標準號 |
中文名稱 |
英文名稱 |
| NF E29-303-2-2000 |
閥門.閥體、閥蓋和閥套用材料.第2部分:歐洲標準中沒有規定的鋼 |
(Valves - Materials for bodies, bonnets and covers - Part 2 : steels other than those specified in European Standards.) |
| NF E29-303-3-2000 |
閥門.閥體、閥蓋和閥套用材料.第3部分:歐洲標準中規定的鑄鐵 |
(Valves - Materials for bodies, bonnets and covers - Part 3 : cast iron specified in European Standards.) |
| NF E29-303-4-2003 |
閥門.閥體、閥蓋和閥套用材料.第4部分:歐洲標準中規定的銅合金 |
(Valves - Materials for bodies, bonnets and covers - Part 4 : copper alloys specified in European Standards.) |
| NF E29-305-1999 |
工業閥門.鋼閥門對縫焊接末端.(歐洲標準EN 12627) |
(INDUSTRIAL VALVES. BUTT WELDING ENDS FOR STEEL VALVES. (EUROPEAN STANDARD EN 12627).) |
| NF E29-306-1-1995 |
閥.術語.第1部分:閥型的定義 |
(Valves. Terminology. Part 1 : definition of types of valves.) |
| NF E29-306-2-1997 |
閥門.術語.第2部分:閥門件的定義 |
(VALVES. TERMINOLOGY. PART 2 : DEFINITION OF COMPONENTS OF VALVES. (EUROPEAN STANDARD EN 736-2).) |
| NF E29-306-3-1999 |
閥門.術語.第3部分:術語的定義 |
(VALVES. TERMINOLOGY. PART 3 : DEFINITION OF TERMS. (EUROPEAN STANDARD EN 736-3).) |
| NF E29-306-3/A1-2001 |
閥門.術語.第3部分:術語定義 |
(Valves - Terminology - Part 3 : definition of terms.) |
| NF E29-308-1985 |
工業閥門.技術規范和協調訂貨證明書樣式 |
(INDUSTRIAL VALVES. TECHNICAL SPECIFICATIONS AND CONFORMITY WITH ORDER ATTESTATION MODELS.) |
| NF E29-309-2001 |
工業閥門.操作件尺寸控制的方法 |
(Industrial valves - Method for sizing the operating element.) |
| NF E29-310-1992 |
通用工業閥的標記 |
(Marking of general purpose industrial valves.) |
| NF E29-311-1-2003 |
工業閥門.閥門試驗.第1部分:壓力試驗、試驗程序和驗收標準.強制性要求 |
(Industrial valves - Testing of valves - Part 1 : pressure tests, test procedures and acceptance criteria - Mandatory requirements.) |
| NF E29-311-1982 |
閥門.閥門制造設備的工廠壓力試驗 |
(Valves. Factory pressure testing for valves.) |
| NF E29-311-2-2003 |
工業閥門.閥門試驗.第2部分:試驗、試驗程序和驗收標準.補充標準 |
(Industrial valves - Testing of valves - Part 2 : tests, test procedures and acceptance criteria - Supplementary criteria.) |
| NF E29-313-1990 |
工業閥門.閥門輸送量的測定 |
(Industrial valves. Determination of flow of valves. Case of compressible fluids.) |
| NF E29-314-1986 |
閥門.試驗.術語.方法 |
(VALVES. TESTS. NOMENCLATURE. METHODOLOGY.) |
| NF E29-316-1-2000 |
供水用閥門.適用性要求和專用檢查試驗.第1部分:一般要求 |
(Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 1 : general requirements.) |
| NF E29-316-2-2000 |
供水用閥門.適用性要求和專用檢查試驗.第2部分:隔離閥 |
(Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 2 : isolating valves.) |
| NF E29-316-3-2000 |
供水用閥門.適用性要求和專用檢查試驗.第3部分:止回閥 |
(Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 3 : check valves.) |
| NF E29-316-4-2000 |
供水閥門.特殊目的要求和適合驗證試驗的適配性. 第4部分:空氣閥門 |
(Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 4 : air valves.) |
| NF E29-316-5-2001 |
供水用閥門.適用性要求和專用檢查試驗.第5部分:控制閥門 |
(Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5 : control valves.) |
| NF E29-317-1999 |
工業閥門.化工和石油化工加工工業閥門.要求和試驗 |
(Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests.) |
| NF E29-318-2000 |
工業閥門.LNG隔絕閥門.合適性和驗證試驗規范 |
(Industrial valves - Isolating valves for LNG - Specification for suitability and appropriate verification tests.) |
| NF E29-319-2003 |
最大工作壓力為16bar及以下的配氣系統用閥.性能要求 |
(Valves for gas distribution systems with maximum operating pressure less than or equal 16 bar - Performance requirements.) |
| NF E29-321-1999 |
閥門.用水作為試驗液體的流動阻力試驗 |
(Valves - Test of flow resistance using water as test fluid.) |
| NF E29-330-2000 |
工業閥門.鋼插板閥門 |
(Industrial valves - Steel gate valves.) |
| NF E29-332-2003 |
工業用閥.鑄鐵閘閥 |
(Industrial valves - Cast iron gate valves.) |
| NF E29-334-2003 |
工業用閥門.銅合金閘閥 |
(Industrial valves - Copper alloy gate valves.) |
| NF E29-335-2003 |
石油和天然氣工業用尺寸為DN 100及更小的鋼閘閥、球閥和止回閥 |
(Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries.) |
| NF E29-350-2003 |
工業用閥.鋼制球閥、球狀截止閥和止回閥 |
(Industrial valves - Steel globe and globe stop and check valves.) |
| NF E29-354-2003 |
工業用閥.鑄鐵球閥 |
(Industrial valves - Cast iron globe valves.) |
| NF E29-372-2001 |
工業閥門.鑄鐵止回閥 |
(Industrial valves - Cast iron check valves.) |
| NF E29-373-1984 |
工業閥門.止回閥.鋼制，單搖板式，帶法蘭盤,ISO標準壓力16，20，25，40，50，100 |
(Industrial valves. Flanged steel swing check valves. ISO PN A6, ISO PN 20, ISO PN 25, ISO PN 40, ISO PN 50, ISO PN 100.) |
| NF E29-382-1981 |
工業閥門.加壓和放壓的加厚部件 |
(Industrial valves. Drain hoss or pressure tap.) |
| NF E29-383-1981 |
工業閥門.閘閥.旁路裝置 |
(Industrial valves. Gate valve. By-pass.) |
| NF E29-401-1996 |
工業閥門.多圈旋轉閥門驅動器附件 |
(Industrial valves. Multi-turn valve actuator attachments.) |
| NF E29-402-2001 |
工業閥門.部分回轉閥門致動器附件 |
(Industrial valves - Part-turn valve actuator attachments.) |
| NF E29-408-1992 |
工業用閥門.電力驅動器.規范 |
(INDUSTRIAL VALVES. ELECTRIC ACTUATORS. SPECIFICATIONS.) |
| NF E29-409-1992 |
工業閥門.氣動的和液壓的促動器.規范 |
(INDUSTRIAL VALVES. PNEUMATIC AND HYDRAULIC ACTUATORS. SPECIFICATIONS.) |
| NF E29-413-1989 |
工業閥門.安全閥流量計算.其他方法 |
(INDUSTRIAL VALVE. SAFETY VALVES AND BURSTING DISC(S) DEVICES. CALCULATION OF THEORETICAL FLOWRATE.) |
| NF E29-414-1992 |
工業閥門.安全閥門.安全閥門類型S,G1,L1和L2流率計算示例 |
(INDUSTRIAL VALVES. SAFETY VALVES. EXAMPLES FOR FLOWRATE CALCULATION OF SAFETY VALVES TYPES S,G1,L1 AND L2.) |
| NF E29-415-1990 |
工業閥門.安全閥.G平方型安全閥排出空氣當量流量計算實例.GPL標準蓄水池的應用 |
(INDUSTRIAL VALVES. SAFETY VALVES. CALCULATION OF AIR EQUIVALENT FLOW CAPACITY FOR SAFETY VALVES OF TYPE G2. APPLICATION FOR STANDARD VESSELS FOR GPL.) |
| NF E29-417-2-2003 |
過壓保護安全設備.第2部分:防爆盤安全設備 |
(Safety devices for protection against excessive pressure - Part 2 : bursting disc safety devices.) |
| NF E29-420-1985 |
工業閥門.安全閥.技術說明書樣式和協調證明書 |
(INDUSTRIAL VALVES. SAFETY AND RELIEF VALVES. MODEL OF TECHNICAL SPECIFICATIONS AND CONFORMITY CERTIFICATE.) |
| NF E29-421-1987 |
工業閥門.安全閥.安全膜.為獲得工作特性的安裝規范 |
(Industrial valves. Safety valves. Bursting discs.) |
| NF E29-425-1987 |
工業閥門.防爆膜裝置.定義.一般設計.試驗.分類.標記.調節 |
(Industrial valves. Bursting discs devices. Definitions. General design. Test. Classification. Marking. Conditioning.) |
| NF E29-430-1998 |
工業閥門.金屬蝶型閥門 |
(Industrial valves. Metallic butterfly valves.) |
| NF E29-440-1992 |
水蒸氣自動排泄閥.分類.(歐洲標準 EN 26704) |
(Automatic steam traps. Classification.) |
| NF E29-441-1992 |
水蒸氣自動排泄閥.標記(歐洲標準EN26553) |
(Automatic steam traps. Marking.) |
| NF E29-442-1992 |
帶法蘭盤的汽水自動分離器.間距尺寸 |
(Flanged automatic steam traps. Face-to-face dimensions.) |
| NF E29-443-1992 |
水蒸氣自動排泄閥.產品試驗和功能特性試驗(歐洲標準 EN 26948) |
(Automatic steam traps. Production and performance characteristics tests.) |
| NF E29-444-1992 |
汽水自動分離器.蒸汽損耗的測定.試驗方法 |
(Automatic steam traps. Determination of steam loss. Test methods.) |
| NF E29-445-1992 |
水蒸氣自動排泄閥.流量測定.試驗方法.(歐洲標準 EN 27842) |
(Automatic steam traps. Determination of discharge capacity. Test methods.) |
| NF E29-453-2000 |
工業過程控制閥門 |
(Industrial process control valves.) |
| NF E29-465-1986 |
工業閥門.旋轉閥.銅鋁球閥.規范 |
(INDUSTRIAL VALVES. CUPRO-ALUMINIUM BALL VALVES. SPECIFICATION.) |
| NF E29-466-1987 |
工業閥門.旋轉閥.黃銅球閥.規范 |
(INDUSTRIAL VALVES. BRASS BALL-VALVES. SPECIFICATIONS.) |
| NF E29-480-1994 |
地下熱水管網的預隔熱管道系統.鋼制供水管道、聚氨基甲酸乙酯熱絕緣材料及高密度聚乙烯外殼的鋼閥門組件(歐 |
(Preinsulated bonded pipe systems for underground hot water networks. Steelvalve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene.) |
| NF E29-492-2002 |
工業閥門.金屬材料的薄片閥 |
(Industrial valves - Diaphragm valves made of metallic materials.) |
| NF E29-531-1981 |
管道.凸肩對接的螺紋連接管.標準壓力10 |
(Pipework. Threaded fittings with gasket on shoulder.) |
| NF E29-539-1981 |
管道.采暖設備上的球錐連接螺紋連接管部件.標準壓力16 |
(Pipework. Screwed connecting part with a spheroconical function for heating plants.) |
| NF E29-551-1939 |
鋼制氣體螺距的連接管.雙接頭 |
(STEEL CONNECTIONS WITH GAS THREAD. DOUBLE NIPPLES.) |
| NF E29-552-1936 |
鋼制氣體螺距的連接管.套筒和連接螺帽 |
(STEEL CONNECTIONS WITH GAS THREAD. SOCKET AND JOINT NUT.) |
| NF E29-553-1936 |
鋼制氣體螺距的連接管.T形管 |
(STEEL CONNECTIONS WITH GAS THREAD. TEES.) |
| NF E29-554-1936 |
鋼制氣體螺距的連接管.全圖 |
(STEEL CONNECTIONS WITH GAS THREAD. OVERALL VIEW.) |
| NF E29-571-1957 |
非金屬軟管用的螺紋連接管(噴淋用等) |
(SCREWED CONNECTIONS FOR NON-METALLIC FLEXIBLE HOSE (HOSE FOR WATERING ETC.).) |
| NF E29-572-1969 |
對稱半邊連接管(吉耶曼系統).公稱壓力16 |
(QUARTER TURN CONNECTIONS (GUILLEMIN SYSTEM). NOMINAL PRESSURE PN 16.) |
| NF E29-573-1988 |
工業管道.“特快“連接管，公稱壓力”10 |
(Industrial pipework. “Express“ connections. Maximum permissible working pressure 1 MPa (10 bar).) |
| NF E29-577-1978 |
管道.工具和氣動機械用的螺紋連接管 |
(PIPEWORKS. SCREWED CONNECTIONS FOR PNEUMATIC TOOLS AND MACHINES.) |
| NF E29-591-1-1998 |
銅和銅合金.管道配件.第1部分:銅管毛細管終端焊接配件 |
(Copper and copper alloys. Plumbing fittings. Part 1 : fittings with ends for capillary soldering or capillary brazing to copper tubes.) |
| NF E29-591-2-1998 |
銅和銅合金.管道配件.第2部分:用于銅管的壓縮終端配件 |
(COPPER AND COPPER ALLOYS. PLUMBING FITTINGS. PART 2 : FITTINGS WITH COMPRESSION ENDS FOR USE WITH COPPER TUBES. (EUROPEAN STANDARD EN 1254-2).) |
| NF E29-591-3-1998 |
銅和銅合金.管道配件.第3部分:用于塑料管的壓縮終端配件 |
(COPPER AND COPPER ALLOYS. PLUMBING FITTINGS. PART 3 : FITTINGS WITH COMPRESSION ENDS FOR USE WITH PLASTICS PIPES. (EUROPEAN STANDARD EN 1254-3).) |
| NF E29-591-4-1998 |
銅和銅合金.管道配件.第4部分:用毛細或壓縮終端連接于其它終端的配件 |
(COPPER AND COPPER ALLOYS. PLUMBING FITTINGS. PART 4 : FITTINGS COMBINING OTHER END CONNECTIONS WITH CAPILLARY OR COMPRESSION ENDS. (EUROPEAN STANDARD EN 1254-4).) |
| NF E29-591-5-1998 |
銅和銅合金.管道配件.第4部分:銅管毛細管釬焊短末端配件 |
(COPPER AND COPPER ALLOYS. PLUMBING FITTINGS. PART 5 : FITTINGS WITH SHORT ENDS FOR CAPILLARY BRAZING TO COPPER TUBES. (EUROPEAN STANDARD EN 1254-5).) |
| NF E29-600-1987 |
工業管道.鋼制連接管和螺塞.插接式焊接連接管.螺紋連接管和螺塞 |
(Industrial pipework. Steel fittings and plugs. Socket welding fittings.) |
| NF E29-645-1-1999 |
可運輸儲氣瓶.氣體和氣體混合物.第1部分:純氣體的特性 |
(Transportable gas cylinders. Gases and gas mixtures. Part 1 : properties of pure gases.) |
| NF E29-645-2-1997 |
可運輸?shù)拿簹馄?氣體和氣體混合物.第2部分:氣體和氣體混合物的潛在易燃性和氧化能力的測定 |
(Transportable gas cylinders. Gases and gas mixtures. Part 2 : determination of flammability and oxidizing ability of gases and gas mixtures.) |
| NF E29-648-2-2001 |
可移動式液化氣鋼瓶.內有氣體的鋼瓶和閥材料的配合性.第2部分:非金屬材料 |
(Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2 : non-metallic materials.) |
| NF E29-648-3-1998 |
可運輸氣瓶.氣瓶和含氣閥門材料的可兼容性.第3部分:有氧環境中自燃試驗 |
(Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contents. Part 3 : autogenous ignition test in oxygen atmosphere.) |
| NF E29-650-1992 |
氣瓶.閥出口連接 |
(Gas cylinders. Valve outlet connections.) |
| NF E29-661-1979 |
氯瓶上的鍛鋼閥門(最大容量60kg).公稱壓力25 |
(FORGED-STEEL VALVES FOR CHLORINE CYLINDERS (MAX.CAPACITT 60 KG). NOMINAL PRESSURE PN 25.) |
| NF E29-662-1979 |
呼吸保護裝置的壓縮氣瓶的閥門.使用壓力200bar.尺寸特性.標記 |
(VALVES FOR COMPRESSED AIR CYLINDERS FOR RESPIRATORY PROTECTIVE EQUIPMENT. SERVICE PRESSURE 200 BAR. DIMENSIONAL CHARACTERISTICS. MARKING.) |
| NF E29-663-1979 |
呼吸保護裝置的壓縮氣瓶的閥門.使用壓力300bar.尺寸特性.標記 |
(VALUES FOR COMPRESSED AIR CYLINDERS FOR RESPIRATORY PROTECTIVE EQUIPMENT. SERVICE PRESSURE 300 BAR. DIMENSIONAL CHARACTER & STICS. MARKING.) |
| NF E29-664-1979 |
氣瓶閥門出口.標準化提供的和使用中的裝置對照表 |
(VALVE OUTLETS FOR GAS CYLINDERS. LIST OF STANDARD PROVISIONS OR THOSE IN USE.) |
| NF E29-670-1998 |
可運輸儲氣瓶.儲氣瓶閥門配件 |
(Transportable gas cylinders. Fitting of valves to gas cylinders.) |
| NF E29-671-1981 |
氣瓶.閥門裝配錐體.總則 |
(Gas cylinders. Taper screw thread for value stem and cylinder neck assembly. General.) |
| NF E29-672-1-1999 |
氣瓶.氣瓶閥門連接用17E錐螺紋.第1部分:規范 |
(Gas cylinders. 17E taper thread for connection of valves to gas cylinders. Part 1 : specifications.) |
| NF E29-672-2-1999 |
氣瓶.閥門與氣瓶的連接用17E錐螺紋.第2部分:檢驗量規 |
(Gas cylinders. 17E taper thread for connection of valves to gas cylinders. Part 2 : inspection gauges.) |
| NF E29-674-1-1996 |
可運輸氣瓶.閥與氣瓶連接用25E錐形螺紋.第1部分:規范 |
(Transportable gas cylinders. 25E taper thread for connection of valves to gas cylinders. Part 1 : specification.) |
| NF E29-674-2-1996 |
可運輸氣瓶.閥與氣瓶連接用25E錐形螺紋.第2部分:量規檢查 |
(Transportable gas cylinders. 25E taper thread for connection of valves to gas cylinders. Part 2 : gauge inspection.) |
| NF E29-677-1981 |
氣瓶.閥門裝配錐體.公稱直徑28.3.錐度3/25.螺距1.814惠氏螺紋.檢驗規范 |
(GAS CYLINDERS. TAPER SCREW THREAD FOR VALVE STEM AND CYLINDER NECK ASSEMBLY. NOMINAL DIAMETER : 28,3. TAPER 3/25. 14 TPI SI. GAUGE REQUIREMENTS.) |
| NF E29-678-1980 |
氣瓶.氣瓶閥門頸裝配螺紋錐體.公稱直徑16.4.錐度3/20.螺距14國際單位制 |
(GAS CYLINDERS. TAPER SCREW THREAD FOR VALVE STEM AND CYLINDER NECK ASSEMBLY. NOMINAL DIAMETER 16,4,TAPER 3/20,14 TPI SI.) |
| NF E29-679-1981 |
氣瓶.氣瓶閥門頸裝配錐體.公稱直徑16.4.錐度3/20.螺距14國際單位制.量規要求 |
(GAS CYLINDERS. TAPER SCREW THREAD FOR VALVE STEM AND CYLINDER NECK ASSEMBLY. NOMINAL DIAMETER 16.4. TAPER 3/20. 14 TPI SI. GAUGE REQUIREMENTS.) |
| NF E29-680-1980 |
氣瓶.閥桿和瓶頸組件用錐螺紋.公稱直徑25.8.錐度3/26(6°38`).螺距1.814國際單位制 |
(GAS CYLINDERS. TAPER SCREW THREAD FOR VALVE STEM AND CYLINDER NECK ASSEMBLY. NOMINAL DIAMETER 25,8,TAPER 3/26 (6 DEGREES 38`,14 TPI SI) |
| NF E29-681-1981 |
氣瓶.閥桿和瓶頸組件用錐螺紋.公稱直徑25.8.錐度3/26(6°C 38`).螺距1.814國際單位制.量規要求 |
(GAS CYLINDERS. TAPER SCREW THREAD FOR VALVE STEM AND CYLINDER NECK ASSEMBLY. NOMINAL DIAMETER 25,8. TAPER 3/26 (6 DEGREES C 38`). 14 TP1 SI. GAUGE REQUIREMENTS.) |
| NF E29-682-1980 |
氣瓶.閥桿和瓶頸組件用錐螺紋.公稱直徑34.錐度8.732％(5°).螺距為2國際單位制 |
(GAS CYLINDERS. TAPER SCREW THREAD FOR VALVE STEM AND CULINDER NECK ASSEMBLY. NOMINAL DIAMETER 34 TAPER 8 732 PER CENT (5 DEGREES),PITCH 2 SI.) |
| NF E29-683-1981 |
氣瓶.閥桿和瓶頸組件用錐螺紋.公稱直徑34.錐度8.736％(5°C).螺距為2國際單位制.量規要求 |
(GAS CYLINDERS. TAPER SCREW THREAD FOR VALVE STEM AND CYLINDER NECK ASSEMBLY. NOMINAL DIAMETER 34. TAPER 8.736 PER CENT (5 DEGREES C). PITCH 2 SI. GAUGE ERQUIREMENTS.) |
| NF E29-684-1980 |
氣瓶.閥桿和瓶頸組件用錐螺紋.公稱直徑26.錐度1/16(3°34`).螺距為1.814錐管螺紋 |
(GAS CYLINDERS. TAPER SCREW THREAD FOR VALVE STEM AND CYLINDER NECK ASSEMBLY. NOMINAL DIAMETER 26,TAPER 1/16 (3 DEGREES 34`),14 TPI NPT.) |
| NF E29-685-1981 |
氣瓶.閥桿和瓶頸組件用錐螺紋.公稱直徑26.錐度1/16(3°34`).螺距為1.814錐管螺紋.量規要求 |
(GAS CYLINDERS. TAPER SCREW THREAD FOR VALVE STEM AND CYLINDER NECK ASSEMBLY. NOMINAL DIAMETER 26. TAPER 1/16 (3 DEGREES 34`). 14 TPI NPT. GAUGE REQUIREMENTS.) |
| NF E29-686-1-2002 |
儲氣瓶.連接儲氣瓶閥門的平行螺紋.第1部分:規范 |
(Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification.) |
| NF E29-686-2-2002 |
儲氣瓶.連接儲氣瓶閥門的平行螺紋.第2部分:量規檢驗 |
(Gas cylinders - Parallel threads for correction of valves to gas cylinders - Part 2 : Gauge inspection.) |
| NF E29-690-1996 |
可運輸氣瓶.氣瓶閥.規范和型式試驗(EN 849) |
(Transportable gas cylinders. Cylinder valves. Specification and type testing.) |
| NF E29-690/A1-1999 |
NF EN 849-1996的修改件1 |
() |
| NF E29-690/A2-2001 |
可移動的燃?xì)馄?燃?xì)馄块y門.規范和型式試驗 |
(Transportable gas cylinders - Cylinder valves - Specification and type testing.) |
| NF E29-6901-1999 |
1996年NF E 29-690的補充件1(EN 849的補充件1) |
() |
| NF E29-691-1996 |
可運輸氣瓶.工業和醫用氣瓶用閥保護帽和閥罩.設計,安裝和試驗 |
(Transportable gas cylinders - Valve protection caps and valve guards for industrial and medical gas cylinders - Design, construction and tests.) |
| NF E29-691/A1-1999 |
可運輸儲氣瓶.工業用和醫用儲氣瓶用閥保護帽和閥護罩.設計、結構和試驗 |
(Transportable gas cylinders - Valve protection caps and valve guards for industrial and medical gas cylinders - Design, construction and tests.) |
| NF E29-691/A2-2000 |
便攜式氣瓶.工業和醫用氣瓶用閥門保護裝置.設計,結構和試驗 |
(Transportable gas cylinders - Valve protection caps and valve guards for industrial and medical gas cylinders - Design, construction and tests.) |
| NF E29-692-1-2001 |
氣瓶.微電子工業用氣瓶閥接頭.第1部分:輸出口接頭 |
(Gas cylinders - Gas cylinder valve connections for use in the micro-electronics industry - Part 1 : outlet connections.) |
| NF E29-692-2-2001 |
氣瓶.微電子工業用氣瓶閥接頭.第2部分:氣瓶閥接頭的規范和型式試驗 |
(Gas cylinders - Gas cylinder valve connections for use in the microelectronics industry - Part 2 : specification and type testing for valve to cylinder connections.) |
| NF E29-693-1-2001 |
氣體鋼瓶.壓縮呼吸空氣的氣體鋼瓶的出口連接.第1部分:軛型連接 |
(Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 1 : Yoke type connections.) |
| NF E29-693-2-2001 |
氣體鋼瓶.壓縮呼吸空氣的氣體鋼瓶的出口連接.第2部分:螺紋連接 |
(Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 2 : threaded connections.) |
| NF E29-693-3-2001 |
氣體鋼瓶.壓縮呼吸空氣的氣體鋼瓶的出口連接.第3部分:230巴閥門適配器 |
(Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 3 : adaptor for 230 bar valves.) |
| NF E29-694-2001 |
可運輸氣瓶.氣瓶閥門.生產試驗和檢驗 |
(Transportable gas cylinders - Gas cylinder valves - Manufacturing tests and inspections.) |
| NF E29-695-2001 |
可運輸氣瓶.不可再充填的氣瓶用閥門.規范和原型試驗 |
(Transportable gas cylinders - Cylinders valves for non-refillable cylinders - Specification and prototype testing.) |
| NF E29-720-1974 |
真空技術.高真空連接件.基本原理 |
(VACUUM TECHNOLOGY. HIGH VACUUM CONNECTIONS. BASIC PRINCIPLES) |
| NF E29-721-1974 |
真空技術.高真空用法蘭盤.尺寸 |
(VACUUM TECHNOLOGY. HIGH VACUUM FLANGES. DIMENSIONS) |
| NF E29-722-1974 |
真空技術.高真空管頸用旋轉法蘭盤.裝配環形件.尺寸 |
(VACUUM TECHNOLOGY. HIGH VACUUM ROTATABLE FLANGES FOR USE WITH COLLARS. COLLAR RETAINING RINGS. DIMENSIONS) |
| NF E29-723-1974 |
真空技術.高真空管頸.尺寸 |
(VACUUM TECHNOLOGY HIGH VACUUM COLLARS. DIMENSIONS) |
| NF E29-724-1974 |
真空技術.高真空帶卡箍的快速連接管.尺寸 |
(VACUUM TECHNOLOGY. CLAMPED TYPE QUICK RELEASE COUPLINGS FOR HIGH VACUUM. DIMENSIONS) |
| NF E29-726-1974 |
真空技術.真空管道用鋼管.尺寸 |
(VACUUM TECHNOLOGY. STEEL TUBES FOR VACUUM PIPES. DIMENSIONS) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com