used for treatment of water intended for human consumption - Aluminium chloride, aluminium chloride hydroxide and aluminium chloride hydroxide sulfate (monomeric) |
| EN 882-1997 |
人類用水處理用的化學制品 鋁酸鈉 |
Chemicals used for treatment of water intended for human consumption - Sodium aluminate |
| EN 883-1997 |
人類用水處理用的化學制品 聚羥基氯化鋁和聚羥基硫酸鹽氯化鋁 |
Chemicals used for treatment of water intended for human consumption - Polyaluminium chloride hydroxide and polyaluminium chloride hydroxide sulfate |
| EN 885-2001 |
人類用水處理用的化學制品 多硅酸鹽氯化鋁氫氧化物 |
Chemicals used for treatment of water intended for human consumption - Polyaluminium chloride hydroxide silicate |
| EN 88528-11-2004 |
往復式內燃機驅動交流發電機組.第11部分:旋轉不間斷電力系統.性能要求和試驗方法 |
|
| EN 886-2001 |
人類用水處理用的化學制品 多硅酸鹽硫酸鹽鋁氫氧化物 |
Chemicals used for treatment of water intended for human consumption - Polyaluminium hydroxide silicate sulfate |
| EN 887-2001 |
人類用水處理用的化學制品 硫酸鹽三鐵鋁 |
Chemicals used for treatment of water intended for human consumption - Aluminium iron(III) sulfate |
| EN 888-1998 |
人類用水處理用的化學制品 氯化鐵(III) |
Chemicals used for treatment of water intended for human consumption - Iron(III)chloride |
| EN 889-1998 |
人類用水處理用的化學制品 硫化鐵(II) |
Chemicals used for treatment of water intended for human consumption - Iron(II)sulfate |
| EN 890-1998 |
人類用水處理用的化學藥品 硫化鐵(III) |
Chemicals used for treatment of water intended for human consumption - Iron(III)sulfate |
| EN 891-1998 |
人類用水處理用的化學藥品 氯硫化鐵(III) |
Chemicals used for treatment of water intended for human consumption - Iron(III)chloride sulfate |
| EN 892-1996 |
登山設備 動態登山繩索 安全要求和試驗方法 |
Mountaineering equipment - Dynamic mountaineering ropes - Safety requirements and test methods |
| EN 892-2004 |
登山設備.動力攀登繩.安全要求和檢驗方法 |
|
| EN 893-1999 |
登山設備 鞋底釘 安全要求和試驗方法 |
Mountaineering equipment - Crampons - Safety requirements and test methods |
| EN 894-1-1997 |
機械安全 顯示器和控制致動器設計的人類工程學要求 第1部分：人與顯示器和控制致動器相互作用的一般原則 |
Safety of machinery - Ergonomic requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators |
| EN 894-2-1997 |
機械安全 顯示器和控制致動器設計的人類工程學要求 第2部分：顯示器 |
Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays |
| EN 894-3-2000 |
機械安全 顯示器和控制致動器設計的人類工程學要求 第3部分：控制致動器 |
Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators |
| EN 895-1995 |
金屬材料焊接的破壞試驗 橫向抗拉試驗 |
Destructive tests on welds in metallic materials - Transverse tensile test |
| EN 896-1998 |
人類用水處理用的化學制品 氫氧化鈉 |
Chemicals used for treatment of water intended for human consumption - Sodium hydroxide |
| EN 897-1998 |
人類用水處理用的化學制品 碳酸鈉 |
Chemicals used for treatment of water intended for human consumption - Sodium carbonate |
| EN 898-1998 |
人類用水處理用的化學制品 碳酸氫鈉 |
Chemicals used for treatment of water intended for human consumption - Sodium hydrogen carbonate |
| EN 899-2003 |
人類用水處理用的化學制品 硫酸 |
Chemicals used for treatment of water intended for human consumption - Sulfuric acid |
| EN 900-1999 |
人類用水處理用的化學制品 次氯酸鈣 |
Chemicals used for treatment of water intended for human consumption - Calcium hypochlorite |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com