標準號 |
中文名稱 |
英文名稱 |
| EN 12348-2000 |
立式巖心鉆機安全性 |
Core drilling machines on stand - Safety |
| EN 1235-1995 |
固體肥料 篩分試驗 |
Solid fertilizers - Test sieving (ISO 8397:1988, modified) |
| EN 12350-1-1999 |
新制混凝土試驗第1部分：取樣 |
Testing fresh concrete - Part 1: Sampling |
| EN 12350-2-1999 |
新制混凝土試驗第2部分：坍落度試驗 |
Testing fresh concrete - Part 2: Slump test |
| EN 12350-3-1999 |
新制混凝土試驗第3部分：維勃試驗 |
Testing fresh concrete - Part 3: Vebe test |
| EN 12350-4-1999 |
新制混凝土試驗第4部分：壓實度 |
Testing fresh concrete - Part 4: Degree of compactability |
| EN 12350-5-1999 |
新制混凝土試驗第5部分：流動性試驗 |
Testing fresh concrete - Part 5: Flow table test |
| EN 12350-6-1999 |
新制混凝土試驗第6部分：密度 |
Testing fresh concrete - Part 6: Density |
| EN 12350-7-2000 |
新制混凝土試驗第7部分：含氣量加壓法 |
Testing fresh concrete - Part 7: Air content - Pressure methods |
| EN 123500-800-1992 |
能力詳細規范帶有貫通連接的撓性印制板 |
Capability detail specification; flexible printed boards with through connections |
| EN 123500/prA1-1993 |
分規范帶有貫通連接的撓性印制板修改prA1 |
Sectional specification: flexible printed boards with through connections; amendments |
| EN 12351-1999 |
工業閥門帶法蘭連接的閥門保護帽 |
Industrial valves - Protective caps for valves with flanged connections |
| EN 12352-2000 |
交通控制設備報警和安全燈裝置 |
Traffic control equipment - Warning and safety light devices |
| EN 12353-1999 |
化學消毒劑和防腐劑用于測定殺細菌和殺真菌作用的微生物菌株的保存 |
Chemical disinfectants and antiseptics - Preservation of microbial strains used for the determination of bactericidal and fungicidal activity |
| EN 12354-1-2000 |
建筑聲學根據構件性能評定建筑物的聲學特性第1部分：房間之間的空氣隔聲 |
Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 1: Airborne sound insulation between rooms |
| EN 12354-2-2000 |
建筑聲學根據構件性能評定建筑物的聲學特性第2部分：房間之間的碰撞隔聲 |
Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 2: Impact sound insulation between rooms |
| EN 12354-3-2000 |
建筑聲學根據構件性能評定建筑物的聲學特性第3部分：對于戶外聲音的空氣隔聲 |
Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 3: Airborne sound insulation against outdoor sound |
| EN 12354-4-2000 |
建筑聲學根據構件性能評定建筑物的聲學特性第4部分：室內聲音向外傳輸 |
Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 4: Transmission of indoor sound to the outside |
| EN 12355-2003 |
食品加工機械去殼、去皮及除膜機安全和衛生要求 |
Food processing machinery - Derinding-, skinning-, and membrane removal machines - Safety and hygiene requirements |
| EN 1236-1995 |
肥料 堆積（松）密度的測定 |
Fertilizers - Determination of bulk density (loose) (ISO 3944:1992 modified) |
| EN 123600-1996 |
分規范：帶有貫通連接的剛-撓多層印制板 |
Sectional specification: Flex-rigid multilayer printed boards with through connections |
| EN 12365-1-2003 |
建筑五金件門、窗、百葉窗和幕墻用密封墊和擋風條第1部分：性能要求和分類 |
Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 1: Performance requirements and classification |
| EN 12365-2-2003 |
建筑五金件門、窗、百葉窗和幕墻用密封墊和擋風條第2部分：線性壓力試驗方法 |
Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 2: Linear compression force test methods |
| EN 12365-3-2003 |
建筑五金件門、窗、百葉窗和幕墻用密封墊和擋風條第3部分：偏移回復試驗方法 |
Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 3: Deflection recovery test method |
| EN 12365-4-2003 |
建筑五金件門、窗、百葉窗和幕墻用密封墊和擋風條第4部分：加速老化后復原試驗方法 |
Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 4: Recovery after accelerated ageing test method |
| EN 12368-2000 |
交通控制設備信號燈頭 |
Traffic control equipment - Signal heads |
| EN 12369-1-2001 |
木基板結構設計特征值第1部分： OSB、顆粒板和纖維板 |
Wood-based panels - Characteristic values for structural design - Part 1: OSB, particleboards and fibreboards |
| EN 12369-2-2004 |
木板.結構設計用特征值.第2部分:膠合板 |
|
| EN 1237-1995 |
肥料 堆積（松）密度的測定 |
Fertilizers - Determination of bulk density (tapped) (ISO 5311:1992 modified) |
| EN 12370-1999 |
天然寶石試驗方法抗鹽結晶性的測定 |
Natural stone test methods - Determination of resistance to salt crystallisation |
| EN 123700-1996 |
分規范：帶有貫通連接的剛-撓雙面印制板 |
Sectional specification: Flex-rigid double sided printed boards with through connections |
| EN 12371-2001 |
天然寶石試驗方法防凍性的測定 |
Natural stone test methods - Determination of frost resistance |
| EN 12373-1-2001 |
鋁和鋁合金陽極氧化第1部分：鋁上裝飾和保護陽極氧化膜的測定方法 |
Aluminium and aluminium alloys - Anodizing - Part 1: Method for specifying decorative and protective anodic oxidation coatings on aluminium |
| EN 12373-10-1998 |
鋁和鋁合金陽極氧化第10部分：用磨擦噴射試驗機測定陽極氧化膜的平均比耐磨性 |
Aluminium and aluminium alloys - Anodizing - Part 10: Measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatus |
| EN 12373-11-2000 |
鋁和鋁合金陽極氧化第11部分：20°、45°、60°或85°角處測量陽極氧化膜在的鏡面反射率和鏡面光澤度 |
Aluminium and aluminium alloys - Anodizing - Part 11: Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20? 45? 60?or 85?國際標準分類號：25.220.20 77.120.10英文標準名稱：Aluminium and aluminium alloys |
| EN 12373-12-2000 |
鋁和鋁合金陽極氧化 第12部分：用積分球儀測量鋁表面的反射特性 |
Aluminium and aluminium alloys - Anodizing - Part 12: Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments |
| EN 12373-13-2000 |
鋁和鋁合金陽極氧化 第13部分：用測角光度儀或濾色測角光度儀測量鋁表面的反射特性 |
Aluminium and aluminium alloys - Anodizing - Part 13: Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer |
| EN 12373-14-2000 |
鋁和鋁合金陽極氧化 第14部分：陽極氧化膜成象清晰度的目測座標比例尺法 |
Aluminium and aluminium alloys - Anodizing - Part 14: Visual determination of image clarity of anodic oxidation coatings - Chart scale method |
| EN 12373-15-2000 |
鋁和鋁合金陽極氧化 第15部分：陽極氧化膜抗形變破裂性的評定 |
Aluminium and aluminium alloys - Anodizing - Part 15: Assessment of resistance of anodic oxidation coatings to cracking by deformation |
| EN 12373-16-2001 |
鋁和鋁合金陽極氧化 第16部分：薄陽極氧化膜的連續性檢驗硫酸銅試驗 |
Aluminium and aluminium alloys - Anodizing - Part 16: Check of continuity of thin anodic oxdation coatings; Copper sulfate test |
| EN 12373-17-2001 |
鋁和鋁合金陽極氧化 第17部分：電擊穿電壓的測定 |
Aluminium and aluminium alloys - Anodizing - Part 17: Determination of electric breakdown potential |
| EN 12373-18-2001 |
鋁和鋁合金陽極氧化 第18部分：點蝕評定鋁用檢定系統圖表法 |
Aluminium and aluminium alloys - Anodizing - Part 18: Rating system for the evaluation of pitting corrosion; Chart method |
| EN 12373-19-2001 |
鋁和鋁合金陽極氧化 第19部分：點蝕評定鋁用檢定系統網格法 |
Aluminium and aluminium alloys - Anodizing - Part 19: Rating system for the evaluation of pitting corrosion; Grid method |
| EN 12373-2-1998 |
鋁和鋁合金陽極氧化第2部分：陽極氧化膜單位面積質量（表面密度）的測定重量分析法 |
Aluminium and aluminium alloys - Anodizing - Part 2: Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method |
| EN 12373-3-1998 |
鋁和鋁合金陽極氧化第3部分：陽極氧化膜厚度的測定分束顯微鏡無損測量 |
Aluminium and aluminium alloys - Anodizing - Part 3: Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope |
| EN 12373-4-1998 |
鋁和鋁合金陽極氧化第4部分：通過事先經酸處理的染斑試驗估計封閉后 陽極氧化膜吸收能力的損失 |
Aluminium and aluminium alloys - Anodizing - Part 4: Estimation of loss of absorptive power of anodic oxidation coatings after sealing by dye spot test with prior acid treatment |
| EN 12373-5-1998 |
鋁和鋁合金陽極氧化第5部分：用導納測量法評定封閉陽極氧化膜的質量 |
Aluminium and aluminium alloys - Anodizing - Part 5: Assessment of quality of sealed anodic oxidation coatings by measurement of admittance |
| EN 12373-6-1998 |
鋁和鋁合金陽極氧化第6部分：通過測量事發未經酸處理的磷酸/鉻酸中浸泡后的質量損失評定封閉陽極氧化膜 |
Aluminium and aluminium alloys - Anodizing - Part 6: Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution without prior acid treatment |
| EN 12373-7-2002 |
鋁和鋁合金陽極氧化第7部分：通過測量事發經酸處理的磷酸/鉻酸中浸泡后的質量損失評定封閉陽極氧化膜的 |
Aluminium and aluminium alloys - Anodizing - Part 7: Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution with prior acid treatment |
| EN 12373-8-1998 |
鋁和鋁合金陽極氧化第8部分：著色陽極氧化膜可比耐紫外光和耐熱色牢固度的測定 |
Aluminium and aluminium alloys - Anodizing - Part 8: Determination of the comparative fastness to ultra-violet light and heat of coloured anodic oxidation coatings |
| EN 12373-9-1998 |
鋁和鋁合金陽極氧化第9部分：用磨擦輪磨損試驗機測定陽極氧化膜耐磨性和耐磨系數 |
Aluminium and aluminium alloys - Anodizing - Part 9: Measurement of wear resistance and wear index of anodic oxidation coatings using an abrasive wheel wear test apparatus |
| EN 12374-1998 |
包裝軟管術語 |
Packaging - Flexible tubes - Terminology |
| EN 12375-1998 |
包裝軟鋁管壁厚測定方法 |
Packaging - Flexible aluminium tubes - Wall thickness determination method |
| EN 12376-1999 |
體外診斷醫療器械由制造商提供的有關生物學染色用體外診斷劑的信息 |
In vitro diagnostic medical devices - Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology |
| EN 12377-1998 |
包裝軟管封閉氣密性的試驗方法 |
Packaging - Flexible tubes - Test method for the airtightness of closures |
| EN 1238-1999 |
膠粘劑 熱塑性膠粘劑軟化點的測定（環和球） |
Adhesives - Determination of the softening point of thermoplastic adhesives (ring and ball) |
| EN 12380-2002 |
排水系統用進氣閥要求、試驗方法和合格評定 |
Air admittance valves for drainage systems - Requirements, test methods and evaluation of conformity |
| EN 123800-1996 |
分規范：帶有貫通連接的撓性多層印制板 |
Sectional specification: Flexible multilayer printed boards with through connections |
| EN 12384-1999 |
銅和銅合金帶材彈性彎曲極限的測定 |
Copper and copper alloys - Determination of spring bending limit on strip |
| EN 12385-1-2002 |
鋼絲繩安全性第1部分：一般要求 |
Steel wire ropes - Safety - Part 1: General requirements |
| EN 12385-2-2002 |
鋼絲繩安全性 第2部分：定義、名稱和分類 |
Steel wire ropes - Safety - Part 2: Definitions, designation and classification |
| EN 12385-3-2004 |
鋼絲繩.安全.第3部分:使用和維護的信息 |
|
| EN 12385-4-2002 |
鋼絲繩安全性 第4部分：普通升降設備用多股絞合繩 |
Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applications |
| EN 12385-5-2002 |
鋼絲繩安全性 第5部分：升降機用多股絞合繩 |
Steel wire ropes - Safety - Part 5: Stranded ropes for lifts |
| EN 12385-6-2004 |
鋼絲繩.安全性.第6部分:礦井用標準繩 |
|
| EN 12385-7-2002 |
鋼絲繩安全性 第7部分：礦井用密封鋼絲繩 |
Steel wire ropes - Safety - Part 7: Locked coil ropes for mine shafts |
| EN 12385-8-2002 |
鋼絲繩安全性 第8部分：載人索道設備用多股絞合牽引和承載牽引 |
Steel wire ropes - Safety - Part 8: Stranded hauling and carrying-hauling ropes for cableway installation designed to carry persons |
| EN 12385-9-2002 |
鋼絲繩安全性 第9部分：載人索道設備用承載密封鋼絲繩 |
Steel wire ropes - Safety - Part 9: Locked coil carrying ropes for cableway installations designed to carry persons |
| EN 12386-1998 |
人類生活用水處理用化學制品硫酸銅 |
Chemicals used for treatment of water intended for human consumption - Copper sulfate |
| EN 1239-1998 |
膠粘劑 凍結-熔化穩定性 |
Adhesives - Freeze-thaw stability |
| EN 12390-1-2000 |
硬化混凝土試驗第1部分：試件和模具的形狀、尺寸和其它要求 |
Testing hardened concrete - Part 1: Shape, dimensions and other requirements for specimens and moulds |
| EN 12390-2-2000 |
硬化混凝土試驗第2部分：強度試驗用試件的制作和養護 |
Testing hardened concrete - Part:2: Making and curing specimens for strength tests |
| EN 12390-3-2001 |
硬化混凝土試驗第3部分：試件抗壓強度 |
Testing hardened concrete - Part 3: Compressive strength of test specimens |
| EN 12390-4-2000 |
硬化混凝土試驗 第4部分：抗壓強度試驗機規范 |
Testing hardened concrete - Part 4: Compressive strength - Specification for testing machines |
| EN 12390-5-2000 |
硬化混凝土試驗 第5部分：試件的抗彎強度 |
Testing hardened concrete - Part 5: Flexural strength of test specimens |
| EN 12390-6-2000 |
硬化混凝土試驗 第6部分：試件的抗拉裂強度 |
Testing hardened concrete - Part 6: Tensile splitting strength of test specimens |
| EN 12390-7-2000 |
硬化混凝土試驗 第7部分：硬化混凝土密度 |
Testing hardened concrete - Part 7: Density of hardened concrete |
| EN 12390-8-2000 |
硬化混凝土試驗 第8部分：壓力下的滲水性 |
Testing hardened concrete - Part 8: Depth of penetration of water under pressure |
| EN 12392-2000 |
鋁和鋁合金鍛制品壓力設備生產用制品的特殊要求 |
Aluminium and aluminium alloys - Wrought products - Special requirements for products intended for the production of pressure equipment |
| EN 12393-1-1998 |
不含脂肪食品農藥殘留物氣相色譜測定用多殘留物法第1部分：總則 |
Non-fatty foods - Multiresidue methods for the gas chromatographic determination of pesticide residues - Part 1: General considerations |
| EN 12393-2-1998 |
不含脂肪食品農藥殘留物氣相色譜測定用多殘留物法第2部分：萃取和凈化方法 |
Non-fatty foods - Multiresidue methods for the gas chromatographic determination of pesticide residues - Part 2: Methods for extraction and clean-up |
| EN 12393-3-1998 |
不含脂肪食品農藥殘留物氣相色譜測定用多殘留物法第3部分：測定和驗證試驗 |
Non-fatty foods - Multiresidue methods for the gas chromatographic determination of pesticide residues - Part 3: Determination and confirmatory tests |
| EN 12396-1-1998 |
不含脂肪食品二硫代氨基甲酸鹽和二硫化四烷基秋蘭姆殘留物的測定第1部分：分光光度法 |
Non-fatty foods - Determination of dithiocarbamate and thiuram disulfide residues - Part 1: Spectrometric method |
| EN 12396-2-1998 |
不含脂肪食品二硫代氨基甲酸鹽和二硫化四烷基秋蘭姆殘留物的測定第2 部分：氣相色譜法 |
Non-fatty foods - Determination of dithiocarbamate and thiuram disulfide residues - Part 2: Gas chromatographic method |
| EN 12396-3-2000 |
不含脂肪食品二硫代氨基甲酸鹽和二硫化四烷基秋蘭姆殘留物的測定第3 部分：紫外光譜黃原酸鹽法 |
Non-fatty foods - Determination of dithiocarbamate and thiuram disulfide residues - Part 3: UV spectrometric xanthogenate method |
| EN 12397-2004 |
載人用索道裝置的安全要求.操作 |
|
| EN 124-1994 |
車輛和行人通過區域的排水溝蓋和檢修孔蓋 設計要求、型式試驗、標志、質量控制 |
Gully tops and manhole tops for vehicular and pedestrian areas - Design requirements, type testing, marking, quality control |
| EN 124/prA1-2001 |
車輛和行人通過區域的排水溝蓋和檢修孔蓋 設計要求、型式試驗、標志、質量控制 修改A1 |
Gully tops and manhole tops for vehicular and pedestrian areas - Design requirements, testing, marking, quality control; Amendment A1 |
| EN 1240-1998 |
粘合劑 羥基值和/或羥基含量的測定 |
Adhesives - Determination of hydroxyl value and/or hydroxyl content |
| EN 12400-2002 |
窗和人行門 機械耐久性要求和分類 |
Windows and pedestrian doors - Mechanical durability - Requirements and classification |
| EN 12402-1999 |
鉛和鉛合金分析用取樣方法 |
Lead and lead alloys - Methods of sampling for analysis |
| EN 12403-1998 |
條碼結構化數據文件 |
Bar coding - Structured data files |
| EN 12405-2002 |
氣量計氣體體積電子轉換裝置 |
Gas meters - Gas-volume electronic conversion devices |
| EN 12406-1999 |
交換體C類熱交換體尺寸和一般要求 |
Swap bodies - Thermal swap bodies of class C - Dimensions and general requirements |
| EN 12407-2000 |
天然寶石試驗方法巖相檢驗 |
Natural stone test methods - Petrographic examination |
| EN 12408-2004 |
載人員用索道裝置的安全要求.質量控制 |
|
| EN 12409-1999 |
橡膠和塑料機械熱成形機安全要求 |
Rubber and plastics machines - Thermoforming machines - Safety requirements |
| EN 1241-1998 |
粘合劑 酸值測定 |
Adhesives - Determination of acid value |
| EN 12410-1999 |
交換體A類熱交換物體尺寸和一般要求 |
Swap bodies - Thermal swap bodies of class A - Dimensions and general requirements |
| EN 12412-2-2003 |
窗、門和百葉窗熱性能通過熱箱法測定傳熱系數 第2部分：框架 |
Thermal performance of windows, doors and shutters - Determination of thermal transmittance by hot box method - Part 2: Frames |
| EN 12412-4-2003 |
窗、門和百葉窗熱性能通過熱箱法測定傳熱系數第4部分：卷軸百葉窗盒 |
Thermal performance of windows, doors and shutters - Determination of thermal transmittance by hot box method - Part 4: Roller shutter boxes |
| EN 12413-1999 |
粘合磨料制品的安全要求 |
Safety requirements for bonded abrasive products |
| EN 12414-1999 |
車輛泊位控制設備付款和出票機技術和功能要求 |
Vehicle parking control equipment - Pay and display ticket machine - Technical and functional requirements |
| EN 12416-1-2001 |
固定消防系統粉末系統第1部分：構件的要求和試驗方法 |
Fixed firefighting systems - Powder systems - Part 1: Requirements and test methods for components |
| EN 12416-1/A1-2004 |
固定滅火系統.粉末系統.第1部分:件的要求和試驗方法 |
|
| EN 12416-2-2001 |
固定消防系統粉末系統第2部分：設計、制造和維護/注：包括第3、6、24和36頁的勘誤表 |
Fixed firefighting systems - Powder systems - Part 2: Design, construction and maintenance / Note: Includes Corrigendum of page 3, 6, 24 and page 36 |
| EN 12417-2001 |
機床安全性加工中心 |
Machine tools - Safety - Machining centres |
| EN 12418-2000 |
工作現場用砌石建筑和石料切割機安全性 |
Masonry and stone cutting-off machines for job site - Safety |
| EN 12419-1999 |
呼吸保護器配備全面罩、半面罩或四分之一面罩的輕負荷壓縮空氣管呼吸設備要求、試驗和標志 |
Respiratory protective devices - Light duty construction compressed air line breathing apparatus incorporating a full face mask, half mask or quarter mask - Requirements, testing, marking |
| EN 1242-1998 |
粘合劑 異氰酸酯含量測定 |
Adhesives - Determination of isocyanate content |
| EN 12420-1999 |
銅和銅合金鍛件 |
Copper and copper alloys - Forgings |
| EN 12421-1998 |
鎂和鎂合金純鎂 |
Magnesium and magnesium alloys - Unalloyed magnesium |
| EN 12422-1999 |
劍麻繩 |
Sisal twines |
| EN 12423-1999 |
聚丙烯繩 |
Polypropylene twines |
| EN 12424-2000 |
工業、商業和車庫門、大門抗風荷載能力分類 |
Industrial, commercial and garage doors and gates - Resistance to wind load - Classification |
| EN 12425-2000 |
工業、商業和車庫門、大門抗?jié)B水性分類 |
Industrial, commercial and garage doors and gates - Resistance to water penetration - Classification |
| EN 12426-2000 |
工業、商業和車庫門、大門透氣性分類 |
Industrial, commercial and garage doors and gates - Air permeability - Classification |
| EN 12427-2000 |
工業、商業和車庫門、大門透氣性試驗方法 |
Industrial, commercial and garage doors and gates - Air permeability - Test method |
| EN 12428-2000 |
工業、商業和車庫門、大門傳熱系數計算要求 |
Industrial, commercial and garage doors and gates - Thermal transmittance - Requirements for the calculation |
| EN 12429-1998 |
建筑物保溫制品規定溫度和濕度條件下濕度平衡的調節 |
Thermal insulating products for building applications - Conditioning to moisture equilibrium under specified temperature and humidity conditions |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com