標準號 |
中文名稱 |
英文名稱 |
| NF T43-104-1994 |
生橡膠.揮發物質含量的測定 |
Rubbers, raw. Determination of volatile-matter content. |
| NF T43-105-1994 |
橡膠.灰份的測定 |
Rubber. Determination of ash. |
| NF T43-106-1990 |
天然生橡膠和天然橡膠膠乳.氮含量的測定 |
Rubber, raw natural, and rubber latex, natural. Determination of nitrogen content. |
| NF T43-107-1992 |
橡膠.原子吸收光譜法測定金屬含量.第4部分:錳含量的測定 |
Rubber. Determination of metal content by atomic absorption spectrometry. Part 4 : determination of manganese content. |
| NF T43-108-1992 |
橡膠.原子吸收光譜法測定金屬含量.第3部分:銅含量的測定 |
Rubber. Determination of metal content by atomic absorption spectrometry. Part 3 : determination of copper content. |
| NF T43-109-1996 |
橡膠.生天然橡膠.雜質含量的測定 |
Rubber. Raw natural rubber. Determination of dirt content. |
| NF T43-112-1994 |
天然生橡膠.顏色指標試驗 |
Rubber, raw natural. Colour index test. |
| NF T43-113-1980 |
橡膠.球狀天然橡膠.涂層定量.規范和測定 |
NATURAL RUBBER IN BALES. AMOUNT OF BALE COATING. SPECIFICATION AND DETERMINATION. |
| NF T43-117-1994 |
粗橡膠或硫化化合物.生坯強度測定 |
Raw rubber or unvulcanized compounds. Determination of green strength. |
| NF T45-001-1979 |
橡膠工業原料.二氧化鈦 |
RAW MATERIALS FOR THE RUBBER INDUSTRY. TITANIUM DIOXIDE. |
| NF T45-003-1983 |
橡膠工業原料.硫 |
Raw materials for the rubber industry. Sulphur. |
| NF T45-004-1979 |
橡膠工業原料.工業硬脂酸 |
RAW MATERIALS FOR THE RUBBER INDUSTRY. STEARIC ACID (TECHNICAL GRADE). |
| NF T45-005-1986 |
橡膠工業原料.粉狀天然碳酸鈣 |
Raw materials for the rubber industry. Naturel calcium carbonate powder. |
| NF T45-007-1987 |
橡膠工業原料.沉淀的氫氧化硅 |
Silica, precipitated, hydrated. |
| NF T45-008-1986 |
橡膠工業原料.高嶺土 |
Raw materials for the rubber industry. Kaolin. |
| NF T45-009-1972 |
橡膠工業原料.一氧化鉛 |
LITHARGE FOR THE RUBBER INDUSTRY. |
| NF T45-010-1972 |
橡膠工業原料.紅鉛粉 |
MINIUM FOR THE ELASTOMER INDUSTRY. |
| NF T45-011-1973 |
橡膠工業原料.石油增塑劑.成分的測定.折光度.密度 |
RAW MATERIALS FOR THE ELASTOMER INDUSTRY. PETROLEUM PLASTICISERS. DETERMINATION OF THE REFRACTION CONSTITUENT. DENSITY. |
| NF T45-012-1973 |
橡膠工業原料.石油增塑劑.成分的測定.密度.粘度 |
RAW MATERIALS FOR THE ELASTOMER INDUSTRY. PETROLEUM PLASTICISERS. DETERMINATION OF DENSITY-VISCOSITY. |
| NF T45-013-1975 |
橡膠工業原料.滑石粉 |
RAW MATERIALS FOR THE RUBBER INDUSTRY-TALC. |
| NF T45-014-1976 |
橡膠工業原料.石油增塑劑.試驗方法 |
RAW MATERIALS FOR THE RUBBER INDUSTRY. PETROLEUM PLASTIFIERS. TEST METHODS. |
| NF T45-015-1978 |
橡膠工業原料.再生橡膠.試驗方法 |
RAW MATERIALS FOR THE RUBBER INDUSTRY. RECLAIM RUBBER. METHODS OF TEST. |
| NF T45-016-1979 |
橡膠工業原料.主要混合型式的混合成分.包裝標記 |
RAW MATERIALS FOR THE RUBBER INDUSTRY COMPOUND INGREDIENTS IN THE FORM OF MASTER BATCHES. MARKING OF PACKAGES. |
| NF T45-018-2001 |
橡膠工業的生材料.化學產品.色散和主要混合物 |
Raw material for the rubber industry - Chemical products - Dispersions or principal mixtures. |
| NF T45-019-1983 |
橡膠工業原料.石臘 |
RAWMATERIALS FOR THE RUBBER INDUSTRY. PARAFFINS. |
| NF T45-020-1984 |
橡膠工業原料.人造原料.試驗方法 |
RAW MATERIALS FOR THE RUBBER INDUSTRY. FACTICE. METHODS OF TEST. |
| NF T45-021-1986 |
橡膠工業原料.0.5%-5%油浸氚化硫 |
RAW MATERIALS FOR THE RUBBER INDUSTRY. TRITURATED SULFER IMPREGNATED WITH 0,5 PER CENT TO 5 PER CENT OIL. |
| NF T45-022-1986 |
橡膠工業原料.鋁的氧化物.氫氧化鋁 |
RAW MATERIALS FOR THE RUBBER INDUSTRY. ALUMINIUM HYDROXIDE AL(OH)3. |
| NF T45-024-1988 |
橡膠工業原料.不溶解硫 |
RAW MATERIALS FOR THE RUBBER INDUSTRY. INSOLUBLE SULPHUR. |
| NF T45-027-1996 |
橡膠工業原料.SU亞磺酰胺型的加速劑試驗方法 |
Raw materials for the rubber industry. Sulfenamide type accelerators. Test methods. |
| NF T45-028-1996 |
橡膠混合物成分.對苯二胺型防護劑.試驗方法 |
RUBBER COMPOUNDING INGREDIENTS. PROTECTION AGENT, PARAPHENYLENEDIAMINE TYPE. TEST METHODS. |
| NF T45-029-1996 |
橡膠工業原料.有機過氧化物.分析方法 |
RAW MATERIALS FOR THE RUBBER INDUSTRY. ORGANIC PEROXIDES. METHOD ANALYSIS. |
| NF T45-030-1996 |
橡膠混合物成分.硫醇基苯并噻唑(MBT)和二硫化硫醇基苯并噻唑(MBTS)型加速劑.試驗方法 |
RUBBER COMPOUNDING INGREDIENTS. ACCELERATORS, MERCAPTOBENZOTHIAZOLE (MBT) AND MERCAPTOBENZOTHIAZYL DISULFIDE (MBTS) TYPE. TEST METHODS. |
| NF T45-101-2002 |
合成橡膠工業原料.碳黑詞匯 |
Raw materials for elastomer industry - Carbon black vocabulary. |
| NF T45-102-1991 |
合成橡膠工業用原料.炭黑取樣方法 |
Rubber compounding ingredients. Carbon black shipment sampling procedures. |
| NF T45-103-1992 |
橡膠工業用原料.炭黑.分類系統 |
Raw materials for the rubber industry. Carbon blacks. Classification system. |
| NF T45-105-1986 |
橡膠混合物成分.碳黑.標準碳黑 |
RUBBER COMPOUNDING INGREDIENTS. CARBON BLACK. STANDARD REFERENCE BLACKS. |
| NF T45-111-1987 |
橡膠混合物成分.炭黑.碘吸附值測定.滴定法 |
Rubber compounding ingredients. Carbon black. Determination of iodine adsorption number. Titrimetric method. |
| NF T45-112-1996 |
橡膠混合物成分.碳黑.染色強度的測定 |
Rubber compounding ingredients. Carbon black. Determination of tinting strength. |
| NF T45-114-1989 |
橡膠工業原料.與碳黑結合的橡膠的測定 |
RAW MATERIALS FOR THE RUBBER INDUSTRY. DETERMINATION OF THE RUBBER BOUND WITH CARBON BLACK. |
| NF T45-122-1994 |
橡膠配方配合劑.炭黑.鄰苯二甲酸二丁酯吸收系數的測定.第1部分:吸收計法 |
Rubber compounding ingredients. Carbon black. Determination of dibutyl phtalate absorption number. Part 1 : method using absorptometer. |
| NF T45-131-1996 |
橡膠混合物成分.炭黑.熱損失的測定 |
Rubber compounding ingredients. Carbon black. Determination of loss on heating. |
| NF T45-132-1996 |
橡膠混合物成分.碳黑.灰分測定 |
RUBBER COMPOUNDING INGREDIENTS. CARBON BLACK. DETERMINATION OF THE ASH CONTENT. |
| NF T45-133-1990 |
橡膠工業用原料.炭墨中總硫含量的測定 |
(RAW MATERIALS FOR THE RUBBER INDUSTRY. DETERMINATION OF THE TOTAL SULPHUR CONTENT OF CARBON BLACK.) |
| NF T45-134-1991 |
橡膠工業原料.篩渣量的測定 |
(RAW MATERIALS FOR THE ELASTOMER INDUSTRY. CARBON BLACK. DETERMINATION OF THE SIEVE RESIDUE.) |
| NF T45-135-1989 |
橡膠工業原料.在105-950℃之間熱損耗的測定 |
(RAW MATERIALS FOR THE RUBBER INDUSTRY. DETERMINATION OF THE LOSS ON HEATING OF CARBON BLACK BETWEEN 105 DEGREES C (OR 125 DEGREES C) AND 950 DEGREES C.) |
| NF T45-136-1992 |
橡膠工業用原料.炭黑.溶劑可萃取原料的測定 |
(Raw material for the rubber industry. Carbon black. Determination of solvent extractable material.) |
| NF T45-138-1-1993 |
橡膠配合材料.炭黑.甲苯提煉的透光率的測定.第1部分:快速法 |
(RUBBER COMPOUNDING INGREDIENTS. CARBON BLACK. DETERMINATION OF LIGHT TRANSMITTANCE OF TOLUENCE EXTRACT. PART 1 : RAPID METHOD.) |
| NF T45-138-2-1993 |
橡膠配方配合劑.炭黑.甲苯萃取物透光率的測定.第2部分:產品評定法 |
(RUBBER COMPOUDING INGREDIENTS. CARBON BLACK. DETERMINATION OF LIGHT TRANSMITTANCE OF TOLUENE EXTRACT. PART 2 : METHOD FOR PRODUCT EVALUATION.) |
| NF T45-152-1991 |
橡膠混合物的成份.炭黑(顆粒).細料成分的測定 |
(Rubber compounding ingredients. Carbon black (pelletized). Determination of fines content.) |
| NF T45-153-1988 |
橡膠混合物.碳黑顆粒尺寸分布的測定 |
(Rubber compounding ingredients. Carbon black. Determination of pellet size distribution.) |
| NF T45-172-1994 |
橡膠工業原料.炭黑.丁二烯苯乙烯橡膠混合物中炭黑質量的評定 |
Raw materials for the rubber industry. Carbon black. Evaluation of the quality of the carbon black in a styrene-butadiene based mixture. |
| NF T46-001-1975 |
物理和化學試驗用硫化橡膠試樣的制備 |
Preparation of vulcanized rubber test pieces for physical and chemical tests. |
| NF T46-002-1988 |
硫化橡膠或熱塑橡膠.拉力試驗 |
VULCANIZED OR THERMOPLASTIC RUBBER. TENSILE TEST. |
| NF T46-003-1973 |
橡膠和合成橡膠.硫化橡膠國際硬度試驗 |
INTERNATIONAL HARDNESS OF VULCANIZED RUBBERS (30-94 IRHD). |
| NF T46-004-1985 |
硫化橡膠或熱塑橡膠.抗老化和抗熱能力的測定.干燥器試驗 |
Vulcanized or thermoplastic rubber. Accelerated ageing or heat resistance determination forced air oven test. |
| NF T46-007-1978 |
硫化橡膠.抗撕裂強度的測定(帶切口或不帶切口的角形或月牙形試樣) |
VULCANIZED RUBBERS. DETERMINATION OF TEAR STRENGH (ANGLE TEAR TEST PIECE WITH OR WITHOUT NICK AND CRESCENT TEST PIECE). |
| NF T46-009-1973 |
標準溫度的高溫恒定伸長后塑性變形試驗 |
DETERMINATION OF TENSION SET UNDER CONSTANT ELONGATION OF VULCANIZED ELASTOMERS AT NORMAL AND ELEVATED TEMPERATURES. |
| NF T46-012-1984 |
硫化橡膠或熱塑橡膠.轉動卷筒的耐磨損性能的測定 |
VULCANIZED OR THERMOPLASTIC RUBBER. DETERMINATION OF ABRASION RESISTANCE USING A ROTATING CYLINDRICAL DRUM DEVICE. |
| NF T46-015-1987 |
硫化橡膠.耐抗裂性的測定（De mattia） |
Vulcanized rubber. Determination of the resistance to flex craking (de mattia). |
| NF T46-016-1987 |
硫化橡膠.裂縫增生的測定（De mattia） |
Vulcanized rubber. Determination of the resistance to crack propagation (de mattia). |
| NF T46-018-1971 |
橡膠.硫化合成橡膠不脆化極限溫度的測定 |
DETERMINATION FOR TEMPERATURE LIMIT OF BRITTLENESS FOR VULCANIZED RUBBERS. |
| NF T46-019-1992 |
硫化或熱塑橡膠.抗臭氧開裂.靜態變形試驗 |
Vulcanized or thermoplastic rubber. Resistance to ozone cracking. Static elongation test. |
| NF T46-020-1971 |
橡膠.四倍剪力試驗器測定硫化合成橡膠在剛性板上的附著力 |
DETERMINATION OF ADHESION OF VULCANIZED RUBBERS TO RIGID PLATES IN SHEAR (BONDED QUADRUPLE SHEAR TEST PIECE). |
| NF T46-021-1973 |
橡膠.用反復抗伸作動力疲勞試驗 |
RUBBER AND SIMILAR ELASTOMERS. DYNAMIC FATIGUE TEST BY REPEATED TENSILE STRESSES. |
| NF T46-022-1970 |
橡膠和類似合成橡膠.硫化橡膠基產品的儲存條件 |
Rubber and similar elastomers. Storage conditions for vulcanized rubber based products. |
| NF T46-023-1971 |
橡膠.四倍剪力試驗器測定硫化合成橡膠剪切模數 |
DETERMINATION OF MODULUS IN SHEAR OF VULCANIZED RUBBERS (BONDED QUADRUPLE SHEAR TEST PIECE). |
| NF T46-025-1981 |
橡膠.低溫下橡膠硬度的測定.(日曼GEHMAN試驗) |
Rubber. Determination of stiffness of vulcanized rubber (cehemann test). |
| NF T46-026-1984 |
硫化橡膠或熱塑橡膠.動力試驗 |
Vulcanized or thermoplastic rubber. Dynamic tests. |
| NF T46-027-1976 |
橡膠.以硬度試驗測定結晶作用 |
RUBBERS. DETERMINATION OF CRYSTALLIZATION EFFECTS BY HARDNESS TEST. |
| NF T46-028-1976 |
橡膠.硫化橡膠低硬度（10-35D.I.D.C.）的國際硬度試驗 |
VULCANIZED RUBBERS OF LOW HARDNESS (10 TO 35 IRHD). DETERMINATION OF HARDNESS. |
| NF T46-029-1976 |
橡膠.硫化橡膠高硬度（85-100D.I.D.C.）的國際硬度試驗 |
VULCANIZED RUBBERS OF HIGH HARDNESS (85 TO 100 IRHD). DETERMINATION OF HARDNESS. |
| NF T46-030-1977 |
橡膠.硫化橡膠密度的測定 |
VULCANIZED RUBBERS-DETERMINATION OF DENSITY. |
| NF T46-031-1979 |
硫化橡膠.測定各種有機物質對硫化橡膠污染的試驗方法 |
RUBBER,VULCANIZED. METHODS OF TEST FOR STAINING IN CONTACT WITH VARIOUS ORGANIC MATERIALS. |
| NF T46-032-1977 |
橡膠.硫化橡膠低溫性能的測定.溫度收縮法（TR試驗） |
VULCANIZED RUBBER.DETERMINATION OF LOW TEMPERATURE CHARACTERISTICS TEMPERATURE-RETRACTION PROCEDURE(TR TEST). |
| NF T46-033-1977 |
橡膠.硫化橡膠小試樣抗裂強度的測定（DELFT試驗） |
VULCANIZED RUBBERS-DETERMINATION OF TEARSTRENGTH OF SMALL TEST PIECES(DELFT TEST PIECES). |
| NF T46-034-1978 |
硫化橡膠.透氣性的測定.恒壓法 |
RUBBER VULCANIZED. DETERMINATION OF PERMEABILITY CONSTANT PRESSURE METHOD TO GASES. |
| NF T46-036-1978 |
橡膠.強性和回強性的測定.LVPKE擺錘法 |
RUBBERS. DETERMINATION OF REBOUND RESILIENCE LUEPKE PENDULUM METHOD. |
| NF T46-037-1979 |
硫化橡膠.透氣性的測定.等容法 |
RUBBER,VULCANIZED. DETERMINATION OF PERMEABILITY TO GASES. CONSTANT VOLUME METHOD. |
| NF T46-038-1995 |
硫化或熱塑橡膠.抗臭氧開裂.實驗室試驗室中臭氧濃度測定用參考法和選擇法 |
Rubber vulcanized of thermoplastic. Resistance to ozone cracking. Reference and alternative methods for determining ozone concentration in laboratory test chambers. |
| NF T46-039-1992 |
硫化或熱塑橡膠.抗臭氧開裂.動態變形試驗 |
Vulcanized or thermoplastic rubber. Resistance to ozone cracking. Dynamic deformation test. |
| NF T46-043-1983 |
硫化橡膠.正常溫度和高溫下擠壓力消除的測定（環狀試件） |
VULCANIZED RUBBER. DETERMINATION OF COMPRESSION STRESS RELAXATION AT NORMAL AND ELEVATED TEMPERATURES (ANNULAR TEST-PIECES). |
| NF T46-044-1983 |
硫化橡膠.正常溫度和高溫下壓擠應力消除的測定（圓柱形試件） |
VULCANIZED RUBBER. DETERMINATION OF COMPRESSION STRESS RELAXATION AT NORMAL AND ELEVATED TEMPERATURES (CYLINDRICAL TEST-PIECES). |
| NF T46-045-1986 |
硫化橡膠.撓度計測定壓擠時抗疲勞強度和升高溫度 |
RUBBER VULCANIZED. DETERMINATION OF TEMPERATURE RISE AND RESISTANCE TO FATIGUE IN COMPRESSION FLEXOMETER TESTING. |
| NF T46-047-2002 |
橡膠和橡膠產品.熱量分析法測定硫化和未硫化化合物的組分 |
Rubber and rubber products - Determination of composition of vulcanizates and uncured compounds by thermogravimetry. |
| NF T46-048-1984 |
硫化橡膠或熱塑橡膠.試樣和試驗產品尺寸的測定 |
Rubber vulcanized or thermoplastic. Determination of dimensions of test pieces and products for test purposes. |
| NF T46-049-1987 |
硫化橡膠.對紡織線繩靜態粘附力的測定.H形拉伸試驗 |
RUBBER VULCANISED. DETERMINATION OF STATIC ADHESION TO TEXTILE CORD. H-PULL TEST. |
| NF T46-052-1988 |
硫化橡膠或熱塑橡膠.SHORE型袋式硬度計測定硬度 |
VULCANIZED OR THERMOPLASTIC RUBBER. DETERMINATION OF IDENTATION HARDNESS BY MEANS OF TYPE SHORE POCKET HARDNESS METERS. |
| NF T46-053-2003 |
橡膠.識別.熱解氣相色譜法.質譜探測 |
Rubber - Identification - Pyrolytic gas and chromatographic method - Mass spectrometry detection. |
| NF T46-054-1991 |
橡膠.鑒別.紅外線光譜測定法 |
RUBBER. IDENTIFICATION. INFRA-RED SPECTROMETRIC METHOD. |
| NF T46-055-1990 |
硫化或熱塑橡膠.從紡織物粘合性和抗撕裂強度的測定中取得的痕量多峰值的分析 |
VULCANIZED OR THERMOPLASTIC RUBBER. ANALYSIS OF THE MULTIPEAK TRACES OBTAINED WHEN DETERMINING THE ADHESIVE STRENGTH AND THE TEAR STRENGTH. |
| NF T46-057-1989 |
硫化橡膠.壓縮或剪切蠕變的測定 |
RUBBER,VULCANIZED. DETERMINATION OF CREEP IN COMPRESSION OR SHEAR. |
| NF T46-058-1988 |
硫化橡膠.金屬粘附測定.單片試驗 |
RUBBER,VULCANIZED. DETERMINATION OF ADHESION TO METAL. ONE-PLATE METHOD. |
| NF T46-059-1988 |
硫化橡膠.金屬粘附測定.兩片試驗 |
RUBBER,VULCANIZED. DETERMINATION OF ADHESION TO METAL. TWO-PLATE METHOD. |
| NF T46-100-1979 |
橡膠.溶劑提取物的測定 |
RUBBER. DETERMINATION OF SOLVENT EXTRACT. |
| NF T46-104-1968 |
橡膠.高溫分解法測定合成橡膠混合物中碳黑的含量 |
RUBBER AND SIMILAR ELASTOMERS. PYROLYTIC DETERMINATION OF CARBON BLACK OF ELASTOMER BASED COMPOUNDS. |
| NF T46-900-1975 |
橡膠和類似合成橡膠.工業用硫化橡膠均質廢料的選擇 |
RUBBER AND SIMILAR ELASTOMERS - SELECTION OF HOMOGENEOUS WASTE FROM INDUSTRIAL VULCANIZED RUBBER. |
| NF T47-001-1971 |
橡膠.合成橡膠和硬橡膠模制和壓制品公差 |
Tolerances applicables to moulded and extruded products of rubber or ebonite. |
| NF T47-002-1992 |
輸送帶.取樣 |
Conveyor belts. Sampling. |
| NF T47-003-1980 |
傳送帶.貯存和裝卸指南 |
CONVEYOR BELTS. GUIDE TO STORAGE AND HANDLING. |
| NF T47-007-1991 |
傳送帶.涂層特性.分類 |
CONVEYOR BELTS. CHARACTERISTICS OF COVERS. CLASSIFICATION. |
| NF T47-010-1987 |
輸送帶.ISO 等義術語一覽表 |
CONVEYOR BELTS. ISO LIST OF EQUIVALENT TERMS. |
| NF T47-100-1-1988 |
傳送帶.尺寸.寬度和長度 |
CONVEYOR BELTS. DIMENSIONS. WIDTHS AND LENGTHS. |
| NF T47-100-3-2001 |
鋼芯傳輸帶.總厚度和蓋層厚度的測定方法 |
Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness. |
| NF T47-100-4-2000 |
織物框架傳送帶.總厚度和件厚度.第1部分:試驗方法 |
Conveyor belts with a textile carcass - Total thickness and thickness of elements - Part 1 : methods of test. |
| NF T47-102-1-2000 |
織物傳送帶.全厚度拉伸試驗.第1部分:拉伸強度、斷裂伸長率和標準負荷下伸長率的測定 |
Textile conveyor belts - Full thickness tensile testing - Part 1 : determination of tensile strength, elongation at break and elongation at the reference load. |
| NF T47-106-1988 |
合成纖維骨架輸送帶.抗張強度和伸長率.規范和試驗方法 |
CONVEYOR BELTS WITH ARAMIDE CARCASSE. TENSILE STRENGTH AND ELONGATIONS. SPECIFICATIONS AND METHODS OF TEST. |
| NF T47-108-1993 |
傳送帶.抗燃燒強度.規范和試驗方法 |
Conveyor belts. Flame retardation. Specifications and test method. |
| NF T47-110-1-1987 |
傳送帶.耐熱性.試驗方法 |
Conveyor belts. Heat resistance. Test method. |
| NF T47-110-2-1987 |
傳送帶.耐熱性能.規范 |
CONVEYOR BELTS. HEAT RESISTANCE. SPECIFICATIONS. |
| NF T47-114-1999 |
傳送帶.滾筒磨擦測試 |
CONVEYOR BELTS. DRUM FRICTION TESTING. (EUROPEAN STANDARD EN 1554). |
| NF T47-116-2002 |
一般用途輸送帶.電氣和可燃性安全要求 |
Conveyor belts for general purpose use - Electrical and flammability safety requirements. |
| NF T47-119-1991 |
傳送帶.標記 |
Conveyor belts. Marking. |
| NF T47-126-1983 |
傳送帶.耐裂紋擴大的強度（試驗方法） |
CONVEYOR BELTS. TEAR PROPAGATION RESISTANCE OF THE CARCASS (METHOD OF TEST). |
| NF T47-131-2002 |
輸送機皮帶.機械緊固件的強度測定.靜態試驗法 |
Conveyor belts - Determination of strength of mechanical fastenings - Static test method. |
| NF T47-135-1997 |
橡膠,塑料軟管和軟管組件.電阻的測定 |
Rubber and plastics hoses and hose assemblies. Determination of electrical resistance. |
| NF T47-150-1997 |
輕型運輸機皮帶.主要特性和應用 |
LIGHT CONVEYOR BELTS. PRINCIPAL CHARACTERISTICS AND APPLICATIONS. (EUROPEAN STANDARD EN 873). |
| NF T47-153-1999 |
輕型運輸機皮帶.摩擦系數測定的試驗方法 |
LIGHT CONVEYOR BELTS. TEST METHOD FOR THE DETERMINATION OF THE COEFFICIENT OF FRICTION. (EUROPEAN STANDARD EN 1724). |
| NF T47-155-1999 |
輕型運輸機皮帶.電阻測量的試驗方法 |
LIGHT CONVEYOR BELTS. TEST METHODS FOR THE MEASUREMENT OF THE ELECTRICAL RESISTANCES. (EUROPEAN STANDARD EN 1637). |
| NF T47-157-1999 |
輕型運輸機皮帶.運行輕型運輸機皮帶產生的靜電場的測量試驗方法 |
LIGHT CONVEYOR BELTS. TEST METHOD FOR THE MEASUREMENT OF THE ELECTROSTATIC FIELD GENERATED BY A RUNNING LIGHT CONVEYOR BELT. (EUROPEAN STANDARD EN 1718). |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com