標準號 |
中文名稱 |
英文名稱 |
| NF T34-555-6-1998 |
涂料和清漆.防護漆系統對鋼結構的腐蝕防護.第6部分:實驗室性能試驗方法 |
Protection paints and varnishes. Corrosion of steel structures by protective paint systems. Part 6 : laboratory performance test methods. |
| NF T34-555-7-1998 |
涂料和清漆.防護漆系統對鋼結構的腐蝕防護.第7部分:涂漆工藝的實施和監督 |
Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Part 7 : execution and supervision of paint work. |
| NF T34-555-8-1998 |
涂料和清漆.防護漆系統對鋼結構的腐蝕防護.第8部分:新工藝和維修規范的制定 |
Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Part 8 : development of specifications for new work and maintenance. |
| NF T34-600-1997 |
涂料和清漆.防護噴涂系統的鋼結構的腐蝕防護.C 5M級規范 |
PAINTS AND VARNISHES. CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS. SPECIFICATIONS OF C 5M CLASS. |
| NF T34-721-1-1996 |
涂料和清漆.外部磚石建筑和混凝土用涂覆材料和系統.第1部分:分類 |
PAINTS AND VARNISHES. COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR MASONRY AND CONCRETE. PART 1 : CLASSIFICATION. (EUROPEAN STANDARD EN 1062-1). |
| NF T34-721-11-2002 |
涂料和清漆.外部磚石和混凝土用涂層材料和涂層系統.第11部分:檢驗前調和方法 |
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 11 : methods of conditioning before testing. |
| NF T34-721-2-1999 |
涂料和清漆.外部磚石工程和混凝土用涂覆材料和涂覆系統.第2部分:水蒸氣滲透率的測定和分類 |
PAINTS AND VARNISHES. COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR MASONRY AND CONCRETE. PART 2: DETERMINATION AND CLASSIFICATION OF WATER-VAPOUR TRANSMISSION RATE (PERMEABILITY). (EUROPEAN STANDARD EN ISO 7783-2). |
| NF T34-721-3-1999 |
涂料和清漆.外部磚石和混凝土用涂層材料和系統.第3部分:液體-水透過率的測定和分類(滲透性) |
PAINTS AND VARNISHES. COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR MASONRY AND CONTRETE. PART 3 : DETERMINATION AND CLASSIFICATION OF LIQUID-WATER TRANSMISSION RATE (PERMEABILITY). (EUROPEAN STANDARD EN 1062-3). |
| NF T34-721-6-2002 |
涂料和清漆.外部磚石和混凝土用涂層材料和涂層系統.第6部分:二氧化碳滲透性的測定 |
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 6 : determination of carbon dioxide permeability. |
| NF T34-750-1-2003 |
涂料和清漆.建筑用鋁及鋁合金涂層.第1部分:粉末涂覆材料制涂層 |
(Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1 : coatings prepared from powder coating materials.) |
| NF T35-004-1990 |
涂料和清漆的涂刷和干燥用具.噴漆.在空氣中噴射的測量方法 |
Installations for application and drying of paints and varnishes. Application and combined booths. Application by spraying. Methods of measurement of rejects to atmosphere. |
| NF T35-008-1986 |
涂料和清漆的涂刷和干燥用具.涂刷室和調和室.各類頂目查詢表 |
INSTALLATION FOR THE APPLICATION AND DRYING OF PAINTS AND VARNISHES TYPE ITEMS FOR ENQUIRY. |
| NF T35-009-1989 |
涂料和清漆的涂刷及干燥設施.噴漆間.概念.設計特性和測量方法 |
Installations for application and drying of paints and varnishes. Spray paint booths. Design, working characteristics and measurement methods. |
| NF T35-010-2000 |
釋放易燃物質的烘箱.安全要求 |
Dryers and ovens, in which flammable substances are released - Safety requirements. |
| NF T35-011-1990 |
色漆和清漆涂刷和干燥器具.內部無操作員的噴漆室.設計.工作性能和測量方法 |
INSTALLATIONS FOR APPLICATION AND DRYING OF PAINTS AND VARNISHES. POWDER BOOTHS WITHOUT OPERATOR INSIDE THE BOOTH. DESIGN,WORKING CHARACTERISTICS AND MEASUREMENT METHODS. |
| NF T35-013-1992 |
涂料和清漆涂刷和干燥器具.涂料制備和使用工具用清潔設備的打開裝置和關閉機械.設計、工作性能和測量方法 |
INSTALLATIONS FOR APPLICATION AND DRYING OF PAINTS AND VARNISHES. OPEN EQUIPMENTS AND CLOSED MACHINES FOR CLEANING EQUIPMENTS FOR PREPARATION AND APPLICATION OF PAINTS. DESIGN,WORKING,CHARACTERISTICS AND MEASUREMENT METHODS. |
| NF T35-014-1992 |
色漆和清漆噴涂和干燥用器具.色漆調制箱.設計、工作特性 |
INSTALLATIONS FOR APPLICATION AND DRYING OF PAINTS AND VARNISHES. BOX FOR PREPARATION OF PAINTS. DESIGN,WORKING CHARACTERISTICS. |
| NF T35-020-2003 |
液體涂層材料用噴霧和噴射設備轉換效率的測定.第1部分:平板 |
(Determination of the transfer efficiency of atomising and spraying equipment for liquid coating materials - Part 1 : flat panels.) |
| NF T35-202-1998 |
涂覆材料的霧化和噴射設備.安全要求(歐洲標準EN 1953) |
ATOMISING AND SPRAYING EQUIPMENT FOR COATING MATERIALS. SAFETY REQUIREMENTS. (EUROPEAN STANDARD EN 1953). |
| NF T35-501-1-2001 |
涂料和有關產品使用前鋼襯底的制備.表面清潔度的視覺評價.第1部分:未涂覆鋼襯底和已有覆層全部除去后鋼襯底的銹蝕等級和制備等級.補充信息:用不同磨料噴砂清理時鋼表面變化的典型照相實例 |
|
| NF T35-501-2-2001 |
涂料和有關產品使用前鋼襯底的制備.表面清潔度的視覺評價.第2部分:已有覆層局部除去后已涂覆鋼襯底的制備等級 |
Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 2 : preparation grades of previously coated steel substrates after localized removal of previous coatings. |
| NF T35-502-2-1999 |
涂料和有關產品使用前鋼襯底的制備.表面清潔度的評定試驗.第2部分:已清潔表面氯化物的實驗室測定 |
Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Part 2 : laboratory determination of chloride on cleaned surfaces. |
| NF T35-502-3-1999 |
涂料和有關產品使用前鋼襯底的制備.表面清潔度的評定試驗.第3部分:涂漆鋼表面灰塵評定(壓敏帶法) |
|
| NF T35-502-4-1999 |
涂料和有關產品使用前鋼襯底的制備.表面清潔度的評定試驗.第4部分:涂料涂覆前凝結可能性的評定導則 |
Preparation of steel substrates before application of paint and related products. Tests for the assessment of surface cleanliness. Part 4 : guidance on the estimation of the probability of condensation prior to paint application. |
| NF T35-502-6-1999 |
涂料和有關產品使用前鋼襯底的制備.表面清潔度的試驗.第6部分:Bresle法分析用可溶性雜質的析取 |
PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS. PART 6 : EXTRACTION OF SOLUBLE CONTAMINANTS FOR ANALYSIS. THE BRESLE METHOD. (EUROPEAN STANDARD EN ISO 8502-6). |
| NF T35-502-9-2001 |
涂料和有關產品使用前鋼襯底的制備.表面清潔度的評定試驗.第9部分:水溶鹽電導儀測定的現場方法 |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9 : field method for the conductometric determination of water-soluble salts. |
| NF T35-503-1-1995 |
涂料和有關產品使用前的鋼襯底的制備.噴丸處理鋼基體的表面粗糙度.第一部分:噴砂處理表面的ISO評定比較樣板的規范和定義(EN ISO 8503-1) |
|
| NF T35-503-2-1995 |
涂料和有關產品使用前的鋼襯底的制備. 噴丸處理鋼基體的表面粗糙度.第二部分:噴砂處理表面的定級方法.比較程序(EN ISO 8503-2) |
|
| NF T35-503-3-1995 |
涂料和有關產品使用前的鋼襯底的制備.噴丸處理鋼基體的表面粗糙度.第三部分:ISO表面輪廓比較儀的校準方法和表面輪廓的測定方法.顯微鏡的調焦方法 |
|
| NF T35-503-4-1995 |
涂料和有關產品使用前的鋼襯底的制備.噴丸處理鋼基體的表面粗糙度.第四部分:ISO表面輪廓比較儀的校準方法和表面輪廓的測定方法.觸針儀器的方法 |
|
| NF T35-504-1-2001 |
涂料和有關產品使用前鋼襯底的制備.表面制備方法.第1部分:通用原理 |
Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1 : general principles. |
| NF T35-504-2-2001 |
涂料和有關產品使用前鋼襯底的制備.表面制備方法.第2部分:噴砂清理 |
Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2 : abrasive blast-cleaning. |
| NF T35-504-3-2001 |
涂料和有關產品使用前鋼襯底的制備.表面制備方法.第3部分:手工工具和電動工具清洗 |
Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 3 : hand- and power-tool cleaning. |
| NF T35-505-1-1997 |
在涂漆和涂類似產品前鋼襯底的加工.金屬清洗磨料規范.第1部分:一般介紹和分類(歐洲標準EN ISO 11124-1) |
Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives. Part 1 : general introduction and classification. |
| NF T35-505-3-1997 |
用涂層材料涂覆前鋼表面的準備工作.金屬噴射清潔材料的要求.第3部分:高碳鑄鋼噴丸及砂粒(EN ISO 11124-3) |
PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. SPECIFICATIONS FOR METALLIC BLAST-CLEANING ABRASIVES. PART 3 : HIGH-CARBON CAST-STEEL SHOT AND GRIT. (EUROPEAN STANDARD EN ISO 11124-3). |
| NF T35-505-4-1997 |
涂料和相關產品應用前鋼鐵襯底的準備.金屬噴砂清理磨損的規范.第4部分:低碳鑄鋼的噴射(EN ISO 11124-4) |
Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives. Part 4 : low-carbon cast-steel shot. |
| NF T35-505-7-1999 |
涂料和相關制品使用前鋼襯底的制備.非金屬噴砂清理磨料的規范.第7部分:熔融氧化鋁 |
PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. SPECIFICATIONS FOR NON-METALLIC BLAST-CLEANING ABRASIVES. PART 7 : FUSED ALUMINIUM OXIDE. (EUROPEAN STANDARD EN ISO 11126-7). |
| NF T35-506-1994 |
色漆和清漆.鋅粉工廠底漆.襯底的次級制備的定義 |
PAINTS AND VARNISHES. ZINC DUST SHOP PRIMERS. DEFINITION OF SECONDARY PREPARATION GRADES OF SUBSTRATES. |
| NF T35-507-6-1997 |
涂料和相關產品應用前鋼襯墊的制備.金屬噴砂清洗粘結劑的試驗方法.第6部分:外來物質的測定(EN ISO 11125-6) |
PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. TEST METHODS FOR METALLIC BLAST-CLEANING ABRASIVES. PART 6 : DETERMINATION OF FOREIGN MATTER. (EUROPEAN STANDARD EN ISO 11125-6). |
| NF T35-507-7-1997 |
涂料和相關產品應用前鋼襯墊的制備.金屬噴砂清洗粘結劑的試驗方法.第7部分:濕度的測定(EN ISO 11125-7) |
PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. TEST METHODS FOR METALLIC BLAST-CLEANING ABRASIVES. PART 7 : DETERMINATION OF MOISTURE. (EUROPEAN STANDARD EN ISO 11125-7). |
| NF T35-508-4-1998 |
涂料和相關產品使用前鋼襯底的制備.非金屬噴砂清理磨料的規范 第4部分:煤爐爐渣(EN ISO 11126-4) |
Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Part 4 : coal furnace slag. |
| NF T35-508-5-1998 |
涂料和相關產品使用前鋼襯底的制備.非金屬噴涂清砂磨料的規范.第5部分:煉鎳礦渣(EN ISO 11126-5) |
Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Part 5 : nickel refinery slag. |
| NF T35-508-6-1997 |
涂料和相關產品使用前鋼襯底的制備.非金屬噴涂清砂磨料的規范.第5部分:煉鎳礦渣(EN ISO 11126-6) |
PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. SPECIFICATIONS FOR NON-METALLIC BLAST-CLEANING ABRASIVES. PART 6 : IRON FURNACE SLAG. (EUROPEAN STANDARD EN ISO 11126-6). |
| NF T35-508-8-1997 |
涂料及相關產品應用前鋼襯墊的制備.非金屬噴砂清理磨料規范.第8部分:橄欖砂(EN ISO 11126-8) |
PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. SPECIFICATIONS FOR NON-METALLIC BLAST-CLEANING ABRASIVES. PART 8 : OLIVINE SAND. (EUROPEAN STANDARD EN ISO 11126-8). |
| NF T35-509-1-1997 |
涂料及相關產品應用前鋼襯墊的制備.非金屬噴砂清理磨料試驗方法.第1部分:抽樣(EN ISO 11127-1) |
PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVES. PART 1 : SAMPLING. (EUROPEAN STANDARD EN ISO 11127-1). |
| NF T35-509-4-1997 |
涂料及相關產品應用前鋼襯墊的制備.非金屬噴砂清理磨料試驗方法.第4部分:玻璃載片試驗評估硬度(EN ISO 11127-4) |
PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVES. PART 4 : ASSESSMENT OF HARDNESS BY A GLASS SLIDE TEST. (EUROPEAN STANDARD EN ISO 11127-4). |
| NF T35-509-5-1997 |
涂料及相關產品應用前鋼襯墊的制備.非金屬噴砂清理磨料試驗方法.第5部分:濕度測定(EN ISO 11127-5) |
PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVES. PART 5 : DETERMINATION OF MOISTURE. (EUROPEAN STANDARD EN ISO 11127-5). |
| NF T35-509-6-1997 |
涂料及相關產品應用前鋼襯墊的制備.非金屬噴砂清理磨料試驗方法.第6部分:導電率測定水溶性污染物(EN ISO 111127-6) |
PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVES. PART 6 : DETERMINATION OF WATER-SOLUBLE CONTAMINANTS BY CONDUCTIVITY MEASUREMENT. (EUROPEAN STANDARD EN ISO 11127-6) |
| NF T35-520-1997 |
涂料和清漆.已涂覆鋼襯墊的制備.高壓水噴洗 |
PAINTS AND VARNISHES. PREPARATION OF STEEL SUBSTRATES ALREADY COATED. HIGH-PRESSURE WATER JETTING CLEANING. |
| NF T36-001-1-1996 |
色漆和清漆.涂層材料的術語和定義.第1部分:一般術語 |
PAINTS AND VARNISCHES. TERMS AND DEFINITIONS FOR COATING MATERIALS. PART 1 : GENERAL TERMS. (EUROPEAN STANDARD EN 971-1). |
| NF T36-001-3-1999 |
涂料和清漆.涂覆材料的術語和定義.第3部分:表面特性和應用方法 |
Paints and varnishes. Terms and definitions for coating materials. Part 3 : surface preparation and methods of application. |
| NF T36-004-1-1988 |
涂料和清漆.顏色測定.第1部分:原理 |
Paints and varnishes. Colorimetry. Part 1 : principles. |
| NF T36-004-2-1988 |
涂料和清漆.顏色測定.第2部分:顏色的測量 |
Paints and varnishes. Colorimetry. Part 2 : colour measurement. |
| NF T36-004-3-1988 |
涂料和清漆.顏色測定.第3部分:顏色差異計算方法 |
Paints and varnishes. Colorimetry. Part 3 : calculation of colour differences. |
| NF T36-010-2002 |
涂料和清漆.等效術語表 |
Paints and varnishes - List of equivalent terms. |
| NF T37-001-0-2001 |
鍍金屬線圈.試驗方法.第0部分:總說明和試驗方法清單 |
Coil coated metals - Test methods - Part 0 : general introduction and list of test methods. |
| NF T37-001-1-2001 |
鍍金屬線圈.試驗方法.第1部分:鍍層厚度 |
Coil coated metals - Test methods - Part 1 : coating thickness. |
| NF T37-001-10-2001 |
鍍金屬線圈.試驗方法.第10部分:抗紫外線熒光和水冷凝 |
Coil coated metals - Test methods - Part 10 : resistance to fluorescent UV light and water condensation. |
| NF T37-001-13-2001 |
卷材覆層金屬.試驗方法.第13部分:耐熱加速老化性能 |
Coil coated metals - Test methods - Part 13 : resistance to accelerated ageing by the use of heat. |
| NF T37-001-14-2001 |
卷材覆層金屬.試驗方法.第14部分:粉化(Helmen法) |
Coil coated metals - Test methods - Part 14 : chalking (Helmen method). |
| NF T37-001-15-2002 |
卷材覆層金屬.試驗方法.第15部分:位變異構 |
Coil coated metals - Test methods - Part 15 : metamerism. |
| NF T37-001-18-2002 |
卷材覆層金屬.試驗方法.第18部分:耐染色性 |
(Coil coated metals - Test methods - Part 18 : resistance to staining.) |
| NF T37-001-2-2001 |
鍍金屬線圈.試驗方法.第2部分:拋光光澤 |
(Coil coated metals - Test methods - Part 2 : specular gloss.) |
| NF T37-001-21-2003 |
卷材覆層金屬.試驗方法.第22部分:戶外暴露板材的評定 |
(Coil coated metals - Test methods - Part 21 : evaluation of outdoor exposed panels.) |
| NF T37-001-22-2003 |
卷材覆層金屬.試驗方法.第22部分:色差.外觀比對 |
(Coil coated metals - Test methods - Part 22 : colour difference - Visual comparison.) |
| NF T37-001-23-2002 |
卷材覆層金屬.試驗方法.第23部分:在含二氧化硫的濕氣中的顏色穩定性 |
(Coil coated metals - Test methods - Part 23 : colour stability in humid atmospheres containing sulfur dioxide.) |
| NF T37-001-3-2001 |
鍍金屬線圈.試驗方法.第3部分:色差.儀器比對 |
(Coil coated metals - Test methods - Part 3 : colour difference - Instrumental comparison.) |
| NF T37-001-4-2001 |
鍍金屬線圈.試驗方法.第4部分:鉛筆硬度 |
(Coil coated metals - Test methods - Part 4 : pencil hardness.) |
| NF T37-001-5-2001 |
鍍金屬線圈.試驗方法.第5部分:耐高速壓縮(沖擊試驗) |
(Coil coated metals - Test methods - Part 5 : resistance to rapid deformation (impact test).) |
| NF T37-001-6-2002 |
卷材覆層金屬.試驗方法.第6部分:壓痕后的粘著力(杯突試驗) |
(Coil coat metals - Test methods - Part 6 : adhesion after indentation (cupping test).) |
| NF T37-001-7-2001 |
鍍金屬線圈.試驗方法.第7部分:抗彎曲斷裂性(T彎曲試驗) |
(Coil coated metals - Test methods - Part 7 : resistance to cracking on bending (T-bend test).) |
| NF T37-001-8-2002 |
卷材覆層金屬.試驗方法.第8部分:耐鹽霧試驗 |
Coil coated metals - Test methods - Part 8 : resistance to salt spray (fog). |
| NF T37-001-9-2001 |
卷材覆層金屬.試驗方法.第9部分:耐水浸性能 |
Coil coated metals - Test methods - Part 9 : resistance to water immersion. |
| NF T40-001-1977 |
橡膠.詞匯 |
RUBBER.VOCABULARY. |
| NF T40-002-1988 |
橡膠及其膠乳.術語 |
Rubber and latices. Nomenclature. |
| NF T40-101-1979 |
橡膠.試樣調理和試驗的標準溫度、濕度和延續時間 |
RUBBER. TEST SPECIMEN. CONTROLLED ATMOSPHERES. TEST ATMOSPHERES. |
| NF T40-102-1972 |
橡膠.一般性能 |
RUBBER.GENERAL PROPERTIES. |
| NF T40-103-1988 |
橡膠和合成橡膠.硫化和試驗的間歇 |
VULCANIZED RUBBER. INTERVAL OF TIME BETWEEN VULCANIZATION AND TESTS. |
| NF T40-104-1976 |
橡膠.高于或低于常溫的試驗溫度的一般規定 |
RUBBER. GENERAL DIRECTIONS FOR ACHIEVING ELEVATED OR SUBNORMAL TEMPERATURES FOR TESTS. |
| NF T40-107-1987 |
橡膠配方配合劑.縮略語 |
Rubber compounding ingredients. Abbreviations. |
| NF T40-201-1976 |
輪胎.定義.詞匯 |
TYRES. DEFINITIONS. VOCABULARY |
| NF T40-202-1976 |
橡膠和合成橡膠.內胎.兩種語言（英、法）品名表 |
TYRE TUBES. BILINGUAL NOMENCLATURE (ENGLISH/FRENCH). |
| NF T42-001-1991 |
橡膠膠乳.取樣 |
Rubber latex. Sampling. |
| NF T42-002-1966 |
橡膠和同類合成橡膠.膠乳干膠膜的制備 |
RUBBER AND SIMILAR ELASTOMERS. PREPARATION OF DRY FILMS OF LATEX. |
| NF T42-003-1987 |
橡膠乳.固體物質總含量測定 |
Rubber latices. Determination of total solids content. |
| NF T42-004-1987 |
天然橡膠膠乳.干膠含量的測定 |
Rubber latex, natural. Determination of dry rubber content. |
| NF T42-005-1987 |
橡膠乳.碳?jí)A性測定 |
Rubber latex, natural. Determination of alkalinity. |
| NF T42-007-1973 |
橡膠和同類合成橡膠.天然橡膠膠乳中水提取物的測定 |
RUBBER AND SIMILAR ELASTOMERS. DETERMINATION OF AQUEOUS EXTRACT OF NATURAL RUBBER LATEX. |
| NF T42-010-1997 |
橡膠膠乳.凝結物(篩余物)含量的測定 |
Rubber latex. Determination of coagulum content (sieve residue). |
| NF T42-011-1987 |
橡膠乳.粘度測定 |
Rubber latex. Determination of viscosity. |
| NF T42-013-1987 |
天然橡膠乳.氫氧化鉀值測定 |
Rubber latex, natural. Determination of koh number. |
| NF T42-015-1997 |
橡膠膠乳.5℃-40℃間密度的測定 |
Rubber latex. Determination of density between 5 degrees Celsius and 40 degrees Celsius. |
| NF T42-016-1987 |
天然橡膠膠乳濃縮物.揮發性脂肪酸值的測定 |
Natural rubber latex concentrate. Determination of volatile fatty acid number. |
| NF T42-017-1987 |
天然橡膠膠乳濃縮物.硼酸含量的測定 |
Natural rubber latex concentrate. Determination of boric acid content. |
| NF T42-018-1987 |
合成橡膠乳.高速機械穩定性測定 |
Rubber latex, synthetic. Determination of high-speed mechanical stability. |
| NF T42-019-1987 |
天然橡膠膠乳濃縮物.殘?jiān)康臏y(cè)定 |
Natural rubber latex concentrate. Determination of sludge content. |
| NF T42-020-1977 |
膠乳稠化臨界溫度的測定 |
DETERMINATION OF THE CRITICAL THICKENING TEMPERATURE OF LATICES. |
| NF T42-021-1978 |
膠乳表面張力的測定 |
DETERMINATION OF THE SURFACE TENSION OF LATEX RUBBER. |
| NF T42-050-1987 |
合成橡膠膠乳.調制 |
Rubber latex, synthetic. Codification. |
| NF T42-051-1977 |
橡膠.腈漿.丙烯腈殘?jiān)康臏y(cè)定 |
RUBBER.NITRILE LATEX.DETERMINATION OF RESIDUAL ACRYLONITRILE CONTENT. |
| NF T42-101-1975 |
蒸發、保存天然橡膠膠乳.規范 |
NATURAL RUBBER LATEX EVAPORATED,PRESERVED - SPECIFICATION |
| NF T43-002-1954 |
橡膠.一定伸張度時單位負載能力的測定 |
RUBBER. DETERMINATION OF STRESS BY UNIT AREA CORRESPONDING TO A FIXED ELONGATION. |
| NF T43-003-1994 |
自然合成生橡膠.取樣及進一步準備程序 |
RUBBER, RAW, NATURAL SYNTHETIC. SAMPLING AND FUTHER PREPARATIVE PROCEDURES. |
| NF T43-005-1991 |
非硫化橡膠.帶圓切刀的稠度汁的使用方法 |
Non vulcanized rubber. Methods using a shearing disk viscometer. |
| NF T43-006-1997 |
橡膠試驗混合料.制備、混合和硫化.設備和程序 |
Rubber test mixes. Preparation, mixing and vulcanization. Equipment and procedures. |
| NF T43-007-1994 |
生合成橡膠.單件橡膠捆的標志 |
Raw synthetic rubber. In bales form. Individual marking. |
| NF T43-009-1988 |
橡膠和合成橡膠.異丁烯一異戊二烯橡膠.試驗方法 |
RUBBER,ISOBUTENE-ISOPRENE (IIR). EVALUATION PROCEDURES. |
| NF T43-010-1983 |
丁二烯一苯乙烯橡膠和加油丁二烯一苯乙烯.乳狀聚合物型.試驗配方和硫化特性的評定 |
STYRENE-BUTADIENE RUBBERS (SBR) AND OIL EXTENDED STYRENE BUTADIENE. EMULSION POLYMERISED TYPES. TEST RECIPE AND EVALUATION OF VULCANISATION CHARACTERISTICS. |
| NF T43-011-1992 |
聚丁橡膠.溶液聚合型.評定方法 |
RUBBER, BUTADIENE (BR). SOLUTION-POLYMERIZED TYPES. EVALUATION PROCEDURE. |
| NF T43-012-1992 |
異戊二烯橡膠(IR).非油擴散的溶液聚合型.評定程序 |
ISOPRENE RUBBER (IR). NON-OIL-EXTENDED, SOLUTION-POLYMERIZED TYPES. EVAUATION PROCEDURE. |
| NF T43-013-1994 |
非硫化橡膠.塑性測定.快速塑度計測定法 |
Unvulcanized rubber. Determination of plasticity. Rapid-plastimeter method. |
| NF T43-015-1996 |
橡膠.振蕩式硫化計測定橡膠混料硫化特性 |
Rubber. Measurement of vulcanization characteristics with the oscillating curemeter. |
| NF T43-016-1976 |
橡膠.橡膠混料擠壓成形性能的評定 |
EVALUATION OF THE EXTRUDABILITY OF RUBBER-BASED MIXTURES. |
| NF T43-017-1992 |
氯丁橡膠.通用型.評定方法 |
RUBBER, CHLOROPRENE RUBBER (CR). GENERAL PURPOSE TYPES. EVALUATION PROCEDURE. |
| NF T43-018-1992 |
乙丙二烯橡膠(EPDR).通用型.評定程序 |
RUBBER, ETHYLENE-PROPYLENE-DIENE (EPDM). GENERAL PURPOSE TYPES. EVALUATION PROCEDURE. |
| NF T43-019-1979 |
橡膠.生橡膠.平行板塑性計的可塑性和彈性恢復的測定 |
RAW RUBBER. MEASUREMENT OF PLASTICITY AND ELASTIC RECOVERY USING A PLASTOMETER WITH PARALLEL PLATES. |
| NF T43-020-1992 |
丁腈橡膠.評定方法 |
RUBBER, ACRYLONITRILE-BUTADIENE (NBR). EVALUATION PROCEDURE. |
| NF T43-021-1996 |
鹵化異丁烯一異戊二烯橡膠(BIIR和CIIR).鑒定程序 |
RUBBER, HALOGENATED ISOBUTENE-ISOPRENE (BIIR AND CIIR). EVALUATION PROCEDURE. |
| NF T43-022-1992 |
丁苯橡膠(炭黑或炭黑和油母煉膠).評定方法 |
RUBBER, STYRENE-BUTADIENE (CARBON BLACK OR CARBON BLACK AND OIL MASTERBATCHES). EVALUATION PROCEDURE. |
| NF T43-101-1992 |
生橡膠丙酮萃取物的測定 |
Determination of the acetone extract from raw rubber. |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com