標準號 |
中文名稱 |
英文名稱 |
| DIN EN ISO 8733-1998 |
未淬硬鋼或奧氏體不銹鋼制帶內螺孔的平行銷 |
Parallel pins with internal thread, of unhardened and austenitic stainless steel (ISO 8733:1997); German version EN ISO 8733:1997 |
| DIN EN ISO 8734-1998 |
淬硬鋼和馬氏體不銹鋼制平行銷 |
Parallel pins of hardened and martensitic stainless steel (Dowel pins) (ISO 8734:1997); German version EN ISO 8734:1997 |
| DIN EN ISO 8735-1998 |
淬硬鋼和馬氏體不銹鋼制帶內螺紋的平行銷 |
Parallel pins with internal thread, of hardened and martensitic stainless steel (ISO 8735:1997); German version EN ISO 8735:1997 |
| DIN EN ISO 8739-1998 |
槽銷.帶導向的全長平行槽 |
Grooved pins - Full-length parallel grooved, with pilot (ISO 8739:1997); German version EN ISO 8739:1997 |
| DIN EN ISO 8740-1998 |
槽銷.帶倒角的全長平行槽 |
Grooved pins - Full-length parallel grooved, with chamfer (ISO 8740:1997); German version EN ISO 8740:1997 |
| DIN EN ISO 8741-1998 |
槽銷.半長倒錐槽 |
Grooved pins - Half-length reverse-taper grooved (ISO 8741:1997); German version EN ISO 8741:1997 |
| DIN EN ISO 8742-1998 |
槽銷.三分之一長中心槽 |
Grooved pins - One-third-length centre grooved (ISO 8742:1997); German version EN ISO 8742:1997 |
| DIN EN ISO 8743-1998 |
槽銷.半長中心槽 |
Grooved pins - Half-length centre grooved (ISO 8743:1997); German version EN ISO 8743:1997 |
| DIN EN ISO 8744-1998 |
槽銷.全長錐型槽 |
Grooved pins - Full-length taper grooved (ISO 8744:1997); German version EN ISO 8744:1997 |
| DIN EN ISO 8745-1998 |
槽銷.半長錐型槽 |
Grooved pins - Half-length taper grooved (ISO 8745:1997); German version EN ISO 8745:1997 |
| DIN EN ISO 8746-1998 |
圓頭槽銷 |
Grooved pins with round head (ISO 8746:1997); German version EN ISO 8746:1997 |
| DIN EN ISO 8747-1998 |
沉頭槽銷 |
Grooved pins with countersunk head (ISO 8747:1997); German version EN ISO 8747:1997 |
| DIN EN ISO 8748-1998 |
彈簧型開口直銷.重載盤繞式 |
Spring-type straight pins - Coiled, heavy duty (ISO 8748:1997); German version EN ISO 8748:1997 |
| DIN EN ISO 8750-1998 |
彈簧型開口直銷.標準負荷盤繞式 |
Spring-type straight pins - Coiled, standard duty (ISO 8750:1997); German version EN ISO 8750:1997 |
| DIN EN ISO 8751-1998 |
彈簧型開口直銷.輕負荷盤繞式 |
Spring-type straight pins - Coiled, light duty (ISO 8751:1997); German version EN ISO 8751:1997 |
| DIN EN ISO 8752-1998 |
彈簧直銷.開槽重型 |
Spring-type straight pins - Slotted, heavy duty (ISO 8752:1997); German version EN ISO 8752:1997 |
| DIN EN ISO 8754-1995 |
石油產品.硫含量測定.能量分散X射線熒光法 |
Petroleum products - Determination of sulfur content - Energy-dispersive-X-ray fluorescence method (ISO 8754:1992); German version EN ISO 8754:1995 |
| DIN EN ISO 8765-2001 |
有米制細牙螺紋的六角頭螺栓.產品等級A和B |
Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:1999); German version EN ISO 8765:2000 |
| DIN EN ISO 877-1997 |
塑料.自然風化法,窗玻璃后照射法和用夫累內爾鏡光照輻射加速風化法 |
Plastics - Methods of exposure to direct weathering, to weathering using glass-filtered daylight and to intensified weathering by daylight using Fresnel mirrors (ISO 877:1994): German version EN ISO 877:1996 |
| DIN EN ISO 8780-1-1995 |
顏料和稀釋劑.色散特性評定用色散方法.第1部分:前言 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 1: Introduction (ISO 8780-1:1990); German version EN ISO 8780-1:1995 |
| DIN EN ISO 8780-2-1995 |
顏料和稀釋劑.色散特性評定用色散方法.第2部分:色散用振蕩搖動機 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 2: Dispersion using an oscillatory shaking machine (ISO 8780-2:1990); German version EN ISO 8780-2:1995 |
| DIN EN ISO 8780-3-1995 |
顏料和稀釋劑.色散特性評定用色散方法.第3部分:色散用高速葉輪機 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 3: Dispersion using a high-speed impeller mill (ISO 8780-3:1990); German version EN ISO 8780-3:1995 |
| DIN EN ISO 8780-4-1995 |
顏料和稀釋劑.色散特性評定用色散方法.第4部分:色散用壓片機 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 4: Dispersion using a bead mill (ISO 8780-4:1990); German version EN ISO 8780-4:1995 |
| DIN EN ISO 8780-5-1995 |
顏料和稀釋劑.色散特性評定用色散方法.第5部分:色散用自動研磨機 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 5: Dispersion using an automatic muller (ISO 8780-5:1990); German version EN ISO 8780-5:1995 |
| DIN EN ISO 8780-6-1995 |
顏料和稀釋劑.色散特性評定用色散方法.第6部分:色散用三組鎮壓機 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 6: Dispersion using a triple-roll mill (ISO 8780-6:1990); German version EN ISO 8780-6:1995 |
| DIN EN ISO 8781-1-1995 |
顏料和稀釋劑.色散特性評定方法.第1部分:有色顏料著色度變化的評定 |
Pigments and extenders - Methods of assessment of dispersion characteristics - Part 1: Assessment from the change in tinting strength of coloured pigments (ISO 8781-1:1990); German version EN ISO 8781-1:1995 |
| DIN EN ISO 8781-2-1995 |
顏料和稀釋劑.色散特性評定方法.第2部分:磨碎細度變化的評定 |
Pigments and extenders - Methods of assessment of dispersion characteristics - Part 2: Assessment from the change in fineness of grind (ISO 8781-2:1990); German version EN ISO 8781-2:1995 |
| DIN EN ISO 8781-3-1995 |
顏料和稀釋劑.色散特性評定方法.第3部分:光澤變化評定 |
Pigments and extenders - Methods of assessment of dispersion characteristics - Part 3: Assessment from the change in gloss (ISO 8781-3:1990); German version EN ISO 8781-3:1995 |
| DIN EN ISO 8785-1999 |
幾何制品技術規格.表面不完全性.術語、定義和參數 |
Geometrical Product Specifications (GPS) - Surface imperfections - Terms, definitions and parameters (ISO 8785:1998); German version EN ISO 8785:1999 |
| DIN EN ISO 8795-2001 |
人類生活用水的塑料輸水管道系統.遷移評定.塑料管、配件及其接頭遷移值的測定 |
Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Determination of migration values of plastics pipes and fittings and their joints (ISO 8795:2001); German version EN ISO 8795:2001 |
| DIN EN ISO 8799-1995 |
表面活性劑.硫酸乙氧乙醇和硫酸乙氧烷基苯酚.非硫化物含量的測量 |
Surface active agents - Sulfated ethoxylated alcohols and alkylphenols - Determination of content of unsulfated matter (ISO 8799:1988); German version EN ISO 8799:1995 |
| DIN EN ISO 8819-1995 |
液化石油氣.硫化氫的測定.醋酸鉛法 |
Liquefied petroleum gases - Detection of hydrogen sulfide - Lead acetate method (ISO 8819:1993); German version EN ISO 8819:1995 |
| DIN EN ISO 8847-2004 |
小艇.操舵裝置.鋼索和滑輪系統 |
|
| DIN EN ISO 8849-2004 |
小艇.電動直流艙底泵 |
(Small craft - Electrically operated direct-current bilge pumps (ISO 8849:2003); German version EN ISO 8849:2003) |
| DIN EN ISO 8849-2004 |
小艇.電動直流艙底泵 |
|
| DIN EN ISO 8861-1998 |
造船.柴油機船的發動機室的通風.設計要求和計算依據 |
Shipbuilding - Engine-room ventilation in diesel-engined ships - Design requirements and basis of calculations (ISO 8861:1998); German version EN ISO 8861:1998 |
| DIN EN ISO 887-2000 |
通用米制螺栓、螺釘和螺母用的平墊圈.一般示意圖 |
Plain washers for metric bolts, screws and nuts for general purposes - General plan (ISO 887:2000); German version EN ISO 887:2000 |
| DIN EN ISO 8871-1-2004 |
非腸道及制藥設備用彈性件.第1部分:水蒸汽中的提取物 |
|
| DIN EN ISO 8871-2-2004 |
非腸道及制藥設備用彈性件.第2部分:識別和表征 |
|
| DIN EN ISO 8871-3-2004 |
非腸道及制藥設備用彈性件.第3部分:釋放粒子計數的測定 |
|
| DIN EN ISO 8891-2000 |
貴金屬含量至少為25%但小于75%的牙科用鑄造合金 |
Dental casting alloys with noble metal content of at least 25 % but less than 75 % (ISO 8891:1998); German version EN ISO 8891:2000 |
| DIN EN ISO 8892-1995 |
油料種子殘渣.己烷總殘留量的測定 |
Oilseed residues - Determination of total residual hexane (ISO 8892:1987); German version EN ISO 8892:1995 |
| DIN EN ISO 8968-1-2002 |
牛奶.測定氮含量.第1部分:基耶達爾法 |
Milk - Determination of nitrogen content - Part 1: Kjeldahl method (ISO 8968-1:2001); German version EN ISO 8968-1:2001 |
| DIN EN ISO 8968-2-2002 |
牛奶.測定氮含量.第2部分:分段容積法(宏觀法) |
Milk - Determination of nitrogen content - Part 2: Block-digestion method (Macro method) (ISO 8968-2:2001); German version EN ISO 8968-2:2001 |
| DIN EN ISO 8968-4-2002 |
牛奶.測定氮含量.第4部分:無蛋白質的氮含量測定 |
Milk - Determination of nitrogen content - Part 4: Determination of the non-protein-nitrogen content (ISO 8968-4:2001); German version EN ISO 8968-4:2001 |
| DIN EN ISO 8968-5-2002 |
牛奶.測定氮含量.第5部分:蛋白質的氮含量測定 |
Milk - Determination of nitrogen content - Part 5: Determination of protein-nitrogen content (ISO 8968-5:2001); German version EN ISO 8968-5:2001 |
| DIN EN ISO 8973-2000 |
液化石油氣.密度和蒸氣壓力的計算 |
Liquefied petroleum gases - Calculation for density and vapour pressure (ISO 8973:1997); German version EN ISO 8973:1999 |
| DIN EN ISO 8974-2002 |
塑料.酚醛樹脂.用氣體色譜法測定殘余酚含量 |
Plastics - Phenolic resins - Determination of residual phenol content by gas chromatography (ISO 8974:2002); German version EN ISO 8974:2002 |
| DIN EN ISO 898-1-1999 |
碳鋼和合金鋼制緊固件的機械性能.第1部分:螺栓,螺桿和雙頭螺栓 |
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs (ISO 898-1:1999); German version EN ISO 898-1:1999 |
| DIN EN ISO 898-5-1998 |
碳鋼和合金鋼制連接件的機械性能.第5部分:螺銷和類似非拉伸受力的連接件 |
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar fasteners not under tensile stress (ISO 898-5:1998); German version EN ISO 898-5:1998 |
| DIN EN ISO 898-6-1996 |
緊固件的機械性能.第6部分:帶規定試驗力的螺母.細牙螺紋 |
Mechanical properties of fasteners - Part 6: Nuts with specified proof load values; fine pitch thread (ISO 898-6:1994); German version EN ISO 898-6:1995 |
| DIN EN ISO 8980-1-1997 |
眼科光學.未打磨完成的眼鏡片.第1部分:單光多焦透鏡片規范 |
Ophthalmic optics - Uncut finished spectacle lenses - Part 1: Specifications for single-vision and multifocal lenses (ISO 8980-1:1996); German version EN ISO 8980-1:1997 |
| DIN EN ISO 8980-1-2004 |
眼科光學.未切邊成品眼鏡片.第1部分:單焦點和多焦點鏡片規范 |
|
| DIN EN ISO 8980-2-1997 |
眼科光學.未打磨完成的眼鏡片.第2部分:漸變眼鏡片規范 |
Ophthalmic optics - Uncut finished spectacle lenses - Part 2: Specifications for progressive power lenses (ISO 8980-2:1996); German version EN ISO 8980-2:1997 |
| DIN EN ISO 8980-2-2004 |
眼科光學.未切邊成品眼鏡片.第2部分:漸變焦眼鏡片規范 |
|
| DIN EN ISO 8980-3-1999 |
眼科光學.未打磨完成的眼鏡片.第3部分:透射要求和檢驗方法 |
Ophthalmic optics - Uncut finished spectacle lenses - Part 3: Transmittance specifications and test methods (ISO 8980-3:1999); German version EN ISO 8980-3:1999 |
| DIN EN ISO 8980-4-2000 |
眼科光學.未打磨成品柔性焦距透鏡組.第4部分:防反射涂層的試驗方法和規范 |
Ophthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test methods for anti-reflection coatings (ISO 8980-4:2000); German version EN ISO 8980-4:2000 |
| DIN EN ISO 8980-5-2005 |
眼科光學.未切邊的成品眼鏡鏡片.第5部分:眼鏡鏡片表面耐磨性的最低要求 |
|
| DIN EN ISO 8985-1998 |
塑料.乙烯/乙烯基乙酸鹽共聚物(ENAC)熱塑性.乙烯基乙酸鹽含量的測定 |
Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content (ISO 8985:1998); German version EN ISO 8985:1998 |
| DIN EN ISO 8986-1-1999 |
塑料.聚丁烯模制品和擠塑材料.第1部分:命名體系與基礎規范. |
Plastics - Polybutene (PB) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 8986-1:1993); German version EN ISO 8986-1:1999 |
| DIN EN ISO 8986-2-2000 |
塑料.聚丁烯(PB)模塑和擠制材料.第2部分:試樣的制備和性能的測定.(包括修改件A1-2000) |
Plastics - Polybutene (PB) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 8986-2:1995 + AMD 1:2000) (includes Amendment A1:2000); German version EN ISO 8986-2:2000 |
| DIN EN ISO 8987-1998 |
塑料.酚醛樹脂.在B轉變試驗板上的活性測定 |
Plastics - Phenolic resins - Determination of reactivity on a B-transformation test plate (ISO 8987:1995); German version EN ISO 8987:1998 |
| DIN EN ISO 8987-2005 |
塑料.酚醛樹脂.在B轉變試驗板上的活化性能的測定 |
|
| DIN EN ISO 8988-1997 |
塑料.酚醛樹脂.六亞甲基四胺含量的測定.基耶達斯法和高氯酸法 |
Plastics - Phenolic resins - Determination of hexamethylenetetramine content - Kjeldahl method and perchloric acid method (ISO 8988:1995); German version EN ISO 8988:1997 |
| DIN EN ISO 8989-1998 |
塑料.酚醛樹脂.水的可混性的測定 |
Plastics - Phenolic resins - Determination of water miscibility (ISO 8989:1995); German version EN ISO 8989:1998 |
| DIN EN ISO 899-1-1997 |
塑料.蠕變的測定.第1部分:拉申蠕變 |
Plastics - Determination of creep behaviour - Part 1: Tensile creep (ISO 899-1:1993); German version EN ISO 899-1:1996 |
| DIN EN ISO 899-2-1997 |
塑料.蠕變性能的測定.第2部分:三點負載時彎曲蠕變 |
Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:1993); German version EN ISO 899-2:1996 |
| DIN EN ISO 8990-1996 |
熱絕緣.穩定狀態中熱通過特性的測定.校正及屏蔽的隔熱箱法 |
Thermal insulation - Determination of steady-state thermal transmission properties - Calibrated and guarded hot box (ISO 8990:1994); German version EN ISO 8990:1996 |
| DIN EN ISO 8996-2005 |
熱環境的人類工效學.代謝率的測定 |
|
| DIN EN ISO 90-1-1999 |
輕型測量金屬容器.尺寸和容量測定的定義和方法.第1部分:頂開口罐 |
Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 1: Open-top cans (ISO 90-1:1997); German version EN ISO 90-1:1999 |
| DIN EN ISO 90-2-1999 |
輕型測量金屬容器.尺寸和容量測定的定義和方法.第2部分:通用容器 |
Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 2: General use containers (ISO 90-2:1997); German version EN ISO 90-2:1999 |
| DIN EN ISO 90-3-2001 |
輕型金屬容器.尺寸和容量測定的定義和方法.第3部分:氣溶膠罐 |
Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 3: Aerosol cans (ISO 90-3:2000); German version EN ISO 90-3:2001 |
| DIN EN ISO 9000 Berichtigung 1-2003 |
對DIN EN ISO 9000:2000-12的技術勘誤 |
Corrigenda to DIN EN ISO 9000:2000-12 |
| DIN EN ISO 9000-2000 |
質量管理體系.基礎和詞匯 |
Quality management systems - Fundamentals and vocabulary (ISO 9000:2000); Trilingual version EN ISO 9000:2000 |
| DIN EN ISO 9000-2005 |
質量管理體系.基礎和詞匯 |
|
| DIN EN ISO 9000-3-1998 |
質量管理和質量保證標準.第3部分:ISO 9001-94計算機軟件的開發,供給,安裝和維護應用指南 |
Quality management and quality assurance standards - Part 3: Guidelines for the application of ISO 9001:1994 to the development, supply, installation and maintenance of computer software (ISO 9000-3:1997); Bilingual version EN ISO 9000-3:1997 |
| DIN EN ISO 9001-2000 |
質量管理體系.要求 |
Quality management systems - Requirements (ISO 9001:2000); Trilingual version EN ISO 9001:2000 |
| DIN EN ISO 9004-2000 |
質量管理體系.性能改進導則 |
Quality management systems - Guidelines for performance improvements (ISO 9004:2000); Trilingual version EN ISO 9004:2000 |
| DIN EN ISO 9013-1995 |
焊接和同類工藝.熱切割(氧/燃?xì)饣鹧?表面質量分類和尺寸公差 |
Welding and allied processes - Quality classification and dimensional tolerances of thermally cut (oxygen/fuel gas flame) surfaces (ISO 9013:1992); German version EN ISO 9013:1995 |
| DIN EN ISO 9013-2003 |
熱切割.熱切割分類.產品幾何量技術規范和質量公差 |
(Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2002); German version EN ISO 9013:2002) |
| DIN EN ISO 9018-2004 |
金屬材料焊縫的破壞試驗.十字形和搭接焊縫抗拉試驗 |
|
| DIN EN ISO 9020-1998 |
色漆和清漆用粘合劑.胺類樹脂的自由甲醛含量的測定 |
Binders for paints and varnishes - Determination of free-formaldehyde content of amino resins - Sodium sulfite titrimetric method (ISO 9020:1994, including Technical Corrigendum 1:1996); German version EN ISO 9020:1998 |
| DIN EN ISO 9029-1995 |
原油.水分測定.蒸餾法 |
Crude petroleum - Determination of water - Distillation method (ISO 9029:1990); German version EN ISO 9029:1995 |
| DIN EN ISO 9038-2004 |
液體的耐燃性試驗 |
|
| DIN EN ISO 9047-1998 |
建筑結構.密封料.在不同溫度下的粘附作用/粘聚性能的測定 |
Building construction - Sealants - Determination of adhesion/cohesion properties at variable temperatures (ISO 9047:1989); German version EN ISO 9047:1997 |
| DIN EN ISO 9054-2000 |
硬質泡沫塑料.自結皮高密度材料的試驗方法 |
Cellular plastics, rigid - Test methods for self-skinned, high-density materials (ISO 9054:1990); German version EN ISO 9054:1999 |
| DIN EN ISO 9073-2-1997 |
紡織品.非織物的試驗方法.第2部分:厚度的測定 |
Textiles - Test methods for nonwovens - Part 2: Determination of thickness (ISO 9073-2:1995); German version EN ISO 9073-2:1996 |
| DIN EN ISO 9073-4-1997 |
紡織品.非織物的試驗方法.第4部分:抗撕裂擴展強度的測定 |
Textiles - Test methods for nonwovens - Part 4: Determination of tear resistance (ISO 9073-4:1997); German version EN ISO 9073-4:1997 |
| DIN EN ISO 9073-6-2003 |
紡織品.非織造品的試驗方法.第6部分:吸收性 |
Textiles - Test methods for nonwovens - Part 6: Absorption (ISO 9073-6:2000); German version EN ISO 9073-6:2003 |
| DIN EN ISO 9073-7-1998 |
紡織品.非織造品的試驗方法.第7部分:彎曲長度的測定 |
Textiles - Test methods for non-wovens - Part 7: Determination of bending length (ISO 9073-7:1995); German version EN ISO 9073-7:1998 |
| DIN EN ISO 9073-8-1998 |
紡織品.非織造品的試驗方法.第8部分:液體滲透時間的測定(模擬尿) |
Textiles - Test methods for non-wovens - Part 8: Determination of liquid strike-through time (simulated urine) (ISO 9073-8:1995); German version EN ISO 9073-8:1998 |
| DIN EN ISO 9073-9-1998 |
紡織品.非織造品的試驗方法.第9部分:懸垂系數的測定 |
Textiles - Test methods for non-wovens - Part 9: Determination of drape coefficient (ISO 9073-9:1995); German version EN ISO 9073-9:1998 |
| DIN EN ISO 9093-1-1998 |
小船.船底閥和船體外殼管配件.第1部分:金屬件 |
Small craft - Seacocks and through-hull fittings - Part 1: Metallic (ISO 9093-1:1994); German version EN ISO 9093-1:1997 |
| DIN EN ISO 9093-2-2003 |
小艇.通海旋塞及貫穿艇體配件.第2部分:非金屬的 |
Small craft - Seacocks and through-hull fittings - Part 2: Non-metallic (ISO 9093-2:2002); German version EN ISO 9093-2:2002 |
| DIN EN ISO 9094-1-2003 |
小艇.防火.第2部分:艇體長為15m及以下的小艇 |
(Small craft - Fire protection - Part 1: Craft with a hull length of up to and including 15 m (ISO 9094-1:2003); German version EN ISO 9094-1:2003) |
| DIN EN ISO 9094-2-2003 |
小艇.防火.第2部分:艇體長超過15m的小艇 |
(Small craft - Fire protection - Part 2: Craft with a hull length of over than 15 m (ISO 9094-2:2002); German version EN ISO 9094-2:2002) |
| DIN EN ISO 9097 Berichtigung 1-2001 |
DIN EN ISO 9097-1994的勘誤 |
Corrigendum to DIN EN ISO 9097:1994 (German version EN ISO 9097:1994/A1:2000) |
| DIN EN ISO 9097-1995 |
小型艦船.電扇 |
Small craft - Electric fans (ISO 9097:1991); German version EN ISO 9097:1994 |
| DIN EN ISO 9100-5-2005 |
玻璃容器.真空凸緣瓶口.第5部分:普通規格43和48 |
|
| DIN EN ISO 9100-5-2005 |
玻璃容器.真空凸緣瓶口.第5部分:普通規格43和48 |
|
| DIN EN ISO 9100-5-2005 |
玻璃容器.真空凸緣瓶口.第5部分:普通規格43和48 |
|
| DIN EN ISO 9142-2004 |
膠粘劑.粘接接頭測試用標準試驗室老化條件的選擇指南 |
|
| DIN EN ISO 9163-1998 |
紡織玻璃纖維.粗紗.試樣的制造和浸漬粗紗拉伸強度的測定 |
Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:1996); German version EN ISO 9163:1998 |
| DIN EN ISO 9163-2005 |
紡織玻璃纖維.粗紗.試樣的制備和浸漬粗紗拉伸強度的測定 |
|
| DIN EN ISO 9167-1-1995 |
油菜種子.葡萄糖甙含量測定.第1部分:高性能液相色譜法 |
Rapeseed - Determination of glucosinolates content - Part 1: Method using high-performance liquid chromatography (ISO 9167-1:1992); German version EN ISO 9167-1:1995 |
| DIN EN ISO 9167-2-1997 |
油菜種子.葡萄糖甙含量測定.第2部分:X線熒光分析法 |
Rapeseed - Determination of glucosinolates content - Part 2: Method using X-ray fluorescence spectrometry (ISO 9167-2:1994); German version EN ISO 9167-2:1997 |
| DIN EN ISO 9173-1-1995 |
拔牙鉗.第1部分:螺釘和鉸鏈接合型 |
Dental extraction forceps - Part 1: Screw and pin joint types (ISO 9173-1:1991); German version EN ISO 9173-1:1995 |
| DIN EN ISO 9187-1-2004 |
醫用注射設備.第1部分:注射用安瓿瓶 |
|
| DIN EN ISO 9220-1995 |
金屬鍍層.鍍層厚度的測量.掃描電子顯微鏡法 |
Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:1988); German version EN ISO 9220:1994 |
| DIN EN ISO 9237-1995 |
紡織品.纖維織物透氣性的測定 |
Textiles - Determination of permeability of fabrics to air (ISO 9237:1995); German version EN ISO 9237:1995 |
| DIN EN ISO 9239-1-2002 |
地板對燃燒試驗反應.第1部分:用輻射熱源測定燃燒特性 |
Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2002); German version EN ISO 9239-1:2002 |
| DIN EN ISO 9241-1-2002 |
具有可視顯示終端(VDTs)的辦公室工作的人類工效學要求.第1部分:概述 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 1: General introduction (ISO 9241-1:1997) (including Amendment AMD 1:2001); German version EN ISO 9241-1:1997 + A1:2001 |
| DIN EN ISO 9241-10-1996 |
用屏幕終端的辦公室工作的人類工效學要求.第10部分:對話結構的原理 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 10: Dialogue principles (ISO 9241-10:1996); German version EN ISO 9241-10:1996 |
| DIN EN ISO 9241-11-1999 |
具有可視顯示終端(VDTs)的辦公室工作的人類工效學要求.第11部分:使用性能指南 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 11: Guidance on usability (ISO 9241-11:1998); German version EN ISO 9241-11:1998 |
| DIN EN ISO 9241-12-2000 |
具有可視顯示終端(VDTs)的辦公室工作的人類工效學要求.第12部分:信息表示法 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 12: Presentation of information (ISO 9241-12:1998); German version EN ISO 9241-12:1998 |
| DIN EN ISO 9241-13-2000 |
具有可視顯示終端(VDTs)的辦公室工作的人類工效學要求.第13部分:用戶導則 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 13: User guidance (ISO 9241-13:1998); German version EN ISO 9241-13:1998 |
| DIN EN ISO 9241-14-2000 |
具有可視顯示終端(VDTs)的辦公室工作的人類工效學要求.第14部分:對話菜單 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 14: Menu dialogues (ISO 9241-14:1997); German version EN ISO 9241-14:1999 |
| DIN EN ISO 9241-15-1999 |
具有可視顯示終端(VDTs)的辦公室工作的人類工效學要求.第15部分:通過命令語言進行的對話 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 15: Command dialogues (ISO 9241-15:1997); German version EN ISO 9241-15:1997 |
| DIN EN ISO 9241-16-2000 |
帶有可視顯示終端的辦公室工作的人類工效學要求.第16部分:直接操作對話 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 16: Direct-manipulation dialogues (ISO 9241-16:1999); German version EN ISO 9241-16:1999 |
| DIN EN ISO 9241-17-2000 |
具有可視顯示終端(VDTs)的辦公室工作的人類工效學要求.第17部分:表格填寫對話 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 17: Form filling dialogues (ISO 9241-17:1998); German version EN ISO 9241-17:1998 |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com