標準號 |
中文名稱 |
英文名稱 |
| DIN EN 12331-2004 |
食品加工機械.鉸肉機.安全和衛生要求 |
|
| DIN EN 12332-1-1998 |
用橡膠和塑料涂層的紡織物.破裂強度測定.第1部分:鋼球法 |
(Rubber or plastic coated fabrics - Determination of bursting strength - Part 1: Steel ball method; German version EN 12332-1:1998) |
| DIN EN 12332-2-2003 |
橡膠或塑料涂層織物.破裂強度測定.第2部分:液壓法 |
(Rubber- or plastic-coated fabrics - Determination of bursting strength - Part 2: Hydraulic method; German version EN 12332-2:2002) |
| DIN EN 12334-2001 |
工業閥門.鑄鐵控制閥門 |
(Industrial valves - Cast iron check valves; German version EN 12334:2001) |
| DIN EN 12334-2004 |
工業閥門.鑄鐵止回閥 |
|
| DIN EN 12337-1-2000 |
建筑物用玻璃.化學增強鈉鈣安全玻璃.第1部分:定義和描述 |
(Glass in building - Chemically strengthened soda lime silicate glass - Part 1: Definition and description; German version EN 12337-1:2000) |
| DIN EN 12337-2-2005 |
建筑物用玻璃.化學增強鈉鈣安全玻璃.第2部分:合格評價/產品標準 |
|
| DIN EN 12338-1998 |
水質.汞量測定.用汞齊化濃縮后的方法 |
(Water quality - Determination of mercury - Methods after enrichment by amalgamation; German version EN 12338:1998) |
| DIN EN 12339-1997 |
內河航運船舶.繩索套管 |
(Inland navigation vessels - Rope tubs; German version EN 12339:1997) |
| DIN EN 123400-1992 |
分規范.撓性無連續連接的印制電路板 |
(Sectional specification: flexible printed boards without through connections; german version EN 123400:1992) |
| DIN EN 123400-800-1992 |
用于合格認可的分規范.撓性無連續連接的印制電路板 |
(Capability detail specification: flexible printed boards without through connections; german version EN 123400-800:1992) |
| DIN EN 123400/A2-1996 |
分規范:非連續連接的柔性印制電路板 |
(Sectional specification: Flexible printed boards without through connections; German version EN 123400:1992/A2:1995) |
| DIN EN 12341-1999 |
空氣質量.懸浮塵埃中PM10系數答的測定.測量步驟和參照測量方法的等值驗證用參照法和野外檢驗法 |
(Air quality - Determination of the PM10 fraction of suspended particulate matter - Reference method and field test procedure to demonstrate reference equivalence of measurement methods; German version EN 12341:1998) |
| DIN EN 12342-1998 |
用于麻醉器和人工呼吸器的呼吸器 |
(Breathing tubes intended for use with anaesthetic apparatus and ventilators; German version EN 12342:1998) |
| DIN EN 12345-1999 |
焊接.帶圖形表示的焊接多語種名稱表. |
(Welding - Multilingual terms for welded joints with illustrations; Trilingual version EN 12345:1998) |
| DIN EN 12346-1998 |
體操器械.肋木,格子梯,攀登架.安全技術要求和檢驗方法 |
(Gymnastic equipment - Wall bars, lattice ladders and climbing frames - Safety requirements and test methods; German version EN 12346:1998) |
| DIN EN 12347-1998 |
生物技術.蒸氣消毒器和高壓釜用性能標準 |
(Biotechnology - Performance criteria for steam sterilizers and autoclaves; German version EN 12347:1998) |
| DIN EN 12348-2000 |
立式巖心鉆機.安全 |
(Core drilling machines on stand - Safety; German version EN 12348:2000) |
| DIN EN 1235-1995 |
固體肥料.篩分試驗 |
(Solid fertilizers - Test sieving (ISO 8397:1988, modified); German version EN 1235:1995) |
| DIN EN 1235-2003 |
固體肥料.篩分試驗 |
(Solid fertilizers - Test sieving (ISO 8397:1988, modified) (including Amendment A1:2003); German version EN 1235:1995 + A1:2003) |
| DIN EN 12350-1-2000 |
試驗用新澆混凝土.第1部分:取樣 |
(Testing fresh concrete - Part 1: Sampling; German version EN 12350-1:1999) |
| DIN EN 12350-2-2000 |
試驗用新澆混凝土.第2部分:蹋落度試驗 |
(Testing fresh concrete - Part 2: Slump test; German version EN 12350-2:1999) |
| DIN EN 12350-3-2000 |
試驗新澆混凝土.第3部分:貝式振動稠度試驗;德文版本EN12350-3:1999 |
(Testing fresh concrete - Part 3: Vebe test; German version EN 12350-3:1999) |
| DIN EN 12350-4-2000 |
試驗用新澆混凝土.第4部分:密實度等級 |
(Testing fresh concrete - Part 4: Degree of compactability; German version EN 12350-4:1999) |
| DIN EN 12350-5-2000 |
試驗用新澆混凝土.第5部分:流動試驗臺試驗 |
(Testing fresh concrete - Part 5: Flow table test; German version EN 12350-5:1999) |
| DIN EN 12350-6-2000 |
試驗用新澆混凝土.第6部分:密度試驗 |
(Testing fresh concrete - Part 6: Density; German version EN 12350-6:1999) |
| DIN EN 12350-7-2000 |
新澆混凝土試驗.第7部分:空氣含量.壓力法 |
(Testing fresh concrete - Part 7: Air content; Pressure methods; German version EN 12350-7:2000) |
| DIN EN 123500-1992 |
分規范.撓性帶連續連接的印制電路板 |
(Sectional specification: flexible printed boards with through connections; german version EN 123500:1992) |
| DIN EN 123500-800-1992 |
用于合格認可的分規范.撓性帶連續連接的印制電路板 |
(Capability detail specification: flexible printed boards with through connections; german version EN 123500-800:1992) |
| DIN EN 123500/A2-1996 |
分規范:連續連接的柔性印制電路板 |
(Sectional specification: Flexible printed boards with through connections; German version EN 123500:1992/A2:1995) |
| DIN EN 12351-1999 |
工業閥門.帶法蘭聯接的閥門用護罩.德文標準12351:1999 |
(Industrial valves - Protective caps for valves with flanged connections; German version EN 12351:1999) |
| DIN EN 12352-2000 |
交通管制設備.警告和安全燈裝置 |
(Traffic control equipment - Warning and safety light devices; German version EN 12352:2000) |
| DIN EN 12353-2000 |
化學消毒劑和防腐變劑.殺菌活性測定用微生物株的保存 |
(Chemical disinfectants and antiseptics - Preservation of microbial strains used for the determination of bactericidal and fungicidal activity; German version EN 12353:1999) |
| DIN EN 12354-1-2000 |
建筑聲學.從件性能評定建筑物的聲學性能.第1部分:房間之間對氣載聲音的隔決 |
(Building acoustics - Estimation of acoustic performance of buildings from the performance of products - Part 1: Airborne sound insulation between rooms; German version EN 12354-1:2000) |
| DIN EN 12354-2-2000 |
建筑聲學.從件性能評定建筑物的聲學性能.第2部分:房間之間對沖擊聲音的隔決 |
(Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 2: Impact sound insulation between rooms; German version EN 12354-2:2000) |
| DIN EN 12354-3-2000 |
建筑聲學.從件性能評定建筑物的聲學性能.第3部分:對室外氣載聲音的隔決 |
(Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 3: Airborne sound insulation against outdoor sound; German version EN 12354-3:2000) |
| DIN EN 12354-4-2001 |
建筑聲學.從件性能評定建筑物的聲學性能.第4部分:室內到室外的聲音傳遞 |
(Building acoustics - Estimation of acoustic performance of buildings from the performance of products - Part 4: Transmission of indoor sound to the outside; German version EN 12354-4:2000) |
| DIN EN 12354-6-2004 |
建筑聲學.從件性能評估建筑物的聲學性能.第6部分:封閉空間的聲音吸收 |
|
| DIN EN 12355-2003 |
食品加工機械.去皮機和去膜機.安全和衛生要求 |
(Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements; German version EN 12355:2003) |
| DIN EN 1236-1995 |
肥料.容積(松)密度的測定 |
(Fertilizers - Determination of bulk density (loose) (ISO 3944:1992 modified); German version EN 1236:1995) |
| DIN EN 123600-1997 |
分規范.帶貫通連接的彎曲剛性多層印制電路板 |
(Sectional specification - Flex-rigid multilayer printed boards with through connections; German version EN 123600:1996) |
| DIN EN 12368-2000 |
交通控制設備.信號器 |
(Traffic control equipment - Signal heads; German version EN 12368:2000) |
| DIN EN 12369-1-2001 |
木板.結構設計用特征值.第1部分:OSB.碎料板和纖維板 |
(Wood-based panels - Characteristic values for structural design - Part 1: OSB, particleboards and fibreboards; German version EN 12369-1:2001) |
| DIN EN 12369-2-2004 |
木板.結構設計用特征值.第2部分:膠合板 |
|
| DIN EN 1237-1995 |
肥料.容積(輕拍)密度測定 |
(Fertilizers - Determination of bulk density (tapped) (ISO 5311:1992 modified); German version EN 1237:1995) |
| DIN EN 12370-1999 |
天然石料的檢驗方法.抗鹽結晶性能的測定 |
(Natural stone test methods - Determination of resistance to salt crystallisation; German version EN 12370:1999) |
| DIN EN 123700-1997 |
分規范.帶貫通連接的彎曲剛性雙面印制電路板 |
(Sectional specification - Flex-rigid double sided printed boards with through connections; German version EN 123700:1996) |
| DIN EN 12371-2002 |
天然石料試驗方法.抗凍性 |
(Natural stone test methods - Determination of frost resistance; German version EN 12371:2001) |
| DIN EN 12372 Berichtigung 1-2003 |
DINEN12372-1999的勘誤 |
(Corrigenda to DIN EN 12372:1999-06 (EN 12372:1999/AC:2002)) |
| DIN EN 12372-1999 |
天然石料的檢驗方法.集中負荷下抗彎強度的測定 |
(Natural stone test methods - Determination of flexural strength under concentrated load; German version EN 12372:1999) |
| DIN EN 12373-1-2001 |
鋁及鋁合金.陽極氧化.第1部分:鋁上裝飾和保護用陽極氧化覆層的規定方法 |
(Aluminium and aluminium alloys - Anodizing - Part 1: Method for specifying decorative and protective anodic oxidation coatings on aluminium; German version EN 12373-1:2001) |
| DIN EN 12373-10-1999 |
鋁和鋁合金.陽極處理.第10部分:用磨料噴射試驗儀進行耐蘑試驗測量陽極產生的氧化層的平均特殊耐磨性 |
(Aluminium and aluminium alloys - Anodizing - Part 10: Measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatus; German version EN 12373-10:1998) |
| DIN EN 12373-11-2000 |
鋁及鋁合金.陽極處理.第11部分:20、45、60或85角陽極氧化鍍層的鏡面反射系數和鏡面光澤度測量 |
(Aluminium and aluminium alloys - Anodizing - Part 11: Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20? 45? 60?or 85? German version EN 12373-11:2000) |
| DIN EN 12373-12-2000 |
鋁及鋁合金.陽極處理.第12部分:使用積算球儀器測量鋁表面的反射特性 |
(Aluminium and aluminium alloys - Anodizing - Part 12: Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments; German version EN 12373-12:2000) |
| DIN EN 12373-13-2000 |
鋁及鋁合金.陽極處理.第13部分:使用測角光度計或濾光測角光度計測量鋁表面的反射特性 |
(Aluminium and aluminium alloys - Anodizing - Part 13: Measurement for reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer; German version EN 12373-13:2000) |
| DIN EN 12373-14-2000 |
鋁及鋁合金.陽極處理.第14部分:陽極氧化覆層圖像清晰度的目視識別.圖表比例尺法 |
(Aluminium and aluminium alloys - Anodizing - Part 14: Visual determination of image clarity of anodic oxidation coatings; Chart scale method; German version EN 12373-14:2000) |
| DIN EN 12373-15-2000 |
鋁及鋁合金.陽極處理.第15部分:陽極氧化覆層耐變形裂開的評定 |
(Aluminium and aluminium alloys - Anodizing - Part 15: Assessment of resistance of anodic oxidation coatings to cracking by deformation; German version EN 12373-15:2000) |
| DIN EN 12373-16-2001 |
鋁及鋁合金.陽極氧化.第16部分:陽極氧化薄覆層連續性檢查.硫酸銅試驗 |
(Aluminium and aluminium alloys - Anodizing - Part 16: Check for continuity of thin anodic oxidation coatings Copper sulfate test; German version EN 12373-16:2001) |
| DIN EN 12373-17-2001 |
鋁及鋁合金.陽極氧化.第17部分:電介質擊穿潛能的測定 |
(Aluminium and aluminium alloys - Anodizing - Part 17: Determination of electric breakdown potential; German version EN 12373-17:2001) |
| DIN EN 12373-18-2001 |
鋁及鋁合金.陽極氧化.第18部分:斑蝕評定的等級系統.圖表法 |
(Aluminium and aluminium alloys - Anodizing - Part 18: Rating system for the evaluation of pitting corrosion; Chart method; German version EN 12373-18:2001) |
| DIN EN 12373-19-2001 |
鋁及鋁合金.陽極氧化.第19部分:斑蝕評定的等級系統.格柵法 |
(Aluminium and aluminium alloys - Anodizing - Part 19: Rating system for the evaluation of pitting corrosion; Grid method; German version EN 12373-19:2001) |
| DIN EN 12373-2-1999 |
鋁和鋁合金.陽極處理.第2部分:陽極處理產生的氧化層中單位面積質量(與面積相關的質量)的測定.重力法 |
(Aluminium and aluminium alloys - Anodizing - Part 2: Determination of mass par unit area (surface density) of anodic oxidation coatings - Gravimetric method; German version EN 12373-2:1998) |
| DIN EN 12373-3-1999 |
鋁和鋁合金.陽極處理.第3部分:陽極處理產生的氧化層厚度的測定.用光截面顯微鏡作無損測量 |
(Aluminium and aluminium alloys - Anodizing - Part 3: Determination of thickness of anodic oxidation coatings; non-destructive measurement by split-beam-microscope; German version EN 12373-3:1998) |
| DIN EN 12373-4-1999 |
鋁和鋁合金.陽極處理.第4部分:通過用預先酸處理的著色滴落試驗密封后進行陽極處理產生的氧化層的可著色性的 |
(Aluminium and aluminium alloys - Anodizing - Part 4: Estimation of loss of absorptive power of anodic oxidation coatings after sealing by dye spot test with prior acid treatment; German version EN 12373-4:1998) |
| DIN EN 12373-5-1999 |
鋁和鋁合金.陽極處理.第5部分:通過測定視在導納檢驗密封的陽極處理產生的氧化層的質量 |
(Aluminium and aluminium alloys - Anodizing - Part 5: Assessment of quality of sealed anodic oxidation coatings by measurement of admittance; German version EN 12373-5:1998) |
| DIN EN 12373-6-1999 |
鋁和鋁合金.陽極處理.第6部分:在預先沒有進行酸處理的鉻磷酸溶液中浸漬以后通過測定質量損耗檢驗密封的陽極 |
(Aluminium and aluminium alloys - Anodizing - Part 6: Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution without prior acid treatment; German version EN 123 |
| DIN EN 12373-7-2002 |
鋁及鋁合金.陽極氧化.第7部分:通過磷酸和鉻酸溶液浸漬酸處理后測量質量損失評定密封陽極氧化覆層的質量 |
(Aluminium and aluminium alloys - Anodizing - Part 7: Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution with prior acid treatment; German version EN 12373- |
| DIN EN 12373-8-1999 |
鋁和鋁合金.陽極處理.第8部分:著色的陽極氧化處理產生的氧化層耐紫外線性能的比較測定 |
(Aluminium and aluminium alloys - Anodizing - Part 8: Determination of the comparative fastness to ultra-violet light and heat of coloured anodic oxidation coatings; German version EN 12373-8:1998) |
| DIN EN 12373-9-1999 |
鋁和鋁合金.陽極處理.第9部分:通過用砂輪試驗儀的磨損檢驗測量陽極處理產生的氧化層的抗磨損性和磨損數 |
(Aluminium and aluminium alloys - Anodizing - Part 9: Measurement of wear resistance and wear index of anodic oxidation coatings using an abrasive wheel wear test apparatus; German version EN 12373-9:1998) |
| DIN EN 12374-1998 |
包裝材料.管.專業術語 |
(Packaging - Flexible tubes - Terminology; German version EN 12374:1998) |
| DIN EN 12375-1998 |
包裝材料.鋁軟管.管壁厚的測定 |
(Packaging - Flexible aluminium tubes - Wall thickness determination method; German version EN 12375:1998) |
| DIN EN 12376-1999 |
實驗室診斷醫療設備.生物著色用實驗室診斷試劑生產廠商提供的信息 |
(In vitro diagnostic medical devices - Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology; German version EN 12376:1999) |
| DIN EN 12377-1998 |
包裝材料.管道.閉鎖氣密性測定用檢驗方法 |
(Packaging - Flexible tubes - Test method for the air tightness of closures; German version EN 12377:1998) |
| DIN EN 1238-1999 |
膠粘劑.熱塑膠粘劑(圓型和球型)軟化點的測定 |
(Adhesives - Determination of the softening point of thermoplastic adhesives (ring and ball); German version EN 1238:1999) |
| DIN EN 12380-2003 |
排水系統用通氣閥.要求、試驗方法和合格評定 |
(Air admittance valves for drainage systems - Requirements, test methods and evaluation of conformity; German version EN 12380:2002) |
| DIN EN 123800-1997 |
分規范.帶貫通連接的撓性多層印制電路板 |
(Sectional specification - Flexible multilayer printed boards with through connection; German version EN 123800:1996) |
| DIN EN 12384-1999 |
銅和銅合金.帶材彈簧彎曲極限的測定 |
(Copper and copper alloys - Determination of spring bending limit on strip; German version EN 12384:1999) |
| DIN EN 12385-1-2003 |
鋼絲繩.安全性.第1部分:一般要求 |
(Steel wire ropes - Safety - Part 1: General requirements; German version EN 12385-1:2002) |
| DIN EN 12385-10-2004 |
鋼絲繩.安全.第10部分:一般結構用的螺旋繩 |
|
| DIN EN 12385-2-2003 |
鋼絲繩.安全.第2部分:定義、命名和分類 |
(Steel wire ropes - Safety - Part 2: Definitions, designation and classification; German version EN 12385-2:2002) |
| DIN EN 12385-3-2004 |
鋼絲繩.安全.第3部分:使用和維護的信息 |
|
| DIN EN 12385-4-2003 |
鋼絲繩.安全.第4部分:一般提升裝置用股絞繩 |
(Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applications; German version EN 12385-4:2002) |
| DIN EN 12385-6-2004 |
鋼絲繩.安全性.第6部分:礦井用標準繩 |
|
| DIN EN 12385-7-2003 |
鋼絲繩.安全.第7部分:礦井用鎖絲鋼絲繩 |
(Steel wire ropes - Safety - Part 7: Locked coil ropes for mine shafts; German version EN 12385-7:2002) |
| DIN EN 12385-8-2003 |
鋼絲繩.安全.第8部分:升降機用股絞繩 |
(Steel wire ropes - Safety - Part 8: Stranded hauling and carrying-hauling ropes for cableway installations designed to carry persons; German version EN 12385-8:2002) |
| DIN EN 12385-9-2003 |
鋼絲繩.安全.第9部分:為載人設計用索道設備的鎖環鋼絲繩 |
(Steel wire ropes - Safety - Part 9: Locked coil carrying ropes for cableway installations designed to carry persons; German version EN 12385-9:2002) |
| DIN EN 12386-1999 |
飲用水制備用化合物.硫酸銅 |
(Chemicals used for treatment of water intended for human consumption - Copper sulfate; German version EN 12386:1998) |
| DIN EN 12386-2005 |
人類生活用水處理用化學品.硫酸銅 |
|
| DIN EN 1239-1998 |
膠粘劑.凍熔穩定性 |
(Adhesives - Freeze-thaw stability; German version EN 1239:1998) |
| DIN EN 12390-1-2001 |
硬化混凝土試驗.第1部分:樣品和模型的形狀、尺寸和其他要求 |
(Testing hardened concrete - Part 1: Shape, dimensions and other requirements for specimens and moulds; German version EN 12390-1:2000) |
| DIN EN 12390-2-2001 |
硬化混凝土試驗.第2部分:強度試驗用的試樣的形成和處理 |
(Testing hardened concrete - Part 2: Making and curing specimens for strength tests; German version EN 12390-2:2000) |
| DIN EN 12390-3-2002 |
硬化混凝土試驗.第3部分:試樣的壓縮強度 |
(Testing hardened concrete - Part 3: Compressive strength of test specimens; German version EN 12390-3:2001) |
| DIN EN 12390-4-2000 |
硬化混凝土試驗.第4部分:壓縮強度.試驗機規范 |
(Testing hardened concrete - Part 4: Compressive strength; Specification for testing machines; German version EN 12390-4:2000) |
| DIN EN 12390-5-2001 |
硬化混凝土試驗.第5部分:試樣的結構強度 |
(Testing hardened concrete - Part 5: Textural strength of test specimens; German version EN 12390-5:2000) |
| DIN EN 12390-6-2001 |
硬化混凝土試驗.第6部分:試樣的劈裂拉伸強度 |
(Testing hardened concrete - Part 6: Tensile splitting strength of test specimens; German version EN 12390-6:2000) |
| DIN EN 12390-7-2001 |
硬化混凝土試驗.第7部分:硬化混凝土的密度 |
(Testing hardened concrete - Part 7: Density of hardened concrete; German version EN 12390-7:2000) |
| DIN EN 12390-8-2001 |
硬化混凝土試驗.第8部分:加壓條件下水的滲透深度 |
(Testing hardened concrete - Part 8: Depth of penetration of water under pressure; German version EN 12390-8:2000) |
| DIN EN 12391-1-2004 |
煙囪.金屬煙囪用執行標準.第1部分:非室內密封的加熱設備用煙囪 |
|
| DIN EN 12392-2000 |
鋁和鋁合金.鍛造產品.用于壓力設備生產的產品的特殊要求 |
(Aluminium and aluminium alloys - Wrought products - Special requirements for products intended for the production of pressure equipment; German version EN 12392:2000) |
| DIN EN 12393-1-1998 |
清淡食品.農藥殘流物氣相色譜測定用多種殘留法.第1部分:概述 |
(Non-fatty foods - Multiresidue methods for the gas chromatographic determination of pesticide residues - Part 1: General considerations; German version EN 12393-1:1998) |
| DIN EN 12393-2-1998 |
清淡食品.農藥殘流物氣相色譜測定用多種殘留法.第2部分:萃取和凈化的方法 |
(Non-fatty foods - Multiresidue methods for the gas chromatographic determination of pesticide residues - Part 2: Methods for extraction and clean-up; German version EN 12393-2:1998) |
| DIN EN 12393-3-1998 |
清淡食品.農藥殘流物氣相色譜測定用多種殘留法.第2部分:測定和保障的方法 |
(Non-fatty foods - Multiresidue methods for the gas chromatographic determination of pesticide residues - Part 3: Determination and confirmatory tests; Version allemande EN 12393-3:1998) |
| DIN EN 12396-1-1998 |
清淡食品.二硫化基甲酸鹽和二硫化四烷基秋蘭姆殘流物的測定.第1部分:分光光度法 |
(Non-fatty foods - Determination of dithiocarbamate and thiuram disulfide residues - Part 1: Spectrometric method; German version EN 12396-1:1998) |
| DIN EN 12396-2-1998 |
清淡食品.二硫化基甲酸鹽和二硫化四烷基秋蘭姆殘流物的測定.第2部分:色相氣譜法 |
(Non-fatty foods - Determination of dithiocarbamate and thiuram disulfide residues - Part 2: Gas chromatographic method; German version EN 12396-2:1998) |
| DIN EN 12396-3-2000 |
清淡食品.二硫化基甲酸鹽和二硫化四烷基秋蘭姆殘留物的測定.第3部分:紫外分光光度法 |
(Non-fatty foods - Determination of dithiocarbamate and thiuram disulfide residues - Part 3: UV-spectrometric xanthogenate method; German version EN 12396-3:2000) |
| DIN EN 12397-2005 |
載人用索道裝置的安全要求.操作 |
|
| DIN EN 124-1994 |
排水設備的排水溝蓋和人孔蓋.結構原理.檢驗.標志.質量監督 |
(Gully tops and manhole tops for vehicular and pedestrian areas - Design requirements, testing, marking, quality control; German version EN 124:1994) |
| DIN EN 1240-1998 |
膠粘劑.羥基值和/或羥基含量的測定 |
(Adhesives - Determination of hydroxyl value and/or hydroxyl content; German version EN 1240:1998) |
| DIN EN 12400-2003 |
窗戶和人行門.機械耐久性.要求和分類 |
(Windows and pedestrian doors - Mechanical durability - Requirements and classification; German version EN 12400:2002) |
| DIN EN 12402-1999 |
鉛和鉛合金.分析取樣方法 |
(Lead and lead alloys - Methods of sampling for analysis; German version EN 12402:1999) |
| DIN EN 12403-1998 |
條碼.結構數據組 |
(Bar coding - Structured data files; German version EN 12403:1998) |
| DIN EN 12406-1999 |
交換容器.C級熱交換容器.尺寸和一般要求 |
(Swap bodies - Thermal swap bodies of class C - Dimensions and general requirements; German version EN 12406:1999) |
| DIN EN 12407-2000 |
天然石料試驗方法.巖石檢驗 |
(Natural stone test methods - Petrographic examination; German version EN 12407:2000) |
| DIN EN 12408-2005 |
載人員用索道裝置的安全要求.質量控制 |
|
| DIN EN 12409-1999 |
橡膠和塑料機械.熱成形機械.安全要求 |
(Rubber and plastics machines - Thermoforming machines - Safety requirements; German version EN 12409:1999) |
| DIN EN 1241-1998 |
膠粘劑.酸值測定 |
(Adhesives - Determination of acid value; German version EN 1241:1998) |
| DIN EN 12410-1999 |
交換容器.A級熱交換容器.尺寸和一般要求 |
(Swap bodies - Thermal swap bodies of class A - Dimensions and general requirements; German version EN 12410:1999) |
| DIN EN 12413-1999 |
化合磨料制磨具的安全性要求 |
(Safety requirements for bonded abrasive products; German version EN 12413:1999) |
| DIN EN 12414-2000 |
車輛停車控制設備.付款和售票機 |
(Vehicle parking control equipment - Pay and display ticket machine - Technical and functional requirements; German version EN 12414:1999) |
| DIN EN 12415-2003 |
機床的安全.小型數控車床和車床頂尖 |
(Safety of machine tools - Small numerically controlled turning machines and turning centres (includes Amendment A1:2002); German version EN 12415:2000 + A1:2002) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com