標準號 |
中文名稱 |
英文名稱 |
| NF C93-328-1981 |
電子件.電感件和磁回路.非耦合磁回路用線圈和安裝附件.一般規定 |
(COMPONENTS FOR ELECTRONIC EQUIPMENTS. MAGNETIC CORES AND ACCESSORIES. ACCESSORIES FOR LAMINATIONS.) |
| NF C93-329-2000 |
U型和E型鐵氧體磁芯的標記 |
(Marking on U and E ferrites cores.) |
| NF C93-330-1997 |
用在通訊和電子設備的變壓器和電感器.線圈主尺寸:第1部分:層壓芯片線圈 |
(Transformers and inductors for use in telecommunication and electronic equipment. Main dimensions of coil formers. Part 1 : coil formers for laminated cores.) |
| NF C93-331-1973 |
電子件.磁和鐵氧體件.可調或不可調低電感線圈.一般規定 |
(COMPONENTS FOR ELECTRONIC EQUIPMENT. MAGNETIC COMPONENTS AND FERRITE MATERIALS. INDUCTOR OF LOW SELF-INDUCTANCE VALUE. GENERAL REQUIREMENTS.) |
| NF C93-332-1980 |
電子件.電信或?qū)Ｓ秒娮釉O(shè)備用變壓器和感應線圈.一般規定 |
(ELECTRONIC COMPONENTS. TRANSFORMERS AND INDUCTORS FOR TELECOMMUNICATION AND PROFESSIONAL ELECTRONIC EQUIPMENT. GENERAL REQUIREMENTS.) |
| NF C93-333-1987 |
電子件.磁和鐵氧體件.表面安裝用低電感線圈.一般規定 |
(MAGNETIC COMPONENTS. SURFACE MOUNTING INDUCTORS. GENERAL REQUIREMENTS.) |
| NF C93-334-1981 |
電子件.供電用磁性氧化鐵芯的尺寸（ＥＣ鐵芯） |
(Electronic components. Dimensions for magnetic oxyde cores intended for use in power supplies (ec-cores).) |
| NF C93-336-1983 |
電子設備用件.磁芯和附件.鐵芯用附件 |
(COMPONENTS FOR ELECTRONIC EQUIPMENT. MAGNETIC CORES AND ACCESSORIES. ACCESSORIES FOR FERRITE CORES.) |
| NF C93-337-1998 |
電子和通信設備用變壓器和電感器.測量方法和試驗程序 |
(Transformers and inductors for use in electronic and telecommunication equipment. Measuring methods and test procedures.) |
| NF C93-338-1998 |
磁性氧化物正方形磁芯(RM磁芯)的尺寸和附件 |
(Dimensions of square cores (RM-cores) made of magnetic oxides and associated parts.) |
| NF C93-338/A2-2000 |
由磁性氧化物和相關零件制造的方型磁心(RM-磁心)的尺寸 |
(Dimensions of square cores (RM-cores) made of magnetic oxides and associated parts.) |
| NF C93-339-1998 |
供電設備用磁性氧化鐵芯(ETD-CORES).尺寸 |
(Magnetic oxide cores (ETD-cores) intended for use in power supply applications. Dimensions.) |
| NF C93-340-1-2000 |
鐵氧體磁芯.表面缺陷極限指南.第1部分:總規范 |
(Ferrite cores - Guide on the limits of surface irregularities - Part 1 : general specification.) |
| NF C93-340-3-2000 |
鐵氧體磁心.表面不規則性限值指南.第3部分:ETD芯和E芯 |
(Ferrite cores - Guide on the limits of surface irregularities - Part 3 : ETD-cores and E-cores.) |
| NF C93-341-1998 |
電信和電子設備用變壓器和電感器的疊片鐵芯包裝件.第1部分:尺寸 |
(Laminated core packages for transformers and inductors used in telecommunication and electronic equipment. Part 1 : dimensions.) |
| NF C93-342-1998 |
用于遠程通信和電子設備的疊層磁芯包.第2部分:使用YEE2疊層的磁芯的電氣特性 |
(Laminated core packages for use in telecommunication and electronic equipment. Part 2 : electrical characteristics for cores using YEE 2 laminations.) |
| NF C93-343-1998 |
磁性氧化和相關零件制永久磁鐵芯.尺寸 |
(PM-cores made of magnetic oxides and associated parts. Dimensions.) |
| NF C93-345-1998 |
軟鐵素體材料分級(歐洲標準61332) |
(Soft ferrite material classification.) |
| NF C93-346-1998 |
電子和電信設備用固定電感器.標記代碼 |
(Fixed inductors for use in electronic and telecommunication equipment. Marking codes.) |
| NF C93-349-1998 |
回旋磁裝置中產生的內調諧產品值的測量方法 |
(Measuring method for the level of intermodulation products generated in a gyromagnetic device.) |
| NF C93-350-2000 |
微波鐵氧體件.主要特性的測量方法 |
(Microwave ferrite components - Measuring methods for major properties.) |
| NF C93-353-2003 |
磁性氧化物制壺形鐵心及相關零件的尺寸 |
(Dimensions of pot-cores made of magnetic oxides and associated parts.) |
| NF C93-354-2003 |
磁性零件有效參數的計算 |
(Calculation of the effective parameters of magnetic piece parts.) |
| NF C93-355-1968 |
電子件.無線電收音機的中頻變壓器 |
(COMPONENTS FOR ELECTRONIC EQUIPMENT. INTERMEDIATE FREQUENCY TRANSFORMERS USED IN BROADCAST RECEIVERS.) |
| NF C93-356-1998 |
鐵素體芯表面不規則性限值的指南.第2部分:RM芯 |
(Guidance of the limits of surface irregularities of ferrite cores. Part 2 : RM-cores.) |
| NF C93-361-1998 |
用于電子設備和通迅設備的變壓器和導體.第1部分:一般規范 |
(Transformers and inductors for use in electronic and telecommunication equipment. Part 1 : generic specification.) |
| NF C93-362-1998 |
用于電子和遠程通信設備的變壓器和導體.第2部分:以容量驗收過程為基礎的單型變壓器的分規范 |
(Transformers and inductors for use in electronic and telecommunication equipment. Part 2 : sectional specification for signal transformers on the basis of the capability approval procedure.) |
| NF C93-363-1998 |
用于電氣和遠程設備的變壓器和感應器.第3部分: 基于可驗收過程的電力變壓器分規范(歐洲標準EN61 248-3) |
(Transformers and inductors for use in electronic and telecommunication equipment. Part 3 : sectional specification for power transformers on the basis of the capability approval procedure.) |
| NF C93-364-1998 |
用于電子設備和通迅設備的變壓器和導體.第4部分:基于容量擴增過程的接轉模式電力供應(SMPS)用電力變壓器的 |
(Transformers and inductors for use in electronic and telecommunication and telecommunication equipment. Part 4 : sectional specification for power transformers for switched mode power supplies (SMPS) on the basis of the capability approval procedure.) |
| NF C93-365-1998 |
用于電氣和遠程設備的變壓器和感應器.第5部分: 基于可驗收過程的脈沖變壓器分規范(歐洲標準EN61 248-5) |
(Transformers and inductors for use in electronic and telecommunication equipment. Part 5 : sectional specification for pulse transformers on the basis of the capability approval procedure.) |
| NF C93-366-1998 |
印制板和印制板組件.設計和使用. 第1-1部分:一般要求.電氣件平坦性考慮.(EN 61.188-1-1) |
(Transformers and inductors for use in electronic and telecommunication equipment. Part 6 : sectional specification for inductors on the basis of the capability approval procedure.) |
| NF C93-367-1998 |
電子和電信設備用變壓器和電感器.第7部分:有關高頻變壓器性能檢驗程序基礎的分規范 |
(Transformers and inductors for use in electronic and telecommunication equipment. Part 7 : sectional specification for high-frequency transformers on the basis of the capability approval procedure.) |
| NF C93-368-2001 |
磁氧化物制成的低斷面芯的尺寸 |
(Dimensions of low-profile cores made of magnetic oxides.) |
| NF C93-369-1-2003 |
軟磁材料襯芯的測量方法.第1部分:總規范 |
(Cores made of soft magnetic materials - Measuring methods - Part 1 : generic specification.) |
| NF C93-369-3-2001 |
軟磁性材料制成的磁芯.測量方法.第3部分:高沖擊水平的磁化特性 |
(Cores made of soft magnetic materials - Measuring methods - Part 3 : magnetic properties at high excitation level.) |
| NF C93-370-1-2002 |
高頻感應件.電氣特性和測量方法.第1部分:毫微亨(利)級芯片式感應器 |
(High frequency inductive components - Electrical characteristics and measuring methods - Part 1 : nanohenry range chip inductor.) |
| NF C93-371-2003 |
高頻感應部件.非電氣特性和測量方法.第1部分:電子和電信設備用固定的表面安裝感應器 |
(High frequency inductive components - Non electrical characteristics and measuring methods - Part 1 : fixed, surface mounted inductors for use in electronic and telecommunication equipment.) |
| NF C93-372-2-2003 |
鐵氧體軟磁芯的術語和命名.第2部分:尺寸參考 |
(Terms and nomenclature for cores made of magnetically soft ferrites - Part 2 : reference of dimensions.) |
| NF C93-400-1-1-2002 |
電子設備連接器.試驗和測量.第1-1部分:一般檢查.試驗1a:外觀檢查 |
(Connectors for electronic equipment - Tests and measurements - Part 1-1 : general examination - Test 1a : visual examination.) |
| NF C93-400-1-100-2001 |
電子設備用連接件.試驗和測量.第1-100部分:通則.可應用的出版物 |
(Connectors for electronic equipment - Tests and measurements - Part 1-100 : general - Applicable publications.) |
| NF C93-400-1-2-2002 |
電子設備連接器.試驗和測量.第1-2部分:一般檢查.試驗1b:尺寸和質量檢查 |
(Connectors for electronic equipment - Tests and measurements - Part 1-2 : general examination - Test 1b : examination of dimension and mass.) |
| NF C93-400-1-2001 |
電子設備用連接件.試驗和測量.第1部分:通則 |
(Connectors for electronic equipment - Test and measurements - Part 1 : general.) |
| NF C93-400-1-3-1998 |
電氣設備用機電件.基本試驗過程和測量方法.第1部分:一般檢驗.第3節:試驗1C:電氣嚙合長度 |
(Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 1 : general examination. Section 3 : test 1c : electrical engagement length.) |
| NF C93-400-1-4-1998 |
電氣設備用機電件.基本試驗過程和測量方法.第1部分:一般檢驗.第3節:試驗1D:接觸保護效果 |
(Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 1 : general. Section 4 : test 1d : contact protection effectiveness (scoop-proof).) |
| NF C93-400-10-4-1997 |
電子設備用機電件.基本試驗過程和測量方法.第10部分:沖擊試驗(自由件)、靜負荷試驗(固定件)、耐久性 |
(Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 10 : impact tests (free components), static load tests (fixed components), endurance tests and overload tests. Section 4 : test 10d : electrical o |
| NF C93-400-11-1-1999 |
電子設備用電機件.基本試驗過程和測量方法.第11部分:氣候試驗.第1節:試驗11A.氣候序列 |
(Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 11 : climatic tests. Section 1 : test 11a. Climatic sequence.) |
| NF C93-400-11-10-2002 |
電子設備連接器.試驗和測量.第11-10部分:氣候試驗.試驗11j:寒冷 |
(Connectors for electronic equipment - Tests and measurements - Part 11-10 : climatic tests - Test 11j : cold.) |
| NF C93-400-11-11-2002 |
電子設備連接器.試驗和測量.第11-11部分:氣候試驗.試驗11k:低氣壓 |
(Connectors for electronic equipment - Tests and measurements - Part 11-11 : climatic tests - Test 11k : low air pressure.) |
| NF C93-400-11-12-2002 |
電子設備連接器.試驗和測量.第11-12部分:氣候試驗.試驗11m:濕熱、循環 |
(Connectors for electronic equipment - Tests and measurements - Part 11-12 : climatic tests - Test 11m : damp heat, cyclic.) |
| NF C93-400-11-13-2002 |
電子設備連接器.試驗和測量.第11-13部分:氣候試驗.試驗11n:無釬焊包裝連接的氣密性 |
(Connectors for electronic equipment - Tests and measurements - Part 11-13 : climatic tests - Test 11n : gas tightness, solderless wrapped connections.) |
| NF C93-400-11-14-1997 |
電子設備用機電件.基本試驗過程和測量方法.第11部分:氣候試驗.第14節:試驗11p:單一流動氣體腐蝕試驗 |
(Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 11 : climatic tests. Section 14 : test 11p : flowing single gas corrosion test.) |
| NF C93-400-11-2-2002 |
電子設備連接器.試驗和測量.第11-2部分:氣候試驗.試驗11b:組合的/順序的低溫、低氣壓和濕熱 |
(Connectors for electronic equipment - Tests and measurements - Part 11-2 : climatic tests - Test 11b : combined/sequential cold, low air pressure and damp heat.) |
| NF C93-400-11-3-2002 |
電子設備連接器.試驗和測量.第11-3部分:氣候試驗.試驗11c:濕熱、穩態 |
(Connectors for electronic equipment - Tests and measurements - Part 11-3 : climatic tests - Test 11c : damp heat, steady state.) |
| NF C93-400-11-4-2002 |
電子設備連接器.試驗和測量.第11-4部分:氣候試驗.試驗11d:溫度的快速變化 |
(Connectors for electronic equipment - Tests and measurements - Part 11-4 : climatic tests - Test 11d : rapid change of temperature.) |
| NF C93-400-11-5-2002 |
電子設備連接器.試驗和測量.第11-5部分:氣候試驗.試驗11e:霉菌生長 |
(Connectors for electronic equipment - Tests and measurements - Part 11-5 : climatic tests - Test 11e : mould growth.) |
| NF C93-400-11-6-2002 |
電子設備連接器.試驗和測量.第11-6部分:氣候試驗.試驗11f:鹽霧腐蝕 |
(Connectors for electronic equipment - Tests and measurements - Part 11-6 : climatic tests - Test 11f : corrosion, salt mist.) |
| NF C93-400-11-7-1997 |
電子設備用機電件.基本試驗過程和測量方法.第11部分:氣候試驗.第7節:試驗11g:混合流動氣體腐蝕試驗 |
(Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 11 : climatic tests. Section 7 : test 11g : flowing mixed gas corrosion test.) |
| NF C93-400-11-8-1999 |
電子設備的電機件.基本試驗過程和測量方法.第11部分:氣候試驗.第8節:試驗11H:沙和塵土 |
(Eletromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 11 : climatic tests. section 8 : test 11h : sand and dust.) |
| NF C93-400-11-9-2002 |
電子設備連接器.試驗和測量.第11-9部分:氣候試驗.試驗11i:干熱 |
(Connectors for electronic equipment - Tests and measurements - Part 11-9 : climatic tests - Test 11i : dry heat.) |
| NF C93-400-12-6-1997 |
電子設備用機電件.基本試驗過程和測量方法.第12部分:焊接試驗.第6節:試驗12f:防熔密封和機械焊接中的清洗 |
(Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 12 : soldering tests. Section 6 : test 12f : sealing against flux and cleaning solvents in machine soldering.) |
| NF C93-400-12-7-2002 |
電子設備用連接器.試驗和測量.第12-7部分: 軟釬焊試驗.試驗 12g: 軟釬焊性,潤濕平衡法 |
(Connectors for electronic equipment - Tests and measurements - Part 12-7 : Soldering tests - Test 12g : solderability, wetting balance method.) |
| NF C93-400-13-1-1997 |
電子設備用機電件.基本試驗過程和測量方法.第13部分:機械運行試驗.第1節:試驗13a:嚙合力及分離力 |
(Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 13 : mechanical operating tests. Section 1 : test 13a : engaging and separating forces.) |
| NF C93-400-14-7-1998 |
電子設備的電機件.基本試驗過程和測量方法.第14部分:密封試驗.第7節:試驗14G.撞擊水 |
(Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 14 : sealing tests. Section 7 : test 14g : impacting water.) |
| NF C93-400-15-8-1997 |
電子設備用機電件.基本試驗過程和測量方法.第15部分:觸點和終端的機械試驗.第8節:試驗15h:對所用工具有阻 |
(Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 15 : mechanichal tests on contacts and terminations. Section 8 : test 15h : contact retention system resistance to tool application.) |
| NF C93-400-16-20-1997 |
電子設備用機電件.基本試驗過程和測量方法.第16部分:觸點和終端的機械試驗.第20節:試驗16t:機械強度(無焊 |
(Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 16 : mechanical tests on contacts and terminations. Section 20 : test 16t : mechanical strength (wired termination of solderless connections).) |
| NF C93-400-19-3-1998 |
電子設備電機件.基本試驗過程和測量方法.第19部分:化學抗性試驗.第3節:試驗19c:液流阻力 |
(Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 19 : chemical resistance tests. Section 3 : test 19c : fluid resistance.) |
| NF C93-400-1985 |
電子器件.連接器件.基本試驗方法和測量方法 |
(Electronic components. Connecting devices. Basic testing procedures and measuring methods.) |
| NF C93-400-2-1-2002 |
電子設備連接器.試驗和測量.第2-1部分:帶電連續性和接觸電阻試驗.試驗2a:接觸電阻.毫伏法 |
(Connectors for electronic equipment - Tests and measurements - Part 2-1 : electrical continuity and contact resistance tests - Test 2a : contact resistance - Millivolt level method.) |
| NF C93-400-2-2-2003 |
電子設備連接器.試驗和測量.第2-2部分:電連續性和接觸電阻試驗.試驗2b:接觸電阻.規定試驗電流法 |
(Connectors for electronic equipment - Tests and measurements - Part 2-2 : electrical continuity and contact resistance tests - Test 2b : contact resistance - Specified test current method.) |
| NF C93-400-2-3-2002 |
電子設備連接器.試驗和測量.第2-3部分:帶電連續性和接觸電阻試驗.試驗2c:接觸電阻變化 |
(Connectors for electronic equipment - Tests and measurements - Part 2-3 : electrical continuity and contact resistance tests - Test 2c : contact resistance variation.) |
| NF C93-400-2-5-2003 |
電子設備連接器.試驗和測量.第2-5部分:電連續性和接觸電阻試驗.試驗2e:接觸干擾 |
(Connectors for electronic equipment - Tests and measurements - Part 2-5 : electrical continuity and contact resistance tests - Test 2e : contact disturbance.) |
| NF C93-400-2-6-2002 |
電子設備連接器.試驗和測量.第2-6部分:帶電連續性和接觸電阻試驗.試驗2f:外殼帶電連續性 |
(Connectors for electronic equipment - Tests and measurements - Part 2-6 : electrical continuity and contact resistance tests - Test 2f : housing (shell) electrical continuity.) |
| NF C93-400-20-2-2001 |
電子設備的電機件.基本試驗過程和測量方法.第20-2部分:試驗:20b.燃燒性試驗.阻燃性 |
(Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 20-2 : test 20b - Flammability tests - Fireproofness.) |
| NF C93-400-23-3-2001 |
電子設備用電機件.基本試驗過程和測量方法.第23-3部分:試驗23c.連接件和附屬件的屏蔽效應 |
(Electromechanical components for elctronic equipment - Basic testing procedures and measuring methods - Part 23-3 : test 23c : shielding effectiveness of connectors and accessories.) |
| NF C93-400-23-4-2002 |
電子設備用連接器.試驗和測量.第23-4部分: 篩選和過濾試驗.試驗 23d: 時間域中的傳輸線路反射 |
(Connectors for electronic equipment - Tests and measurements - Part 23-4 : screening and filtering tests - Test 23d : transmission line reflections in the time domain.) |
| NF C93-400-25-1-2002 |
電子設備用連接器.試驗和測量.第25-1部分: 試驗 25a:串音比 |
(Connectors for electronic equipment - Tests and measurements - Part 25-1 : test 25a - Crosstalk ratio.) |
| NF C93-400-25-2-2002 |
電子設備連接器.試驗和測量.第25-2部分:試驗25b.衰減(介入損耗) |
(Connectors for electronic equipment - Tests and measurements - Part 25-2 : test 25b : attenuation (insertion loss).) |
| NF C93-400-25-3-2002 |
電子設備用連接器.試驗和測量.第25-3部分: 試驗 25c:上升時間梯度 |
(Connectors for electronic equipment - Tests and measurement - Part 25-3 : test 25c - Rise time degradation.) |
| NF C93-400-25-4-2002 |
電子設備用連接器.試驗和測量.第25-4部分: 試驗 25d:傳播延遲 |
(Connectors for electronic equipment - Tests and measurements - Part 25-4 : test 25d - Propagation delay.) |
| NF C93-400-3-1-2002 |
電子設備連接器.試驗和測量.第3-1部分:絕緣試驗.試驗3a:絕緣電阻 |
(Connectors for electronic equipment - Tests and measurements - Part 3-1 : insulation tests - Test 3a : insulation resistance.) |
| NF C93-400-4-1-2003 |
電子設備連接器.試驗和測量.第4-1部分:電壓應力試驗.試驗4a:耐電壓 |
(Connectors for electronic equipment - Tests and measurements - Part 4-1 : voltage stress tests - Test 4a : voltage proof.) |
| NF C93-400-4-2-2002 |
電子設備連接器.試驗和測量.第4-2部分:電壓應力試驗.試驗4b:部分放電 |
(Connectors for electronic equipment - Tests and measurements - Part 4-2 : voltage stress tests - Test 4b : partial discharge.) |
| NF C93-400-4-3-2002 |
電子設備連接器.試驗和測量.第4-3部分:電壓應力試驗.試驗4c:預絕緣卷筒的電壓檢驗 |
(Connectors for electronic equipment - Tests and measurements - Part 4-3 : voltage stress tests - Test 4c : voltage proof of pre-insulated crimp barrels.) |
| NF C93-400-5-1-2002 |
電子設備連接器.試驗和測量.第5-1部分:載流量試驗.試驗5a:升溫 |
(Connectors for electronic equipment - Tests and measurements - Part 5-1 : current-carrying capacity tests - Test 5a : temperature rise.) |
| NF C93-400-5-2-2002 |
電子設備連接器.試驗和測量.第5-2部分:載流量試驗.試驗5b:電流-溫度下降 |
(Connectors for electronic equipment - Tests and measurements - Part 5-2 : current-carrying capacity tests - Test 5b : current-temperature derating.) |
| NF C93-400-6-1-2002 |
電子設備連接器.試驗和測量.第6-1部分:動態應力試驗.試驗6a:穩態加速 |
(Connectors for electronic equipment - Tests and measurements - Part 6-1 : dynamic stress tests - Test 6a : acceleration, steady state.) |
| NF C93-400-6-2-2002 |
電子設備連接器.試驗和測量.第6-2部分:動態應力試驗.試驗6b:連續沖擊 |
(Connectors for electronic equipment - Tests and measurements - Part 6-2 : dynamic stress tests - Test 6b : bump.) |
| NF C93-400-6-3-2002 |
電子設備連接器.試驗和測量.第6-3部分:動態應力試驗.試驗6c:沖擊 |
(Connectors for electronic equipment - Tests and measurements - Part 6-3 : dynamic stress tests - Test 6c : shock.) |
| NF C93-400-6-4-2002 |
電子設備連接器.試驗和測量.第6-4部分:動態應力試驗.試驗6d:振動(正弦) |
(Connectors for electronic equipment - Tests and measurements - Part 6-4 : dynamic stress tests - Test 6d : vibration (sinusoidal).) |
| NF C93-400-6-5-2000 |
電子設備用機電件.基本試驗程序和測量方法.第6部分:動態應力試驗.第5節:試驗6e:隨機振動 |
(Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 6 : dynamic stress tests - Section 5 : test 6e : random vibration.) |
| NF C93-400/A1-1988 |
NF C 93-400-1985的補充件1 |
() |
| NF C93-4001-1988 |
C 93-400-85的補充1 |
() |
| NF C93-401-1985 |
電子件.印制電路板的兩部件連接和插入連接 |
(ELECTRONIC COMPONENTS. TWO PART AND EDGE SOCKET. CONNECTORS FOR PRINTED BOARD APPLICATION.) |
| NF C93-403-101-1998 |
經質量評定的直流低頻模擬和數字高速數據設備用連接器.第3部分:矩形連接器.第101節:連接在1.27mm X 2.54mm |
() |
| NF C93-404-1988 |
電子件.微型葙支架 |
(ELECTRONIC COMPONENTS. CHIP CARRIER.) |
| NF C93-406-001-1997 |
直流低頻模擬設備和數字高速數據應用設備用已審定質量的連接器.第4部分:印制電路板連接器.第001節:空白詳細 |
(Connectors with assessed quality, for use in D.C., low-frequency analogue and in digital high-speed data applications. Part 4 : printed board connectors. Section 001 : blank detail specification.) |
| NF C93-406-1-2002 |
有質量評定的直流低頻模擬及數字高速數據應用系統用連接器.第1部分:總規范 |
(Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high speed data applications - Part 1 : generic specification.) |
| NF C93-406-1/A1-2002 |
經質量評定的直流低頻模擬及數字高速數據應用系統用連接器.第1部分:總規范.能力鑒定.修改件A1 |
(Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high speed data applications - Part 1 : generic specification - Capability approval.) |
| NF C93-406-1/A2-2002 |
經質量評定的直流低頻模擬設備及數字高速數據設備用連接器.第1部分:總規范.能力鑒定.修改件A2 |
(Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high speed data applications - Part 1 : generic specification - Capability approval.) |
| NF C93-406-102-1998 |
直流低頻率模擬設備和高速數據應用設備用經質量評定的連接器.第4部分:印制電路板聯接器.第102節:帶前定心,編碼和預配合部件的米制多用途插件用雙部分單極聯接器的祥細規格102 : detail specification for two-part single-pole connectors, for multiple uses on plug-in uni |
Connectors with assessed quality for use in D.C., low-frequency analogue and in digital high speed data applications. Part 4 : printed board connectors. Section 102 : detail specification for two-part single-pole connectors, for multiple uses on plug-in u |
| NF C93-406-2-001-2002 |
電氣設備連接器.第2-001部分:圓形連接器.空白詳細規范 |
(Connectors for electronic equipment - Part 2-001 : circular connectors - Blank detail specification.) |
| NF C93-406-2-102-2002 |
電子設備連接器.第2-102部分:經質量評定的圓形連接器.外部低電壓電源用插頭和插座的分規范 |
(Connectors for electronic equipment - Part 2-102 : circular connectors with assessed quality - Detail specification for plugs and jacks for external low voltage power supply.) |
| NF C93-406-2-1999 |
直流低頻模擬設備和高速數字?jǐn)?shù)據應用設備用連接器.第2部分:已評定質量的圓形連接器.分規范 |
(Connectors for use in d.c. low-frequency analogue and digital high-speed data applications. Part 2 : circular connectors with assessed quality. Sectional specification.) |
| NF C93-406-3-001-2000 |
直流低頻模擬設備和高速數字?jǐn)?shù)據應用設備用連接器.第3-001部分:經質量評定的矩形連接器.空白詳細規范 |
(Connectors for use in d.c., low-frequency ananlogue and digital high-speed data applications - Part 3-001 : rectangular connectors with assessed quality - Blank detail specification.) |
| NF C93-406-3-100-2000 |
直流低頻模擬設備和高速數字?jǐn)?shù)據應用設備用連接器.第3-100部分:經質量評定的矩形連接器.用梯形外罩和1.27MM |
() |
| NF C93-406-3-2000 |
直流低頻模擬設備和高速數字?jǐn)?shù)據應用設備用連接器.第3部分:經質量評定的矩形連接器.分規范 |
(Connectors for use in d.c., low-frequency analogue and digital high-speed data applications - Part 3 : rectangular connectors with assessed quality - Sectional specification.) |
| NF C93-406-4-100-2002 |
電子設備連接器.第4-100部分:已評定質量的印制板連接器.印制電路板和底板用的柵極為2,5mm的兩段連接器組件 |
(Connectors for electronic equipment - Part 4-100 : printed board connectors with assessed quality - Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and b) |
| NF C93-406-4-101-2002 |
電子設備連接器.第4-101部分:經質量評定的印制電路板連接器.帶有符合IEC 60917的印制電路板和底板用2,0mm的 |
(Connectors for electronic equipment - Part 4-101 : printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed board) |
| NF C93-406-4-103-1999 |
直流低頻模擬電路和高速數據傳輸數字電路的連接器.第4-103部分:有質量評定的印制板連接器.有屏蔽罩及基本網 |
(Connecxtors for use in d.c. low-frequency analogue and digital high speed data applications. Part 4-103 : printed board connectors with assessed quality. Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm.) |
| NF C93-406-4-104-1999 |
直流低頻模擬設備和高速數據應用設備用連接器.第4-104部分:經質量評定的印制板連接器.帶0.5mm多格柵終端的2 |
() |
| NF C93-406-4-105-1999 |
直流低頻率模擬設備和高速數據應用設備用經質量評定的連接器.第4部分:印制電路用連接器.第105節:用途廣泛的 |
() |
| NF C93-406-4-107-2002 |
電子設備用連接器.第4-107部分:經質量評定的印制板連接器.固定部分有印制板用焊接和壓入端子、活動部分有不 |
() |
| NF C93-406-4-110-2002 |
電子設備用連接器.第4-110部分: 具有質量評定的印刷板連接器.包括全屏蔽和閉鎖功能的帶2.0mm基本網格的閉鎖 |
(Connectors for electronic equipment - Part 4-110 : printed board connectors with assessed quality - Detail specification for latched cable connector system having a basic grid of 2,0 mm including full) |
| NF C93-406-4-2002 |
有質量評定的直流低頻模擬及數字高速數據應用系統用連接器.第4部分:印制板連接器分規范 |
(Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4 : sectionnal specification - Printed board connectors.) |
| NF C93-406-5-2002 |
直流低頻模擬及數字高速數據應用系統用連接器. 第5部分:具有質量評定的在線插座.分規范 |
(Connectors for use in d.c., low-frequency analogue and digital high-speed data applications - Part 5 : in-line sockets with assessed quality - Sectional specification.) |
| NF C93-406-7-2001 |
直流低頻模擬設備和高速數據應用設備用的連接器.第7部分:經質量評定(包括資格和能力認可)的電纜輸出附件.分 |
(Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7 : cable outlet accessories with assessed quality, including qualification and capability approval -) |
| NF C93-407-17-1999 |
頻率低于3MHz的連接器.第17部分:可充電電池用可多向插合的互連器件的詳細規范 |
(Connectors for frequencies below 3 MHz - Part 17 : detail specification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries.) |
| NF C93-407-9-2001 |
低于3MHz的射頻連接器.第9部分:無線電及相關音響設備用的圓形連接器 |
(Connectors for frequencies below 3 MHz - Part 9 : circular connectors for radio and associated sound equipment.) |
| NF C93-410-1983 |
電子設備用機電件.質量保證.手動斷路器.一般標準 |
(ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENTS. MANUALY ACTIVATED SWITCHES. GENERIC SPECIFICATION.) |
| NF C93-411-1983 |
電子設備用機電件.按鈕開關.過渡標準 |
(ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENTS. PUSH BUTTON SWITCHES. SECTIONAL SPECIFICATION.) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com