標準號 |
中文名稱 |
英文名稱 |
| NF L17-781-1992 |
航空航天系列.纖維束.G起重性的測定 |
(AEROSPACE SERIES. ROVINGS. DETERMINATION OF THE FUZZ.) |
| NF L17-900-1998 |
航空航天系列.降落傘織物.機械規范起草指南 |
(AEROSPACE SERIES. PARACHUTE FABRIC. GUIDELINES FOR THE DRAFTING OF TECHNICAL SPECIFICATIONS.) |
| NF L17-900-2003 |
航空航天系列.降落傘織物.技術規范起草指南 |
(Aerospace series - Parachute fabric - Guidelines for the drafting of technical specifications.) |
| NF L17-910-1994 |
航空航天系列.降落傘織物.飛機翼布透氣性的測定 |
(Aerospace series. Textiles for parachutes. Determination of the air permeability of wing fabrics.) |
| NF L17-911-1994 |
航空航天系列.降落傘.紡織物.布帶和膠帶的試驗.耐磨試驗方法 |
(AEROSPACE SERIES. PARACHUTES. TEXTILES. TESTING OF STRAPS AND TAPES. TEST METHOD FOR ABRASIVE WEAR.) |
| NF L17-913-1994 |
航空和航天系列.降落傘用織物.扭編部分的試驗.直徑或寬度和厚度和單位長度質量的測定 |
(AEROSPACE SERIES. TEXTILES FOR PARACHUTES. TESTS ON BRAIDED PARTS. DETERMINATION OF THE DIAMETER OR WIDTH AND THICKNESS AND THE LINEAR MASS.) |
| NF L17-914-1995 |
航空航天系列.降落傘織物.布帶和膠帶的試驗.曲度的測定 |
(AEROSPACE SERIES. PARACHUTE FABRIC. TESTING OF STRAPS AND TAPES. DETERMINATION OF CURVATURE.) |
| NF L17-915-1995 |
航空航天系列.降落傘織物.布帶和膠帶的試驗.扭接的測定 |
(AEROSPACE SERIES. PARACHUTE FABRIC. TESTING OF TAPES AND STRAPS. DETERMINATION OF KINKING.) |
| NF L17-916-1995 |
航空航天系列.降落傘纖維.扭編繩的試驗.錐形細紗球的數目的測定 |
(AEROSPACE SERIES. PARACHUTE FABRIC. TESTING OF BRAIDED ROPE. DETERMINATION OF THE NUMBER OF YARN COPS.) |
| NF L17-917-1995 |
航空航天系列.降落傘纖維.扭編繩的試驗.網織品的檢測 |
(AREOSPACE SERIES. PARACHUTE FABRIC. TESTING OF BRAIDED ROPE. DETERMINATION OF MESHWORK.) |
| NF L17-918-1997 |
航空航天系列.降落傘纖維.扭編繩/編帶和窄幅織物的試驗.浸入冷水后尺寸變化的測定 |
(AEROSPACE SERIES. PARACHUTE FABRIC. TESTS ON BRAIDED ROPES/BRAIDS AND NARROW FABRICS. DETERMINATION OF DIMENSIONAL VARIATIONS AFTER IMMERSION IN COLD WATER.) |
| NF L17-919-1998 |
航空航天系列.編織材料試驗.2/3拉力下斷裂負載的測定 |
(AEROSPACE SERIES. TESTS ON BRAIDED ARTICLES. DETERMINATION OF THE BREAKING LOAD UNDER TRACTION AT 2/3 EXTENSION.) |
| NF L17-920-1999 |
航空航天系列.降落傘織物.布帶和膠帶的試驗.連接長度和剛性的測定 |
(AEROSPACE SERIES. PARACHUTE FABRIC. TESTING OF STRAPS AND TAPES. DETERMINATION OF THE BENDING LENGTH AND RIGIDITY.) |
| NF L17-950-1995 |
航空工業.飛機結構纖維用合成纖維.試板的制備 |
(AIRCRAFT INDUSTRY. SYNTHETIC CLOTHS FOR THE FABRIC OF AIRPLANE STRUCTURES. REALIZATION OF TEST PANELS.) |
| NF L17-951-1995 |
航空工業.飛機結構纖維用合成纖維.風化后機械特性的測定 |
(Aircraft industry. Synthetic cloths for the fabric of airplane structures. Determination of the mechanical characteristics after weathering.) |
| NF L17-952-1995 |
航空工業.飛機結構纖維用合成纖維.漿紗并絞纖維粘結的剝離強度 |
(Aircraft industry. Synthetic cloths for the fabric of airplane structures. Peeling strength of the bonding of taping fabric.) |
| NF L17-953-1995 |
航空工業.飛機結構纖維用合成織物.發貨時測定老化前后粘著保護的拉伸纖維的抗剪切強度 |
(Aircraft industry. Synthetic cloths for the fabric of airplane structures. Determination of shear sstrength by stretching cloths, in the delivery condition, stuck then protected before and after aging.) |
| NF L17-955-1995 |
飛機工業.飛機結構纖維用合成纖維.在發貨條件下纖維的透氣性和透濕性測量 |
(Aircraft industry. Synthetic cloths for the fabric of airplane structures. Determination of the permeability-wettability of cloths in deliverry condition.) |
| NF L17-956-1995 |
航空工業.飛機結構纖維用合成纖維.在交貨條件下通過纖維的拉伸試驗測定在折斷狀態下的負荷和拉伸率及無涂層 |
(Aircraft industry. Synthetic cloths for the fabric of airplane structures. Determination of the load and elongation at rupture by tensile testing of cloths in delivery condition and of free coated cloths.) |
| NF L17-990-1995 |
航空工業.木結構飛機用粘合劑.技術規范和試驗方法 |
(AIRCRAFT INDUSTRY. ADHESIVES FOR WOODEN AIRPLANE STRUCTURES. TECHNICAL SPECIFICATION AND TEST METHODS.) |
| NF L17-996-1995 |
航空工業.轉換的原木.技術規范,試驗方法和使用條件 |
(Aircraft industry. Converted raw timber. Technical specification, test methods and conditions of use.) |
| NF L18-130-1995 |
航空航天系列.膠合板.供料規范和試驗方法 |
(Aerospace series. Wood based panels. Procurement specification and test methods.) |
| NF L18-200-1968 |
噴管用石墨產品驗收條件 |
(ACCEPTANCE CONDITIONS FOR GRAPHITE PRODUCTS FOR EXHAUST NOZZLES.) |
| NF L18-510-1969 |
透明塑料板 |
(SHEETS MADE OF TRANSPARENT PLASTICS MATERIAL.) |
| NF L18-510M1-1975 |
透明塑板 |
(TRANSPARENT PLASTIC MATERIAL, SHEETS.) |
| NF L19-003-1992 |
航空航天系列.件和非金屬材料中的管腔蜂窩狀材料 |
(AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS IN COMPONENT AND NON-METALLIC MATEIRALS. GENERALITIES.) |
| NF L19-031-1993 |
航空航天系列.管狀單,六角形,玻璃纖維,酚醛樹脂浸漬的蜂窩狀材料.產品標準 |
(AEROSPACE SERIES. HONEYCOMB MATERIAL WITH TUBULAR CELLS, HEXAGONAL, FIBRE GLASS, PHENOLIC RESIN IMPREGNATED. PRODUCT STANDARD.) |
| NF L19-032-1993 |
航空航天系列.管狀單,矩形,玻璃纖維,酚醛樹脂浸漬的蜂窩狀材料.產品標準 |
(AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, RECTANGULAR, FIBRE GLASS, PHENOLIC RESIN IMPREGNATED. PRODUCT STANDARD.) |
| NF L19-033-1993 |
航空航天系列.管狀單,撓性,玻璃纖維,酚醛樹脂浸漬的蜂窩狀材料.產品標準 |
(AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, FLEXIBLE, FIBRE GLASS, PHENOLIC RESIN IMPREGNATED. PRODUCT STANDARD.) |
| NF L19-034-1992 |
航空航天系列.蜂窩狀材料.六方管腔.聚酰胺芳族紙,酚醛樹脂浸漬的.標準產品 |
(AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, HEXAGONAL, POLYAMIDE AROMATIC PAPER, PHENOLIC RESIN IMPREGNATED. PRODUCT STANDARD.) |
| NF L19-035-1993 |
航空航天系列.管狀單、矩形、聚酰胺芳族紙和酚醛樹脂浸漬的蜂窩型材料.產品標準 |
(AREOSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, RECTANGULAR, POLYAMIDE AROMATIC PAPER, PHENOLIC RESIN IMPREGNATED. PRODUCT STANDARD.) |
| NF L19-036-1993 |
航空航天系列.管狀單、撓性、聚酰胺芳族紙和酚醛樹脂浸漬的蜂窩型材料.產品標準 |
(AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, FLEXIBLE, POLYAMIDE AROMATIC PAPER, PHENOLIC RESIN IMPREGNATED. PRODUCT STANDARD.) |
| NF L19-037-1993 |
航空航天系列.管狀單,六角形,碳纖維,酚醛樹脂浸漬的蜂窩狀材料.產品標準 |
(AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, HEXAGONAL CARBON FABRIC, PHENOLIC RESIN IMPREGNATED ORIENTED AT PLUS OVER MINUS. PRODUCT STANDARD.) |
| NF L19-040-1993 |
航空航天系列.管狀單,六角形,玻璃纖維,酚醛樹脂浸漬的蜂窩狀材料,正負45度取向.產品標準 |
(AEROSPACE SERIES. HONEYCOMB MATERIALS TUBULAR CELLS, HEXAGONAL, FIBRE GLASS, PHENOLIC RESIN IMPREGNATED, ORIENTED AT PLUS OVER MINUS 45 DEGREES. PRODUCT STANDARD.) |
| NF L19-041-1993 |
航空航天系列.管狀單,矩形,玻璃纖維,酚醛樹脂浸漬的蜂窩狀材料,正負45度取向.產品標準 |
(AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, RECTANGULAR, FIBRE GLASS, PHENOLIC RESIN IMPREGNATED, ORIENTED AT PLUS OVER MINUS 45 DEGREES. PRODUCT STANDARD.) |
| NF L19-043-1993 |
航空航天系列.管狀單,六角形,牛皮紙,酚醛樹脂浸漬的蜂窩狀材料.產品標準 |
(AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, HEXAGONAL, KRAFT PAPER, PHENOLIC RESIN IMPREGNATED. PRODUCT STANDARD.) |
| NF L19-046-1993 |
航空航天系列.管狀單,六角形,玻璃纖維,聚酰亞胺樹脂浸漬的蜂窩狀材料,正負45度取向.產品標準 |
(AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, HEXAGONAL, FIBRE GLASS, POLYMIMIDE RESIN IMPREGNATED, ORIENTED AT PLUS OVER MINUS 45 DEGREES. PRODUCT STANDARD.) |
| NF L19-101-1-1992 |
航空和航天.用鋁合金制的管形隔間器材.技術規范.一般要求 |
(AEROSPACE SERIES. HONEYCOMB MATEIRALS WITH TUBULAR CELLS IN ALUMINIUM ALLOYS. TECHNICAL SPECIFICATION. GENERAL REQUIREMENTS.) |
| NF L19-101-2-1992 |
航空和航天.用鋁合金制的管形隔間器材.技術規范.六邊形管形件的特殊要求 |
(AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS IN ALUMINIUM ALLOYS. TECHNICAL SPECIFICATION. SPECIAL REQUIREMENTS FOR HEXAGONAL TUBULAR CELLS.) |
| NF L19-103-1992 |
航空航天系列.復合的非金屬熱固性塑料浸漬材料.帶管狀心的蜂窩材料.技術規格.一般要求 |
(AREROSPACE SERIES. COMPOSITE AND NON-METALLIC THERMOPLASTIC IMPREGNATED MATERIALS. HONEYCOM MATERIALS WITH TUBULAR CELLS. TECHNICAL SPECIFICATION. GENERAL REQUIREMENTS.) |
| NF L19-106-1995 |
航空航天系列.研磨用的管狀多孔材料.技術規范 |
(AEROSPACE SERIES. HONEYCOMB MATERIAL WITH TUBULAR CELLS FOR ABRADABLE APPLICATIONS. TECHNICAL SPECIFICATION.) |
| NF L20-010-1989 |
航空和航天.設備.NFE系列緊固件的選擇 |
(AEROSPACE SERIES. EQUIPMENT. CHOICE OF FASTENERS,NF E SERIES.) |
| NF L20-020-1989 |
航空和航天系列.鉚釘孔的尺寸 |
(AEROSPACE SERIES. HOLE SIZES FOR SOLID RIVETS. (EUROPEAN STANDARD EN 2309).) |
| NF L20-021-1995 |
航空航天系列.T型頭螺栓孔和夾子的設計標準 |
(AEROSPACE SERIES. HOLES AND TRAPS FOR T-HEAD BOLTS DESIGN STANDARD. (EUROPEAN STANDARD EN 3202).) |
| NF L20-026-1995 |
航空航天系列.插銷.尺寸和接頭選擇.設計標準 |
(Aerospace series. Spigots. Dimensions and fit selection. Design standard.) |
| NF L20-030-1996 |
航空航天系列.帶柄螺母.60度型鐵法蘭安裝孔.設計標準(歐洲標準EN 3149) |
(AEROSPACE SERIES. SHANK NUTS. INSTALLATION HOLES, 60 DEGREES SWAGE, FLANGES. DESIGN STANDARD. (EUROPEAN STANDARD EN 3149).) |
| NF L21-106-1975 |
鉚釘用鋁合金、鋼、耐熱不銹鋼合金線材.尺寸 |
(Wires for rivets in aluminium alloys, steel, stainless and heat resisting alloys. Dimensions.) |
| NF L21-107-1975 |
鉚釘用T40非合金鈦線材.尺寸 |
(WIRES FOR RIVETS IN T40 PURE TITANIUM. DIMENSIONS.) |
| NF L21-110-1975 |
鉚釘用 T４０非合金鈦線材.技術規范 |
(WIRES FOR RIVETS IN T40 PURE TITANIUM. TECHNICAL SPECIFICATION.) |
| NF L21-201-1972 |
鋁合金鉚釘.產品標準 |
(ALUMINIUM ALLOY RIVETS. PRODUCT STANDARD.) |
| NF L21-202-1976 |
T４０非合金鈦鉚釘.技術規范 |
(T40 PURE TITANIUM RIVETS. TECHNICAL SPECIFICATION.) |
| NF L21-203-1974 |
鋼鉚釘.不銹鋼和耐熱合金鉚釘.技術規范 |
(STEEL RIVETS. STAINLESS AND HEAT-RESISTING ALLOY RIVETS. TECHNICAL SPECIFICATION.) |
| NF L21-206-1967 |
航空工業用鉚釘.標準鉚釘標志 |
(RIVETS FOR THE AEROSPACE INDUSTRY. MARKING OF STANDARDIZED RIVETS.) |
| NF L21-208-1973 |
飛機表層埋頭鉚釘表面不平的公差 |
(FLUSH TOLERANCES OF COUNTERSUNK HEAD RIVETS WITH AIRCRAFT SURFACE COATING.) |
| NF L21-211-1980 |
鋁合金制半埋頭鉚釘(英寸) |
(MUSHROOM HEAD RIVETS IN ALUMINIUM ALLOYS. (RECH.).) |
| NF L21-212-1980 |
鋁合金制平頭鉚釘(英寸) |
(PAN HEAD RIVETS IN ALUMINIUM ALLOYS. (RECH.).) |
| NF L21-213-1980 |
鋁合金制１２０°埋頭鉚釘(英寸) |
(120 DEGREES COUNTERSUNK HEAD RIVETS IN ALUMINIUM ALLOYS. (RECH.).) |
| NF L21-214-1980 |
鋁合金制１２０°半埋頭鉚釘(英寸) |
(RAISED 120 DEGREES COUNTERSUNK HEAD RIVETS IN ALUMINIUM ALLOYS. (RECH.).) |
| NF L21-215-2000 |
緊固件.實心萬向頭鉚釘 |
(Fasteners - Rivets, solid, universal head.) |
| NF L21-216-1980 |
鋁合金制９０°埋頭鉚釘(英寸) |
(90 DEGREES COUNTERSUNK HEAD RIVETS IN ALUMINIUM ALLOYS. (RECH.).) |
| NF L21-217-1979 |
１００°埋頭鉚釘 |
(100 DEGREES COUNTERSUNK HEAD RIVETS.) |
| NF L21-218-1982 |
百分之百埋頭平圓頭鉚釘 |
(100 per cent countersunk flat button head rivets.) |
| NF L21-250-2000 |
緊固件.管形鉚釘 |
(Fasteners - Rivets, tubular.) |
| NF L21-260-1978 |
“SL“型帶30 NCD 16鋼制桿的組合鉚釘.技術規范 |
(“SL“ TYPE COMPOUND RIVET WITH 30 NCD 16 STEEL SHANK. TECHNICAL SPECIFICATION.) |
| NF L21-261-1982 |
“SL“型帶30 NCD16鋼制桿的標準型圓頭組合鉚釘 |
(“Sl“ type compound rivet with 30 ncd 16 steel shank. Cylindrical pan head. Standard type.) |
| NF L21-262-1982 |
“SL“型帶30 NCD 16鋼制桿的100°標準型埋頭組合鉚釘 |
(“Sl“ type compound rivet with 30 ncd 16 steel shank. 100 degrees countersunk head. Standard type.) |
| NF L21-263-1982 |
“SL“型帶30 NCD 16鋼制桿的T20型圓頭組合鉚釘 |
(“Sl“ type compound rivet with 30 ncd 16 steel shank. Cylindrical pan head. T 20 type.) |
| NF L21-264-1982 |
“SL“型帶30 NCD 16鋼制桿的 T20型100°埋頭組合鉚釘 |
(“Sl“ type compound rivet with 30 ncd 16 steel shank. 100 degrees countersunk head. T 20 type.) |
| NF L21-265-1982 |
“SL“型帶30 NCD 16鋼制桿的 T30型圓頭組合鉚釘 |
(“SL“ TYPE COMPOUND RIVET WITH 30 NCD 16 STEEL SHANK. CYLINDRICAL PAN HEAD. T 30 TYPE.) |
| NF L21-266-1982 |
“SL“型帶30 NCD 16鋼制桿的T30型100°埋頭組合鉚釘 |
(“SL“ TYPE COMPOUND RIVET WITH 30 NCD 16 STEEL SHANK. 100 DEGREES COUNTERSUNK HEAD. T 30 TYPE.) |
| NF L21-270-1981 |
“SL“型帶T-A6V鈦合金制桿組合鉚釘.技術規范 |
(“Sl“ type compound rivet with T-A6V titanium alloys. Technical specification.) |
| NF L21-271-2000 |
緊固件.緊公差T-A6V鈦合金桿并有2024鋁合金環的凸頭鎖緊螺栓 |
(Fasteners - Lockbolts, protruding head, with close tolerance and titanium alloy T-A6V shank and with collar in aluminium alloy 2024.) |
| NF L21-272-2000 |
緊固件.緊公差T-A6V鈦合金桿并有2024鋁合金環的100°埋頭鎖緊螺栓 |
(Fasteners - Lockbolts, 100 o countersunk head, with close tolerance and titanium alloy T-A6V shank and with collar in aluminium alloy 2024.) |
| NF L21-273-2000 |
緊固件.緊公差T-A６V鋁合金桿并有XC１０鋼環凸頭鎖緊螺栓 |
(Fasteners - Lockbolts, protruding head, with close tolerance and titanium alloy T-A6V shank and with collar in steel XC 10.) |
| NF L21-274-2000 |
緊固件.緊公差T-A６V鈦合金桿并有XC１０鋼環１００°埋頭鎖緊螺栓 |
(Fasteners - Lockbolts, 100 o countersunk head, with close tolerance and titanium alloy T-A6V shank and with collar in steel XC 10.) |
| NF L21-311-1993 |
航空航天系列.鉚釘,固體.通用頭,鋁1050A,英寸系列(EN 2143) |
(AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN ALUMINIUM 1050A, INCH BASED SERIES. (EUROPEAN STANDARD EN 2143).) |
| NF L21-312-1994 |
航空系列.根據EN 2115標準中鋁合金制一般頭形實心鉚釘 |
(AEROSPACES SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN ALUMINIUM ALLOY 2117. INCH BASED SERIES. (EUROPEAN STANDARD EN 2144).) |
| NF L21-313-1994 |
航空系列.根據EN 2115標準中陽極氧化處理鋁合金制一般頭形實心鉚釘 |
(AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN ALUMINIUM ALLOY 2117, ANODIZED OR CHROMATED. INCH BASED SERIES. (EUROPEAN STANDARD EN 2145).) |
| NF L21-314-1993 |
航空航天系列.鉚釘,固體.通用頭,鋁合金2017A,英寸系列(EN 2146) |
(AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN ALUMINIUM ALLOY 2017A, INCH BASED SERIES. (EUROPEAN STANDARD EN 2146).) |
| NF L21-316-1993 |
航空航天系列.鉚釘,固體.通用頭,鋁合金5056A,英寸系列(EN 2148) |
(AEROSPACES SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN ALUMINIUM ALLOY 5056A, INCH BASED SERIES. (EUROPEAN STANDARD EN 2148).) |
| NF L21-317-1996 |
航空系列.根據EN 2117標準中陽極氧化處理的鋁合金制一般頭形實心鉚釘 |
(Aerospace series. Rivets, solid, universal head, in aluminium alloy 5056A, anodized or chromated, inch based series.) |
| NF L21-321-1993 |
航空航天系列.鉚釘,固體,100級常規擴鉆頭,鋁1050A,英寸系列(EN 2550) |
(AEROSPACE SERIES. RIVETS, SOLID, 100 DEGREES NORMAL COUNTERSUNK HEAD, IN ALUMINIUM 1050A,INCH BASED SERIES. (EUROPEAN STANDARD EN 2550).) |
| NF L21-322-1993 |
航空航天系列.鉚釘,固體,100級常規有園頂?shù)臄U鉆頭,鋁合金2117A,英寸系列(EN 2551) |
(AEROSPACE SERIES. RIVETS, SOLID, 100 DEGREES NORMAL COUNTERSUNK HEAD WITH DOME, IN ALUMINIUM ALLOY 2117, INCH BASED SERIES. (EUROPEAN STANDARD EN 2551).) |
| NF L21-323-1993 |
航空系列.帶圓頂?shù)?鋁合金2177,陽極或鉻酸鹽處理的100級額定嵌入埋頭孔的頭,固體,鉚釘 |
(AEROSPACE SERIES. RIVETS, SOLID, 100 DEGREES NORMAL COUNTERSUNK HEAD WITH DOME, IN ALUMINIUM ALLOY 2117, ANODIZED OR CHROMATED, INCH BASED SERIES. (EUROPEAN STANDARD EN 2552).) |
| NF L21-324-1993 |
航空航天系列.鉚釘,固體,100級常規有園頂?shù)臄U鉆頭,鋁合金2017A,英寸系列(EN 2553) |
(AEROSPACE SERIES. RIVETS, SOLID, 100 DEGREES NORMAL COUNTERSUNK HEAD WITH DOME, IN ALUMINIUM ALLOY 2017A, INCH BASED SERIES. (EUROPEAN STANDARD EN 2553).) |
| NF L21-326-1993 |
航空航天系列.鉚釘,固體,100級常規有園頂?shù)臄U鉆頭,鋁合金5056A, 英寸系列(EN 2555) |
(AEROSPACE SERIES. RIVETS, SOLID, 100 DEGREES NORMAL COUNTERSUNK HEAD WITH DOME, IN ALUMINIUM ALLOY 5056A, INCH BASED SERIES. (EUROPEAN STANDARD EN 2555).) |
| NF L21-327-1993 |
航空航天系列.鉚釘,固體,100級常規有園頂?shù)臄U鉆頭,鋁合金5056A, 陽極氧化處理和鉻酸處理,英寸系列(EN 2556) |
(AEROSPACE SEREIS. RIVETS, SOLID, 100 DEGREES NORMAL COUNTERSUNK HEAD WITH DOME, IN ALUMINIUM ALLOY 5056A, ANODIZED OR CHROMATED, INCH BASED SERIES. (EUROPEAN STANDARD EN 2556).) |
| NF L21-411-1996 |
航空系列.耐蝕鋼FE-PA11制鈍化帶通用頭的全鉚釘.英制系列 |
(AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN CORROSION RESISTING STEEL FE-PA11, PASSIVATED, INCH BASED SERIES. (EUROPEAN STANDARD EN 3135).) |
| NF L21-412-1996 |
航空系列.耐蝕鋼FE-PA92HT制鈍化帶通用頭的全鉚釘.英制系列 |
(AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN CORROSION RESISTING STEEL FE-PA92HT, PASSIVATED, INCH BASED SERIES. (EUROPEAN STANDARD EN 3136).) |
| NF L21-414-1996 |
航空系列.耐高溫鎳基合金鋼NI-P11制鍍鎘帶通用頭的全鉚釘.英制系列 |
(AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P11, CADMIUM PLATED, INCH BASED SERIES. (EUROPEAN STANDARD EN 3141).) |
| NF L21-415-1996 |
航空系列.耐高溫鎳基合金鋼NI-P11制帶通用頭的全鉚釘.英制系列 |
(AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P11, INCH BASED SERIES. (EUROPEAN STANDARD EN 3142).) |
| NF L21-416-2001 |
航空航天系列.耐腐蝕鋼FE-PA2601制鈍化英制100度沉頭標稱凸頭的實心鉚釘 |
(Aerospace series - Rivets, solid, 100 o countersunk normal head with dome, in corrosion resisting steel FE-PA2601, passivated, inch based series.) |
| NF L21-417-2001 |
航空航天系列.耐腐蝕鋼FE-PA11制鈍化英制100度標稱沉頭的實心鉚釘 |
(Aerospace series - Rivets, solid, 100 o countersunk normal head, in corrosion resisting steel FE-PA11, passivated, inch based series.) |
| NF L21-418-2001 |
航空航天系列.耐腐蝕鋼FE-PA2601制鈍化英制100度標稱沉頭的實心鉚釘 |
(Aerospace series - Rivets, solid, 100 o countersunk normal head, in corrosion resisting steel FE-PA2601, passivated, inch based series.) |
| NF L21-421-1997 |
航空系列.T1-P02鈦制陽極處理英寸系列圓頂100度通用沉頭實心鉚釘 |
(AEROSPACE SERIES. RIVETS, SOLID, 100 DEGREES COUNTERSUNK NORMAL HEAD WITH DOME, IN TITANIUM TI-P02, ANODIZED, INCH BASED SERIES. (EUROPEAN STANDARD EN 3642).) |
| NF L21-422-1997 |
航空系列.T1-P02鈦制陽極處理英寸系列100度通用沉頭實心鉚釘 |
(AEROSPACE SERIES. RIVETS, SOLID, 100 DEGREES COUNTERSUNK NORMAL HEAD, IN TITANIUM TI-P02, ANODIZED, INCH BASED SERIES. (EUROPEAN STANDARD EN 3643).) |
| NF L21-423-1997 |
航空系列.T1-P02鈦制陽極處理英寸系列100度通用沉頭實心鉚釘 |
(AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN TITANIUM TI-P02, ANODIZED, INCH BASED SERIES. (EUROPEAN STANDARD EN 3644).) |
| NF L22-023-1967 |
飛行器緊固件標準一覽表.符合B.N.A.E.公差的ISO螺紋 |
(LIST OF STANDARDS FOR AIRCRAFT FASTENERS. ISO THREADS TO B.N.A.E. TOLERANCES.) |
| NF L22-024-1967 |
飛行器緊固件標準一覽表.符合ISO公差的ISO螺紋 |
(LIST OF STANDARDS FOR AIRCRAFT FASTENERS. ISO THREADS TO ISO TOLERANCES.) |
| NF L22-030-1966 |
飛行器緊固件.鋼號和機械特性.(RECH.) |
(AIRCRAFT FASTENERS. STEEL GRADES AND MECHANICAL PROPERTIES. (RECH.).) |
| NF L22-031-2003 |
緊固件.金屬材料的選擇 |
(Fasteners - Selection of metallic materials.) |
| NF L22-035-1966 |
飛行器緊固件.標志.(RECH.) |
(AIRCRAFT FASTENERS. MARKING. (RECH.).) |
| NF L22-040-1956 |
航空螺栓螺母.使用公差.國際單位制螺紋 |
(AIRCRAFT FASTENERS. MANUFACTURING TOLERANCES. (RECH.).) |
| NF L22-062-1966 |
用扳手操作的緊固件的ISO對邊 |
(ISO ACROSS FLATS FOR FASTENERS WITH SPANNER DRIVE.) |
| NF L22-063-1970 |
用板手操作的螺母、螺釘和軸的間隙 |
(CLEARANCE FOR WRENCHING NUTS,SCREWS AND PINS.) |
| NF L22-070-1976 |
螺釘?shù)腂NAE型十字槽 |
(CROSS RECESS (B.N.A.E.).) |
| NF L22-071-1976 |
NFL ２２-０７０ 型螺釘十字槽用螺絲刀頭 |
(SCREW-DRIVER END FOR CROSS RECESS ACCORDING TO NF L 22-070.) |
| NF L22-072-1991 |
航天建筑.螺絲.920型十字槽 |
(Aerospace construction. Bolts and screws. 92 degrees cruciform recess.) |
| NF L22-090-1966 |
修配用大直徑標準螺釘、銷和墊圈 |
(STANDARDIZED SCREWS,PINS AND WASHERS WITH INCREASED DIAMETER INTENDED FOR REPAIR WORK.) |
| NF L22-111-1975 |
無銷孔六角頭螺釘.國際單位制螺紋 |
(Hexagon head bolts without split pin hole. Sim thread (rech.).) |
| NF L22-112-1975 |
帶銷孔六角頭螺釘.國際單位制螺紋 |
(Hexagon head bolts with split pin hole. Sim thread (rech.).) |
| NF L22-121-1975 |
帶輕桿無鎖孔六角頭螺釘.國際單位制螺紋 |
(Hexagon head bolts with waisted shank without split pin hole. Sim thread (rech.).) |
| NF L22-122-1975 |
帶輕桿有銷孔六角頭螺釘.國際單位米制螺紋 |
(Hexagon head bolts with waisted shank with split pin hole. Sim thread.) |
| NF L22-125-1985 |
六角頭承拉螺釘ISO 螺紋４h 類 |
(Bolt, hexagonal head, for tensile application, . ISO thread 4H class.) |
| NF L22-126-1985 |
帶鎖緊孔六角頭承拉螺釘.ISO螺紋４h 類 |
(Bolt, hexagonal head, with locking hole, for tensile application. ISO thread 4H class.) |
| NF L22-127-1985 |
帶頸桿六角頭承拉螺釘.ISO螺 紋４h 類 |
(Bolt, hexagonal head, necked shank, for tensile application. ISO thread 4H class.) |
| NF L22-128-1985 |
帶頸桿有鎖緊孔六角頭承拉螺釘.ISO 螺紋４h 類 |
(Bolt, hexagonal head, necked shank, with locking hole, for tensile application. ISO thread 4H class.) |
| NF L22-129-1985 |
帶銷孔六角頭承拉螺釘.ISO 螺紋４h 類 |
(Bolt, hexagonal head, with split pin hole, for tensile application. ISO thread 4H class.) |
| NF L22-134-1975 |
無銷孔六角頭槽制螺釘.國際單位制螺紋 |
(Precision hexagon head bolts without split pin hole. Sim thread (rech.).) |
| NF L22-135-1975 |
帶銷孔六角頭槽制螺釘.國際單位制螺紋 |
(Precision hexagon head bolts with split pin hole. Sim thread (rech.).) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com