標準號 |
中文名稱 |
英文名稱 |
| DIN EN 61191-1-1999 |
印刷電路板組件.第1部分:總規范.使用表面安裝和相關裝配技術的焊接電氣和電子組件的要求 |
(Printed board assemblies - Part 1: Generic specification. Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies (IEC 61191-1:1998); German version EN 61191-1:1998) |
| DIN EN 61191-2-1999 |
印刷電路板組件.第2部分:分規范.表面安裝焊接組件的要求 |
(Printed board assemblies - Part 2: Sectional specification: Requirements for surface mount soldered assemblies (IEC 61191-2:1998); German version EN 61191-2:1998) |
| DIN EN 61191-3-1999 |
印刷電路板組件.第3部分:分規范.通孔安裝焊接組件的要求 |
(Printed board assemblies - Part 3: Sectional specification: Requirements for through-hole mount soldered assemblies (IEC 61191-3:1998); German version EN 61191-3:1998) |
| DIN EN 61191-4-1999 |
印刷電路板組件.第4部分:分規范.端點焊接組件的要求 |
(Printed board assemblies - Part 4: Sectional specification: Requirements for terminal soldered assemblies (IEC 61191-4:1998); German version EN 61191-4:1998) |
| DIN EN 61192-3-2003 |
釬焊電子組件的工藝要求.第3部分:通孔安裝組件 |
(Workmanship requirements for soldered electric assemblies - Part 3: Through-hole mount assemblies (IEC 61192-3:2002); German version EN 61192-3:2003) |
| DIN EN 61193-1-2002 |
質量評定體系.第1部分:印制板組件缺陷注冊和分析 |
(Quality assessment systems - Part 1: Registration and analysis of defects on printed board assemblies (IEC 61193-1:2001); German version EN 61193-1:2002) |
| DIN EN 61194-1996 |
獨立式光生伏打系統的特征參數 |
(Characteristic parameters of stand-alone photovoltaic(PV) systems (IEC 61194:1992, modified); German version EN 61194:1995) |
| DIN EN 61195-2000 |
雙頭熒光燈的安全規范 |
(Double-capped fluorescent lamps - Safety specifications (IEC 61195:1999); German version EN 61195:1999) |
| DIN EN 61196-2-1995 |
高頻電纜規范.第2部分:聚四氟乙烯絕緣的半剛性高頻電纜和同軸電纜.分規范 |
(Radio-frequency cables - Specifications - Part 2: Semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation - Sectional specification (IEC 61196-2:1993); German version EN 61196-2:1995) |
| DIN EN 61196-2-2004 |
射頻電纜.第2部分:聚四氟乙烯絕緣的半剛性射頻電纜和同軸電纜分規范 |
|
| DIN EN 61196-3-1999 |
高頻電纜.第3部分:局域網用同軸電纜的分規范 |
(Radio frequency cables - Part 3: Sectional specification for coaxial cables for local area networks (IEC 61196-3:1998); German version EN 61196-3:1998) |
| DIN EN 61196-3-2-1998 |
高頻電纜規范.第3-2部分:平面層布線數字通訊用同軸電纜.第2節:有效半徑達到185m,速率在10Mb/s以下的局域網 |
(Radio frequency cables - Part 3-2: Coaxial cables for digital communication in horizontal floor wiring; detail specification for coaxial cables with solid dielectric for local area networks of 185 m reach and up to 10 Mb/s (IEC 61196-3-2:1997); German ve |
| DIN EN 61196-3-3-1998 |
高頻電纜規范.第3部分:平面層布線數字通訊用同軸電纜.第3節:有效半徑達到185m速率在10Mb/s(包括10Mb/s)的局 |
(Radio frequency cables - Part 3-3: Coaxial cables for digital communication in horizontal floor wiring; Detail specification for coaxial cables with foamed dielectric for local area networks of 185 m reach and up to 10 Mb/s (IEC 61196-3-3:1997); German v |
| DIN EN 61196-4-2004 |
同軸通信電纜.第4部分:輻射電纜的分規范 |
|
| DIN EN 61197-1996 |
絕緣油.火焰線性傳播.使用玻璃纖維的試驗方法 |
(Insulating liquids - Linear flame propagation - Test methods using a glass-fibre tape (IEC 61197:1993); German version EN 61197:1994) |
| DIN EN 61198-1995 |
絕緣礦物油.糖醛和有關化合物的測定檢驗方法 |
(Mineral insulating oils - Methods for the determination of 2-furfurol and related compounds (IEC 61198:1993); German version EN 61198:1994) |
| DIN EN 61199-2000 |
單頭熒光燈.安全規范 |
(Single-capped fluorescent lamps - Safety specifications (IEC 61199:1999); German version EN 61199:1999) |
| DIN EN 612-1996 |
金屬薄板制懸吊檐槽和雨水下落管.概念,分類和要求 |
(Eaves gutters and rainwater down-pipes of metal sheet - Definitions, classification and requirements; German version EN 612:1996) |
| DIN EN 61202-1-2001 |
纖維光絕緣子.第1部分:一般規范 |
(Fibre optic isolators - Part 1: Generic specification (IEC 61202-1:2000); German version EN 61202-1:2000) |
| DIN EN 61203-1995 |
電工用合成有機酯.設備中變壓器酯的維護指南 |
(Synthetic organic esters for electrical purposes - Guide for maintenance of transformer esters in equipment (IEC 61203:1992); German version EN 61203:1994) |
| DIN EN 61204-2001 |
直流輸出低壓供電裝置.性能特征 |
(Low-voltage power supply devices, d.c. output - Performance characteristics (IEC 61204:1993, modified + A1:2001); German version EN 61204:1995 + A1:2001) |
| DIN EN 61204-3 Berichtigung 1-2004 |
DIN EN 61204-3-2001的技術勘誤 |
|
| DIN EN 61204-3-2001 |
直流輸出低壓供電裝置.第3部分:電磁兼容性(EMC) |
(Low-voltage power supplies DC output - Part 3: Electromagnetic compatibility (EMC) (IEC 61204-3:2000); German version EN 61204-3:2000) |
| DIN EN 61204-6-2001 |
直流輸出低壓供電裝置.第6部分:經過性能評定的低壓供電裝置的要求 |
(Low-voltage power supplies, DC output - Part 6: Requirements for low-voltage power supplies of assessed performance (IEC 61204-6:2000); German version EN 61204-6:2001) |
| DIN EN 61205-1995 |
超聲學.牙齒除垢裝置.產品性能說明及測試 |
(Ultrasonics - Dental descaler systems - Measurement and declaration of the output characteristics (IEC 61205:1993); German version EN 61205:1994) |
| DIN EN 61207-1-1995 |
氣體分析器的性能說明.第1部分:概述 |
(Expression of performance of gas analyzers - Part 1: General (IEC 61207-1:1994); German version EN 61207-1:1994) |
| DIN EN 61207-2-1995 |
氣體分析器的性能說明.第2部分:氣體中的氧(利用高溫電化檢測器) |
(Expression of performance of gas analyzers - Part 2: Oxygen in gas (utilizing high-temperature electrochemical sensors) (IEC 61207-2:1994); German version EN 61207-2:1994) |
| DIN EN 61207-3 Berichtigung 1-2003 |
DINEN61207-3-2002的勘誤 |
(Corrigenda to DIN EN 61207-3:2002-11) |
| DIN EN 61207-3-2002 |
氣體分析儀.性能說明.第3部分:順磁氧氣分析儀 |
(Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers (IEC 61207-3:2002); German version EN 61207-3:2002) |
| DIN EN 61207-6-1995 |
氣體分析儀的性能說明.第6部分:光度分析儀 |
(Expression of performance of gas analyzers - Part 6: Photometric analyzers (IEC 61207-6:1994); German version EN 61207-6:1994) |
| DIN EN 61209-2000 |
海上導航和無線電通訊設備和系統.集成橋系統(IBS).操作、性能要求、試驗方法和要求的試驗結果 |
(Maritime navigation and radiocommunication equipment and systems - Integrated Bridge Systems (IBS) - Operational and performance requirements, methods of testing and required test results (IEC 61209:1999); German version EN 61209:1999) |
| DIN EN 61210-1995 |
連接裝置.銅電導體的扁型速接終端的安全要求 |
(Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements (IEC 61210:1993, modified); German version EN 61210:1995) |
| DIN EN 61211-2005 |
標稱電壓1000V以上的架空線用陶瓷材料或玻璃絕緣子.空氣中脈沖擊穿試驗 |
|
| DIN EN 61212-1 Bb.1-1996 |
電工用工業剛性熱固樹脂層壓圓管和棒材.型號比較 |
(Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Comparision of types) |
| DIN EN 61212-1-1996 |
電工用工業剛性熱固樹脂層壓圓管和棒材.第1部分:一般要求 |
(Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 1: General requirements (IEC 61212-1:1995); German version EN 61212-1:1995) |
| DIN EN 61212-2-1996 |
電工用工業剛性熱固樹脂層壓圓管和棒材.第2部分:檢驗方法 |
(Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 2: Methods of test (IEC 61212-2:1995); German version EN 61212-2:1996) |
| DIN EN 61212-3-1-1996 |
電工用工業剛性熱固樹脂層壓圓管和棒材.第3部分:個別材料的規范.第1節:圓型疊層卷繞管 |
(Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials; Sheet 1: Round laminated rolled tubes (IEC 61212-3-1:1995); German version EN 61212-3-1:1995) |
| DIN EN 61212-3-2-1996 |
電工用工業剛性熱固樹脂層壓圓管和棒材.第3部分:個別材料的規范.第2節:圓型模壓管 |
(Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials; Sheet 2: Round laminated moulded tubes (IEC 61212-3-2:1995); German version EN 61212-3-2:1995) |
| DIN EN 61212-3-3-1996 |
電工用工業剛性熱固樹脂層壓圓管和棒材.第3部分:個別材料的規范.第3節:圓型模壓棒 |
(Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials; Sheet 3: Round laminated moulded rods (IEC 61212-3-3:1995); German version EN 61212-3-3:1995) |
| DIN EN 61213-1994 |
錄像帶上模擬聲音錄制.磁化極性 |
(Analogue audio recording on video tape; polarity of magnetization (IEC 61213:1993); German version EN 61213:1994) |
| DIN EN 61215-1996 |
晶體硅地表光伏電池(PV)組件.設計質量和型號認可 |
(Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval (IEC 61215:1993); German version EN 61215:1995) |
| DIN EN 61217-1998 |
放射治療設備.坐標系,移動和標度 |
(Radiotherapy equipment - Coordinates, movements and scales (IEC 61217:1996); German version EN 61217:1996) |
| DIN EN 61217-2003 |
放射治療設備.坐標系、移動和標度 |
(Radiotherapy equipment - Coordinates, movements and scales (IEC 61217:1996 + A1:2000); German version EN 61217:1996 + A1:2001) |
| DIN EN 61219-1995 |
帶電作業.噴槍式短路裝置用的接地設備或接地輿短路設備 |
(Live working - Earthing or earthing and short-circuiting equipment using lances as a short-circuiting device - Lance earthing (IEC 61219:1993); German version EN 61219:1993) |
| DIN EN 61221-1996 |
礦物油產品和潤滑劑.三芳基-磷酸脂-渦輪機控制液體(類別ISO-L-TCD).要求 |
(Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (categorie ISO-L-TCD) - Specifications (IEC 61221:1993); German version EN 61221:1995) |
| DIN EN 61223-2-5-2004 |
醫用成像部門的評價及例行試驗.第2-5部分:穩定性試驗.圖像顯示裝置 |
|
| DIN EN 61223-2-6-1997 |
醫療X光放射科的評定和定期檢驗.第2-6部分:穩定性檢驗.計算機斷層攝影用X光設備 |
(Evaluation and routine testing in medical imaging departments - Part 2-6: Constancy tests; X-ray equipment for computed tomography (IEC 61223-2-6:1994); German version EN 61223-2-6:1994) |
| DIN EN 61223-3-1-2001 |
醫院成像科中的評定和常規試驗.第3-1部分::驗收試驗.輻射照相和輻射顯微照相系統用X射線設備的成像性能 |
(Evaluation and routine testing in medical imaging departments - Part 3-1: Acceptance tests; Imaging performance of X-ray equipment for radiographic and radioscopic systems (IEC 61223-3-1:1999); German version EN 61223-3-1:1999) |
| DIN EN 61223-3-2-2001 |
醫療X光放射科的評定和定期檢驗.第3-2部分:驗收試驗.乳腺X-射線設備成像性能 |
(Evaluation and routine testing in medical imaging departments - Part 3-2: Acceptance tests; Imaging performance of mammographic X-ray equipment (IEC 61223-3-2:1996); German version EN 61223-3-2:1996) |
| DIN EN 61223-3-3-2000 |
醫院成像科中的評定和常規試驗.第3-3部分:驗收試驗.數字減法血管造影術(DSA)用X線透視設備的成像性能 |
(Evaluation and routine testing in medical imaging departments - Part 3-3: Acceptance tests; Imaging performance of X-ray equipment for digital subtraction angiography (IEC 61223-3-3:1996); German version EN 61223-3-3:1996) |
| DIN EN 61223-3-4-2001 |
醫療成像科中的評定和常規試驗.第3-4部分:驗收試驗.牙科X射線設備的成像性能 |
(Evaluation and routine testing in medical imaging departments - Part 3-4: Acceptance tests; Imaging performance of dental X-ray equipment (IEC 61223-3-4:2000); German version EN 61223-3-4:2000) |
| DIN EN 61228-1995 |
太陽浴用的紫外線燈紫外線輻射量的規定和測量方法 |
(Method of measuring and specifying the UV-radiation of ultraviolet lamps used for sun-tanning (IEC 61228:1993); German version EN 61228:1994) |
| DIN EN 61228/A1-1997 |
太陽浴用的紫外線燈紫外線輻射量的規定和測量方法.補充件1 |
(Method of measuring and specifying the UV-radiation of ultraviolet lamps used for sun-tanning (IEC 61228:1993/A1:1996); German version EN 61228:1994/A1:1996) |
| DIN EN 61229-1997 |
交流設備帶電作業用剛性保護罩 |
(Rigid protective covers for live working on a.c. installations (IEC 61229:1993, modified); German version EN 61229:1995) |
| DIN EN 61229/A1-1999 |
交流設備帶電作業用剛性保護罩.修正A1 |
(Rigid protective covers for live working on a.c. installations; Amendment A1 (IEC 61229:1993/A1:1998); German version EN 61229:1995/A1:1998) |
| DIN EN 61229/A2-2003 |
交流設備上帶電作業用剛性保護罩.修改件A2 |
(Rigid protective covers for live working on a.c. installations (IEC 61229:1993/A2:2002); Amendment A2; German version EN 61229:1995/A2:2002) |
| DIN EN 61230-1996 |
帶電作業.便攜式接地電路或接地短路電路設備 |
(Live working - Portable equipment for earthing or earthing and short-circuiting (IEC 61230:1993, modified); German version EN 61230:1995) |
| DIN EN 61232-2001 |
電氣設備用包鋁鋼絲 |
(Aluminium-clad steel wires for electrical purposes (IEC 61232:1993, modified); German version EN 61232:1995 + A11:2000) |
| DIN EN 61234-1-1994 |
電絕緣材料水解穩定性的試驗方法.第1部分:塑料薄膜 |
(Method of test for the hydrolytic stability of electrical insulating materials - Part 1: Plastic films (IEC 61234-1:1994); German version EN 61234-1:1994) |
| DIN EN 61234-2-1998 |
電絕緣材料.水解穩定性的試驗方法.第2部分:模制熱固材料 |
(Electrical insulating materials - Method of test for the hydrolytic stability - Part 2: Moulded thermosets (IEC 61234-1:1997); German version EN 61234-2:1998) |
| DIN EN 61235-1997 |
帶電作業.電工用絕緣空心管 |
(Live working - Insulating hollow tubes for electrical purposes (IEC 61235:1993, modified); German version EN 61235:1995) |
| DIN EN 61236-1996 |
帶電作業用滑動座架,電桿夾及附件 |
(Saddles, pole clamps (stick clamps) and accessories for live working (IEC 61236:1993, modified); German version EN 61236:1995) |
| DIN EN 61237-1-1995 |
廣播磁帶錄像機.測量方法.第1部分:技術要求 |
(Broadcast video tape recorders - Methods of measurement - Part 1: Mechanical measurements (IEC 61237-1:1994); German version EN 61237-1:1994) |
| DIN EN 61237-2-1996 |
廣播磁帶錄像機測量方法.第2部分:模擬合成錄像信號的電氣測量 |
(Methods of measurement for broadcast video tape recorders - Part 2: Electrical measurements of analogue composite video signals (IEC 61237-2:1995); German version EN 61237-2:1995) |
| DIN EN 61237-3-1995 |
廣播磁帶錄像機測量方法.第3部分:模擬視頻信號的電氣測量 |
(Methods of measurement for broadcast video tape recorders - Part 3: Electrical measurements for analogue component video signals (IEC 61237-3:1995); German version EN 61237-3:1995) |
| DIN EN 61237-4-1998 |
廣播用磁帶錄像機.測量方法.第4部分:模擬音頻信號的功率特性的測量 |
(Broadcast video tape recorders - Methods of measurement - Part 4: Analogue audio performance measurements (IEC 61237-4:1997); German version EN 61237-4:1997) |
| DIN EN 61238-1-2004 |
額定電壓36kV(Um=42kV)及以下的電力電纜用壓接和機械連接器.第1部分:試驗方法和要求 |
|
| DIN EN 61240-1997 |
壓電裝置.頻率控制和選擇用表面安裝裝置框圖制備.總則 |
(Piezoelectric devices - Preparation of outline drawings of surface mounted devices (SMD) for frequency control and selection; General rules (IEC 61240:1994); German version EN 61240:1997) |
| DIN EN 61241-1-2005 |
有可燃性粉塵場合用電氣設備.第1部分:外殼防護tD型 |
|
| DIN EN 61241-14-2005 |
有可燃性粉塵場合用電氣設備.第14部分:選擇和安裝 |
|
| DIN EN 61241-18-2005 |
有可燃性粉塵場合用電氣設備.第18部分:封裝mD型防護設備 |
|
| DIN EN 61241-18-2005 |
有可燃性粉塵場合用電氣設備.第18部分:封裝mD型防護設備 |
|
| DIN EN 61241-2-2-1996 |
用于易燃粉塵的電氣設備.第2部分:檢驗方法.第1節:粉塵傾倒的電阻測定法 |
(Electrical apparatus for use in the presence of combustible dust - Part 2: Test methods - Section 2: Method for determining the electrical resistivity of dust in layers (IEC 61241-2-2:1993 + Corrigendum 1994); German version EN 61241-2-2:1995) |
| DIN EN 61242-1997 |
電氣安裝材料.家用和類似用途的電纜盤 |
(Electrical accessories - Cable reels for household and similar purposes (IEC 61242:1995, modified); German version EN 61242:1997) |
| DIN EN 61242-2004 |
電氣附件.家用和類似用途卷線盤 |
|
| DIN EN 61243-1 Berichtigung 1-2001 |
DINEN61243-1-1998的技術勘誤 |
(Corrigendum to DIN EN 61243-1 (VDE 0682 Teil 411):1998-05) |
| DIN EN 61243-1-1998 |
帶電作業.電壓檢測器.第1部分:1kV以上交流電壓用容電器類型 |
(Live working - Voltage detectors - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c. (IEC 61243-1:1993 + A1:1997); German version EN 61243-1:1997 + A1:1997) |
| DIN EN 61243-2-2001 |
帶電作業.電壓探測器.第2部分:1kV-36kV交流電壓用電阻類型 |
(Live working - Voltage detectors - Part 2: Resistive type to be used for voltages of 1 kV to 36 kV a.c. (includes Amendment A1:2000) (IEC 61243-2:1995 + A1:1999 + Corrigendum 2000); German version EN 61243-2:1997 + A1:2000) |
| DIN EN 61243-2/A2-2003 |
帶電作業.電壓檢測器.第2部分:1kV-36kV交流電壓用電阻類型.修改件A2 |
(Live working - Voltage detectors - Part 2: Resistive type to be used for voltages of 1 kV to 36 kV a.c. (IEC 61243-2:1995/A2:2002); Amendment A2; German version EN 61243-2:1997/A2:2002) |
| DIN EN 61243-3-1999 |
帶電作業.電壓檢測器.第3部分:低壓網用兩極電壓檢測器 |
(Live working - Voltage detectors - Part 3: Two-pole low voltage type (IEC 61243-3:1998); German version EN 61243-3:1998) |
| DIN EN 61243-5-2002 |
帶電作業.電壓檢測器.第5部分:電壓檢測器(VDS) |
(Live working - Voltage detectors - Part 5: Voltage detective systems (VDS) (IEC 61243-5:1997, modified); German version EN 61243-5:2001) |
| DIN EN 61247-1997 |
磁氧物和相伴部件制的PM芯.尺寸 |
(PM-cores made of magnetic oxides and associated parts - Dimensions (IEC 61247:1995); German version EN 61247:1997) |
| DIN EN 61248-1-1998 |
電子和電信設備用變壓器和電感器.第1部份:總規范 |
(Transformers and inductors for use in electronic and telecommunication equipment - Part 1: Generic specification (IEC 61248-1:1996); German version EN 61248-1:1997) |
| DIN EN 61248-2-1998 |
電子和電信設備用變壓器和電感器.第2部份:有合格認證的信號變壓器用分規范 |
(Transformers and inductors for use in electronic and telecommunication equipment - Part 2: Sectional specification for signal transformers on the basis of the capability approval procedure (IEC 61248-2:1996); German version EN 61248-2:1997) |
| DIN EN 61248-3-1998 |
電子和電信設備用變壓器和電感器.第3部份:有合格認證的電力變壓器用分規范 |
(Transformers and inductors for use in electronic and telecommunication equipment - Part 3: Sectional specification for power transformers on the basis of the capability approval procedure (IEC 61248-3:1996); German version EN 61248-3:1997) |
| DIN EN 61248-4-1998 |
電子和電信設備用變壓器和電感器.第4部分:有合格認證的開關式供電用電力變壓器的分規范 |
(Transformers and inductors for use in electronic and telecommunication equipment - Part 4: Sectional specification for power transformers for switched mode power supplies (SMPS) on the basis of the capability approval procedure (IEC 61248-4:1996); German |
| DIN EN 61248-5-1998 |
電子和電信設備用變壓器和電感器.第5部分:有合格認證的脈沖變壓器的分規范 |
(Transformers and inductors for use in electronic and telecommunication equipment - Part 5: Sectional specification for pulse transformers on the basis of the capability approval procedure (IEC 61248-5:1996); German version EN 61248-5:1997) |
| DIN EN 61248-6-1998 |
電子和電信設備用變壓器和電感器.第6部分:有合格認證的電感器的分規范 |
(Transformers and inductors for use in electronic and telecommunication equipment - Part 6: Sectional specification for inductors on the basis of the capability approval procedure (IEC 61248-6:1996); German version EN 61248-6:1997) |
| DIN EN 61248-7-1998 |
電子和電信設備用變壓器和電感器.第7部分:以合格認證為基礎的HF-電感器和ZF-變壓器的分規范 |
(Transformers and inductors for use in electronic and telecommunication equipment - Part 7: Sectional specification for high frequency inductors and intermediate frequency transformers on the basis of the capability approval procedure (IEC 61248-7:1996); |
| DIN EN 61249-2-10 Berichtigung 1-2005 |
印制板和其它互聯結構用材料.第2-10部分:包被和非包被增強基材.阻燃型(垂直燃燒試驗)銅包被改良或未改良的氰酸酯溴化環氧編織E型玻璃纖維增強層壓板 |
|
| DIN EN 61249-2-10-2004 |
印制板和其它互連結構用材料.第2-10部分:包被和非包被增強基材.規定了易燃性的包銅的改良或未改良的氰酸酯 |
(Materials for printed boards and other interconnecting structures - Part 2-10: Reinforced base materials clad and unclad - Cyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vert) |
| DIN EN 61249-2-10-2004 |
印制板和其它互連結構用材料.第2-10部分:包被和非包被增強基材.規定了易燃性的包銅的改良或未改良的氰酸酯溴化環氧樹脂編織E型玻璃纖維增強層壓板(垂直燃燒試驗) |
|
| DIN EN 61249-2-11 Berichtigung 1-2005 |
印制板和其他互聯結構用材料.第2-11部分:包被和非包被增強基材.阻燃型(垂直燃燒試驗)銅包被的聚酰亞胺溴化環氧改良或非改良的編織E型玻璃纖維增強層壓板 |
|
| DIN EN 61249-2-11-2004 |
印制板和其它互連結構用材料.第2-11部分:包被和非包被增強基材料.阻燃型銅包被的聚酰亞胺溴化環氧改良或非改良的編織E型玻璃纖維增強疊層板材(垂直燃燒試驗) |
|
| DIN EN 61249-2-12-1999 |
印制板和其它互連結構用材料.第2-12部分:涂覆或未涂覆增強基底材料分規范集.限定可燃性的銅包被環氧樹脂非 |
(Materials for printed boards and other interconnecting structures - Part 2-12: Sectional specification set for reinforced base materials, clad and unclad; epoxide non-woven aramid laminate of defined flammability, copper-clad (IEC 61249-2-12:1999); Germa |
| DIN EN 61249-2-13-1999 |
印制板和其它互連結構用材料.第2-13部分:涂覆或未涂覆增強基底材料分規范集.限定可燃性的銅包被氰酸酯非編 |
(Materials for printed boards and other interconnecting structures - Part 2-13: Sectional specification set for reinforced base materials, clad and unclad; cyanate ester non-woven aramid laminate of defined flammability, copper clad (IEC 61249-2-13:1999); |
| DIN EN 61249-2-18-2002 |
印制板和其它互連結構用材料.第2-18部分:包覆或非包覆增強基材.規定了易燃性的聚酯非編織玻璃纖維增強層壓 |
(Materials for printed boards and other interconnecting structures - Part 2-18: Reinforced base materials clad and unclad; Polyester non-woven fibreglass laminated sheet of defined flammability (vertical burning test), copper-clad(IEC 61249-2-18:2002); Ge |
| DIN EN 61249-2-19-2002 |
印制板和其它互連結構用材料.第2-19部分:包被和非包被增強基材料.規定燃燒性的環氧交叉簾布層線性纖維玻璃 |
(Materials for printed boards and other interconnecting structures - Part 2-19: Reinforced base materials, clad and unclad; Epoxide cross-plied linear fibreglass-reinforced laminated sheets of defined flammability (vertical burning test), copper clad (IEC |
| DIN EN 61249-2-21-2004 |
印制板和其它互連結構用材料.第2-21部分:包被和非包被增強基材料.阻燃型銅包被的非鹵代環氧編織E型玻璃纖維增強疊層板材(垂直燃燒試驗) |
|
| DIN EN 61249-2-4-2002 |
印制板和其它互連結構用材料.第2-4部分:包被和非包被增強基材.規定了易燃性的覆銅聚酯非編織/編織玻璃纖維 |
(Materials for printed boards and other for interconnecting structures - Part 2-4: Reinforced base materials, clad and unclad; Polyester non-wowen/woven fibreglass laminated sheet of defined flammability (vertical burning test), copper-clad(IEC 61249-2-4: |
| DIN EN 61249-2-5 Berichtigung 1-2005 |
印制板和其他互聯結構用材料.第2-5部分:包被和非包被增強基材.阻燃型(垂直燃燒試驗)銅包被的溴化環氧纖維素紙增強芯/編織的E型玻璃增強表面層壓板 |
|
| DIN EN 61249-2-5-2004 |
印制板和其它互連結構用材料.第2-5部分:包被和非包被增強基材料.阻燃型銅包被的溴化環氧纖維素紙增強芯/編織E型玻璃纖維增強表面疊層板材(垂直燃燒試驗) |
|
| DIN EN 61249-2-6 Berichtigung 1-2005 |
印制板和其他互聯結構用材料.第2-6部分:包被和非包被增強基材.阻燃型(垂直燃燒試驗)銅包被的溴化環氧非編織/編織的E型玻璃增強表面層壓板 |
|
| DIN EN 61249-2-6-2004 |
印制板和其它互連結構用材料.第2-6部分:包被和非包被增強基材料.阻燃型銅包被的溴化環氧非編織/編織E型玻璃纖維增強疊層板材(垂直燃燒試驗) |
|
| DIN EN 61249-2-7-2002 |
印制板和其它互連結構用材料.第2-7部分:包被和非包被增強基材.規定了易燃性的環氧編織E級覆銅層壓板(垂直燃 |
(Materials for printed boards and other interconnecting structures - Part 2-7: Reinforced base materials clad and unclad; Epoxide woven E-glass laminated sheet of defined flammability (vertical burning test), copper-clad(IEC 61249-2-7:2002); German versio |
| DIN EN 61249-2-8-2004 |
印制板和其它互連結構用材料.第2-8部分:包被和非包被增強基材.規定了易燃性的包銅的改良溴化環氧樹脂編織玻 |
(Materials for printed boards and other interconnecting structures - Part 2-8: Reinforced base materials, clad and unclad - Modified brominated epoxide woven fibreglass reinforced laminate sheets of defined flammability (vertical burning test), copper-cla |
| DIN EN 61249-2-8-2004 |
印制板和其它互連結構用材料.第2-8部分:包被和非包被增強基材.規定了易燃性的包銅的改良溴化環氧樹脂編織玻璃纖維增強層壓板(垂直燃燒試驗) |
|
| DIN EN 61249-2-9-2004 |
印制板和其它互連結構用材料.第2-9部分:包被和非包被增強基材.規定了易燃性的包銅的二順丁烯二酰亞胺/三嗪 |
(Materials for printed boards and other interconnecting structures - Part 2-9: Reinforced base materials clad and unclad - Bismaleimide/triazine, modified epoxide or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical) |
| DIN EN 61249-2-9-2004 |
印制板和其它互連結構用材料.第2-9部分:包被和非包被增強基材.規定了易燃性的包銅的二順丁烯二酰亞胺/三嗪改良或未改良的環氧樹脂編織E型玻璃纖維增強層壓板(垂直燃燒試驗) |
|
| DIN EN 61249-3-3-1999 |
印制板和其它互連結構用材料.第3-3部分:涂覆和未涂覆非增強基底材料(用于撓性印制板)的分規范集.粘性涂覆撓 |
(Materials for printed boards and other interconnecting structures - Part 3-3: Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards); adhesive coated flexible polyester film (IEC 61249-3-3:1999 |
| DIN EN 61249-3-4-1999 |
印制板和其它互連結構用材料.第3-4部分:涂覆和未涂覆非增強基底材料(用于撓性印制板)的分規范集.粘性涂覆撓 |
(Materials for printed boards and other interconnecting structures - Part 3-4: Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards); adhesive coated flexible polyimide film (IEC 61249-3-4:1999 |
| DIN EN 61249-3-5-1999 |
印制板和其它互連結構用材料.第3-5部分:涂覆和未涂覆非增強基底材料(用于撓性印制板)的分規范集.貼花粘性薄 |
(Materials for printed boards and other interconnecting structures - Part 3-5: Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards); transfer adhesive films (IEC 61249-3-5:1999); German versio |
| DIN EN 61249-5-1-1996 |
連接結構用材料.第5部分:帶和不帶涂層的導電箔和薄膜的分規范.第1節:銅箔(用于生產銅涂覆基材) |
(Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with and without coatings; section 1: Copper foils (for the manufacturer of copper-clad base materials) (IEC 61249-5-1:1995); German version EN |
| DIN EN 61249-5-4-1997 |
連接結構用材料.第5部分:帶或不帶涂層的導電箔和薄膜的分規范.第4節:導電油墨 |
(Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with or without coatings; section 4: Conductive inks (IEC 61249-5-4:1996); German version EN 61249-5-4:1996) |
| DIN EN 61249-7-1-1996 |
連接結構用材料.第7部分:緊約束芯材料分規范.第1節:銅/殷鋼/銅 |
(Materials for interconnection structures - Part 7: Sectional specification set for restraining core materials; section 1: Copper/Invar/copper (IEC 61249-7-1:1995); German version EN 61249-7-1:1995) |
| DIN EN 61249-8-7-1997 |
連接結構用材料.第8部分:非導電薄膜和涂層用分規范.第7節:打印油墨 |
(Materials for interconnection structures - Part 8: Sectional specification set for non-conductive films and coatings; section 7: Marking legend inks (IEC 61249-8-7:1996); German version EN 61249-8-7:1996) |
| DIN EN 61249-8-8-1998 |
連接結構用材料.第8部分:不導電薄膜和涂層分規范.第8節:臨時性聚合物涂層 |
(Materials for interconnection structures - Part 8: Sectional specification set for non-conductive films and coatings; Section 8: Temporary polymer coatings (IEC 61249-8-8:1997); German version EN 61249-8-8:1997) |
| DIN EN 61252-2003 |
電聲學.專用測聲表規范 |
(Electroacoustics - Specifications for personal sound exposure meters (IEC 61252:1993 + A1:2000); German version EN 61252:1995 + A1:2001) |
| DIN EN 61254-1994 |
家用電動剃刀.性能測量法 |
(Electric shavers for household use - Methods for measuring the performance (IEC 61254:1993); German version EN 61254:1994) |
| DIN EN 61255-1995 |
家用電熱墊.性能測量方法 |
(Household electric heating pads - Methods for measuring performance (IEC 61255:1994); German version EN 61255:1994) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com