標準號 |
中文名稱 |
英文名稱 |
| NF T57-215-1996 |
塑料管道系統.玻璃增強熱固性塑料管和配件接頭.撓性和鉸鏈接頭耐泄漏和損傷試驗方法 |
(Plastics piping systems. Joints for glass-reinforced thermosetting plastics (grp) pipes and fittings. Test methods for leaktightness and resistance to damage of flexible and reduced-articulation joints.) |
| NF T57-216-1996 |
塑料管道系統.玻璃增強熱固塑料管和配件.撓曲條件下部件內部耐化學侵蝕性的測定 |
Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes and fittings. Determination of the resistance to chemical attack from the inside of a section in a deflected condition. |
| NF T57-217-1996 |
塑料管道系統.玻璃纖維增強熱固性塑料管.潮濕條件下蠕變因子的測定和長期指定環的硬度的計算 |
Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Determination of the creep factor under wet conditions and calculation of the long-term specific ring stiffness. |
| NF T57-218-1996 |
塑料管道系統.玻璃纖維增強熱固塑料(GFK).檢驗原有環撓曲的試驗方法 |
Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Test method to prove the resistance to initial ring deflection. |
| NF T57-219-1999 |
塑料管道系統. 玻璃增強的熱固塑料管(GRP).在潮濕條件下長臨界相關環變形的測定(EN 1227) |
Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the long-term ultimate relative ring deflection under wet conditions. |
| NF T57-220-1996 |
塑料管道系統.玻璃纖維增強熱固性塑料(GRP)管.測定指定環初始硬度 |
Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Determination of initial specific ring stiffness. |
| NF T57-221-1996 |
塑料管道系統.玻璃纖維增強熱固塑料管和配件.短期內部壓力下管壁密封性的檢驗的試驗方法 |
Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes and fittings. Test methods to prove the leaktightness of the wall under short-term internal pressure. |
| NF T57-222-1996 |
塑料管道系統.玻璃纖維增強熱固塑料管.初始縱向拉伸性能的測定 |
Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Determination of initial longitudinal tensile properties. |
| NF T57-223-1996 |
塑料管道系統.玻璃增強熱固性塑料(GRP)管.初期表面抗拉強度的測定 |
Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Determination O the apparent initial circumferential tensile strength. |
| NF T57-224-1997 |
塑料管道系統.玻璃纖維增強熱固性塑料(GRP)構件.檢驗帶有彈性密封件的剛性鎖定的管套筒接頭設計的試驗方法 |
Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) components. Test methods to prove the design of rigid locked socket-and-spigot joints with elastomeric seals. |
| NF T57-225-1997 |
塑料管道系統.玻璃纖維增強熱固性塑料件.驗證膠合管套筒接頭設計的測試方法 |
Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) components. Test methods to prove the design of cemented socket-and-spigot joints. |
| NF T57-226 1-1999 |
1996年NF T 57-226的補充件1 |
|
| NF T57-226-1996 |
塑料管道系統.玻璃增強熱固性塑料部件.栓結法蘭聯軸節的設計驗證試驗方法 |
(Plastics piping systems. Glas-reinforced thermosetting plastics (grp) components. Test methods to prove the design of bolted flange joints.) |
| NF T57-226/A1-1999 |
NF EN 1450-1999的修改件1 |
() |
| NF T57-2261-1999 |
1996年NF T 57-226的補充件1 |
() |
| NF T57-227-1997 |
塑料管道系統.玻璃增強熱固性塑料(GRP)管.周期性內部壓力影響的試驗方法 |
(Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Test method for the effects of cyclic internal pressure.) |
| NF T57-229-1997 |
塑料管道系統.玻璃纖維增強熱固性塑料管.在化學環境下存放后相對彎曲蠕變系數的測定 |
(Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the relative flexural creep factor following exposure to a chemical environment.) |
| NF T57-303-1989 |
塑料.碳纖維增強復合材料.層間剪切應力的測定.短跨距彎曲的方法 |
(PLASTICS. CARBON REINFORCED COMPOSITES. DETERMINATION OF INTERLAMINAR SHEAR STRENGTH. FLEXURE METHOD WITH SHORT SPAN LENGHT.) |
| NF T57-402-1998 |
織物增強塑料復合物.通過加上最小45級拉力試驗方法對水平剪切應力/剪切拉力反應包括水平剪切模式和強度的測 |
(FIBRE-REINFORCED PLASTIC COMPOSITES. DETERMINATION OF THE IN-PLANE SHEAR STRESS/SHEAR STRAIN RESPONSE, INCLUDING THE IN-PLANE SHEAR MODULUS AND STRENGTH, BY THE PLUS OVER MINUS 45 DEGREES TENSION TEST METHOD. (EUROPEAN STANDARD EN ISO 14129).) |
| NF T57-404-2002 |
纖維增強塑料復合材料.無定向性增強材料的模型I層間斷裂韌度G |
(Fibre-reinforced composites - Determination of mode I interlaminar fracture toughness, Gic, for unidirectionally reinforced materials.) |
| NF T57-500-1989 |
塑料.聚酯膠片.術語定義和牌號的符號 |
(Plastics. Prepregs. Definitions of terms and symbols for designations.) |
| NF T57-502-1995 |
增強纖維.玻璃纖維.丙酮中溶解物百分率的測量.燒瓶法 |
(Reinforcement fibres. Glass fibre. Measurement of the percentage of soluble sizing in acetone. Flask method.) |
| NF T57-513-1973 |
玻璃織物增強塑料.聚酯樹脂預浸墊.塑性的測定 |
(PLASTICS MATERIALS REINFORCED WITH TEXTILE GLASS. PRE-IMPREGNATED MATS BASED ON POLYESTER RESINS. PLASTICITY.) |
| NF T57-514-1973 |
玻璃織物增強塑料.聚酯樹脂預浸墊.可模制性 |
(PLASTICS MATERIALS REINFORCED WITH TEXTILE GLASS. PRE-IMPREGNATED MATS BASED ON POLYESTER RESINS. MOULDABILITY.) |
| NF T57-515-1973 |
玻璃織物增強塑料.聚酯樹脂預浸墊.膨脹性測定 |
(PRE-IMPREGNATED PRODUCTS BASED ON MATS MADE OF GLASS AND POLYESTER RESINS. MEASUREMENT OF EXPANSION.) |
| NF T57-530-1991 |
塑料.預浸漬.由BMC和DMC物質構成的鑄模用混合料 |
(PLASTICS. PREPREGS. BULK MOULDING COMPOUND (BMC) AND DOUGH MOULDING COMPOUND (DMC). BASIS FOR A SPECIFICATION.) |
| NF T57-540-1-2003 |
增強的熱塑性模塑復合材料.GMT規范.第1部分:名稱與符號 |
(Reinforced thermoplastic moulding compounds - Specification for GMT - Part 1 : designation.) |
| NF T57-540-2-2003 |
增強的熱塑性模塑復合材料.GMT規范.第2部分:試驗方法和一般要求 |
(Reinforced thermoplastic moulding compounds - Specification for GMT - Part 2 : methods of test and general requirements.) |
| NF T57-540-3-2003 |
增強的熱塑性模塑復合材料.GMT規范.第3部分:特定要求 |
(Reinforced thermoplastic moulding compounds - Specification for GMT - Part 3 : specific requirements.) |
| NF T57-555-1973 |
玻璃織物增強塑料.環氧樹脂預浸織物.拉力和剪力方法測定對銅的附著力 |
(PRE-IMPREGNATED GLASS FABRICS BASED ON EPOXY RESINS : DETERMINATION OF ADHESION ON COPPER BY A METHOD INVOLVING SHEARING UNDER TRACTION.) |
| NF T57-556-1973 |
玻璃織物增強塑料.預浸玻璃織物.加壓和焙燒后預浸層厚度的測定 |
(PRE-IMPREGNATED GLASS FABRICS. DETERMINATION OF THE THICKNESS OF A LAYER OF PRE-IMPREGNATED PRODUCT AFTER PRESSING AND CURING.) |
| NF T57-557-1973 |
玻璃織物增強塑料.預浸玻璃織物.焙燒損失的測定 |
(PRE-IMPREGNATED GLASS FABRICS. DETERMINATION OF LOSS THROUGH CALCINATION.) |
| NF T57-559-1975 |
玻璃織物增強塑料.環氧樹脂預浸玻璃織物.粘合時間 |
(PLASTICS MATERIALS REINFORCED WITH TEXTILE GLASS - PRE IMPREGNATED GLASS FABRICS BASED ON EPOXY RESINS - BINDING TIME.) |
| NF T57-571-1984 |
玻璃織物增強塑料.預浸件.臺布.紗、壓層件.焙燒損失的測定 |
(GLASS FIBRE REINFORCED PLASTICS. PREIMPREGNATED MATS,YARNS AND ROVINGS. DETERMINATION OF IGINITION LOSS.) |
| NF T57-608-1999 |
纖維增強塑料.模壓化合物和聚酯膠片.樹脂、增強纖維和礦物填料含量的測定.溶解方法 |
(Fibre-reinforced plastics. Moulding compounds and prepregs. Determination of resin, reinforced-fibre and mineral-filler content. Dissolution methods.) |
| NF T57-615-1997 |
纖維增強塑料.熱固模塑混合物和預浸料.流動性和貯藏壽命的測定(歐洲標準EN ISO 12115) |
(FIBRE-REINFORCED PLASTICS. THERMOSETTING MOULDING COMPOUNDS AND PREPREGS. DETERMINATION OF FLOWABILITY AND SHELF LIFE. (EUROPEAN STANDARD EN ISO 12115).) |
| NF T57-616-2001 |
復合材料.預浸料坯.樹脂流測定 |
(Composites - Prepregs - Determination of resin flow.) |
| NF T57-800-1-2003 |
增強塑料復合材料.擠拉制型材規范.第1部分:命名 |
(Reinforced plastics composites - Specifications for pultruded profiles - Part 1 : designation.) |
| NF T57-800-2-2003 |
增強塑料復合材料.擠拉制型材規范.第2部分:試驗方法和一般要求 |
(Reinforced plastics composites - Specifications for pultruded profiles - Part 2 : methods of test and general requirements.) |
| NF T57-800-3-2003 |
增強塑料復合材料.擠拉制型材規范.第3部分:特殊要求 |
(Reinforced plastics composites - Specifications for pultruded profiles - Part 3 : specific requirements.) |
| NF T57-900-1987 |
增強塑料物質制貯器和設備結構規定 |
(GLASS-REINFORCED PLASTIC TANKS AND APPARATUS. CONSTRUCTION CODE.) |
| NF T57-901-1997 |
玻璃纖維增強塑料(GRP)制地下油罐.單面處于液體環境的試驗方法 |
(Underground tanks of glass-reinforced plastics (GRP). Method for one side exposure to fluids.) |
| NF T57-902-1997 |
玻璃纖維增強塑料(GRP)制地下油罐.系數α和β的測定 |
(Underground tanks of glass-reinforced plastics (GRP). Determination of factor alpha and factor beta.) |
| NF T58-000-1987 |
塑料.(熱固塑料和熱塑)塑料模制件適用公差 |
(Plastics. Tolerances applicable to the plastics moulded parts (thermosetting and thermoplastic).) |
| NF T58-003-1994 |
塑料.熱塑材料取樣用壓模 |
(Plastics. Compression moulding test specimens of thermoplastic materials.) |
| NF T58-003-2003 |
塑料.熱塑材料的壓塑試樣 |
(Plastics - Compression moulding test specimens of thermoplastic materials.) |
| NF T58-004-1997 |
塑料.多用途試驗用試樣 |
(Plastics. Multipurpose-test specimens.) |
| NF T58-005-1998 |
塑料.熱固性材料試樣的壓縮模制 |
(Plastics. Compression moulding of test specimens of thermosetting materials.) |
| NF T58-100-1971 |
塑料.金屬表面涂層.干法塑料.涂層規范形式 |
(PLASTICS MATERIALS. SURFACE COATING OF METALS. PLASTICS COATINGS.(DRY APPLICATION). SPECIFICATION.) |
| NF T58-110-1971 |
塑料.金屬表面涂層.干法塑料涂層.厚度檢驗 |
(PLASTICS MATERIALS. SURFACE COATING OF METALS. PLASTICS COATINGS. METHODS OF THICKNESS DETERMINATION.) |
| NF T58-112-1971 |
金屬表面涂層.塑料涂層.剝離法檢驗附著力 |
(PLASTICS MATERIALS. SURFACE COATING OF METALS. PLASTICS COATINGS. ADHESION TEST.) |
| NF T58-202-1-2000 |
焊接固定常壓熱塑性槽罐.第1部分:總則 |
(Welded static non-pressurised thermoplastic tanks - Part 1 : general principles.) |
| NF T58-202-2-2000 |
焊接固定常壓熱塑性槽罐.第2部分:立式圓柱形槽罐的計算 |
(Welded static non-pressurised thermoplastic tanks - Part 2 : calculation of vertical cylindrical tanks.) |
| NF T58-202-3-2000 |
焊接固定常壓熱塑性槽罐.第3部分:單層壁的長方形槽罐的設計和計算 |
(Welded static non-pressurised thermoplastic tanks - Part 3 : design and calculation for single skin rectangular tanks.) |
| NF T58-202-4-2000 |
焊接固定常壓熱塑性槽罐.第4部分:法蘭連接的設計和計算 |
(Welded static non-pressurised thermoplastic tanks - Part 4 : design and calculation of flanged joints.) |
| NF T60-100-1996 |
石油產品.透明和不透明液體.運動粘度的測定和動力粘性的計算 |
(Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity.) |
| NF T60-101-1998 |
原油和液體石油產品.密度的實驗室測定.密度計法 |
(Crude petroleum and liquid petroleum products. Laboratory determination of density. Hydrometer method.) |
| NF T60-102-1996 |
潤滑脂.滴點測定 |
(Lubricating greases. Determination of the dropping point.) |
| NF T60-103-1968 |
石油產品.潤滑脂和燃燒油在密封容器中閃點的測定 |
(PETROLEUM PRODUCTS. CLOSED CUP FLASH POINT OF LUBRICANTS AND FUEL OILS.) |
| NF T60-104-1998 |
石油產品.顏色的測定(ASTM刻度) |
(Petroleum products. Determination of colour (ASTM scale).) |
| NF T60-105-1996 |
石油產品.流點測定 |
(Petroleum products. Determination of pour point.) |
| NF T60-106-2001 |
液態石油產品.未用和使用過的潤滑油中雜質、磨損金屬和添加素的測定.感應耦合等離子體原子發射光譜法(ICP |
(Liquid petroleum products - Determination of additive elements, wear metals and contaminants in unused and used lubricating oils - Method by inductively coupled plasma atomic emission spectroscopy (IC) |
| NF T60-107-1999 |
玻璃毛細動態粘度計.規范和操作說明 |
(Glass capillary kinematic viscometers. Specifications and operating instructions.) |
| NF T60-109-1970 |
石油產品.爆炸法測定石油產品和潤滑脂中硫的含量 |
(PETROLEUM PRODUCTS. DETERMINATION OF SULPHUR IN PETROLEUM PRODUCTS AND LUBRICANTS BY THE BOMB METHOD.) |
| NF T60-110-1-2000 |
石油產品.皂化值的測定.第1部分:顏色指示劑滴定法 |
(Petroleum porducts - Determination of saponification number - Part 1 : colour-indicator titration method.) |
| NF T60-110-2-2000 |
石油產品.皂化值的測定.第2部分:電勢滴定法 |
(Petroleum products - Determination of saponification number - Part 2 : potentiometric titration method.) |
| NF T60-111-1999 |
石油基潤滑油.老化特性.用康拉孫(法)測定氧化后殘?zhí)嫉淖兓?/td>
| (Petroleum-based lubricating oils - Ageing characteristics - Determination of change in Conradson carbon residue after oxidation.) |
| NF T60-112-1997 |
石油產品和潤滑劑.酸值和堿值的測定.彩色指示劑滴定法 |
(Petroleum products and lubricants. Determination of acid or base number. Colour-indicator titration method.) |
| NF T60-113-1986 |
石油產品.水含量的測定.蒸餾法 |
(Petroleum products. Determination of water content. Distillation method.) |
| NF T60-114-1970 |
石油產品.石蠟熔點的測定 |
(PETROLEUM PRODUCTS. MELTING POINT OF PARAFFINS.) |
| NF T60-115-1982 |
石油產品.用標準正庚烷測定沉淀瀝青 |
(PETROLEUM PRODUVTS. DETERMINATION OF ASPHALTENES PRECIPITATED BY NORMAL HEPTANE.) |
| NF T60-116-2002 |
石油產品.碳?xì)堅臏y(cè)定.康拉遜(Conoadson)法 |
(Petroleum products - Determination of carbon residue - Conradson method.) |
| NF T60-117-1982 |
石油產品.蘭氏殘?zhí)康臏y(cè)定 |
(Petroleum products. Determination of the ramsbottom residue .) |
| NF T60-118-2001 |
閃點和燃點的測定.克利弗蘭得(Cleveland)開杯法 |
(Determination of flash and fire points - Cleveland open cup method.) |
| NF T60-119-2003 |
石油產品.石蠟產品錐入度的測定 |
(Petroleum products - Determination of cone penetrability of paraffinic products.) |
| NF T60-120-1972 |
石油產品.石油的蠟和石蠟中油含量的測定 |
(DETERMINATION OF OIL CONTENT IN PARAFFINS AND PETROLEUM WAXES.) |
| NF T60-121-1976 |
石油產品.礦脂、原礦脂和石油蠟常規焙點的測定 |
(DETERMINATION OF THE CONVENTIONAL MELTING POINT OF PETROLEUM JELLY,CRUDE PETROLEUM JELLY AND PETROLEUM WAX.) |
| NF T60-121-2003 |
石油產品.石油蠟和礦脂常規溶點的測定 |
(Petroleum products - Determination of the conventional melting point of petroleum waxes and petroleum jellies.) |
| NF T60-123-1972 |
石油產品.石蠟和蠟針入度的測定 |
PETROLEUM PRODUCTS. DETERMINATION OF NEEDLE PENETRATION OF PARAFFINS AND WAXES. |
| NF T60-124-1959 |
石油和石油產品.石蠟和石油蠟含量的測定.硬過濾器等直徑孔測量法 |
(PETROLEUMS AND DERIVATIVES. OIL CONTENT OF PARAFFINS AND PETROLEUM WAXES. METHOD OF MEASURING THE EQUIVALENT DIAMETER OF PORES OF RIGID FILTERS.) |
| NF T60-125-1979 |
石油產品.渦輪機油的反乳化 |
(PETROLEUM PRODUCTS. DE EMULSION OF TURBINE OILS.) |
| NF T60-125-2001 |
石油產品.礦物油和合成液體水分離性的測定 |
(Petroleum products - Determination of water separability of petroleum oils and synthetic fluids.) |
| NF T60-126-1999 |
石油產品.礦物油.油對水界面張力的測定.圓環法 |
(Petroleum products - Mineral oils - Determination of interfacial tension of oil against water - Ring method.) |
| NF T60-127-1974 |
石油產品.石油蠟和石蠟抗控強度的測定 |
(TENSILE STRENGTH OF PARAFFIN WAX.) |
| NF T60-128-1974 |
石油產品.石蠟、蠟、礦脂和礦脂蠟?zāi)c(diǎn)的測定 |
(Congelating point of petroleum waxes, including petrolatum.) |
| NF T60-129-1998 |
石油產品.潤滑油發泡特性的測定 |
(Petroleum products. Determination of foaming characteristics of lubricating oils.) |
| NF T60-133-1988 |
石油產品.潤滑脂的游離酸度和堿度 |
(PETROLEUM PRODUCTS. ACIDITY AND ALKALINITY OF LUBRICANT GREASES.) |
| NF T60-134-2000 |
蠟和石蠟.石蠟中可碳化物質(定性試驗) |
(Waxes and paraffin waxes - Carbonizable substances in paraffin wax (qualitative test).) |
| NF T60-135-1998 |
石油產品和潤滑劑.潤滑油的防銹特性的測定 |
(Petroleum products and lubricants. Determination of rust-prevention characteristics of lubricating greases.) |
| NF T60-136-1979 |
石油產品.由運動粘度計算粘度指數 |
(PETROLEUM PRODUCTS. CALCULATION OF VISCOSITY INDEX FROM KINEMATIC VISCOSITY.) |
| NF T60-138-2004 |
石油及相關產品.與熱表層接觸的流體易燃性特征的測定.歧管點火試驗 |
(Petroleum and related products - Determination of flammability characteristics of fluids in contact with hot surfaces - Manifold ignition test.) |
| NF T60-139-1970 |
石油產品.潤滑脂的表視粘度 |
(INDUSTRIAL OILS AND GREASES. APPARENT VISCOSITY OF LUBRICATING GREASE.) |
| NF T60-140-1974 |
石油產品.用四分之一或二分之一標度錐測定潤滑脂的針入度 |
(CONE PENETRATION OF LUBRICATION GREASE USING ONE-QUARTER OR ONE-HALF SCALE CONE EQUIPMENT.) |
| NF T60-141-1993 |
工業液體潤滑劑.ISO粘度分類 |
(Industrial liquid lubricants. ISO viscosity classification.) |
| NF T60-142-1994 |
石油產品和烴類.硫含量的測定.威克波耳德(Wickbold)燃燒法 |
(Petroleum products and hydrocarbons. Determination of sulfur content. Wickbold combustion method.) |
| NF T60-144-1974 |
石油產品.潤滑脂中硫灰分的測定 |
(DETERMINATION OF SULFATED ASH FROM GREASES.) |
| NF T60-147-2003 |
石油產品.石蠟產品軟化點的測定.環法和球法 |
(Petroleum products - Determination of softening point of paraffin products - Ring and ball method.) |
| NF T60-148-1976 |
石油產品.液態石油產品的粘度一溫度圖表 |
(VISCOSITY-TEMPERATURE CHARTS FOR LIQUID PETROLEUM PRODUCTS.) |
| NF T60-148-2003 |
液態石油產品.按照溫度測定運動粘度 |
(Liquid petroleum products - Determination of the kinematic viscosity according to the temperature.) |
| NF T60-149-1999 |
石油和相關產品.蒸汽透平油和其他油品空氣釋放特性的測定.撞擊法 |
(Petroleum and related products - Determination of air-release properties of steam turbine and other oils - Impinger method.) |
| NF T60-150-1979 |
石油產品.加抗氧化劑渦輪機油的氧化穩定性 |
(PETROLEUM PRODUCTS. OXIDATION STABILITY OF INHIBITED TURBINE OILS.) |
| NF T60-151-1979 |
石油產品.有水時渦輪機油防銹特性的評定 |
(PETROLEUM PRODUCTS. ASSESSMENT OF RUST-PREVENTING CHARACTERISTICS OF TURBINE OIL IN THE PRESENCE OF WATER.) |
| NF T60-152-1979 |
石油產品.用BROOKFIELD粘度計測定低溫粘度.液浴法 |
(PETROLEUM PRODUCTS. MEASUREMENT OF THE VISCOSITY AT LOW TEMPERATURES USING A BROOKFIELD VISCOSITY METER. LIQUID BATH METHOD.) |
| NF T60-153-1979 |
石油產品.石蠟混合物濁點的測定 |
(PETROLEUM PRODUCTS. DETERMINATION OF THE CLOUD POINT OF PARAFFIN) |
| NF T60-154-2001 |
石油產品.水分測定.卡爾. 費休滴定法 |
(Petroleum products - Determination of water - Potentiometric Karl Fischer titration method.) |
| NF T60-155-1984 |
石油產品.橡膠庥業用石油增塑劑烴類的測定.粘土和硅膠吸收色譜法 |
(PETROLEUM PRODUCTS. DETERMINATION OF HYDROCARBON GROUPS IN PETROLEUM PLASTICIZERS USED IN THE RUBBER INDUSTRY. CLAY-SILICA GEL ADSORPTION CHROMATOGRAPHIC METHOD.) |
| NF T60-156-1982 |
石油產品.不加抗氧劑的新渦輪機油的抗乳化指數.水蒸氣試驗 |
(PETROLEUM PRODUCTS. DESEMULSIFICATION NUMBER OF NEW NON INHIBITED TURBINE OILS. WATER VAPOUR TEST.) |
| NF T60-157-1982 |
石油產品.潤滑油中不溶物質的含量 |
(PETROLEUM PRODUCTS. INSOLUBLES CONTENT OF LUBRICATING OILS.) |
| NF T60-158-1982 |
無添加劑純石蠟氣味的測定 |
(DETERMINATION OF THE ODOUR OF PURE PARAFFINS FREE FROM ADDITIVES.) |
| NF T60-159-1994 |
暫時防蝕產品.用浸漬法測定脫脂性能 |
(TEMPORARY ANTICORROSION PRODUCTS. DEGREASING ABILITY BY DIPPING.) |
| NF T60-162-1985 |
潤滑劑、工油和類似產品(L類).分類.O部分: 綜合 |
(LUBRICANTS,INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L). CLASSIFICATION. PART 0 : GENERAL.) |
| NF T60-163-1985 |
潤滑劑.工業油和類似產品(L類).分類.第1部分: A類(潤滑損耗) |
(LUBRICANTS,INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L). CLASSIFICATION. PART 1 : FAMILY A (TOTAL LOSS SYSTEM).) |
| NF T60-164-1985 |
潤滑劑、工業油和類似產品(L類).分類.第2部分: F類(主軸軸承.軸承和亮合離合器 (LUBRICANTS,INDUSTRIAL OIL |
(SPINDLE BEARINGS AND ASSOCIATED CLUTCHES).) |
| NF T60-165-1994 |
暫時防蝕產品.指紋抵消特性 |
(TEMPORARY PROTECTION AGAINST CORROSION. FINGER PRINT NEUTRALIZATION PROPERTIES.) |
| NF T60-166-1994 |
暫時防蝕產品.防腐產品特性評定用金屬探測器的制備方法 |
(TEMPORARY PROTECTION AGAINST CORROSION. METHOD OF PREPARE METALLIC PROBES FOR THE EVALUATION OF THE PROPERTIES OF PRESERVATIVE PRODUCTS.) |
| NF T60-167-1994 |
暫時防蝕產品.儲藏穩定性(循環條件下) |
(TEMPORARY PROTECTION AGAINST CORROSION. STORAGE STABILITY (CYCLIC CONDITIONS).) |
| NF T60-168-1994 |
暫時防蝕產品.防蝕性和排水量的特點 |
(TEMPORARY ANTICORROSION PRODUCTS. ANTICORROSION AND WATER DISPLACEMENT CHARACTERISTICS.) |
| NF T60-170-1994 |
暫時防蝕產品.用浸漬法對覆蓋能力的評定 |
(TEMPORARY ANTICORROSION PRODUCTS. ASSESSMENT OF THE COVERING CAPACITY BY DIPPING.) |
| NF T60-171-1986 |
石油產品.低溫下潤滑脂錐面的錐入滲透度 |
(PETROLEUM PRODUCTS. DETERMINATION OF CONE PENETRATION OF GREASES UNDER LOW TEMPERATURE.) |
| NF T60-172-1996 |
原油和石油產品.密度測定.振蕩U形管法 |
(Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method.) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com