標準號 |
中文名稱 |
英文名稱 |
| NF E66-077-1975 |
攻絲導孔圓柱柄分級鉆 |
(SUBLAND TWIST DRILLS WITH PARALLEL SHANKS FOR HOLES PRIOR TO TAPPING SCREW THREADS.) |
| NF E66-078-1975 |
攻絲導孔莫氏錐柄分級鉆 |
(SUBLAND TWIST DRILLS WITH MORSE TAPER SHANKS FOR HOLES PRIOR TO TAPPING SCREW THREADS.) |
| NF E66-080-1980 |
建筑物用帶硬金屬鉆頭的鉆.沖擊鉆頭式鉆機.特性 |
(MASONRY DRILLS,WITH HARD METAL TIPS. HAMMER DRILLS. CHARACTERISTICS.) |
| NF E66-081-1984 |
建筑物用鉆機.旋轉沖擊鉆機的連接錐體.尺寸 |
(MASONRY DRILLS. TAPERS OF HAMMER DRILLS.) |
| NF E66-101-2002 |
G系列和Rp系列管螺紋用的螺紋絲錐.螺紋部分的公差 |
(Ground thread taps for pipe threads G series and Rp series - Tolerances on the threaded portion.) |
| NF E66-103-1993 |
機用螺絲錐和手動螺絲錐 |
(Short machine taps and hand taps.) |
| NF E66-107-2000 |
公稱直徑由M3-M10的長桿螺絲攻.由回縮的全直徑桿型螺絲攻 |
(Long shank taps with nominal diameters from M3 to M10 - Full-diameter shank taps with recess.) |
| NF E66-108-2000 |
公稱直徑由M3-M24和1/8-1 英寸的長桿螺絲攻.漸減型螺絲攻 |
(Long shank taps with nominal diameters from M3 to M24 and 1/8 in to 1 in - Reduced shank taps.) |
| NF E66-120-1975 |
圓柱和錐形管螺紋手用螺絲錐 |
(HAND TAPS FOR PIPE THREADS FOR PARALLEL AND TAPER THREADS.) |
| NF E66-130-1983 |
可調的絲錐板手（絲錐架） |
(ADJUSTABLE TAP WRENCHES (TAP HOLDERS).) |
| NF E66-150-1990 |
ＩＳＯ公制螺紋的手用和機用圓螺絲板牙 |
(Hand- An machine-operated circular screwing dies and hand-operated die stocks.) |
| NF E66-153-1990 |
煤氣管道圓柱螺紋手用和機用圓螺絲板牙 |
(Hand-and machine-operated circular screwing dies for parallel pipe threads. G series.) |
| NF E66-154-1990 |
煤氣管道錐形螺紋手用和機用圓螺紋板牙 |
(Hand- and machine-operated circular screwing dies for taper pipe threads. R series.) |
| NF E66-156-1985 |
手用六角圓板牙.尺寸 |
(Hexagonal dienuts. Dimensions.) |
| NF E66-199-1996 |
銑刀.命名法 |
(Milling cutters. Nomenclature.) |
| NF E66-200-2-2000 |
銑刀筒形手柄.第2部分:扁筒形手柄尺寸特性 |
(Cylindrical shanks for milling cutters - Part 2 : dimensional characteristics of flatted cylindrical shanks.) |
| NF E66-204-1984 |
桿傳動金屬銑刀.與銑刀桿主軸的互換性尺寸 |
(Milling cutters with tenon drive. Interchangeability dimensions with cutter mandrels.) |
| NF E66-205-1981 |
金屬銑刀.特性 |
(MILLING CUTTERS. CHARACTERISTICIS.) |
| NF E66-208-1977 |
圓柱柄錐形陰模銑刀 |
(TAPERED DIE-SINKING CUTTERS WITH PARALLEL SHANKS.) |
| NF E66-208-2003 |
直柄錐形凹模銑刀 |
(Tapered die-sinking cutters with parallel shanks.) |
| NF E66-209-1977 |
７／２４錐形柄兩面刃圓柱形銑刀.標準系列和長系列 |
(END MILLS 7/24 TAPER SHANKS. STANDARD SERIES AND LONG SERIES.) |
| NF E66-210-1977 |
７／２４錐形柄開槽銑刀.短系列和標準系列 |
(SLOT DRILLS WITH 7/24 TAPER SHANKS. STANDARD SERIES AND LONG SERIES.) |
| NF E66-211-1977 |
圓柱柄兩面刃圓柱形銑刀.標準系列和長系列 |
(END MILLS WITH PARALLEL SHANKS. STANDARD SERIES AND LONG SERIES.) |
| NF E66-212-1977 |
莫氏錐柄兩面刃圓柱形銑刀.標準系列和長系列 |
(END MILLS WITH MORSE TAPER SHANK. STANDARD SERIES AND LONG SERIES.) |
| NF E66-213-1972 |
螺紋孔后定中心兩面刃圓柱形銑刀 |
(SHELL END MILLS WITH THREADED BORE AND BACK CENTRING.) |
| NF E66-214-1984 |
桿傳動兩面刃圓柱形銑刀 |
(Shell end mills with tenon drive.) |
| NF E66-215-1-2003 |
端銑刀和槽銑刀.第1部分:直柄銑刀 |
(End mills and slot drills - Part 1: milling cutters with cylindrical shanks.) |
| NF E66-215-2-2003 |
端銑刀和槽銑刀.第2部分:莫氏錐柄銑刀 |
(End mills and slot drills - Part 2 : milling cutters with Morse taper shanks.) |
| NF E66-215-3-2003 |
端銑刀和槽銑刀.第3部分:7/24錐柄銑刀 |
(End mills and slot drills - Part 3 : milling cutters with 7/24 taper shanks.) |
| NF E66-216-2002 |
鍵傳動銑刀.有恒定外形的成形銑刀 |
(Bore cutters with key drive - Form milling cutters with constant profile.) |
| NF E66-217-1977 |
圓柱柄開槽銑刀.短系列和標準系列 |
(SLOT DRILL WITH PARALLEL SHANKS. SHORT SERIES AND STANDARD SERIES.) |
| NF E66-218-1977 |
莫氏錐柄開槽銑刀.短系列和標準系列 |
(SLOT DRILLS WITH MORSE TAPER SHANK. SHORT SERIES AND STANDARD SERIES.) |
| NF E66-225-1972 |
栓傳動單面刃開槽銑刀 |
(SLOTTING CUTTERS WITH KEY DRIVE.) |
| NF E66-226-1966 |
鍵傳動平面銑刀 |
(FACING CUTTERS WITH KEY DRIVE.) |
| NF E66-227-1968 |
螺紋孔后定中心４５°和６０°兩面刃錐形銑刀 |
(SINGLE ANGLE CUTTERS (45 DEGREES AND 60 DEGREES) WITH THREADED BORE AND BACK CENTRING.) |
| NF E66-228-1977 |
圓柱柄Ｔ形槽銑刀 |
(T SLOT CUTTERS WITH PARALLEL SHANKS.) |
| NF E66-229-1975 |
莫氏錐柄Ｔ形槽銑刀 |
(T SLOT CUTTERS WITH MORSE TAPER SHANKS.) |
| NF E66-233-1975 |
粗細齒圈銑刀 |
(METAL SLITTING SAWS WITH FINE AND COARSE TEETH.) |
| NF E66-235-1966 |
鏈傳動.切削齒輪的圓盤銑刀斷面 |
(CHAIN TRANSMISSIONS. PROFILE OF CHAIN WHEEL MODUAL CUTTERS.) |
| NF E66-236-1966 |
鏈傳動.切削齒輪的滾刀斷面 |
(CHAIN TRANSMISSIONS. PROFILE OF CHAIN WHEEL HOBS.) |
| NF E66-237-1984 |
桿傳動表面加工鐘形架銑刀 |
(Bell-shaped face cutters with tenon drive.) |
| NF E66-239-1975 |
７／２４錐形柄活動齒圓柱銑刀 |
(INSERTED TOOTH CUTTERS WITH 7/24 TAPER SHANK.) |
| NF E66-240-1984 |
桿傳動活動齒圓柱銑刀 |
(Inserted tooth cutters with tenon drive.) |
| NF E66-241-1979 |
７／２４主軸前部圓柱銑刀.活動齒銑刀 |
(Milling cutters mounted on centring arbors having a 7/24 taper. Inserted tooth cutters.) |
| NF E66-242-1977 |
栓傳動等腰銑刀 |
(DOUBLE EQUAL ANGLE CUTTERS WITH KEY DRIVE.) |
| NF E66-243-1966 |
栓傳動雙面錐形銑刀 |
(SINGLE ANGLE CUTTERS WITH KEY DRIVE.) |
| NF E66-244-1975 |
栓傳動直齒圈三面刃銑刀 |
(SIDE AND FACE CUTTERS WITH STRAIGHT TEETH WITH KEY DRIVE.) |
| NF E66-245-1975 |
栓傳動變換齒圈三面刃銑刀 |
(SIDE AND FACE CUTTERS WITH STAGGERED TOOTH WITH KEY DRIVE.) |
| NF E66-247-1968 |
后定中心螺紋孔變換齒圈套筒式三面刃銑刀 |
(SIDE AND FACE CUTTERS WITH ALTERNATE TEETH,WITH THREADED BORE AND BACK CENTRING.) |
| NF E66-248-1979 |
７／２４主軸前部圓柱銑刀.固定互換性尺寸 |
(Milling cutters mounted on centring arbors having a 7/24 taper. Fitting dimensions.) |
| NF E66-249-1974 |
頂角６０°,９０°和１２０°莫氏錐柄倒角銑刀 |
(MORSE TAPER SHANK COUNTERSINKS FOR ANGLES 60, 90 AND 120 INCLUSIVE.) |
| NF E66-250-1974 |
頂角６０°,９０°和１２０°圓柱柄倒角銑刀 |
(PARALLEL SHANK COUNTERSINKS FOR ANGLES 60, 90 AND 120 INCLUSIVE.) |
| NF E66-252-1-1996 |
有轉位刀片的立銑刀.第1部分:扁平直柄立銑刀 |
(End mills with indexable inserts. Part 1 : end mills with flatted parallel shank.) |
| NF E66-252-2-1996 |
有轉位刀片的立銑刀.第2部分:莫氏錐柄立銑刀 |
(End mills with indexable inserts. Part 2 : end mills with morse taper shank.) |
| NF E66-253-1996 |
有轉位刀片的面銑刀.尺寸 |
(Face milling cutters with indexable inserts. Dimensions.) |
| NF E66-255-1982 |
硬金屬活動刀片銑刀.三面刃銑刀 |
(MILLING CUTTERS WITH HARDMETAL INDEXABLE INSERTS. SIDE AND FACE MILLING CUTTERS.) |
| NF E66-265-1994 |
有直柄的固體硬質合金端銑刀的尺寸 |
(SOLID HARDMETAL END MILLS WITH PARALLEL SHANK. DIMENSIONS.) |
| NF E66-266-1-1998 |
銑刀.名稱.第1部分:實心或焊齒帶柄端銑刀 |
(MILLING CUTTERS. DESIGNATION. PART 1 : SHANK TYPE END MILLS OF SOLID OR TIPPED DESIGN.) |
| NF E66-266-2-1998 |
銑刀.名稱.第2部分:帶可分度鑲嵌刀片的柄式銑刀和帶孔銑刀 |
(MILLING CUTTERS. DESIGNATION. PART 2 : SHANK TYPE AND BORE TYPE MILLING CUTTERS WITH INDEXABLE INSERTS.) |
| NF E66-270-2001 |
高速切削機床用銑刀.安全要求 |
(Milling cutters for high speed machining - Safety requirements.) |
| NF E66-303-2000 |
車刀和刨刀柄.選擇形狀和尺寸 |
(Shanks for turning and planning tools - Shapes and dimensions of the section.) |
| NF E66-305-1969 |
車刀的金屬碳化物刀片 |
(CARBIDE TIPS FOR TURNING TOOLS.) |
| NF E66-308-1998 |
有圓柱形固定孔和圓角的可轉位硬質合金刀片.尺寸 |
(Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole. Dimensions.) |
| NF E66-310-1991 |
刀具用活動刀片.名稱 |
(Indexable inserts for cutting tools. Designation.) |
| NF E66-310/A1-2002 |
切削刀具用可轉位刀片.命名.V型刀片的d和 m公差 |
(Indexable inserts for cutting tools - Designation - Tolerance of d and m of V-shape inserts.) |
| NF E66-311-1995 |
可轉位刀片的車刀和仿形刀刀柄和刀片座.名稱與牌號 |
(Turning and copying tool holders and cartridges for indexable inserts. Designation.) |
| NF E66-312-1995 |
配用于可轉位刀片的鏜桿(有柱形刀柄的刀具夾).名稱和牌號 |
(Boring bars (tool holder with cyldindrical shank) for indexable inserts. Designation.) |
| NF E66-321-1984 |
自動機床用硬金屬刀片 |
(Hardmetal inserts for tools for turning on automatic machines.) |
| NF E66-322-1984 |
車床工具.帶硬金屬釬焊刀片的自動車刀 |
(Turning tools. Tools with hardmetal inserts for turning on automatic machines.) |
| NF E66-327-1991 |
刀具用活動刀片.圓弧端陶瓷刀片.第1部分:無固定孔刀片的尺寸 |
(Indexable inserts for cutting tools. Ceramic inserts with rounded corners. Part 1 : dimensions of inserts without fixing hole.) |
| NF E66-328-1991 |
刀具用活動刀片.圓弧端陶瓷刀片.第2部分:有圓柱形固定孔的刀片尺寸 |
(INDEXABLE INSERTS FOR CUTTING TOOLS. CERAMIC INSERTS WITH ROUNDED CORNERS. PART 2 : DIMENSIONS OF INSERTS WITH CYLINDRICAL FIXING HOLE.) |
| NF E66-344-1999 |
帶可轉位刀片的車刀和仿形刀用單刃刀具夾頭.尺寸 |
(Single-point tool holders for turning and copying, for indexable inserts. Dimensions.) |
| NF E66-345-1995 |
A型可轉位刀片座.尺寸 |
(Cartridges, type A, for indexable inserts. Dimensions.) |
| NF E66-346-1999 |
裝轉位刀片用鏜桿.尺寸 |
(Boring bars for indexable inserts. Dimensions.) |
| NF E66-350-1991 |
活動刀片鉆.扁平圓柱手柄 |
(DRILLS WITH INDEXABLE INSERTS. CYLINDRICAL SHANKS WITH A PARALLEL FLAT.) |
| NF E66-363-1966 |
高速鋼合金車床刀具.偏刀 |
(TURNING TOOLS WITH SPEED STEEL INSERTS. OFFSET SIDE TURNING TOOLS.) |
| NF E66-364-1966 |
高速鋼合金車床刀具.倒角車刀 |
(TURNING TOOLS WITH SPEED STEEL INSERTS. OFFSET TURNING TOOLS FOR CORNER WORK.) |
| NF E66-365-1966 |
高速鋼合金車床刀具.外圓車刀 |
(STRAIGTH TURNING TOOLS WITH HIGH SPEED TIPS.) |
| NF E66-366-1966 |
高速鋼合金車床刀具.寬臉方頭車刀 |
(TURNING TOOLS WITH SPEED STEEL INSERTS. WIDE FACE SQUARE NOSE TURNING TOOLS.) |
| NF E66-367-1966 |
高速鋼合金車床刀具.切槽刀 |
(TURNING TOOLS WITH SPEED STEEL INSERTS. PARTING OFF TURNING TOOLS.) |
| NF E66-368-1966 |
高速鋼合金車床刀具.切斷車刀 |
(TURNING TOOLS WITH SPEED STEEL INSERTS. CUTTING OFF TOOLS.) |
| NF E66-369-1966 |
高速鋼合金車床刀具.車外螺紋刀具 |
(TURNING TOOLS WITH SPEED STEEL INSERTS. EXTERNAL THREADING TOOLS.) |
| NF E66-370-1966 |
高速鋼合金車床刀具.鏜刀 |
(TURNING TOOLS WITH SPEED STEEL INSERTS. BORING TOOLS.) |
| NF E66-371-1966 |
高速鋼合金車床刀具.鏜孔端面刀具 |
(TURNING TOOLS WITH SPEED STEEL INSERTS. INTERNAL SIDE TURNING TOOLS.) |
| NF E66-372-1966 |
高速鋼合金車床刀具.擴孔鏜刀 |
(TURNING TOOLS WITH SPEED STEEL INSERTS. RIGHT ANGLE PARTING OFF TURNING TOOLS.) |
| NF E66-373-1966 |
高速鋼合金車床刀具.車內螺紋刀具 |
(TURNING TOOLS WITH SPEED STEEL INSERTS. INTERNAL THREADING TOOLS.) |
| NF E66-380-1985 |
高速鋼矯正棒.尺寸 |
(GROUND HIGH SPEED STEEL TOOL BITS. DIMENSIONS.) |
| NF E66-405-1983 |
空氣錘工具的連接 |
(Shanks for pneumatic hammers.) |
| NF E66-500-1993 |
切削工具.高速鋼組名稱與符號 |
(Cutting tools. Designation of high speed steel groups.) |
| NF E66-502-1993 |
切削和研磨的基本量.第一部分:切削工具工作部分幾何結構.一般術語:參照系統、工作角度、斷屑臺 |
(Basic quantities in cutting and grinding. Part 1 : geometry of the active part of cutting tools. General tems, reference systems, tool and working angles, chip breakers.) |
| NF E66-506-1985 |
加工和修整的基本數值.加工時幾何和運動學數值 |
(Basic quantities in cutting and grinding. Geometric and kinematic quantities in cutting.) |
| NF E66-507-1985 |
加工和修整的基本數值.力、能量和功率 |
(Basic quantities in cutting and grinding. Forces, energy, power.) |
| NF E66-508-1991 |
切割和研磨的基本量.第5部分:使用砂輪研磨加工用的基本術語 |
(Basic quantities in cutting and grinding. Part 5 : basic terminology for grinding processes using grinding wheels.) |
| NF E66-510-1975 |
車床刀尖的圓弧半徑 |
(Corner radius of single point cutting tools.) |
| NF E66-511-1989 |
銑刀壽命試驗.第1部分:銑削平面 |
(TOOL LIFE TESTING IN MILLING. PART 1 : FACE MILLING.) |
| NF E66-512-1989 |
銑刀壽命試驗.第2部分:端銑 |
(TOOL LIFE TESTING IN MILLING. PART 2 : END MILLING.) |
| NF E66-520-7-2000 |
切割工具的工作帶.雙工具材料.第7部分:對固態鉆孔技術的應用 |
(Working zones of cutting tools - Couple tool-material - Part 7 : application to drilling technology on solid.) |
| NF E66-520-8-2000 |
切割工具的工作帶.雙工具材料.第8部分:在平面上鉆孔的雙工具材料方法學 |
(Working zones of cutting tools - Couple tool-material - Part 8 : couple tool-material methodology in drilling on plain.) |
| NF E66-531-1996 |
機床.工具手柄自動夾緊拔銷 |
(Machine tools. Self-holding tapers for tool shanks.) |
| NF E66-532-1977 |
連接錐體.莫氏錐正傳動 |
(POSITIVE DRIVE OF MORSE TAPERS.) |
| NF E66-533-1997 |
機床切削工具.莫氏錐度柄.帶斜鍵的銷槽 |
(Machine-tools. Morse taper shanks. Cotter slots with taper keys.) |
| NF E66-534-1970 |
莫氏錐式刀具轉接套筒 |
(REDUCTION SLEEVES FOR MORSE TAPER TOOLS.) |
| NF E66-535-1969 |
莫氏錐式刀具用長套筒 |
(EXTENSION SOCKETS FOR TOOLS WITH MORSE TAPER SHANKS.) |
| NF E66-536-1969 |
鉆床卡盤.機體和柄的連接 |
(DRILL CHUCK TAPERS.) |
| NF E66-537-1979 |
桿式圓柱柄刀具的伸長套筒 |
(SOCKETS FOR PARALLEL SHANK TOOLS WITH DRIVING TENONS.) |
| NF E66-540-1983 |
鉆床卡盤.鍵型三爪卡盤.尺寸 |
(DRILL CHUCKS. KEY TYPE THREE-JAW CHUCK. DIMENSIONS.) |
| NF E66-541-1983 |
鉆床卡盤.三爪盤用鍵.尺寸 |
(DRILL CHUCKS. KEYS FOR THREE-JAW CHUCK. DIMENSIONS.) |
| NF E66-542-1983 |
鉆床卡盤.鍵型三爪卡盤.技術規范 |
(DRILL CHUCKS. KEY TYPE THREE. JAW CHUCK. TECHNICAL SPECIFICATIONS.) |
| NF E66-545-1983 |
鉆床卡盤.無鍵自動緊固三爪卡盤.尺寸 |
(DRILL CHUCKS. THREE JAW,KEYLESS,SELF TIGHTENING CHUCK. DIMENSIONS.) |
| NF E66-546-1983 |
鉆床卡盤.無鍵自動緊固三爪卡盤.技術規范 |
(DRILL CHUCKS. THREE-JAW,KEELESS,SELF TIGHTENING CHUCK. TECHNICAL SPECIFICATIONS.) |
| NF E66-550-1-1998 |
帶圓柱柄的工具夾.第1部分:圓柱狀柄,定位鏜孔.技術交貨條件 |
(TOOL HOLDERS WITH CYLINDRICAL SHANK. PART 1 : CYLINDRICAL SHANK, LOCATION BORE. TECHNICAL DELIVERY CONDITIONS.) |
| NF E66-550-2-1998 |
帶圓柱柄的工具夾.第2部分:A型,特殊設計的工具夾柄 |
(TOOL HOLDERS WITH CYLINDRICAL SHANK. PART 2 : TYPE A, SHANKS FOR TOOL HOLDERS OF SPECIAL DESIGNS.) |
| NF E66-550-3-1998 |
帶圓柱柄的工具夾.第3部分:B型帶矩形放射狀底座的工具夾 |
(TOOL HOLDERS WITH CYLINDRICAL SHANK. PART 3 : TYPE B WITH RECTANGULAR RADIAL SEAT.) |
| NF E66-550-4-1998 |
帶圓柱柄的工具夾.第4部分:C型帶矩形軸狀底座的工具夾 |
(TOOL HOLDERS WITH CYLINDRICAL SHANK. PART 4 : TYPE C WITH RECTANGULAR AXIAL SEAT.) |
| NF E66-550-5-1998 |
帶圓柱柄的工具夾.第5部分:帶多于一個矩形底座的D型工具夾 |
(TOOL HOLDERS WITH CYLINDRICAL SHANK. PART 5 : TYPE D WITH MORE THAN ONE RECTANGULAR SEAT.) |
| NF E66-550-6-1998 |
帶圓柱柄的工具夾.第6部分:帶圓柱狀底座的E型工具夾 |
(TOOL HOLDERS WITH CYLINDRICAL SHANK. PART 6 : TYPE E WITH CYLINDRICAL SEAT.) |
| NF E66-550-7-1998 |
帶圓柱柄的工具夾.第6部分:帶錐形底座的F型工具夾 |
(TOOL HOLDERS WITH CYLINDRICAL SHANK. PART 7 : TYPE F WITH TAPER SEAT.) |
| NF E66-550-8-1998 |
帶圓柱柄的工具夾.第8部分:Z型,附件 |
(TOOL HOLDERS WITH CYLINDRICAL SHANK. PART 8 : TYPE Z, ACCESSORIES.) |
| NF E66-551-1968 |
車床用刀架 |
(LATHE TOOL POSTS.) |
| NF E66-611-1983 |
內面拉削刀具.前掛鉤.形狀和尺寸 |
(Internal broaching tools. Pull ends.) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com