標準號 |
中文名稱 |
英文名稱 |
| BS EN 60738-1-1999 |
熱敏電阻.直接熱無源分級功能溫度系數.一般規范 |
(Thermistors - Directly heated positive step-function temperature coefficient - Generic specification) |
| BS EN 60738-1-2-1999 |
熱敏電阻.直接熱無源分級功能溫度系數.空白詳細規范.熱件應用用具.評定級EZ |
(Thermistors - Directly heated positive step-function temperature coefficient - Blank detail specification - Heating element application - Assessment level EZ) |
| BS EN 60738-1-3-1999 |
熱敏電阻.直接熱無源分級功能溫度系數.空白詳細規范.涌電流應用.評定級EZ |
Thermistors - Directly heated positive step-function temperature coefficient - Blank detail specification - Inrush current application - Assessment level EZ |
| BS EN 60738-1-4-1999 |
熱敏電阻.直接熱無源分級功能溫度系數.空白詳細規范.感應應用.評定級EZ |
(Thermistors - Directly heated positive step-function temperature coefficient - Blank detail specification - Sensing application - Assessment level EZ) |
| BS EN 60743-2002 |
帶電作業.工具和設備術語 |
(Live working - Terminology for tools, equipment and devices) |
| BS EN 60745-1-2003 |
手持式電動工具.安全性.一般要求 |
(Hand-held motor-operated electric tools - Safety - General requirements) |
| BS EN 60745-2-1-2003 |
手持式電動工具的安全.電鉆和沖擊鉆的特殊要求 |
(Hand-held motor-operated electric tools - Safety - Particular requirements for drills and impact drills) |
| BS EN 60745-2-11-2003 |
手持式電動工具的安全.往復鋸(曲線鋸和刀鋸)的特殊要求 |
(Hand-held motor-operated electric tools - Safety - Particular requirements for reciprocating saws (jig and sabre saws)) |
| BS EN 60745-2-12-2004 |
手持式電動工具的安全.混凝土振搗器的特殊要求 |
|
| BS EN 60745-2-14-2003 |
手持式電動工具.安全.刨床的特殊要求 |
(Hand-held motor-operated electric tools - Safety - Particular requirements for planers) |
| BS EN 60745-2-17-2003 |
手持式電動工具的安全.木銑和修整機的特殊要求 |
(Hand-held motor-operated electric tools - Safety - Particular requirements for routers and trimmers) |
| BS EN 60745-2-18-2004 |
手持式電動工具的安全.打包工具的特殊要求 |
|
| BS EN 60745-2-18-2004 |
手持式電動工具.安全性 |
|
| BS EN 60745-2-18-2004 |
手持式電動工具.安全性 |
|
| BS EN 60745-2-2-2003 |
手持式電動工具的安全.電動旋具和沖擊扳手的特殊要求 |
(Hand-held motor-operated electric tools - Safety - Particular requirements for screwdrivers and impact wrenches) |
| BS EN 60745-2-20-2003 |
手持式電動工具.安全.帶鋸的特殊要求 |
(Hand-held motor-operated electric tools - Safety - Particular requirements for band saws) |
| BS EN 60745-2-4-2003 |
手持式電動工具的安全.盤式除外的砂輪機和拋光機的特殊要求 |
(Hand-held motor-operated electric tools - Safety - Particular requirements for sanders and polishers other than disk type) |
| BS EN 60745-2-5-2003 |
手持式電動工具的安全.圓盤鋸的特殊要求 |
(Hand-held motor-operated electric tools - Safety - Particular requirements for circular saws) |
| BS EN 60745-2-6-2003 |
手持式電動工具的安全.電錘的特殊要求 |
(Hand-held motor-operated electric tools - Safety - Particular requirements for hammers) |
| BS EN 60745-2-8-2003 |
手持式電動工具.安全.剪切機和步?jīng)_輪廓機的特殊要求 |
(Hand-held motor-operated electric tools - Safety - Particular requirements for shears and nibblers) |
| BS EN 60745-2-9-2003 |
手持式電動工具的安全.攻絲機的特殊要求 |
(Hand-held motor-operated electric tools - Safety - Particular requirements for tappers) |
| BS EN 60746-1-2003 |
電化學分析儀性能的表示法.總則 |
(Expression of performance of electrochemical analyzers - General) |
| BS EN 60746-2-2003 |
電化學分析儀性能的表示法.pH值 |
(Expression of performance of electrochemical analyzers - pH value) |
| BS EN 60746-3-2002 |
電化學分析器性能表示.電解質的導電率 |
(Expression of performance of electrochemical analyzers - Electrolytic conductivity) |
| BS EN 60747-15-2004 |
半導體分立器件和集成電路.孤立的電力半導體器件 |
|
| BS EN 60747-15-2004 |
半導體分立器件.孤立的電力半導體器件 |
|
| BS EN 60747-16-1-2002 |
半導體分立器件和集成電路.微波集成電路.放大器 |
(Discrete semiconductor devices and integrated circuits - Microwave integrated circuits - Amplifiers) |
| BS EN 60747-16-10-2004 |
半導體分立器件和集成電路.單片微波集成電路的技術驗收程序 |
|
| BS EN 60747-16-10-2004 |
半導體器件.單片微波集成電路的技術驗收程序(TAS) |
|
| BS EN 60747-16-3-2002 |
分立半導體器件和集成電路.微波集成電路.變頻機 |
(Discrete semiconductor devices and integrated circuits - Microwave integrated circuits - Frequency converters) |
| BS EN 60747-16-4-2004 |
半導體分立器件和集成電路.微波集成電路.開關 |
|
| BS EN 60747-16-4-2004 |
半導體分立器件.微波集成電路.開關 |
|
| BS EN 60747-5-2-1998 |
半導體分立器件和集成電路.光電器件.基礎額定值及特性 |
(Discrete semiconductor devices and integrated circuits - Optoelectronic devices - Essential ratings and characteristics) |
| BS EN 60747-5-3-1998 |
半導體分立器件和集成電路.光電器件.測量方法 |
(Discrete semiconductor devices and integrated circuits - Optoelectronic devices - Measuring methods) |
| BS EN 60749-1-2003 |
半導體器件.機械和氣候試驗方法.總則 |
(Semiconductor devices - Mechanical and climatic test methods - General) |
| BS EN 60749-10-2002 |
半導體器件.機械和氣候試驗方法.機械振動 |
(Semiconductor devices - Mechanical and climatic test methods - Mechanical shock) |
| BS EN 60749-11-2002 |
半導體器件.機械和氣候試驗方法.溫度速變.雙流體浸泡法 |
(Semiconductor devices - Mechanical and climatic test methods - Rapid change of temperature - Two-fluid-bath method) |
| BS EN 60749-12-2002 |
半導體器件.機械和氣候試驗方法.變頻率振動 |
(Semiconductor devices - Mechanical and climatic test methods - Vibration, variable frequency) |
| BS EN 60749-13-2002 |
半導體器件.機械和氣候試驗方法.鹽霧氣氛 |
(Semiconductor devices - Mechanical and climatic test methods - Salt atmosphere) |
| BS EN 60749-14-2003 |
半導體器件.機械和氣候試驗方法.端子的耐久性 |
(Semiconductor devices - Mechanical and climatic test methods - Robustness of terminations (lead integrity)) |
| BS EN 60749-15-2003 |
半導體器件.機械和氣候試驗方法.通孔安裝設備的耐釬焊溫度 |
(Semiconductor devices - Mechanical and climatic test methods - Resistance to soldering temperature for through-hole mounted devices) |
| BS EN 60749-16-2003 |
半導體器件.機械和氣候試驗方法.粒子沖擊噪音探測(PIND) |
(Semiconductor devices - Mechanical and climatic test methods - Particle impact noise detection (PIND)) |
| BS EN 60749-17-2003 |
半導體器件.機械和氣候試驗方法.中子輻照 |
(Semiconductor devices - Mechanical and climatic test methods - Neutron irradiation) |
| BS EN 60749-18-2003 |
半導體器件.機械和氣候試驗方法.電離輻射(總劑量) |
(Semiconductor devices - Mechanical and climatic test methods - Ionizing radiation (total dose)) |
| BS EN 60749-19-2003 |
半導體器件.機械和氣候試驗方法.模剪切強度 |
(Semiconductor devices - Mechanical and climatic test methods - Die shear strength) |
| BS EN 60749-2-2002 |
半導體器件.機械和氣候試驗方法.低氣壓 |
(Semiconductor devices - Mechanical and climatic test methods - Low air pressure) |
| BS EN 60749-20-2003 |
半導體器件.機械和氣候試驗方法.塑料包封的SMDs的抗?jié)窦扳F焊熱度綜合影響 |
(Semiconductor devices - Mechanical and climatic test methods - Resistance of plastic-encapsulated SMDs to the combined effect of moisture and soldering heat) |
| BS EN 60749-22-2003 |
半導體器件.機械和氣候試驗方法.粘接強度 |
(Semiconductor devices - Mechanical and climatic test methods - Bond strength) |
| BS EN 60749-23-2004 |
半導體器件.機械和氣候試驗方法.高溫操作壽命 |
|
| BS EN 60749-24-2004 |
半導體器件.機械和氣候試驗方法.加速耐濕性.無偏差HAST |
|
| BS EN 60749-25-2003 |
半導體器件.機械和氣候試驗方法.溫度循環 |
(Semiconductor devices - Mechanical and climatic test methods - Temperature cycling) |
| BS EN 60749-29-2004 |
半導體器件.機械和氣候試驗方法.閉鎖試驗 |
|
| BS EN 60749-3-2002 |
半導體器件.機械和氣候試驗方法.外觀檢驗 |
(Semiconductor devices - Mechanical and climatic test methods - External visual examination) |
| BS EN 60749-31-2003 |
半導體器件.機械和氣候試驗方法.塑料包封器件的易燃性(內部感應) |
(Semiconductor devices - Mechanical and climatic test methods - Flammability of plastic-encapsulated devices (internally induced)) |
| BS EN 60749-32-2003 |
半導體器件.機械和氣候試驗方法.塑料包封器件的易燃性(外部感應) |
(Semiconductor devices - Mechanical and climatic test methods - Flammability of plastic-encapsulated devices (externally induced)) |
| BS EN 60749-33-2004 |
半導體器件.機械和氣候試驗方法.加速耐濕性.無偏差壓熱器 |
|
| BS EN 60749-34-2004 |
半導體器件.機械和氣候試驗方法.動力循環 |
|
| BS EN 60749-36-2003 |
半導體器件.機械和氣候試驗方法.穩態加速 |
(Semiconductor devices - Mechanical and climatic test methods - Acceleration, steady state) |
| BS EN 60749-4-2002 |
半導體器件.機械和氣候試驗方法.穩態有毒熱高度加速試驗 |
(Semiconductor devices - Mechanical and climatic test methods - Damp heat, steady state, highly accelerated stress test (HAST)) |
| BS EN 60749-5-2003 |
半導體器件.機械和氣候試驗方法.穩態溫度濕度偏差壽命試驗 |
(Semiconductor devices - Mechanical and climatic test methods - Steady-state temperature humidity bias life test) |
| BS EN 60749-6-2002 |
半導體器件.機械和氣候試驗方法.高溫下儲存 |
(Semiconductor devices - Mechanical and climatic test methods - Storage at high temperature) |
| BS EN 60749-7-2002 |
半導體器件.機械和氣候試驗方法.其他殘余氣體的分析和內部水分含量的測量 |
(Semiconductor devices - Mechanical and climatic test methods - Internal moisture content measurement and the analysis of other residual gases) |
| BS EN 60749-8-2003 |
半導體器件.機械和氣候試驗方法.密封 |
(Semiconductor devices - Mechanical and climatic test methods - Sealing) |
| BS EN 60749-9-2002 |
半導體器件.機械和氣候試驗方法.制作性能 |
(Semiconductor devices - Mechanical and climatic test methods - Permanence of marking) |
| BS EN 60751-1996 |
工業鉑電阻溫度計敏感件 |
(Industrial platinum resistance thermometer sensors) |
| BS EN 60756-1991 |
非播放用磁帶錄像機.時基穩定性 |
(Non-broadcast video tape recorders - Time base stability) |
| BS EN 60758-2005 |
人造石英晶體.規范和使用指南 |
|
| BS EN 60763-1-1996 |
層壓板規范.第1部分:定義、分類和一般要求 |
(Specification for laminated pressboard - Definitions, classification and general requirements) |
| BS EN 60763-2-1996 |
層壓板規范.第2部分:試驗方法 |
(Specification for laminated pressboard - Methods of test) |
| BS EN 60763-3-1-1996 |
層壓板規范.第3部分:各種材料規范.活頁1:預壓層壓板規范.型號LB 3.1.1,3.1.2,3.3.1和3.3.2 |
(Specification for laminated pressboard - Specifications for individual materials - Specifications for laminated precompressed board - Types LB 3.1.1, 3.1.2, 3.3.1 and 3.3.2) |
| BS EN 60770-1-1999 |
用于工業處理控制系統的發射機.性能評估方法 |
(Transmitters for use in industrial-process control systems - Methods for performance evaluation) |
| BS EN 60770-2-2003 |
工業過程控制系統用變送器.檢驗和常規試驗方法 |
(Transmitters for use in industrial-process control systems - Methods for inspection and routine testing) |
| BS EN 60774-1-1994 |
VHS型12.65mm(0.5in)磁帶螺旋掃描盒式磁帶錄像系統;第1部分:VHS和袖珍VHS盒式錄像帶系統 |
(Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS - VHS and compact VHS video cassette system) |
| BS EN 60774-2-2000 |
使用VHS型12.65mm(0.5in)磁帶的螺旋掃描盒式磁帶錄像系統.調頻錄音 |
(Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS - FM audio recording) |
| BS EN 60774-3-1994 |
VHS型的12.65mm(0.5 in)螺旋盒式磁帶錄像磁帶系統規范.第1部分:S-VHS |
(Specification for helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS - S-VHS) |
| BS EN 60774-4-2004 |
使用12.65mm(0.5in)磁帶的VHS型螺旋掃描盒式磁帶錄像系統.S-VHS盒式視頻磁帶系統.ET模式 |
|
| BS EN 60789-1992 |
放射性核素成象裝置的特殊和試驗條件.安格型γ射線照相機 |
(Methods of test for Anger type gamma cameras) |
| BS EN 60793-1-1-2003 |
光纖.測量方法和試驗規程.總則和指南 |
(Optical fibres - Measurement methods and test procedures - General and guidance) |
| BS EN 60793-1-20-2002 |
光纖.測量方法和試驗規程.纖維幾何結構 |
(Optical fibres - Measurement methods and test procedures - Fibre geometry) |
| BS EN 60793-1-21-2002 |
光學纖維.測量方法和試驗規程.覆層幾何 |
(Optical fibres - Measurement methods and test procedures - Coating geometry) |
| BS EN 60793-1-22-2002 |
光纖.測量方法和試驗規程.長度測量 |
(Optical fibres - Measurement methods and test procedures - Length measurement) |
| BS EN 60793-1-30-2002 |
光纖.測量方法和試驗規程.纖維驗證試驗 |
(Optical fibres - Measurement methods and test procedures - Fibre proof test) |
| BS EN 60793-1-31-2002 |
光纖.測量方法和試驗規程.抗拉強度 |
(Optical fibres - Measurement methods and test procedures - Tensile strength) |
| BS EN 60793-1-32-2004 |
光纖.測量方法和試驗規程.涂層可剝性 |
|
| BS EN 60793-1-32-2004 |
光纖.測量方法和試驗規程.覆層可剝離性 |
|
| BS EN 60793-1-32-2004 |
光纖.測量方法和試驗規程.覆層可剝離性 |
|
| BS EN 60793-1-33-2002 |
光學纖維.測量方法和試驗規程.應力腐蝕敏感性 |
(Optical fibres - Measurement methods and test procedures - Stress corrosion susceptibility) |
| BS EN 60793-1-34-2002 |
光學纖維.測量方法和試驗規程.纖維卷曲 |
(Optical fibres - Measurement methods and test procedures - Fibre curl) |
| BS EN 60793-1-40-2004 |
光纖.測量方法和試驗規程.衰減 |
|
| BS EN 60793-1-40-2004 |
光纖.測量方法和試驗規程.衰減 |
|
| BS EN 60793-1-40-2004 |
光纖.測量方法和試驗規程.衰減 |
|
| BS EN 60793-1-41-2004 |
光學纖維.測量方法和試驗規程.頻帶寬度 |
|
| BS EN 60793-1-42-2002 |
光學纖維.測量方法和試驗規程.色散 |
(Optical fibres - Measurement methods and test procedures - Chromatic dispersion) |
| BS EN 60793-1-43-2002 |
光學纖維.測量方法和試驗規程.數值孔徑 |
(Optical fibres - Measurement methods and test procedures - Numerical aperture) |
| BS EN 60793-1-44-2002 |
光纖.測量方法和試驗規程.截止波長 |
(Optical fibres - Measurement methods and test procedures - Cut-off wavelength) |
| BS EN 60793-1-45-2004 |
光纖.測量方法和試驗規程.模場直徑 |
|
| BS EN 60793-1-45-2004 |
光纖.測量方法和試驗規程.模場直徑 |
|
| BS EN 60793-1-45-2004 |
光纖.測量方法和試驗規程.模場直徑 |
|
| BS EN 60793-1-46-2002 |
光學纖維.測量方法和試驗規程.光透射率變化的監測 |
(Optical fibres - Measurement methods and test procedures - Monitoring of changes in optical transmittance) |
| BS EN 60793-1-47-2002 |
光學纖維.測量方法和試驗規程.MACROBENDING損耗 |
(Optical fibres - Measurement methods and test procedures - Macrobending loss) |
| BS EN 60793-1-48-2003 |
光學纖維.測量方法和試驗規程.偏振模色散 |
(Optical fibres - Measurement methods and test procedures - Polarization mode dispersion) |
| BS EN 60793-1-49-2003 |
光學纖維.測量方法和試驗規程.模時延差 |
(Optical fibres - Measurement methods and test procedures - Differential mode delay) |
| BS EN 60793-1-50-2002 |
光學纖維.測量方法和試驗規程.濕熱(穩態) |
(Optical fibres - Measurement methods and test procedures - Damp heat (steady state)) |
| BS EN 60793-1-51-2002 |
光學纖維.測量方法和試驗規程.干熱 |
(Optical fibres - Measurement methods and test procedures - Dry heat) |
| BS EN 60793-1-52-2002 |
光學纖維.測量方法和試驗規程.溫度的變化 |
(Optical fibres - Measurement methods and test procedures - Change of temperature) |
| BS EN 60793-1-53-2002 |
光學纖維.測量方法和試驗規程.浸水 |
(Optical fibres - Measurement methods and test procedures - Water immersion) |
| BS EN 60793-1-54-2003 |
光學纖維.測量方法和試驗規程.γ輻射 |
(Optical fibres - Measurement methods and test procedures - Gamma irradiation) |
| BS EN 60793-2-10-2003 |
光纖.產品規范.A1類多模光纖分規范 |
(Optical fibres - Product specifications - Sectional specification for category A1 multimode fibres) |
| BS EN 60793-2-10-2005 |
光纖.產品規范.A1類多模光纖分規范 |
|
| BS EN 60793-2-20-2002 |
光學纖維.產品規范.類別 A2多模光纖的分規范 |
(Optical fibres - Product specifications - Sectional specification for category A2 multimode fibres) |
| BS EN 60793-2-2004 |
光纖.產品規范.總則 |
|
| BS EN 60793-2-30-2003 |
光纖.產品規范.A3類多模光纖分規范 |
(Optical fibres - Product specifications - Sectional specification for category A3 multimode fibres) |
| BS EN 60793-2-40-2002 |
光學纖維.產品規范.類別 A4多模光纖的分規范 |
(Optical fibres - Product specifications - Sectional specification for category A4 multimode fibres) |
| BS EN 60793-2-50-2003 |
光纖.產品規范.B級單模光纖分規范 |
(Optical fibres - Product specifications - Sectional specification for class B single-mode fibres) |
| BS EN 60793-2-50-2004 |
光纖.產品規范.B級單模纖維的分規范 |
|
| BS EN 60793-2-50-2004 |
光纖.產品規范.B級單模纖維的分規范 |
|
| BS EN 60794-1-1-2002 |
光纖電纜.一般規范.總則 |
(Optical fibre cables - Generic specification - General) |
| BS EN 60794-1-2-2003 |
光學纖維電纜.總規范.基礎光纜試驗規程 |
(Optical fibre cables - Generic specification - Basic optical cable test procedures) |
| BS EN 60794-2-10-2003 |
光纜.室內光纜.單股光纜和雙股光纜的類規范 |
(Optical fibre cables - Indoor cables - Indoor cables - Family specification for simplex and duplex cables) |
| BS EN 60794-2-20-2003 |
光纜.室內光纜.多纖配電光纜的類規范 |
(Optical fibre cables - Indoor cables - Family specification for multi-fibre optical distribution cables) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com