標準號 |
中文名稱 |
英文名稱 |
| prEN 3668-1997 |
標準號： |
中文標題： |
| prEN 3671-1997 |
標準號： |
中文標題： |
| prEN 3682-001-2000 |
航空航天系列插頭和插座 矩形可互換插入型裝在板上連續操作溫度 150℃連接器第001部分：技術規范 |
Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150℃ continuous - Part 001: Technical specification |
| prEN 3682-002-2000 |
航空航天系列插頭和插座 矩形可互換插入型裝在板上連續操作溫度 150℃連接器第００２部分：性 |
Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150℃ continuous - Part 002: Specification of performance and contact arrangements |
| prEN 3716-002-1998 |
航空航天系列數字?jǐn)?shù)據傳輸用具有三線接口的單路連接器第００２部分：使用條件和產品標準目錄 |
Aerospace series - Connectors, single-way with triaxial interface, for transmission of digital data - Part 002: Conditions for use and list of product standards |
| prEN 3716-003-1998 |
航空航天系列數字?jǐn)?shù)據傳輸用具有三線接口的單路連接器第００３部分：焊接插座產品標準 |
Aerospace series - Connectors, single-way with triaxial interface, for transmission of digital data - Part 003: Solder receptacle - Product standard |
| prEN 3716-004-1998 |
航空航天系列數字?jǐn)?shù)據傳輸用具有三線接口的單路連接器第００４部分：焊接插頭產品標準 |
Aerospace series - Connectors, single-way with triaxial interface, for transmission of digital data - Part 004: Solder plug - Product standard |
| prEN 3719-1999 |
航空航天系列電纜用鋁和鋁合金導體產品標準 |
Aerospace series - Aluminium or aluminium alloy conductors for electrical cables - Product standard |
| prEN 3724-2003 |
prEN 3724-2003 |
|
| prEN 3725-2003 |
prEN 3725-2003 |
|
| prEN 3726-2003 |
prEN 3726-2003 |
|
| prEN 3727-2001 |
航空航天系列有法蘭式定位蓋的飛機機架用硬質滾動軸承尺寸和負荷 |
Aerospace series - Bearings, airframe rolling rigid with flanged alignment housing - Dimensions and loads |
| prEN 3728-1999 |
航空航天系列FE-PA92HT (A286)鍍銀耐熱鋼、自鎖左旋螺紋軸螺母 |
Aerospace series - Shaft-nuts, self-locking, left-hand thread, in heat resisting steel FE-PA92HT (A286), silver plated |
| prEN 3729-1999 |
航空航天系列FE-PA92HT (A286)鍍銀耐熱鋼、自鎖左旋螺紋環 |
Aerospace series - Rings, threaded, self-locking, left-hand thread, in heat resisting steel FE-PA92HT (A286), silver plated |
| prEN 374-4-1990 |
抗化學藥品和微生物的防護手套 第4部分：耐滲透的測定 漏氣試驗 |
Protective gloves against chemicals and micro-organisms; part 4: determination of resistance to penetration; air leak test |
| prEN 374-5-1990 |
抗化學藥品和微生物的防護手套 第5部分：耐化學藥品滲透的測定 |
Protective gloves against chemicals and micro-organisms; part 5: determination of resistance to permeation by chemicals |
| prEN 3745-202-1999 |
航空航天系列航空用光纜光纖試驗方法第202部分：纖維尺寸 |
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 202: Fibre dimensions |
| prEN 3745-306-1999 |
航空航天系列航空用光纜和光纖試驗方法第306部分：衰減值溫度循環的變化 |
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 306: Variation of attenuation during temperature cycling |
| prEN 3745-401-1999 |
航空航天系列航空用光纜和光纖試驗方法第401部分：加速老化 |
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 401: Accelerated ageing |
| prEN 3745-402-1998 |
航空航天系列航空用光纜和光纖試驗方法第402部分：溫度循環 |
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 402: Temperature cycling |
| prEN 3745-404-1999 |
航空航天系列航空用光纜和光纖試驗方法第404部分：熱沖擊 |
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 404: Thermal shock |
| prEN 3745-406-1999 |
航空航天系列航空用光纜和光纖試驗方法第406部分：冷彎曲測試 |
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 406: Cold bend test |
| prEN 3745-407-1999 |
航空航天系列航空用光纜和光纖試驗方法第407部分：易燃性 |
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 407: Flammability |
| prEN 3745-412-1999 |
航空航天系列航空用光纜和光纖試驗方法第412部分：防潮性能 |
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 412: Humidity resistance |
| prEN 3745-501-1998 |
航空航天系列航空用光纜和光纖試驗方法第501部分：光纖校驗試驗 |
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 501: Optical fibre proof test |
| prEN 3745-502-1998 |
航空航天系列航空用光纜和光纖試驗方法第502部分：短光纖的抗拉強度 |
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 502: Tensile strength for short length of optical fibres |
| prEN 3745-503-2000 |
航空航天系列航空用光纜和光纖試驗方法第503部分：磨擦磨損 |
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 503: Scrape abrasion |
| prEN 3745-506-2000 |
航空航天系列航空用光纜和光纖試驗方法第506部分：抗撞擊性 |
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 506: Impact resistance |
| prEN 3745-512-2000 |
航空航天系列航空用光纜和光纖試驗方法第512部分：耐撓曲性 |
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 512: Flexure endurance |
| prEN 3745-513-1999 |
航空航天系列航空用光纜和光纖試驗方法第513部分：抗壓碎性 |
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 513: Crush resistance |
| prEN 3745-703-2000 |
航空航天系列航空用光纜和光纖試驗方法第703部分：制造商標記的耐久性 |
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 703: Durability of manufacturers marking |
| prEN 3745-807-2001 |
航空航天系列航空用光纜和光纖試驗方法第807部分：傳輸阻抗 |
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 807: Transfer impedance |
| prEN 3745-808-2001 |
航空航天系列航空用光纜和光纖試驗方法第808部分：串音 |
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 808: Cross-talk |
| prEN 3752-2003 |
prEN 3752-2003 |
|
| prEN 3757-1998 |
標準號： |
中文標題： |
| prEN 3758-1997 |
航空航天系列單通道高速數據傳輸系統 |
Aerospace series - Simplex high speed data transmission system |
| prEN 3771-1999 |
標準號： |
中文標題： |
| prEN 3776-1999 |
航空航天系列耐腐蝕鋼制快速斷路、雙球單動單鎖帶Ｌ柄銷 |
Aerospace series - Pins, quick release, two balls, single acting, single locking, L type handle, in corrosion resisting steel |
| prEN 3777-1999 |
航空航天系列快速斷路、單動和雙動銷技術規范 |
Aerospace series - Pins, quick release, single and double acting - Technical specification |
| prEN 3778-1999 |
航空航天系列耐腐蝕鋼制快速斷路、兩球雙動單鎖帶Ｌ柄銷 |
Aerospace series - Pins, quick release, two balls, double acting, single locking, L type handle, in corrosion resisting steel |
| prEN 3779-2001 |
航空航天系列聚碳酸酯板尺寸 |
Aerospace series - Polycarbonate sheet - Dimensions |
| prEN 381-6-1990 |
手持式鏈鋸使用者用防護服 第6部分：鞋靴的要求 |
Protective clothing for users of hand held chain saws; part 6: requirements for boots |
| prEN 3813-2002 |
prEN 3813-2002 |
|
| prEN 3820-1999 |
標準號： |
中文標題： |
| prEN 3822-1999 |
航空航天系列 鈍化耐熱鋼厚扁平墊圈 |
Aerospace series - Washers, flat, thick, in heat resisting steel, passivated |
| prEN 3831-2003 |
prEN 3831-2003 |
|
| prEN 384-2002 |
結構木材 機械性能特征值的測定 |
Structural timber - Determination of characteristic values of mechanical properties and density |
| prEN 3841-100-1998 |
航空航天系列斷路器試驗方法第100部分：總則 |
Aerospace series - Circuit breakers, test methods - Part 100: General |
| prEN 3841-301-1998 |
航空航天系列斷路器試驗方法第301部分：電壓降 |
Aerospace series - Circuit breakers, test methods - Part 301: Voltage drop |
| prEN 3841-302-1998 |
航空航天系列斷路器試驗方法第302部分：絕緣電阻抗 |
Aerospace series - Circuit breakers, electriques test methods - Part 302: Insulation resistance |
| prEN 3841-303-1998 |
航空航天系列斷路器試驗方法第303部分：絕緣強度 |
Aerospace series - Circuit breakers, test methods - Part 303: Dielectric strength |
| prEN 3841-304-1998 |
航空航天系列斷路器試驗方法第304部分：跳閘點 |
Aerospace series - Circuit breakers, test methods - Part 304: Tripping points |
| prEN 3841-305-1998 |
航空航天系列斷路器試驗方法第305部分：短路性能 |
Aerospace series - Circuit breakers, test methods - Part 305: Short-circuit performance |
| prEN 3841-306-1998 |
航空航天系列斷路器試驗方法第306部分：使用壽命 |
Aerospace series - Circuit breakers, test methods - Part 306: Service life |
| prEN 3841-307-1998 |
航空航天系列斷路器試驗方法第307部分：帶鎖定的跳閘系統的性能 |
Aerospace series - Circuit breakers, test methods - Part 307: Performance with a locked tripping system |
| prEN 3841-401-1998 |
航空航天系列斷路器試驗方法第401部分：沙塵和灰塵 |
Aerospace series - Circuit breakers, test methods - Part 401: Sand and dust |
| prEN 3841-402-1998 |
航空航天系列斷路器試驗方法第402部分：腐蝕 |
Aerospace series - Circiut breakers, test methods - Part 402: Corrosion |
| prEN 3841-403-1998 |
航空航天系列斷路器試驗方法第403部分：濕度 |
Aerospace series - Circuit breakers, test methods - Part 403: Humidity |
| prEN 3841-404-1998 |
航空航天系列斷路器試驗方法第404部分：防爆性 |
Aerospace series - Circuit breakers, test methods - Part 404: Explosion proofness |
| prEN 3841-405-1998 |
航空航天系列斷路器試驗方法第405部分：流體阻力 |
Aerospace series - Circuit breakers, test methods - Part 405: Fluid resistance |
| prEN 3841-406-1998 |
航空航天系列斷路器試驗方法第406部分：可燃性 |
Aerospace series - Circuit breakers, test methods - Part 406: Flammability |
| prEN 3841-503-1998 |
航空航天系列斷路器試驗方法第303部分：驅動部件的強度 |
Aerospace series - Circuit breakers, test methods - Part 503: Strength of actuating components |
| prEN 3841-504-1998 |
航空航天系列斷路器試驗方法第504部分：裝配組件的強度 |
Aerospace series - Circuit breakers, test methods - Part 504: Strength of mounting elements |
| prEN 3841-505-1998 |
航空航天系列斷路器試驗方法第505部分：主要接線終端的強度 |
Aerospace series - Circuit breakers, test methods - Part 505: Strength of main terminals |
| prEN 3841-506-1998 |
航空航天系列斷路器試驗方法第506部分：振動特性 |
Aerospace series - Circuit breakers, test methods - Part 506: Vibration performance |
| prEN 3841-507-1998 |
航空航天系列斷路器試驗方法第507部分：機械沖擊 |
Aerospace series - Circuit breakers, test methods - Part 507: Mechanical shocks |
| prEN 3841-508-1998 |
航空航天系列斷路器試驗方法第508部分：離心加速度 |
Aerospace series - Circuit breakers, test methods - Part 508: Centrifugal acceleration |
| prEN 3841-509-1998 |
航空航天系列斷路器試驗方法第509部分：信號接線柱的插入和拔出力 |
Aerospace series - Circuit breakers, test methods - Part 509: Insertion and extraction forces of signal contact terminals |
| prEN 3841-510-1998 |
航空航天系列斷路器試驗方法第510部分：信號接線柱的強度 |
Aerospace series - Circuit breakers, test methods - Part 510: Strength of signal contact terminals |
| prEN 3841-511-1998 |
航空航天系列斷路器試驗方法第511部分：綜合試驗溫度、高度和振動 |
Aerospace series - Circuit breakers, test methods - Part 511: Combined test: temperature, altitude and vibration |
| prEN 3843-1999 |
航空航天系列鈍化耐熱鋼制十二角自鎖帶埋頭孔螺母等級：1100 MPa (環境溫度)/650℃ |
Aerospace series - Nuts, bihexagonal, self-locking, with counterbore, in heat resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/650℃ |
| prEN 3847-1997 |
航空航天系列色漆和清漆沉淀值的測定 |
Aerospace series - Paints and varnishes - Determination of sedimentation rating |
| prEN 3861-2001 |
航空航天系列非金屬材料、玻璃透明度材料標準、熱鋼化鈉鈣浮法玻璃 |
Aerospace series - Non-metallic materials; Glass transparencies - Material standard; Thermally tempered soda lime float glass |
| prEN 3862-2001 |
航空航天系列非金屬材料、玻璃透明度材料標準、化學鋼化鈉鈣浮法玻璃 |
Aerospace series - Non-metallic materials; Glass transparencies - Material standard; Chemically tempered soda lime float glass |
| prEN 3863-2001 |
航空航天系列非金屬材料、玻璃透明度試驗方法、平面度的測定 |
Aerospace series - Non-metallic materials; Glass transparencies - Test methods; Determination of flatness |
| prEN 3864-2001 |
航空航天系列非金屬材料、玻璃透明度試驗方法、破裂系數的測定 |
Aerospace series - Non-metallic materials; Glass transparencies - Test methods; Determination of modulus of rupture |
| prEN 3866-2001 |
航空航天系列非金屬材料、玻璃透明度試驗方法、刮痕和表面波紋的測定 |
Aerospace series - Non-metallic materials; Glass transparencies - Test methods; Determination of ream and surface ripple |
| prEN 3874-1998 |
航空航天系列金屬材料試驗方法等幅控制力低循環疲勞測試 |
Aerospace series - Test methods for metallic materials - Constant amplitude force-controlled low cycle fatique testing |
| prEN 3876-1997 |
航空航天系列金屬材料試驗方法銅焊合金熔化試驗 |
Aerospace series - Test method for metallic materials - Braze alloys - Fusion test |
| prEN 3877-1997 |
航空航天系列金屬材料試驗方法用銅焊合金的差熱分析測定固線溫度和液態溫度 |
Aerospace series - Metallic materials - Test method - Determination of solidus and liquidus temperatures by differential thermal analysis of braze alloys |
| prEN 3878-1997 |
航空航天系列金屬材料試驗方法銅焊合金撓性試驗 |
Aerospace series - Test method for metallic materials - Braze alloys - Flexibility test |
| prEN 389-1990 |
非活性醫療器械的標簽 |
Labelling of non-active medical devices |
| prEN 3907-2003 |
prEN 3907-2003 |
|
| prEN 3908-1999 |
航空航天系列鈍化耐腐蝕鋼潤滑軸向噴嘴 |
Aerospace series - Nipples, lubricating, axial type, in corrosion resisting steel, passivated |
| prEN 3913-1999 |
航空航天系列部件修復用耐熱鎳基合金 NI-PH2601 (NI-P100HT鉻鎳鐵合金718)、薄壁自鎖短內螺紋上鍍銀的插 |
Aerospace series - Insert, thin wall, self-locking, short, in heat resisting nickel base alloy NI-PH2601 (NI-P100HT,Inconel 718), silver plated internal thread, for salvage of components |
| prEN 3914-1999 |
航空航天系列部件修復用耐熱鎳基合金 NI-PH2601 (NI-P100HT鉻鎳鐵合金718)、薄壁自鎖長上鍍銀的插件 |
Aerospace series - Insert, thin wall, self-locking, long, in heat resisting nickel base alloy NI-PH2601 (NI-P100HT,Inconel 718), silver plated on internal thread, for salvage of components |
| prEN 3915-1999 |
航空航天系列部件修復用耐熱鎳基合金 NI-PH2601 (NI-P100HT鉻鎳鐵合金718)、薄壁自鎖ＭＪ螺紋插件等級 |
Aerospace series - Insert, thin wall, self-locking, Mj threads, in heat resisting nickel base alloy NI-PH2601 (NI-P100HT,Inconel 718), for salvage of components, classification: 1275 MPa (at ambient temperature)/550℃ - Technical specification |
| prEN 3916-1999 |
航空航天系列部件修復用薄壁插件 |
Aerospace series - Insert, thin wall - Salvage procedure for components |
| prEN 3969-1997 |
標準號： |
中文標題： |
| prEN 3971-1997 |
標準號： |
中文標題： |
| prEN 3976-1999 |
航空航天系列鈦和鈦合金試驗方法氫含量確定的化學分析 |
Aerospace series - Titanium and titanium alloys - Test method - Chemical analysis for the determination of hydrogen content |
| prEN 398-1992 |
摩托車和機動自行車駕駛者和乘客用防護頭盔 |
Protective helmets for drivers and passengers of motor cycles and mopeds |
| prEN 3988-1998 |
航空航天系列金屬材料的試驗方法等幅控制應變低循環疲勞試驗 |
Aerospace series - Test methods for metallic materials - Constant amplitude strain-controlled low cycle fatique testing |
| prEN 3991-1997 |
標準號： |
中文標題： |
| prEN 3994-1997 |
航空航天系列 FE-CM1501 (X13CrNiMoCo12-3-2-2)非熱處理鋼再熔原料 |
Aerospace series - Steel FE-CM1501 (X13CrNiMoCo12-3-2-2) non heat treated - Remelting stock |
| prEN 40-2-1999 |
燈柱 第2部分：一般要求和尺寸 |
Lighting columns - Part 2: General requirements and dimensions |
| prEN 40-9-1991 |
燈柱 第9部分：加筋和預應力混凝土燈柱的特殊要求 |
Lighting columns; part 9: special requirements for reinforced and prestressed concrete lighting columns |
| prEN 4008-001-1998 |
航空航天系列光電連接件雷管鉗和相關的附件第001部分：技術規范 |
Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 001: Technical specification |
| prEN 4008-002-1998 |
航空航天系列光電連接件雷管鉗和相關的附件第002部分：產品標準目錄 |
Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 002: List of product standards |
| prEN 4012-2003 |
prEN 4012-2003 |
|
| prEN 403-2003 |
自救式呼吸保護設備 火災中自救用帶罩過濾裝置 要求、測試和標志 |
Respiratory protective devices for self-rescue - Filtering devices with hood for self-rescue from fire - Requirements, testing, marking / Note: Intended as replacement for EN 403 (1993-04). |
| prEN 404-2002 |
自救式呼吸保護設備 自救式一氧化碳過濾器 要求、測試和標志 |
Respiratory protective devices for self-rescue - Filter self-rescuer from carbon monoxide - Requirements, testing, marking |
| prEN 4048-2003 |
prEN 4048-2003 |
|
| prEN 4057-100-2001 |
航空航天系列鎧裝用繩索系材試驗方法第100部分：總則 |
Aerospace series - Cable ties for harnesses; Test methods - Part 100: General |
| prEN 4057-201-2001 |
航空航天系列鎧裝用繩索系材試驗方法第201部分：可視檢查／注： EN 4057-100結合使用 |
Aerospace series - Cable ties for harnesses; Test methods - Part 201: Visual examination / Note: Applies in conjunction with EN 4057-100 |
| prEN 4057-202-2001 |
航空航天系列鎧裝用繩索系材試驗方法第202部分：質量和尺寸的檢查／注：與EN 4057-100結合使用 |
Aerospace series - Cable ties for harnesses; Test methods - Part 202: Examination of mass and dimensions / Note: Applies in conjunction with EN 4057-100 |
| prEN 4057-302-2001 |
航空航天系列鎧裝用繩索系材試驗方法第302部分：易燃性／注：與EN 4057-100結合使用 |
Aerospace series - Cable ties for harnesses; Test methods - Part 302: Flammability / Note: Applies in conjunction with EN 4057-100 |
| prEN 4057-303-2001 |
航空航天系列鎧裝用繩索系材試驗方法第303部分：耐流體性／注：與EN 4057-100結合使用 |
Aerospace series - Cable ties for harnesses; Test methods - Part 303: Resistance to fluids / Note: Applies in conjunction with EN 4057-100 |
| prEN 4057-304-2001 |
航空航天系列鎧裝用繩索系材試驗方法第304部分：最高工作溫度下環形抗拉強度／注：與EN 4057-100結合 |
Aerospace series - Cable ties for harnesses; Test methods - Part 304: Loop tensile strength at maximum working temperature / Note: Applies in conjunction with EN 4057-100 |
| prEN 4057-305-2001 |
航空航天系列鎧裝用繩索系材試驗方法第305部分：色牢度／注：與EN 4057-100結合使用 |
Aerospace series - Cable ties for harnesses; Test methods - Part 305: Colour fastness / Note: Applies in conjunction with EN 4057-100 |
| prEN 4057-306-2001 |
航空航天系列鎧裝用繩索系材試驗方法第306部分：熱老化試驗／注：與EN 4057-100結合使用 |
Aerospace series - Cable ties for harnesses; Test methods - Part 306: Heat ageing test / Note: Applies in conjunction with EN 4057-100 |
| prEN 4057-307-2001 |
航空航天系列鎧裝用繩索系材試驗方法第307部分：抗紫外輻射 |
Aerospace series - Cable ties for harnesses; Test methods - Part 307: Resistance to ultra violet radiation |
| prEN 4057-401-2001 |
航空航天系列鎧裝用繩索系材試驗方法第401部分：環形抗拉強度／注：與EN 4057-100結合使用 |
Aerospace series - Cable ties for harnesses; Test methods - Part 401: Loop tensile strength / Note: Applies in conjunction with EN 4057-100 |
| prEN 4057-402-2001 |
航空航天系列鎧裝用繩索系材試驗方法第402部分：壽命周期／注：與EN 4057-100結合使用 |
Aerospace series - Cable ties for harnesses; Test methods - Part 402: Life cycle / Note: Applies in conjunction with EN 4057-100 |
| prEN 4057-404-2001 |
航空航天系列鎧裝用繩索系材試驗方法第404部分：低溫裝置／注：與EN 4057-100結合使用 |
Aerospace series - Cable ties for harnesses; Test methods - Part 404: Low temperature installation / Note: Applies in conjunction with EN 4057-100 |
| prEN 4067-001-1998 |
航空航天系列防火的最高操作溫度為260℃的螺紋式環耦合的防凹口圓電連接器第001部分：技術規范 |
Aerospace series - Connectors, electrical, circular, scoop-proof, coupled by threaded ring, fire-resistant, operating temperature 260℃ peak - Part 001: Technical specification |
| prEN 4067-002-1998 |
航空航天系列防火的最高操作溫度為260℃的螺紋式環耦合的防凹口圓電連接器第002部分：排列性能規范和連 |
Aerospace series - Connectors, electrical, circular, scoop-proof, coupled by threaded ring, fire-resistant, operating temperature 260℃ peak - Part 002: Specification of performance and contact arrangements |
| prEN 4067-003-2000 |
航空航天系列防火的最高操作溫度為260℃的螺紋式環耦合的防凹口圓電連接器第003部分：方法蘭式插座產 |
Aerospace series - Connectors, electrical, circular, scoop-proof, coupled by threaded ring, fire-resistant, operating temperature 260℃ peak - Part 003: Square flange receptacle - Product standard |
| prEN 4067-004-2000 |
航空航天系列防火的最高操作溫度為260℃的螺紋式環耦合的防凹口圓電連接器第004部分：裝鎖緊螺母的插座 |
Aerospace series - Connectors, electrical, circular, scoop-proof, coupled by threaded ring, fire-resistant, operating temperature 260℃ peak - Part 004: Jam-nut mounted receptacle - Product standard |
| prEN 4067-005-2000 |
航空航天系列防火的最高操作溫度為260℃的螺紋式環耦合的防凹口圓電連接器第005部分：密封的方形法蘭式 |
Aerospace series - Connectors, electrical, circular, scoop-proof, coupled by threaded ring, fire-resistant, operating temperature 260℃ peak - Part 005: Hermetic square flange receptacle - Product standard |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com