標準號 |
中文名稱 |
英文名稱 |
| EN 10216-3-2004 |
壓力載荷用無縫鋼管.交貨技術條件.第3部分:合金細粒鋼管 |
|
| EN 10216-4-2002 |
壓力用途的無縫鋼管交貨技術條件第4部分：有規定低溫特性的非合金及合金鋼管 |
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties / Note: To be amended by EN 10216-4/prA1 (2003-07). |
| EN 10216-4-2004 |
壓力載荷用無縫鋼管.交貨技術條件.第4部分:帶特定低溫性能的非合金和合金鋼管 |
|
| EN 10216-5-2004 |
壓力用途無縫鋼管.交貨技術條件.第5部分:不銹鋼管 |
|
| EN 10217-1-2002 |
壓力用途的焊接鋼管交貨技術條件第1部分：有規定室溫特性的非合金鋼管 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
| EN 10217-2-2002 |
壓力用途的焊接鋼管交貨技術條件第2部分：有規定高溫特性的電焊非合金及合金鋼管 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties |
| EN 10217-3-2002 |
壓力用途的焊接鋼管交貨技術條件第3部分：合金細晶粒鋼管 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
| EN 10217-4-2002 |
壓力用途的焊接鋼管交貨技術條件第4部分：有規定低溫特性的電焊非合金鋼管 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties |
| EN 10217-5-2002 |
壓力用途的焊接鋼管交貨技術條件第5部分：有規定高溫特性的埋弧焊非合金及合金鋼管 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties |
| EN 10217-6-2002 |
壓力用途的焊接鋼管交貨技術條件第6部分：有規定低溫特性的埋弧焊非合金鋼管 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties |
| EN 10218-1-1994 |
鋼絲和線材制品總則第1部分：試驗方法 |
Steel wire and wire products-General-Part 1: Test methods |
| EN 10218-2-1996 |
鋼絲和線材制品總則第2部分：鋼絲尺寸和公差 |
Steel wire and wire products - General - Part 2: Wire dimensions and tolerances |
| EN 10219-1-1997 |
冷成型細晶粒鋼和非合金鋼的焊接結構空心型材第1部分：交貨技術要求 |
Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery requirements |
| EN 10219-2-1997 |
冷成型細晶粒鋼和非合金鋼的焊接結構空心型材第2部分：公差、尺寸和截面特性 |
Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties |
| EN 1022-1996 |
居室家具 坐椅 穩定性的測試 |
Domestic furniture - Seating - Determination of stability |
| EN 10220-2002 |
無縫和焊接鋼管單位長度的尺寸和質量 |
Seamless and welded steel tubes - Dimensions and masses per unit length |
| EN 10221-1995 |
熱軋棒材的表面質量分類交貨技術條件 |
Surface quality classes for hot-rolled bars and rods - Technical delivery conditions |
| EN 10222-3-1998 |
壓力用途的鋼鍛件第3部分：有規定低溫特性的鎳鋼 |
Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties |
| EN 10223-1-1997 |
柵欄用鋼絲和鋼絲制品第1部分：鍍鋅和鍍鋅合金的有刺鋼絲 |
Steel wire and wire products for fences - Part 1: Zinc and zinc-alloy coated steel barbed wire |
| EN 10223-2-1997 |
柵欄用鋼絲和鋼絲制品第2部分：農業、隔離和柵欄用六角型鋼絲網 |
Steel wire and wire products for fences - Part 2: Hexagonal steel wire netting for agricultural, insulation, and fencing purposes |
| EN 10223-2-2004 |
柵欄用鋼絲和鋼絲制品.第2部分:農用隔離和柵欄用六角形鋼絲網 |
|
| EN 10223-3-1997 |
柵欄用鋼絲和鋼絲制品工程用六角型鋼絲網 |
Steel wire and wire products for fences - Part 3: Hexagonal steel wire netting for engineering purposes |
| EN 10223-4-1998 |
柵欄用鋼絲和鋼絲制品鋼絲焊接網式柵欄 |
Steel wire and wire products for fences - Part 4: Steel wire welded mesh fencing |
| EN 10223-5-1998 |
柵欄用鋼絲和鋼絲制品鋼絲編織絞接和打結網式柵欄 |
Steel wire and wire products for fences - Part 5: Steel wire woven hinged joint and knotted mesh fencing |
| EN 10223-6-1998 |
柵欄用鋼絲和鋼絲制品鋼絲網柵欄的測定 |
Steel wire and wire products for fences - Part 6: Steel wire chain link fencing |
| EN 10223-7-2002 |
柵欄用鋼絲和鋼絲制品第7部分：柵欄用鋼絲焊接板 |
Steel wire and wire products for fences - Part 7: Steel wire welded panels for fencing |
| EN 10224-2002 |
輸送液體（包括人類生活用水）用的非合金鋼管和管件交貨技術條件 |
Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions |
| EN 10225-2001 |
固定海上結構用的可焊接結構鋼交貨技術條件 |
Weldable structural steels for fixed offshore structures - Technical delivery conditions |
| EN 10226-1-2004 |
有壓力緊固連接件的管道螺紋.第1部分:錐形外螺紋和平行內螺紋.尺寸、公差和名稱與符號 |
|
| EN 10228-1-1999 |
鋼鍛件的無損檢測第1部分：磁粉檢查 |
Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection |
| EN 10228-2-1998 |
鋼鍛件的無損檢測第2部分：滲透檢驗 |
Non-destructive testing of steel forgings - Part 2: Penetrant testing |
| EN 10228-3-1998 |
鋼鍛件的無損檢測第3部分：鐵素體或馬氏體鋼鍛件的超聲檢驗 |
Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings |
| EN 10228-4-1999 |
鋼鍛件的無損檢測第4部分：奧氏體和奧氏體-鐵素體不銹鋼鍛件的超聲檢驗 |
Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings |
| EN 10229-1998 |
鋼產品耐氫致破裂(HIC)的評估 |
Evaluation of resistance of steel products to hydrogen induced cracking (HIC) |
| EN 1023-1-1996 |
辦公家具 屏風 第1部分：尺寸 |
Office furniture - Screens - Part 1: Dimensions |
| EN 1023-2-2000 |
辦公家具 屏風 第2部分：機械安全要求 |
Office furniture - Screens - Part 2: Mechanical safety requirements |
| EN 1023-3-2000 |
辦公家具 屏風 第3部分：試驗方法 |
Office furniture - Screens - Part 3: Test methods |
| EN 10230-1-1999 |
鋼絲釘?shù)?部分：一般應用的松動釘 |
Steel wire nails - Part 1: Loose nails for general applications |
| EN 10232-1993 |
金屬材料整截面管材彎曲試驗 |
Metallic materials; tube (in full section); bend test |
| EN 10233-1993 |
金屬材料管材壓扁試驗 |
Metallic materials; tube; flattening test |
| EN 10234-1993 |
金屬材料管材管流延伸試驗 |
Metallic materials; tube; drift expanding test |
| EN 10235-1993 |
金屬材料管材法蘭試驗 |
Metallic materials; tube; flanging test |
| EN 10236-1993 |
金屬材料管材環形擴管試驗 |
Metallic materials; tube; ring expanding test |
| EN 10237-1993 |
金屬材料管材環形管拉伸試驗 |
Metallic materials; tube; ring tensile test |
| EN 10238-1996 |
自動噴砂清理和自動涂底漆結構鋼制品 |
Automatically blast-cleaned and automatically prefabrication primed structural steel products |
| EN 1024-1997 |
間斷敷設用粘土制屋面瓦 幾何性能測定 |
Clay roofing tiles for discontinuous laying - Determination of geometric characteristics |
| EN 10240-1997 |
鋼管內或外保護覆層用于自動車間的熱浸電動覆膜規范 |
Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants |
| EN 10241-2000 |
鋼制螺紋管配件 |
Steel threaded pipe fittings |
| EN 10243-1-1999 |
鋼模鍛件尺寸公差第1部分：落錘或立式壓力鍛件 |
Steel die forgings - Tolerances on dimensions - Part 1: Drop and vertical press forgings |
| EN 10243-2-1999 |
鋼模鍛件尺寸公差第2部分：臥式鍛壓機制的鐓鍛件 |
Steel die forgings - Tolerances on dimensions - Part 2: Upset forging made on horizontal forging machines |
| EN 10244-1-2001 |
鋼絲和鋼絲制品鋼絲上的非黑色金屬外層第1部分：一般原則 |
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 1: General principles |
| EN 10244-2-2001 |
鋼絲和鋼絲制品鋼絲上的非黑色金屬外層第2部分：鋅或鋅合金鍍層 |
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc alloy coatings |
| EN 10244-3-2001 |
鋼絲和鋼絲制品鋼絲上的非黑色金屬外層第3部分：鋁鍍層 |
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 3: Aluminium coatings |
| EN 10244-4-2001 |
鋼絲和鋼絲制品鋼絲上的非黑色金屬外層第4部分：錫鍍層 |
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 4: Tin coatings |
| EN 10244-5-2001 |
鋼絲和鋼絲制品鋼絲上的非黑色金屬外層第5部分：鎳鍍層 |
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 5: Nickel coatings |
| EN 10244-6-2001 |
鋼絲和鋼絲制品鋼絲上的非黑色金屬外層第6部分：銅、青銅或黃銅鍍層 |
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 6: Copper, bronze or brass coatings |
| EN 10245-1-2001 |
鋼絲和鋼絲制品鋼絲上的有機涂層第1部分：一般原則 |
Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules |
| EN 10245-2-2001 |
鋼絲和鋼絲制品鋼絲上的有機涂層第2部分：涂PVC線材 |
Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire |
| EN 10245-3-2001 |
鋼絲和鋼絲制品鋼絲上的有機涂層第3部分：涂PE線材 |
Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire |
| EN 10245-4-2003 |
鋼絲和鋼絲制品鋼絲上的有機涂層第4部分：涂聚脂線材 |
Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire |
| EN 10246-1-1996 |
鋼管的無損檢測第1部分：證明液壓密封性用無縫和焊接鐵磁鋼管(埋弧焊除外)的自動電磁檢驗 |
Non destructive testing of steel tubes - Part 1: Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness |
| EN 10246-10-2000 |
鋼管的無損檢測第10部分：鋼管缺陷探測用的自動熔弧焊鋼管焊縫的射線檢驗 |
Non-destructive testing of steel tubes - Part 10: Radiographic testing of the weld seam of automatic fusion arc welded steel tubes for the detection of imperfections |
| EN 10246-11-2000 |
鋼管的無損檢測第11部分：表面缺陷探測用的無縫和焊接鋼管的液體滲透檢驗 |
Non-destructive testing of steel tubes - Part 11: Liquid penetrant testing of seamless and welded steel tubes for the detection of surface imperfections |
| EN 10246-12-2000 |
鋼管的無損檢測第12部分：表面缺陷探測用的無縫和焊接鐵磁鋼管的磁粉檢驗 |
Non-destructive testing of steel tubes - Part 12: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections |
| EN 10246-13-2000 |
鋼管的無損檢測第13部分：無縫和焊接鋼管（埋弧焊除外）自動全周界厚度的超聲檢驗 |
Non-destructive testing of steel tubes - Part 13: Automatic full peripheral ultrasonic thickness testing for seamless and welded (except submerged arc welded) steel tubes |
| EN 10246-14-1999 |
鋼管的無損檢測第14部分：層狀缺陷探測用的無縫和焊接鋼管(埋弧焊接除外)的自動超聲檢驗 |
Non-destructive testing of steel tubes - Part 14: Automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of laminar imperfections |
| EN 10246-15-2000 |
鋼管的無損檢測第15部分：層狀缺陷探測用的制造焊接鋼管用鋼帶/鋼板的自動超聲檢驗 |
Non-destructive testing of steel tubes - Part 15: Automatic ultrasonic testing of strip/plate used in the manufacture of welded steel tubes for the detection of laminar imperfections |
| EN 10246-16-2000 |
鋼管的無損檢測第16部分：層狀缺陷探測用的焊接鋼管焊縫附近區域的自動超聲檢驗 |
Non-destructive testing of steel tubes - Part 16: Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections |
| EN 10246-17-2000 |
鋼管的無損檢測第17部分：層狀缺陷探測用的無縫和焊接鋼管端部的自動超聲檢驗 |
Non-destructive testing of steel tubes - Part 17: Ultrasonic testing of tube ends of seamless and welded steel tubes for the detection of laminar imperfections |
| EN 10246-18-2000 |
鋼管的無損檢測第18部分：層狀缺陷探測用的無縫和焊接鐵磁鋼管端部的磁粉檢驗 |
Non-destructive testing of steel tubes - Part 18: Magnetic particle inspection of the tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections |
| EN 10246-2-2000 |
鋼管的無損檢測第2部分：證明液壓密封性用無縫和焊接奧氏體和奧氏體鐵素體鋼管（埋弧焊除外） 的自動渦流 |
Non-destructive testing of steel tubes - Part 2: Automatic eddy current testing of seamless and welded (except submerged arc-welded) austenitic and austenitic-ferritic steel tubes for verification of hydraulic leak-tightness |
| EN 10246-3-1999 |
鋼管的無損檢測第3部分：缺陷探測用無縫和焊接鋼管(埋弧焊除外)的自動渦流檢驗 |
Non-destructive testing of steel tubes - Part 3: Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections |
| EN 10246-4-1999 |
鋼管的無損檢測第4部分：橫向缺陷探測用無縫或焊接鐵磁鋼管的（埋弧焊除外）自動全周界磁傳感器檢驗漏磁 |
Non-destructive testing of steel tubes - Part 4: Automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections |
| EN 10246-5-1999 |
鋼管的無損檢測第5部分：徑向缺陷探測用無縫或焊接鐵磁鋼管的（埋弧焊除外）自動全周界磁傳感器檢驗漏磁 |
Non-destructive testing of steel tubes - Part 5: Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for the detection of longitudinal imperfections |
| EN 10246-6-1999 |
鋼管的無損檢測第6部分：橫向缺陷探測用無縫鋼管的自動全周界超聲檢驗 |
Non-destructive testing of steel tubes - Part 6: Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections |
| EN 10246-7-1996 |
鋼管的無損檢測第7部分：縱向缺陷探測用的無縫和焊接鐵磁鋼管(埋弧焊除外)的自動周界超聲檢驗 |
Non destructive testing of steel tubes - Part 7: Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) steel tubes for the detection of longitudinal imperfections |
| EN 10246-8-1999 |
鋼管的無損檢測第8部分：縱向缺陷探測用電焊鋼管焊縫的自動超聲檢驗 |
Non-destructive testing of steel tubes - Part 8: Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections |
| EN 10246-9-2000 |
鋼管的無損檢測第9部分：探測用縱向和/或橫向缺陷埋弧焊鋼管焊縫的自動超聲檢驗 |
Non-destructive testing of steel tubes - Part 9: Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections |
| EN 10248-1-1995 |
非合金鋼制熱軋板堆第1部分：交貨技術條件 |
Hot rolled sheet piling of non alloy steels - Part 1: Technical delivery conditions |
| EN 10248-2-1995 |
非合金鋼制熱軋板堆第2部分：尺寸和形狀公差 |
Hot rolled sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions |
| EN 10249-1-1995 |
非合金鋼制冷成型板堆第1部分：交貨技術條件 |
Cold formed sheet piling of non alloy steels - Part 1: Technical delivery conditions |
| EN 10249-2-1995 |
非合金鋼制冷成型板堆第2部分：尺寸和形狀公差 |
Cold formed sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions |
| EN 10250-1-1999 |
一般工程用途的敞口鋼模鍛件第1部分：一般要求 |
Open die steel forgings for general engineering purposes - Part 1: General requirements |
| EN 10250-2-1999 |
一般工程用途的敞口鋼模鍛件第2部分：非合金鋼和特殊鋼 |
Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels |
| EN 10250-3-1999 |
一般工程用途的敞口鋼模鍛件第3部分：合金特殊鋼 |
Open die steel forgings for general engineering purposes - Part 3: Alloy special steels |
| EN 10250-4-1999 |
一般工程用途的敞口鋼模鍛件第4部分：不銹鋼 |
Open die steel forgings for general engineering purposes - Part 4: Stainless steels |
| EN 10251-1997 |
磁性材料測定電工鋼片和電工鋼帶幾何特性值的方法 |
Magnetic materials - Methods of determination of the geometrical characteristics of electrical steel sheet and strip |
| EN 10252-1997 |
磁性材料測量磁鋼薄板和帶材中頻磁性能的方法 |
Magnetic materials - Methods of measurement of magnetic properties of magnetic steel sheet and strip at medium frequencies |
| EN 10253-1-1999 |
對縫焊管配件第1部分：一般用途和無特殊檢驗要求的鍛制碳鋼 |
Butt-welding pipe fittings - Part 1: Wrought carbon steel for general use and without specific inspection requirements |
| EN 10254-1999 |
鋼封閉模鍛件交貨一般技術條件 |
Steel closed die forgings - General technical delivery conditions |
| EN 10255-2004 |
焊接和螺紋用非合金鋼管.交貨技術條件 |
|
| EN 10256-2000 |
鋼管的無損檢測1級和2級無損檢測人員的資格和能力 |
Non-destructive testing of steel tubes - Qualification and competence of level 1 and 2 non-destructive testing personnel |
| EN 10257-1-1998 |
動力電纜或通信電纜鎧甲用鍍鋅或鋅合金的非合金鋼電線第1部分：地面電纜 |
Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 1: Land cables |
| EN 10257-2-1998 |
動力電纜或通信電纜鎧甲用鍍鋅或鋅合金的非合金鋼電線第2部分：海底電纜 |
Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 2: Submarine cables |
| EN 10258-1997 |
冷軋不銹鋼窄帶材和切割長度尺寸和形狀公差 |
Cold-rolled stainless steel narrow strip and cut lengths - Tolerances on dimensions and shape |
| EN 10259-1997 |
冷軋不銹鋼寬帶材和金屬板/薄板尺寸和形狀公差 |
Cold-rolled stainless steel wide strip and plate/sheet - Tolerances on dimensions and shape |
| EN 1026-2000 |
門窗 空氣滲透性 試驗方法 |
Windows and doors - Air permeability - Test method |
| EN 10263-2-2001 |
冷加工和冷擠壓的鋼棒、棒材和線材第2部分：冷加工后不用熱處理鋼交貨的一般技術條件 |
Steel rod, bars and wire for cold heading and cold extrusion - Part 2: Technical delivery conditions for steels not intended for heat treatment after cold working |
| EN 10263-3-2001 |
冷加工和冷擠壓的鋼棒、棒材和線材第3部分：表面硬化鋼交貨的一般技術條件 |
Steel rod, bars and wire for cold heading and cold extrusion - Part 3: Technical delivery conditions for case hardening steels |
| EN 10263-4-2001 |
冷加工和冷擠壓的鋼棒、棒材和線材第4部分：淬火和回火鋼交貨的一般技術條件 |
Steel rod, bars and wire for cold heading and cold extrusion - Part 4: Technical delivery conditions for steels for quenching and tempering |
| EN 10263-5-2001 |
冷加工和冷擠壓的鋼棒、棒材和線材第5部分：不銹鋼交貨的一般技術條件 |
Steel rod, bars and wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels |
| EN 10264-1-2002 |
鋼絲和鋼絲制品繩用鋼絲第1部分：一般要求 |
Steel wire and wire products - Steel wire for ropes - Part 1: General requirements |
| EN 10264-2-2002 |
鋼絲和鋼絲制品繩用鋼絲第2部分：一般用途繩用冷拔非合金鋼絲 |
Steel wire and wire products - Steel wire for ropes - Part 2: Cold drawn non alloy steel wire for ropes for general applications |
| EN 10264-3-2002 |
鋼絲和鋼絲制品繩用鋼絲第3部分：重載用途圓形和成形非合金鋼絲 |
Steel wire and wire products - Steel wire for ropes - Part 3: Round and shaped non alloyed steel wire for high duty applications |
| EN 10264-4-2002 |
鋼絲和鋼絲制品繩用鋼絲第4部分：不銹鋼鋼絲 |
Steel wire and wire products - Steel wire for ropes - Part 4: Stainless steel wire |
| EN 10265-1995 |
磁性材料鋼板和鋼帶的機械特性和導磁率的規范 |
Magnetic materials - Specification for steel sheet and strip with specified mechanical properties and magnetic permeability |
| EN 10266-2003 |
鋼管、配件和結構空心型材 .產品標準中使用的符號和術語定義 |
Steel tubes, fittings and structural hollow sections - Symbols and definitions of terms for use in product standards |
| EN 10267-1998 |
熱加工溫度下沉淀硬化鐵素體-珠光體鋼 |
Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures |
| EN 10268-1998 |
冷成形用高屈服強度微合金鋼的冷軋扁鋼材交貨一般條件 |
Cold-rolled flat products made of high yield strength micro-alloyed steels for cold forming - General delivery conditions |
| EN 10269-1999 |
規定高溫和/或低溫性能的緊固件用鋼及鎳合金 |
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
| EN 1027-2000 |
門窗 水密封性 試驗方法 |
Windows and doors - Watertightness - Test method |
| EN 10270-1-2001 |
機械彈簧用鋼絲第1部分：冷拔純鋼絲/注：與EN10021聯合使用 |
Steel wire for mechanical springs - Part 1: Patented cold drawn unalloyed steel wire / Note: Applies in conjunction with EN 10021 |
| EN 10270-2-2001 |
機械彈簧用鋼絲第2部分：油淬火和回火彈簧鋼絲/注：與EN10021聯合使用 |
Steel wire for mechanical springs - Part 2: Oilhardened and tempered spring steel wire / Note: Applies in conjunction with EN 10021 |
| EN 10270-3-2001 |
機械彈簧用鋼絲第3部分：不銹彈簧鋼絲/注：只與EN10021聯合使用 |
Steel wire for mechanical springs - Part 3: Stainless spring steel wire / Note: Applies only in conjunction with EN 10021 |
| EN 10271-1998 |
電鍍鋅鎳的扁鋼材交貨技術條件 |
Electrolytically zinc-nickel (ZN) coated steel flat products - Technical delivery conditions |
| EN 10272-2000 |
壓力用途的不銹鋼棒材 |
Stainless steel bars for pressure purposes |
| EN 10273-2000 |
壓力用途的規定高溫度性能的熱軋可焊接鋼棒 |
Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties |
| EN 10274-1999 |
金屬材料重物跌落扯裂試驗 |
Metallic materials - Drop weight tear test |
| EN 10275-1999 |
金屬材料管式環液壓試驗 |
Metallic materials - Tube ring hydraulic pressure test |
| EN 10276-1-2000 |
鋼鐵材料的化學分析鋼和鐵中氧的測定第1部分：氧含量測定中鋼試樣的取樣和制備 |
Chemical analysis of ferrous materials - Determination of oxygen in steel and iron - Part 1: Sampling and preparation of steel samples for oxygen determination |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com