標準號 |
中文名稱 |
英文名稱 |
| NF C26-214-1993 |
用差式掃描量熱法測定電絕緣材料溶化和結晶的熱量和溫度 |
(Determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry.) |
| NF C26-215-1982 |
絕緣材料的試驗方法.固體電絕緣材料體電阻率和表面電阻率的試驗方法 |
(Method of testing insulating materials. Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials.) |
| NF C26-218-1972 |
絕緣材料的試驗方法. 高溫絕緣材料的絕緣電阻率和橫向電阻率的試驗方法 |
(Methods of testing insulating materials. Method of test for electrial resistance and resistivity of insulating materials at elevated temperatures.) |
| NF C26-220-1980 |
絕緣材料的試驗方法.潮濕條件下固體絕緣材料的電阻指數和滲透特性的測定方法 |
(Method of testing insulating materials. Method for determining the comparative and the proof tracking indices of solid insulating materials under moist conditions.) |
| NF C26-220-2003 |
固體絕緣材料的比較起痕指數和耐泄痕指數的測定方法 |
(Method for the determination of the proof and the comparative tracking indices of solid insulating materials.) |
| NF C26-221-1986 |
電絕緣材料的測試方法.評估惡劣的環境條件下使用的電絕緣材料的擊穿和腐蝕電阻 |
(Methods of testing isulating materials. Test methods for evaluating resistance to tracking and erosion of electrical insulating materials used under severe ambient conditions.) |
| NF C26-222-1995 |
電氣絕緣材料.抗電弧和侵蝕性的評定方法.常規輪浸蝕試驗 |
(Electrical insulating materials. Method to evaluate the resistance to tracking and erosion. Rotating wheel dip test.) |
| NF C26-226-1998 |
絕緣材料介電強度.試驗方法.第1部分:功率頻率試驗 |
(Electrical strength of insulating materials. Test methods. Part 1 : tests at power frequencies.) |
| NF C26-227-2001 |
隔熱材料的電強度.試驗方法.第2部分:使用直接電壓的附加要求 |
(Electric strengh of insulating materials - Test methods - Part 2 : additional requirements for tests using direct voltage.) |
| NF C26-228-2002 |
絕緣材料的介電強度.試驗方法.第3部分:1,2/50 微秒脈沖試驗的補充要求 |
(Electrical strengh of insulating materials - Test methods - Part 3 : additional requirements for 1,2/50 micro second impulse tests.) |
| NF C26-230-1970 |
絕緣材料的試驗方法.測定工頻、音頻和無線電頻率用電絕緣材料介電常數和離散因子的推薦方法 |
(Methods of testing insulating materials. Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating material at power, audio and radio freq.) |
| NF C26-231-1974 |
絕緣材料的試驗方法.測定高于300MHz 的絕緣材料介電特性的推薦方法 |
(Methods of testing insulating materials.recommended methods for thedetermination of the dielectric properties of insulating material at frequencies above 300 MHz.) |
| NF C26-231/AM1-1978 |
絕緣材料的試驗方法.絕緣材料在頻率為300MHz以上時的介電特性的推薦測定方法 |
(METHODS OF TESTING INSULATING MATERIALS. RECOMMENDED METHODS FOR THE DETERMINATION OF THE DIELECTRIC PROPERTIES OF INSULATING MATERIAL AT FREQUENCIES ABOVE 300 MHZ.) |
| NF C26-231M1-1978 |
絕緣材料的試驗方法.絕緣材料在頻率為300MH2以上時的介電特性的推薦測定方法 |
(METHODS OF TESTING INSULATING MATERIALS. RECOMMENDED METHODS FOR THE DETERMINATION OF THE DIELECTRIC PROPERTIES OF INSULATING MATERIAL AT FREQUENCIES ABOVE 300 MHZ.) |
| NF C26-235-1-1994 |
電絕緣材料的液壓穩定性的試驗方法.第1部分:塑料薄膜 |
(Method of test for the hydrolic stability of electrical insulating materials. Part 1 : plastic films.) |
| NF C26-235-2-1998 |
電氣絕緣材料.液壓穩定性試驗方法.第2部分:模制熱固 |
(Electrical insulating materials. Methods of test for the hydrolytic stability. Part 2 : moulded thermosets.) |
| NF C26-240-1993 |
測定由表面放電擊穿絕緣材料的相對電阻的推薦性測定方法 |
(Recommanded test methods for determining the relative resistance of insulating materials to breakdown by surface discharges.) |
| NF C26-245-1990 |
絕緣漆熱降低介電強度評價法.穩定性的試驗方法 |
(Test procedure for thermal indurance of insulating varnishes. Electric strength method.) |
| NF C26-250/A1-1983 |
NF C 26-250-1963的補充件1 |
() |
| NF C26-2501-1983 |
補充1 |
() |
| NF C26-251-1980 |
絕緣材料的試驗方法.電絕緣材料用塑料薄膜和塑料紙摩擦系數的測定方法 |
(Methods of testing insulating materials. Method of test for coefficients of friction of plastic film and sheeting for use as electrical insulation.) |
| NF C26-260-1974 |
絕緣材料的試驗方法.有絕緣材料時測定電解腐蝕性的試驗方法 |
(Methods of testings insulating materials test methods for determining electrolytic corrosion with insulating materials.) |
| NF C26-270-1975 |
絕緣材料的試驗方法.新的和老化的電工用紙中等聚合粘度的測定 |
(Mesurement of the average viscosimetric degree of polymerization ofnew and aged electrical papers.) |
| NF C26-280-1978 |
絕緣材料的試驗方法.用液體提取法測定絕緣材料中離子雜質的試驗方法 |
(Methods of testing insulating materials. Methods of test for the determination of ionic impurities in electrical insulating materials by extraction with liquids.) |
| NF C26-285-1996 |
浸漬劑對漆包線底襯的附著強度的測定試驗方法 |
(Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate.) |
| NF C26-287-1998 |
干燥,固體絕緣材料.云母基絕緣材料.一般規定 |
(Dry, solid insulating materials. Resistance test to high-voltage, low-current arc discharges.) |
| NF C26-290-1-1995 |
電器絕緣材料.確定電離輻射的影響.第1部分:輻射感應和劑量測定 |
(Electrical insulating materials. Determination of the effects of ionizing radiation. Part 1 : radiation interaction and dosimetry.) |
| NF C26-290-2-1993 |
測定絕緣材料電離輻射效應的指南.第2部分:輻射和試驗方法 |
(Guide for determining the effects of ionizing radiation on insulating materials. Part 2 : procedures for irradiation and test.) |
| NF C26-290-4-1993 |
對絕緣材料的離子輻射力的測定指南.第4部分:在輻射環境中設施的分類體系 |
(Guide for determining the effects of ionizing radiation on insulating materials. Part 4 : classification system for service in radiation environnements.) |
| NF C26-290-5-2003 |
電絕緣材料.確定電離輻射的影響.第5部分:在使用過程中的老化評定方法 |
(Electrical insulation materials - Determinination of the effects of ionising - radiation - Part 5 : procedures for assessment of ageing in service.) |
| NF C26-291-1994 |
帶電表面放電評定指南 |
(Guide for evaluating the discharges from a charged surface.) |
| NF C26-300-2002 |
電氣絕緣系統(EIS).熱度分級 |
(Electrical insulation systems (EIS) - Thermal classification.) |
| NF C26-301-2002 |
電絕緣材料.耐熱性能.第1部分:老化過程和試驗結果評定 |
(Electrical insulating materials - Properties of thermal endurance - Part 1 : ageing procedures and evaluation of test results.) |
| NF C26-302-1990 |
電絕緣材料熱穩定性的測定.試驗準則選擇 |
(Determination of thermal endurance properties of electrical insulating materials. Choice of test criteria.) |
| NF C26-303-2002 |
電絕緣材料.耐熱性能.第3部分:耐熱性計算說明 |
(Electrical insulating materials - Thermal endurance properties - Part 3 : instructions for calculating thermal endurance characteristics.) |
| NF C26-304-1990 |
電絕緣材料耐熱性能測定.老化爐.第1節.單室爐 |
(Determination of thermal endurance properties of electrical insulating materials. Ageing ovens. Section 1 : single-chamber ovens.) |
| NF C26-304-2-2001 |
電絕緣材料.耐熱性能.第4-2部分:老化爐.300℃以下使用的精確爐 |
(Electrical insulating materials - Thermal endurance properties - Part 4-2 : ageing ovens - Precision ovens for use up to 300 oC.) |
| NF C26-304-3-2000 |
電絕緣材料.耐熱性.第4-3部分:老化烘箱.多室烘箱 |
(Electrical insulating materials - Thermal endurance properties - Part 4-3 : ageing ovens - Multi-chamber ovens.) |
| NF C26-305-2003 |
電絕緣材料.耐熱特性.第5部分:絕緣材料相對耐熱指數(RTE)的測定 |
(Electrical insulating materials - Thermal endurance properties - Part 5 : determination of relative thermal endurance index (RTE) of an insulating material.) |
| NF C26-306-1994 |
電絕緣材料耐熱性試驗的分析試驗方法的應用指南 |
(Guidelines for application of analytical test methods for thermal endurance testing of electrical insulating materials.) |
| NF C26-310-1-1999 |
電絕緣系統.熱評估程序.第1部分:總要求.低壓 |
(Electrical insulation systems. Procedures for thermal evaluation. Part 1 : general requirements. Low-voltage.) |
| NF C26-310-21-1999 |
電絕緣系統.熱評估程序.第21部分:一般用途模型的特殊要求.線繞設備 |
(Electrical insulation systems. Procedures for thermal evaluation. Part 21 : specific requirements for general-purpose model. Wire-wound applications.) |
| NF C26-310-22-2003 |
電氣絕緣結構.熱評定規程.第22部分:密閉線圈模型的特殊要求.線繞電氣絕緣結構(EIS) |
(Electrical insulation systems - Procedures for thermal evaluation - Part 22 : specific requirements for encapsulated-coil model - Wire-wound electrical insulation system (EIS).) |
| NF C26-310-23-2003 |
電氣絕緣結構.熱評定規程.第23部分:通用深槽模型的特殊要求.線繞電氣絕緣結構(EIS) |
(Electrical insulation systems - Procedures for thermal evaluation - Part 23 : specific requirements for general purpose, tall-channel model - Wire-wound electrical insulation system (EIS).) |
| NF C26-315-2000 |
電氣絕緣系統.對已建成的繞阻線的EIS的改進的熱性能的評估 |
(Ellectrical insulation systems - Thermal evaluation of modifications to an established wire-wound EIS.) |
| NF C26-401-1-1995 |
陶瓷和玻璃絕緣材料.第1部分:定義和分類 |
(Ceramic and glass insulating materials. Part 1 : definitions and classifications.) |
| NF C26-401-2-2000 |
陶瓷和玻璃絕緣材料.第2部分:試驗方法 |
(Ceramic and glass insulating materials - Part 2 : methods of test.) |
| NF C26-401-3-1998 |
陶瓷和玻璃絕緣材料.第3部分:單個材料的規范 |
(Ceramic and glass-insulating materials. Part 3 : specifications for individual materials.) |
| NF C26-433-1972 |
氧化鈹基陶瓷.（氧化鈹?shù)暮扛哂诎俜种攀牛?電子微型結構絕緣體用.規范 |
(BERYLLIUM OXIDE CERAMICS. (BERYLLIUM OXIDE CONTENT ABOVE 99 PER CENT) FOR INSULATING SUBSTATES FOR ELECTRONIC MICROSTRUCTURES. SPECIFICATION.) |
| NF C26-501-1-2002 |
陶瓷材料和件的壓電特性.第1部分:術語和定義 |
(Piezoelectric properties of ceramic materials and components - Part 1 : terms and definitions.) |
| NF C26-501-2-2002 |
陶瓷材料和件的壓電特性.第2部分:低功率測量方法 |
(Piezoelectric properties of ceramic materials and components - Part 2 : methods of measurement - Low power.) |
| NF C26-501-3-2002 |
陶瓷材料和件的壓電特性.第3部分:高功率測量方法 |
(Piezoelectric properties of ceramic materials and components - Part 3 : properties and methods of measurement - High power.) |
| NF C26-915/A1-1983 |
NF C 26-915-1965的補充件1 |
() |
| NF C26-9151-1983 |
補充1 |
() |
| NF C26-936/A1-1983 |
NF C 26-936-1965的補充件1 |
() |
| NF C26-9361-1983 |
C26-936-85的補充1 |
() |
| NF C26-941-1999 |
電絕緣用清漆.第1部分:定義和總要求 |
(Varnishes used for electrical insulation. Part 1 : definitions and general requirements.) |
| NF C26-942-2002 |
電絕緣用清漆.第2部分:試驗方法 |
(Varnisches used for electrical insulation - Part 2 : methods of test.) |
| NF C26-943-1-2002 |
電絕緣用清漆.第3部分:單項材料規范.表1:室溫固化飾面清漆 |
(Varnishes used for electrical insulation - Part 3 : specifications for individual materials - Sheet 1 : ambient curing finishing varnishes.) |
| NF C26-943-2-2002 |
電絕緣用清漆.第3部分:單項材料規范.表2:熱固化浸漬清漆 |
(Varnishes used for electrical insulation - Part 3 : specifications for individual materials - Sheet 2 : hot curing impregnating varnishes.) |
| NF C26-961-1994 |
加感印制電路板用敷層(保形敷層)規范.第1部分:定義、分類及一般要求 |
(Specification for coatings for loaded printed wire boards (conformal coatings). Part 1 : definitions, classification and general requirements.) |
| NF C26-962-1994 |
加感印制電路板用敷層(保形敷層)規范.第2部分:試驗方法 |
(Specification for coatings for loaded printed wire boards (conformal coatings) . Part 2 : methods of test.) |
| NF C26-963-1-1995 |
加感印制電路板用涂覆層(保形敷層).第3部分:專用材料規范.活頁1:通用(I類)和高可靠性(II類)涂層 |
(Coatings for loaded printed wire boards (conformal coatings). Part 3 : specifications for individual materials. Sheet 1 : coatings for general purpose (class i) and for high reliability (class ii).) |
| NF C27-101/A1-1987 |
NF C 27-101-1982的補充1 |
() |
| NF C27-1011-1987 |
C27-101-82的補充1 |
() |
| NF C27-104-1994 |
絕緣油.合成芳香烴基新鮮油的規范 |
(Insulating liquids. Specifications for unused liquids based on synthetic aromatic hydrocarbons.) |
| NF C27-105-1991 |
新聚丁烯的規范 |
(Specification for unused polybutenes.) |
| NF C27-106-1990 |
電工技術用流體.充油電纜用新絕緣礦物油的規范(歐州標準 EN 60456) |
(Fluides for electrotechnical applications. Specification for unused insulating mineral oils for cables with oil ducts.) |
| NF C27-110-1993 |
鑒定老化以后礦質絕緣油流動特性的方法 |
(Method for evaluating the low temperature flow properties of mineral insulating oils after ageing.) |
| NF C27-115-1999 |
礦物絕緣油.甚低溫時運動粘度的測定 |
(Mineral insulating oils. Determination of kinematic viscosity at very low temperatures.) |
| NF C27-120-1986 |
電工技術用流體.除PCB 外，變壓器（liHT）用的鹵化絕緣液體.綜合.試驗方法.規范 |
(FLUIDS FOR ELECTROTECHNICAL APPLICATIONS. HALOGENOUS ISOLATING LIQUIDS FOR TRANSFORMERS,OTHER THAN PCB. GENERAL. TEST METHODS. SPECIFICATIONS.) |
| NF C27-131-1993 |
電氣用硅液的規范 |
(Specifications for silicone liquids for electrical purposes.) |
| NF C27-132-1994 |
含硅變壓器液體的維護指南 |
(Guide for the maintenance of silicone transformer liquids.) |
| NF C27-135-2003 |
絕緣油.用顯微鏡計數法測定纖維污染 |
(Insulating oil - Determination of fibre contamination by the counting method using a microscope.) |
| NF C27-137-2002 |
電絕緣油用的抹布的測試方法 |
(Testing methodology for wipers used in electrical insulating oil.) |
| NF C27-140-1995 |
石油產品和潤滑劑.三重磷酸脂渦輪控制流體.規范 |
(Petroleum products and lubricants. Triaryl phosphate ester turbine control fluids (category iso-L-tcd). Specifications.) |
| NF C27-210-1979 |
絕緣液體的相對介電常數.介電損耗和電阻系數（直流電）的測定 |
(Measurement of relative permittivity dielectric dissipation factor and D.C. Resistivity of insulating liquids.) |
| NF C27-218-1988 |
電子技術用液體.絕緣液體在雷擊時被擊穿強度的測定方法 |
(Fluids for electrotechnical applications. Methods for the determination of the lighting impulse breakdown-voltage of insulating liquids.) |
| NF C27-221-1995 |
絕緣液.工業頻率下?lián)舸╇妷旱臏y(cè)定.試驗方法 |
(Insulating liquids. Determination of the breakdown voltage at power frequency. Test method.) |
| NF C27-222-1990 |
電氣設備中用絕緣礦物油的檢驗和維護 |
(Supervision and maintenance guide for mineral insulating oils in electrical equipment.) |
| NF C27-224-1992 |
浸油電設備氣體和油的抽樣指南和游離及溶解氣體的分析指南 |
(Guide for the sampling of gases and of oil from oil-filled electrical equipment and for the analysis of free and dissolved gases.) |
| NF C27-225-1978 |
絕緣物質的試驗方法.新礦物絕緣油中芳香烴含量的測定 |
(Determination of the aromatic hydrocarbon content of new mineral insulating oils.) |
| NF C27-226-1998 |
絕緣液.油浸紙和紙板.用自動庫侖計卡爾.費歇爾滴定法測定水含量新礦物絕緣油中芳香烴含量的測定 |
(Insulating liquids. Oil-impregnated paper and pressboard. Determination of water by automatic coulometric Karl Fischer titration.) |
| NF C27-227-1981 |
絕緣油中專用抗氧化添加劑含量的檢測和測定 |
(Detection and determination of specified anti-oxidant additives in insulating oils.) |
| NF C27-228-1-1995 |
電工用非纖維素紙.第1部分:定義和一般要求 |
(Non-cellulosic papers for electrical purposes. Part 1 : definitions and general requirements.) |
| NF C27-228-1/A1-1997 |
NF EN 60819-1-1995的修改1 |
() |
| NF C27-228-11-1997 |
1995年NF C 27-228-1的補充件1 |
() |
| NF C27-228-2-2002 |
電工用非纖維素紙.第2部分:試驗方法 |
(Non-cellulosic papers for electrical purposes - Part 2 : methods of test.) |
| NF C27-228-3-1-2002 |
電工用非纖維素紙.第3部分:單項材料規范.第1活頁:填充玻璃砂紙 |
(Non-cellulosic papers for electrical purposes - Part 3 : specifications for individual materiels - Sheet 1 : filled glass paper.) |
| NF C27-228-3-2-2002 |
電工用非纖維素紙.第3部分:單項材料規范.第2活頁:混合無機-有機紙 |
(Non-cellulosic papers for electrical purposes - Part 3 : specifications for individual materiels - Sheet 2 : hybrid inorganic-organic paper.) |
| NF C27-228-3-4-2002 |
電工用非纖維素紙.第3部分:單項材料規范.第4活頁:含不超過50%的云母粒子的芳族纖維紙 |
(Non-cellulosic papers for electrical purposes - Part 3 : specifications for individual materiels - Sheet 4 : aramid fibre paper containing not more than 50 % of mica particles.) |
| NF C27-229-1985 |
絕緣油、紙張及油浸紙板中形成水含量的測定 |
(Determination of water in insulating oils, and in oil-impregnated paper and pressboard.) |
| NF C27-230-1986 |
電工技術用流體.在電壓和電離作用下，液化絕緣氣體 |
(Fluids for electrotechnical applications. Gassing of insulating liquids under electrical stress and ionization.) |
| NF C27-231-1989 |
蒸汽輪機中石油潤滑油的使用和保護指南 |
(Maintenance and use guide for petroleum lubricating oils for steam turbines.) |
| NF C27-232-1990 |
在液體絕緣中微粒形態和數目確定的方法 |
(Methods for counting and sizing particles in insulating liquids.) |
| NF C27-233-1990 |
汽輪機用磷酸鹽酯調節流體的使用和維護指南 |
(Maintenance and use guide for triaryl phosphate ester turbine control fluids.) |
| NF C27-234-1990 |
電工技術用流體.利用密封柱氣相色譜法測量絕緣礦物油中的聚氯聯二苯 |
(Determination of polychlorinated biphenyle (pcbs) in mineral insulating oils by packed column gas chromatography (gc).) |
| NF C27-235-1993 |
未用過的烴基絕緣液體.評定氧化穩定性的試驗方法 |
(Unused hydrocarbon-based insulating liquids. Test methods for evaluating the oxidation stability.) |
| NF C27-236-1997 |
絕緣液.多氯聯苯的污染度.毛細管氣相色譜測定法 |
(Insulating liquids. Contamination by polychlorinated biphenyls (PCBs). Method of determination by capillary column gas chromatography.) |
| NF C27-237-1999 |
絕緣液體.測量電導率和電容確定介質離散因子 |
(Insulating liquids. Determination of the dielectric dissipation factor by measurement of the conductance and capacitance. Test method.) |
| NF C27-239-1999 |
使用中的浸礦物油的電氣設備.溶解和游離氣體分析說明指南 |
(Mineral oil-impregnated electrical equipment in service. Guide to the interpretation of dissolved and free gases analysis.) |
| NF C27-240-1993 |
浸漬絕緣材料.關于電氣設備制造試驗的溶解氣體的分析應用(歐洲標準 EN 61 181) |
(Impregnated insulating materials. Application of dissolved gas analysis (dga) to factory tests on electrical equipment.) |
| NF C27-250-1993 |
絕緣液的氧指數測定試驗方法 |
(Test method for the determintation of oxygen index of insulating liquids.) |
| NF C27-252-1995 |
絕緣油.火焰線性傳播.使用玻璃纖維的試驗方法 |
(Insulating liquids. Linear flame propagation. Test method using a glass-fibre tape.) |
| NF C27-253-1994 |
礦物絕緣油.2-糖醛及相關化合物的測定方法 |
(Mineral insulating oils. Methods for the determination of 2-furfural and related compounds.) |
| NF C27-300-1988 |
液體電介質根據燃燒性能的分類 |
(CLASSIFICATION OF LIQUID DIELECTRICS ACCORDING TO THEIR FIRE BEHAVIOUR.) |
| NF C27-301-1992 |
按燃點和凈熱值的絕緣油的分類 |
(Classification of insulating liquids according to fire point and net calorific value.) |
| NF C27-350-1993 |
絕緣液的一般分類 |
(General classification of insulating liquids.) |
| NF C27-450-1992 |
電工用新鮮合成有機酯的規范 |
(Specification for unused synthetic organic esters for electrical purposes.) |
| NF C27-451-1994 |
電工用合成有機酯.設備中變壓器酯的維護指南 |
(Synthetic organic esters for electrical purposes. Guide for maintenace of transformer esters in equipment.) |
| NF C27-475-1975 |
液體介質的取樣方法 |
(Method of sampling liquid dielectrics.) |
| NF C27-601-1978 |
在電氣設備上提取的六氟化硫的檢驗指南 |
(Specification and acceptance of new sulphur hexafluoride.) |
| NF C28-495-2002 |
繼電器用磁性材料(鋼鐵) |
(Magnetic materials (iron and steel) for use in relays.) |
| NF C28-900-1996 |
冷軋非顆粒結構定向最終退火裝態下的電工鋼片和鋼帶 |
(Cold rolled non-oriented electrical steel sheet and strip delivered in the fully processed state.) |
| NF C28-911-1997 |
磁性材料.中等頻率下電工鋼片和電工鋼帶的磁性測量的方法 |
(Magnetic materials. Methods of measurement of magnetic properties of magnetic steel sheet and strip at medium frequencies.) |
| NF C28-912-1997 |
磁性材料.測定電工鋼片和電工鋼帶幾何特性值的方法 |
(Magnetic materials. Methods of determination of the geometrical characteristics of electrical steel sheet and strip.) |
| NF C28-913-2001 |
磁性材料.用單片測試計測定電工鋼片和電工鋼帶磁性的方法 |
(Magnetic materials - Methods of measurement of the magnetic properties of electrical sheet and strip by means of a single sheet tester.) |
| NF C28-916-2001 |
磁性材料.測定電工鋼片和電工鋼帶抗表面絕緣性的試驗方法 |
(Magnetic materials - Method of test for the determination of surface insulation resistance of electrical sheet and strip.) |
| NF C28-917-2003 |
磁性材料.第14部分:用拔出或旋轉法測量鐵磁材料試樣磁偶極矩的方法 |
(Magnetic materials - Part 14 : methods of measurement of the magnetic dipole moment of a ferromagnetic material specimen by the withdrawal or rotation method.) |
| NF C28-918-1998 |
磁性材料.第4部分:鋼和鐵直流電磁特性的測定方法 |
(Magnetic materials. Part 4 : methods of measurement of d.c. magnetic properties of iron and steel.) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com