標準號 |
中文名稱 |
英文名稱 |
| NF E66-612-1983 |
內面拉削刀具.后掛鉤.形狀和尺寸 |
(Internal broaching tools. Tail ends.) |
| NF E66-613-1989 |
內孔拉刀.推力拉刀.W型拉刀端頭尺寸 |
(INTERNAL BROACHING TOOLS. PUSHED BROACHES. DIMENSIONS OF PULL ENDS,SHAPE W.) |
| NF E66-614-1989 |
內孔拉刀.推力掛刀.U型或V型拉刀尾端.尺寸 |
(INTERNAL BROACHING TOOLS. PUSHED BROACHES. DIMENSIONS OF TAIL ENDS,SHAPES U OR V.) |
| NF E66-620-1983 |
拉削刀具.齒圈.形狀和尺寸 |
(BROACHING TOOLS. SHAPES AND DIMENSIONS OF BROACH TEETH.) |
| NF E66-740-1995 |
硬質合金的鐓鍛模.術語 |
(Hardmetal heading dies. Terminology.) |
| NF E71-001-1986 |
錘打和鉚接工具.術語.名稱 |
(TOOLS FOR HAMMERING,HITTING AND RIVETTING. TERMINOLOGY. NOMENCLATURE.) |
| NF E71-002-2000 |
錘子.鋼錘頭技術規范.試驗規程 |
(Hammers - Technical specifications concerning steel hammer heads - Test procedures.) |
| NF E71-011-1976 |
電工錘.尺寸范圍 |
(ELECTRICIAN`S HAMMER. DIMENSIONS.) |
| NF E71-012-1976 |
細木工錘.尺寸范圍 |
(CARPENTER`S HAMMER. DIMENSIONS.) |
| NF E71-013-1976 |
鍛工錘.尺寸范圍 |
(CROSS PANE. DIMENSIONS.) |
| NF E71-014-1976 |
鉗工錘（鉚釘手錘）.尺寸范圍 |
(LOCKSMITH`S HAMMER. DIMENSIONS.) |
| NF E71-015-1976 |
裝配錘.尺寸范圍 |
(TRIMMING HAMMER. DIMENSIONS.) |
| NF E71-100-1983 |
高溫技術推進裝料封焊設備.一般規則 |
(Propellant actuated fixing equipment. General requirements.) |
| NF E71-101-1983 |
高溫技術推進裝料封焊設備.試驗 |
(Propellant actuated fixing equipement. Tests.) |
| NF E71-105-1983 |
封焊、開采和其他相似機械.配接套管.特征 |
(CARTRIDGES FOR WALL SEALING,BLASTING AND SIMILAR APPLIANCES. TECHNICAL CHARACTERISTICS.) |
| NF E71-210-1983 |
機械師用鑿子和扁鏟 |
(Engineer cold chisels and cross-cut chisels.) |
| NF E71-211-1983 |
深釘沖頭（或沖頭）.除銷器.中心沖頭 |
(Taperpunches. Pin punches. Centre punches.) |
| NF E71-212-1983 |
建筑物用沖子和鑿子 |
(Concrete point chisels and mason chisels.) |
| NF E71-213-1986 |
鍛造和有關成套工具.沖子.尺寸.規范 |
(TOOLS FOR HAMMERING,HITTING AND RIVETING. WALL-DRILLS. DIMENSIONS. SPECIFICATIONS.) |
| NF E73-001-1971 |
手用木工直鋸 |
(STRAIGHT HAND SAWS FOR WOODWORKING.) |
| NF E73-010-1984 |
木工帶鋸.齒斷面形狀.術語和名稱 |
(Saw teeth for woodworking saws. Profile shape. Terminology and designation.) |
| NF E73-040-1974 |
木工窄帶鋸.尺寸 |
(Narrow bandsaw blades for woodworking - Dimensions.) |
| NF E73-043-1975 |
通用木工圓鋸 |
(GENERAL PURPOSE CIRCULAR SAWS FOR WOODWORKING.) |
| NF E73-050-1973 |
具有相應比例的冷、橫切割金屬用整體和組裝的圓鋸.傳動互換性尺寸.鋸直徑范圍２２４和２２４０mm |
(Solid and segmental circular saws for cold cutting of metals. Interchangeability dimensions of the drive. Saw diameter range 224 to 2 240 mm.) |
| NF E73-071-1996 |
弓鋸條.第2部分:機鋸條尺寸 |
(Hacksaw blades. Part 2 : dimensions for machines blades.) |
| NF E73-071/A1-1982 |
修改件1 |
() |
| NF E73-072-1982 |
手用金屬直帶鋸刀刃.特性 |
(HAND HACKSAW BLADES. SPECIFICATIONS.) |
| NF E73-073-1983 |
手用金屬直鋸架 |
(FRAMES FOR HAND SAWS FOR METAL.) |
| NF E73-075-1-2003 |
金屬切削帶鋸條.第1部分:定義和術語 |
(Metal cutting band saw blades - Part 1 : definitions - Terminology.) |
| NF E73-075-1980 |
金屬帶鋸刀刃.定義.術語 |
(Metal cutting band saw blades. Definitions and terminology.) |
| NF E73-075-2-2003 |
金屬切削帶鋸條.第2部分:規范.尺寸 |
(Metal cutting band saw blades - Part 2 : specifications - Dimensions.) |
| NF E73-076-1980 |
金屬帶鋸刀刃.規范.尺寸 |
(METAL CUTTING BAND SAW BLADES. SPECIFICATIONS. DIMENSIONS.) |
| NF E73-100-1984 |
夾鉗和虎鉗.多種語言名稱表 |
(Pliers and nippers. Multilingual nomenclature.) |
| NF E73-101-1-1988 |
夾鉗和虎鉗.一般技術規范.試驗方法 |
(PLIERS AND NIPPERS. GENERAL TECHNICAL REQUIREMENTS.) |
| NF E73-101-2-1988 |
夾扭鉗和剪切鉗.試驗方法 |
(PLIERS AND NIPPERS. METHODS OF TESTS.) |
| NF E73-106-1988 |
夾扭鉗和彎切鉗.側切鉗 |
(PLIERS AND NIPPERS. LEVER ASSISTED SIDE CUTTING,END CUTTING AND DIAGONAL CUTTING NIPPERS.) |
| NF E73-108-1988 |
夾扭鉗和剪切鉗.多支點鉗.尺寸和試驗數值 |
(PLIERS AND NIPPERS. MULTIPLE SLIPS JOINT PLIERS. DIMENSIONS AND TEST VALUES.) |
| NF E73-109-1988 |
夾扭鉗和剪切鉗.鯉魚鉗.尺寸和試驗數值 |
(PLIERS AND NIPPERS. SLIP JOINT PLIERS. DIMENSIONS AND TEST VALUES.) |
| NF E73-114-1988 |
夾扭鉗和剪切鉗.木工用鉗.尺寸和試驗數值 |
(PLIERS AND NIPPERS. CARPENTER`S PINCERS. DIMENSIONS AND TEST VALUES.) |
| NF E73-115-1988 |
夾扭鉗和剪切鉗.建筑工用鉗.尺寸和試驗數值 |
(PLIERS AND NIPPERS. CONSTRUCTION WORKER`S PINCERS. DIMENSIONS AND TEST VALUES.) |
| NF E73-116-1988 |
夾扭鉗和剪切鉗.電工鉗.術語 |
(Pliers and nippers. Electronic pliers. Nomenclature.) |
| NF E73-117-1990 |
電工用鉗.通用技術規范 |
(ELECTRONIC PLIERS. GENRAL TECHNICAL REQUIREMENTS.) |
| NF E73-118-1990 |
電工用鉗.試驗方法 |
(ELECTRONIC PLIERS. METHODS OF TEST.) |
| NF E73-119-1990 |
電工用鉗.單一功能的鉗子.夾緊和操作用的鉗子 |
(ELECTRONIC PLIERS. SINGLE PURPOSE NIPPERS. PLIERS FOR GRIPPING AND MANIPULATING.) |
| NF E73-120-1990 |
電工用鉗.單一功能的鉗子.剪切鉗 |
(ELECTRONIC PLIERS. SINGLE PURPOSE NIPPERS. CUTTING NIPPERS.) |
| NF E73-130-1990 |
鉗和夾鉗.彈簧圈用鉗 |
(PLIERS AND NIPPERS. PLIERS FOR RETAINING RINGS.) |
| NF E73-150-1972 |
煤氣管鉗 |
(GASPIPE PLIERS.) |
| NF E73-201-1996 |
木工工具.鑿子和半圓鑿 |
(Woodworking tools. Chisels and gouges.) |
| NF E73-205-1985 |
細木工角尺.帶托的金屬角尺 |
(JOINER`S SQUARES. METALLIC SQUARES WITH STOCK.) |
| NF E73-303-1996 |
木工工具.木體刨 |
(Woodworking tools. Wooden bodied planes.) |
| NF E73-304-1996 |
木工工具.金屬臺刨、刨刀和蓋鐵 |
(Woodworking tools. Metal-bodied bench planes, plane cutters and cap irons.) |
| NF E73-510-1980 |
木材機加工刀具.開槽銑刀.尺寸 |
(MECHANICAL TOOLING FOR WOOD. CUTTERS FOR SLOT. DIMENSIONS.) |
| NF E73-511-1980 |
木材機加工刀具.槽邊銑刀.尺寸 |
(MECHANICAL TOOLING FOR WOOD. CUTTERS FOR RABBET. DIMENSIONS .) |
| NF E73-512-1980 |
木材機加工刀具.叉形榫接銑刀.尺寸 |
(MECHANICAL TOOLING FOR WOOD. CUTTERS FOR FORK. DIMENSIONS.) |
| NF E73-513-1980 |
木材機加工刀具.制榫銑刀.尺寸 |
(MECHANICAL TOOLING FOR WOOD. CUTTERS FOR TENON. DIMENSIONS.) |
| NF E73-514-1980 |
木材機加工刀具.四分之一圓銑刀.尺寸 |
(MECHANICAL TOOLING FOR WOOD. CUTTERS FOR QUARTER ROUND. DIMENSIONS.) |
| NF E73-515-1980 |
木材機加工刀具.凹形線腳銑刀.尺寸 |
(MECHANICAL TOOLING FOR WOOD. CUTTERS FOR ROUNDING GROOVE. DIMENSIONS.) |
| NF E73-516-1980 |
木材機加工刀具.４５°倒角銑刀.尺寸 |
(MECHANICAL TOOLING FOR WOOD. CUTTERS FOR 45 DEGREES CHANFER. DIMENSIONS.) |
| NF E73-520-1997 |
木材加工用刀具的安全要求.第1部分:銑刀和圓鋸鋸齒(歐洲標準EN 847-1) |
(Tools for woodworking. Safety requirements. Part 1 : milling tools and circular saw blades.) |
| NF E73-521-2-2001 |
木工工具.安全要求.第2部分:支架固定銑刀的支架要求 |
(Tools for woodworking - Safety requirements - Part 2 : requirements for the shank of shank mounted milling tools.) |
| NF E74-100-1968 |
鉸刀.切削部分直徑特定公差 |
(REAMERS. SPECIAL TOLERANCES FOR CUTTING DIAMETER.) |
| NF E74-105-1974 |
１／１０錐度的錐形鉸刀 |
(TAPER REAMERS WITH 10 % TAPER.) |
| NF E74-112-1968 |
巴黎型手用圓柱柄鉸刀 |
(HAND REAMERS WITH PARALLEL SHANKS (TYPE “FACON PARIS“).) |
| NF E74-300-1998 |
螺栓和螺母用裝配工具.扳手和套筒扳手的開口.通用公差 |
(Assembly tools for screws and nuts. Wrench and socket openings. Tolerances for general use.) |
| NF E74-303-2001 |
螺釘和螺母組裝工具.鍛造的和管形套筒扳手.頭部外形最大尺寸 |
(Assembly tools for screws and nuts - Forged and tubular socket wrenches - Maximum outside head dimensions.) |
| NF E74-304-2001 |
螺釘和螺母裝配工具.雙頭開口扳手、雙頭環形扳手和多用扳手.端部最大寬度 |
(Assembly tools for screws and nuts - Double-headed open-ended wrenches, double-headed ring wrenches and combination wrenches - Maximum widths of heads.) |
| NF E74-305-2001 |
螺釘和螺母裝配工具.雙頭扳手.尺寸選配 |
(Assembly tools for screws and nuts - Double-ended wrenches - Size pairings.) |
| NF E74-307-2001 |
螺釘和螺母用裝配工具.組合扳手.扳手長度和端口最大厚度 |
(Assembly tools for screws and nuts - Combination wrenches - Lengths of wrenches and maximum thickness of heads.) |
| NF E74-310-2001 |
螺釘和螺母用裝配工具.工程用雙頭開口扳手.扳手長度和端口厚度 |
(Assembly tools for screws and nuts - Double-headed open-ended engineers’ wrenches - Length of wrenches and thickness of the heads.) |
| NF E74-311-2001 |
螺釘和螺母用裝配工具.雙頭平直套筒扳手和斜口套筒扳手.扳手長度和端口厚度 |
(Assembly tools for screws and nuts - Double-headed, flat and offset, box wrenches - Length of wrenches and thickness of the heads.) |
| NF E74-313-2001 |
螺釘和螺母用裝配工具.雙頭深斜口套筒扳手和改進的斜口套筒扳手.扳手長度和端口厚度 |
(Assembly tools for screws and nuts - Double-headed, deep offset and modified offset, box wrenches - Length of wrenches and thickness of the heads.) |
| NF E74-321-1998 |
螺釘和螺母用裝配工具.十字形套筒扳手.尺寸和扭矩試驗 |
(ASSEMBLY TOOLS FOR SCREWS AND NUTS. FOUR-WAY SOCKET WRENCHES. DIMENSIONS AND TORQUE TEST.) |
| NF E74-322-1972 |
螺釘螺帽緊固工具.齒條式扳手 |
(ASSEMBLY TOOLS FOR SCREWS AND NUTS.RACK WRENCHES.) |
| NF E74-323-1972 |
螺釘螺帽緊固工具.開槽螺帽用單鉤扳手 |
(ASSEMBLY TOOLS FOR SCREWS AND NUTS.HOOK WRENCHES) |
| NF E74-324-2001 |
螺釘和螺母用裝配工具.可調扳手 |
(Assembly tools for screws and nuts - Adjustable wrenches.) |
| NF E74-325-2003 |
螺釘和螺母用裝配工具.手動轉矩工具.設計一致性試驗、質量一致性試驗和重新校準程序的要求和試驗方法 |
(Assembly tools for screws and nuts - Hand torque tools - Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure.) |
| NF E74-326-1995 |
火花和點火塞用長套管型套筒扳手 |
(SOCKET WRENCHES FOR SPARK- AND GLOW-PLUGS.) |
| NF E74-331-2003 |
螺釘和螺母用裝配工具.內六角扳手 |
(Assembly tools for screws and nuts - Hexagon socket screw keys.) |
| NF E74-351-2002 |
螺釘和螺母用裝配工具.一字槽頭螺釘用旋具.第2部分:手工操作旋具的一般要求、刀刃長度和標記 |
(Assembly tools for screws and nuts - Screwdrivers for slotted-head screws - Part 2 : general requirements, lengths of blades and marking of hand-operated screwdrivers.) |
| NF E74-352-1998 |
螺釘和螺母用裝配工具.槽螺釘用旋具.第1部分:手工及機械操作用的旋具頭 |
(Assembly tools for screws and nuts. Screwdrivers for slotted-head screws. Part 1 : tips for hand- and machine-operated screwdrivers.) |
| NF E74-353-1-2002 |
螺釘和螺母用裝配工具.機動旋轉頭.第1部分:一字槽螺釘旋具 |
(Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 1 : screwdriver bits for slotted head screws.) |
| NF E74-353-2-2002 |
螺釘和螺母用裝配工具.機動旋轉頭.第2部分:十字槽螺釘旋具頭 |
(Assembly tools for screws and nuts - Machine-operated screwdrivers bits - Part 2 : screwdriver bits for cross-recessed head screws.) |
| NF E74-353-3-2002 |
螺釘和螺母用裝配工具.機動旋轉頭.第3部分:內六角螺釘用旋具頭 |
(Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 3 : screwdriver bits for hexagon socket screws.) |
| NF E74-354-2002 |
螺釘和螺母用裝配工具.螺旋棘輪螺釘旋具頭.尺寸 |
(Assembly tools for screws and nuts - Spiral ratchet screwdriver ends - Dimensions.) |
| NF E74-355-1993 |
十字槽頭螺釘用旋轉具.第1部分:旋具尖 |
(SCREWDRIVERS FOR CROSS-RECESSED HEAD SCREWS. PART 1 : DRIVERS POINTS.) |
| NF E74-356-1993 |
十字槽頭螺釘用旋具.第2部分:手持式旋具的一般要求、旋具頭長度和標記 |
(SCREWDRIVERS FOR CROSS-RECESSED HEAD SCREWS. PART 2 : GENERAL REQUIREMENTS, LENGTHS OF BLADES AND MARKING OF HAND-OPERATED SCREWDRIVERS.) |
| NF E74-360-2001 |
螺釘和螺母用裝配工具.手動和機動螺絲刀的驅動端和連接部件.尺寸和扭矩試驗 |
(Assembly tools for screws and nuts - Drive ends for hand- and machine-operated screwdriver bits and connecting parts - Dimensions, torque testing.) |
| NF E74-361-1997 |
螺釘和螺母用裝配工具.方形旋具.第1部分:手動套筒工具用方形旋具 |
(Assembly tools for screws and nuts. Driving squares. Part 1 : driving squares for hand socket tools.) |
| NF E74-362-1997 |
螺釘和螺母用裝配工具.方形旋具.第2部分:電動套筒工具用方形旋具 |
(Assembly tools for screws and nuts. Driving squares. Part 2 : driving squares for power socket tools.) |
| NF E74-363-1-1997 |
螺釘和螺母用裝配工具.方形傳動套筒.第1部分:手動套筒.尺寸 |
(Assembly tools for screws and nuts. Square drive sockets. Part 1 : hand-operated sockets. Dimensions.) |
| NF E74-363-2-1997 |
螺釘和螺母用裝配工具.方形傳動套筒.第2部分:機動“沖擊“套筒.尺寸 |
(Assembly tools for screws and nuts. Square drive sockets. Part 2 : machine-operated sockets “impact“. Dimensions.) |
| NF E74-363-3-2001 |
螺釘和螺母用組合工具.方形驅動套筒.第3部分:機器驅動套筒(無沖擊).尺寸 |
(Assembly tools for screws and nuts - Square drive sockets - Part 3 : machine-operated sockets (“non impact“) - Dimensions.) |
| NF E74-365-1997 |
螺釘和螺母用裝配工具.手動方形傳動套筒扳手上的傳動件.尺寸和試驗 |
(Assembly tools for screws and nuts. Driving parts for hand-operated square drive socket wrenches. Dimensions and tests.) |
| NF E74-366-1997 |
螺釘和螺母用裝配工具.手動方形傳動套筒扳手上的附件.尺寸和試驗 |
(Assembly tools for screws and nuts. Attachments for hand-operated square drive socket wrenches. Dimensions and tests.) |
| NF E74-367-1995 |
螺釘和螺母用裝配工具.機動插頭扳手的方塊傳動加長六角插頭 |
(Assembly tools for screws and nuts. Square drive extension hexagon insert, for power socket wrenches.) |
| NF E74-381-1997 |
螺釘和螺母用裝配工具.技術規范.第1部分:手動扳手和套筒 |
(Assembly tools for screws and nuts. Technical specifications. Part 1 : hand-operated wrenches and sockets.) |
| NF E75-001-1985 |
鋼銼和銼刀.尺寸 |
(Files and rapes. Dimensions.) |
| NF E75-002-1980 |
鋼銼和銼刀.刀刃特性 |
(Files and repes. Cuit characteristics.) |
| NF E75-070-2002 |
涂磨料產品的安全要求 |
(Safety requirements for coated abrasive products.) |
| NF E75-072-1994 |
砂帶.標識、尺寸和公差 |
(Abrasive belts. Designation, dimensions and tolerances.) |
| NF E75-075-1972 |
圓柱形磨光套管.名稱.尺寸 |
(CYLINDRICAL ABRASIVE SLEEVES.) |
| NF E75-077-1999 |
涂敷磨料.磨料輥筒. |
(Coated abrasive products - Abrasive rolls.) |
| NF E75-082-1976 |
涂層研磨件.帶凸緣的小葉輪.名稱.尺寸 |
(COATED ABRASIVES. FLAP WHEELS WITH INCORPORATE FLANGES OR SEPARATE FLANGES. DESIGNATION. DIMENSIONS.) |
| NF E75-084-2001 |
覆層磨料.第1部分:平板 |
(Coated abrasives - Part 1 : plain sheets.) |
| NF E75-085-2001 |
覆層磨料.第2部分:萃取塵埃用帶孔磨料板 |
(Coated abrasives - Part 2 : abrasive sheets with holes dust extraction.) |
| NF E75-086-2001 |
涂覆磨料.風門盤 |
(Coated abrasives - Flap discs.) |
| NF E75-087-2003 |
涂覆磨料.硫化纖維砂輪 |
(Coated abrasives - Vulcanized-fibre discs.) |
| NF E75-088-2001 |
覆層磨料.第1部分:普通圓盤 |
(Coated abrasives - Part 1 : plain discs.) |
| NF E75-089-2001 |
覆層磨料.萃取塵埃用帶孔普通圓盤 |
(Coated abrasives - Plain discs with holes for dust extraction.) |
| NF E75-100-2001 |
涂覆磨料.磨粒尺寸分析.第1部分:磨粒尺寸分布試驗 |
(Coated abrasives - Grain size analysis - Part1 : grain size distribution test.) |
| NF E75-101-2001 |
涂覆磨料.磨粒尺寸分析.第2部分:最大磨粒為P12-P220的磨粒尺寸分布測定 |
(Coated abrasives - Grain size analysis - Part 2 : determination of grain size distribution of macrogrits P12 to P220.) |
| NF E75-102-2001 |
涂覆磨料.磨粒尺寸分析.第3部分:最小磨粒為P240-P2500的磨粒尺寸分布測定 |
(Coated abrasives - Grain size analysis - Part 3 : determination of grain size distribution of microgrits P240 to P2500.) |
| NF E75-200-1985 |
粘結研磨件.砂輪的靜止平衡.允許偏斜.規范.檢驗 |
(BONDED ABRASIVE PRODUCTS. STATIC BALANCING OF GRINDING WHEELS. PERMISSIBLE UNBALANCE. SPECIFICATION. INSPECTION.) |
| NF E75-201-1985 |
粘結研磨件.總則.名稱，標記.外徑范圍.公差 |
(BONDED ABRASIVE PRODUCTS. GENERAL FEATURES : DESIGNATION. MARKING. RANGE OF EXTERNAL DIAMETERS. TOLERANCES.) |
| NF E75-202-1986 |
粘結研磨件.毛刺砂輪.名稱.尺寸.規范 |
(BONDED ABRASIVE PRODUCTS. SNAGGING WHEELS. DESIGNATION. DIMENSIONS. SPECIFICATIONS.) |
| NF E75-203-1989 |
粘結研磨件.修整砂輪 |
(BONDED ABRASIVE PRODUCTS. GRINDING WHEELS. DESIGNATION. DIMENSIONS. SPECIFICATIONS.) |
| NF E75-204-1991 |
粘結磨件.磨刃砂輪.名稱.尺寸.規范 |
(BONDED ABRASIVE PRODUCTS. GRINDING WHEELS. DESIGNATION. DIMENSIONS. SPECIFICATIONS.) |
| NF E75-205-1984 |
粘結研磨件.切割砂輪 |
(BONDED ABRASIVE PRODUCTS. CUTTING-OFF WHEELS.) |
| NF E75-206-1987 |
粘結研磨件.桿柄砂輪.５２型.名稱.尺寸和規范 |
(Bonded abrasive products. Mounted wheels - Type 52. Designation. Dimensions and specifications.) |
| NF E75-208-1982 |
粘結研磨件.機械固定干面砂輪和粘著干面輪.尺寸和公差 |
(BONDED ABRASIVE PRODUCTS. MECHANICAL LOCKED OR FITTED LAPIDARY GRINDING WHEELS. DIMENSIONS AND TOLERANCES.) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com