標準號 |
中文名稱 |
英文名稱 |
| NF E58-050-1995 |
土方機械.安全.第1部分:總要求 |
(Earth-moving machinery. Safety. Part 1 : general requirements.) |
| NF E58-050/A1-1998 |
修改件1 |
() |
| NF E58-0501-1998 |
1995年NF E 58-050的補充件1 |
() |
| NF E58-052-1998 |
土方機械.進出檢查系統 |
(Earth-moving machinery. Access systems.) |
| NF E58-053-2000 |
土方機械.翻車保護結構.實驗室試驗和性能要求 |
(Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements.) |
| NF E58-054-2000 |
土方機械.物體降落保護結構.實驗室試驗和性能要求 |
(Earth-moving machinery - Falling-object protective structures - Laboratory tests and performance requirements.) |
| NF E58-055-1996 |
土方機械.輪式機械.制動系統的性能要求和試驗程序 |
(EARTH-MOVING MACHINERY. BRAKING SYSTEMS OF RUBBER-TYRED MACHINES. SYSTEMS AND PERFORMANCE REQUIREMENTS AND TEST PROCEDURES. (EUROPEAN STANDARD EN ISO 3450).) |
| NF E58-056-1995 |
土方機械.擋板和護罩.定義和規范(歐洲標準EN ISO 3457) |
(Earth-moving machinery. Guards and shields. Definitions and specifications.) |
| NF E58-059-1987 |
土方機械.操作儀表 |
(Earth-moving machinery. Operating instrumentation.) |
| NF E58-061-1978 |
土方機械.測定重心 |
(EARTHMOVING MACHINERY. DETERMINATION OF THE CENTER OF GRAVITY.) |
| NF E58-062-1998 |
土方機械.拖拉機和農林機械.座位標記點 |
(Earth-moving machinery, and tractors and machinery for agriculture and forestry. Seat index point.) |
| NF E58-068-1999 |
土方機械.座椅安全帶和座椅安全帶固定件 |
(Earth-moving machinery. Seat belts and seat belt anchorages.) |
| NF E58-069-1987 |
土方機械.維護和保管 |
(Earth-moving machinery. Preservation and storage.) |
| NF E58-070-1998 |
土方機械.鏟斗容量分配 |
(Earth-moving machinery. Volumetric ratings for backhoe buckets.) |
| NF E58-072-1987 |
土方機械.行駛速度的測定 |
(Earth-moving machinery. Determination of ground speed.) |
| NF E58-073-1995 |
土方機械.液壓挖掘機.機械過加載的測量方法 |
(EARTH-MOVING MACHINERY. HYDRAULIC EXCAVATORS. METHODS OF MEASURING TOOL FORCES.) |
| NF E58-074-2000 |
土方機械.操作員座位振動的實驗室評價 |
(Earth-moving machinery - Laboratory evaluation of operator seat vibration.) |
| NF E58-076-1998 |
土方機械.整機、設備和零件的質量測量方法 |
(Earth-moving machinery. Methods of measuring the masses of whole machines, their equipment and components.) |
| NF E58-077-1989 |
土方機械.液壓挖土機.反鏟測定體積評價 |
(EARTH-MOVING MACHINERY. HYDRAULIC EXCAVATORS AND BACKHOE LOADERS. VOLUMETRIC RATING FOR HOE BUCKET. COMPLETE METHOD.) |
| NF E58-078-1984 |
土方機械.鏟斗和前身裝載的鏟斗.裝載體積的評定 |
(EARTH-MOVING MACHINERY. LOADER AND FRONT LOADING EXCAVATOR BUCKETS. VOLUMETRIC RATINGS.) |
| NF E58-079-1984 |
土方機械.測定轅桿牽引力的試驗方法 |
(EARTH-MOVING MACHINERY. METHOD OF TEST FOR THE MEASUREMENT OF DRAWBAR PULL.) |
| NF E58-080-1-2002 |
土方機械.裝載機和挖掘裝載機.第1部分:驗證計算傾翻載荷用的標定工作量計算方法和試驗方法 |
(Earth-moving machinery - Loaders and backhoe loaders - Part 1 : calculation of rated operating capacity and test method for verifying calculated tipping load.) |
| NF E58-080-2-2002 |
土方機械.裝載機和挖掘裝載機.第2部分:測量最大提升高度的轉動力和提升能力的試驗方法 |
(Earth-moving machinery - Loaders and backhoe loaders - Part 2 : test method for measuring breakout forces and lift capacity to maximum lift height.) |
| NF E58-081-1999 |
土方機械.電磁兼容性 |
(Earth-moving machinery. Electromagnetic compatibility.) |
| NF E58-082-1998 |
土方機械.輪機翻挖尺寸的測定 |
(Earth-moving machinery. Determination of turning dimensions of wheeled machines.) |
| NF E58-090-1998 |
土方機械.拖拉機式推土機、平地機、鏟運機刃口.主要形狀和基本尺寸 |
(Earth-moving machinery. Cutting edges used on tractor-dozers, graders and scrapers. Principal shapes and basic dimensions.) |
| NF E58-100-1996 |
土方機械.安全.第5部分:液壓開鑿機要求(歐洲標準EN 474-5) |
(Earth-moving machinery. Safety. Part 5 : requirements for hydraulic excavators.) |
| NF E58-102-1996 |
土方機械.安全性.第4部分:挖掘裝載機的要求 |
(Earth-moving machinery. Safety. Part 4 : requirements for backhoe loaders.) |
| NF E58-104-1996 |
土方機械.安全性.第3部分:裝料機的要求 |
(Earth-moving machinery. Safety. Part 3 : requirements for loaders.) |
| NF E58-105-1995 |
移動式筑路機械.安全.第2部分:路面碾磨機的特殊要求 |
(Mobile road construction machinery. Safety. Part 2 : specific requirements for road-milling machines.) |
| NF E58-106-1995 |
移動式筑路機械.安全.第3部分:土壤穩定機械的特殊要求 |
(Mobile road construction machinery. Safety. Part 3 : specific requirements for soil stabilization machines.) |
| NF E58-107-1995 |
移動式筑路機械.安全.第4部分:壓縮機械的特殊要求 |
(Mobile road construction machinery. Safety. Part 4 : specific requirements for compaction machines.) |
| NF E58-110-1999 |
道路建筑車輛.瀝青混合成套設備.安全要求.(EN 536) |
(ROAD CONSTRUCTION MACHINES. ASPHALT MIXING PLANTS. SAFETY REQUIREMENTS. (EUROPEAN STANDARD EN 536).) |
| NF E58-111-1998 |
土方機械.燈光.信號和標志燈和反光裝置 |
(EARTH-MOVING MACHINERY. LIGHTING, SIGNALLING AND MARKING LIGHTS, AND REFLEX-REFLECTOR DEVICES.) |
| NF E58-112-1996 |
土方機械.操作者控制裝置 |
(Earth-moving machinery. Operator`S controls.) |
| NF E58-113-1993 |
土方機械.操作員的視野.第1部分:試驗方法 |
(EARTH-MOVING MACHINERY. OPERATOR`S FIELD OF VIEW. PART 1 : TEST METHOD.) |
| NF E58-113-2-1995 |
土方機械.操作員的視野.第2部分:評定方法 |
(EARTH-MOVING MACHINERY. OPERATOR`S FIELD OF VIEW. PART 2 : EVALUATION METHOD.) |
| NF E58-113-3-1995 |
土方機械.操作員的視野.第3部分:判據 |
(EARTH-MOVING MACHINERY. OPERATOR`S FIELD OF VIEW. PART 3 : CRITERIA.) |
| NF E58-114-1997 |
土方機械.橡膠輪胎機械.轉向要求 |
(Earth-moving machinery. Rubber-tyred machines. Steering requirements.) |
| NF E58-116-1993 |
土方機械.鑰匙鎖閉起動裝置 |
(EARTH-MOVING MACHINERY. KEY-LOCKED STARTING SYSTEMS.) |
| NF E58-117-1995 |
土方機械.活節框架鎖.性能要求 |
(EARTH-MOVING MACHINERY. ARTICULATED FRAME LOCK. PERFORMANCE REQUIREMENTS.) |
| NF E58-119-1996 |
土方機械.安全性.第2部分:平整機的要求 |
(EARTH-MOVING MACHINERY. SAFETY. PART 2 : REQUIREMENTS FOR TRACTOR-DOZERS. (EUROPEAN STANDARD EN 474-2).) |
| NF E58-120-1996 |
土方機械.安全.第6部分:自動傾卸車的要求 |
(EARTH-MOVING MACHINERY. SAFETY. PART 6 : REQUIREMENTS FOR DUMPERS. (EUROPEAN STANDARD EN 474-6).) |
| NF E58-122-1995 |
土方機械.裝有側起重臂的鋪管機.輪式拖拉機和裝卸機的提升能力 |
(EARTH-MOVING MACHINERY. LIFT CAPACITY OF PIPELAYERS AND WHEELED TRACTORS OR LOADERS EQUIPPED WITH SIDE BOOM.) |
| NF E58-123-1998 |
土方機械.安全性.第7部分:鏟運機的要求 |
(EARTH-MOVING MACHINERY. SAFETY. PART 7 : REQUIREMENTS FOR SCRAPERS. (EUROPEAN STANDARD EN 474-7).) |
| NF E58-124-1998 |
土方機械.安全性.第8部分:推土機的要求 |
(EARTH-MOVING MACHINERY. SAFETY. PART : REQUIREMENTS FOR GRADERS. (EUROPEAN STADARD EN 474-8).) |
| NF E58-125-1998 |
土方機械.安全性.第9部分:管道鋪設機的要求 |
(EARTH-MOVING MACHINERY. SAFETY. PART 9 : REQUIREMENTS FOR PIPELAYERS. (EUROPEAN STANDARD EN 474-9).) |
| NF E58-126-1998 |
土方機械.安全性.第10部分:挖溝機的要求 |
(EARTH-MOVING MACHINERY. SAFETY. PART 10 : REQUIREMENTS FOR TRENCHERS. (EUROPEAN STANDARD EN 474-10).) |
| NF E58-127-1998 |
土方機械.安全性.第10部分:土方壓實機的要求 |
(EARTH-MOVING MACHINERY. SAFETY. PART 11 : REQUIREMENTS FOR EARTH AND LANDFILL COMPACTORS. (EUROPEAN STANDARD EN 474-11).) |
| NF E58-130-1995 |
土方機械.機械.安裝在機器上的前后可聽到的報警信號.聲音試驗方法 |
(EARTH-MOVING MACHINERY. MACHINERY. MACHINE-MOUNTED FORWARD AND REVERSE AUDIBLE WARINING ALARM. SOUND TEST METHOD.) |
| NF E58-140-1995 |
土方機械.機器內流體裝置工作傾斜度極限的測定.靜態試驗 |
(EARTH-MOVING MACHINERY. DETERMINATION OF SLOPE LIMITS FOR MACHINE FLUID SYSTEMS OPERATION. STATIC TEST METHOD.) |
| NF E58-150-2002 |
地面移動機械.產品識別編碼系統 |
(Earth-moving machinery - Product identification numbering system.) |
| NF E58-151-1997 |
土方機械.液壓挖掘機和反鏟裝載機懸臂降低控制裝置.要求和試驗 |
(EARTH-MOVING MACHINERY. HYDRAULIC EXCAVATOR AND BACKHOE LOADER BOOM LOWERING CONTROL DEVICE. REQUIREMENTS AND TESTS.) |
| NF E58-152-1995 |
土方機械.吊臂承重裝置 |
(EARTH-MOVING MACHINERY. LIFT-ARM SUPPORT DEVICES.) |
| NF E58-153-1995 |
土方機械.液壓挖掘機.提升能力 |
(EARTH-MOVING MACHINERY. HYDRAULIC EXCAVATORS. LIFT CAPACITY.) |
| NF E58-155-1995 |
土方機械.翻斗車身支架和操作艙翻轉支架裝置 |
(EARTH-MOVING MACHINERY. DUMPER BODY SUPPORT AND OPERATOR`S CAB TILT SUPPORT DEVICES.) |
| NF E58-165-2000 |
機械結構.內部供電動力的機器的電磁兼容性 |
(Construction machinery - Electromagnetic compatibility of machines with internal electrical power supply.) |
| NF E58-170-2001 |
道路表面清潔機.安全要求 |
(Machines for road surface cleaning - Safety requirements.) |
| NF E58-172-2003 |
冬季服務機械.安全要求 |
(Winter service machines - Safety requirements.) |
| NF E58-173-2003 |
公路維護設備.安全要求 |
(Highway maintenance machines - Safety requirements.) |
| NF E58-200-1996 |
打樁設備.安全要求 |
(PILING EQUIPMENT. SAFETY REQUIREMENTS. (EUROPEAN STANDARD EN 996).) |
| NF E58-200/A1-1999 |
修改件1 |
() |
| NF E58-200/A2-2003 |
打樁設備.安全要求 |
(Piling equipment - Safety requirements.) |
| NF E58-2001-1999 |
1996年NF E 58-200的補充件1 |
() |
| NF E58-250-1996 |
鉆機.安全 |
(Drill rigs. Safety.) |
| NF E58-302-2003 |
隧道機械.巷道掘進機、聯合采礦機和沖擊式挑頂機.安全要求 |
(Tunnelling machines - Road headers, continuous miners and impact rippers - Safety requirements.) |
| NF E58-303-1996 |
巖石用無護平巷掘進機和無桿軸掘進機的安全 |
(Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock.) |
| NF E58-304-2003 |
隧道機械.氣閘.安全要求 |
(Tunnelling machines - Air locks - Safety requirements.) |
| NF E58-610-2000 |
由混凝土和鈣硅而來的構架產品生產的機器.安全.第1部分:共同要求 |
(Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1 : common requirements.) |
| NF E58-620-2003 |
混凝土和硅酸鈣類建筑產品用生產機器.安全.第2部分:制塊機 |
(Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 2 : block making machines.) |
| NF E58-630-2003 |
混凝土和硅酸鈣類建筑產品用生產機器.安全.第3部分:滑動和轉盤機 |
(Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 3 : slide and turntable machines.) |
| NF E58-640-2001 |
生產混凝土和硅酸鹽建筑產品用機器.安全.第4部分:屋面磚制造設備 |
(Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 4 : rooftile making machines.) |
| NF E58-680-2003 |
混凝土和硅酸鈣類建筑產品用生產機器.安全.第8部分:硅酸鹽(和混凝土)建筑產品用生產機器和設備 |
(Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 8 : machines and equipment for the manufacture of constructional products from calcium-silica) |
| NF E58-910-3-2003 |
平板玻璃制造、處理和加工用機械和設備.安全要求.第3部分:切割機 |
(Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3 : cutting machines.) |
| NF E58-910-4-2003 |
平板玻璃制造、處理和加工用機械和設備.安全要求.第4部分:傾斜臺 |
(Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4 : tilting tables.) |
| NF E60-000-1975 |
機床型號的多種語言詞匯 |
(MULTILINGUAL VOCABULARY OF MACHINE TOOL TYPES.) |
| NF E60-001-1982 |
磨床.外旋轉表面.綜合0.多種語言名細表.應用 |
(External cylindrical grinding machines. General. Terminology. Utilisation.) |
| NF E60-002-1982 |
磨床.水平軸線砂輪軸平面.綜述.多種語言名稱.應用 |
(Surface grinding machines with horizontal grinding wheel spindle. General. Terminology. Utilisation.) |
| NF E60-003-1982 |
磨床.無中心外旋轉表面.綜述.多種語言名名稱.應用 |
(Cylindrical external centreless grinding machines. General. Terminology. Utilisation.) |
| NF E60-009-1976 |
機床的定義 |
(DEFINITION OF A MACHINE TOOL.) |
| NF E60-010-1970 |
機床的分類.綜合 |
(CLASSIFICATION OF MACHINE TOOLS.GENERAL) |
| NF E60-011-1970 |
機床的分類.金屬切削機床 |
(CLASSIFICATION OF MACHINE TOOLS.MACHINE TOOLS,CHIP REMOVING.) |
| NF E60-012-1970 |
機床的分類.成形機剪床 |
(CLASSIFICATION OF MACHINE TOOLS.FORMING MACHINES,SHEARING MACHINES.) |
| NF E60-013-1984 |
機床的分類.木工機床 |
(Classification of machine-tools. Woodworking machines.) |
| NF E60-021-1997 |
機床切削工具.速度和走刀量 |
(Machine-tools. speeds and feeds.) |
| NF E60-022-1971 |
車床絲杠的螺矩(數控車床除外) |
(PITCHES OF SCREW LEAD OF LATHES (OTHER THAT NUMERICAL CONTROLLED LATHES).) |
| NF E60-023-1996 |
人工換刀7:24錐度工具錐柄 |
(7/24 tapers for tool skanks for manual changing.) |
| NF E60-025-1978 |
機床主軸前部.錐度5%和7/24的莫氏錐公差 |
(MACHINE TOOL SPINDLE NOSES. TAPER TOLERANCES FOR MORSE TAPER,5 PERCENT TAPERS AND 7/24 TAPERS.) |
| NF E60-028-1972 |
機床部件移動指示標尺 |
(SCALES FOR INDICATION OF DISPLACEMENT OF MACHINE TOOL COMPONENTS) |
| NF E60-031-1966 |
機床控制機構的操作方向 |
(Direction of operation of machine tool controls.) |
| NF E60-032-1966 |
機床上示出的標志符號 |
(Symbols for indications appearing on machine tools.) |
| NF E60-051-1983 |
機床技術說明書.中心孔.型號A.B和R.尺寸 |
(Centre holes. Types A,B and R. Dimensions.) |
| NF E60-096-1998 |
機械工具試驗規程.第4部分:數字型控制機械工具循環試驗 |
(TEST CODE FOR MACHINE-TOOLS. PART 4 : CIRCULAR TESTS FOR NUMERICALLY CONTROLLED MACHINE TOOLS.) |
| NF E60-097-1998 |
實驗規則和機械工具.第2部分:數控軸位置的精度和重復性的測定 |
(Test code for machine tools. Part 2 : determination of accuracy and repeatability of positioning of numerically controlled axes.) |
| NF E60-100-1998 |
機床的試驗規程.非負載或精加工條件下機械加工的幾何精度 |
(Test code for machine tools. Part 1 : geometric accuracy of machines operating under no-load or finishing conditions.) |
| NF E60-101-1997 |
通用平行車床的合格條件.精度測試 |
(Acceptance conditions for general purpose parallel lathes. Testing of the accuracy.) |
| NF E60-102-1976 |
數控臥式車床的試驗條件.精確度檢驗 |
(TEST CONDITIONS FOR NUMERICAL CONTROL PARALLEL LATHES. TESTING OF THE ACCURACY.) |
| NF E60-103-1998 |
機床.臥式軸六角自動車床和臥式單軸自動車床的試驗條件.精度試驗 |
(Machine tools. Test conditions for horizontal spindle turret and single spindle automatic lathes. Testing of the accuracy.) |
| NF E60-105-1984 |
單柱或雙柱立式車床.驗收條件和名稱.第1部分:概述 |
(Acceptance conditions for vertical turning and boring lathes with one or two columns. Part 1 : general introduction.) |
| NF E60-106-1984 |
單柱或雙柱立式車床.驗收條件和名稱.第2部分：固定或可移動卡盤車床.精確度檢驗 |
(Acceptance conditions and nomenclature for vertical turning and boring lathes with one or two columns. Part 2 : lathes with a single fixed or movable table. Testing of accuracy.) |
| NF E60-107-1985 |
機床.仿形車床和仿形輔助裝置.驗收條件.精確度檢驗 |
(Machine-tools. Copying lathes and copying attachments. Acceptance conditions. Testing of accuracy.) |
| NF E60-111-0-1999 |
升降工作臺的銑床的試驗條件.第0部分:概述 |
(Test conditions for milling machines with table of variable height. Testing of accuracy. Part 0 : general introduction.) |
| NF E60-111-2-1998 |
帶升降工作臺的銑床的試驗條件.精度試驗.第2部分:臥式機床 |
(Test conditions for milling machines with table of variable height. Testing of the accuracy. Part 2 : machines with horizontal spindle.) |
| NF E60-111-3-1998 |
可變高度平臺機器的試驗條件.精度實驗.第3部分:帶垂直鏜桿的機器 |
(Test condition for milling machines with table of variable height. Testing of accuracy. Part 3 : machines with vertical spindle.) |
| NF E60-112-1-2001 |
工作臺高度固定的手控銑床的試驗條件.精度試驗.第1部分:帶有水平主軸的機器 |
(Test conditions for manually controlled milling machines with table of fixed height - Testing of the accuracy -- Part 1 : machines with horizontal spindle.) |
| NF E60-112-2-2001 |
工作臺高度固定的手控銑床的試驗條件.精度試驗.第2部分:帶有垂直主軸的機器 |
(Test conditions for manually controlled milling machines with table of fixed height -Testing of the accuracy - Part 2 : machines with vertical spindle.) |
| NF E60-114-1985 |
鏜床和銑床的可移動盤.驗收條件.精確度檢驗 |
(Machine tools. Removable tables of boring and milling machines. Acceptance conditions. Testing of accuracy.) |
| NF E60-116-1999 |
臥式鏜銑床的試驗條件.準確度試驗.第2部分:臺式機床 |
(Test conditions for boring and milling machines with horizontal spindle. Testing of the accuracy. Part 2 : table-type machines.) |
| NF E60-118-1998 |
帶橫主軸的鏜床和銑床的驗收條件.第3部分:精確度試驗.具有固定工作臺的水平機器 |
(Test conditions for boring and milling machines with horizontal spindle. Testing of the accuracy. Part 3 : floor type machines with detached, stationary work-holding table.) |
| NF E60-119-1998 |
臥式鏜銑床的驗收條件.精度試驗.第4部分:可移動床身的多刀刨床 |
(Test conditions for boring and milling machines with horizontal spindle. Testing of the accuracy. Part 4 : planer type machines with movable column.) |
| NF E60-120-1981 |
機床工件夾具的驗收條件和安裝條件 |
(Test conditions and installation conditions for work-holding fixed tables of machine tools.) |
| NF E60-121-2002 |
有水平磨砂輪軸和往復式工作臺的平面磨床的試驗條件.精度試驗.第1部分:工作臺長度最長達1600mm的機床 |
(Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table - Testing of accuracy - Part 1 : machines with a table length up to 1 600 mm.) |
| NF E60-123-1984 |
橫軸內旋轉圓磨床.驗收條件.精確度檢驗 |
(ACCEPTANCE CONDITIONS FOR INTERNAL CYLINDRICAL GRINDING MACHINES WITH HORIZONTAL SPINDLE. TESTING OF ACCURACY.) |
| NF E60-124-1984 |
帶移動臺外旋轉圓磨床.驗收條件.精確度檢驗 |
(TEST CONDITIONS FOR EXTERNAL CYLINDRICAL GRINDING MACHINES WITH A MOVABLE TABLE. TESTING OF ACCURACY.) |
| NF E60-126-2001 |
雙柱式平面磨床的試驗條件.導軌磨床.精度試驗 |
(Test conditions for surface grinding machines with two columns - Machines for grinding slideways - Testing of the accuracy.) |
| NF E60-127-1989 |
立式磨床.驗收條件.精確度檢驗 |
(Machine tools. Vertical grinding machines. Acceptance conditions. Testing of accuracy.) |
| NF E60-132-1-1997 |
立柱型垂直鉆床的試驗條件.精度測試.第1部分:幾何試驗 |
(Test conditions for pillar type vertical drilling machines. Testing of the accuracy. Part 1 : geometrical tests.) |
| NF E60-132-2-1997 |
立柱型垂直鉆床的試驗條件.精度測試.第2部分:實用試驗 |
(Test conditions for pillar type vertical drilling machines. Testing of the accuracy. Part 2 : practical test.) |
| NF E60-133-1-1996 |
箱型立式鉆床的試驗條件.精度試驗.第1部分:幾何試驗 |
(Test conditions for box type vertical drilling machines. Testing of the accuracy. Part 1 : geometrical tests.) |
| NF E60-133-2-1996 |
箱型立式鉆床的試驗條件.精度試驗.第2部分:實用試驗 |
(Test conditions for box type vertical drilling machines. Testing of the accuracy. Part 2 : pratical test.) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com