標準號 |
中文名稱 |
英文名稱 |
| NF C93-7661-1996 |
NF C93-766-94補充件1 |
() |
| NF C93-767-1994 |
印制電路用基材.第2部分:規范.第17號規范:多層印制板制作用的規定易燃性的聚酰亞胺編織玻璃纖維織物覆銅層 |
(Base materials for printed circuits. Part 2 : specifications. Specification number 17 : thin polyimide woven glass fabric copper-clad laminated sheet of defined flammability for use in the fabrication of multilayer printed board.) |
| NF C93-767/A1-1996 |
NF EN 60249-2-17-1994的修改1 |
() |
| NF C93-767/A2-2001 |
印制電路用基材.第2部分:規范.第17號規范:多層印制板制作用規定易燃性的薄銅涂覆聚酰亞胺層壓玻璃布板 |
(Base materials for printed circuits. Part 2 : specifications - Specification number 17 : thin polyimide oven glass fabric copper-clad laminated sheet of defined flammability for use in the fabrication) |
| NF C93-7671-1996 |
NF C93-767-94補充件1和2 |
() |
| NF C93-768-1994 |
印制電路用基材.第2部分:規范.第18號規范:規定易燃性的比斯瑪勒米德(bismaleimide)/三嗪改良型環氧化合物編 |
(Base materials for printed circuits. Part 2 : specifications. Specification number 18 : bismaleimide/triazine modified epoxide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test).) |
| NF C93-768/A1-1996 |
NF EN 60249-2-18-1994的修改1 |
() |
| NF C93-768/A2-2001 |
印制電路用基材.第2部分:規范.第18號規范.規定易燃性的帶雙馬來酰亞胺三嗪的銅涂覆改良性環氧化物層壓玻璃 |
(Base materials for printed circuits. Part 2 : specifications - Specification number 18 : bismaleimide/triazine modified epoxide woven glass fabric copper-clad laminated sheet of defined flammability () |
| NF C93-7681-1996 |
NF C93-768-94補充件1和2 |
() |
| NF C93-769-1994 |
印制電路用基材.第2部分:規范.第19號規范:多層印制板制作用的規定易燃性的bismaleimide/三嗪改良型環氧化物 |
() |
| NF C93-769/A1-1996 |
NF EN 60249-2-19-1994的修改1 |
() |
| NF C93-7691-1996 |
NF C93-769-94補充件1和2 |
() |
| NF C93-770-3-3-2002 |
印制板和其它互連結構用材料.第3-3部分:包被和非包被的非增強基材(用于撓性印制板)的分規范集.粘著的涂覆撓 |
(Materials for printed boards and other interconnecting structures - Part 3-3 : sectional specification set for unreinforced base materials, clad and unclad (intented for flexible printed boards) - Adh) |
| NF C93-770-3-4-2002 |
印制板和其它互連結構用材料.第3-4部分:包被和非包被的非增強基材(用于撓性印制板)的分規范集.粘著的涂覆撓 |
(Materials for printed boards and other interconnecting structures - Part 3-4 : sectional specification set for unreinforced base materials, clad and unclad (intented for flexible printed boards) - Adh) |
| NF C93-770-3-5-2002 |
印制板和其它互連結構用材料.第3-5部分:包被和非包被的非增強基材(用于撓性印制板)的分規范集.轉換粘性薄膜 |
(Materials for printed boards and other interconnecting structures - Part 3-5 : sectional specification set for unreinforced base materials, clad and unclad (intented for flexible printed boards) - Tra) |
| NF C93-771-1996 |
互連結構用材料.第7部分:限制芯材料分規范組.第1節:銅/鐵鑷合金/鑷銅合金 |
(Materials for interconnection structures. Part 7 : sectional specification set for restraining core materials. Section 1 : copper/invar/coper.) |
| NF C93-780-2-10-2003 |
印制板和其它互連結構用材料.第2-10部分:包被和非包被增強基材.阻燃型銅包被改良或未改良的氰酸酯溴化環氧 |
() |
| NF C93-780-2-12-2002 |
印制板和其它互連結構用材料.第2-12部分:包被和非包被的非增強基材(用于撓性印制板)的分規范集.阻燃型銅包 |
(Materials for printed boards and other interconnecting structures - Part 2-12 : sectional specification set for reinforced base materials, clad and unclad - Epoxide non-woven aramid laminate of define) |
| NF C93-780-2-13-2002 |
印制板和其它互連結構用材料.第2-13部分:包被和非包被的非增強基材(用于撓性印制板)的分規范集.阻燃型銅包 |
(Materials for printed boards and other interconnecting structures - Part 2-13 : sectional specification set for reinforced base materials, clad and unclad - Cyanate ester non-woven aramid laminate of) |
| NF C93-780-2-18-2002 |
印制板和其它互連結構用材料.第2-18部分:包覆或非包覆增強基材.規定了易燃性的覆銅非編織玻璃纖維增強層壓 |
(Materials for printed boards and other interconnecting structures - Part 2-18 : reinforced base materials, clad and unclad - Polyester non-woven fibreglass reinforced laminated sheet of defined flamma) |
| NF C93-780-2-19-2002 |
印制板和其它互連結構用材料.第2-19部分:被包和非包被增強基材料.規定燃燒性的環氧交叉簾布層線性纖維玻璃 |
(Materials for printed boards and other interconnecting structures - Part 2-19 : reinforced base materials, clad and unclad - Epoxide cross-plied linear fibreglass-reinforced laminated sheets of define) |
| NF C93-780-2-4-2002 |
印制板和其它互連結構用材料.第2-4部分:包覆和非包覆增強基材.規定了易燃性的覆銅聚酯非編織/編織玻璃纖維 |
(Materials for printed boards and other interconnecting structures - Part 2-4 : reinforced base materials clad and unclad - Polyester non-woven/woven fibreglass laminated sheet of defined flammability) |
| NF C93-780-2-7-2002 |
印制板和其它互連結構用材料.第2-7部分:涂覆和非涂覆增強基材.規定了易燃性的環氧編織E型玻璃纖維層壓覆銅 |
(Materials for printed boards and other interconnecting structures - Part 2-7 : reinforced base materials clad and unclad - Epoxide woven E-glass laminated sheet of defined flammability (vertical burni) |
| NF C93-781-1996 |
連接結構用材料.第5部分:帶和不帶涂層的導電箔和薄膜的分規范.第1節:銅箔(用于生產銅涂覆基材) |
(Materials for interconnection structures. Part 5 : sectional specification set for conductive foils and films with and without coatings. Section 1 : copper foils (for the manufacture of copper-clad base materials).) |
| NF C93-784-1997 |
互連結構用材料.第5部分:有或無涂覆的導電箔和膜的分規范組.第4節:導電油墨 |
(Materials for interconnection structures. Part 5 : sectional specification set for conductive foils and films with or without coatings. Section 4 : conductive inks.) |
| NF C93-791-1996 |
印制板.電子數據的描述和傳送.第791部分:裸板數字格式電試驗信息 |
(Printed boards. Electronic data description and transfer. Part 7 : bare board electric test information in digital form.) |
| NF C93-800-1999 |
纖維光學傳感器.第1部分:總規范 |
(Fibre optic sensors. Part 1 : generic specification.) |
| NF C93-801-1-2001 |
光纖系統用半導體光電器件.第1部分:基本額定值及特性 |
(Semiconductor optoelectronic devices for fibre optic system applications - Part 1 : essential ratings and characteristics.) |
| NF C93-801-2-2001 |
光纖系統用半導體光電器件.第2部分:測量方法 |
(Semiconductor optoelectronic devices for fibre optic system applications - Part 1 : measuring methods.) |
| NF C93-802-1-1998 |
光纖放大器.第1部分:總規范 |
(Optical fibre amplifiers. Part 1 : generic specification.) |
| NF C93-802-2-2001 |
光纖放大器.第2部分:數字設施.性能規范模板 |
(Optical fibre amplifiers - Part 2 : digital applications - Performance specification template.) |
| NF C93-802-4-2003 |
光纖放大器.第4部分:多信道應用.性能規范模板 |
(Optical amplifiers - Part 4 : multichannel applications - Performance specification template.) |
| NF C93-802-5-2-2003 |
光學放大器.第5-2部分:合格鑒定規范.光纖放大器可靠性合格鑒定 |
(Optical amplifiers - Part 5-2 : qualification specifications - Reliability qualification for optical fibre amplifiers.) |
| NF C93-803-1997 |
光纖功率儀校正 |
(Calibration of fibre optic power meters.) |
| NF C93-805-1-1-1998 |
光纖增強器.基本規范.第1-1部分:獲取參數的試驗方法.光學光譜分析器 |
(Optical fibre amplifiers. Basic specification. Part 1-1 : test methods for gain parameters. Optical spectrum analyzer.) |
| NF C93-805-1-2-1998 |
光纖增強器.基本規范.第1-2部分:獲取參數的試驗方法.電子光譜分析器 |
(Optical fibre amplifiers. Basic specification. Part 1-2 : test methods for gain parameters. Electrical spectrum analyzer.) |
| NF C93-805-1-3-1998 |
光纖增強器.基本規范.第1-3部分:獲取參數的試驗方法.光電測量表 |
(Optical fibre amplifiers. Basic specification. Part 1-3 : test methods for gain parameters. Optical power meter.) |
| NF C93-805-10-1-2003 |
光學放大器.試驗方法.第10-1部分:多道參數.使用光學開關和光譜分析儀的脈沖法 |
(Optical amplifiers - Test methods - Part 10-1 : multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer.) |
| NF C93-805-10-2-2003 |
光學放大器.試驗方法.第10-2部分:多道參數.使用選通光頻譜分析儀的脈沖法 |
(Optical amplifiers - Test methods - Part 10-2 : multichannel parameters - Pulse method using a gated optical spectrum analyzer.) |
| NF C93-805-10-3-2003 |
光學放大器.試驗方法.第10-3部分:多道參數.探測法 |
(Optical amplifiers - Test methods - Part 10-3 : multichannel parameters - Probe methods.) |
| NF C93-805-11-1-2003 |
光學放大器試驗方法.第11-1部分:偏振模式分散.瓊斯矩陣特征分析法(JME) |
(Optical amplifier test methods - Part 11-1 : polarization mode dispersion - Jones matrix eigenanalysis method (JME).) |
| NF C93-805-2-1-1998 |
光纖增強器.基本規范.第2-1部分:光電參數的試驗方法.光學光譜分析器 |
(Optical fibre amplifiers. Basic specification. Part 2-1 : test methods for optical power parameters. Optical spectrum analyzer.) |
| NF C93-805-2-2-1998 |
光纖放大器.基本規范.第2-2部分:光強度參數的試驗方法.電頻譜分析器 |
(Optical fibre amplifiers. Basic specification. Part 2-2 : test methods for optical power parameters. Electrical spectrum analyzer.) |
| NF C93-805-2-3-1998 |
光纖放大器.基本規范.第2-3部分:光電參數基本試驗方法.光電計 |
(Optical fibre amplifiers. Basic specification. Part 2-3 : test methods for optical power parameters. Optical power meter.) |
| NF C93-805-3-2-2003 |
光學放大器.第3-2部分:噪音指數參數的試驗方法.電頻譜分析儀法 |
(Optical amplifiers - Part 3-2 : test methods for noise figure parameters - Electrical spectrum analyser method.) |
| NF C93-805-3-2001 |
光纖放大器.基本規范.第3部分:試驗方法和噪音圖形參數 |
(Optical fibre amplifiers - Basic specification - Part 3 : test methods for noise figure parameters.) |
| NF C93-805-5-1-2001 |
光纖放大器.基本規范.第5-1部分:反射參數的試驗方法.光譜分析儀 |
(Optical fibre amplifiers - Basic specification - Part 5-1 : test methods for reflectance parameters - Optical spectrum analyser.) |
| NF C93-805-5-3-2002 |
光纖放大器.基礎規范.第5-3部分:反射參數的試驗方法.使用光電譜分析儀的反射公差試驗法 |
(Optical fibre amplifiers - Basic specification - Part 5-3 : test methods for reflectance parameters - Reflectance tolerance using an electrical spectrum analyser.) |
| NF C93-805-6-1-1998 |
光纖放大器. 基本規范.第6-1部分:泵漏參數的試驗方法.光信號分離器 |
(Optical fibre amplifiers. Basic specification. Part 6-1 : test methods for pump leakage parameters. Optical demultiplexer.) |
| NF C93-805-7-1-1998 |
光纖放大器. 基本規范.第7-1部分:波譜外插入損失的試驗方法.濾過光電計 |
(Optical fibre amplifiers. Basic specification. Part 7-1 : test methods for out-of-band insertion losses. Filtered optical power meter.) |
| NF C93-806-1998 |
遠程通信用激光模塊.可靠性評估 |
(Laser modules used for telecommunication. Reliability assessment.) |
| NF C93-807-1-1-1998 |
光纖通信子系統基本試驗程序.第1-1部分:一般通信子系統的試驗程序.單模式光纖電纜用發射機輸出光能的測量 |
(Fibre optic communication subsystem basic test procedures. Part 1-1 : test procedures for general communication subsystems. Transmitter output optical power measurement for single-mode optical fibre cable.) |
| NF C93-807-1-3-1999 |
纖維光學通信子系統基本試驗程序.第1-3部分:一般通信子系統的試驗程序.中心波長和譜寬的測量 |
(Fibre optic communication subsystem basic test procedures. Part 1-3 : test procedures for general communication subsystems. Central wavelength and spectral width measurement.) |
| NF C93-807-2-1-1999 |
光纖通信分系統基本試驗程序.第2-1部分:數字系統試驗程序.接收器靈敏度和過載測量 |
(Fibre optic communication subsystem basic test procedures - Part 2-1 : test procedures for digital systems - Receiver sensitivity and overload measurement.) |
| NF C93-807-2-2-1999 |
纖維光學通信子系統基本試驗過程.第2-2部分:數字系統試驗過程.光學眼孔圖,波形和消亡比率 |
(Fibre optic communication subsystem basic test procedures. Part 2-2 : test procedures for digital systems. Optical eye pattern, waveform and extinction ratio.) |
| NF C93-807-2-4-1998 |
光纖通信子系統基本試驗程序.第2-4部分:數字系統的試驗程序.比特速率公差測量 |
(Fibre optic communication subsystem basic test procedures. Part 2-4 : test procedures for digital systems. Bit-rate tolerance measurement.) |
| NF C93-807-2-5-1998 |
光纖通信子系統基本試驗程序.第2-5部分:數字系統的試驗程序.不穩定性傳輸功能測量 |
(Fibre optic communication subsystem basic test procedures. Part 2-5 : test procedures for digital systems. Jitter transfer function measurement.) |
| NF C93-807-2-9-2003 |
光纖通信子系統基本試驗程序.第2-9部分:數字系統.密集型波分復用系統光學信噪比的測量 |
(Fibre optic communication subsystem test procedures - Part 2-9 : digital systems - Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems.) |
| NF C93-807-4-2-2000 |
光纖通信子系統基本試驗程序.第4-2部分:光纜性能指標.單模光纜性能指標的衰減 |
(Fibre optic communication subsystem basic test procedures - Part 4-2 : Fibre optic cable plant - Single-mode fibre optic cable plant attenuation.) |
| NF C93-808-1-1999 |
光纖通信子系統.第1部分:總規范 |
(Fibre optic communication subsystems - Part 1 : generic specification.) |
| NF C93-810-1995 |
光纖和光纜用連接器組總規范.第1部分:要求、試驗方法和合格認可程序 |
(Generic specification. Connector sets for optical fibres and cables. Part 1 : requirements, tests methods and qualification approval procedures.) |
| NF C93-811-1987 |
光導纖維互聯裝置和無源件.光纖和電纜連接件的分規范.CF03型 |
(FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. SECTIONAL SPECIFICATION OF CONNECTORS FOR OPTICAL FIBRES AND CABLES. TYPE CF03.) |
| NF C93-812-1987 |
光導纖維互聯裝置和無源件.光纖和電纜連接件的分規范.CF04型 |
(FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. SECTIONAL SPECIFICATION OF CONNECTORS FOR OPTICAL FIBRES AND CABLES. TYPE CF04.) |
| NF C93-813-1987 |
光導纖維互聯裝置和無源件.光纖和電纜連接件的分規范.CF05型 |
(FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. SECTIONAL SPECIFICATION OF CONNECTORS FOR OPTICAL FIBRES AND CABLES. TYPE CF05.) |
| NF C93-814-1989 |
電子件.光導纖維無源件和連接裝置.光學件過渡規范 |
(FIBRE OPTICS INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. SECTIONAL SPECIFICATION FOR MECHANICAL SPLICES.) |
| NF C93-815-1995 |
空白詳細規范:光纖和光纜連接器.Ⅰ類環境(歐洲標準EN 186001) |
(BLANK DETAIL SPECIFICATION : CONNECTORS FOR OPTICAL FIBRES AND CABLES. ENVIRONMENTAL CATEGORY I. (EUROPEAN STANDARD EN 186001).) |
| NF C93-816-1995 |
光纖和光纜連接器空白詳細規范.Ⅱ類環境 |
(BLANK DETAIL SPECIFICATION : CONNECTORS FOR OPTICAL FIBRES AND CABLES. ENVIRONMENTAL CATEGORY II. (EUROPEAN STANDARD EN 186002).) |
| NF C93-817-1995 |
光纖和光纜連接器空白詳細規范.Ⅲ類環境 |
(BLANK DETAIL SPECIFICATION : CONNECTORS FOR OPTICAL FIBRES AND CABLES. ENVIRONMENTAL CATEGORY III. (EUROPEAN STANDARD EN 186003).) |
| NF C93-818-1995 |
光纖和光纜連接器空白詳細規范.Ⅳ類環境 |
(BLANK DETAIL SPECIFICATION : CONNECTORS FOR OPTICAL FIBRES AND CABLES. ENVIRONMENTAL CATEGORY IV. (EUROPEAN STANDARD EN 186004).) |
| NF C93-819-1995 |
光纖和光纜連接器空白詳細規范.V類環境 |
(BLANK DETAIL SPECIFICATION. CONNECTORS FOR OPTICAL FIBRES AND CABLES. ENVIRONMENTAL CATEGORY V. (EUROPEAN STANDARD EN 186005).) |
| NF C93-820-1995 |
分規范:光纖和光纜用連接裝置.CF08型(歐洲標準EN 186210) |
(SECTIONAL SPECIFICATION. CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES. TYPE CF08. (EUROPEAN STANDARD EN 186210).) |
| NF C93-821-1995 |
分規范.光纖和光纜的連接器件.類型F-SMA(歐洲標準EN 186100) |
(SECTIONAL SPECIFICATION. CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES. TYPE F-SMA. (EUROPEAN STANDARD EN 186100).) |
| NF C93-822-1995 |
分規范.光纖和光纜的連接器件.類型FC(歐洲標準186110) |
(SECTIONAL SPECIFICATION. CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES. TYPE FC. (EUROPEAN STANDARD EN 186110).) |
| NF C93-823-1995 |
分規范.光纖和光纜的連接器件.類型LSA |
(SECTIONAL SPECIFICATION. CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES. TYPE LSA. (EUROPEAN STANDARD EN 186130).) |
| NF C93-824-1995 |
分規范.光纖和光纜的連接器件.類型LSB(歐洲標準186180) |
(SECTIONAL SPECIFICATION. CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES. TYPE LSB. (EUROPEAN STANDARD EN 186180).) |
| NF C93-825-1995 |
分規范.光纖和光纜的連接器件.類型LSC(歐洲標準186220) |
(Sectional specification. Connector sets for optical fibres and cables. Type lsc.) |
| NF C93-826-1995 |
分規范.光纖和光纜的連接器件.類型LSF(歐洲標準186230) |
(Sectional specification. Connector sets for optical fibres and cables. Type lsf.) |
| NF C93-827-1-2002 |
光纖附件.第1部分:總規范 |
(Fibre optic enclosures - Part 1 : generic specification.) |
| NF C93-828-1997 |
光纖無源部件和電纜組件.第1部分:容量鑒定.總規范 |
(Fibre optic passive components and cable assemblies. Part 1 : capability approval. Generic specification.) |
| NF C93-829-1997 |
纖維光學扇形輸出器.第1部分:總規范 |
(Fibre optic fan-outs. Part 1 : generic specification.) |
| NF C93-830-2001 |
不根據波長選擇的光纖分路裝置.第1部分:總規范 |
(Non-wavelength-selective fibre optic branching devices - Part 1 : generic specification.) |
| NF C93-831-1-1998 |
光纖分路器件.第1-1部分:空白詳細規范 |
(Fibre optic branching devices. Part 1-1 : blank detail specification.) |
| NF C93-831-1995 |
光纖分路器件的空白詳細規范.型號:非波長選擇的星形、發射分光離器/連光器 |
(Blank detail specification. Fibre optic branching devices. Type : non wavelength selective transmissive star.) |
| NF C93-832-1995 |
光纖分路器件的空白詳細規范.型號:非波長選擇的星形、多路調制/解調制器 |
(BLANK DETAIL SPECIFICATION. FIBRE OPTIC BRANCHING DEVICES. TYPE : WAVELENGTH SELECTIVE TRANSMISSIVE STAR. (EUROPEAN STANDARD EN 181102).) |
| NF C93-833-1-2000 |
光纖和光纜連接器.第1部分:總規范 |
(Connectors for optical fibres and cables - Part 1 : generic specification.) |
| NF C93-833-1997 |
光纖和光纜連接器.第19部分:SC-D(uplex)型,光纖連接器的分規范 |
(Connectors for optical fibres and cables. Part 19 : sectional specification for fibre optic connector. Type SC-D(uplex).) |
| NF C93-837-1998 |
空白詳細規范.光纖分支裝置.型.電信應用的非波長選擇傳送星 |
(BLANK DETAIL SPECIFICATION : FIBRE OPTIC BRANCHING DEVICES. TYPE : NON WAVELENGTH SELECTIVE TRANSMISSIVE STAR FOR TELECOMMUNICATION APPLICATION. (EUROPEAN STANDARD EN 181103).) |
| NF C93-838-1998 |
空白詳細規范.光纖分支裝置.型.電信應用波長選擇傳送星 |
(BLANK DETAIL SPECIFICATION : FIBRE OPTIC BRANCHING DEVICES. TYPE : WAVELENGTH SELECTIVE TRANSMISSIVE STAR FOR TELECOMMUNICATION APPLICATION. (EUROPEAN STANDARD EN 181104).) |
| NF C93-840-1-1-2003 |
光纖.第1-1部分:測量方法和試驗程序.總則和指南 |
(Optical fibres - Part 1-1 : measurement methods and test procedures - General and guidance.) |
| NF C93-840-1-20-2002 |
光學纖維.第1-20部分:測量方法和試驗規程.纖維幾何 |
(Optical fibres - Part 1-20 : measurement methods and test procedures - Fibre geometry.) |
| NF C93-840-1-21-2002 |
光學纖維.第1-21部分:測量方法和試驗規程.鍍涂幾何 |
(Optical fibres - Part 1-21 : measurement methods and test procedures - Coating geometry.) |
| NF C93-840-1-22-2002 |
光學纖維.第1-22部分:測量方法和試驗程序.長度測量 |
(Optical fibres - Part 1-22 : measurements methods and test procedures - Length measurement.) |
| NF C93-840-1-30-2002 |
光學纖維.第1-30部分:測量方法和試驗規程.纖維驗證試驗 |
(Optical fibres - Part 1-30 : measurement methods and test procedures - Fibre proof test.) |
| NF C93-840-1-31-2002 |
光學纖維.第1-31部分:測量方法和試驗程序.抗拉強度 |
(Optical fibres - Part 1-31 : measurement methods and test procedures - Tensile strength.) |
| NF C93-840-1-33-2002 |
光學纖維.第1-33部分:測量方法和試驗規程.應力腐蝕性 |
(Optical fibres - Part 1-33 : measurement methods and test procedures - Stress corrosion susceptibility.) |
| NF C93-840-1-34-2002 |
光學纖維.第1-34部分:測量方法和試驗程序.纖維卷曲度 |
(Optical fibres - Part 1-34 : measurement methods and test procedures - Fibre curl.) |
| NF C93-840-1-41-2002 |
光學纖維.第1-41部分:測量方法和試驗程序.帶寬度 |
(Optical fibres - Part 1-41 : measurement methods and test procedures - Bandwidth.) |
| NF C93-840-1-42-2002 |
光學纖維.第1-42部分:測量方法和試驗程序.顏色描述 |
(Optical fibres - Part 1-42 : measurement methods and test procedures - Chromatic dispersion.) |
| NF C93-840-1-43-2002 |
光學纖維.第1-43部分:測量方法和試驗程序.數字孔徑 |
(Optical fibres - Part 1-43 : measurement methods and test procedures - Numerical aperture.) |
| NF C93-840-1-44-2002 |
光學纖維.第1-44部分:測量方法和試驗程序.截止波長 |
(Optical fibres - Part 1-44 : measurements methods and test procedures - Cut-off wavelength.) |
| NF C93-840-1-46-2002 |
光學纖維.第1-46部分:測量方法和試驗程序.監測光透射率變化 |
(Optical fibres - Part 1-46 : measurement methods and test procedures - Monitoring of changes in optical transmittance.) |
| NF C93-840-1-47-2002 |
光學纖維.第1-47部分:測量方法和試驗程序.微彎曲損耗 |
(Optical fibres - Part 1-47 : measurement methods and test procedures - Macrobending loss.) |
| NF C93-840-1-50-2002 |
光學纖維.第1-50部分:測量方法和試驗規程.濕熱(穩態) |
(Optical fibres - Part 1-50 : measurement methods and test procedures - Damp heat (steady state).) |
| NF C93-840-1-51-2002 |
光學纖維.第1-51部分:測量方法和試驗程序.干熱 |
(Optical fibres - Part 1-51 : measurement methods and test procedures - Dry heat.) |
| NF C93-840-1-52-2002 |
光學纖維.第1-52部分:測量方法和試驗程序.溫度變化 |
(Optical fibres - Part 1-52 : measurement methods and test procedures - Change of temperature.) |
| NF C93-840-1-53-2002 |
光學纖維.第1-53部分:測量方法和試驗程序.水浸濕 |
(Optical fibres - Part 1-53 : measurement methods and test procedures - Water immersion.) |
| NF C93-840-1987 |
電子件.光導纖維過渡總規范 |
(ELECTRONIC COMPONENTS. GENERIC SPECIFICATION FOR OPTICAL FIBRES.) |
| NF C93-841-1989 |
光導纖維過渡規范 |
(SECTIONAL SPECIFICATION FOR OPTICAL FIBRES.) |
| NF C93-841-2-10-2002 |
光纖.第2-10部分:產品規范.A1類多模光纖分規范 |
(Optical fibres - Part 2-10 : product specifications - Sectional specification for category A1 multimode fibres.) |
| NF C93-841-2-20-2002 |
光纖.第2-20部分:產品規范.A2類多模光纖分規范 |
(Optical fibres - Part 2-20 : product specifications - Sectional specification for category A2 multimode fibres.) |
| NF C93-841-2-30-2002 |
光纖.第2-30部分:產品規范.A3類多模光纖分規范 |
(Optical fibres - Part 2-30 : product specifications - Sectional specification for category A3 multimode fibres.) |
| NF C93-841-2-40-2002 |
光纖.第2-40部分:產品規范.A4類多模光纖分規范 |
(Optical fibres - Part 2-40 : product specifications - Sectional specification for category A4 multimode fibres.) |
| NF C93-841-2-50-2002 |
光纖.第2-50部分:產品規范.B類單模光纖分規范 |
(Optical fibres - Part 2-50 : product specifications - Sectional specification for class B single-mode fibres.) |
| NF C93-842-1992 |
電信領域用光纖的產品規范 |
(Product specification for optical fibres used in the telecom field.) |
| NF C93-850-1-1-2002 |
光學纖維電纜.第1-1部分:總規范.總則 |
(Optical fibre cables - Part 1-1 : generic specification - General.) |
| NF C93-850-1-2-2000 |
光纖電纜.第1-2部分:總規范.基本光纜試驗過程 |
(Optical fibre cables - Part 1-2 : generic specification - Basic optical cable test procedures.) |
| NF C93-850-1-2/A1-2003 |
光纜.第1-2部分:總規范.光纜基本試驗程序 |
(Optical fibre cables - Part 1-2 : generic specificaiton - Basic optical cable test procedures.) |
| NF C93-850-2-10-2003 |
光學纖維電纜.第2-10部分:室內光纜.單股光纜和雙股光纜的系列規范 |
(Optical fibre cables - Part 2-10 : indoor cables - Family specification for simplex and duplex cables.) |
| NF C93-850-2-20-2003 |
光學纖維電纜.第2-20部分:室內光纜.多纖配電光纜的系列規范 |
(Optical fibre cables - Part 2-20 : indoor cables - Family specification for multi-fibre optical distribution cables.) |
| NF C93-850-2-2003 |
光學纖維電纜.第2部分:室內光纜.分規范 |
(Optical fibre cables - Part 2 : indoor cables - Sectional specification.) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com