標準號 |
中文名稱 |
英文名稱 |
| NF R57-301-2002 |
電動道路車輛.車輛荷載運行期間產生的噪聲.聲級測定 |
(Electrically propelled road vehicles - Airborne acoustical noise of vehicle during charging with on-board chargers - Determination of sound power level.) |
| NF R61-301-1978 |
自行車用六角螺母和板手 |
(HEXAGONAL NUTS AND SPANNERS FOR CYCLES.) |
| NF R61-331-1977 |
M14x1.25錐形座火花塞板手 |
(WRENCHES FOR SPARK PLUGS 14X1,25 WITH CONICAL SEATING.) |
| NF R61-701-1978 |
汽車設備用鉸車 |
(WINCHES FOR MOTOR VEHICLE EQUIPMENT.) |
| NF R63-101-1998 |
車輛升降機(歐洲標準EN 1493) |
(Vehicle lifts.) |
| NF R63-105-2001 |
移動式千斤頂和相關升降設備 |
(Mobile or movable jacks and associated lifting equipment.) |
| NF R63-201-1985 |
道路車輛.汽車車庫工具.測量和檢驗工具 |
(ROAD VEHICLES. GARAGE EQUIPMENT. ENGINE TESTING AND MEASURING EQUIPMENT.) |
| NF R63-202-2000 |
道路車輛.汽車車庫工具.發動機RPM轉速計.總規范 |
(Road vehicles - Garage equipment - Engine RPM tachometer - General specifications.) |
| NF R63-301-1984 |
道路車輛.汽車車庫工具.推進裝置幾何測量設備 |
(ROAD VEHICLES. GARAGE EQUIPMENT. GEOMETRY CONTROL DEVICES FOR RUNNING GEAR.) |
| NF R63-302-1999 |
壓力儀表.摩托車輪胎壓力和/或膨脹率用檢查儀器 |
(Pressure gauges. Apparatus for inspection of pressure and/or inflation of tyres for motor vehicles. Metrology, requirements and testing.) |
| NF R63-304-1986 |
道路車輛.汽車車庫工具.轉動平臺 |
(ROAD VEHICLES. GARAGE EQUIPMENT. SWIVEL-PLATE.) |
| NF R63-703-1987 |
道路車輛.車庫工具.步數計 |
(ROAD VEHICLES. GARAGE EQUIPMENT. PEDOMETERS.) |
| NF R63-705-1982 |
道路車輛.汽車車庫工具.自錄式減速計 |
(ROAD VEHICLES. GARAGE EQUIPMENT. RECORDING DECELEROMETERS.) |
| NF R63-801-1982 |
道路車輛.汽車車庫工具.照明燈校正設備 |
(ROAD VEHICLES. GARAGE EQUIPMENT. EQUIPMENT FOR CHECKING AND ADJUSTING LIGHTS.) |
| NF R80-001-1980 |
塑料.軟、硬塑料產品修理 |
(Plastics. Division into rigid products and flexible products.) |
| NF R80-101-1980 |
塑料.緊固后穩定性試驗.扭力板手法 |
(Plastics. Testing of behaviour under clamping. Torque wrench method.) |
| NF R80-501-1980 |
軟塑料和軟微孔塑料.易臟特性 |
(FLEXIBLE PLASTICS AND FLEXIBLE CELLULAR PLASTICS. STAINING CAPABILITY.) |
| NF R81-008-1980 |
微孔塑料.可選擇性 |
(CELLULAR PLASTICS. SELECTION CRITERIA.) |
| NF R81-009-1980 |
微孔塑料.硬產品或軟產品和半硬產品分類方法 |
(Cellular plastics. Method for grading products into rigid, flexible and semi-rigid categories.) |
| NF R81-101-1980 |
硬微孔塑料.流體通過測定尺寸變化 |
(Rigid cellular plastics. Determination of dimensional variations on immersion in fluids.) |
| NF R81-301-1980 |
帶皮軟微孔塑料.刮平試驗 |
(Flexible cellular plastics with skin. Scratching test.) |
| NF R81-302-1980 |
帶皮軟微孔塑料.冷卻脆裂試驗.重物墜落試驗 |
(Flexible cellular plastics with skin. Cold brittleness test. Falling weight test.) |
| NF R81-303-1982 |
帶皮軟微孔塑料.汽車制造用耐磨強度 |
(FLEXIBLE CELLULAR PLASTICS WTIH SKIN. RESISTANCE TO RUBBING FOR AUTOMOBILE CONSTRUCTION.) |
| NF R81-304-1982 |
帶皮軟微孔塑料.汽車制造試驗用樣塊 |
(FLEXIBLE CELLULAR PLASTICS WITH SKIN. SAMPLE BLOCK FOR TEST PURPOSES FOR AUTOMOBILE CONSTRUCTION.) |
| NF R81-305-1982 |
帶皮軟微孔塑料.人造光（氙燈）下汽車制造用塑料皮老化試驗 |
(FLEXIBLE CELLULAR PLASTICS WITH SKIN. SKIN AGEING TEST UNDER ARTIFICIAL LIGHT (XENON LAMPS) FOR AUTOMOBILE CONSTRUCTION.) |
| NF R82-101-1980 |
硬、軟塑料.儲存和未儲存產品接觸時的表面狀態 |
(Rigid and flexible plastics. Effect on the appearance contact with products used for storage and removal from storage.) |
| NF R83-001-1980 |
硬塑料.可選擇性 |
(RIGID PLASTICS. SELECTION CRITERIA.) |
| NF R83-101-1982 |
硬塑料.用汽車制造中的噴丸處理測定耐磨強度 |
(RIGID PLASTICS. RESISTANCE TO WEAR BY SHOT-BLASTING FOR AUTOMOBILE CONSTRUCTION.) |
| NF R84-001-1980 |
軟塑料.可選擇特性 |
(FLEXIBLE PLASTICS. SELECTION CRITERIA.) |
| NF R84-101-1980 |
軟塑料.放在熱環境之后表面穩定性 |
(Flexible plastics. Appearance stability after exposure to heat.) |
| NF R93-183-1980 |
電阻電焊鋼螺釘、螺栓和螺母機械特性 |
(MECHANICAL CHARACTERISTICS OF STEEL RESISTANCE WELDING SCREWS,STUDS AND NUTS.) |
| NF R93-506-1955 |
雙拼式管狀鉚釘 |
(TWO PIECE TUBULAR RIVETS.) |
| NF R93-507-1947 |
2-16mm空心鉚釘 |
(HOLLOW RIVETS FROM 2 TO 16 MM.) |
| NF R93-508-1943 |
2.5-5mm管形開口鉚釘 |
(SPLIT TUBULAR RIVETS FROM 2.5 TO 5 MM.) |
| NF R93-509-1943 |
1.6-5mm凹口鉚釘 |
(NOTCHED RIVETS FROM 1.6 TO 5 MM.) |
| NF R93-903-1978 |
輕合金用六角空心螺紋塞 |
(HEXAGONAL HOLLOW SCREW-PLUGS FOR USE ON LIGHT ALLOYS.) |
| NF R93-905-1978 |
裝填塞和排放塞 |
(FILLING AND DRAINING PLUGS.) |
| NF R93-910-1978 |
槽形磨 |
(CAP PLUG.) |
| NF R93-911-1978 |
汽車制造膨脹塞 |
(EXPANSIBLE CAPS FOR AUTOMOBILE CONSTRUCTION.) |
| NF R94-301-1989 |
道路車輛.帶O型密封圈的螺紋連接尺寸特征 |
(ROAD VEHICLES. THREADING CONNECTION FOR COMPONENTS INCLUDING AN “0“ RING. DIMENSIONAL CHARACTERISTICS.) |
| NF R95-301-1960 |
軟操縱用纜索和套管 |
(FLEXIBLE CONTROL CABLES.) |
| NF R95-403-1970 |
雙錐套管道接頭.連接尺寸 |
(PIPE FITTINGS WITH DOUBLE TAPER SLEEVES. COUPLING DIMENSIONS.) |
| NF R95-404-1968 |
錐頸雙拼式管道接頭 |
(PIPE FITTINGS IN TWO PARTS WITH TAPERED BEARING.) |
| NF R95-405-1970 |
雙錐套管道接頭.插入件 |
(PIPE FITTINGS WITH DOUBLE TAPER SLEEVES. INSERTS.) |
| NF R95-406-1975 |
能量?jī)?chǔ)備制動系統.螺旋連接接頭和彈性墊圈 |
(ENERGY RESERVE BRAKE SYSTEMS. COUPLINGS WITH THREAD-CONNECTIONS AND FLEXIBLE GASKETS.) |
| NF R96-201-1931 |
機器和儀表轉動方向 |
(DIRECTION OF ROTATION OF MACHINES AND EQUIPMENT.) |
| NF R99-001-1943 |
徑向摩擦密封墊圈 |
(RADIAL FRICTION SEALING RINGS.) |
| NF R99-021-1953 |
柔性接頭墊圈 |
(RINGS FOR FLEXIBLE JOINTS.) |
| NF R99-030-2004 |
輪胎氣門嘴螺紋 |
(Tyre valve threads.) |
| NF R99-031-1974 |
輪胎氣門.機件凹槽 |
(VALVES FOR TYRES. CORE CHAMBER.) |
| NF R99-090-1980 |
金屬和有色金屬圓管.推薦尺寸 |
(Circular section tubes of non ferrous metals and alloys. Recommended dimensions.) |
| NF R99-202-1966 |
襯墊用紙和紙板 |
(PAPER AND BOARD FOR JOINTS.) |
| NF R99-210-1979 |
道路車輛.壓制橡膠混料.分類.符號.特性 |
(ROAD VEHICLES. COMPACT RUBBER BASED COMPOUNDS. CLASSIFICATION. SYMBOLIZATION. CHARACTERISTICS.) |
| NF S10-005-1995 |
光學和光學儀器.光學涂層.第1部分:定義 |
(Optics and optical instruments. Optical coatings. Part 1 : definitions.) |
| NF S10-008-1-1996 |
光學和光學儀器.光學件和系統繪圖的準備.第1部分:通則 |
(Optics and optical instruments. Preparation of drawings for optical elements and systems. Part 1 : general.) |
| NF S10-008-10-1996 |
光學和光學儀器.光學件和系統繪圖的準備.第10部分:透鏡件的圖表表示數據 |
(Optics and optical instruments. Preparation of drawings for optical elements and systems. Part 10 : table representing data of a lens element.) |
| NF S10-008-11-1996 |
光學和光學儀器.光學件和系統繪圖的準備.第11部分:非公差性數據 |
(Optics and optical instruments. Preparation of drawings for optical elements and systems. Part 11 : non-toleranced data.) |
| NF S10-008-12-1998 |
光學和光學儀器.光學件和系統圖形的制備.第12部分:非球面形表面 |
(OPTICS AND OPTICAL INSTRUMENTS. PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS. PART 12 : ASPHERIC SURFACES.) |
| NF S10-008-14-2003 |
光學和光學儀器.光學件和系統制圖圖準備.第14部分:波前變形公差 |
(Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 14 : Wavefront deformation tolerance.) |
| NF S10-008-2-1996 |
光學和光學儀器.光學件和系統繪圖的準備.第2部分:材料缺陷.應力雙折射 |
(Optics and optical instruments. Preparation of drawings for optical elements and systems. Part 2 : material imperfections. Stress birefringence.) |
| NF S10-008-3-1996 |
光學和光學儀器.光學件和系統繪圖的準備.第2部分:材料缺陷.氣泡和夾渣 |
(Optics and optical instruments. Preparation of drawings for optical elements and systems. Part 3 : material imperfections. Bubbles and inclusions.) |
| NF S10-008-4-1998 |
光學及光學儀器.光學件和系統圖形的制備.第4部分:不完備材料的不均勻性和擦痕 |
(Optics and optical instruments. Preparation of drawings for optical elements and systems. Part 4 : material imperfections. Inhomogeneity and striae.) |
| NF S10-008-5-1996 |
光學和光學儀器.光學件和系統繪圖的準備.第5部分:表面形狀公差 |
(Optics and optical instruments. Preparation of drawings for optical elements and systems. Part 5 : surface form tolerances.) |
| NF S10-008-6-1996 |
光學和光學儀器.光學件和系統繪圖的準備.第6部分:合軸公差 |
(Optics and optical instruments. Preparation of drawings for optical elements and systems. Part 6 : centring tolerances.) |
| NF S10-008-7-1996 |
光學和光學儀器.光學件和系統繪圖的準備.第7部分:表面缺陷公差 |
(Optics and optical instruments. Preparation of drawings for optical elements and systems. Part 7 : surface imperfection tolerances.) |
| NF S10-008-8-1998 |
光學及光學儀器.光學件和系統圖形的制備.第8部分:表面特征 |
(Optics and optical instruments. Preparation of drawings for optical elements and systems. Part 8 : surface texture.) |
| NF S10-008-9-1996 |
光學和光學儀器.光學件和系統繪圖的準備.第9部分:表面處理和涂覆 |
(Optics and optical instruments. Preparation of drawings for optical elements and systems. Part 9 : surface treatment and coating.) |
| NF S10-010-1995 |
光學和光學儀器.光學涂層.第3部分:環境穩定性 |
(Optics and optical instruments. Optical coatings. Part 3 : environmental durability.) |
| NF S10-011-1995 |
光學和光學儀器.光學涂層.第2部分:光學性質 |
(Optics and optical instruments. Optical coatings. Part 2 : optical properties.) |
| NF S10-014-1996 |
光學玻璃坯件.25℃時的耐酸溶液腐蝕性.試驗方法和分類 |
(Raw optical glass. Resistance to attack by aqueous acidic solutions at 25 degrees celsius. Test method and classification.) |
| NF S10-015-1991 |
玻璃和玻璃陶瓷.努氏硬度試驗D |
(Glass and glass ceramics. Knoop hardness test D.) |
| NF S10-016-1995 |
未加工光學玻璃.雙折射的定義 |
(Raw optical glass. Determination of birefringence.) |
| NF S10-017-1994 |
未加工的光學玻璃.抗50℃堿性磷酸鹽洗滌劑溶液腐蝕性.試驗和分類 |
(Raw optical glass. Resistance to attack by aqueous alkaline phosphate-containing detergent solutions at 50 degrees celsius. Testing and classification.) |
| NF S10-018-1996 |
光學玻璃坯件.耐50℃水堿性溶液腐蝕性的試驗方法和分類 |
(Raw optical glass. Resistance to attack by aqueous alkaline solutions at 50 degrees celsius. Test method and classification.) |
| NF S10-019-1998 |
大塊預制型狀的未加工的光學玻璃.氣泡和其它雜質.試驗方法和分類 |
(RAW OPTICAL GLASS IN BULK AND PRESHAPED FORMS. BUBBLES AND OTHER INCLUSIONS. TEST METHOD AND CLASSIFICATION.) |
| NF S10-020-1998 |
鏡片和光學儀器.標準波長 |
(Optics and optical instruments. Reference wavelengths.) |
| NF S10-021-1996 |
光學和光學儀器.光學涂層.第4部分:特定的試驗方法 |
(OPTICS AND OPTICAL INSTRUMENTS. OPTICAL COATINGS. PART 4 : SPECIFIC TEST METHODS.) |
| NF S10-022-1997 |
未加工光學玻璃.術語 |
(Raw optical glass. Vocabulary.) |
| NF S10-023-2000 |
未加工的光學玻璃.金剛石薄片的可磨性.試驗方法和分類 |
(Raw optical glass - Grindability with diamond pellets - Test method and classification.) |
| NF S10-030-2002 |
光學和光學儀器.環境試驗方法.第1部分:試驗的范圍和定義 |
(Optics and optical instruments - Environmental test methods - Part 1 : definitions, extent of testing.) |
| NF S10-040-1998 |
光學和光學儀器.光學轉換功能.定義和數學關系 |
(Optics and optical instruments. Optical transfer function. Definitions and mathematical relationships.) |
| NF S10-041-1998 |
光學和光學儀器.光學轉換功能.測量規則和程序 |
(OPTICS AND OPTICAL INSTRUMENTS. OPTICAL TRANSFER FUNCTION. PRINCIPLES AND PROCEDURES OF MEASUREMENT.) |
| NF S10-042-1998 |
光學和光學儀器.光學系統的質量評估.失真的測定 |
(OPTICS AND OPTICAL INSTRUMENTS. QUALITY EVALUATION OF OPTICAL SYSTEMS. DETERMINATION OF DISTORSION.) |
| NF S10-043-1998 |
光學和光學儀器.成像系統的遮蔽閃光.測量的定義和方法 |
(OPTICS AND OPTICAL INSTRUMENTS. VEILING GLARE OF IMAGE-FORMING SYSTEMS. DEFINITIONS AND METHODS OF MEASUREMENT.) |
| NF S10-044-1999 |
光學和光學儀器.光學傳輸功能(OTF)測量的準確性 |
(Optics and optical instruments - Accuracy of optical transfer function (OTF) measurement.) |
| NF S10-045-1999 |
光學和光學儀器.普通光學試驗方法.成象場中有關光輝的測量 |
(Optics and optical instruments - General optical test methods - Measurement of relative irradiance in the image field.) |
| NF S10-046-2003 |
光學和光學儀器.測定光學件表面缺陷的試驗方法 |
(Optic and optical instruments - Test methods for surface imperfections of optical elements.) |
| NF S10-051-2002 |
光學和光學儀器.光學系統質量評估光.由于色彩退色產生的呈像質量下降評估 |
(Optics and optical instruments - Quality evaluation of optical systems - Assessing the image quality degradation due to chromatic aberrations.) |
| NF S10-100-1994 |
激光和相關設備.激光裝置.文獻的最低要求(EN 32152) |
(LASERS AND LASER-RELATED EQUIPMENT. LASER DEVICE. MINIMUM REQUIREMENTS FOR DOCUMENTATION. (EUROPEAN STANDARD EN 31252).) |
| NF S10-101-1994 |
激光和相關設備.激光裝置.機械接口(EN 31253) |
(LASERS AND LASER-RELATED EQUIPMENT. LASER DEVICE. MECHANICAL INTERFACES. (EUROPEAN STANDARD EN 31253).) |
| NF S10-102-1997 |
光學和光學儀器.激光及激光相關設備.非電信激光設備用光纖連接器 |
(Optics and optical instruments. Lasers and laser-related equipment. Fibre optic connectors for non-telecommunication laser applications.) |
| NF S10-105-2002 |
光學和光學儀器.激光和激光相關設備.詞匯和符號 |
(Optics and optical instruments - Lasers and laser-related equipment - Vocabulary and symbols.) |
| NF S10-112-1-2000 |
激光和激光相關設備.光學表面的激光誘導損壞閾測定.第1部分:合在一起的試驗 |
(Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 1: 1 on 1 test.) |
| NF S10-112-2-2001 |
激光和激光相關設備.光學表面激光誘導損傷閾的測定.第2部分:S-on-1試驗 |
(Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 2 : S-on-1 test.) |
| NF S10-113-1997 |
光學和光學儀器.激光和與激光相關的設備.光學激光組件光吸收性測試 |
(Optics and optical instruments. Lasers and laser-related equipment. Test method for absorptance of optical laser components.) |
| NF S10-115-2003 |
光學和光學儀器.光學件散射輻射的試驗方法 |
(Optics and optical instruments - Test methods for radiation scattered by optical components.) |
| NF S10-121-2003 |
光學和光學儀器.激光和相關激光設備.激光束功率、能量和時間特征的試驗方法 |
(Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics.) |
| NF S10-122-2003 |
激光和激光設備.激光束參數的試驗方法:束定位穩定性 |
(Lasers and laser-related equipment - Test methods for laser beam parameters : Beam positional stability.) |
| NF S10-124-2000 |
光學和光學設備.激光和激光相關設備.激光束能量密度分布的試驗方法 |
(Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution.) |
| NF S10-128-2003 |
光學和光學儀器.激光和激光相關設備.激光器的壽命 |
(Optics and optical instruments - Lasers and laser-related equipments - Lifetime of lasers.) |
| NF S10-130-1-2001 |
集成光學.詞匯.第1部分:基本術語和符號 |
(Integrated optics - Vocabulary - Part 1 : basic terms and symbols.) |
| NF S10-130-2-2001 |
集成光學.詞匯.第2部分:用于分類的術語 |
(Integrated optics - Vocabulary - Part 2 : terms used in classification.) |
| NF S10-132-1-2002 |
微型透鏡陣列.第1部分:詞匯 |
(Microlens array - Part 1 : vocabulary.) |
| NF S11-100-1988 |
光學和光學儀器.接觸透鏡.詞匯和符號 |
(OPTICS AND OPTICAL INSTRUMENTS. CONTACT LENSES. VOCABULARY AND SYMBOLS.) |
| NF S11-310-1999 |
眼科光學.條形碼規范(EN ISO 13230) |
(OPHTHALMIC OPTICS. BAR CODE SPECIFICATIONS. (EUROPEAN STANDARD EN ISO 13230).) |
| NF S11-400-1998 |
眼科光學.柔性焦距透鏡組.詞匯 |
(OPHTHALMIC OPTICS. SPECTACLE LENSES. VOCABULARY. (EUROPEAN STANDARD EN ISO 13666).) |
| NF S11-420-2003 |
眼科光學.眼鏡鏡片.未切精加工眼鏡片的基本要求 |
(Ophthalmic optics - Spectacle lenses - Fundamental requirements for uncut finished spectacle lenses.) |
| NF S11-421-1997 |
眼科光學.半成品眼鏡坯.第1部分:單光透鏡毛坯和多焦透鏡坯規范 |
(OPHTHALMIC OPTICS. SEMI-FINISHED SPECTACLE LENS BLANKS. PART 1 : SPECIFICATIONS FOR SINGLE-VISION AND MULTIFOCAL LENS BLANKS. (EUROPEAN STANDARD EN ISO 10322-1).) |
| NF S11-422-1997 |
眼科光學.半成品眼鏡鏡坯.第2部分:漸變眼鏡毛坯規范 |
(OPHTHALMIC OPTICS. SEMI-FINISHED SPECTACLE LENS BLANKS. PART 2 : SPECIFICATIONS FOR PROGRESSIVE POWER LENS BLANKS. (EUROPEAN STANDARD EN ISO 10322-2).) |
| NF S11-425-1999 |
眼科光學.未切割的成品透鏡片.第3部分:透光性能和試驗方法(EN ISO 8980-3) |
(OPHTHALMIC OPTICS. UNCUT FINISHED SPECTACLE LENSES. PART 3: TRANSMITTANCE SPECIFICATIONS AND TEST METHODS. (EUROPEAN STANDARD EN ISO 8980-3).) |
| NF S11-426-4-2000 |
眼科光學.未切割的成品柔性焦距透鏡組.第4部分:防反射涂層的規范和試驗方法 |
(Ophtalmic optics - Uncut finished spectacle lenses - Part 4 : specifications and test methods for anti-reflective coatings.) |
| NF S11-480-2003 |
眼科光學.試戴鏡規范 |
(Ophthalmic optics - Specifications for ready-to-wear spectacles.) |
| NF S11-500-1996 |
光學和光學儀器.眼鏡框架.等義術語表及詞匯 |
(Optics and optical instruments. Spectacle frames. Vocabulary and lists of equivalent terms.) |
| NF S11-510-1998 |
眼鏡科學.眼鏡鏡.一般要求和試驗方法 |
(Ophthalmic optics. Spectacle frames. General requirements and test methods.) |
| NF S11-520-2002 |
眼科光學.眼鏡架.測量系統和術語 |
(Ophthalmic optics - Spectacle frames - Measuring system and terminology.) |
| NF S11-530-1996 |
光學和光學儀器.眼科光學.眼鏡架標志 |
(Optics and optical instruments. Ophthalmic optics. Marking of spectacle frames.) |
| NF S11-540-1996 |
光學和光學儀器.眼科光學.支撐板 |
(Optics and optical instruments. Ophthalmic optics. Formers.) |
| NF S11-550-1996 |
光學和光學儀器.眼科光學.螺紋 |
(OPTICS AND OPTICAL INSTRUMENTS. OPHTHALMIC OPTICS. SCREW THREADS. (EUROPEAN STANDARD EN ISO 11381).) |
| NF S11-570-2001 |
眼科光學.眼科光學設備的信息交換 |
(Ophthalmic optics - Information interchange for ophthalmic optical equipment.) |
| NF S11-600-1-2003 |
接觸鏡片和接觸鏡片保護產品.詞匯.第1部分:接觸鏡片 |
(Contact lenses and contact lens care products - Vocabulary - Part 1 : contact lenses.) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com