標準號 |
中文名稱 |
英文名稱 |
| NF C23-577-1998 |
易燃涂料粉用自動靜電噴霧裝置 |
(AUTOMATIC ELECTROSTATIC SPRAYING INSTALLATIONS FOR FLAMMABLE COATING POWDER. (EUROPEAN STANDARD EN 50 177).) |
| NF C23-579-10-2003 |
爆炸性氣體環境用電氣設備.第10部分:危險場所的分類 |
(Electrical apparatus for explosive gas atmospheres - Part 10 : classification of hazardous areas.) |
| NF C23-579-14-1999 |
爆炸氣體環境用電氣設備.第14部分:危險區(礦井除外)的電氣設備 |
(Electrical apparatus for explosive gas atmospheres. Part 14 : electrical installations in hazardous areas (other than mines).) |
| NF C23-579-17-2003 |
爆炸性氣體環境用電氣設備.第17部分:危險場所(礦井除外)電氣設備的檢驗和維護 |
(Electrical apparatus for explosive gas atmospheres - Part 17 : inspection and maintenance of electrical installations in hazardous areas (other than mines).) |
| NF C23-581-1-1-2000 |
用于存在易燃灰塵的電氣裝置.第1-1部分:由外殼保護的電氣裝置.組裝和試驗 |
(Electrical apparatus for use in the presence of combustible dust - Part 1-1 : electrical apparatus protected by enclosures - Construction and testing.) |
| NF C23-581-1-1/A1-2003 |
易燃粉塵區用電氣設備.第1-1部分:用外殼保護的電氣設備.結構和檢驗 |
(Electrical apparatus for use in the presence of combustible dust - Part 1-1: electrical apparatus protected by enclosures - Construction and testing.) |
| NF C23-581-1-2-2000 |
用于存在易燃灰塵的電氣裝置.第1-2部分:由外殼保護的電氣裝置.選擇,安裝和維修 |
(Electrical apparatus for use in the presence of combustible dust - Part 1-2 : electrical apparatus protected by enclosures - Selection, installation and maintenance.) |
| NF C23-581-1-2/A1-2003 |
易燃粉塵區用電氣設備.第1-2部分:用外殼保護的電氣設備.選擇、安裝和維護 |
(Electrical apparatus for use in the presence of combustible dust - Part 1-2: electrical apparatus protected by enclosures - Selection, installation and maintenance.) |
| NF C23-581-2-1-2000 |
用于存在易燃灰塵的電氣裝置.第2-1部分:試驗方法.測定灰塵最低燃燒溫度的試驗方法 |
(Electrical apparatus for use in the presence of combustible dust - Part 2-1 : test methods - Methods for determining the minimum ignition temperatures of dust.) |
| NF C23-581-3-2002 |
存在可燃性塵埃時使用的電氣設備.第3部分:存在或可能存在可燃性塵埃的地區分類 |
(Equipment for use in the presence of combustible dust - Part 3 : classification of areas where combustible dusts are or may be present.) |
| NF C23-584-2000 |
II組1G類設備的電工儀器的結構、試驗和標記的特殊要求 |
(Special requirements for construction, test and marking of electrical apparatus of equipment group II, Category 1G.) |
| NF C23-591-2002 |
檢測家庭住所中的一氧化碳的電氣設備.試驗方法和性能要求 |
(Electrical apparatus for the detection of carbon monoxide in domestic premises - Test methods and performance requirements.) |
| NF C23-594-2000 |
家用易燃?xì)怏w監測用電氣設備.試驗方法和性能要求 |
(Electrical apparatus for the detection of combustibe gases in domestic premises - Test methods and performance requirements.) |
| NF C26-011-1-2003 |
絕緣材料.電工用工業剛性模制矩形和六邊形橫截面的熱固性樹脂基層壓管材和棒材.第1部分:定義、名稱與符號和 |
(Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes - Part 1 : definitions, des) |
| NF C26-111-2003 |
云母基絕緣材料規范.第1部分:定義和一般要求 |
(Specification for insulating materials based on mica - Part 1 : definitions and general requirements.) |
| NF C26-112-1997 |
云母基絕緣材料規范.第2部分:試驗方法 |
(Specification for insuslating materials based on mica. Part 2 : methods of test.) |
| NF C26-113-1-1995 |
云母基絕緣材料規范.第3部分:單項材料規范.第1活頁:換向器隔板和材料 |
(Specification for insulating materials based on mica. Part 3 : specifications for individual materials. Sheet 1 : commutator separators and materials.) |
| NF C26-113-2-1995 |
云母基絕緣材料規范.第3部分:單一材料規范.第2活頁:云母紙 |
(Specification for insulating materials based on mica. Part 3 : specifications for individual materials. Sheet 2 : mica paper.) |
| NF C26-113-3-1995 |
云母基絕緣材料規范.第3部分:單項材料規范.第3活頁:加熱設備用硬質云母材料 |
(Specification for insulating materials based on mica. Part 3 : specifications for individual materials. Sheet 3 : specification for rigid mica materials for heating equipment.) |
| NF C26-113-4-1995 |
云母基絕緣材料規范.第3部分:單項材料規范.第4活頁:用B級環氧樹脂粘合劑粘結的聚酯薄膜襯底云母紙 |
(Specification for insulating materials based on mica. Part 3 : specifications for individual materials. Sheet 4 : polyester film-backed mica paper with a B-stage epoxy resin binder.) |
| NF C26-113-5-1995 |
云母基絕緣材料規范.第3部分:單項材料規范.第5活頁:用環氧樹脂粘合劑粘結的待浸漬處理的玻璃纖維織物襯底云 |
(Specification for insulating materials based on mica. Part 3 : specificatins for individual materials. Sheet 5 : glass-backed mica paper with an epoxy resin binder for post-impregnation (vpi).) |
| NF C26-113-6-1995 |
云母基絕緣材料規范.第3部分:單項材料規范.第6活頁:用B級環氧樹脂粘合劑粘結的玻璃纖維織物襯底云母紙 |
(Specification for insulating materials based on mica. Part 3 : specifications for individual materials. Sheet 6 : glass-backed mica paper with a B-stage epoxy resin binder.) |
| NF C26-113-7-1996 |
云母基絕緣材料規范.第3部分:單項材料規范.第7活頁:單導體膠帶用帶環氧樹脂粘結劑的聚酯薄膜云母紙 |
(Insulating materials based on mica. Part 3 : specification of individual materials. Sheet 7 : polyester film mica paper with an expoxy resin binder for single conductor taping.) |
| NF C26-113-8-1996 |
云母基絕緣材料規范.第3部分:單項材料規范.第8活頁:抗燃安全電纜用云母紙帶 |
(Insulating materials based on mica. Part 3 : specifications for individual materials. Sheet 8 : mica paper tapes for flame-resistant security cables.) |
| NF C26-113-9-1996 |
云母基絕緣材料規范.第3部分:單項材料規范.第9活頁:單項材料規范.第9活頁:壓制膠合云母板 |
(Insulating materials based on mica. Part 3 : specification for individual materials. Sheet 9 : moulding micanite.) |
| NF C26-121-1971 |
固體絕緣材料.云母基制品.選型件.規則 |
(SOLID INSULATING MATERIALS. MICACEOUS PRODUCTS - MOULDED PARTS. REQUIREMENTS.) |
| NF C26-122-1971 |
固體絕緣材料.成卷云母基制品.規范 |
(SOLID INSULATING MATERIALS. MICACEOUS PRODUCTS IN ROLLS. SPECIFICATIONS.) |
| NF C26-125-1972 |
固體絕緣材料.軟云母基制品.規范 |
(SOLID INSULATING MATERIALS. FLEXIBLE MICA PRODUCTS. SPECIFICATION.) |
| NF C26-131-1-1995 |
電工用紙板和厚紙板規范.第1部分:定義和一般要求(歐洲標準EN 60 641-1) |
(Specifications for pressboard and presspaper for electrical purposes. Part 1 : definitions and general requirements.) |
| NF C26-131-2-1996 |
電工用壓紙板和厚紙板規范.第2部分:試驗方法 |
(Specification for pressboard and presspaper for electrical purposes. Part 2 : methods of test.) |
| NF C26-132-1-1996 |
層壓板規范.第1部分:定義、分類和一般要求 |
(Specification for laminated pressboard. Part 1 : definitions, classification and general requirements.) |
| NF C26-132-2-1996 |
層壓板規范.第2部分:試驗方法 |
(Specification for laminated pressboard. Part 2 : methods of test.) |
| NF C26-132-3-1-1996 |
層壓板規范.第3部分:各種材料規范.活頁1:預壓層壓板規范.型號LB 3.1.1,3.1.2,3.3.1和3.3.2 |
(Specification for laminated pressboard. Part 3 : specifications for individual materials. Sheet 1 : specifications for laminated precompressed board. Types LB 3.1.1, 3.1.2, 3.3.1 and 3.3.2.) |
| NF C26-133-1-1994 |
電工用壓紙板和厚紙板.第3部分:個別材料規范.第1活頁:B.01、B.2.1、B.2.3、B.3.1、B.3.3、B.4.1、B.4.3、B. |
(Specification for pressboard and presspaper for electrical purposes. Part 3 : specifications for individual materials. Sheet 1 : requirements for pressboard, types B.O.1, B.2.1, B.2.3, B.3.1, B.3.3, B.4.1, B.4.3, B.5.1, B.6.1 and B.7.1.) |
| NF C26-133-2-1994 |
電工用壓紙板和厚紙板.第3部分:個別材料規范.第2活頁:P.2.1、P.4.1、P.4.2、P.4.3、P.6.1和P.7.1型厚紙板的 |
(Specification for pressboard and presspaper for electrical purposes. Part 3 : specifications for individual materials. Sheet 2 : requirements for presspaper, type P.2.1, P.4.1, P.4.2, P.4.3, P.6.1 and P.7.1.) |
| NF C26-136-1-1998 |
電氣用途的波紋狀壓力板和壓力紙板.定義,標記和一般要求 |
(Corrugated pressboard and presspaper for electrical purposes. Part 1 : definitions, designations and general requirements.) |
| NF C26-136-2-1999 |
電工用波紋紙板和紙板.第2部分:試驗方法 |
(Corrugated pressboard and presspaper for electrical purposes. Part 2 : methods of test.) |
| NF C26-137-1-1997 |
電工用芳族壓板.第1部分:定義、名稱與符號和總要求 |
(Aramid pressboard for electrical purposes. Part 1 : definitions, designations and general requirements.) |
| NF C26-137-2-1997 |
電工用芳族厚紙板.第2部分:試驗方法(歐洲標準EN 61 629-1) |
(Aramid pressboard for electrical purposes. Part 2 : methods of test.) |
| NF C26-144-1-1995 |
電絕緣用復合柔性材料.第1部分:定義和一般要求 |
(Combined flexible materials for electrical insulation. Part 1 : definitions and general requirements.) |
| NF C26-144-1/A1-1997 |
NF EN 60626-1-1995的修改1 |
() |
| NF C26-144-2-1996 |
電氣絕緣用復合柔軟材料規范.第2部分:試驗方法(歐洲標準EN 60 626-2) |
(Combined flexible materials for electrical insulation. Part 2 : methods of test.) |
| NF C26-144-3-1997 |
電絕緣用復合柔性材料.第2部分:單項材料規范 |
(Combined flexible materials for electrical insulation - Part 3 : specifications for individual materials.) |
| NF C26-144-3/A1-1999 |
電絕緣用復合柔性材料.第3部分:單項材料規范 |
(Combined flexible materials for electrical insulation - Part 3 : specifications for individual materials.) |
| NF C26-145-1-1998 |
電氣應用的塑料膜的規范.第1部分:定義和一般要求 |
(Specification for plastic films for electrical purposes. Part 1 : definitions and general requirements.) |
| NF C26-145-2-1998 |
電器用塑料薄膜規范.第2部分:試驗方法 |
(Specification for plastic films for electrical purposes. Part 2 : methods of test.) |
| NF C26-145-2/A1-2002 |
電器用塑料薄膜規范.第2部分:試驗方法 |
(Specification for plastic films for electrical purposes - Part 2 : methods of test.) |
| NF C26-145-3-1-1998 |
電工用塑料薄膜.第3部分:單項材料規范.第1活頁:電容器用雙軸取向聚丙烯(PP)薄膜 |
(Plastic films for electrical purposes. Part 3 : specifications for individual materials. Sheet 1 : biaxially oriented polypropylene (PP) film for capacitors.) |
| NF C26-145-3-2-1998 |
電氣應用的塑料膜的規范.第3部分:個體材料規范.第2章:用于電氣絕緣的平衡雙軸定向PEP薄膜的要求 |
(Specification for plastic films for electrical purposes. Part 3 : specifications for individual materials. Sheet 2 : requirements for balanced biaxially oriented polyethylene terephtalate (PET) films used for electrical insulation.) |
| NF C26-145-3-3-1998 |
電器用途塑料膜規范.第3部分:個別材料規范.第3章:電氣絕緣用PC膜要求 |
(Specification for plastic films for electrical purposes. Part 3 : specifications for individual materials. Sheet 3 : requirements for polycarbonate (PC) films used for electrical insulation.) |
| NF C26-145-3-4-1995 |
電工用塑料薄膜規范.第3部分:各別材料規范.第4-6活頁:電絕緣用聚酰亞胺薄膜要求 |
(Specification for plastic films for electrical purposes. Part 3 : specifications for individual materials. Sheets 4 to 6 : requirements for polyimide films used for electrical insulation.) |
| NF C26-145-3-7-1998 |
電氣用塑料膜規范.第3部分:個體材料規范.第7章:電氣絕緣用FEP膜的要求 |
(Specification for plastic films for electrical purposes. Part 3 : specifications for individual materials. Sheet 7 : requirements for fluoroethylene-propylene (FEP) films used for electrical insulation.) |
| NF C26-146-1994 |
電氣用壓感膠紙帶.第1部分:一般要求 |
(Specifications for pressure-sensitive adhesive tapes for electrical purposes. Part 1 : general requirements.) |
| NF C26-147-1995 |
電氣用途壓敏粘結帶的規范.第2部分:試驗方法 |
(Specification for pressure-sensitive adhesive tapes for electrical purposes. Part 2 : methods of test.) |
| NF C26-148-1-1998 |
電氣用壓力敏感粘接帶.第3部分:個體材料規范.第1節:帶壓力敏感粘接的PVC膜帶 |
(Pressure-sensitive adhesive tapes for electrical purposes. Part 3 : specifications for individual materials. Sheet 1 : PVC film tapes with pressure-sensitive adhesive.) |
| NF C26-148-10-1996 |
電工用壓敏粘帶規范.第3部分:單項材料規范.第10活頁:帶有橡膠熱固性膠的乙酸丁酸薄膜膠粘帶的要求 |
(Pressure-sensitive adhesive tapes for electrical purposes. Part 3 : specifications for individual materials. Sheet 10 : requirements for cellulose-acetate-butyrate film tapes with rubber thermosetting adhesive.) |
| NF C26-148-11-1998 |
電工用壓敏膠粘帶.第3部分:單項材料規范.第11活頁:纖維素質縐紋紙和帶有橡膠熱固膠粘劑的聚對苯二甲酸乙酯 |
(Pressure-sensitive adhesive tapes for electrical purposes. Part 3 : specifications for individual materials. Sheet 11 : combined tapes made of creped cellulosic paper and polyethylene terephthalate film with rubber thermosetting adhesive.) |
| NF C26-148-12-1998 |
電工用壓敏膠粘帶.第3部分:單項材料規范.第12活頁:帶有壓敏膠粘劑的聚乙烯薄膜膠粘帶 |
(Pressure-sensitive adhesive tapes for electrical purposes. Part 3 : specifications for individual materials. Sheet 12 : polyethylene film tapes with pressure-sensitive adhesive.) |
| NF C26-148-13-1996 |
電工用壓敏粘帶規范.第3部分:單項材料規范.第13活頁:一側涂覆熱塑材料、另一側帶有橡膠制熱固性膠的結合纖 |
() |
| NF C26-148-16-2003 |
電工用壓敏膠粘帶.第3部分:單項材料規范.活頁16:涂壓敏粘合劑的聚酯薄膜/玻璃長絲復合帶 |
(Pressure-sensitive adhesive tapes for electrical purposes - Part 3 : specifications for individual materials - Sheet 16 : polyester film/glass filament combinations with pressure-sensitive adhesive.) |
| NF C26-148-18-2003 |
電工用壓敏膠粘帶.第3部分:單項材料規范.活頁18:涂壓敏粘合劑的聚丙烯薄膜膠粘帶 |
(Pressure-sensitive adhesive tapes for electrical purposes - Part 3 : specifications for individual materials - Sheet 18 : polypropylene film tapes with pressure-sensitive adhesive.) |
| NF C26-148-19-2003 |
電工用壓敏膠粘帶.第3部分:單項材料規范.活頁19:兩面涂壓敏粘合劑的各種襯料制膠粘帶 |
(Pressure-sensitive adhesive tapes for electrical purposes - Part 3 : specifications for individual materials - Sheet 19 : tapes made from various backing materials with pressure-sensitive adhesive on) |
| NF C26-148-2-1998 |
電器用途塑料膜規范.第3部分:個別材料規范.第2章:丙烯酸交叉鏈接橡膠熱固聚酯膜帶 |
(Pressure-sensitive adhesive tapes for electrical purposes. Part 3 : specifications for individual materials. Sheet 2 : polyester films tapes with rubber thermosetting of acrylic crosslinked adhesives.) |
| NF C26-148-3-1998 |
電氣用壓力敏感粘接帶.第3部分:個體材料規范.第3節:帶橡膠熱固粘接的聚合物膜帶 |
(Pressure-sensitive adhesive tapes for electrical purposes. Part 3 : specifications for individual materials. Sheet 3 : polyester film tapes rubber thermoplastic adhesive.) |
| NF C26-148-4-1998 |
電氣用壓力敏感粘接帶.第3部分:個體材料規范.第4節:帶橡膠熱塑粘接的,皺折的,纖維素紙 |
(Pressure-sensitive adhesive tapes for electrical purposes. Part 3 : specifications for individual materials. Sheet 4 : cellulosic paper, creped, with rubber thermosetting adhesive.) |
| NF C26-148-5-1998 |
電氣用壓力敏感粘接帶.第3部分:個體材料規范.第5節:帶橡膠熱塑粘接的,非皺折的,纖維素紙 |
(Pressure-sensitive adhesive tapes for electrical purposes. Part 3 : specifications for individual materials. Sheet 5 : cellulosic paper, non creped, with rubber thermosetting adhesive.) |
| NF C26-148-6-1998 |
電氣用壓力敏感粘接帶.第3部分:個體材料規范.第6節:帶丙烯酸樹脂熱塑粘接的多聚碳膜 |
(Pressure-sensitive adhesive tapes for electrical purposes. Part 3 : specifications for individual materials. Sheet 6 : polycarbonate film tapes with acrylic thermoplastic adhesive.) |
| NF C26-148-7-1998 |
電工用壓敏膠粘帶.第3部分:單項材料規范.第7活頁:帶有壓敏膠粘劑的聚酰亞胺薄膜膠粘帶 |
(Pressure-sensitive adhesive tapes for electrical purposes. Part 3 : specifications for individual materials. Sheet 7 : polyimide film tapes with pressure-sensitive adhesive.) |
| NF C26-148-8-1998 |
電工用壓敏膠粘帶.第3部分:單項材料規范.第8節:帶有壓敏膠粘劑的玻璃纖維 |
(Pressure-sensitive adhesive tapes for electrical purposes. Part 3 : specifications for individual materials. Sheet 8 : glass fabric with pressure-sensitive adhesive.) |
| NF C26-148-9-1998 |
電工用壓敏膠粘帶.第3部分:單項材料規范.第9活頁:帶有橡膠熱固膠粘劑的纖維素醋酸紡織纖維帶 |
(Pressure-sensitive adhesive tapes for electrical purposes. Part 3 : specifications for individual materials. Sheet 9 : cellulose acetate woven fabric tapes with rubber thermosetting adhesive.) |
| NF C26-155-1997 |
玻璃和玻璃聚酯纖維機織帶的規范.第1部分:定義、分類和總要求 |
(Specification for glass and glass polyester fibre woven tapes. Part 1 : definitions, classification and general requirements.) |
| NF C26-156-1997 |
玻璃和玻璃聚酯纖維機織帶的規范.第2部分:試驗方法 |
(Specification for glass and glass polyester fibre woven tapes. Part 2 : methods of test.) |
| NF C26-157-1-1995 |
玻璃和玻璃聚酯纖維機織帶的規范.第3部分:專用材料規范.第1活頁:1,2,3型織帶 |
(Glass and glass polyester fibre woven tapes. Part 3 : specifications for individual materials. Sheet 1 : types 1, 2 and 3 tapes.) |
| NF C26-158-1-1998 |
聚酯纖維機織帶規范.第1部分:定義、名稱與符號和一般要求 |
(Specification for polyester fibre woven tapes. Part 1 : definitions, designation and general requirements.) |
| NF C26-158-2-1998 |
聚酯纖維機織帶規范.第2部分:試驗的方法 |
(Specification for polyester fibre woven tapes. Part 2 : methods of test.) |
| NF C26-158-3-1-1995 |
聚酯纖維機織帶.第3部分:專用材料規范.第1活頁:常規的或無梭織機編織帶 |
(Polyester fibre woven tapes. Part 3 : specifications for individual materials. Sheet 1 : tapes woven on conventional or shuttleless looms.) |
| NF C26-160/A3-1986 |
NF C 26-160-1985的補充3 |
() |
| NF C26-161-1999 |
電絕緣用樹脂基活性化合物.第1部分:定義和一般要求(EN 60455-1) |
(Resin based reactive compounds used for electrical insulation. Part 1 : definitions and general requirements.) |
| NF C26-162-1999 |
電絕緣用的樹脂類化合物.第2部分:試驗方法 |
(Resin based reactive compounds used for electrical insulation. Part 2 : methods of test.) |
| NF C26-163-1-2003 |
電氣絕緣用樹脂基反應性化合物.第3部分:單項材料規范.第1活頁:未加填料的環氧樹脂化合物 |
(Resin based reactive compounds used for electrical insulation - Part 3 : specifications for individual materials - Sheet 1 : unfilled epoxy resinous compounds.) |
| NF C26-163-11-1993 |
電氣絕緣用無溶劑可聚合樹脂化合物規范.第3部分:單項材料規范.第11活頁:環氧樹脂基粉末涂料 |
(Specification for solventless polymerisable resinous compouds used for electrical insulation. Part 3 : specifications for individual materials. Sheet 11 : epoxy resin-based coating powders.) |
| NF C26-163-2-2003 |
電氣絕緣用樹脂基反應性化合物.第3部分:單項材料規范.第2活頁:石英填充的環氧樹脂化合物 |
(Resin based reactive compounds used for electrical insulation - Part 3 : specifications for individual materials - Sheet 2 : quartz filled epoxy resinous compounds.) |
| NF C26-163-3-2003 |
電氣絕緣用樹脂基反應性化合物.第3部分:單項材料規范.第3活頁:未加填料的聚氨酯化合物 |
(Resin based reactive compounds used for electrical insulation - Part 3 : specifications for individual materials - Sheet 3 : unfilled polyurethane compounds.) |
| NF C26-163-4-2003 |
電氣絕緣用樹脂基反應性化合物.第3部分:單項材料規范.第4活頁:加填料的聚氨酯化合物 |
(Resin based reactive compounds used for electrical insulation - Part 3 : specifications for individual materials - Sheet 4 : filled polyurethane compounds.) |
| NF C26-163-5-1993 |
電氣絕緣用無溶劑可聚合樹脂化合物規范.第3部分:單項材料規范.第5活頁:不飽和聚酯填充性樹脂 |
(Specification for solventless polymerisable resinous compouds used for electrical insulation. Part 3 : specifications for individual materials. Sheet 5 : unsaturated polyester impregnating resins.) |
| NF C26-167-1996 |
電氣用基于熱固性樹脂的工業硬質圓形層壓管和棒材.第2部分:試驗方法 |
(Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Part 2 : methods of test.) |
| NF C26-168-1-1995 |
電工用工業剛性圓熱固樹脂層壓管和棒材-第3部分:專用材料規范-活頁1:圓層壓軋制管 |
(Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Part 3 : specifications for indivudual materials. Sheet 1 : round laminated rolled tubes.) |
| NF C26-168-2-1995 |
電工用工業剛性圓熱固樹脂層壓管和棒材-第3部分:專用材料規范-活頁2:圓層壓壓制管 |
(Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Part 3 : specifications for individual materials. Sheet 2 : round laminated moulded tubes.) |
| NF C26-168-3-1995 |
電工用工業剛性圓熱固樹脂層壓管和棒材-第3部分:專用材料規范-活頁3:圓層壓壓制桿 |
(Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Part 3 : specifications for individual materials. Sheet 3 : round laminated moulded rods.) |
| NF C26-170-1984 |
固體絕緣材料.電氣用剛紙.一般要求 |
(Solid insulating materials. Vulcanized fibre for electrical purposes. General requirements.) |
| NF C26-170/A1-1987 |
NF C 26-170-1984的補充1 |
() |
| NF C26-1701-1987 |
C26-170-84聽補充1 |
() |
| NF C26-175-1998 |
電氣用途的非浸漬增加密度的層狀木材.第1部分:定義,標識和一般要求 |
(Non-impregnated densified laminated wood for electrical purposes. Part 1 : definitions, designation and general requirements.) |
| NF C26-176-2002 |
電氣設備用非浸漬致密層壓板規范.第2部分:試驗方法 |
(Specifications for non-impregnated, densified laminated wood for electrical purposes - Part 2 : methods of test.) |
| NF C26-177-1-1999 |
電氣用途的非浸漬增加密度的層狀木材.第3部分:單項材料規范.第1節:山毛櫸板制產品 |
(Non-impregnated densified laminated wood for electrical purposes. Part 3 : specifications for individual materials. Sheet 1 : sheets produced from beech veneer.) |
| NF C26-177-2-2002 |
電氣設備用非浸漬致密層壓板規范.第3部分:單項材料規范.表2:由毛櫸木薄板制成的圓材 |
(Non-impregnated densified laminated wood for electrical purposes - Part 3 : specifications for individual materials - Sheet 2 : rings produced from beech veneer.) |
| NF C26-181-1994 |
以熱固性樹脂為基的電工用工業剛性層壓板規范.第1部分:定義、標記和一般要求 |
(Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Part 1 : definitions, designations and general requirements.) |
| NF C26-182-1994 |
電氣用基于熱固性樹脂的工業硬質層壓板材規范.第2部分:試驗方法 |
(Specification for industrial rigide laminated sheets based on thermosetting resins for electrical purposes. Part 2 : methods of test.) |
| NF C26-183-1-1994 |
電工用熱固性樹脂基工業剛性層壓板規范.第3部分:單項材料規范.第1篇:工業剛性層壓板的型號 |
(Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Part 3 : specifications for individual materials. Sheet 1 : types of industrial rigid laminated sheets.) |
| NF C26-183-1/A1-1997 |
NF EN 60893-3-1-1994的修改1 |
() |
| NF C26-183-11-1997 |
NF C26-183-1-1994的補充件1 |
() |
| NF C26-183-2-1995 |
電工用熱固性樹脂基工業剛性層壓板規范.第3部分:單項材料規范.第2篇:環氧樹脂基剛性層壓板的要求 |
(Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3 : specifications for individual materials - Sheet 2 : requirements for rigid laminated sheets based on epoxyde resins.) |
| NF C26-183-2/A1-2000 |
電氣工業用熱固性樹脂基的剛性層壓薄板規范.第3部分:單項材料規范.第2節:環氧樹脂基的剛性層壓薄板要求 |
(Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3 : specifications for individual materials - Sheet 2 : requirements for rigid laminate) |
| NF C26-183-3-1995 |
電工用熱固性樹脂基工業剛性層壓板規范.第3部分:各種材料規范.第3活頁:密胺樹脂基剛性層壓板的要求 |
(Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Part 3 : specifications for individual materials. Sheet 3 : requirements for rigid laminated sheets based on melamine resins.) |
| NF C26-183-4-1995 |
電工用熱固性樹脂基工業剛性層壓板規范.第3部分:各種材料規范.第4活頁:酚醛樹脂基剛性層壓板的要求 |
(Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Part 3 : specifications for individual materials. Sheet 4 : requirements for rigid laminated sheets based on phenolic resins.) |
| NF C26-183-5-1995 |
電工用熱固性樹脂基工業剛性層壓板規范.第3部分:各種材料規范.第5活頁:聚酯樹脂基剛性壓板的要求 |
(Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Part 3 : specifications for individual materials. Sheet 5 : requirements for rigid laminated sheets based on polyester resins.) |
| NF C26-183-6-1995 |
電工用熱固性樹脂基工業剛性層壓板規范.第3部分:各種材料規范.第6活頁:硅氧烷樹脂基剛性層壓板的要求 |
(Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Part 3 : specifications for individual materials. Sheet 6 : requirements for rigid laminated sheets based on silicone resins.) |
| NF C26-183-7-1995 |
電工用熱固性樹脂基工業剛性層壓板規范.第3部分:專用材料規范規范.第7活頁:聚酰亞胺樹脂基剛性層壓板的要求 |
(Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Part 3 : specifications for individual materials. Sheet 7 : requirements for rigid laminated sheets based on polyimide resins.) |
| NF C26-191-1995 |
電工用工業剛性圓熱固樹脂層壓管和棒材 |
(Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Part 1 : general requirements.) |
| NF C26-197-2003 |
電工用纖維素紙.第2部分：試驗方法 |
(Cellulosic papers for electrical purposes - Part 2 : methods of test.) |
| NF C26-200-1973 |
絕緣材料試驗方法.電氣絕緣材料在試驗前和試驗中應遵循的條件 |
(Methods of testing insulating materials. Standard conditions for usterials.) |
| NF C26-202-1975 |
絕緣材料.老化試驗數據的統計分析 |
(Insulating materials statistical analysis of ageing test data.) |
| NF C26-203-1985 |
試驗方法.用繞管法評價軟片型絕緣材料耐熱性的試驗方法 |
(Test method for evaluating thermal endurance of flexible sheet materials using the wrappel tube method.) |
| NF C26-205-1993 |
測定電絕緣液體玻璃化轉變溫度的試驗方法 |
(Methods of test for the determination of the galss transition temperature of electrical insulationg liquids.) |
| NF C26-206-1985 |
電氣隔熱的評價和分類 |
(Thermal evaluation and classification of electrical insulation.) |
| NF C26-207-2000 |
電氣絕緣系統的評估和質量檢定 |
(Evaluation and qualification of electrical insulation systems.) |
| NF C26-209-1985 |
制訂評價電氣絕緣系統耐熱性的試驗方法指南 |
(Guide for the preparation of test procedures for evaluating the thermal endurance of electrical insulation systems.) |
| NF C26-212-1989 |
測定暴露于電熱金屬線源時固體電絕緣材料可燃性的試驗方法. |
(Methods of test for the determination of the ignitability of solid electrical insulating materials when exposed to electrically heated wire sources.) |
| NF C26-212/A1-1992 |
NF C 26-212-1989的補充1 |
() |
| NF C26-2121-1992 |
NF C26-212-1989的補充件1 |
() |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com