標準號 |
中文名稱 |
英文名稱 |
| NF E60-134-1-2000 |
機械工具.沖模放電機器的試驗條件.術語和精度試驗.第1部分:單柱機 |
(Machines tools - Test conditions for die sinking electro-discharge machines (EDM) - Terminology and testing of accuracy - Part 1 : single column machines (cross slide table type and fixed table type).) |
| NF E60-134-2-2000 |
機械工具.沖模放電機器的試驗條件.術語和精度試驗.第2部分:雙柱機 |
(Machines tools - Test conditions for die sinking electro-discharge machines (EDM) -Terminology and testing of the accuracy - Part 2 : two column machines (slide-head type and cross-slide table type).) |
| NF E60-135-1996 |
立式單軸轉塔坐標鉆床的試驗條件.精度試驗 |
(Test conditions for turret and single spindle co-ordinate drilling machines with vertical spindle. Testing of the accuracy.) |
| NF E60-136-1-2000 |
帶垂直心軸和固定高度臺面的高精度轉動架和與心軸相配的鉆孔機的試驗條件.精度試驗.第1部分:單柱機型 |
(Test conditions for high accuracy turret and single spindle coordinate drilling and boring machines with table of fixed height with vertical spindle - Testing of the accuracy - Part 1 : single column) |
| NF E60-136-2-2000 |
帶垂直心軸和固定高度臺面的高精度轉動架和與心軸相配的鉆孔機的試驗條件.精度試驗.第2部分:帶移動臺面的便 |
(Test conditions for high accuracy turret and single spindle coordinate drilling and boring machines with table of fixed height with vertical spindle - Testing of the accuracy - Part 2 : portal type ma) |
| NF E60-137-1996 |
機床機械分度頭的驗收條件.精度檢驗 |
(Acceptance conditions of mechanical dividing heads for machine tools. Testing of accuracy.) |
| NF E60-138-1993 |
滾齒機的驗收條件.精度的檢驗 |
(Acceptance conditions for gear hobbing machines. Testing of the accuracy.) |
| NF E60-140-2000 |
機床.金屬線放電加工機床的試驗條件.術語和準確度試驗 |
(Machine tools - Test conditions for wire electrical discharge machines (wire EDM) - Terminology and testing of the accuracy.) |
| NF E60-141-1983 |
機床.臥式內面拉床驗收條件和名稱.精確度檢驗 |
(Acceptance conditions and nomenclature for horizontal internal broaching machines. Testing of accuracy.) |
| NF E60-142-1985 |
立式內面拉床.驗收條件和名稱.精確度檢驗 |
(Machine tools. Broaching machines of vertical internal type. Acceptance conditions and nomenclature. Testing of accuracy.) |
| NF E60-143-1985 |
立式外面拉床.驗收條件和名稱.精確度檢驗 |
(Machine tools. Vertical surface broaching machines. Acceptance conditions and nomenclature. Testing of accuracy.) |
| NF E60-144-2001 |
機床試驗規程.第3部分:熱效應的測定 |
(Test code for machine tools - Part 3 : determination of thermal effects.) |
| NF E60-145-2003 |
機床檢驗通則.第6部分:體和面對角線的定位準確度的測定(數字位移試驗) |
(Test code for machines tools - Part 6 : determination of positioning accuracy on body and face diagonals (Digital displacement tests).) |
| NF E60-150-1965 |
機車.車間計量學原理 |
(MACHINE TOOLS. PRINCIPLES OF WORKSHOP METROLOGY.) |
| NF E60-163-2000 |
機床.橋型銑床的試驗條件.精度試驗.第1部分:固定橋(門架形)機床 |
(Machine tools - Test conditions for bridge-type milling machines - Testing of the accuracy - Part 1 : fixed bridge (portal-type) machines.) |
| NF E60-164-1988 |
通用移動式龍門銑床.驗收條件和精確度檢驗 |
(Machine-tools. Plano-milling machines, portal type. Acceptance conditions and testing of accuracy.) |
| NF E60-165-1989 |
航空型移動式龍門銑床.驗收條件.精確度檢驗 |
(Machine-tools. Portal type plano-milling machines for aeronautical use. Acceptance conditions. Testing of accuracy.) |
| NF E60-172-2-2001 |
組合加工中心機床的試驗條件.第2部分:帶垂直主軸或帶垂直旋轉主軸通用頭的機器的幾何試驗(垂直的Z軸) |
(Test conditions for machining centres - Part 2 : geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis (vertical Z-axis).) |
| NF E60-172-4-1998 |
組合加工中心機床的試驗條件.第4部分:線性和旋轉軸定位的精度和可重復性 |
(Test conditions for machining centres. Part 4 : accuracy and repetability of positioning of linear and rotary axes.) |
| NF E60-172-5-1998 |
組合加工中心機床的試驗條件.第5部分:工件夾緊盤定位的精度和可重復性 |
(Test conditions of machining centres. Part 5 : accuracy and repeatability of positioning of work-holding pallets.) |
| NF E60-172-6-1998 |
組合加工中心機床的試驗條件.第6部分:走刀量、速度和插入動作的準確度 |
(Test conditions for machining centres. Part 6 : accuracy of feeds, speeds and interpolations.) |
| NF E60-172-7-1998 |
組合加工中心機床的驗收條件.第7部分:成品試驗件的精度 |
(Test conditions for machining centres. Part 7 : accuracy of a finished test piece.) |
| NF E60-172-8-2001 |
組合加工中心機床的試驗條件.第8部分:評價三維坐標平面上輪廓性能 |
(Test conditions for machining centres - Part 8 : evaluation of the contouring performance in the three coordinate planes.) |
| NF E60-172-9-2001 |
組合加工中心機床的試驗條件.第9部分:工具和墊板轉換的操作時間的評價 |
(Test conditions for machining centres - Part 9 : evaluation of the operating times of tool change and pallet change.) |
| NF E60-181-2001 |
生產系統.驗收條件.單件生產穩定性評價方法 |
(Manufacturing systems - Acceptance conditions - Piece manufacture suitability evaluation method.) |
| NF E60-182-2002 |
制造系統.性能讀數.高架設備效率.球體設備效率.經濟設備效率 |
(Manufacturing systems - Performance indications - Overall equipment effectiveness (TRS) - Global equipment effectiveness (TRG) - Economic equipment effectiveness (TRE).) |
| NF E60-202-1996 |
機床.潤滑系統 |
(Machine-tools. Lubrification systems.) |
| NF E60-270-1991 |
金屬切屑機床.測量噪聲用的工作條件.一般條件 |
(Chip removing machine-tools. Conditions of working for measurement of noise. General conditions.) |
| NF E60-272-1991 |
機床.測量噪音的常規工作條件.銑床 |
(Machine tools. Conventional working conditions for measurement of noise. Milling machines.) |
| NF E60-273-1991 |
機床.測量噪音的常規工作條件.車床 |
(Machine tools. Conventional working conditions for measurement of noise. Turning machines.) |
| NF E60-276-1990 |
機床.噪音測量的常規工作條件.帶鋸刀的研磨機切斷機床 |
(Machine-tools. Conventional working conditions for measurement of noise. Grinder-cutting-off machines with cuttersaws.) |
| NF E60-400-2002 |
機床.安全性.固定式磨床 |
(Machine-tools - Safety - Stationary grinding machines.) |
| NF E60-406-2001 |
機床的安全.鉆床 |
(Safety of machine tools - Drilling machines.) |
| NF E60-407-1987 |
金屬切削機床.手工進刀鋸床.機械危險的防護 |
(METAL CUTTING MACHINES. CUTTING-OFF MACHINES WITH MILLING SAW WITH MANUAL ADVANCE. PREVENTION OF MECHANICAL HAZARDS.) |
| NF E60-415-1989 |
機床.車床和頂心.保護裝置強度的試驗 |
(MACHINES TOOLS. LATHES AND TURNING CENTRES. STRENGTH TESTS FOR GUARDS.) |
| NF E60-416-2001 |
機床的安全.小型數控轉向機和轉向中心 |
(Safety of machine tools - Small numerically controlled turning machines and turning centres.) |
| NF E60-416/A1-2003 |
機床的安全.小型數字控制的轉向車床和轉向中心 |
(Safety of machine tools - Small numerically controlled turning machines and turning centres.) |
| NF E60-417-2001 |
機床的安全.大型數字控制的轉向車床和轉向中心 |
(Safety of machine tools - Large numerically controlled turning machines and turning centres.) |
| NF E60-418-2001 |
機床的安全.帶和不帶自動控制的手控車床 |
(Safety of machine-tools - Manually controlled turning machines with or without automatic control.) |
| NF E60-420-2001 |
機床.安全.組合加工中心機床 |
(Machine tools - Safety - Machining centres.) |
| NF E60-421-2001 |
機床的安全.銑床(包括鏜孔機) |
(Safety of machine-tools - Milling machines (including boring machines).) |
| NF E60-425-2002 |
機床.安全性.多軸自動車床 |
(Machine tools - Safety - Multi-spindle automatic turning machines.) |
| NF E60-450-2001 |
機床.安全.放電機床 |
(Machine tools - Safety - Electro Discharge Machines.) |
| NF E60-601-1997 |
機械裝置的安全.激光加工機械.安全要求 |
(Safety of machinery. Laser processing machines. Safety requirements.) |
| NF E61-051-1991 |
J9501操縱器.總遙控操縱器.機械控制伺服裝置 |
(Telemanipulators. Master-slave mechanically controlled telemanipulators.) |
| NF E61-100-1996 |
操作工業機器人的詞匯 |
(Manipulating industrial robots. Vocabulary.) |
| NF E61-103-1998 |
操縱工業機器人.性能指標和有關試驗方法 |
(Manipulating industrial robots. Performance criteria and related test methods.) |
| NF E61-105-2002 |
操作工業機器人.帶抓爪的物料搬運.詞匯和特征表示 |
(Manipulating industrial robots - Object handling with grasp-type grippers - Vocabulary and presentation of characteristics.) |
| NF E61-131-1997 |
操作工業機器人.機械界面.第1部分:板(A式)(歐洲標準EN ISO 9409-1) |
(Manipulating industrial robots. Mechanical interfaces. Part 1 : plates (form A).) |
| NF E61-132-2003 |
操作型工業機器人.機械接口.第2部分:軸 |
(Manipulating industrial robots - Mechanical interfaces - Part 2 : shafts.) |
| NF E61-135-1998 |
控制型工業機器人.自動和效果交換器.詞匯和特性說明 |
(MANIPULATING INDUSTRIAL ROBOTS. AUTOMATIC END EFFECTOR EXCHANGE SYSTEMS. VOCABULARY AND PRESENTATION OF CHARACTERISTICS. (EUROPEAN STANDARD EN ISO 11593).) |
| NF E61-187-2003 |
操縱工業機器人.機器人程序設計和操縱的圖形使用者接口 |
(Manipulating industrial robots - Graphical user interfaces for programming and operation of robots (GUI-R).) |
| NF E62-102-1992 |
機床.自動定心雙瓜夾頭.互控尺寸和驗收規范 |
(Self-centring chucks for machine tools with two piece jaws (tongue and groove type). Sizes for interchangeability and acceptance test specifications.) |
| NF E62-103-1991 |
機床.夾頭卡爪的花鍵.檢驗尺寸.安裝 |
(Machine tools. Serrations for jaw chucks. Test dimensions. Assembly.) |
| NF E62-105-1997 |
機床.車床頂尖.互換尺寸 |
(Machine tools. Lathe centres. Sizes for interchangeability.) |
| NF E62-109-2002 |
機床.主軸頭和干燥機架卡盤的連接尺寸.第1部分:圓錐形連接 |
(Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 1 : conical connection.) |
| NF E62-110-1997 |
車床切削工具.軸頭和面板.可互換性尺寸.第2部分:凸輪鎖型 |
(Machine-tools. Spindle noses and face plates . Sizes for interchangeability. Part 2 : camlock type.) |
| NF E62-111-1976 |
車床主軸頭部和卡盤.卡口型 |
(LATHE SPINDLE NOSES AND BACK PLATES. TYPE BAYONET.) |
| NF E62-116-1986 |
磨床.砂輪安裝用法蘭盤.設計規則.試驗 |
(GRINDING MACHINES. FLANGES FOR THE MOUNTING OF GRINDING WHEELS. DESIGN RULES. TESTING METHOD.) |
| NF E62-151-1982 |
機床.往復式金屬鋸床.尺寸.能力 |
(MACHINE TOOLS. HACK-SAWING MACHINES. DIMENSIONS. RATINGS.) |
| NF E62-152-1983 |
機床.立式金屬帶鋸床.尺寸.能力 |
(MACHINE TOOLS. VERTICAL BAND SAWS. DIMENSIONS. CAPACITIES.) |
| NF E62-153-1983 |
機床.臥式金屬帶鋸床.尺寸.能力 |
(MACHINE TOOLS. HORIZONTAL BAND SAWS. DIMENSIONS. CAPACITIES .) |
| NF E62-154-1985 |
機床.往復式金屬鋸床.驗收條件.精確度檢驗 |
(MACHINE TOOLS. HACK SAWING MACHINES. ACCEPTANCE CONDITIONS. TESTING OF ACCURACY.) |
| NF E62-155-1985 |
機床.立式金屬帶鋸床.驗收條件.精確度檢驗 |
(MACHINE TOOLS. VERTICAL BAND SAWS. ACCEPTANCE CONDITIONS. TESTING OF ACCURACY.) |
| NF E62-156-1985 |
機床.臥式金屬帶鋸床.驗收條件，精確度檢驗 |
(MACHINES TOOLS. HORIZONTAL BAND SAWS. ACCEPTANCE CONDITIONS. TESTING OF ACCURACY.) |
| NF E62-181-1983 |
機床.立式內拉床.名稱，尺寸，特征 |
(MACHINE TOOLS. VERTICAL INTERNAL BROACHING MACHINES. DESIGNATION. DIMENSIONS. CHARACTERISTICS.) |
| NF E62-182-1983 |
機床.臥式內拉床.名稱，尺寸，特征 |
(MACHINE TOOLS. HORIZONTAL INTERNAL BROACHING MACHINES. DESIGNATION. DIMENSIONS. CHARACTERISTICS.) |
| NF E62-183-1983 |
拉削用的四個鎖銷的尾掛鉤頭.第1部分:綜合 |
(PULLERS WITH 4 CLAMPS FOR INTERNAL PULL-TYPE BROACHING. PART 1 : GENERAL.) |
| NF E62-184-1983 |
拉削用的四個鎖銷的前掛鉤頭.第2部分：直徑６到２５的主軸用掛鉤頭尺寸和特征 |
(PULLER WITH 4 CLAMPS FOR INTERNAL PULL-TYPE BROACHING. PART 2 : DIMENSIONS AND CHARACTERISTICS OF PULLERS FOR BORACHES OF DIAMETERS 6 TO 25.) |
| NF E62-185-1983 |
拉削用的四個鎖銷的尾掛鉤頭.第3部分:直徑２８到３２的主軸用掛鉤頭尺寸和特征 |
(PULLERS WITH 4 CLAMPS FOR INTERNAL PULL-TYPE BROACHING. PART 3 : DIMENSIONS AND CHARACTERISTICS OF PULLERS FOR BROACHES OF DIAMETERS 28 TO 32.) |
| NF E62-186-1983 |
拉削用的四個鎖銷的尾掛鉤頭.第4部分：直徑３６到４０的主軸用掛鉤頭尺寸和特征 |
(PULLER WITH 4 CLAMPS FOR INTERNAL PULL-TYPE BROACHING. PART 4 : DIMENSIONS AND CHARACTERISTICS OF PULLERS FOR BROACHES OF DIAMETERS 36 TO 40.) |
| NF E62-187-1983 |
拉削用的四個鎖銷的尾掛鉤頭.第5部分：直徑４５到５０的主軸用掛鉤頭尺寸和特征 |
(PULLER WITH 4 CLAMPS FOR INTERNAL PULL-TYPE BROACHING. PART 5 : DIMENSIONS AND CHARACTERISTICS OF PULLERS FOR BROACHES OF DIAMETERS 45 TO 50.) |
| NF E62-188-1983 |
拉削用的四個鎖銷的尾掛鉤頭.第6部分：直徑５６到６３的主軸用掛鉤頭尺寸和特征 |
(PULLER WITH 4 CLAMPS FOR INTERNAL PULL-TYPE BROACHING. PART 6 : DIMENSIONS AND CHARACTERISTICS OF PULLERS FOR BROACHES OF DIAMETERS 56 TO 63.) |
| NF E62-189-1983 |
拉削用的四個鎖銷的尾掛鉤頭.第7部分：直徑７０到８０的主軸用掛鉤頭尺寸和特征 |
(PULLER WITH 4 CLAMPS FOR INTERNAL PULL-TYPE BROACHING. PART 7 : DIMENSIONS AND CHARACTERISTICS OF PULLERS FOR BROACHES OF DIAMETERS 70 TO 80.) |
| NF E62-196-1989 |
機床.內孔后推式拉削刀具端頭.SW型.W形狀.第1部分:概論 |
(MACHINE-TOOLS. RETRIEVER FOR INTERNAL PUSH TYPE BROACHING WITH FULL ENDS,SHAPE W. PART 1 : GENERAL.) |
| NF E62-197-1989 |
機床.U或V形尾端的內推式拉削的UV 型頂推頭.第1部分:概論 |
(MACHINES-TOOLS. PUSHING HEAD TYPE UV FOR INTERNAL PUSH TYPE BROACHING WITH TAIL ENDS,SHAPE U OR V. PART 1 : GENERAL.) |
| NF E62-201-1996 |
機床結構的組合件.旋轉工作臺和旋轉工作臺的多邊中心支座 |
(Modular unit for machine tool construction. Rotary tables and multi-sided centre bases for rotary tables.) |
| NF E62-202-1996 |
機床結構的組合件.主軸箱 |
(Modular units for machine tool construction. Headstocks.) |
| NF E62-203-1996 |
組合機床通用部件.滑動組件 |
(Modular units for machine tool construction. Slide units.) |
| NF E62-204-1996 |
組合機床通用部件.多軸端部.箱體和輸入軸尺寸 |
(Modular units for machine tool construction. Multi-spindle heads. Casing and input drive shaft dimensions.) |
| NF E62-206-1996 |
機床結構的組合件.中心座和立柱 |
(Modular units for machine tool construction. Centre bases and columns.) |
| NF E62-207-1996 |
機床結構的組合件.滑動組件的翼板座 |
(Modular units for machine tool construction. Wing bases for slide units.) |
| NF E62-208-1997 |
機床切削工具結構用標準化構件.圓柱用翅基 |
(Modular units for machine-tools construction. Wing base for columns.) |
| NF E62-209-1997 |
機床切削工具結構用標準化構件.安裝多軸頭用榫舌驅動和法蘭 |
(Modular units for machines-tools construction. Tenon drive and flanges for mounting multi-spindle heads.) |
| NF E62-210-1976 |
機床構造標準部件.多軸頭.鉆床主軸.概論 |
(UNIT HEADS. MULTI SPINDLE HEADS. DRILLING SPINDLES. GENERAL.) |
| NF E62-211-1976 |
機床構造標準部件.多軸頭.光端單鉆床主軸 |
(UNIT HEADS. MULTI SPINDLE HEADS. SIMPLE PLAIN END DRILLING SPINDLES.) |
| NF E62-212-1976 |
機床構造標準部件.多軸頭.螺紋端單鉆床主軸 |
(UNIT HEADS. MULTI SPINDLE HEADS. SIMPLE THREADED END DRILLING SPINDLES.) |
| NF E62-213-1976 |
機床構造標準部件.多軸頭.光滑端面鉆床傳動軸 |
(UNIT HEADS. MULTI SPINDLE HEADS. DRIVEN PLAIN AND DRILLING SPINDLES.) |
| NF E62-214-1976 |
機床構造標準部件.多軸頭.螺紋端面鉆床傳動軸 |
(UNIT HEADS. MULTI SPINDLE HEADS. DRIVEN THREADED END DRILLING SPINDLES.) |
| NF E62-220-1976 |
機床構造標準部件.多軸頭.攻螺紋軸.通用系列.概論 |
(MODULAR UNITS FOR MACHINE TOOLS. MULTISPINDLE HEADS. TAPPING SPINDLES. NORMAL SERIES. GENERAL.) |
| NF E62-221-1976 |
機床構造標準部件.多軸頭.攻螺紋軸.通用系列 |
(MODULAR UNITS FOR MACHINE TOOLS. MULTISPINDLE HEADS. TAPPING SPINDLES. NORMAL SERIES.) |
| NF E62-225-1976 |
機床構造標準部件.多軸頭.攻螺紋復制機 |
(MODULAR UNITS FOR MACHINE TOOLS. MULTISPINDLE HEADS. TAPPING REPRODUCERS.) |
| NF E62-240-1976 |
機床構造標準部件.多軸頭.中間單軸 |
(UNIT HEADS. MULTI SPINDLE HEADS. SIMPLE CONTERSHAFTS.) |
| NF E62-241-1976 |
機床構造標準部件.多軸頭.中間傳動軸 |
(UNIT HEADS. MULTI SPINDLE HEADS. DRIVEN COUNTERSHAFTS.) |
| NF E62-245-1976 |
機床構造標準部件.多軸頭.中間單軸 |
(MODULAR UNITS FOR MACHINE TOOLS. MULTISPINDLE HEADS. SIMPLE COUNTERSHAFTS.) |
| NF E62-246-1976 |
機床構造標準部件.多軸頭.中間傳動軸 |
(MODULAR UNITS FOR MACHINE TOOLS. MULTISPINDLE HEADS. DRIVEN COUNTERSHAFTS.) |
| NF E62-250-1976 |
機床構造標準部件.多軸頭.簡單直齒輪 |
(UNIT HEADS. MULTI SPINDLE HEADS. SIMPLE STRAIGHT TOOTHED PINIONS.) |
| NF E62-251-1976 |
機床構造標準部件.多軸頭.偏心輪轂直齒輪 |
(UNIT HEADS. MULTI SPINDLE HEADS. OFFSET BOSS STRAIGHT TOOTHED PINIONS.) |
| NF E62-252-1976 |
機床構造標準部件.多軸頭.撐圈 |
(MODULAR UNITS FOR MACHINE TOOLS. MULTI SPINDLE HEADS. STAYS.) |
| NF E62-253-1976 |
機床構造標準部件.多軸頭.密封條框環 |
(UNIT HEADS. MULTI SPINDLE HEADS. JOINT HOUSING RING.) |
| NF E62-254-1976 |
機床構造標準部件.多軸頭.導向裝置通氣孔 |
(UNIT HEADS. MULTI SPINDLE HEADS. DEFLECTOR CHIMNEY.) |
| NF E62-255-1976 |
機床構造標準部件.多軸頭.１號和２號攻螺紋軸上的直齒主動齒輪 |
(MODULAR UNITS FOR MACHINE TOOLS. MULTISPINDLE HEADS. CONTROL STRAIGHT-TOOTHED PINIONS FOR TAPPING SPINDLES NO 1 AND 2.) |
| NF E62-256-1976 |
機床構造標準部件.多軸頭.３號和４號攻螺紋軸上的直齒主動齒輪 |
(MODULAR UNITS FOR MACHINE TOOLS. MULTISPINDLE HEADS. CONTROL STRAIGHT-TOOTHED PINIONS FOR TAPPING SPINDLES NO 3 AND 4.) |
| NF E62-257-1976 |
機床構造標準部件.多軸頭.簡單直齒輪 |
(MODULAR UNITS FOR MACHINE TOOLS. MULTISPINDLE HEADS. SIMPLE STRAIGHT-TOOTHED PINIONS.) |
| NF E62-258-1976 |
機床構造標準部件.多軸頭.偏心輪轂直齒輪 |
(MODULAR UNITS FOR MACHINE TOOLS. MULTISPINDLE HEADS. OFFSET BOSS STRAIGHT-TOOTHED PINIONS.) |
| NF E62-259-1976 |
機床構造標準部件.多軸頭.平臺 |
(MODULAR UNITS FOR MACHINE TOOLS. MULTISPINDLE HEADS. THRUST BEARINGS.) |
| NF E62-260-1971 |
機床構造標準部件.多軸頭.調整套.組件 |
(MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION.MULTI-SPINDLE HEADS.ADJUSTABLE ADAPTORS.ASSEMBLIES.) |
| NF E62-265-1976 |
機床構造標準部件.多軸頭.調整套的螺帽 |
(MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. MULTI-SPINDLE HEADS. NUTS FOR MULTI-SPINDLE HEADS.) |
| NF E62-275-1985 |
組合機床通用部件.整體導軌立柱 |
(Modular units for machine tool construction. Integral way columns.) |
| NF E62-276-1985 |
組合機床通用部件.整體導軌立柱.落地式 |
(Modular units for machine tool construction. Integral way columns. Floor-mounted type.) |
| NF E62-277-1996 |
機床結構的組合件.支承座 |
(Modular units for machine tool construction. Support brackets.) |
| NF E62-278-1976 |
機床構造標準部件.“錐面”移動距離的夾具柄 |
(MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. TOOL-HOLDER SHANKS WITH “CONE AND FACE“ BEARING SURFACES.) |
| NF E62-279-1976 |
機床構造標準部件.錐面移動距離的主軸前部 |
(MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. SPINDLE NOSES WITH “CONE AND FACE“.BEARING SURFACES.) |
| NF E62-300-1977 |
機床構造標準部件.多軸頭.鉆孔，鏜孔，攻螺紋防護裝置.概論 |
(MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. MULTI-SPINDLE HEADS. DRILLING,BORING AND TAPPING TEMPLATES. GENERAL.) |
| NF E62-301-1977 |
機床構造標準部件.多軸頭.２８和３６臥式防護裝置.支架：導板蓋和彈簧 |
(MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. MULTI-SPINDLE HEADS. HORIZONTAL TEMPLATES 28 AND 36. SUPPORTS : COVER,GUIDE AND SPRING.) |
| NF E62-303-1977 |
機床構造標準部件.多軸頭.防護裝置.支架.可退鎖銷 |
(MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. MULTI-SPINDLE HEADS. TEMPLATES. SUPPORTS : RETRACTING LOCK.) |
| NF E62-304-1977 |
機床構造標準部件.多軸頭.半軸瓦 |
(MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. MULTI-SPINDLE HEADS. HALF-RING.) |
| NF E62-305-1977 |
機床構造標準部件，多軸頭.防護裝置.半邊墊圈 |
(MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. MULTI-SPINDLE HEADS. TEMPLATES : HALF-WASHER.) |
| NF E62-306-1977 |
機床構造標準部件.多軸頭.模具.支撐銷 |
(MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. MULTI-SPINDLE HEADS. TEMPLATES. KEY.) |
| NF E62-307-1977 |
機床構造標準部件.多軸頭.防護裝置.２８和３６臥式防護裝置.支架.行程止推螺釘 |
(MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. MULTI-SPINDLE HEADS. HORIZONTAL TEMPLATES 28 AND 36. SUPPORTS : STOP SCREW.) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com