標準號 |
中文名稱 |
英文名稱 |
| DIN EN 23-1-1978 |
粉狀洗滌劑和清潔劑的包裝.紙板盒和圓筒的尺寸和容器 |
(Packages for washing and cleaning powders; dimensions and volumes of cartons and drums from fibre board) |
| DIN EN 230-1991 |
整體油噴嘴.安全.檢驗.調節及安全性時間用裝置 |
(Monobloc oil burners; safety, control and regulation devices and safety times; german version EN 230:1990) |
| DIN EN 230-2005 |
燃油器用自動燃燒器控制系統 |
|
| DIN EN 23015-1994 |
石油產品.煙點測定 |
(Petroleum products; determination of cloud point (ISO 3015:1992); German version EN 23015:1994) |
| DIN EN 23035-1994 |
單面和單壁瓦楞纖維紙板.平面耐壓力的測定 |
(Single-faced and single-wall corrugated fibreboard - Determination of flat crush resistance (ISO 3035:1982); German version EN 23035:1994) |
| DIN EN 2310-1991 |
航空和航天.非金屬材料燃燒特性分類用檢驗法 |
(Aerospace series; test methods for the flame resistance rating of non-metallic materials; german version EN 2310:1991) |
| DIN EN 23107-1992 |
牙科用氧化鋅--丁香酚--粘固劑和氧化鋅--非丁香粉--粘固劑 |
(Dental zinc oxide/eugenol cements and zinc oxide non-eugenol cements (ISO 3107:1988); german version EN 23107:1991) |
| DIN EN 2311-1988 |
航空和航天.有自動潤滑襯層的軸瓦.交貨技術條件 |
(Aerospace series; bushes with self-lubricating liner; technical specification) |
| DIN EN 2318-1993 |
航空和航天.AL-P2024-T3511鋁合金.1,2mm≤a或D≤150mm擠壓棒材和型材 |
(Aerospace series; aluminium alloy AL-P2024-T3511; extruded bars and sections 1,2 mma or D150 mm; German version EN 2318:1992) |
| DIN EN 232-2003 |
浴盆.連接尺寸 |
(Baths - Connecting dimensions; German version EN 232:2003) |
| DIN EN 2326-1992 |
航空和航天.AL-P6082-T6鋁合金.擠壓棒材和型材a或D≤200mm |
(Aerospace series; aluminium alloy AL-P6082-T6; extruded bars and sections a or D200 mm; german version EN 2326:1992) |
| DIN EN 2327-1988 |
航空和航天.航空和航天系列合金鋼向心鋸齒墊圈.尺寸 |
(Aerospace series; washers, lock with radial serrations in alloy steel; dimensions) |
| DIN EN 23270-1991 |
漆.涂層材料以及涂層原材料.預處理和試驗用溫度和空氣濕度 |
(Paints and varnishes and their raw materials; temperatures and humidity for conditioning and testing (ISO 3270:1984); german version EN 23270:1991) |
| DIN EN 2328-1988 |
航空和航天.飛行操縱用墊圈.墊片.尺寸 |
(Aerospace series; washers, tab for flight control rods; dimensions) |
| DIN EN 2329-1993 |
航空航天.玻璃纖維預浸帶.測定單位面積質量的檢驗方法 |
(Aerospace series; textile glass fibre preimpregnates; test method for the determination of mass per unit area; german version EN 2329:1993) |
| DIN EN 233-1999 |
卷式壁襯.成品壁紙.聚乙烯壁紙和塑料壁紙的規范 |
(Wall coverings in roll form - Specification for finished wallpapers, wall vinyls and plastics wallcoverings; German version EN 233:1999) |
| DIN EN 2330-1993 |
航空航天.玻璃纖維預浸帶.測定易揮發成分比例的檢驗方法 |
(Aerospace series; textile glass fibre preimpregnates; test method for the determination of the content of volatile matter; german version EN 2330:1993) |
| DIN EN 2331-1993 |
航空航天.玻璃纖維預浸帶.測定樹脂成份、纖維成份以及單位面積纖維質量的檢驗方法 |
(Aerospace series; textile glass fibre preimpregnates; test method for the determination of the resin and fibre content and mass of fibre per unit area; german version EN 2331:1993) |
| DIN EN 2332-1993 |
航空航天.玻璃纖維預浸帶.測定樹脂流動的檢驗方法 |
(Aerospace series; textile glass fibre preimpregnates; test method for the determination of the resin flow; german version EN 2332:1993) |
| DIN EN 2334-1997 |
航空和航天.鉻硫酸中鋁和鋁合金的酸洗 |
(Aerospace series - Chromic-sulphuric acid pickle of aluminium and aluminium alloys; German version EN 2334:1997) |
| DIN EN 2335-1988 |
航空和航天.耐蝕鋼制不帶導入槽的關節軸承.尺寸和負荷 |
(Aerospace series; bearings-spherical plain in corrosion resisting steel without assembly slot; dimensions and loads) |
| DIN EN 2336-1988 |
航空和航天.耐蝕鋼制帶導入槽的關節軸承.尺寸和負荷 |
(Aerospace series; bearings-spherical plain in steel with assembly slots; dimensions and loads) |
| DIN EN 2337-1996 |
航空和航天.關節軸承.交貨技術條件 |
(Aerospace series - Spherical plain bearings - Technical specification; German version EN 2337:1996) |
| DIN EN 2338-2003 |
航空航天系列.鈦和鈦合金熱軋薄板材.厚度6mm～8mm |
(Aerospace series - Sheets, hot rolled in titanium and titanium alloys - Thickness 0,8 mm a 6 mm; Dimensions; German and English version EN 2338:2001) |
| DIN EN 2339-2003 |
航空航天系列.厚度0.2mma6mm的冷軋鈦和鈦合金薄板.尺寸 |
(Aerospace series - Sheets, cold rolled, in titanium and titanium alloys, thickness 0,2 mma6 mm - Dimensions; German and English version EN 2339:2001) |
| DIN EN 234-1997 |
卷式壁襯.對后處理用壁襯的規定(包括更改A1:1996) |
(Wall coverings in roll form - Specification for wallcoverings for subsequent decoration (includes Amendment A1:1996); German version EN 234:1989 + A1:1996) |
| DIN EN 2344-2003 |
航空航天系列.耐熱合金機械加工圓棒材.直徑10mm～180mm |
(Aerospace series - Round bars, machined, in heat resisting alloys - Diameter 10 mm D 180 mm; Dimensions; German and English version EN 2344:2001) |
| DIN EN 2348-1989 |
航空和航天.飛機操縱鋼索組件.交貨技術條件 |
(Aerospace series; control cable assemblies; technical specification) |
| DIN EN 235-2002 |
墻面飾層.詞匯與符號 |
(Wall coverings - Vocabulary and symbols; German version EN 235:2001) |
| DIN EN 2350-1991 |
航空和航天.保護開關.交貨技術條件 |
(Aerospace series; circuit breakers; technical specification; german version EN 2350:1990) |
| DIN EN 2353-1989 |
航空和航天.不銹鋼制旋轉套筒和操縱鋼索.尺寸和負荷 |
(Aerospace series; turnbarrels, control cable in corrosion resisting steel; dimensions and loads) |
| DIN EN 2354-1989 |
航空和航天.不銹鋼制帶螺紋眼端頭的操縱鋼索.尺寸和負荷 |
(Aerospace series; eye-ends, threaded, control cable in corrosion resisting steel; dimensions and loads) |
| DIN EN 2355-1989 |
航空和航天.不銹鋼制帶螺紋叉端頭的操縱鋼索.尺寸和負荷 |
(Aerospace series; fork-ends, threaded, control cable in corrosion resisting steel; dimensions and loads) |
| DIN EN 2356-1989 |
航空和航天.不銹鋼制滾珠軸承用帶螺紋叉端的操縱鋼索.尺寸和負荷 |
(Aerospace series; fork-ends threaded, control cable for rolling bearing in corrosion resisting steel; dimensions and loads) |
| DIN EN 2357-1989 |
航空和航天.用于張緊操縱鋼索的不銹鋼帶螺紋的鋼索端頭 |
(Aerospace series; stud-ends in corrosion resisting steel swaged on type, control cable; dimensions and loads) |
| DIN EN 2358-1989 |
航空和航天.用于操縱鋼索的不銹鋼帶眼的鋼索端頭 |
(Aerospace series; eye-ends in corrosion resisting steel swaged on type, control cable; dimensions and loads) |
| DIN EN 2359-1989 |
航空和航天.用于張緊操縱鋼索的不銹鋼帶叉的鋼索端頭 |
(Aerospace series; fork-ends in corrosion resisting steel swaged on type, control cable; dimensions and loads) |
| DIN EN 2360-1989 |
航空和航天.用于張緊操縱鋼索的不銹鋼滾珠軸承用帶叉鋼索端頭 |
(Aerospace series; fork-ends for rolling bearings in corrosion resisting steel swaged on type, control cable; dimensions and loads) |
| DIN EN 2361-1989 |
航空和航天.用于張緊操縱鋼索的不銹鋼制雙側帶球頭的鋼索端頭 |
(Aerospace series; ball-ends, double shank in corrosion resisting steel swaged on type, control cable; dimensions and loads) |
| DIN EN 2362-1989 |
航空和航天.用于張緊操縱鋼索的不銹鋼制單側帶球頭的鋼索端頭 |
(Aerospace series; ball-ends in corrosion resisting steel swaged on type, control cable; dimensions and loads) |
| DIN EN 2363-1989 |
航空和航天.操縱鋼索的夾緊裝置用保險彈簧.尺寸 |
(Aerospace series; locking clips for turnbuckles of control cables; dimensions) |
| DIN EN 2364-1989 |
航空和航天.帶帽緊配合銷 |
(Aerospace; pins, shear, headed, close tolerance; german version EN 2364:1989) |
| DIN EN 2365-1989 |
航空和航天.鋁合金環 |
(Aerospace; collars, aluminium alloy; german version EN 2365:1989) |
| DIN EN 23661-1994 |
離心式末端軸吸泵.基座和安裝尺寸 |
(End-suction centrifugal pumps - Baseplate and installation dimensions (ISO 3661:1977); German version EN 23661:1993) |
| DIN EN 2367-1989 |
航空和航天.EN2573鋼制開口銷 |
(Aerospace; split pins in steel EN 2573; german version EN 2367:1989) |
| DIN EN 237-1996 |
液化礦物油制品.燃油.用原子吸收光譜法測定低鉛含量 |
(Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry; German version EN 237:1996) |
| DIN EN 237-2004 |
液態石油產品.汽油.用原子吸收光譜法測定低鉛濃度 |
|
| DIN EN 2374-1991 |
航空和航天.玻璃纖維增強成形材料和芯夾層材料.試驗板的制造 |
(Aerospace series; glass fibre-reinforced mouldings and sandwich composites; production of test panels; german version EN 2374:1991) |
| DIN EN 2375-1992 |
航空和航天.樹脂浸漬材料.從非成品中取樣的方法 |
(Aerospace series; resin preimpregnated materials; production batch sampling procedure; german version EN 2375:1992) |
| DIN EN 23758-1993 |
紡織品.使用符號的保養標記代碼 |
(Textiles; care labelling code using symbols (ISO 3758:1991); German version EN 23758:1993) |
| DIN EN 2377-1989 |
航空和航天.玻璃纖維增強塑料.測定外表層間抗剪強度的檢驗方法 |
(Aerospace series; glass fibre reinforced plastics; test method; determination of apparent interlaminar shear strength; german version EN 2377:1989) |
| DIN EN 2378-1995 |
航空和航天.纖維增強塑料.通過浸入測定吸水量 |
(Aerospace series - Fibre reinforced plastics - Determination of water absorption by immersion; German version EN 2378:1995) |
| DIN EN 238-1996 |
液化礦物油制品.燃油.用紅外線光譜法測定苯含量 |
(Liquid petroleum products - Petrol - Determination of the benzene content by infrared spectrometry; German version EN 238:1996) |
| DIN EN 238-2004 |
液化石油產品.汽油.用紅外線光譜測定法測定苯含量 |
|
| DIN EN 2381-1993 |
航空和航天.AL-P7009-T7452鋁合金.40mm≤a≤150mm自由鍛件 |
(Aerospace series; aluminium alloy AL-P7009-T7452; hand forgings 40 mma150 mm; German version EN 2381:1992) |
| DIN EN 23823-2-1991 |
牙科用旋轉器械.第2部分:鋼及硬金屬制精整磨輪 |
(Dental rotary instruments; part 2: steel and carbide finishing burs (ISO 3823-2:1986); german version EN 23823-2:1991) |
| DIN EN 2384-1992 |
航空和航天.AL-P2014A-T6511鋁合金.擠壓棒材和型材a或D≤150mm |
(Aerospace series; aluminium alloy AL-P2014A-T6511; extruded bars and sections a or D150 mm; german version EN 2384:1992) |
| DIN EN 2385-1993 |
航空和航天.AL-P7009-T74511鋁合金.a或D≤12.5mm擠壓棒材和型材 |
(Aerospace series; aluminium alloy AL-P7009-T74511; extruded bars and sections a or D125 mm; German version EN 2385:1992) |
| DIN EN 2395-1994 |
航空和航天.鋁合金AL-P2014A-T4或T42.薄板和帶材.0.4mm |
(Aerospace series; aluminium alloy AL-P2014A-T4 or T42; sheet and strip; 0,4 mma6 mm; German version EN 2395:1994) |
| DIN EN 24006-1993 |
封閉管道內液體流量的測量.術語和符號 |
(Measurement of fluid flow in closed conduits; vocabulary and symbols (ISO 4006:1991); German version EN 24006:1993) |
| DIN EN 24015-1991 |
六角螺釘.縮桿螺釘(桿直徑≈螺紋中徑)產品等級B(ISO4015-79) |
(Hexagon head bolts, reduced shank (shank diameterpitch diameter); product grade B (ISO 4015:1979); german version EN 24015:1991) |
| DIN EN 241-2000 |
液體石油產品.鈉含量測定.原子吸收分光光度測定法 |
(Liquid petroleum products - Determination of sodium content - Atomic absorption spectrometric method; German version EN 241:2000) |
| DIN EN 2413-1995 |
航空和航天.鍍鎘合金鋼制短螺紋小頭六角緊配合螺桿.等級:1100MPa(室溫235℃) |
(Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 C; German version EN 2413:1995) |
| DIN EN 24159-1990 |
錳鐵和硅錳鐵合金中錳含量的測定.電勢滴定法 |
(Ferromanganese and ferrosilicomanganese; determination of manganese content; potentiometric method (ISO 4159, 1st edition: 1978.12.15); german version EN 24159:1989) |
| DIN EN 24178-1993 |
滿裝的運輸包裝.抽樣檢驗.要記錄的信息 |
(Complete, filled transport packages; distribution trials; information to be recorded (ISO 4178:1980); german version EN 24178:1992) |
| DIN EN 24180-1-1993 |
滿裝的運輸包裝.試驗計劃編制的一般規則.第1部分:一般原則 |
(Complete, filled transport packages; general rules for the compilation of performance test schedules; part 1: general principles (ISO 4180-1:1980); german version EN 24180-1:1992) |
| DIN EN 24180-2-1993 |
滿裝的運輸包裝.試驗計劃編制的一般規則.第2部分:負荷參數 |
(Complete, filled transport packages; general rules for the compilation of performance test schedules; part 2: quantitative data (ISO 4180-2:1980); german version EN 24180-2:1992) |
| DIN EN 24185-1993 |
封閉管道內液體流量測量.稱量方法 |
(Measurement of liqid flow in closed conduits; weighing method (ISO 4185:1980); German version EN 24185:1993) |
| DIN EN 24230-1990 |
R系列.圓錐形管螺紋用手用圓板牙和機用圓板牙(ISO4230:1987) |
(Hand- and machine-operated circular screwing dies for taper pipe threads, R series (ISO 4230:1987); german version EN 24230:1989) |
| DIN EN 24231-1990 |
直管螺紋的手動和機動圓板牙.G系列 |
(Hand and machine-operated circular screwing dies for parallel pipe threads, G series (ISO 4231:1987); german version EN 24231:1989) |
| DIN EN 2424-1995 |
航空和航天.航空和航天產品的標識 |
(Aerospace series - Marking of aerospace products; German version EN 2424:1995) |
| DIN EN 24260-1994 |
石油產品和烴類.硫含量的測定.威克波耳德(Wickbold)燃燒法 |
(Petroleum products and hydrocarbons; determination of sulfur content; Wickbold combustion method (ISO 4260:1987); German version EN 24260:1994) |
| DIN EN 2428-1995 |
航空和航天.乙丙橡膠(EPM/EPDM).硬度:50IRHD |
(Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 50 IRHD; German version EN 2428:1995) |
| DIN EN 2429-1995 |
航空和航天.乙丙橡膠(EPM/EPDM).硬度:60IRHD |
(Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 60 IRHD; German version EN 2429:1995) |
| DIN EN 2430-1995 |
航空和航天.乙丙橡膠(EPM/EPDM).硬度:70IRHD |
(Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 70 IRHD; German version EN 2430:1995) |
| DIN EN 2431-1995 |
航空和航天.乙丙橡膠(EPM/EPDM).硬度:80IRHD |
(Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 80 IRHD; German version EN 2431:1995) |
| DIN EN 2432-1995 |
航空和航天.乙丙橡膠(EPM/EPDM).硬度:90IRHD |
(Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 90 IRHD; German version EN 2432:1995) |
| DIN EN 2437-2003 |
航空航天系列.鋁及鋁合金用鉻酸鹽轉化涂層(黃色) |
(Aerospace series - Chromate conversion coatings (yellow) for aluminium and aluminium alloys; German and English version EN 2437:2001) |
| DIN EN 246-1990 |
衛生設備配件.防濺板的一般要求 |
(Sanitary taps; general specifications for flow rate regulators; german version EN 246:1989) |
| DIN EN 24624-1992 |
清漆和涂料.判斷粘附性的撕裂試驗 |
(Paints and varnishes; pull-off test for adhesion (ISO 4624:1978); german version EN 24624:1992) |
| DIN EN 24641-1993 |
給水和排水用橡膠軟管,要求 |
(Rubber hoses for water suction and discharge; specification (ISO 4641:1991); German version EN 24641:1993) |
| DIN EN 247-1997 |
熱交換器.專業術語 |
(Heat exchangers - Terminology; German version EN 247:1997) |
| DIN EN 24766-1992 |
一字槽平端緊定螺釘 |
(Slotted set screws with flat point (ISO 4766:1983); german version EN 24766:1992) |
| DIN EN 248-2003 |
衛生工程用配件.鎳鉻電鍍層的一般要求 |
(Sanitary tapware - General specification for electrodeposited coatings of Ni-Cr; German version EN 248:2002) |
| DIN EN 24829-1-1992 |
鋼和鑄鐵.硅總含量的測定.還原鉬硅鹽酸分光光度法.第1部分:硅含量在0.05%~1.0%之間 |
(Determination of total silicon content of steel and cast iron by the reduced molybdosilicate spectrophotometric method; silicon contents between 0,05 and 1,0 % (ISO 4829-1:1986); german version EN 24829-1:1990) |
| DIN EN 24829-2-1992 |
鋼和鑄鐵.硅總含量的測定.還原鉬硅鹽酸分光光度法.第2部分:硅含量在0.01%~0.05%之間 |
(Determination of total silicon content of steel and cast iron by the reduced molybdosilicate spectrophotometric method; silicon contents between 0,01 and 0,05 % (ISO 4829-2:1988); german version EN 24829-2:1990) |
| DIN EN 2484-1989 |
航空和航天.制圖膠片.35mm膠卷的縮微膠卷孔卡 |
(Aerospace series; microfilming of drawings; aperture card for 35 mm microfilm; german version EN 2484:1988) |
| DIN EN 24869-3-1994 |
聲學.聽力保護器.質量檢驗用耳罩型保護器測量插入損失的簡易方法 |
(Acoustics; hearing protectors; part 3: simplified method for the measurement of insertion loss of ear-muff type protectors for quality inspection purposes (ISO/TR 4869-3:1989); German version EN 24869-3:1993) |
| DIN EN 2489-1995 |
航空和航天.纖維增強塑料.試驗液體影響的測定 |
(Aerospace series - Fibre reinforced plastics - Determination of the action of test fluids; German version EN 2489:1995) |
| DIN EN 2491-1997 |
航空和航天.二硫化鉬基上的干膜潤滑材料.涂層法 |
(Aerospace series - Molybdenum disulphide dry lubricants - Coating methods; German version EN 2491:1997) |
| DIN EN 24920-1992 |
紡織品.不吸水性能的測定(噴霧試驗法) |
(Textile fabrics; determination of resistance to surface wetting (spray test) (ISO 4920:1981); german version EN 24920:1992) |
| DIN EN 24934-1990 |
鋼和鑄鐵.硫含量的測定.重量分析法 |
(Steel and cast iron; determination of sulfur content; gravimetric method (ISO 4934, 1st edition, 1980.10.01); german version EN 24934:1989) |
| DIN EN 24935-1992 |
鋼和鐵.硫含量的測定.感應爐內燃燒紅外線吸收法 |
(Steel and iron; determination of sulfur content; infrared absorption method after combustion in an induction furnace (ISO 4935:1989); german version EN 24935:1991) |
| DIN EN 24937-1992 |
鋼和鐵.鉻含量的測定.電位滴定法或目視滴定法 |
(Steel and iron; determination of chromium content; potentiometric or visual method (ISO 4937:1986); german version EN 24937:1990) |
| DIN EN 24938-1992 |
鋼和鐵.鎳含量的測量.重量法或滴定法 |
(Steel and iron; determination of nickel content; gravimetric or titrimetric method (ISO 4938:1988); german version EN 24938:1990) |
| DIN EN 24943-1992 |
鋼和鑄鐵.銅含量的測定.火焰原子吸收光譜測定法 |
(Steel and cast iron; determination of copper content; flame atomic absorption spectrometric method (ISO 4943:1985); german version EN 24943:1990) |
| DIN EN 24946-1992 |
鋼和鑄鐵.銅含量的測定.2.2’聯喹啉分光光度法 |
(Steel and cast iron; determination of copper content; 2,2`-diquinolyl spectrophotometric method (ISO 4946:1984); german version EN 24946:1990) |
| DIN EN 24947-1992 |
鋼和鑄鐵.釩含量的測定.電位滴定法 |
(Steel and cast iron; determination of vanadium content; potentiometric titration method (ISO 4947:1986); german version EN 24947:1991) |
| DIN EN 2495-1991 |
航空和航天.單極溫度補償保護開關.額定電流25A以下.產品標準 |
(Aerospace series; single-pole circuit breakers, temperature compensated rated currents up to 25 A; product standard; german version EN 2495:1990) |
| DIN EN 2497-1989 |
航空和航天.鈦和鈦合金的干式輻射 |
(Aerospace series; dry abrasive blasting of titanium and titanium alloys; german version EN 2497:1989) |
| DIN EN 2498-1991 |
航空和航天.帶自動潤滑襯套的滑動軸承和螺桿柄的可調操縱桿端頭.尺寸和負載 |
(Aerospace series; rod ends, adjustable, self-aligning plain bearing with self-lubricating liner and threaded shank; dimensions and loads) |
| DIN EN 2499-1989 |
航空和航天.COM膠卷.縮微膠片A6 |
(Aerospace series; computer output microfilm (COM); A6 microfiche; german version EN 2499:1987) |
| DIN EN 250-2000 |
呼吸器.開路自備壓縮空氣輕型潛水呼吸器.要求、檢驗、標識. |
(Respiratory equipment - Open-circuit self-contained compressed air diving apparatus - Requirements, testing, marking; German version EN 250:2000) |
| DIN EN 2501-1989 |
航空和航天.本身帶潤滑層和寬內環的不銹鋼滑動軸承.尺寸和負載 |
(Aerospace series; bearings, spherical plain in corrosion resisting steel, with self-lubricating liners and wide inner ring; dimensions and loads) |
| DIN EN 25077-1994 |
紡織品.洗滌干燥后尺寸變化的測定 |
(Textiles; determination of dimensional change in washing and drying (ISO 5077:1984); German version EN 25077:1993) |
| DIN EN 251-1991 |
淋浴缸.連接尺寸 |
(Shower trays; connecting dimensions; german version EN 251:1990) |
| DIN EN 251-2003 |
淋浴缸.連接尺寸 |
(Shower trays - Connecting dimensions; German version EN 251:2003) |
| DIN EN 25136-1994 |
聲學.由通風機輻射到導管的聲功率測定,引入法 |
(Acoustics; determination of sound power radiated into a duct by fans; in-duct method (ISO 5136:1990 and Technical Corrigendum 1:1993); German version EN 25136:1993) |
| DIN EN 2515-1991 |
航空和航天.可調帶螺桿柄的單叉頭.尺寸及負載 |
(Aerospace series; rod ends, adjustable single fork and threaded shank; dimensions and loads) |
| DIN EN 2516-1997 |
航空和航天.耐蝕鋼的鈍化和鎳合金的凈化 |
(Aerospace series - Passivation of corrosion resistant steels and decontamination of nickel base alloys; German version EN 2516:1997) |
| DIN EN 25163-1994 |
發動機和航空燃料.抗震性測定.發動機法 |
(Motor and aviation-type fuels; determination of knock characteristics; motor method (ISO 5163:1990); German version EN 25163:1993) |
| DIN EN 25164-1994 |
發動機燃料.抗爆性測定.研究法 |
(Motor fuels; determination of knock characteristics; research method (ISO 5164:1990); German version EN 25164:1993) |
| DIN EN 252-1990 |
木材防腐材料.測定與地面接觸中木材防腐材料的相對防護作用的野外檢測法 |
(Field test method for determining the relative protective effectiveness of a wood preservative in ground contact; german version EN 252:1989) |
| DIN EN 25264-2-1994 |
紙漿.實驗室打漿.第2部分:PFI碾磨法 |
(Pulps - Laboratory beating - Part 2: PFI mill method (ISO 5264-2:1979); German version EN 25264-2:1994) |
| DIN EN 25264-3-1994 |
紙漿.實驗室打漿.第3部分:約克羅(JOKRO)碾磨法 |
(Pulps - Laboratory beating - Part 3: Jokro mill method (ISO 5264-3:1979); German version EN 25264-3:1994) |
| DIN EN 253-2003 |
區域供暖管.直埋式供熱網絡用預隔熱粘結管系統.鋼制接用戶管系的管組件.聚氨脂隔熱層.聚乙烯外管套 |
(District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene; German version EN 253:2003) |
| DIN EN 2536-1995 |
航空和航天.鋁合金的硬度陽級氧化 |
(Aerospace series - Hard anodizing of aluminium alloys; German version EN 2536:1995) |
| DIN EN 2544-1989 |
航空和航天.航空航天設備上的鉚釘圖示法 |
(Aerospace series; representation of rivets on drawings for aerospace equipment; german version EN 2544:1987) |
| DIN EN 2545-1-1995 |
航空和航天.鈦和鈦合金預制材料和鑄件.交貨技術條件.第1部分:一般要求 |
(Aerospace series - Titanium and titanium alloy remelting stock and castings; technical specification - Part 1: General requirements; German version EN 2545-1:1995) |
| DIN EN 2545-2-1995 |
航空和航天.鈦和鈦合金預制材料和鑄件.交貨技術條件.第2部分:預制材料 |
(Aerospace series - Titanium and titanium alloy remelting stock and castings; technical specification - Part 2: Remelting stock; German version EN 545-2:1995) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com