標準號 |
中文名稱 |
英文名稱 |
| DIN EN 61094-4-1996 |
測試傳聲器.第4部分:使用標準傳聲器的要求 |
(Measurement microphones - Part 4: Specifications for working standard microphones (IEC 61094-4:1995); German version EN 61094-4:1995) |
| DIN EN 61094-5-2003 |
測量傳聲器.第5部分:通過比對進行工作標準傳聲器的壓力校準的方法 |
(Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison (IEC 61094-5:2001); German version EN 61094-5:2001) |
| DIN EN 61094-6-2005 |
測量傳聲器.第6部分:頻率響應測定用靜電傳動裝置(IEC 61094-6-2004) |
|
| DIN EN 61095-2001 |
家用及類似用途的機電接觸器 |
(Electromechanical contactors for household and similar purposes (IEC 61095:1992 + A1:2000); German version EN 61095:1993 + A1:2000) |
| DIN EN 61096-1993 |
數字音頻激光唱盤放音設備特性的測量方法 |
(Methods of measuring the characteristics of reproducing equipment for digital audio compact discs (IEC 61096:1992); German version EN 61096:1993) |
| DIN EN 61096/A1-1998 |
數字音響壓縮盤用重放設備特性的測量方法.修改A1 |
(Methods of measuring the characteristics of reproducing equipment for digital audio compact discs; (IEC 61096:1992/A1:1996); Amendment A1; German version EN 61096:1993/A1:1996) |
| DIN EN 61097-1-1994 |
海上呼救和安全裝置.第1部分:雷達發射機應答器.海上搜索和營救設備.操作和功能要求.試驗方法和規定試驗結果 |
(Global maritime distress and safety system (GMDSS); part 1: radar transponder; marine search and rescue (SART); operational and performance requirements, methods of testing and required test results (IEC 61097-1:1992); German version EN 61097-1:1993) |
| DIN EN 61099-1994 |
電工用新的合成有機酯規范 |
(Specifications for unused synthetic organic esters for electrical purposes (IEC 61099:1992); German version EN 61099:1992) |
| DIN EN 611-1-1995 |
錫和錫合金.錫合金和錫裝置.第1部分:錫合金 |
(Tin and tin alloys - Pewter and pewterware - Part 1: Pewter; German version EN 611-1:1995) |
| DIN EN 611-2-1996 |
錫和錫合金.錫合金和錫裝置.第2部分:錫裝置 |
(Tin and tin alloys - Pewter and pewterware - Part 2: Pewterware; German version EN 611-2:1996) |
| DIN EN 61100-1994 |
絕緣液體按著火點和凈熱值分類 |
(Classification of insulating liquids according to fire-point and net calorific value (IEC 61100:1992); German version EN 61100:1992) |
| DIN EN 61101-1994 |
采用頻率范圍為0.5MHz至15MHz的平面掃描技術對水聽器的絕對校準 |
(The absolute calibration of hydrophones using the planar scanning technique in the frequency range 0,5 MHz to 15 MHz (IEC 61101:1991); German version EN 61101:1993) |
| DIN EN 61102-1994 |
采用頻率范圍為0.5MHz至15MHz的水聽器對超聲場的測量和特性記述 |
(Measurement and characterisation of ultrasonic fields using hydrophones in the frequency range 0,5 MHz to 15 MHz (IEC 61102:1991 + A1:1993); German version EN 61102:1993 + A1:1994) |
| DIN EN 61104-1993 |
激光視盤系統.12cm激光視盤-CD-V |
(Compact disc video system; 12 cm CD-V (IEC 61104:1992); German version EN 61104:1992) |
| DIN EN 61105-1994 |
錄像系統用標準空磁帶 |
(Reference tapes for video tape recorder systems (IEC 61105:1991); German version EN 61105:1993) |
| DIN EN 61106-1994 |
錄像盤.參數的測量方法 |
(Videodisks; methods of measurements for parameters (IEC 61106:1993); German version EN 61106:1993) |
| DIN EN 61108-1-1997 |
全球衛星導航系統(GNSS).第1部分:全球定位系統(GPS).接收設備.無線電功能要求.檢驗方法和要求的檢驗結果 |
(Global Navigation Satellite Systems (GNSS) - Part 1: Global Positioning System (GPS); receiver equipment; performance standards, methods of testing and required test results (IEC 61108-1:1996); German version EN 61108-1:1996) |
| DIN EN 61108-1-2004 |
海上導航和無線電通信設備和系統.全球?qū)Ш叫l(wèi)星系統(GNSS).第1部分:全球定位系統(GPS).接收機設備.性能標準、測試方法和要求的測試結果 |
|
| DIN EN 61108-2-1999 |
航海用導航和無線電通信設備及系統.全球?qū)Ш叫l(wèi)星系統(GNSS).第2部分:全球?qū)Ш叫l(wèi)星系統(GLONASS).接收設備. |
(Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 2: Global navigation satellite system (GLONASS); receiver equipment; performance standards, methods of testing and required test results |
| DIN EN 61108-4-2005 |
海上導航和無線電通信設備與系統.全球?qū)Ш叫l(wèi)星系統(GNSS).第4部分:船載DGPS和DGLONASS海上無線電信號接收設備.性能要求、試驗方法和要求的試驗結果 |
|
| DIN EN 61110-1993 |
船用奧米加和差奧米加接收系統.操作與性能要求.檢驗方法和要求的檢驗結果 |
(System Omega and differential Omega receivers for ships; operational and performance requirements; methods of testing and required test results (IEC 61110:1992); German version EN 61110:1992) |
| DIN EN 61114-1-1999 |
11/12GHz頻帶范圍內衛星廣播傳送用接收天線.第1部分:電測量 |
(Receiving antennas for satellite broadcast transmissions in the 11/12 GHz band - Part 1: Electrical measurements (IEC 61114-1:1999); German version EN 61114-1:1999) |
| DIN EN 61114-2-1996 |
在11/12GHz的頻帶上傳送衛星廣播用接收天線的測量方法.第2部分:個人用及共用接收天線的機械和環境試驗 |
(Methods of measurement on receiving antennas for satellite broadcast transmission in the 11/12 GHz band - Part 2: Mechanical and environmental tests on individual and collective receiving antennas (IEC 61114-2:1996); German version EN 61114-2:1996) |
| DIN EN 61115-1994 |
程序分析器的處理試樣系統性能的表達法 |
(Expression of performance of sample handling systems for process analyzers (IEC 61115:1992); German version EN 61115:1993) |
| DIN EN 61118-1994 |
使用M2型12.65mm(0.5in)磁帶的帶螺旋掃描錄像的盒式錄像帶 |
(Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape type M2 (IEC 61118:1993); German version EN 61118:1993) |
| DIN EN 61119-1-1994 |
數字錄音磁帶盒系統.第1部分:尺寸和特性 |
(Digital audio tape cassette system (DAT) - Part 1: Dimensions and characteristics (IEC 61119-1:1992); German version EN 61119-1:1994) |
| DIN EN 61119-2-1994 |
數字錄音磁帶盒系統.第2部分:DAT校準磁帶 |
(Digital audio tape cassette system (DAT) - Part 2: DAT-calibration tape (IEC 61119-2:1991); German version EN 61119-2:1994) |
| DIN EN 61119-3-1994 |
數字錄音磁帶盒系統.第3部分:DAT磁帶性能 |
(Digital audio tape cassette system (DAT) - Part 3: DAT tape properties (IEC 61119-3:1992); German version EN 61119-3:1994) |
| DIN EN 61119-5-1995 |
盒式數字錄音磁帶系統(DAT).第5部分:專業用盒式數字錄音磁帶(DAT)系統 |
(Digital audio tape cassette system (DAT) - Part 5: DAT for professional use (IEC 61119-5:1993); German version EN 61119-5:1995) |
| DIN EN 61119-6-1994 |
盒式數字錄音磁帶系統.第6部分:系列復制磁帶系統 |
(Digital audio tape cassette system (DAT) - Part 6: Serial copy management system (IEC 61119-6:1992); German version EN 61119-6:1994) |
| DIN EN 61120-1-1994 |
數字錄音機.演播室用6.3mm磁帶的磁帶盤.第1部分:一般要求 |
(Digital audio tape recorder reel to reel system, using 6,3 mm magnetic tape, for professional use; part 1: general requirements (IEC 61120-1:1991); German version EN 61120-1:1993) |
| DIN EN 61120-2-1994 |
數字錄音機.演播室用6.3mm磁帶的磁帶盤.第2部分:數據格式A |
(Digital audio tape recorder reel to reel system, using 6,3 mm magnetic tape, for professional use; part 2: format A (IEC 61120-2:1991); German version EN 61120-2:1993) |
| DIN EN 61120-3-1994 |
數字錄音機.演播室用6.3mm磁帶的磁帶盤.第3部分:數據格式B |
(Digital audio tape recorder reel to reel system, using 6,3 mm magnetic tape, for professional use; part 3: format B (IEC 61120-3:1991); German version EN 61120-3:1993) |
| DIN EN 61120-4-1993 |
數字型磁帶錄音機.演播室用6.3mm磁帶帶盤系統.第4部分:磁帶性能.定義和測量方法 |
(Digital audio tape recorder; reel-to-reel system using 6,3 mm magnetic tape for professional use; part 4: magnetic tape properties; definitions and methods of measurement (IEC 61120-4:1992); German version EN 61120-4:1992) |
| DIN EN 61120-5-1996 |
數字型磁帶錄音機.演播室用6.3mm磁帶帶卷系統.第5部分:磁帶卷 |
(Digital audio tape recorder reel-to-reel system, using 6,3 mm magnetic tape, for professional use - Part 5: Reels (IEC 61120-5:1995); German version EN 61120-5:1995) |
| DIN EN 61121 Berichtigung 2-2004 |
DINEN61121-2001的技術勘誤 |
(Corrigenda to DIN EN 61121:2001-04) |
| DIN EN 61121-2001 |
家用滾筒式干燥器.性能測量方法 |
(Tumbler dryers for household use - Methods for measuring the performance (IEC 61121:1997, modified); German version EN 61121:1999 + Corrigendum:1999 + A11:2000) |
| DIN EN 61121-2005 |
家用滾筒式干衣機.性能測試方法 |
|
| DIN EN 61122-1994 |
靜止視頻軟盤磁性錄制系統 |
(Still video floppy disk magnetic recording system (IEC 61122:1992); German version EN 61122:1993) |
| DIN EN 61125-1994 |
未用過的烴基絕緣液體.鑒定抗氧化穩定性的試驗方法 |
(Unused hydrocarbon-based insulating liquids - Test methods for evaluating the oxidation stability (IEC 71125:1992 + Corrigendum 1992); German version EN 61125:1993) |
| DIN EN 61129-1995 |
交流電流接地開關.感應電流開關 |
(Alternating current earthing switches - Induced current switching (IEC 61129:1992); German version EN 61129:1994) |
| DIN EN 61129/A1-1998 |
交流電接地開關.電流感應開關A1 |
(Alternating current earthing switches - Induced current switching; Amendment A1 (IEC 61129:1992/A1:1994); German version EN 61129:1994/A1:1995) |
| DIN EN 61131 Bb.1-1996 |
存儲程序控制器.用戶指南 |
(Programmable controllers - User guidelines (IEC 61131-4:1995)) |
| DIN EN 61131-1-1994 |
程序控制器.第1部分:一般介紹 |
(Programmable controllers - Part 1: General information (IEC 61131-1:1992); German version EN 61131-1:1994) |
| DIN EN 61131-1-2004 |
可編程控制器.第1部分:一般資料 |
|
| DIN EN 61131-2 Berichtigung 1-2004 |
對DIN EN 61131-2-2004的勘誤 |
|
| DIN EN 61131-2-2004 |
可編程控制器.第2部分:設備要求和試驗 |
(Programmable controllers - Part 2: Equipment requirements and tests (IEC 61131-2:2003); German version EN 61131-2:2003) |
| DIN EN 61131-2-2004 |
可編程控制器.第2部分:設備要求和試驗 |
|
| DIN EN 61131-3 Bb.1-1997 |
程序控制器.程序控制器上程序語言的應用和執行的指南 |
(Programmable controllers - Guidelines for the application and implementation of programming languages for progammable controllers) |
| DIN EN 61131-3-1994 |
程序控制器.第3部分:程序語言 |
(Programmable controllers - Part 3: Programming languages (IEC 61131-3:1993); German version EN 61131-3:1993) |
| DIN EN 61131-5-2001 |
程序控制器.第5部分:通信 |
(Programmable controllers - Part 5: Communications (IEC 61131-5:2000); German version EN 61131-5:2001) |
| DIN EN 61131-7-2001 |
程序控制器.第7部分:模糊控制程序 |
(Programmable controllers - Part 7: Fuzzy control programming (IEC 61131-7:2000); German version EN 61131-7:2000) |
| DIN EN 61135-1994 |
臺卡導航系統:船用接收機;最低性能標準;試驗方法和要求試驗結果 |
(Decca Navigator system: Receivers for ships - Minimum performance standards, methods of testing and required test results (IEC 61135:1992); German version EN 61135:1994) |
| DIN EN 61136-1-1995 |
半導體整流器.可調節電驅動系統.一般要求.第1部分:直流電機驅動的額定值,特性 |
(Semiconductor power convectors - Adjustable speed electric drive systems; general requirements - Part 1: Rating specifications, particularly for d.c. motor drives (IEC 61136-1:1995, modified); German version EN 61136-1:1995) |
| DIN EN 61138-2004 |
便攜式接地和短路設備用電纜 |
(Cables for portable earthing and short-circuiting equipment (IEC 61138:1994 + A1:1995); German version EN 61138:1997 + A11:2003) |
| DIN EN 61138-2004 |
便攜式接地和短路設備用電纜 |
|
| DIN EN 61140-2003 |
電擊防護.裝置和設備的通用概念 |
(Protection against electric shock - Common aspects for installation and equipment (IEC 61140:2001); German version EN 61140:2002) |
| DIN EN 61143-1-1995 |
電工測量儀器.X-t型記錄儀.第1部分:定義和要求 |
(Electrical measuring instruments - X-t recorders - Part 1: Definitions and requirements (IEC 61143-1:1992); German version EN 61143-1:1994) |
| DIN EN 61143-1/A1-1998 |
電工測量儀器.X-t型記錄儀.第1部分:定義和要求 |
(Electrical measuring instruments - X-t recorders - Part 1: Definitions and requirements; Amendment A1 (IEC 61143-1:1992/A1:1997); German version EN 61143-1:1994/A1:1997) |
| DIN EN 61143-2-1995 |
電工測量儀器.X-t型記錄儀.第2部分:推薦附加試驗方法 |
(Electrical measuring instruments - X-t recorders - Part 2: Recommended additional test methods (IEC 61143-2:1992); German version EN 61143-2:1994) |
| DIN EN 61144-1994 |
絕緣油氧指數測定的試驗方法 |
(Test method for the determination of oxygen index of insulating liquids (IEC 61144:1992); German version EN 61144:1993) |
| DIN EN 61146-1-1997 |
攝象機(PAL/SECAN/NTSC).測量方法.第1部分:非廣播單測頭攝象機 |
(Methods of measurement for video cameras (PAL/SECAM/NTSC) - Part 1: Non-broadcast single-sensor cameras (IEC 61146-1:1994); German version EN 61146-1:1996) |
| DIN EN 61146-2-1998 |
攝像機(PAL/SECAN/NTSC).測量方法.第2部份:專業用帶兩個傳感器和三個傳感器的攝像機 |
(Video cameras (PAL/SECAM/NTSC) - Methods of measurement - Part 2: Two- and three-sensor professional cameras (IEC 61146-2:1997); German version EN 61146-2:1997) |
| DIN EN 61146-3-1998 |
攝像機(PAL/SECAN/NTSC).測量方法.第3部分:非廣播用攝象機記錄器 |
(Video cameras (PAL/SECAM/NTSC) - Methods of measurement - Part 3: Non-broadcast camera-recorders (IEC 61146-3:1997); German version EN 61146-3:1997) |
| DIN EN 61150-1995 |
堿性二次電池和電池組.采用微形電池設計的可充電的整體密封式鎳鎘蓄電池組 |
(Alkaline secondary cells and batteries - Sealed nickel-cadmium rechargeable monobloc batteries in button cell design (IEC 61150:1992 + Corrigendum 1992); German version EN 61150:1993) |
| DIN EN 61152-1994 |
金屬護皮溫度件的尺寸 |
(Dimensions of metal-sheathed thermometers elements (IEC 61152:1992, modified); German version EN 61152:1994) |
| DIN EN 61157-1995 |
醫療診斷超聲波設備的聲輸出申報的要求 |
(Requirements for the declaration of the acoustic output of medical diagnostic ultrasonic equipment (IEC 61157:1992); German version EN 61157:1994) |
| DIN EN 61158-2-1994 |
工業控制系統用范圍總線標準.弟2部分:物理層分類和操作 |
(Fieldbus standard for use in industrial control systems - Part 2: Physical layer specification and service definition (IEC 61158-2:1993); German version EN 61158-2:1994) |
| DIN EN 61158-2/A1-1996 |
工業控制系統用范圍總線標準.弟2部分:物理層的規范和服務定義 |
(Fieldbus standard for use in industrial control systems - Part 2: Physical layer specification and service definition (IEC 61158-2:1993/A1:1995); German version EN 61158-2/A1:1996) |
| DIN EN 61158-2/A2-1997 |
工業控制系統用范圍總線標準.弟2部分:物理層規范和服務定義. |
(Fieldbus standard for use in industrial control systems - Part 2: Physical layer specification and service definition (IEC 61158-2:1993/A2:1996); German version EN 61158-2:1994/A2:1996) |
| DIN EN 61158-3-2005 |
測量和控制用數字數據通信.工業控制系統用現場總線.第3部分:數據鏈路服務定義(IEC 61158-3-2003) |
|
| DIN EN 61158-4-2005 |
測量和控制用數字數據通信.工業控制系統用現場總線.第4部分:數據鏈路協議規范 |
|
| DIN EN 61158-5-2005 |
測量和控制用數字數據通信.工業控制系統用現場總線.第5部分:應用層服務定義 |
|
| DIN EN 61158-6-2005 |
測量和控制用數字數據通信.工業控制系統用通信總線.第6部分:應用層協議規范 |
|
| DIN EN 61161-1999 |
0.5MHz至25MHz范圍內的液體中超聲功率的測量 |
(Ultrasonic power measurement in liquids in the frequency range 0,5 MHz to 25 MHz (IEC 61161:1992 + A1:1998); German version EN 61161:1994 + A1:1998) |
| DIN EN 61162-1-2001 |
航海和無線電通信設備及系統.數字接口.第1部分:單一擴音器和復合聽聲器 |
(Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1: Single talker and multiple listeners (IEC 61162-1:2000); German version EN 61162-1:2000) |
| DIN EN 61162-2-1999 |
航海導航和無線電通信設備及系統.數字接口.第1部分:高速傳輸單路擴音器和多路聽聲器 |
(Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 2: Single talker and multiple listeners, high-speed transmission (IEC 61162-2:1998); German version EN 61162-2:1998) |
| DIN EN 61162-400-2002 |
航海和無線電通信設備及系統.數字接口.第400部分:內連接輸入的船用系統單通話器和多受話器的基本原理 |
(Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 400: Multiple talkers and multiple listeners; Ship systems interconnection; Introduction and general principles (IEC 61162-400:2001); German version EN 61162-400 |
| DIN EN 61162-401-2002 |
海上導航和無線電通信設備及系統.數字接口.第401部分:多通話器和多受話器.船舶系統互連.應用輪廓 |
(Maritime navigation and radiocommunication equipment and systems Digital interfaces - Part 401: Multiple talkers and multiple listeners; Ship systems interconnection; Application profile (IEC 61162-401:2001); German version EN 61162-401:2002, text in Eng |
| DIN EN 61162-410-2002 |
海上導航和無線電通信設備及系統.數字接口.第410部分:多通話器和多受話器.船舶系統互連.傳輸輪廓要求和基本 |
(Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 410: Multiple talkers and multiple listeners; Ship systems interconnection; Transport profile requirements and basic transport profile (IEC 61162-410:2001); Germ |
| DIN EN 61162-420-2002 |
航海和無線電通信設備及系統.數字接口.第400部分:內連接輸入的船用系統單通話器和多受話器的基本原理.船艙 |
(Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 420: Multiple talkers and multiple listeners; Ship systems interconnection; Companion standard requirements and basic companion standards (IEC 61162-420:2001); G |
| DIN EN 61164-2004 |
可靠性增長.統計試驗和評估方法 |
|
| DIN EN 61166-1994 |
高壓交流電路斷路器.高壓交流電路斷路器的抗地震質量導則 |
(High-voltage alternating current circuit-breakers - Guide for seismic qualification of high-voltage alternating current circuit-breakers (IEC 61166:1993); German version EN 61166:1993) |
| DIN EN 61167-1995 |
金屬鹵素燈 |
(Metal halide lamps (IEC 61167:1992 + AMD 1:1995); German version EN 61167:1994 + A1:1995) |
| DIN EN 61167/A2-1997 |
金屬鹵素燈.修改件2 |
(Metal halide lamps; Amendment A2 (IEC 61167:1992/A2:1997); German version EN 61167:1994/A2:1997) |
| DIN EN 61167/A3-1999 |
金屬鹵素燈.修正A3 |
(Metal halide lamps; Amendment A3 (IEC 61167:1992/A3:1998); German version EN 61167:1994/A3:1998) |
| DIN EN 61168-2000 |
放射治療模擬器.功能特性 |
(Radiotherapy simulators - Functional performance characteristics (IEC 61168:1993); German version EN 61168:1994) |
| DIN EN 61169-1-1-1998 |
射頻連接器.第1-1部分:單一多系列雙語空白詳細規范 |
(Radio-frequency connectors - Part 1-1: Single, multi-series, dual-language blank detail specification (IEC 61169-1-1:1996); German version EN 61169-1-1:1997) |
| DIN EN 61169-1-1995 |
高頻連接件.第1部分:總規范.一般要求和測量方法 |
(Radio-frequency connectors - Part 1: Generic specification; general requirements and measuring methods (IEC 61169-1:1992); German version EN 61169-1:1994) |
| DIN EN 61169-1/A1-1997 |
射頻連接器.第1部分:總規范.一般要求和測量方法 |
(Radio-frequency connectors - Part 1: Generic specification; general requirements and measuring methods (IEC 61169-1:1992/A1:1996); German version EN 61169-1:1994/A1:1996) |
| DIN EN 61169-1/A2-1998 |
高頻連接件.第1部分:總規范.一般要求和測量方法 |
(Radio-frequency connectors - Part 1: Generic specification; general requirements and measuring methods (IEC 61169-1:1992/A2:1997); German version EN 61169-1:1994/A2:1997) |
| DIN EN 61169-31-2000 |
射頻連接器.第31部分:帶螺紋耦合的外導體1,0mm(0,039in)的內徑RF共軸連接器.特性阻抗50歐姆(1,0型) |
(Radio-frequency connectors - Part 31: RF coaxial connectors with inner diameter of outer conductor 1,0 mm (0,039 in) with screw coupling; characteristic impedance 50 ohms (type 1,0) (IEC 61169-31:1999); German version EN 61169-31:1999) |
| DIN EN 61169-32-2000 |
射頻連接器.第32部分:帶螺紋耦合的外導體1,85mm(0,072in)的內徑RF共軸連接器.特性阻抗50歐姆(1,85型) |
(Radio-frequency connectors - Part 32: RF coaxial connectors with inner diameter of outer conductor 1,85 mm (0,072 in) with srew coupling; characteristic impedance 50 ohms (type 1,85) (IEC 61169-32:1999); German version EN 61169-32:1999) |
| DIN EN 61169-33-1998 |
射頻連接器.第33部分:BMA結構系列的高頻插接器用分規范 |
(Radio-frequency connectors - Part 33: Sectional specification for series BMA r.f. connectors (IEC 61169-33:1996); German version EN 61169-33:1997) |
| DIN EN 61169-36-1998 |
射頻連接器.第36部分:帶孔徑搭鎖連接器的微型連接器的微型化高頻同軸插接器用分規范.50歐姆波阻抗(MCX型) |
(Radio-frequency connectors - Part 36: Sectional specification for microminiature r.f. coaxial connectors with snap-on coupling - Characteristic impedance 50 Ohm (type MCX) (IEC 61169-36:1996); German version EN 61169-36:1997) |
| DIN EN 61173-1996 |
光電功率發生系統過壓保護.導則 |
(Overvoltage protection for photovoltaic (PV) power generating systems - Guide (IEC 61173:1992); German version EN 61173:1994) |
| DIN EN 61174-2002 |
航海導航和無線電通信裝置與系統 |
(Maritime navigation and radiocommunication equipment and systems - Electronic chart display and information system (ECDIS) - Operational and performance requirements, methods of testing and required test results (IEC 61174:2001); German version EN 61174: |
| DIN EN 61175-1995 |
信號和連接的術語名稱 |
(Designations for signals and connections (IEC 61175:1993); German version EN 61175:1993) |
| DIN EN 61176-1995 |
手握式電源電壓操作的圓鋸性能測量方法 |
(Hand-held electric mains voltage operated circular saws - Methods for measuring the performance (IEC 61176:1993); German version EN 61176:1993) |
| DIN EN 61179-1994 |
D2(NTSC,PAL,PAL-M)格式19mm磁帶螺旋掃描數字復合盒式錄像系統 |
(Helical-scan digital composite video cassette recording system using 19 mm magnetic tape, format D2 (NTSC, PAL, PAL-M) (IEC 61179:1993); German version EN 61179:1993) |
| DIN EN 61180-1-1995 |
低壓設備的高壓試驗技術.第1部分:定義,試驗和方法要求 |
(High-voltage test techniques for low-voltage equipment - Part 1: Definitions, test and procedure requirements (IEC 61180-1:1992); German version EN 61180-1:1994) |
| DIN EN 61180-2-1995 |
低壓設備的高壓試驗技術.第2部分:試驗設備 |
(High-voltage test techniques for low-voltage equipment - Part 2: Test equipment (IEC 61180-2:1994); German version EN 61180-2:1994) |
| DIN EN 61181-1994 |
浸漬絕緣材料.工廠試驗用電子設備溶解氣體分析的應用 |
(Impregnated insulating materials - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment (IEC 61181:1993); German version EN 61181:1993) |
| DIN EN 61183-1994 |
電聲學.聲級計的無規入射聲場及擴散聲場的校正 |
(Electroacoustics - Random-incidence and diffuse-field calibration of sound level meters (IEC 61183:1994); German version EN 61183:1994) |
| DIN EN 61184-1998 |
卡口燈座 |
(Bayonet lampholders (IEC 61184:1997); German version EN 61184:1997) |
| DIN EN 61184-2005 |
卡口燈座 |
|
| DIN EN 61184/A1-2001 |
卡口燈座.修改件1 |
(Bayonet lampholders (IEC 61184:1997/A1:2000); Amendment A1; German version EN 61184:1997/A1:2001) |
| DIN EN 61185-1998 |
電源設備用的磁氧化鐵芯(ETD).尺寸 |
(Magnetic oxide cores (ETD-cores) intended for use in power supply applications - dimensions (IEC 61185:1992 + A1:1995); German version EN 61185:1997) |
| DIN EN 61187-1995 |
電氣和電子測量儀.隨機提供的文件 |
(Electrical and electronic measuring equipment - Documentation (IEC 61187:1993, modified); German version EN 61187:1994) |
| DIN EN 61188-1-1-1998 |
印制電路板和印制電路板組件.設計和使用.第1部分:總要求.第1節:電子組件的平整度可見點 |
(Printed boards and printed board assemblies - Design and use - Part 1-1: Generic requirements; flatness considerations for electronic assemblies (IEC 61188-1-1:1997); German version EN 61188-1-1:1997) |
| DIN EN 61188-1-2-1999 |
印制電路板和印制電路板組件.設計和使用.第1-2部分:總要求.確定的阻抗 |
(Printed boards and printed board assemblies - Design and use - Part 1-2: Generic requirements; controlled impedance (IEC 61188-1-2:1998); German version EN 61188-1-2:1998) |
| DIN EN 61188-5-1-2003 |
印制電路板和印制電路板組件.設計和使用.第5-1部分:焊接(焊接區/接縫)考慮.總要求 |
(Printed boards and printed board assemblies - Design and use - Part 5-1: Attachment (land/joint) considerations - Generic requirements (IEC 61188-5-1:2002); German version EN 61188-5-1:2002) |
| DIN EN 61188-5-2-2004 |
印制電路板和印制電路板組件.設計和使用.第5-2部分:焊接(焊接區/接縫)條件.分立件 |
|
| DIN EN 61188-5-6-2003 |
印制板和印制板組件.設計和使用.第5-6部分:附件的要求.四面帶有J形引線的片狀載體 |
(Printed boards and printed board assemblies - Design and use - Part 5-6: Attachment (land/joint) considerations; Chip carriers with J-leads on four sides (IEC 61188-5-6:2003); German version EN 61188-5-6:2003) |
| DIN EN 61189-1-2002 |
電氣材料、印制板和其他互連結構和組裝件的試驗方法.第1部分:一般試驗方法和方法論 |
(Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 1: General test methods and methodology (IEC 61189-1:1997 + A1:2001); German version EN 61189-1:1997 + A1:2001) |
| DIN EN 61189-2-2001 |
電氣材料、印制電路板和其它互連結構和組件的試驗方法.第2部分:互連結構用材料的試驗方法 |
(Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures (includes Amendment A1:2000) (IEC 61189-2:1997 + A1:2000); German version EN 611 |
| DIN EN 61189-3-2000 |
電氣材料、互連結構和組件的試驗方法.第3部分:互連結構的試驗方法(印制電路板) |
(Test methods for electrical materials, interconnection structures and assemblies - Part 3: Test methods for interconnection structures (printed boards) (IEC 61189-3:1997 + A1:1999); German version EN 61189-3:1997 + A1:1999) |
| DIN EN 61190-1-1-2003 |
電子組件用連接材料.第1-1部分:電子組件中高質量互連用助焊劑的要求 |
(Attachment materials for electronic assembly - Part 1-1: Requirements for soldering fluxes for high-quality interconnections in electronics assembly (IEC 61190-1-1:2002); German version EN 61190-1-1:2002) |
| DIN EN 61190-1-2-2003 |
電子組件用連接材料.第1-2部分:電子組件中高質量互連用焊錫的要求 |
(Attachment materials for electronic assembly - Part 1-2: Requirements for solder pastes for high-quality interconnections in electronic assembly (IEC 61190-1-2:2002); German version EN 61190-1-2:2002) |
| DIN EN 61190-1-3-2003 |
電子組件用連接材料.第1-3部分:電子焊接用電子級釬焊合金及有焊劑和無焊劑的固體焊料的要求 |
(Attachment materials for electronic assembly - Part 1-3: Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solders for electronic soldering applications (IEC 61190-1-3:2002); German version EN 61190-1-3:2002) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com