標準號 |
中文名稱 |
英文名稱 |
| NF L22-136-1984 |
通用六角頭螺釘短螺紋 |
(Bolt, hexagonal head, current use, short thread.) |
| NF L22-137-1984 |
帶鎖緊孔六角頭短螺紋螺釘 |
(Bolt, hexagonal head, with locking hole, short thread.) |
| NF L22-138-1984 |
精密六角頭短螺紋螺釘 |
(Bolt, hexagonal head, close tolerance, short thread.) |
| NF L22-139-1984 |
帶鎖緊孔精密頭角頭短螺紋螺釘 |
(BOLT,HEXAGONAL HEAD,CLOSE TOLERANCE,WITH LOCKING HOLE,SHORT THREAD.) |
| NF L22-140-1984 |
六角頭全螺紋螺釘 |
(Bolt, hexagonal head, threaded to head.) |
| NF L22-141-1984 |
有鎖緊孔方角頭全螺紋螺釘 |
(Bolt, hexagonal head, with locking hole, threaded to head.) |
| NF L22-142-1984 |
常用有銷孔六角頭螺釘 |
(BOLT,HEXAGONAL HEAD,WITH COTTER PIN HOLE,CURRENT USE.) |
| NF L22-145-1985 |
六角頭承拉螺釘.ISO螺紋4G類 |
(Bolt, hexagonal head, for tensile application, ISO thread 4G class.) |
| NF L22-146-1985 |
有鎖緊孔六角頭承拉螺釘.ISO螺紋4G類 |
(Bolt, hexagonal head, with locking hole, for tensile application. ISO thread 4G class.) |
| NF L22-147-1985 |
帶頸桿六角頭承拉螺釘.ISO螺紋4G類 |
(Bolt, hexagonal head, necked shank, for tensile application. ISO thread 4G class.) |
| NF L22-148-1985 |
帶頸桿有銷緊孔六角頭承拉螺釘.ISO螺紋4G類 |
(Bolts, hexagonal head, necked shank, with locking hole, for tensile application. ISO thread 4G class.) |
| NF L22-151-1975 |
開槽圓柱頭螺釘和緊固凸圓頭螺釘.國際單位制螺紋 |
(Slotted and drilled cheese head screws. Sim thread (rech.).) |
| NF L22-152-1975 |
開槽扁頭螺釘.國際單位米制螺紋 |
(Slotted mushroom head screws. Sim thread (rech.).) |
| NF L22-153-1975 |
90°埋頭開槽螺釘.國際單位米制螺紋 |
(Slotted 90 degrees countersunk head screws. Sim thread (rech.).) |
| NF L22-154-1975 |
120°半圓頭開槽埋頭螺釘.單際單位米制螺紋 |
(Slotted raised 120 degrees countersunk head screws. Sim thread (rech.).) |
| NF L22-156-1975 |
錐頂凸圓頭開槽螺釘.國際單位米制螺紋 |
(Slotted raised cheese head screws with cone point. Sim thread (rech.).) |
| NF L22-157-1975 |
錐頂扁頭開槽螺釘.國際單位米制螺紋 |
(Slotted mushroom head screws with cone point. Sim thread (rech.).) |
| NF L22-158-1975 |
錐頂90°埋頭開槽螺釘.國際單位米制螺紋 |
(Slotted 90 degrees countersunk head screws with cone point. Sim thread (rech.).) |
| NF L22-159-1975 |
錐頂120°半圓頭開槽埋頭螺釘.國際單位米制螺紋 |
(Slotted raised 120 degrees countersunk head screws with cone point. Sim thread (rech.).) |
| NF L22-161-1984 |
有NF L22-72十字槽的通用100°埋頭螺釘 |
(Bolt, 100 degrees countersunk head, current use, nf L 22-072 cross recess.) |
| NF L22-162-1984 |
有NF L22-072十字槽的精密100°全螺紋埋頭螺釘 |
(Bolt, 100 degrees countersunk head, close tolerance, nf L 22-072 cross recess.) |
| NF L22-163-1984 |
有NF L22-072十字槽的常用100°度全螺紋埋頭螺釘 |
(Bolt, 100 degrees countersunk head, threaded to head, nf L 22-072 cross recess.) |
| NF L22-167-1984 |
有NF L22-070十字槽的常用100°埋頭螺釘 |
(Bolt, 100 degrees countersunk head, current use, nf L 22-070 cross recess.) |
| NF L22-168-1984 |
有NF L22-070 十字槽的緊公差100°沉頭螺釘 |
(BOLT,100 DEGREES COUNTERSUNK HEAD,CLOSE TOLERANCE,NF L 22-070,CROSS RECESS.) |
| NF L22-169-1984 |
有 NF L22-070十字槽的100°全螺紋埋頭螺釘 |
(BOLT,100 DEGREES COUNTERSUNK HEAD,THREADED TO HEAD,NF L 22-070,CROSS RECESS.) |
| NF L22-171-1984 |
有NF L22-072十字槽的常用半圓頭螺釘 |
(Bolt, pan head, current use, nf L22-072 cross recess.) |
| NF L22-173-1984 |
有NF L22-072十字槽全螺紋半圓頭螺釘 |
(BOLT,PAN HEAD,THREADED TO HEAD,NF L 22-072 CROSS RECESS.) |
| NF L22-176-1984 |
有NF L22-072十字槽錐頂半圓頭非磁性螺釘 |
(Bolt, pan head, amagnetic with cone point NF L 22-072 cross recess.) |
| NF L22-177-1984 |
有NF L22-070十字槽常用半圓頭螺釘 |
(Bolt, pan head, current use, nf L 22-070 cross recess.) |
| NF L22-179-1984 |
有NF L22-070十字槽全螺紋半圓頭螺釘 |
(BOLT,PAN HEAD,THREADED TO HEAD,NF L 22-070 CROSS RECESS.) |
| NF L22-181-1976 |
有BNAE十字槽扁頭螺釘.國際單位米制螺紋 |
(MUSHROOM HEAD SCREWS WITH B.N.A.E. CROSS RECESS. SIM THREAD.) |
| NF L22-182-1976 |
有BNAE十字槽90°埋頭螺釘.國際單位米制螺紋 |
(90 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSS RECESS. SIM THREAD.) |
| NF L22-183-1976 |
有BNAE十字槽90°埋頭螺釘.國際單位米制螺紋 |
(RAISED 120 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSS RECESS. SIM THREAD.) |
| NF L22-184-1976 |
有BNAE十字槽120°埋頭螺釘.國際單位米制螺紋 |
(120 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSS RECESS. SIM THREAD.) |
| NF L22-186-1976 |
有BNAE十字槽錐頂扁頭螺釘.國際單位米制螺紋 |
(MUSHROOM HEAD SCREWS WITH B.N.A.E. CROSS RECESS AND CONE POINT. SIM THREAD.) |
| NF L22-187-1976 |
有BNAE十字槽錐頂90°埋頭螺釘.國際單位米制螺紋 |
(90 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSS RECESS AND CONE POINT. SIM THREAD.) |
| NF L22-188-1976 |
有BNAE十字槽錐頂120°埋頭半圓頭螺釘單國際單位制米螺紋 |
(RAISED 120 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSS RECESS AND CONE POINT. SIM THREAD.) |
| NF L22-189-1976 |
有BNAE十字槽錐頂120°埋頭螺釘.國際單位米制螺紋 |
(120 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSS RECESS AND CONE POINT. SIM THREAD.) |
| NF L22-201-1984 |
短螺紋精密螺釘.六角頭.ISO螺紋 |
(Bolt, hexagonal head, short thread, close tolerance. ISO thread.) |
| NF L22-202-1984 |
短螺紋精密螺釘.帶鎖緊孔六角頭.ISO螺紋 |
(Bolt, hexagonal head, short thread, close tolerance with locking hole. ISO thread.) |
| NF L22-205-1984 |
有銷孔常用六角頭螺釘.ISO螺紋 |
(Bolt, hexagonal head, with cotter pin hole, current use. ISO thread.) |
| NF L22-206-1984 |
常用六角頭螺釘.ISO螺紋 |
(Bolt, hexagonal head, current use. ISO thread.) |
| NF L22-207-1984 |
帶緊鎖孔常用六角頭螺釘.ISO螺紋 |
(Bolt, hexagonal head, with locking hole, current use. ISO thread.) |
| NF L22-208-1984 |
全螺紋六角頭螺釘.ISO螺紋 |
(Bolt, hexagonal head, threaded to head. ISO thread.) |
| NF L22-209-1984 |
帶緊鎖孔全螺紋六角頭螺釘.ISO螺紋 |
(Bolt, hexagonal head, with locking hole threaded to head. ISO thread.) |
| NF L22-220-1984 |
帶緊鎖絲孔內六角圓柱頭螺釘.4H類ISO螺紋 |
(Hexagonal socket cylindrical head screw with hole for lockwire. ISO thread 4H class.) |
| NF L22-221-1983 |
無緊鎖絲孔內六角圓柱頭螺釘.4H類ISO螺紋 |
(HEXAGON SOCKET HEAD CAP SCREWS WITHOUT HOLE FOR LOCKING WIRE. ISO THREAD. 4 H CLASS.) |
| NF L22-222-1984 |
帶緊鎖絲孔內六角圓柱頭螺釘.4G類ISO螺紋 |
(Hexagonal socket cylindrical head screw with hole for lockwire. ISO thread 4G class.) |
| NF L22-223-1983 |
無緊鎖孔全六角圓柱頭螺釘.4G類ISO螺紋 |
(HEXAGON SOCKET HEAD CAP SCREWS WITHOUT HOLE FOR LOCKING WIRE. ISO THREAD. 4 G CLASS.) |
| NF L22-224-1984 |
帶緊鎖絲孔全六角圓柱頭全螺紋螺釘.4G類ISO螺紋 |
(Hexagonal socket cylindrical head screw, threaded to head, with hole for lockwire. ISO thread 4 G class.) |
| NF L22-225-1983 |
無緊鎖絲孔全六角圓柱頭全螺紋螺釘.4G類ISO螺紋 |
(HEXAGON SOCKET HEAD CAP SCREWS,FULLY THREADED WITHOUT HOLE FOR LOCKING WIRE. ISO THREAD. 4 G CLASS.) |
| NF L22-236-1989 |
航空用螺栓螺母.十二角頭螺釘.使用溫度在高于235℃ |
(AIRCRAFT BOLTS AND NUTS. BOLT,BIHEXAGONAL HEAD. ISO M THREAD. 4G CLASS.) |
| NF L22-237-1989 |
航空用螺栓螺母.帶鎖緊孔十二角頭螺釘.使用溫度在高于235℃ |
(AIRCRAFT BOLTS AND NUTS. BOLT,BIHEXAGONAL HEAD,WITH LOCKING HOLE. ISO M THREAD. 4G CLASS.) |
| NF L22-246-1989 |
航空用螺栓螺母.十二角頭螺釘.細螺距.使用溫度高于在２３５℃ |
(AIRCRAFT BOLTS AND NUTS. BOLT,BIHEXAGONAL HEAD. ISO M THREAD. 4G CLASS. FINE PITCH.) |
| NF L22-247-1989 |
航空用螺檢螺母.十二角頭螺釘.細螺距帶鎖緊孔.使用溫度在高于２３５℃以上 |
(AIRCRAFT BOLTS AND NUTS. BOLT,BIHEXAGONAL HEAD,WITH LOCKING HOLE. ISO M THREAD. 4G CLASS. FINE PITCH.) |
| NF L22-251-1968 |
航空用ISO螺紋螺拴螺母.AICMA十字槽“通用”１００°沉頭螺釘 |
(GENERAL PURPOSE 100 DEGREES COUNTERSUNK HEAD SCREWS WITH A.I.C.M.A. CROSS RECESS.) |
| NF L22-252-1968 |
航空用螺拴螺母.短螺紋精密螺釘.AICMA十字槽１００°埋頭螺釘 |
(PRECISION 100 DEGREES COUNTERSUNK HEAD SCREWS WITH SHORT THREAD,A.I.C.M.A. CROSS RECESS.) |
| NF L22-256-1966 |
航空用螺拴螺母.AICMA十字槽全螺紋１００°埋頭螺釘.ISO螺紋 |
(AIRCRAFT FASTENERS. 100 DEGREES COUNTERSUNK HEAD SCREWS,FULLY THREADED,A.I.C.M.A. CROSS RECESS.) |
| NF L22-257-1982 |
航空用螺拴螺母.BNAE 十字槽“通用”１００°埋頭螺釘.ISO螺紋 |
(General purpose 100 degrees countersunk head screws,B.N.A.E. Cross recess. ISO thread.) |
| NF L22-258-1967 |
航空用螺拴螺母.BNAE 十字槽１００°短螺紋精密埋頭螺釘 |
(AIRCRAFT FASTENERS. PRECISION 100 DEGREES COUNTERSUNK HEAD SCREWS WITH SHORT THREAD,B.N.A.E. CROSS RECESS.) |
| NF L22-259-1982 |
航空用螺拴螺母.BNAE 十字槽１００°全螺紋埋頭螺釘.ISO螺紋 |
(100 degrees countersunk head screws, fully threaded B.N.A.E. Cross recess. ISO thread.) |
| NF L22-271-1966 |
航空用螺拴螺母.AICMA 十字槽半圓頭螺釘 |
(AIRCRAFT FASTENERS. PAN HEAD SCREWS,WITH A.I.C.M.A. CROSS RECESS.) |
| NF L22-272-1966 |
航空用ISO螺紋螺拴螺母.AICMA 十字槽全螺紋半圓頭螺釘 |
(AIRCRAFT FASTENERS. PAN HEAD SCREWS,FULLY THREADED,WITH A.I.C.M.A. CROSS RECESS.) |
| NF L22-273-1966 |
航空用螺拴螺母.十字槽錐頂半圓頭非磁性螺釘 |
(AIRCRAFT FASTENERS. NON-MAGNETIC PAN HEAD SCREWS WITH TRUNCATED CONE POINT. CROSS RECESS.) |
| NF L22-274-1982 |
航空用螺拴螺母.BNAE十字槽半圓頭螺釘.ISO螺紋 |
(Pan head screws,B.N.A.E. Cross recess. ISO thread.) |
| NF L22-275-1982 |
航空用螺拴螺母.BNAE十字槽全螺紋半圓頭螺紋釘.ISO螺紋 |
(Pan head screws, fully threaded,B.N.A.E. Cross recess. ISO thread.) |
| NF L22-277-1968 |
航空用螺拴螺母.溫度在260℃以上用全螺紋緊旋圓柱頭螺釘 |
(DRILLED CHEESE HEAD SCREWS,FULLY THREADED,FOR TEMPERATURES ABOVE 260 DEGREES C.) |
| NF L22-291-1979 |
全螺紋開槽９０度埋頭螺釘.ISO螺紋 |
(SLOTTED 90 DEGREES COUNTERSUNK HEAD SCREWS,FULLY THREADED. ISO THREAD.) |
| NF L22-292-1979 |
全螺紋開槽６０度埋頭螺釘.ISO螺紋 |
(SLOTTED 60 DEGREES COUNTERSUNK HEAD SCREWS,FULLY THREADED. ISO THREAD.) |
| NF L22-293-1979 |
全螺紋開槽圓頭螺釘.ISO螺紋 |
(SLOTTED CHEESE EHAD SCREWS,FULLY THREADED. ISO THREAD.) |
| NF L22-294-1979 |
全螺紋寬槽凸圓頭釘.ISO螺紋 |
(SLOTTED RAISED CHEESE HEAD SCREWS,FULLY THREADED. ISO THREAD.) |
| NF L22-296-1979 |
全螺紋開槽緊旋圓柱頭螺釘.ISO螺紋 |
(SLOTTED AND DRILLED CHEESE HEAD SCREWS,FULLY THREADED. ISO THREAD.) |
| NF L22-298-1979 |
全螺紋凹六角圓柱頭螺釘.ISO螺紋 |
(HEXAGON SOCKET HEAD CAP SCREWS,FULLY THREADED. ISO THREAD.) |
| NF L22-305-1977 |
無頭平頂凸六角螺釘.ISO螺紋 |
(HEXAGON SOCKET SET SCREWS,FLAT POINT. ISO THREAD.) |
| NF L22-306-1977 |
半制動端六角凹頭止動螺釘.ISO螺紋 |
(HEXAGON SOCKET SET SCREWS,HALF DOG POINT. ISO THREAD.) |
| NF L22-307-1977 |
無頭凹頂凹六角螺釘ISO螺紋 |
(HEXAGON SOCKET SET SCREWS,CUP POINT. ISO THREAD.) |
| NF L22-308-1977 |
無頭尖頂凹六角螺釘.ISO螺紋 |
(HEXAGON SOCKET SET SCREWS,CONE POINT. ISO THREAD.) |
| NF L22-309-1977 |
無頭截錐頂凹六角螺釘.ISO螺紋 |
(HEXAGON SOCKET SET SCREWS,TRUNCATED CONE POINT. ISO THREAD.) |
| NF L22-411-1973 |
國際單位制螺紋標準六角螺母 |
(ORDINARY HEXAGON NUTS. SIM THREAD. (RECH.).) |
| NF L22-412-1973 |
國際單位制螺紋輕六角螺母 |
(HEXAGON REDUCED NUTS. SIM THREAD. (RECH.).) |
| NF L22-413-1973 |
國際單位制螺扁六角螺母 |
(HEXAGON THIN NUTS. SIM THREAD. (RECH.).) |
| NF L22-420-1954 |
航空用螺拴螺母.冠形厚六角螺母 |
(AIRCRAFT FASTENERS. HEXAGON THICK CASTLE NUTS. (RECH.).) |
| NF L22-425-1954 |
航空用螺拴螺母.冠形扁六角螺母 |
(AIRCRAFT FASTENERS. HEXAGON THIN CASTLE NUTS. (RECH.).) |
| NF L22-431-2000 |
航空用螺栓和螺母.標準厚度、標準凸起度六角頭普通螺母.ISO M或ISO MJ螺紋.根據直徑4H5H或5H的Ⅱ類公差 |
(Aircraft bolts and nuts - Nuts, hexagonal, plain, normal height, normal across flats, ISO M or ISO MJ threads, II, 4H5H or 5H tolerance class according to diameter.) |
| NF L22-432-2000 |
航空用螺栓和螺母.標準厚度、標準凸起度六角頭普通螺母.左旋ISO螺紋.根據直徑４H５H或５H的Ⅱ類公差 |
(Aircraft bolts and nuts - Nuts, hexagonal, plain, normal height, normal across flats, left-hand ISO M or ISO MJ threads, II, 4H5H or 5H tolerance class according to diameter.) |
| NF L22-433-2000 |
航空用螺栓和螺母.標準厚度、標準凸起度六角頭普通螺母.ISO M或ISO MJ螺紋４H公差等級 |
(Aircraft bolts and nuts - Nuts, hexagonal, plain, normal height, normal across flats, ISO M or ISO MJ threads, 4H tolerance class.) |
| NF L22-434-2000 |
航空用螺栓和螺母.標準厚度、標準凸起度六角頭普通螺母.ISO螺紋左旋４H公差級 |
(Aircraft bolts and nuts - Nuts, hexagonal, plain, normal height, normal across flats, left-hand ISO M or ISO MJ threads, 4H tolerance class.) |
| NF L22-435-2000 |
帶標準凸起度扁六角頭普通螺母.ISO M或ISO MJ螺紋.按直徑4H5H或5H進行公差分類 |
(Nuts, hexagonal, plain, reduced height, normal across flats, ISO M or ISO MJ threads 4H5H or 5H tolerance class according to diameter.) |
| NF L22-436-2000 |
航空用螺栓和螺母.帶標準凸起度扁六角頭普通螺母.左旋ISO M或ISO MJ螺紋.接直徑４H５H或5H進行公差分類 |
(Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, normal across flats, left-hand ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.) |
| NF L22-437-2000 |
航空用螺栓和螺母.帶鎖緊孔、標準凸起度扁六角頭普通螺母.ISO M或ISO MJ螺紋.按直徑4H5H或5H進行公差分類 |
(Aircraft bolts and nuts - Nuts, hexagonal, palin, reduced height, normal across flats, with locking holes, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.) |
| NF L22-438-2000 |
航空用螺栓和螺母.帶鎖緊孔、標準凸起度扁六角頭普通螺母.左旋ISO M或ISO MJ螺紋.接直徑4H５H或５H進行公差 |
(Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, normal across flats, with locking holes, left-hand ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.) |
| NF L22-439-2000 |
航空用螺栓和螺母.帶鎖緊孔、標準凸起度扁六角頭普通螺母.ISO M或ISO MJ螺紋.４H公差級 |
(Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, normal across flats, with locking holes, ISO M or ISO MJ threads, 4H tolerance class.) |
| NF L22-440-2000 |
航空用螺栓和螺母.帶鎖緊孔、標準凸起度扁六角頭普通螺母.左旋ISO M或ISO MJ螺紋.４H公差級 |
(Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, normal across flats, with locking holes, left-hand ISO M or ISO MJ threads, 4H tolerance class.) |
| NF L22-441-2000 |
航空用螺栓和螺母.帶鎖緊孔、標準凸起度扁六角頭普通螺母.ISO M或ISO MJ螺紋.按直徑5H4H或４H公差級 |
(Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, reduced across flats, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.) |
| NF L22-442-2000 |
航空用螺栓和螺母.帶鎖緊孔、標準凸起度扁六角頭普通螺母.左旋ISO M或ISO MJ螺紋.按直徑5H4H或４H公差級 |
(Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, reduced across flats, left-hand ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.) |
| NF L22-443-2000 |
航空用螺栓和螺母.帶鎖緊孔、標準凸起度扁六角頭普通螺母.ISO M或ISO MJ螺紋.按直徑5H4H或４H公差級 |
(Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, reduced across flats, with locking holes, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.) |
| NF L22-444-2000 |
航空用螺栓和螺母.帶鎖緊孔、標準凸起度扁六角頭普通螺母.左旋ISO M或ISO MJ螺紋.按直徑5H4H或４H公差級 |
(Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, reduced across flats, with locking holes, left-hand ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.) |
| NF L22-451-2000 |
航空用螺栓和螺母.槽頂(有槽)扁六角頭螺母.標準厚度.ISO M或ISO MJ螺紋.按直徑４H５H或５H進行公差分類 |
(Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, normal height, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.) |
| NF L22-453-2000 |
航空用螺栓和螺母.槽頂(有槽)扁六角頭螺母.ISO M或ISO MJ螺紋.按直徑４H５H或５H進行公差分類 |
(Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, reduced height, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.) |
| NF L22-455-2000 |
航空用螺栓和螺母.槽頂(有槽)扁六角頭螺母.ISO M或ISO MJ螺紋.４H公差級 |
(Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, reduced height, ISO M or ISO MJ threads, 4H tolerance class.) |
| NF L22-457-2000 |
航空用螺栓和螺母.槽頂(有槽)普通厚度六角頭螺母.ISO M或ISO MJ螺紋.４H公差級 |
(Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, normal height, ISO M or ISO MJ threads, 4H tolerance class.) |
| NF L22-458-2000 |
航空用螺栓和螺母.槽頂(有槽)普通厚度六角頭螺母.左旋ISO M或ISO MJ螺紋.４H公差級 |
(Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, normal height, left-hand ISO M or ISO MJ threads, 4H tolerance class.) |
| NF L22-461-2000 |
航空用螺栓和螺母.帶鎖緊孔、標準凸起度扁六角頭螺母.ISO M或ISO MJ細牙螺紋.４H５H公差級 |
(Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, normal across flats, with locking holes, ISO M or ISO MJ threads, fine pitch threads, 4H5H tolerance class.) |
| NF L22-462-2000 |
航空用螺栓和螺母.帶鎖緊孔、標準凸起度扁六角頭螺母.左旋ISO M或ISO MJ細牙螺紋.４H５H公差級 |
(Aircraft bolts and nuts - Nuts, hexagonal, Plain, reduced height, normal across flats, with locking holes, left-hand ISO M or ISO MJ threads, fine pitch threads, 4H5H tolerance class.) |
| NF L22-500-2001 |
緊固件.最高使用溫度小于或等于425℃的自鎖緊螺母.技術要求 |
(Fasteners - Nuts, self-locking, with maximum operating temperature less than or equal to 425 o - Technical requirements.) |
| NF L22-500M1-1974 |
425℃以下溫度用內鎖緊螺母.產品標準 |
() |
| NF L22-510-1954 |
航空用螺拴螺母.溫度在３００℃以下用自鎖緊螺母 |
(AIRCRAFT FASTENERS WITH SIM THREAD. SELF-LOCKING HEXAGON NUTS FOR TEMPERATURES BELOW 300 DEGREES C. (RECH.).) |
| NF L22-512-2001 |
航空螺栓和螺母.MoS2潤滑的、鍍鎘、鋼制、帶擴孔和系留墊圈的、ISO M或ISO MJ螺紋的自鎖定六角螺母.等級:11 |
(Aircraft bolts and nuts - Nuts, hexagonal, self-locking, with counterbore and captive washer, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambian) |
| NF L22-517-1980 |
E-26 NCT 25 不銹鋼制內緊鎖十二角頭螺母.ISO螺紋 |
(12 point self-locking flange nuts, in E-Z 6 nct 25 corrosion resisting steel. ISO thread.) |
| NF L22-518-1966 |
航空用螺拴螺母.內鎖緊十二角頭厚螺母.溫度級：５００℃、７００℃、８００℃ |
(AIRCRAFT FASTENERS. 12 POINT THICK FLANGE NUTS,SELF-LOCKING. TEMPERATURE CLASSES : 500,700,800 DEGREES C.) |
| NF L22-519-2000 |
航空用螺栓和螺母.自鎖十二角頭螺母.ISO M或ISO MJ鍍鎘鋼螺紋.MoS2潤滑.分類:1550MPa(室溫)/235℃ |
(Aircraft bolts and nuts - Bihexagonal nuts, self-locking, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 550 MPa (at ambient temperature) / 235 oC.) |
| NF L22-522-1966 |
航空用螺拴螺母.細螺距內鎖緊十二角頭厚螺母.溫度級:５００℃、７００℃、８００℃ |
(AIRCRAFT FASTENERS. 12 POINT THICK FLANGE NUTS,SELF-LOCKING,FINE PITCH. TEMPERATURE CLASSES : 500,700,800 DEGREES C.) |
| NF L22-524-1969 |
航空用ISO螺紋螺拴螺母.細螺距內鎖緊十二角頭螺母.溫度級：６５０℃ |
(NUT-DOUBLE HEXAGON, SELF LOCKING, FINE PITCH THREADS, FOR TEMPERATURES UP TO 650 DEGREES CELSIUS.) |
| NF L22-525-2001 |
航空螺栓和螺母.鋼制、鍍鎘、MoS2潤滑的、細螺距螺紋、ISO M螺紋、自鎖緊雙六角頭螺母.等級:1100MPa(室溫)/ |
(Aircraft bolts and nuts - Nuts, bihexagonal, self-locking, ISO M threads, fine pitch threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambiant temperature) / 235 oC.) |
| NF L22-526-1980 |
E-２６NCT２５不銹鋼內鎖緊十二角頭螺毋.MJ 螺紋 |
(12 POINT SELF-LOCKING FLANGE NUTS IN E-Z 6 NCT 25 CORROSION RESISTING STEEL. MJ THREAD.) |
| NF L22-531-1977 |
E-２６NCT２５不銹鋼制內鎖緊嵌入螺母.ISO螺紋 |
(SELF-LOCKING CLINCH NUTS,IN E-Z 6 NCT 25 CORROSION RESISTING STEEL. ISO THREAD.) |
| NF L22-533-1975 |
埋頭內鎖緊系留螺母.雙耳.米制螺紋 |
(SELF-LOCKING ANCHOR NUTS,COUNTERSUNK TYPE,TWO LUGS. SIM THREAD. (RECH.).) |
| NF L22-534-1975 |
埋頭內鎖緊系留螺母.雙耳多孔.國際單位米制螺紋 |
(Self-locking anchor nuts, countersunk type, two lugs with countersunk rivet holes. Sim thread (rech.).) |
| NF L22-535-1975 |
埋頭內鎖緊系留螺母.單耳單孔.國際單位米制螺紋 |
(Self-locking anchor nuts, countersunk type, single lug with one hole. Sim thread (rech.).) |
| NF L22-536-1975 |
埋頭內鎖緊系留螺母.單耳雙埋孔.國際單位米制螺紋 |
(Self-locking anchor nuts, countersunk type, single lug with countersunk rivet hole. Sim thread (rech.).) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com