標準號 |
中文名稱 |
英文名稱 |
| DIN EN 1529-2000 |
門扉.高度、寬度、厚度和面積.公差級 |
(Door leaves - Height, width, thickness and squareness - Tolerance classes; German version EN 1529:1999) |
| DIN EN 153-1995 |
接電網的家用冷凍,深冷凍,冷藏和相關設備的電能消耗及其有關性能的測量方法 |
(Methods of measuring the energy consumption of electric mains operated household refrigerators, frozen food storage cabinets, food freezers and their combinations, together with associated characteristics; German version EN 153:1995) |
| DIN EN 1530-2000 |
門扉.一般和局部平整度.公差級 |
(Door leaves - General and local flatness - Tolerance classes; German version EN 1530:1999) |
| DIN EN 153000-1999 |
總規范.壓力觸點單一大功率半導體件(資格認證) |
(Generic specification: Discrete pressure contact power semiconductor devices (Qualification approval); German version EN 153000:1998) |
| DIN EN 1532-1997 |
液化天然氣用安裝設備.海濱交接船舶 |
(Installations and equipment for liquefied natural gas - Ship to shore interface; German version EN 1532:1997) |
| DIN EN 1533-2000 |
木和鑲木地板.彎曲性能的測定.試驗方法 |
(Wood and parquet flooring - Determination of bending properties - Test methods; German version EN 1533:2000) |
| DIN EN 1534-2000 |
木和鑲木地板.壓痕阻力的測定(布氏硬度).試驗方法 |
(Wood and parquet flooring - Determination of resistance to indentation (Brinell) - Test method; German version EN 1534:2000) |
| DIN EN 1536-1999 |
特殊的土木工程工作的實施(特殊的地下工程).管樁 |
(Execution of special geotechnical work - Bored piles; German version EN 1536:1999) |
| DIN EN 1537-2001 |
特殊土工作業.地錨 |
(Execution of special geotechnical works - Ground anchors; German version EN 1537:1999 + AC:2000) |
| DIN EN 1538-2000 |
特殊土工工作的施工.隔墻 |
(Execution of special geotechnical works - Diaphragm walls; German version EN 1538:2000) |
| DIN EN 1539-2000 |
釋放可燃物質的干燥機和爐.安全要求 |
(Dryers and ovens, in which flammable substances are released - Safety requirements; German version EN 1539:2000) |
| DIN EN 1540-1998 |
工作場地的大氣環境.專業術語 |
(Workplace atmospheres - Terminology; Trilingual version EN 1540:1998) |
| DIN EN 1541-2001 |
和食品接觸的紙和紙板.水萃取物中甲醛的測定 |
(Paper and board intended to come into contact with foodstuffs - Determination of formaldehyde in an aqueous extract; German version EN 1541:2001) |
| DIN EN 1542-1999 |
混凝土支承結構的防護和維修用產品和系統.檢驗方法.撕裂試驗中粘附強度的測量 |
(Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off; German version EN 1542:1999) |
| DIN EN 1543-1998 |
混凝土結構的保護和修理用的產品和系統.檢驗方法.聚合物延伸的抗拉強度測定 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of tensile strength development for polymers; German version EN 1543:1998) |
| DIN EN 1546-1-2000 |
識別卡系統.內部電子錢包.第1部分:定義,概念和結構.德文版本EN1546-1:1999 |
(Identification card systems - Inter-sector electronic purse - Part 1: Definitions, concepts and structures; German version EN 1546-1:1999) |
| DIN EN 1546-2-2000 |
識別卡系統.內部電子錢包.第2部分:安全結構 |
(Identification card systems - Inter-sector electronic purse - Part 2: Security architecture; German version EN 1546-2:1999) |
| DIN EN 1546-3-2001 |
識別卡系統.內部電子錢包.第3部分:數據和交換 |
(Identification card systems - Inter-sector electronic purse - Part 3: Data elements and interchanges; German version EN 1546-3:1999) |
| DIN EN 1546-4-2000 |
識別卡系統.內部電子錢包.第4部分:數據目標 |
(Identification card systems - Inter-sector electronic purse - Part 4: Data objects; German version EN 1546-4:1999) |
| DIN EN 1547-2001 |
工業熱加工設備.工業熱加工設備和其附屬處理設備的噪音試驗規程 |
(Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment; German version EN 1547:2001) |
| DIN EN 1550-1997 |
機床的安全性.工件夾具用卡盤的設計和結構的安全性要求 |
(Machine-tools safety - Safety requirements for the design and construction of work holding chucks; German version EN 1550:1997) |
| DIN EN 1551-2001 |
工業用貨車的安全性.容量為10000kg的自動推進式貨車 |
(Safety of industrial trucks - Self propelled trucks over 10000 kg capacity; German version EN 1551:2000) |
| DIN EN 1552-2003 |
地下采礦機械.工作面上的移動式采掘機械.截裝機和開溝機系統的安全要求 |
(Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems; German version EN 1552:2003) |
| DIN EN 1553-2000 |
農業機械.農業自走式、懸掛式、半懸掛式和牽引式機械.通用安全要求 |
(Agricultural machinery - Agricultural self-propelled, mounted, semi-mounted and trailed machines - Common safety requirements; German version EN 1553:1999) |
| DIN EN 1554-1999 |
輸送帶.卷筒摩擦檢驗 |
(Conveyor belts - Drum friction testing; German version EN 1554:1998) |
| DIN EN 1555-1-2003 |
氣體燃料的塑料管道供應系統.聚乙烯(PE).第1部分:總則 |
(Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General; German version EN 1555-1:2002) |
| DIN EN 1555-2-2003 |
氣體燃料的塑料管道供應系統.聚乙烯(PE).第2部分:管道 |
(Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 2: Pipes; German version EN 1555-2:2002) |
| DIN EN 1555-3-2003 |
氣體燃料的塑料管道供應系統.聚乙烯(PE).第3部分:配件 |
(Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings; German version EN 1555-3:2002) |
| DIN EN 1555-4-2003 |
氣體燃料的塑料管道供應系統.聚乙烯(PE).第4部分:閥門 |
(Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves; German version EN 1555-4:2002) |
| DIN EN 1555-5-2003 |
氣體燃料的塑料管道供應系統.聚乙烯(PE).第5部分:系統的適用性 |
(Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 5: Fitness for purpose of the system; German version EN 1555-5:2002) |
| DIN EN 1556-1998 |
條碼.專業術語 |
(Bar coding - Terminology; German version EN 1556:1998) |
| DIN EN 1557-1997 |
表面活化劑.作為X-,Y-和Z-傳輸三色值的光學清晰著色液(產品)的色度測量特性 |
(Surface active agents - Colorimetric characterization of optically clear coloured liquids (products) as X, Y, Z tristimulus values in transmission; German version EN 1557:1996) |
| DIN EN 1559-1-1997 |
鑄造.交貨技術條件.第1部分:概述 |
(Founding - Technical conditions of delivery - Part 1: General; German version EN 1559-1:1997) |
| DIN EN 1559-2-2000 |
鑄造.交貨技術條件.第2部分:鋼鑄件附加要求 |
(Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings; German version EN 1559-2:2000) |
| DIN EN 1559-3-1997 |
鑄造.交貨技術條件.第3部分:鐵鑄件附加要求 |
(Founding - Technical conditions of delivery - Part 3: Additional requirements for iron castings; German version EN 1559-3:1997) |
| DIN EN 1559-4-1999 |
鑄造.交貨技術條件.第4部分:鋁合金鑄件的附加要求 |
(Founding - Technical conditions of delivery - Part 4: Additional requirements for aluminium alloy castings; German version EN 1559-4:1999) |
| DIN EN 1559-5-1998 |
鑄造.交貨技術條件.第5部分:鎂合金鑄件的附加要求 |
(Founding - Technical conditions of delivery - Part 5: Additional requirements for magnesium alloy castings; German version EN 1559-5:1997) |
| DIN EN 1559-6-1999 |
鑄造.交貨技術條件.第6部分:鋅合金鑄件的附加要求 |
(Founding - Technical conditions of delivery - Part 6: Additional requirements for zinc alloy castings; German version EN 1559-6:1998) |
| DIN EN 1560-1997 |
鑄造.鑄鐵用標識系統.材料縮寫標識和材料號碼 |
(Founding - Designation system for cast iron - Material symbols and material numbers; German version EN 1560:1997) |
| DIN EN 1561-1997 |
鑄造.帶片狀石墨的鑄鐵 |
(Founding - Grey cast irons; German version EN 1561:1997) |
| DIN EN 1563-2003 |
鑄造.球墨鑄鐵(包括修改A1:2002) |
(Founding - Spheroidal graphit cast irons (includes amendment A1:2002); German version EN 1563:1997 + A1:2002) |
| DIN EN 1563-2005 |
鑄造.球墨鑄鐵 |
|
| DIN EN 1564-1997 |
鑄造.貝氏體鑄鐵 |
(Founding - Austempered ductile cast irons; German version EN 1564:1997) |
| DIN EN 1565-1-1999 |
建筑結構中污物和廢水排放(低溫和高溫)用塑料管道系統.苯乙烯共聚混合物(SAN+PVC).第1部分:管道、配件和系 |
(Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Styrene copolymer blends (SAN+PVC) - Part 1: Specifications for pipes, fittings and the system; German version EN 1565-1:1998) |
| DIN EN 1566-1-1999 |
建筑結構中污物和廢水排放(低溫和高溫)用塑料管道系統.氯化聚氯乙烯(PVC-C).第1部分:管道、配件和系統規范 |
(Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: Specifications for pipes, fittings and the system; German version EN 1566-1:1998) |
| DIN EN 1567-2000 |
建筑閥門.水減壓閥和組合水減壓閥.要求和試驗 |
(Building valves - Water pressure reducing valves and combination water pressure reducing valves - Requirements and tests; German version EN 1567:1999) |
| DIN EN 1568-1-2001 |
滅火媒介.泡沫濃縮物.第1部分:非水溶液體表面應用的媒介膨脹泡沫濃縮物 |
(Fire extinguishing media - Foam concentrates - Part 1: Specification for medium expansion foam concentrates for surface application to water-immiscible liquids; German version EN 1568-1:2000) |
| DIN EN 1568-2-2001 |
滅火媒介.泡沫濃縮物.第2部分:非水溶液體表面應用的高膨脹泡沫濃縮物規范 |
(Fire extinguishing media - Foam concentrates - Part 2: Specifications for high expansion foam concentrates for surface application to water-inmiscible liquids; German version EN 1568-2:2000) |
| DIN EN 1568-3-2001 |
滅火媒介.泡沫濃縮物.第3部分:非水溶液體表面應用的低膨脹泡沫濃縮物規范 |
(Fire extinguishing media - Foam concentrates - Part 3: Specification for low expansion foam concentrates for surface application to water-inmiscible liquids; German version EN 1568-3:2000) |
| DIN EN 1568-4-2001 |
滅火媒介.泡沫濃縮物.第4部分:水溶液體表面應用的低膨脹泡沫濃縮物規范 |
(Fire extinguishing media - Foam concentrates - Part 4: Specification for low expansion foam concentrates for surface application to water-miscible liquids; German version EN 1568-4:2000) |
| DIN EN 1569-2000 |
運動場表面.滾動荷載下狀態的測定 |
(Surfaces for sports areas - Determination of the behaviour under a rolling load; German version EN 1569:1999) |
| DIN EN 1570-1998 |
升降臺的安全要求 |
(Safety requirements for lifting tables; German version EN 1570:1998) |
| DIN EN 1570/A1-2004 |
升降臺的安全要求 |
|
| DIN EN 1571-1997 |
條形碼.數據標識 |
(Bar coding - Data identifiers; German version EN 1571:1996) |
| DIN EN 1572-1997 |
條形碼.傳輸單用唯一的識別符 |
(Bar coding - Unique identifier for transport units; German version EN 1572:1996) |
| DIN EN 1573-1997 |
條形碼.多種行業重疊的傳輸標簽 |
(Bar coding - Multi industry transport label; German version EN 1573:1996) |
| DIN EN 159-1991 |
高吸水量E10%的干擠壓成形的陶瓷磚和板.BIII組 |
(Dust-pressed ceramic tiles with a high water absorption E10%; (group BIII); german version EN 159:1991) |
| DIN EN 1591-1 Bb.1-2001 |
法蘭及其接頭.有襯墊的圓形法蘭接頭的設計規則.背景信息 |
(Flanges and their joints - Design rules for gasketed circular flange connections - Background information; German version CR 13642:1999) |
| DIN EN 1591-1-2001 |
法蘭及其接頭.有襯墊的圓形法蘭接頭的設計規則.第1部分:計算方法 |
(Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation method; German version EN 1591-1:2001) |
| DIN EN 1592-1-1997 |
鋁和鋁合金.HF縱縫焊接管.第1部分:技術交流條件 |
(Aluminium and aluminium alloys - HF seam welded tubes - Part 1: Technical conditions for inspection and delivery; German version EN 1592-1:1997) |
| DIN EN 1592-2-1997 |
鋁和鋁合金.HF縱縫焊接管.第2部分:機械性能 |
(Aluminium and aluminium alloys - HF seam welded tubes - Part 2: Mechanical properties; German version EN 1592-2:1997) |
| DIN EN 1592-3-1997 |
鋁和鋁合金.HF縱縫焊接管.第3部分:圓管的極限尺寸和形狀公差 |
(Aluminium and aluminium alloys - HF seam welded tubes - Part 3: Tolerances on dimensions and form for circular tubes; German version EN 1592-3:1997) |
| DIN EN 1592-4-1997 |
鋁和鋁合金.HF縱縫焊接管.第4部分:正方形,長方形和成形管的極限尺寸和形狀公差 |
(Aluminium and aluminium alloys - HF seam welded tubes - Part 4: Tolerances on dimensions and form for square, rectangular and shaped tubes; German version EN 1592-4:1997) |
| DIN EN 1593-1999 |
無損檢驗.漏泄試驗.起泡技術 |
(Non-destructive testing - Leak testing - Bubble emission techniques; German version EN 1593:1999) |
| DIN EN 1594-2000 |
供氣系統.最大使用壓力大于16巴的管道.功能要求 |
(Gas supply systems - Pipelines for maximum operating pressure over 16 bar - Functional requirements; German version EN 1594:2000) |
| DIN EN 1595-1997 |
硼硅酸鹽玻璃3.3制壓力設備.計算,制造和檢驗的一般原理 |
(Pressure equipment made from borosilicate glass 3.3 - General rules for design, manufacture and testing; German version EN 1595:1997) |
| DIN EN 1596-1998 |
液化氣裝置的規范.位置移動和可便攜的非家用不帶強制對流熱交換器的熱空氣發生器 |
(Specification for dedicated liquefied petroleum gas appliances - Mobile and portable non-domestic forced convection direct fired air heaters; German version EN 1596:1998) |
| DIN EN 1596-2005 |
專用于液化石油器的規范.移動式和便攜式非家用強制對流直燃式空氣加熱器 |
|
| DIN EN 1597-1-1997 |
焊料.試驗方法.第1部分:鋼、鎳和鎳合金中全焊接金屬試樣的試件 |
(Welding consumables - Test methods - Part 1: Test piece for all-weld metal test specimens in steel, nickel and nickel alloys; German version EN 1597-1:1997) |
| DIN EN 1597-2-1997 |
焊料.試驗方法.第2部分:單道和雙道焊接鋼試樣試驗用試件的制備 |
(Welding consumables - Test methods - Part 2: Preparation of test piece for single-run and two-run technique test specimens in steel; German version EN 1597-2:1997) |
| DIN EN 1597-3-1997 |
焊料.試驗方法.第3部分:角焊中焊料定位能力的測試 |
(Welding consumables - Test methods - Part 3: Testing of positional capability of welding consumables in a fillet weld; German version EN 1597-3:1997) |
| DIN EN 1598-2002 |
焊接和類似工藝的健康保護和安全.電弧焊工藝用透明焊接隔板、板條和屏簾 |
(Health and safety in welding and allied processes - Transparent welding curtains, strips and screens for arc welding processes (includes Amendment A1:2001); German version EN 1598:1997 + A1:2001) |
| DIN EN 1599-1997 |
焊接添加劑.抗蠕變鋼手工電弧焊用藥皮電焊條.分類 |
(Welding consumables - Covered electrodes for manual metal arc welding of creep-resisting steels - Classification; German version EN 1599:1997) |
| DIN EN 1600-1997 |
焊接添加劑.不銹鋼和耐熱鋼手工金屬電弧焊用藥皮電焊條.分類 |
(Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat resisting steels - Classification; German version EN 1600:1997) |
| DIN EN 160000-1994 |
總規范.電子學模塊單位 |
(Generic specification: modular electronic units; German version EN 160000:1993) |
| DIN EN 160000/A1-1996 |
總規范.電子學用調制單位 |
(Generic specification: Modular electronic units; German version EN 160000:1993/A1:1995) |
| DIN EN 1601-1997 |
液化石油制品.無鉛汽油.用氣相色譜法(O-FID)測定含氧有機化合物和有機合成氧的全部成份 |
(Liquid petroleum products - Unleaded petrol - Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography (O-FID); German version EN 1601:1997) |
| DIN EN 160100-1998 |
分規范.可裝配經質量評定合格的印制電路板的廠家的資格認證 |
(Sectional specification - Capability approval of manufacturers of printed board assemblies of assessed quality; German version EN 160100:1997) |
| DIN EN 160101-1999 |
空白詳細規范.經質量評定的裝有電子模塊的印制電路板.合格認證 |
(Blank detail specification: Printed board assembly modular electronic units of assessed quality - Capability approval; German version EN 160101:1998) |
| DIN EN 1602-1997 |
建筑物用熱絕緣產品.表觀密度的測定 |
(Thermal insulating products for building applications - Determination of the apparent density; German version EN 1602:1996) |
| DIN EN 160200-1-1998 |
分規范.經質量鑒定的電子微波調制組件.第1部分:性能鑒定 |
(Sectional specification: Microwave modular electronic units of assessed quality - Part 1: Capability approval procedure; German version EN 160200-1:1997) |
| DIN EN 160200-2-1998 |
分規范.經質量鑒定的電子微波調制組件.第2部分:試驗方法目錄 |
(Sectional specification: Microwave modular electronic units of assessed quality - Part 2: Index of test methods; German version EN 160200-2:1997) |
| DIN EN 160201-1998 |
空白詳細規范.經質量鑒定的電子微波調制組件.性能鑒定 |
(Blank detail specification: Microwave modular electronic units of assessed quality - Capability approval; German version EN 160201:1997) |
| DIN EN 1603-1997 |
建筑用絕熱材料.標準氣候下尺寸穩定性測試 |
(Thermal insulating products for building applications - Determination of dimensional stability under constant normal laboratory conditions (23 C/50 % relative humidity); German version EN 1603:1996) |
| DIN EN 1604-1997 |
建筑物用熱絕緣產品.明確確定的溫度和濕度條件下尺寸穩定性測定 |
(Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions; German version EN 1604:1996) |
| DIN EN 1605-1997 |
建筑物用熱絕緣產品.明確確定的壓力負荷和溫度負荷條件下變形測定 |
(Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions; German version EN 1605:1996) |
| DIN EN 1606-1997 |
建筑用絕熱材料.壓力負荷下長期蠕變性能的測定 |
(Thermal insulating products for building applications - Determination of compressive creep; German version EN 1606:1994) |
| DIN EN 1607-1997 |
建筑物用熱絕緣產品.與面垂直的抗拉強度的測定 |
(Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces; German version EN 1607:1996) |
| DIN EN 1608-1997 |
建筑物用熱絕緣產品.板平面上抗拉強度的測定 |
(Thermal insulating products for building applications - Determination of tensile strength parallel to faces; German version EN 1608:1996) |
| DIN EN 1609-1997 |
建筑用絕熱材料.短時部分浸入時吸水量測定 |
(Thermal insulating products for building applications - Determination of short term water absorption by partial immersion; German version EN 1609:1996) |
| DIN EN 161-2002 |
氣焊槍和燃?xì)馄骶哂米詣雨P(guān)閉閥 |
(Automatic shut-off valves for gas burners and gas appliances; German version EN 161:2001) |
| DIN EN 1610 Bb.1-1997 |
下水管道的鋪設和檢驗.相關標準和規范的目錄 |
(Construction and testing of drains and sewers - List of relevant standards and guidelines (status as of 1997-02)) |
| DIN EN 1610-1997 |
下水管道的鋪設和檢驗 |
(Construction and testing of drains and sewers; German version EN 1610:1997) |
| DIN EN 1611-1-2002 |
鋸材.軟木的表面分級.第1部分:歐洲云杉、冷杉、松樹和黃杉 |
(Sawn timber - Appearance grading of softwoods - Part 1: European spruces, firs, pines, Douglas firs and larches (including amendment 1:2002); German version EN 1611-1:1999 + A1:2002) |
| DIN EN 1612-1-1997 |
橡膠和塑料加工機械.反作用鑄造機.第1部分:測定和混合設備的安全要求 |
(Rubber and plastics machines - Reaction moulding machines - Part 1: Safety requirements for metering and mixing units; German version EN 1612-1:1997) |
| DIN EN 1612-2-2000 |
橡膠和塑料機械.反應性制模機械.第2部分:反應性制模設備的安全要求 |
(Rubber and plastics machines - Reaction moulding machines - Part 2: Safety requirements for reaction moulding plant; German version of EN 1612-2:2000) |
| DIN EN 1615-2001 |
一次性使用的內臟營養導管和輸送器以及連接器.設計和試驗 |
(Enteral feeding catheters and giving sets for single use and their connectors - Design and testing; German version EN 1615:2000) |
| DIN EN 1616-1999 |
一次性使用無菌膀胱導管 |
(Sterile uretheral catheters for single use (includes Amendment A1:1999); German version EN 1616:1997 + A1:1999) |
| DIN EN 1617-1997 |
一次性使用無菌引流導管和附件 |
(Sterile drainage catheters and accessory devices for single use; German version EN 1617:1997) |
| DIN EN 1618-1997 |
非脈管內導管.一般性能的檢驗方法 |
(Catheters other than intravascular catheters - Test methods for common properties; German version EN 1618:1997) |
| DIN EN 1619-1996 |
生物工程.大比例方法和生產.原菌株保存過程中的管理及組織的一般要求 |
(Biotechnology - Large-scale process and production - General requirements for management and organization for strain conservation procedures; German version EN 1619:1996) |
| DIN EN 1620-1996 |
生物技術.大比例法和生產.與相關危險等級相應的建筑物 |
(Biotechnology - Large-scale process and production - Plant building according to the degree of hazard; German version EN 1620:1996) |
| DIN EN 1621-1-1998 |
摩托車手抗機械沖擊用防護服.第1部分:沖擊防護裝置的要求和檢驗方法 |
(Motorcyclists` protective clothing against mechanical impact - Part 1: Requirements and test methods for impact protectors; German version EN 1621-1:1997) |
| DIN EN 1622-1998 |
水質.氣味極限值(TON)和味道極限值(TFN)的測定 |
(Water quality - Determination of the threshold odour number (TON) and threshold flavour number (TFN); German version EN 1622:1997) |
| DIN EN 1624-1999 |
紡織物和紡織制品.工業和技術紡織品的燃燒特性.測定垂直試樣火焰蔓延的方法 |
(Textiles and textile products - Burning behaviour of industrial and technical textiles - Procedure to determine the flame spread of vertically oriented specimens; German version EN 1624:1999) |
| DIN EN 1625-1999 |
紡織物和紡織制品.工業和技術紡織品的燃燒特性.測定垂直試樣易燃性的方法 |
(Textiles and textile products - Burning behaviour of industrial and technical textiles - Procedure to determine the ignitability of vertically oriented specimens; German version EN 1625:1999) |
| DIN EN 1626-1999 |
冷凝劑罐.低溫冷卻用閉鎖閥門 |
(Cryogenic vessels - Valves for cryogenic service; German version EN 1626:1999) |
| DIN EN 163100-1996 |
分規范.集成混合電路和集成層電路 |
(Sectional specification: Film and hybrid integrated circuits; German version EN 163100:1991) |
| DIN EN 163101-1996 |
空白詳細規范.集成混合電路和集成層電路 |
(Blank detail specification: Film and hybrid integrated circuits; German version EN 163101:1991) |
| DIN EN 1634-1-2000 |
門和百頁門組件的防火試驗.第1部分:防火門和百頁門 |
(Fire resistance tests for door and shutter assemblies - Part 1: Fire doors and shutters; German version EN 1634-1:2000) |
| DIN EN 1634-3-2002 |
門和遮板組件的耐火性試驗.第3部分:防煙門和遮板 |
(Fire resistance tests for door and shutter assemblies - Part 3: Smoke control doors and shutters; German version EN 1634-3:2001) |
| DIN EN 1634-3-2005 |
門和遮板組件的耐火性試驗.第3部分:防煙門和遮板 |
|
| DIN EN 1636-3-1999 |
常壓排水管和下水道用塑料管道系統.不飽和聚酯樹脂(UP)玻璃纖維增強熱固塑料(GRP).第3部分:配件 |
(Plastics piping systems for non-pressure drainage and sewerage - Glassreinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 3: Fittings; German version EN 1636-3:1997) |
| DIN EN 1636-5-1999 |
常壓排水管和下水道用塑料管道系統.不飽和聚酯樹脂(UP)玻璃纖維增強熱固塑料(GRP).第5部分:接頭的適應性 |
(Plastics piping systems for non-pressure drainage and sewerage - Glassreinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 5: Fitness for purpose of the joints; German version EN 1636-5:1997) |
| DIN EN 1636-6-1999 |
常壓排水管和下水道用塑料管道系統.不飽和聚酯樹脂(UP)玻璃纖維增強熱固塑料(GRP).第6部分:安裝實施規范 |
(Plastics piping systems for non-pressure drainage and sewerage - Glassreinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 6: Practices for installation; German version EN 1636-6:1997) |
| DIN EN 1637-1999 |
輕質輸送帶.電阻測量的試驗方法 |
(Light conveyor belts - Test methods for the measurement of the electrical resistances; German version EN 1637:1999) |
| DIN EN 1638-1997 |
塑料管道系統.玻璃纖維增強熱固性塑料(GFK)管.圓筒內壓作用的檢驗方法 |
(Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Test method for the effects of cyclic internal pressure; German version EN 1638:1997) |
| DIN EN 1639-1996 |
牙科學.牙科用醫療產品.器械 |
(Dentistry - Medical devices for dentistry - Instruments; German version EN 1639:1996) |
| DIN EN 1639-2004 |
牙科學.牙科用醫療器械.儀器 |
|
| DIN EN 1640-1996 |
牙科學.牙科用醫療產品.裝備 |
(Dentistry - Medical devices for dentistry - Equipment; German version EN 1640:1996) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com