標準號 |
中文名稱 |
英文名稱 |
| BS EN ISO 8351-1-1995 |
包裝.袋包裝規格方法.紙袋 |
(Packaging - Method of specification for sacks - Paper sacks) |
| BS EN ISO 8351-2-1995 |
包裝.袋包裝規格方法.熱塑軟薄膜制成的包裝袋 |
(Packaging - Method of specification for sacks - Sacks made from thermoplastic flexible film) |
| BS EN ISO 8359-1997 |
醫療電氣設備.醫用氧氣濃縮器的安全要求 |
(Medical electrical equipment - Oxygen concentrators for medical use - Safety requirements) |
| BS EN ISO 8362-1-2004 |
注射容器及附件.玻璃管制注射管 |
|
| BS EN ISO 8362-3-2003 |
注射液容器及附件.注射小瓶用的鋁蓋 |
(Injection containers and accessories - Aluminium caps for injection vials) |
| BS EN ISO 8362-4-2004 |
注射容器及附件.模制玻璃注射管 |
|
| BS EN ISO 8367-1-1995 |
包裝.一般用途包裝袋的尺寸公差.紙袋 |
(Packaging - Dimensional tolerances for general purpose sacks - Paper sacks) |
| BS EN ISO 8367-2-1995 |
包裝.一般用途包裝袋的尺寸公差.熱塑性軟薄膜制包裝袋 |
(Packaging - Dimensional tolerances for general purpose sacks - Sacks made from thermoplastic flexible film) |
| BS EN ISO 8373-1996 |
操作工業機器人的詞匯 |
(Manipulating industrial robots - Vocabulary) |
| BS EN ISO 8381-2000 |
以奶為基料的嬰兒食品.脂肪含量的測定.重量分析法(參比法) |
(Milk based infant foods - Determination of fat content - Gravimetric method (Reference method)) |
| BS EN ISO 8384-2001 |
船舶技術.挖泥船.詞匯 |
(Ships and marine technology - Dredgers - Vocabulary) |
| BS EN ISO 8385-1999 |
船舶和航海技術.挖泥船.分類 |
(Ships and marine technology - Dredgers - Classification) |
| BS EN ISO 8388-1998 |
針織物.類型.詞匯 |
(Knitted fabrics - Types - Vocabulary) |
| BS EN ISO 8401-1988 |
金屬鍍層.延展性的測量方法述評 |
(Metallic coatings - Review of methods of measurement of ductility) |
| BS EN ISO 8420-2002 |
動植物脂肪和油.極性化合物含量測定 |
(Animal and vegetable fats and oils - Determination of content of polar compounds) |
| BS EN ISO 8429-1987 |
光學和光學儀器.眼科學.分度盤刻度 |
(Optics and optical instruments - Ophthalmology - Graduated dial scale) |
| BS EN ISO 8434-1-1995 |
液壓傳動和一般用金屬導管的連接.24度壓合接頭 |
(Metallic tube connections for fluid power and general use - 24 ?compression fittings) |
| BS EN ISO 8442-1-1998 |
與食品有關的材料和物品.餐具和桌上凹型器皿.食品準備餐具的要求 |
(Materials and articles in contact with foodstuffs - Cutlery and table holloware - Requirements for cutlery for the preparation of food) |
| BS EN ISO 8442-2-1998 |
與食品有關的材料和物品.餐具和桌上凹型器皿.不銹鋼和鍍銀餐具的要求 |
(Materials and articles in contact with foodstuffs - Cutlery and table holloware - Requirements for stainless steel and silver-plated cutlery) |
| BS EN ISO 8442-3-1998 |
與食品有關的材料和物品.餐具和桌上凹型器皿.鍍銀餐具和裝飾凹盤的要求 |
(Materials and articles in contact with foodstuffs - Cutlery and table holloware - Requirements for silver-plated table and decorative holloware) |
| BS EN ISO 8442-4-1998 |
與食品有關的材料和物品.餐具和桌上凹型器皿.鍍金餐具的要求 |
(Materials and articles in contact with foodstuffs - Cutlery and table holloware - Requirements for gold-plated cutlery) |
| BS EN ISO 8442-5-2005 |
與食品接觸的材料和制品.刀具和凹形餐具.刀具的鋒利性和刃口保持的試驗規范 |
|
| BS EN ISO 8442-5-2005 |
與食品接觸的材料和制品.刀具和凹形餐具.刀具的鋒利性和刃口保持的試驗規范 |
|
| BS EN ISO 8442-6-2001 |
與食品接觸的材料和物品.刀叉餐具和餐桌凹型餐具.薄鍍銀的由清漆保護的餐桌凹形餐具 |
(Materials and articles in contact with foodstuffs - Cutlery and table holloware - Lightly silver plated table holloware protected by laquer) |
| BS EN ISO 8442-7-2001 |
與食品接觸的材料和物品.刀叉餐具和餐桌凹型餐具.由銀、其他貴金屬及其合金制成的刀叉餐具的要求 |
(Materials and articles in contact with foodstuffs - Cutlery and table holloware - Requirements for table cutlery made of silver, other precious metals and their alloys) |
| BS EN ISO 8442-8-2001 |
與食品接觸的材料和物品.刀叉餐具和餐桌凹型餐具.銀制餐具和裝飾性凹形餐具的要求 |
(Materials and articles in contact with foodstuffs - Cutlery and table holloware - Requirements for silver table and decorative holloware) |
| BS EN ISO 845-1995 |
泡沫橡膠和塑料.表觀密度的測定 |
(Cellular plastics and rubbers - Determination of apparent (bulk) density) |
| BS EN ISO 846-1997 |
塑料.真菌或細菌作用下的性狀測定.對用視力檢查或質量變化的測定或物理性質的測定的評估 |
(Plastics - Evaluation of the action of microorganisms) |
| BS EN ISO 8467-1995 |
水質.高錳酸鹽指數的測定 |
(Water quality - Determination of permanganate index) |
| BS EN ISO 8468-1995 |
船橋設計和相關設備.要求和指南 |
(Ship’s bridge layout and associated equipment - Requirements and guidelines) |
| BS EN ISO 8469-1995 |
小型飛機.不耐火的燃料軟管 |
(Small craft - Non-fire-resistant fuel hoses) |
| BS EN ISO 8491-2004 |
金屬材料.管材(全截面).彎曲試驗 |
|
| BS EN ISO 8492-2004 |
金屬材料.管材.壓扁試驗 |
|
| BS EN ISO 8493-2004 |
金屬材料.管材.擴口試驗 |
|
| BS EN ISO 8493-2004 |
金屬材料.管材.擴口試驗 |
|
| BS EN ISO 8494-2004 |
金屬材料.管材.卷邊試驗 |
|
| BS EN ISO 8495-2004 |
金屬材料.管材.環形擴口試驗 |
|
| BS EN ISO 8496-2004 |
金屬材料.管材.環形拉伸試驗 |
|
| BS EN ISO 8497-1997 |
熱絕緣.測定圓管絕熱的穩態熱傳輸性能 |
(Thermal insulation - Determination of steady-state thermal transmission properties of thermal insulation for circular pipes) |
| BS EN ISO 8501-1 Supplement-19 |
涂裝油漆和有關產品前鋼材預處理.表面清潔度的目視評定.不同磨料噴射清理所致鋼材表觀改變的典型樣板照片 |
(Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Representative photographic examples of the change of appearance imparted) |
| BS EN ISO 8501-1-1989 |
涂裝油漆和有關產品前鋼材預處理.表面清潔度的目視評定.未涂裝的鋼材和全面清除原有涂層后鋼材的銹蝕等級和 |
() |
| BS EN ISO 8501-2-1996 |
涂裝油漆和有關產品前鋼材預處理.表面清潔度的目視評定.局部去除原有涂層后鋼材的除銹等級 |
(Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Preparation grades of previously coated steel substrates after localized) |
| BS EN ISO 8502-5-2005 |
涂裝油漆和有關產品前鋼材的預處理.表面清潔度的評定試驗.涂裝前鋼材表面上氯化物的測定(離子探測管法) |
|
| BS EN ISO 8502-5-2005 |
涂裝油漆和有關產品前鋼材的預處理.表面清潔度的評定試驗.涂裝前鋼材表面上氯化物的測定(離子探測管法) |
|
| BS EN ISO 8503-1-1989 |
涂料和有關產品使用前的鋼襯底的制備.噴丸處理鋼基體的表面粗糙度.第1部分:噴砂處理表面的 ISO評定比較樣板 |
() |
| BS EN ISO 8503-2-1989 |
涂料和有關產品使用前的鋼襯底的制備.噴丸處理鋼基體的表面粗糙度.第2部分:噴砂處理表面的定級方法.比較方 |
(Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Method for the grading of surface profile of a) |
| BS EN ISO 8503-3-1989 |
涂料和有關產品使用前的鋼襯底的制備.噴丸處理的鋼襯底的表面粗糙度.ISO表面輪廓比較儀的校準方法和表面輪 |
() |
| BS EN ISO 8503-4-1989 |
涂料和有關產品使用前的鋼襯底的制備.噴丸處理鋼基體的表面粗糙度.第4部分:ISO表面輪廓比較儀的校準方法和 |
() |
| BS EN ISO 8536-1-2003 |
醫用輸液器具.玻璃輸液瓶 |
(Infusion equipment for medical use - Infusion glass bottles) |
| BS EN ISO 8536-2-2002 |
醫用輸液器具.輸液瓶塞 |
(Infusion equipment for medical use - Closures for infusion bottles) |
| BS EN ISO 8536-3-1999 |
醫用輸液設備.輸液瓶鋁帽 |
(Infusion equipment for medical use - Aluminium caps for infusion bottles) |
| BS EN ISO 8536-4-2004 |
醫用輸液器具.一次性使用重力輸液式輸液器 |
|
| BS EN ISO 8536-8-2004 |
醫用輸液器具.與壓力輸液儀器一起使用的輸液器具 |
|
| BS EN ISO 8560-1999 |
建筑圖紙.模數尺寸、直線和格柵的表示法 |
(Construction drawings - Representation of modular sizes, lines and grids) |
| BS EN ISO 8561-1996 |
家用無霜制冷設備.制冷機、制冷機冷藏柜、冷凍食品儲藏柜和用內壓力空氣循環冷卻的食品冷藏柜特性和試驗方 |
(Household refrigerating appliances - Refrigerators, refrigerator-freezers, frozen food storage cabinets and food freezers cooled by forced air circulation - Characteristics and test methods) |
| BS EN ISO 8565-1995 |
金屬及合金.大氣腐蝕試驗.現場試驗的總要求 |
(Metals and alloys - Atmospheric corrosion testing - General requirements for field tests) |
| BS EN ISO 8580-1989 |
橡膠和塑料軟管.靜態條件下的抗紫外線輻射測試 |
(Rubber and plastics hoses - Determination of ultra-violet resistance under static conditions) |
| BS EN ISO 8583-1995 |
有原始信息的金融交易卡.交換信息規范 |
(Financial transaction card originated messages. Interchange message specifications) |
| BS EN ISO 8596-1996 |
視覺敏銳度測驗.非臨床用缺口環驗光字體規范 |
(Visual acuity test types - Specification for Landolt ring optotype for non-clinical purposes) |
| BS EN ISO 8597-1996 |
視覺靈敏度檢驗字體.非醫院用有關驗光字體法 |
(Visual acuity test types - Method for correlating optotypes used for non-clinical purposes) |
| BS EN ISO 8598-1996 |
光學和光學儀器.焦距計 |
(Optics and optical instruments - Focimeters) |
| BS EN ISO 8599-1997 |
光學和光學儀器.接觸鏡片.光譜和光透射率的測定 |
(Optics and optical instruments - Contact lenses - Determination of the spectral and luminous transmittance) |
| BS EN ISO 8611-1-2004 |
物料運輸用托盤.平托盤.試驗方法 |
|
| BS EN ISO 8612-2001 |
眼科儀器.眼壓計 |
Ophthalmic instruments - Tonometers |
| BS EN ISO 8618-1998 |
塑料.液態酚醛樹脂.非揮發性物質的常規測定 |
Plastics - Liquid phenolic resins - Conventional determination of non-volatile matter |
| BS EN ISO 8619-1998 |
塑料.酚醛樹脂粉.在加熱玻璃板上流動距離的測定 |
Plastics - Phenolic resin powder - Determination of flow distance on a heated glass plate |
| BS EN ISO 8619-2005 |
塑料.酚醛樹脂粉.在加熱的玻璃板上流動距離的測定 |
|
| BS EN ISO 862-1991 |
表面活性劑.詞匯 |
(Glossary of terms for surface active agents) |
| BS EN ISO 8620-1996 |
塑料.酚醛樹脂粉.用空氣噴射的篩濾器械的篩分析 |
Plastics - Phenolic resin powder - Sieve analysis using air-jet sieve apparatus |
| BS EN ISO 8624-2002 |
眼科光學.眼鏡架.測量系統和術語 |
(Ophthalmic optics - Spectacle frames - Measuring system and terminology) |
| BS EN ISO 8655-1-2002 |
活塞運動的體積測量儀.術語、一般要求和使用推薦 |
(Piston-operated volumetric apparatus - Terminology, general requirements and user recommendations) |
| BS EN ISO 8655-2-2002 |
活塞運動的體積測量儀.活塞吸管 |
Piston-operated volumetric apparatus - Piston pipettes |
| BS EN ISO 8655-3-2002 |
活塞運動的體積測量儀.活塞滴定計 |
(Piston-operated volumetric apparatus - Piston burettes) |
| BS EN ISO 8655-4-2002 |
活塞運動的體積測量儀.稀釋計 |
(Piston-operated volumetric apparatus - Dilutors) |
| BS EN ISO 8655-5-2002 |
活塞運動的體積測量儀.分配器 |
(Piston-operated volumetric apparatus - Dispensers) |
| BS EN ISO 8655-6-2002 |
活塞運動的體積測量儀.測定測量誤差用稱重測量法 |
(Piston-operated volumetric apparatus - Gravimetric methods for the determination of measurement error) |
| BS EN ISO 8662-10-1998 |
便攜式手提動力工具.手柄振動測量.步?jīng)_輪廓機和剪切機械 |
(Hand-held portable power tools - Measurement of vibrations at the handle - Nibblers and shears) |
| BS EN ISO 8662-12-1997 |
便攜式手提動力工具.手柄振動測量.第12部分:有往復作用的鋸和銼和有擺動或旋轉作用的鋸 |
(Hand-held portable power tools - Measurement of vibrations at the handle - Saws and files with reciprocating action and saws with rotating or oscillating action) |
| BS EN ISO 8662-13-1997 |
便攜式手提動力工具.手柄振動測量.第13部分:模具研模機 |
Hand-held portable power tools - Measurement of vibrations at the handle - Die grinders |
| BS EN ISO 8662-14-1997 |
便攜式手提動力工具.手柄振動的測量.石工用工具和針式標定器 |
(Hand-held portable power tools - Measurement of vibrations at the handle - Stone-working tools and needle scalers) |
| BS EN ISO 8662-4-1995 |
便攜式手提動力工具.手柄振動的測量.第4部分:磨床 |
(Hand-held portable power tools - Measurement of vibrations at the handle - Grinding machines) |
| BS EN ISO 8662-6-1995 |
便攜式手提動力工具.手柄振動的測量.第6部分:沖擊式鉆機 |
(Hand-held portable power tools - Measurement of vibrations at the handle - Impact drills) |
| BS EN ISO 8662-7-1997 |
便攜式手提動力工具.手柄振動測量.第7部分:扳手,旋具與具有沖擊,沖力和刻踞齒作用的螺紋滾子 |
(Hand-held portable power tools - Measurement of vibrations at the handle - Wrenches, screwdrivers and nut runners with impact, impulse or ratchet action) |
| BS EN ISO 8662-8-1997 |
便攜式手提動力工具.手柄振動測量.第8部分:拋光和旋轉,軌道和隨機軌道砂輪機 |
(Hand-held portable power tools - Measurement of vibrations at the handle - Polishers and rotary, orbital and random orbital sanders) |
| BS EN ISO 8662-9-1997 |
便攜式手提動力工具.手柄振動的測量.夯錘 |
(Hand-held portable power tools - Measurement of vibrations at the handle - Rammers) |
| BS EN ISO 8665-1996 |
小型船舶.海船推進發動機和裝置.動力測量和說明 |
(Small craft - Marine propulsion engines and systems - Power measurements and declarations) |
| BS EN ISO 8666-2002 |
小型舶船.主要數據 |
Small craft - Principal data |
| BS EN ISO 8669-2-1997 |
尿收集袋.要求和試驗方法 |
Urine collection bags - Requirements and test methods |
| BS EN ISO 8670-2-1997 |
造口術收集袋.要求和試驗方法 |
(Ostomy collection bags - Requirements and test methods) |
| BS EN ISO 8673-2001 |
1型.六角頭螺母.米制細牙螺紋.產品等級A和B |
(Hexagon nuts, style 1, with metric fine pitch thread - Product grades A and B) |
| BS EN ISO 8674-2001 |
2型.六角頭螺母.米制細牙螺紋.產品等級A和B |
(Hexagon nuts, style 2, with metric fine pitch thread - Product grades A and B) |
| BS EN ISO 8675-2001 |
帶米制細牙螺紋的六角頭薄螺母.產品等級A和B |
(Hexagon thin nuts (chamfered) with metric fine pitch thread - Product grades A and B) |
| BS EN ISO 8676-2001 |
帶米制細牙螺紋的六角頭螺釘.產品等級A和B |
Hexagon head screws with metric fine pitch thread - Product grades A and B |
| BS EN ISO 868-1992 |
塑料和硬橡膠.用硬度計對缺刻硬度的測定 |
Plastics and ebonite - Determination of indentation hardness by means of a a durometer (Shore hardness) |
| BS EN ISO 868-2003 |
塑料和硬質橡膠.用硬度計測定壓痕硬度(肖氏硬度) |
(Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)) |
| BS EN ISO 8689-1-2000 |
水質.江河的生物分類.對海底微型無脊椎動物調查的生物質量數據的解釋指南 |
Water quality - Biological classification of rivers - Guidance on the interpretation of biological quality data from surveys of benthic macroinvertebrates |
| BS EN ISO 8689-2-2000 |
水質.江河的生物分類.對海底微型無脊椎動物調查的生物質量數據的表示指南 |
(Water quality - Biological classification of rivers - Guidance on the presentation of biological quality data from surveys of benthic macroinvertebrates) |
| BS EN ISO 8692-2004 |
水質.用單細胞綠海藻進行淡水藻類生長抑制性試驗 |
|
| BS EN ISO 8692-2004 |
水質.用單細胞綠海藻進行淡水藻類生長抑制性試驗 |
|
| BS EN ISO 8728-1999 |
船舶和航海技術.航海陀螺羅盤 |
(Ships and marine technology - Marine gyro-compasses) |
| BS EN ISO 8729-1999 |
船舶和航海技術.海上雷達反射器 |
(Ships and marine technology - Marine radar reflectors) |
| BS EN ISO 8733-1998 |
未淬硬鋼或奧氏體不銹鋼制有內螺紋的平行銷 |
Parallel pins with internal thread, of unhardened steel or austenitic stainless steel |
| BS EN ISO 8734-1998 |
淬硬鋼或馬氏體不銹鋼制平行銷(定位銷) |
(Parallel pins, of hardened steel or martensitic stainless steel (Dowel pins)) |
| BS EN ISO 8735-1998 |
淬硬鋼和馬氏體不銹鋼制帶內螺紋的平行銷 |
(Parallel pins with internal thread, of hardened steel or martensitic stainless steel) |
| BS EN ISO 8739-1998 |
帶槽銷.帶導向的全長直槽型銷 |
(Grooved pins - Full-length parallel grooved, with pilot) |
| BS EN ISO 8740-1998 |
帶槽銷.有倒角的全長直槽型銷 |
(Grooved pins - Full-length parallel grooved, with chamfer) |
| BS EN ISO 8741-1998 |
帶槽銷.半長倒錐槽型銷 |
(Grooved pins - Half-length reverse-taper grooved) |
| BS EN ISO 8742-1998 |
帶槽銷.中部三分之一長槽型銷 |
(Grooved pins - One-third-length centre grooved) |
| BS EN ISO 8743-1998 |
帶槽銷.中部半長槽型銷 |
(Grooved pins - Half-length centre grooved) |
| BS EN ISO 8744-1998 |
帶槽銷.全長錐槽型銷 |
(Grooved pins - Full-length taper grooved) |
| BS EN ISO 8745-1998 |
帶槽銷.半長錐槽型銷 |
(Grooved pins - Half-length taper grooved) |
| BS EN ISO 8746-1998 |
圓頭帶槽銷 |
Grooved pins with round head |
| BS EN ISO 8747-1998 |
沉頭帶槽銷 |
Grooved pins with countersunk head |
| BS EN ISO 8748-1998 |
彈簧型開口直銷.重載盤繞式 |
Spring-type straight pins - Coiled, heavy duty |
| BS EN ISO 8750-1998 |
彈簧型開口直銷.標準負荷盤繞式 |
Spring-type straight pins - Coiled, standard duty |
| BS EN ISO 8751-1998 |
彈簧型開口直銷.輕負荷盤繞式 |
(Spring-type straight pins - Coiled, light duty) |
| BS EN ISO 8752-1998 |
彈簧型開口直銷.重負荷槽頭式 |
Spring-type straight pins - Slotted, heavy duty |
| BS EN ISO 8754-1995 |
石油及其產品的試驗方法.石油產品.硫含量的測定.能量分散的X射線熒光法 |
Methods of test for petroleum and its products - Petroleum products - Determination of sulfur content - Energy-dispersive X-ray fluorescence method |
| BS EN ISO 8754-2003 |
石油產品.硫含量的測定.能量分散X射線熒光光譜測定法 |
(Petroleum products - Determination of sulfur content - Energy-dispersive X-ray fluorescence spectrometry) |
| BS EN ISO 8765-2001 |
帶米制細牙螺紋的六角頭螺栓.產品等級A和B |
Hexagon head bolts with metric fine pitch thread - Product grades A and B |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com