標準號 |
中文名稱 |
英文名稱 |
| NF T54-019-1995 |
塑料管道和導管系統.未增塑聚氯乙烯(PVC-U)管和配件.粘度值的測定和K值的計算的樣品制備 |
(PLASTICS PIPING AND DUCTING SYSTEMS. PIPES AND FITTINGS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U). SPECIMEN PREPARATION FOR DETERMINATION OF THE VISCOSITY NUMBER AND CALCULATION OF THE K-VALUE. (EUROPEAN STANDARD EN 922).) |
| NF T54-020-1995 |
塑料.未增塑聚氯乙烯管.冷卻擴孔試驗 |
(Plastics. Pipes made of light weight unplasticized polyvinyl chloride. Cold flaring test.) |
| NF T54-024-1994 |
塑料管道系統.熱塑塑料管和配件.維卡軟化點的測定 |
(PLASTICS PIPING AND DUCTING SYSTEMS. THERMOPLASTICS PIPES AND FITTINGS. DETERMINATION OF VICAT SOFTENING TEMPERATURE (VST). (EUROPEAN STANDARD EN 727).) |
| NF T54-025-1995 |
塑料管道系統.熱塑塑料管.恒定低溫度下耐內壓性能的測定 |
(Plastics piping systems. Thermoplastics pipes. Determination of resistance to internal pressure at constant temperature.) |
| NF T54-029-1981 |
塑料.未增塑聚氯乙烯模制接頭.壓力系列.規范 |
(Plastics. Moulded unplasticized PVC fittings. Pressure series. Specifications.) |
| NF T54-036-1994 |
塑料管道和導管系統.注模熱塑配件.熱效應目視評定的試驗方法 |
(Plastics piping and ducting systems. Injection-moulded thermoplastics fitting. Test method for visually assessing effects of heating.) |
| NF T54-037-1981 |
塑料.未增塑聚氯乙烯管道件.生活污水無壓排放設備用密封圈接頭.使 用特性 |
(Plastics. Un-plasticized PVC parts dor piping. Simple assemblies with sealing rings for domestic water drainage piping. End use test. Specification.) |
| NF T54-038-1981 |
裝配有壓力管用密封圈的未增塑聚氯乙烯管和接頭.尺寸特性 |
(Unplasticized polyvinyl chloride pipes and fittings. Assembly by sealing rings for pressure pipelines. Dimensional caracteristics.) |
| NF T54-039-1988 |
塑料.未增塑聚氯乙烯壓力管用密封圈的固定接頭.使用特性.規范 |
(Plastics. Unplasticized polyvinyl chloride pipes and fittings. Assembly by sealing rings for pressure pipelines. Fitness for use.) |
| NF T54-040-1977 |
塑料.未增塑聚氯乙烯模制配件.尺寸 |
(PLASTICS.MOULDED UN-PLASTICIZED FITTINGS.DIMENSIONS.) |
| NF T54-041-1994 |
塑料管道系統.壓力管道用彈性密封圈型接頭的熱注塑料配件.耐無軸向力短暫內壓力性能的試驗方法 |
(Plastics piping systems. Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping. Test method for resistance to a short-term internal pressure without end thrust.) |
| NF T54-042-1994 |
塑料管道系統.壓力管道用溶劑-水泥膠合接頭的注模承窩配件 |
(Plastics piping systems. Injection-moulded socket fittings for solvent-cemented joints for pressure piping. Test method for resistance to a short-term internal hydrostatic pressure.) |
| NF T54-044-1978 |
塑料.聚乙烯管與接頭.按標定密度和熱融流動指數命名的聚乙烯的名稱 |
(POLYETHYLENE (PE) PIPES AND FITTINGS. DESIGNATION OF POLYETHYLENE BASED ON NOMINAL DENSITY AND MELT FLOW INDEX.) |
| NF T54-045-1994 |
塑料管道和導管系統.壓力管道系統用熱注塑料配件.最大變形的擠撞試驗法 |
(Plastics piping and ducting systems. Injection-moulded thermoplastics fittings for pressure piping systems. Test method for maximum deformation by crushing.) |
| NF T54-046-1978 |
低密度聚乙烯(PE-BD)管與配件.流體輸送管的化學穩定性 |
(LOW DENSITY POLYETHYLENE (PE-BD) PIPES AND FITTINGS. CHEMICAL RESISTANCE WITH RESPECT TO FLUIDS TO BE CONVEYED.) |
| NF T54-048-1977 |
塑料.低密度聚乙烯管.物理試驗用試樣的制備 |
(PLASTICS. LOW DENSITY POLYETHYLENE PIPES. PREPARATION OF SPECIMENS FOR PHYSICAL TESTING.) |
| NF T54-049-1977 |
塑料.聚乙烯管.管狀聚乙烯基準密度的計算 |
(EVALUATION OF THE REFERENCE DENSITY OF POLYETHYLENE IN FORM OF A PIPES.) |
| NF T54-050-1977 |
塑料.聚乙烯管.粒狀聚乙烯基準密度的計算 |
(EVALUATION OF THE REFERENCE DENSITY OF POLYETHYLENE IN FORM OF GRANULATES.) |
| NF T54-051-1979 |
聚乙烯管道.機械接頭的載荷減小.試驗方法與規 |
(Polyethylene pipes. Pressure drop in mechanical pipe-jointing systems. Method of test and requirements.) |
| NF T54-052-2001 |
人類飲用水輸送用塑料管道系統.遷移評定.塑料管和配件及其接頭遷移值的測定 |
(Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Determination of migration values of plastics pipes and fittings and their joints.) |
| NF T54-054-1997 |
塑料管道系統.未增塑聚氯乙烯端點負載軸承雙插座連接件.當彎曲和受到內壓時測定其防漏性和強度的試驗方法 |
(Plastics piping systems. Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double socket joints. Test method for leaktightness and strength while subjected to bending and internal pressure.) |
| NF T54-059-1995 |
壓力管道和配件用熱塑性塑料.分類和名稱與符號.總體設備的設計系數 |
(Thermoplastics materials for pipes and fittings for pressure applications. Classification and designation. Overall service (design) coefficient.) |
| NF T54-061-1978 |
聚丙烯(PP)管和配件.流體輸送管的化學穩定性 |
(POLYPROPYLENE (PP) PIPES AND FITTINGS. CHEMICAL RESISTANCE WITH RESPECT TO FLUIDS TO BE CONVEYED.) |
| NF T54-062-1-1999 |
建筑物內污物和污水排放(低、高溫)用塑料管道系統.聚丙烯(PP).第1部分:管道、配件和系統規范 |
(Plastics piping systems for soils and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1 : specifications for pipes, fittings and the system.) |
| NF T54-063-1-2003 |
供水用塑料管道系統.聚乙烯.第1部分:總則 |
(Plastics piping systems for water supply - Polyethylene (PE) - Part 1 : general.) |
| NF T54-063-1989 |
塑料.自來水網用的聚乙烯管子.規范和試驗方法 |
(PLASTICS. POLYETHYLENE PIPES FOR DRINKING WATER SUPPLY NETWORKS. SPECIFICATIONS AND TEST METHODS.) |
| NF T54-063-2-2003 |
供水用塑料管道系統.聚乙烯.第2部分:管道 |
(Plastics piping systems for water supply - Polyethylene (PE) - Part 2 : pipes.) |
| NF T54-063-3-2003 |
供水用塑料管道系統.聚乙烯.第3部分:配件 |
(Plastics piping systems for water supply - Polyethylene (PE) - Part 3 : fittings.) |
| NF T54-063-4-2003 |
供水用塑料管道系統.聚乙烯(PE).第4部分:閥 |
(Plastics piping systems for water supply - Polyethylene (PE) - Part 4 : valves.) |
| NF T54-063-5-2003 |
供水用塑料管道系統.聚乙烯.第5部分:系統適用性 |
(Plastics piping systems for water supply - Polyethylene (PE) - Part 5 : fitness for purpose of the system.) |
| NF T54-064-1990 |
塑料.帶緊箍的半離合器系統(吉可曼系統).公稱壓力PN6 |
(PLASTICS-HALF SYMMETRIC FITTING (GUILLEMIN SYSTEM) WITH LOCKING RING. NOMINAL PRESSURE PN 6.) |
| NF T54-065-1-2003 |
氣體燃料的塑料管道供應系統.聚乙烯(PE).第1部分:總則 |
(Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1 : general.) |
| NF T54-065-2-2003 |
氣體燃料的塑料管道供應系統.聚乙烯(PE).第2部分:管道 |
(Plastics piping systems for the supply of gaseous fuels - Polythylene (PE) - Part 2 : pipes.) |
| NF T54-065-3-2003 |
氣體燃料的塑料管道供應系統.聚乙烯(PE).第3部分:配件 |
(Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3 : fittings.) |
| NF T54-065-4-2003 |
氣體燃料的塑料管道供應系統.聚乙烯(PE).第4部分:閥門 |
(Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4 : valves.) |
| NF T54-065-5-2003 |
氣體燃料的塑料管道供應系統.聚乙烯(PE).第5部分:系統的配合 |
(Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 5 : fitness for purpose of the system.) |
| NF T54-070-1978 |
高密度聚乙烯(PE-HD)管和配件.流體輸送管的化學穩定性 |
(High density polyethelene (pe-hd) pipes and fittings. Chemical resistance with respect to fluids to be conveyed.) |
| NF T54-072-1981 |
塑料.“5”聚乙烯管.規范 |
(POLYETHYLENE PIPES “5“. SPECIFICATIONS.) |
| NF T54-075-1997 |
塑料管和管道系統.聚烯烴管和配件.氧化時間的測定(歐洲標準EN 728) |
(Plastics piping and ducting systems. Polyolefin pipes and fittings. Determination of oxidation induction time.) |
| NF T54-076-1992 |
塑料.聚乙烯塑料管道系統.標稱外徑125以上導管的耐緩慢龜裂性.試驗方法 |
(Plastics. Polyethylene (pe) plastics piping systems. Resistance to slow cracking of pipes with a nominal external diameter over 125. Test method.) |
| NF T54-077-1992 |
塑料.聚乙烯塑料管道系統.標稱外徑125及其以下導管的耐緩慢龜裂性.試驗方法 |
(Plastic. Polyethylene (pe) plastics piping systems. Resistance to slow cracking of pipes with a nominal external diameter up to 125. Test method.) |
| NF T54-078-1992 |
塑料.塑料管道系統用聚乙烯.極限應力強度因數的測定.試驗方法 |
(Plastics. Polyethylene (pe) for plastics piping systems. Determination of the limiting stress intensity factor. Test method.) |
| NF T54-080-2002 |
具有視覺特性的地下電纜和管線用塑料報警裝置 |
(Plastics warning devices for underground cables and pipelines with visual characteristics.) |
| NF T54-081-1987 |
塑料.飲用水供給用未增塑聚氯乙烯管(PVC-U).作為雜質的鎘和汞的可萃取性 |
(Plastics. Unplasticized polyvinyl chloride (PVC-U) pipes for drinking water supply. Extractability of cadmium and mercury occurring as impurities.) |
| NF T54-082-1988 |
塑料.熱固塑料閥.耐壓和密封性試驗 |
(PLASTICS. THERMOPLASTIC AND THERMOSETTING VALVES. TEST OF RESISTANCE TO PRESSURE.) |
| NF T54-083-1991 |
熱塑料制閥門.轉矩.試驗方法.(歐洲標準EN 28233) |
(THERMOPLASTICS VALVES. TORQUE. TEST METHOD. (EUROPEAN STANDARD EN 28233).) |
| NF T54-084-1991 |
熱塑料制閥門.耐疲勞強度.試驗方法.(歐洲標準EN 28659) |
(THERMOPLASTICS VALVES. FATIGUE STRENGTH. TEST METHOD. (EUROPEAN STANDARD EN 28659).) |
| NF T54-085-1988 |
塑料.液體壓力管用網狀線聚乙烯管.規范 |
(Plastics. Reticulate polyethylene pipes for pipelines under pressure. Specifications.) |
| NF T54-086-1990 |
塑料.地下灌溉用未增塑聚氯乙烯管.規格 |
(PLASTICS. UNPLASTICIZED POLY(VINYLCHLORIDE) (PVC-U) FOR UNDERGROUND IRRIGATION. SPECIFICATIONS.) |
| NF T54-087-1993 |
塑料管道系統.交聯聚乙烯(PE-X)管.溶劑萃取法測定交聯度 |
(PLASTICS PIPING SYSTEMS. CROSSLINKED POLYETHYLENE (PE-X) PIPES. DETERMINATION OF DEGREE OF CROSSLINKING BY SOLVENT EXTRACTION. (EUROPEAN STANDARD EN 579).) |
| NF T54-090-1976 |
塑料.未增塑聚氯乙烯和氯化聚氯乙烯管件.管和接頭顏色 |
(PLASTICS. UNPLASTICIZED AND CHLORINATED PVC PIPES. COLOUR OF PIPES AND FITTINGS.) |
| NF T54-095-1985 |
塑料.未增塑聚氯乙烯管件接頭粘合溶劑.使用特性 |
(Adhesive with solvents for assembly of unplasticized PVC pipe elements. Characterization. Basic test methods.) |
| NF T54-096-1985 |
塑料.未增塑聚氯乙烯管件裝配用溶劑膠粘劑.適用性 |
(ADHESIVES WITH SOLVENTS FOR ASSEMBLY OF UNPLASTICIZED PVC PIPE ELEMENTS. SUITABILITY FOR USE.) |
| NF T54-097-1995 |
塑料管道系統.熱塑管.耐連續吹風的試驗方法 |
(Plastics piping and ducting systems. Thermoplastics pipes. Test method for resistance to external blows by the round-the-clock method.) |
| NF T54-099-1987 |
承壓工業用熱塑料管.耐化學因素和基本約束因素的測定.第1部分:聚烯烴管 |
(THERMOPLASTICS PIPES FOR INDUSTRIAL APPLICATIONS UNDER PRESSURE. DETERMINATION OF THE CHEMICAL RESISTANCE FACTOR AND OF THE BASIC STRESS. PART 1 : POLYOLEFIN PIPES.) |
| NF T54-100-1997 |
塑料管道系統.熱塑閥門.外部送風后閥門完好性的測試方法 |
(Plastics piping systems. Thermoplastics valves. Test method for the integrity of a valve after an external blow.) |
| NF T54-101-1974 |
塑料.塑料板.外現和尺寸.檢驗方法 |
(PLASTIC SHEET. PRESENTATION AND DIMENSIONS. METHODS OF CONTROL.) |
| NF T54-103-1996 |
塑料.聚甲基丙烯酸甲酯雙合板和三合板.試驗方法 |
(PLASTICS. POLY(METHYL METHACRYLATE) DOUBLE- AND TRIPLE-SKIN SHEETS. TEST METHODS. (EUROPEAN STANDARD EN ISO 12017).) |
| NF T54-104-1970 |
塑料.塑料膜.柔軟性的評定.吊環法 |
(PLASTICS. SHEETS. ESTIMATE OF FLEXIBILITY. SUSPENDED LOOP METHOD.) |
| NF T54-105-1973 |
塑料.塑料膜.受熱后尺寸變化的測定.KAOLIN床法 |
(PLASTICS SHEETS. DETERMINATION OF DIMENSIONAL VARIATIONS AFTER HEATING. KAOLIN BED METHOD.) |
| NF T54-106-1980 |
塑料.薄膜.粘接的評定.剝離法 |
(Plastics. Sheets. Evaluation of the tendency to cohere. Peeling method.) |
| NF T54-107-1971 |
塑料.薄膜.抗撕斷強度的測定（非多孔試驗件） |
(PLASTICS. THIN SHEETS. DETERMINATION OF TEAR RESISTANCE (NON PERFORATED TEST PIECE).) |
| NF T54-108-1971 |
塑料.薄膜.抗撕斷擴張強度的測定 |
(PLASTICS. THIN SHEETS. DETERMINATION OF RESISTANCE TO TEAR PROPAGATION.) |
| NF T54-109-1973 |
塑料.薄膜.自由擊錘錐子法測定抗沖擊強度.DART試驗法 |
(PLASTICS. SHEETS. IMPACT RESISTANCE BY THE FREE FALLING DART METHOD.) |
| NF T54-110-1971 |
塑料.薄膜.不脆化常規極限溫度測定.（扣環沖擊） |
(PLASTICS. THIN SHEETS. DETERMINATION OF PLIABILITY LIMIT TEMPERATURE.(LOOPED TEST PIECE IMPACT TEST).) |
| NF T54-111-1971 |
塑料.聚乙烯透明塑料薄膜.通過對光線的擴散和傳播計算測定混濁度 |
(TRANSPARENT SHEETS OF POLYETHYLENE. DETERMINATION OF THE HAZE.) |
| NF T54-112-1980 |
塑料.薄膜.滑動性的測定.摩擦系數的測定 |
(Plastics. Sheets. Determination of the slippage. Measuring the friction coefficients.) |
| NF T54-113-1971 |
塑料.薄膜.薄膜平展性的檢驗 |
(PLASTICS MATERIALS. THIN SHEET. INSPECTION OF THE EVENNESS.) |
| NF T54-115-1973 |
塑料.薄膜.受熱后尺寸變化的測定.浸泡法 |
(PLASTIC SHEETS. DETERMINATION OF DIMENSIONAL VARIATIONS AFTER HEATING. IMMERSION METHOD.) |
| NF T54-116-1973 |
塑料.薄膜.抗穿孔強度的測定.穿孔法 |
(PLASTIC. SHEETS. DETERMINATION OF RESISTANCE TO PERFORATION. PERFORAMETRE METHOD.) |
| NF T54-118-2001 |
塑料.在大氣壓力下薄膜和薄板的透氣率的測定.測壓法 |
(Plastics - Determination of the gas transmission rate of films and thin sheets under atmospheric pressure - Manometric method.) |
| NF T54-119-1976 |
塑料.增塑聚氯乙烯塑料薄膜.高頻焊接試驗常規方法 |
(PLASTICS.PLASTICIZED PVC SHEETS. CONVENTIONAL TEST METHOD FOR HIGH FREQUENCY WELDING.) |
| NF T54-120-1976 |
塑料.薄膜.熱焊接試驗常規方法（熱棒法） |
(PLASTICS. SHEETS. ASSESSMENT OF SUITABILITY FOR THERMAL WELDING. (HOT BAR METHOD.)) |
| NF T54-121-1976 |
塑料.聚乙烯薄膜.化學試劑和恒定拉力作用下焊縫抗裂強度 |
(PLASTICS. THIN POLYETHYLENE SHEETS. RESISTANCE TO SPLITTING OF WELDS UNDER TENSILE STRESS IN THE PRESENCE OF CHEMICAL AGENTS.) |
| NF T54-122-1976 |
塑料.薄膜.張力試驗評定焊縫和或粘合質量 |
(PLASTICS. SHEETS. ASSESSMENT OF THE QUALITY OF A WELD OR BOND BETWEEN TWO SHEET ELEMENTS BY MEANS OF A TENSILE TEST.) |
| NF T54-123-1987 |
塑料.塑料薄膜.抗破裂強度的測定 |
(Plastics. Sheets. Determination of bursting strength.) |
| NF T54-124-1980 |
塑料薄膜和塑料片.印花特性 |
(PLASTICS SHEETS AND FILMS. IMPRESSIBILITY.) |
| NF T54-125-1993 |
塑料.聚乙烯,乙烯共聚物及其混合物制熱縮性薄膜.收縮應力的測定.試驗方法 |
(PLASTICS. HEATSHRINKABLE FILMS IN POLYETHYLENE, ETHYLEN COPOLYMERS AND THEIR MIXTURES. DETERMINATION OF THE SHRINKING AND CONTRACTION STRESSES. TEST METHOD.) |
| NF T54-140-1984 |
塑料.塑料片和塑料薄膜.抗撕裂強度的測定.第1部分:PANTALON撕裂法 |
(PLASTICS. FILM AND SHEETING. DETERMINATION OF TEAR RESISTANCE. PART 1 : TROUSER TEAR METHOD.) |
| NF T54-141-1984 |
塑料.塑料片和塑料薄膜.抗撕裂強度的測定.第2部分:ELMENDORF法 |
(PLASTICS. FILM AND SHEETING. DETERMINATION OF TEAR RESISTANCE. PART 2 : ELMENDORF METHOD.) |
| NF T54-150-1971 |
塑料.薄膜.卷軸內徑 |
(PLASTICS MATERIALS. SHEET. WINDING MANDRELS. INTERNAL DIAMETERS.) |
| NF T54-190-2002 |
農業和園藝上使用的覆蓋熱塑薄膜 |
(Covering thermoplastic films for use in agriculture and horticulture.) |
| NF T54-191-1994 |
塑料.農業用薄膜.纏結標記用可延伸薄膜.使用可膨脹性的測定 |
(PLASTICS. FILMS FOR AGRICULTURAL USE. EXTENSIBLE THIN FILMS FOR TAPING AND SILAGE MAKING. DETERMINATION OF SWEETABILITY FOR USE.) |
| NF T54-192-2003 |
塑料.農業和園藝用塑料膜.安裝和使用條件 |
(Plastics - Plastics films for agriculture and horticulture - Conditions for installation and use.) |
| NF T54-195-2000 |
塑料.農業土壤消毒用薄膜.溴代甲烷隔膜規范和試驗方法 |
(Plastics - Films for agricultural soil desinfection - Specification for methyl bromide barrier films and test methods.) |
| NF T54-196-1-1997 |
塑料.可伸展薄膜.第1部分:可伸展薄膜特性測定的常規方法 |
(PLASTICS. STRETCHABLE FILMS. PART 1 : CONVENTIONAL METHOD FOR DETERMINING THE PROPERTIES OF STRETCHABLE FILMS.) |
| NF T54-196-2-1998 |
塑料.可伸展薄膜.第2部分:螺旋箍裝箱用可伸展薄膜適合性測定 |
(PLASTICS. STRETCHABLE FILMS. PART 2 : DETERMINATION OF THE SUITABILITY FOR USE OF STRETCHABLE FILMS FOR HELICOID HOOP CASING.) |
| NF T54-202-2002 |
青儲飼料熱塑膜 |
(Silage thermoplastic films.) |
| NF T54-300-1-2003 |
普通用水、排水、污水地上和地下壓力系統用塑料管道系統.聚乙烯(PE).第1部分:總則 |
(Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 1 : general.) |
| NF T54-300-2-2003 |
普通用水、排水、污水地上和地下壓力系統用塑料管道系統.聚乙烯(PE).第2部分:管道 |
(Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 2 : pipes.) |
| NF T54-300-3-2003 |
普通用水、排水、污水地下和地上壓力系統用塑料管道系統.聚乙烯(PE).第3部分:管件 |
(Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 3 : fittings.) |
| NF T54-300-4-2003 |
普通用水、排水、污水地下和地上壓力系統用塑料管道系統.聚乙烯(PE).第4部分:閥門 |
(Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 4 : valves.) |
| NF T54-300-5-2003 |
普通用水、排水、污水地下和地上壓力系統用塑料管道系統.聚乙烯(PE).第5部分:系統的適用性 |
(Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 5 : fitness for purpose of the system.) |
| NF T54-301-1-1991 |
飾面用高壓層壓板(HPL).熱固性樹脂板.第1部分:規格(歐洲標準 EN 438-1) |
(DECORATIVE HIGH-PRESSURE LAMINATES (HPL). SHEETS BASED ON THERMOSETTING RESINS. PART 1 : SPECIFICATIONS. (EUROPEAN STANDARD EN 438-1).) |
| NF T54-301-2-1991 |
飾面用高壓層壓板(HPL).熱固性樹脂板.第2部分:特性測定.(歐洲標準 EN 438-2) |
(DECORATIVE HIGH-PRESSURE LAMINATES (HPL). SHEETS BASED ON THERMOSETTING RESINS. PART 2 : DETERMINATION OF PROPERTIES. (EUROPEAN STANDARD EN 438-2).) |
| NF T54-320-1979 |
飾面用層壓板.高壓飾面用層壓板的加工指南(按照T54-301“S”型) |
(DECORATIVE LAMINATED SHEET. GUIDE TO THE PROCESSING OF HIGH PRESSURE DECORATIVE LAMINATED SHEETS. (TYPE “S“ T 54-301).) |
| NF T54-401-1-2003 |
塑料.聚甲基丙烯酸甲酯薄板材.類型、尺寸和特性.第1部分:澆注薄板材 |
(Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 1 : cast sheets.) |
| NF T54-401-2-1997 |
塑料.聚(甲基丙-烯酸甲酯)塑料薄片.類型,尺寸和性能.第2部分:熔壓擠出薄片(EN ISO 7823-2) |
(Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics. Part 2 : melt-calendered extruded sheets.) |
| NF T54-401-2-2003 |
塑料.聚甲基丙烯酸甲酯薄板材.類型、尺寸和特性.第2部分:擠制薄板材 |
(Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 2 : extruded sheets.) |
| NF T54-402-1995 |
塑料.聚碳酸酯薄板材.類型、尺寸和特性 |
(PLASTICS. POLYCARBONATE SHEETS. TYPES, DIMENSIONS AND CHARACTERISTICS. (EUROPEAN STANDARD EN ISO 11963).) |
| NF T54-404-1999 |
聚乙烯(PE-HD)的擠壓片材.要求和試驗方法 |
(EXTRUDED SHEETS OF POLYETHYLENE (PE-HD). REQUIREMENTS AND TEST METHODS. (EUROPEAN STANDARD EN ISO 14632).) |
| NF T54-405-1-2002 |
外部用的未增塑的聚氯乙烯擠壓或合成擠壓產品.規范和試驗方法.第1部分:固體墻聚氯乙烯板材 |
(Unplasticized poly(vinyl chloride) (PVC-U) extruded or coextruded profiles for outside use - Specifications and test methods - Part 1 : solid wall PVC-U.) |
| NF T54-406-1996 |
塑料.園藝溫室用單個或復合墻板.聯合規范和特殊特點.評估方法 |
(PLASTICS. SINGLE OR MULTIPLE WALL RIGID SHEETS FOR HORTICULTURAL GREENHOUSES. JOINT SPECIFICATIONS AND SPECIAL CHARACTERISTICS. ASSESSMENT METHODS.) |
| NF T54-407-1999 |
聚丙烯擠壓片材(PP).要求和試驗方法 |
(EXTRUDED SHEETS OF POLYPROPYLENE (PP). REQUIREMENTS AND TEST METHODS. (EUROPEAN STANDARD EN ISO 15013).) |
| NF T54-408-1999 |
沖擊改良的聚苯乙烯(PS-I)的擠壓片.要求和試驗方法 |
(EXTRUDED SHEETS OF IMPACT-MODIFIED POLYSTYRENE (PS-I). REQUIREMENTS AND TEST METHODS. (EUROPEAN STANDARD EN ISO 14631).) |
| NF T54-412-2000 |
焊接熱塑結構的特性值.熱塑性設備設計用允許應力和模數的測定 |
(Characteristic values for welded thermoplastics constructions - Determination of allowable stresses and moduli for design of thermoplastic equipment.) |
| NF T54-422-2003 |
塑料.農業和園藝用熱塑性塑料薄膜覆蓋物 |
(Plastics - Mulching thermoplastic films for use in agriculture and horticulture.) |
| NF T54-503-1976 |
塑料.輕塑料制品.拉力性能的測定 |
(LIGHT PLASTICS PRODUCTS. DETERMINATION OF TENSILE PROPERTIES.) |
| NF T54-504-1976 |
塑料.輕塑料制品.彎曲試驗 |
(LIGHT PLASTICS PRODUCTS. BENDING TEST.) |
| NF T54-505-1976 |
塑料.輕塑料制品.抗沖擊強度試驗 |
(LIGHT PLASTICS PRODUCTS. IMPACT RESISTANCE TEST.) |
| NF T54-601-1987 |
塑料夾層結構定義.機械特性的測定 |
(Plastics based sandwich structures. Determination of mechanical properties. Definitions.) |
| NF T54-602-1983 |
塑料夾層結構.垂直擠壓試驗 |
(PLASTICS BASED SANDWICH STRUCTURES. PERPENDICULAR COMPRESSION TEST.) |
| NF T54-603-1983 |
塑料夾層結構.垂直拉力試驗 |
(PLASTICS BASED SANDWICH STRUCTURES. PERPENDICULAR TENSILE TEST.) |
| NF T54-604-1986 |
塑料夾層結構.火焰彎曲或無火焰彎曲縱向擠壓試驗 |
(Plastics based sandwich structures. Longitudinal compression test without or with buckling.) |
| NF T54-605-1983 |
塑料夾層結構.抗剪強度的測定 |
(PLASTICS BASED SANDWICH STRUCTURES. DETERMINATION OF SHEAR STRENGTH.) |
| NF T54-606-1987 |
塑料夾層結構.彎曲試驗 |
(Plastics based sandwich structures. Bend test.) |
| NF T54-701-1988 |
塑料.熱固樹脂基層壓板.規范 |
(PLASTICS. INDUSTRIAL LAMINATED SHEETS BASED ON THERMOSETTING RESINS. SPECIFICATION.) |
| NF T54-801-1992 |
塑料.自助餐廳托盤.規范和試驗方法 |
(PLASTICS. TRAYS FOR SELF-SERVICE RESTAURANTS. SSPECIFICATION AND TEST METHODS.) |
| NF T54-803-1-1994 |
塑料.游泳池用增塑聚氯乙烯薄膜.規范和試驗方法.第1部分:普通薄膜 |
(PLASTICS. PLASTICIZED POLYVINYL CHLORIDE MEMBRANES FOR SWIMMING-POOLS. SPECIFICATIONS AND TEST METHODS. PART 1 : SIMPLE MEMBRANES.) |
| NF T54-803-2-1994 |
塑料.游泳池用增塑聚氯乙烯薄膜.規范和試驗方法.第2部分:增強薄膜 |
(PLASTICS. PLASTICIZED POLYVINYL CHLORIDE MEMBRANES FOR SWIMMING-POOLS. SPECIFICATIONS AND TEST METHODS. PART 2 : REINFORCED MEMBRANES.) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com