標準號 |
中文名稱 |
英文名稱 |
| NF P18-437-1999 |
新鮮混凝土測試.第1部分:取樣 |
(Testing fresh concrete - Part 1 : sampling.) |
| NF P18-438-2001 |
硬化混凝土試驗.第2部分:強度試驗用樣品的制備和養護 |
(Testing hardened concrete - Part 2 : making and curing specimens for strength tests.) |
| NF P18-441-2000 |
硬化混凝土試驗.第4部分:抗壓強度.試驗機規范 |
(Testing hardened concrete - Part 4 : compressive strength - Specification for testing machines.) |
| NF P18-443-2001 |
試驗新鮮混凝土.第7部分:空氣含量.壓力方法 |
(Testing fresh concrete - Part 7 : air content - Pressure methods.) |
| NF P18-444-2000 |
結構中的試驗混凝土.第1部分:芯樣本.壓縮時的取樣,檢驗和試驗 |
(Testing concrete in structures - Part 1 : cored specimens - Taking, examining and testing in compression.) |
| NF P18-445-2003 |
結構中的混凝土試驗.第2部分:無損檢驗.回彈數的測定 |
(Testing concrete in structures - Part 2 : non-destructive testing - Determination of rebound number.) |
| NF P18-451-1981 |
混凝土.塌陷試驗 |
(Concrete. Slump test.) |
| NF P18-452-1988 |
混凝土.和易性測量計測定混凝土流動時間 |
(CONCRETES. MEASURING THE FLOW TIME OF CONCRETES AND MORTARS USING A WORKABILITYMETER.) |
| NF P18-455-2003 |
硬化混凝土試驗.第3部分:試樣的壓縮強度 |
(Testing hardened concrete - Part 3 : compressive strength of test specimens.) |
| NF P18-500-1995 |
混凝土.沙型混凝土 |
(Concrete. Sand concrete.) |
| NF P18-501-1992 |
水硬性混凝土添加劑.填縫料 |
(ADDITIONS FOR CONCRETE. FILLERS.) |
| NF P18-502-1992 |
混凝土添加劑.硅霧 |
(ADDITIONS FOR CONCRETE. SILICA FUMES.) |
| NF P18-506-1992 |
水硬性混凝土添加劑.細磨碎的玻璃狀渣.爐 |
(ADDITIONS FOR CONCRETE. GROUND GLASSY BLASTFURNACE SIAG.) |
| NF P18-507-1992 |
混凝土摻和料.水分保持.用“CONEDE DE MARSH“噴涌測量流動性的方法 |
(ADDITIONS FOR CONCRETE. WATER RETENTION. METHOD FOR MEASUREMENT OF FLUIDITY BY FLOWING WITH THE “CONE DE MARSH“.) |
| NF P18-508-1995 |
水硬性混凝土添加劑.石灰石填加劑.規范 |
(ADDITIONS FOR CONCRETE. LIMESTONE ADDITIONS. SPECIFICATIONS AND CONFORMITY CRITERIA.) |
| NF P18-509-1998 |
混凝土粘接劑.硅質添加劑.規范和一致性標準 |
(ADDITIONS FOR CONCRETE. SILICEOUS ADDITIONS. SPECIFICATIONS AND CONFORMITY CRITERIA.) |
| NF P18-601-2003 |
混凝土用集料 |
(Aggregates for concrete.) |
| NF P18-602-2003 |
瀝青混合物以及道路、飛機場和其他交通區域表面處理用集料 |
(Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas.) |
| NF P18-603-1-2002 |
輕集料.第1部分:混凝土、砂漿和灰漿用輕集料 |
(Lightweight aggregates - Part 1 : lightweight aggregates for concrete, mortar, and grout.) |
| NF P18-621-1-1996 |
集料總特征的試驗.第1部分:抽樣方法 |
(TESTS FOR GENERAL PROPERTIES OF AGGREGATES. PART 1 : METHODS FOR SAMPLING. (EUROPEAN STANDARD EN 932-1).) |
| NF P18-621-2-1999 |
集料一般特性的試驗.第2部分:實驗室樣品還原法 |
(Tests for general properties of aggregates. Part 2 : methods for reducing laboratory samples.) |
| NF P18-621-3-1996 |
集料總特征的試驗.第3部分:簡化的巖相描述過程和術語 |
(TESTS FOR GENERAL PROPERTIES OF AGGREGATES. PART 3 : PROCEDURE AND TERMINOLOGY FOR SIMPLIFIED PETROGRAPHIC DESCRIPTION. (EUROPEAN STANDARD EN 932-3).) |
| NF P18-621-5-2000 |
集料的一般特性試驗.第5部分:通用設備和校準 |
(Tests for general properties of aggregates - Part 5 : common equipment and calibration.) |
| NF P18-621-6-1999 |
集料一般特性的試驗.第6部分:復驗性和再生性定義 |
(Tests for general properties of aggregates. Part 6 : definitions of repeatability and reproducibility.) |
| NF P18-622-1-1997 |
集料幾何特性的試驗.第1部分:粒徑分布 |
(TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES. PART 1 : DETERMINATION OF PARTICLE SIZE DISTRIBUTION. SIEVING METHOD. (EUROPEAN STANDARD EN 933-1).) |
| NF P18-622-10-2002 |
集料的幾何性能試驗.第10部分:細粒評定.填料的分級(噴氣篩) |
(Tests for geometrical properties of aggregates - Part 10 : assessment of fines - Grading of fillers (air jet sieving).) |
| NF P18-622-2-1996 |
巖石粒度幾何性能的檢驗方法.第2部分:粒度分布測定.篩分振動分析.篩孔公稱尺寸 |
(Tests for geometrical properties of aggregates. Part 2 : determination of particle size distribution. Test sieves, nominal size of apertures.) |
| NF P18-622-3-1997 |
集料幾何特性的試驗.第3部分:顆粒形狀的測定.側面指數 |
(TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES. PART 3 : DETERMINATION OF PARCICLE SHAPE. FLAKINESS INDEX. (EUROPEAN STANDARD EN 933-3).) |
| NF P18-622-4-2000 |
集料的幾何特性試驗.第4部分:粒子形狀測定.形狀系數 |
(Tests for geometrical properties of aggregates - Part 4 : determination of particle shape - Shape index.) |
| NF P18-622-5-1998 |
集料幾何特性的試驗.第5部分:粗集料顆粒表面碎裂百分比的測定 |
(TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES. PART 5 : DETERMINATION OF PERCENTAGE OF CRUSHED AND BROKEN SURFACES IN COARSE AGGREGATE PARTICLES. (EUROPEAN STANDARD EN 933-5).) |
| NF P18-622-6-2002 |
集料幾何特性的試驗.第6部分:顆粒形狀的測定.片層分裂指數 |
(Test for geometrical properties of aggregates - Part 6 : assessment of surface characteristics - Flow coefficient of aggegates.) |
| NF P18-622-7-1998 |
集合體的幾何特性的試驗.第7部分:殼含量和測定.粗集合體中殼的百分比 |
(TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES. PART 7 : DETERMINATION OF SHELL CONTENT. PERCENTAGE OF SHELLS IN COARSE AGGREGATES. (EUROPEAN STANDARD EN 933-7).) |
| NF P18-622-8-1999 |
集料地理特性試驗.第8部分:完整性評估,沙等效試驗.(EN 933-8) |
(TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES. PART 8 : ASSESSMENT OF FINES. SAND EQUIVALENT TEST. (EUROPEAN STANDARD EN 933-8).) |
| NF P18-622-9-1999 |
集料幾何特性的試驗.第9部分:細集料的評估.次甲基藍試驗 |
(Tests for geometrical properties of aggregates. Part 9 : assessment of fines. Methylene blue test.) |
| NF P18-650-1-1996 |
集料的機械和物理性能試驗.第1部分:耐磨性測定 |
(TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES. PART 1 : DETERMINATION OF THE RESISTANCE TO WEAR (MICRO-DEVAL). (EUROPEAN STANDARD EN 1097-1).) |
| NF P18-650-2-1998 |
集料的機械和物理性能試驗.第2部分:抗破裂性能的測定方法 |
(TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES. PART 2 : METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION. (EUROPEAN STANDARD EN 1097-2).) |
| NF P18-650-3-1998 |
集合體機械和物理特性試驗.第3部分:松散塊密度和砂眼的測定 |
(TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES. PART 3 : DETERMINATION OF LOOSE BULK DENSITY AND VOIDS. (EUROPEAN STANDARD EN 1097-3).) |
| NF P18-650-4-2000 |
集料的機械和物理性能試驗.第4部分:測定壓縮烘干后填充料空隙 |
(Tests for mechanical and physical properties of aggregates - Part 4 : determination of the voids of dry compacted filler.) |
| NF P18-650-6-2001 |
原巖顆粒的機械和物理性能的試驗.第6部分:顆粒密度和吸水率的測定 |
(Tests for mechanical and physical properties of aggregates - Part 6 : determination of particle density and water absorption.) |
| NF P18-650-7-1999 |
集料的物理和機械特性試驗.第7部分:填充物的顆粒密度的測定.比重瓶方法 |
(Tests for mechanical and physical properties of aggregates - Part 7 : determination of the particle density of filler - Pyknometer method.) |
| NF P18-650-8-2000 |
集料的機械和物理性能試驗.第8部分:測定拋光石尺寸 |
(Tests for mechanical and physical properties of aggregates - Part 8 : determination of the polished stone value.) |
| NF P18-650-9-1998 |
集料的機械和物理性能試驗.第9部分:通過防滑釘胎磨擦測定耐磨性.NORDIC試驗 |
(Tests for mechanical and physical properties of aggregates. Part 9 : determination of the resistance to wear by abrasion from studded tyres. Nordic test.) |
| NF P18-653-1-2000 |
集料的熱性能和氣候老化性能試驗.第1部分:耐凍性和耐解凍性測定 |
(Test for thermal and weathering properties of aggregates - Part 1 : determination of resistance to freezing and thawing.) |
| NF P18-653-2-1998 |
集料的熱性能和老化性能試驗.第2部分:硫酸鎂試驗 |
(Tests for thermal and weathering properties of aggregates. Part 2 : magnesium sulfate test.) |
| NF P18-653-3-2002 |
集料的風化特性和熱特性試驗.第3部分:玄武巖的煮沸試驗 |
(Tests for thermal and weathering properties of aggregates - Part 3 : boiling test for “Sonnenbrand basalt“.) |
| NF P18-653-4-1998 |
集料的熱性能和老化性能試驗.第4部分:干縮率測定 |
(TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES. PART 4 : DETERMINATION OF DRYING SHRINKAGE. (EUROPEAN STANDARD EN 1367-4).) |
| NF P18-653-5-2003 |
集料的熱性能和老化性能試驗.第4部分:耐熱沖擊性測定 |
(Tests for thermal and weathering properties of aggregates - Part 5 : determination of resistance to thermal shock.) |
| NF P18-660-1-1998 |
集料的化學特性的試驗.第1部分:化學分析 |
(Tests for chemical properties of aggregates. Part 1 : chemical analysis.) |
| NF P18-660-3-2002 |
集料化學性能的試驗.第3部分:用集料濾取法制備提取物 |
(Tests for chemical properties of aggregates - Part 3 : preparation of eluates by leaching of aggregates.) |
| NF P18-661-1-2003 |
鋼筋石.第1部分:規范 |
(Armourstone - Part 1 : specification.) |
| NF P18-661-2-2003 |
鋼筋石.第2部分:試驗方法 |
(Armourstone - Part 2 : test methods.) |
| NF P18-670-2003 |
鐵道路基用集料 |
(Aggregates for railway ballast.) |
| NF P18-806-1989 |
水硬性混凝土建筑用的特殊產品.粘結料產品或合成樹脂基產品.灰末粒度尺寸的分析 |
(SPECIAL PRODUCTS FOR HYDRAULIC CONCRETE CONSTRUCTIONS. BINDER- OR SINTHETIC RESIN BASED PRODUCTS. PARTICLE SIZE ANALYSIS OF POWDERS.) |
| NF P18-807-1989 |
水硬性混凝土建筑用的特殊產品.合成樹脂或水凝基制品.+450℃時燒失和+950℃灰份含量 |
(SPECIAL PRODUCTS FOR HYDRAULIC CONCRETE CONSTRUCTIONS. SYNTHETIC RESIN OR HYDRAULIC BINDER BASED PRODUCTS. FIRE LOSS AT + 450 DEGREES CELSIUS AND ASH CONTENT AT + 950 DEGREES CELSIUS.) |
| NF P18-810-1989 |
水硬性混凝土建筑用的特殊產品.合成樹脂基產品.使用期限的確定 |
(SPECIAL PRODUCTS FOR HYDRAULIC CONCRETE CONSTRUCTIONS. SYNTHETIC RESIN BASED PRODUCTS. DETERMINATION OF USUAL PRACTICE TIME.) |
| NF P18-874-1989 |
水硬性混凝土建筑用的特殊產品.粘結兩塊混凝土的產品.最大粘合時間的試驗 |
(SPECIAL PRODUCTS FOR HYDRAULIC CONCRETE CONSTRUCTIONS. PRODUCTS FOR MAKING STRUCTURAL JOINTS BETWEEN TWO CONCRETE ELEMENTS. TEST FOR DETERMINING THE MAXIMUM ASSEMBLY TIME.) |
| NF P18-901-1-1998 |
混凝土結構的修復和保護用產品和系統.定義、要求、質量控制和合格評定.第1部分:定義 |
(Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity. Part 1 : definitions.) |
| NF P18-921-1-2002 |
混凝土結構的防護和維修用產品和系統.粒度分析.第1部分:預混合泥漿干組分的試驗方法 |
(Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 1 : Test method for dry components of premixed mortar.) |
| NF P18-921-2-1999 |
混凝土結構的保護和修復產品和系統.粒度分析.第2部分:聚合物粘結劑填充試驗方法 |
(Products and systems for the protection and repair of concrete structures. Granulometry analysis. Part 2 : test method for fillers for polymer bonding agents.) |
| NF P18-923-1999 |
混凝土結構的修復和保護用產品和系統.試驗方法.脫落法測量粘結強度 |
(Products and systems for the repair and protection of concrete structures. Test methods. Measurement of bond strength by pull-off.) |
| NF P18-924-1998 |
混凝土結構的修復和保護用產品和系統.試驗方法.聚合物拉伸強度的測定 |
(Products and systems for the protection and repair of concrete structures. Test methods. Determination of tensile strength development for polymers.) |
| NF P18-926-1999 |
混凝土結構的防護和修理用產品和系統,試驗方法.紅外分析(EN 1767) |
(PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES. TEST METHODS. INFRARED ANALYSIS. (EUROPEAN STANDARD EN 1767).) |
| NF P18-927-1-2000 |
混凝土結構的保護和修復用產品和系統.試驗方法.與環氧樹脂有關的重活化功能.第1部分:環氧樹脂等同物的測定 |
(Products and systems for the protection and repair of concrete structures - Test methods - Reactive functions related to epoxy resins - Part 1 : determination of epoxy equivalent.) |
| NF P18-927-2-2000 |
混凝土結構的保護和修復用產品和系統.試驗方法.與環氧樹脂有關的重活化功能.第2部分:用總基數對胺功能的測 |
(Products and systems for the protection and repair of concrete structures - Test methods - Reactive functions related to epoxy resins - Part 2 : determination of amine functions using the total basici) |
| NF P18-934-1999 |
混凝土結構的防護和修理用產品和系統,試驗方法. 開放時間測定(EN 12189) |
(PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES. TEST METHODS. DETERMINATION OF OPEN TIME. (EUROPEAN STANDARD EN 12189).) |
| NF P18-937-1998 |
混凝土結構制造和修復的產品和系統.修理磚石結構的壓力強度的測定(歐洲標準EN 12190) |
(Products and systems for the protection and repair of concrete structures. Test methods. Determination of compressive strength of repair mortar.) |
| NF P18-938-2002 |
混凝土結構的防護和維修用產品和系統.試驗方法.壓縮彈性模量的測定 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression.) |
| NF P18-939-1998 |
混凝土結構的修復和保護產品和系統.試驗方法.熱膨脹系數的測定 |
(Products and systems for the protection and repair of concrete structures. Test methods. Determination of the coefficient of thermal expansion.) |
| NF P18-942-2002 |
混凝土結構的防護和維修用產品和系統.試驗方法.凝固時間的測定 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of stiffening time.) |
| NF P18-945-2002 |
混凝土結構的防護和維修用產品和系統.試驗方法.抗毛細管吸收性的測定 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance of capillary absorption.) |
| NF P18-949-1-2002 |
混凝土結構修復和保護的產品和系統.試驗方法.測定熱容性.第1部分:解凍.浸入防凍鹽融雪 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 1 : freeze-thaw cycling with de-icing salt immersion.) |
| NF P18-949-2-2002 |
混凝土結構修復和保護的產品和系統.試驗方法.測定熱容性.第2部分:振動循環(熱振動) |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 2 : thunder-shower cycling (thermal shock).) |
| NF P18-949-3-2002 |
混凝土結構修復和保護的產品和系統.試驗方法.測定熱容性.第3部分:無溶解鹽沖擊的熱循環 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 3 : thermal cycling without de-icing salt impact.) |
| NF P18-949-4-2002 |
混凝土結構修復和保護的產品和系統.試驗方法.測定熱容性.第4部分:干熱循環 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 4 : dry thermal cycling.) |
| NF P18-949-5-2002 |
混凝土結構修復和保護的產品和系統.試驗方法.測定熱容性.第5部分:溫度沖擊耐力 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 5 : resistance to temperature shock.) |
| NF P18-950-2004 |
混凝土結構的保護和修理用產品和系統.試驗方法.耐強化學侵蝕的測定 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance to severe chemical attack.) |
| NF P18-953-1-2002 |
混凝土結構修復和保護的產品和系統.試驗方法.測定可行性.第1部分:觸變泥漿的流動性試驗 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 1 : test for flow of thixotropic mortars.) |
| NF P18-953-2-2002 |
混凝土結構修復和保護的產品和系統.試驗方法.測定可行性.第2部分:泥漿或灰漿的流動性試驗 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 2 : test for flow of grout or mortar.) |
| NF P18-953-3-2002 |
混凝土結構修復和保護的產品和系統.試驗方法.測定可行性.第3部分:泥漿或灰漿的流動性試驗 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 3 : test for flow of repair concrete.) |
| NF P18-953-4-2002 |
混凝土結構的防護和維修用產品和系統.試驗方法.可加工性的測定.第4部分:備用泥漿高空的應用 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 4 : application of repair mortar overhead.) |
| NF P18-954-1999 |
混凝土結構的修復和保護產品及系統.試驗方法.結構粘結劑特征表示用鋼與鋼之間粘性的測定 |
(PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES. TEST METHODS. DETERMINATION OF ADHESION STEEL-TO-STEEL FOR CHARACTERISATION OF STRUCTURAL BONDING AGENTS. (EUROPEAN STANDARD EN 12188).) |
| NF P18-955-1999 |
混凝土結構的修復和保護產品及系統.試驗方法.混凝土間粘性的測定 |
(Products and systems for the protection and repair of concrete structures. Test methods. Determination of adhesion concrete to concrete.) |
| NF P18-956-1999 |
混凝土結構的修復和保護產品及系統.試驗方法.傾斜剪切強度的測定 |
(Products and systems for the protection and repair of concrete structures. Test methods. Determination of slant shear strength.) |
| NF P18-957-2002 |
混凝土結構修復和保護的產品和系統.試驗方法.測定結構粘合劑的耐久性 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of the durability of structural bonding agents.) |
| NF P18-959-2-2003 |
混凝土構件的防護和維修的產品和系統.試驗方法.動態荷載下疲勞的測定.第2部分:淬火后疲勞的測定 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of fatigue under dynamic loading - Part 2 : after hardening.) |
| NF P18-966-1999 |
混凝土結構的修復和保護產品和系統.試驗方法.混凝土表面設施用結構粘結劑適用性的測量方法 |
(Products and systems for the protection and repair of concrete structures. Test methods. Tests to measure the suitability of structural bonding agents for application to concrete surface.) |
| NF P18-975-2002 |
混凝土結構的防護和維修用產品和系統.試驗方法.疏水性浸漬的干燥試驗 |
(Products and systems for the protection and repair of concrete structures - Test methods - Drying test for hydrophobic impregnation.) |
| NF P18-976-2002 |
混凝土結構的防護和維修用產品和系統.試驗方法.疏水性浸漬的吸水率和耐堿性試驗 |
(Products and systems for the protection and repair of concrete structures - Test methods - Water absorption and resistance to alkali for hydrophobic impregnations.) |
| NF P18-977-1-2003 |
混凝土結構的防護和維修用產品和系統.試驗方法.第1部分:聚合物及表面防護系統(SPS)線性收縮的測定 |
(Products and systems for the protection and repair of concrete structures - Test methods - Part 1 : determination of linear shrinkage for polymers and surface protection systems (SPS).) |
| NF P18-977-3-2003 |
混凝土結構的防護和維修用產品和系統.試驗方法.第3部分:結構粘合劑的老化線性收縮率測定 |
(Products and systems for the protection and repair of concrete structures - Test methods - Part 3 : determination of early age linear shrinkage for structural bonding agents.) |
| NF P18-977-4-2002 |
混凝土結構的防護和維修用產品和系統.試驗方法.第4部分:收縮率和膨脹率的測定 |
(Products and systems for the protection and repair of concrete structures - Test methods - Part 4 : determination of shrinkage and expansion.) |
| NF P18-978-2003 |
混凝土結構的保護和維修用產品和系統.試驗方法.增強保護用產品的觸變性測定 |
(Products and systems for the protection and repair of concrete structures - Test method - Determination of thixotropy of products for protection of reinforcement.) |
| NF P18-979-2002 |
混凝土結構的防護和維修用產品和系統.試驗方法.鹽力解凍后疏水性浸漬混凝土質量損失的測定 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of loss of mass of hydrophobic impregnated concrete after freeze-thaw salt stress.) |
| NF P19-102-2003 |
裝配式結構的輕骨料混凝土預制增強構件 |
(Prefabricated reinforced components of lightweight aggregate concrete with open structure.) |
| NF P19-103-1994 |
熱壓充氣混凝土干密度的測定 |
(DETERMINATION OF THE DRY DENSITY OF AUTOCLAVED AERATED CONCRETE. (EUROPEAN STANDARD EN 678).) |
| NF P19-104-1994 |
熱壓充氣混凝土壓強的測定 |
(DETERMINATION OF THE COMPRESSIVE STRENGTH OF AUTOCLAVED AERATED CONCRETE. (EUROPEAN STANDARD EN 679).) |
| NF P19-105-1997 |
熱壓充氣混凝土彎曲強度的測定 |
(Determination of flexural strength of autoclaved aerated concrete.) |
| NF P19-106-1997 |
多孔結構熱壓充氣混凝土或輕骨料混凝土加壓條件下彈性的靜模數測定 |
(Determination of static modulus of elasticity under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure.) |
| NF P19-107-1994 |
熱壓充氣混凝土干燥收縮率的測定 |
(DETERMINATION OF THE DRYING SHRINKAGE OF AUTOCLAVED AERATED CONCRETE. (EUROPEAN STANDARD EN 680).) |
| NF P19-108-1998 |
開式結構高壓蒸氧加氣混凝土或輕集料混凝土預制件用鋼筋網或組架焊接接縫剪切強度的測定 |
(Determination of shear strength of welded joints of reinforcement mats or cages for prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure.) |
| NF P19-109-1995 |
鋼筋和熱壓充氣混凝土膠合性能的“推拉“試驗法測定 |
(DETERMINATION OF THE BOND BEHAVIOUR BETWEEN REINFORCING BARS AND AUTOCLAVED AERATED CONCRETE BY THE “PUSH-OUT“ TEST. (EUROPEAN STANDARD EN 989).) |
| NF P19-110-1998 |
高壓蒸氧加氣混凝土制無負荷件中鋼應力的測定 |
(DETERMINATION OF STEEL STRESSES IN UNLOADED REINFORCED COMPONENTS MADE OF AUTOCLAVED AERATED CONCRETE. (EUROPEAN STANDARD EN 1738).) |
| NF P19-112-2003 |
高壓蒸氧加氣混凝土和多孔結構輕質集料混凝土中鋼筋防蝕檢驗的試驗方法 |
(Test methods for verification of corrosion protection of reinforcement in autoclaved aereted concrete and lightweight aggregate concrete with open structure.) |
| NF P19-113-1997 |
熱壓充氣混凝土中水分含量的測定(歐洲標準EN 1353) |
(Determination of moisture content of autoclaved aerated concrete.) |
| NF P19-115-1995 |
用熱壓充氣混凝土或多孔結構輕質集料混凝土制成的預制鋼筋構件的尺寸測定 |
(DETERMINATION OF THE DIMENSIONS OF PREFABRICATED REINFORCED COMPONENTS MADE OF AUTOCLAVED AERATED CONCRETE OR LIGHTWEIGHT AGGREGATE CONCRETE WITH OPEN STRUCTURE. (EUROPEAN STANDARD EN 991).) |
| NF P19-116-1998 |
開式結構高壓蒸氧加氣混凝土或輕集料混凝土預制件間接縫的共面力用剪切強度的測定 |
(Determination of shear strength for in-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure.) |
| NF P19-117-1995 |
多孔結構輕質集料混凝土干密度的測定 |
(DETERMINATION OF THE DRY DENSITY OF LIGHTWEIGHT AGGREGATE CONCRETE WITH OPEN STRUCTURE. (EUROPEAN STANDARD EN 992).) |
| NF P19-118-1997 |
多孔結構輕骨料混凝土壓縮強度的測定(歐洲標準EN 1354) |
(Determination of compressive strength of lightweight aggregate concrete with open structure.) |
| NF P19-120-1997 |
多孔結構熱壓充氣或輕骨料混凝土加壓條件下蠕動形變的測定(歐洲標準EN 1355) |
(Determination of creep strains under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure.) |
| NF P19-121-1997 |
橫向荷載下多孔結構熱壓充氣或輕骨料混凝土制預制增強部件的性能試驗(歐洲標準EN 1356) |
(Performance test for prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure under transverse load.) |
| NF P19-122-1996 |
多孔結構輕質集料混凝土撓曲強度的測定(歐洲標準EN 1521) |
(Determination of flexural strength of lightweight aggregate concrete with open structure.) |
| NF P19-123-1998 |
主要在縱向負載下的開式結構高壓蒸氧加氣混凝土或輕集料混凝土預制增強件的性能試驗(立式件) |
(Performance test for prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure under predominantly longitudinal load (vertical components).) |
| NF P19-124-1998 |
開式結構高壓蒸氧加氣混凝土或輕集料混凝土預制件間接縫的面外力用剪切強度的測定 |
(Determination of shear strength for out-of-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lighweight aggregate concrete with open structure.) |
| NF P19-125-1998 |
開式結構高壓蒸氧加氣混凝土或輕集料混凝土制多層件不同層間剪切強度的測定 |
(Determination of shear strength between different layers of multilayer components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure.) |
| NF P19-126-2000 |
用束試驗法對增強鋼和粘結行為的測定.第1部分:短款試驗 |
(Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the “beam test“ - Part 1 : short term test.) |
| NF P19-800-2001 |
預制混凝土產品的共同規則 |
(Common rules for precast concrete products.) |
| NF P19-806-2001 |
預制混凝土產品.欄柵用構件 |
(Precast concrete products - Elements for fences.) |
| NF P19-826-2003 |
預澆鑄混凝土制品.道路附屬設施和公園用品 |
(Precast concrete products - Street furniture and garden products.) |
| NF P19-828-1999 |
預制混凝土制品.玻璃纖維增強水泥的工廠生產控制的一般規則 |
(Precast concrete products - General rules for factory production control of glass-fibre reinforced cement.) |
| NF P19-829-1-1998 |
預制混凝土產品.玻璃增強混凝土的試驗方法.第1部分:基質堅硬度的測量.滑落試驗方法 |
(Precast concrete products. Test method for glass-fibre reinforced cement. Part 1 : measuring the consistency of the matrix, “Slump test“ method.) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com