標準號 |
中文名稱 |
英文名稱 |
| NF C28-918/A1-2002 |
磁性材料.第4部分:軟磁材料的直流磁特性測量方法 |
(Magnetic materials - Part 4 : methods of measurement of d.c. magnetic properties of magnetically soft materials.) |
| NF C28-920-1996 |
顆粒結構定向最終退火狀態下的電工鋼片和鋼帶 |
(Grain-oriented electrical steel sheet and strip delivered in the fully processed state.) |
| NF C28-921-2003 |
磁性材料.開路中磁性材料矯頑力的測量方法 |
(Magnetic materials - Method of measurement of the coercivity of magnetic materials in an open circuit.) |
| NF C28-925-1996 |
非最終退火裝態下非合金鋼制冷軋電工鋼片和鋼帶 |
(Cold rolled electrical non-alloyed steel sheet and strip delivered in the semi-processed state.) |
| NF C28-926-1996 |
非最終退火裝態下合金鋼制冷軋電工鋼片和鋼帶 |
(Cold rolled electrical alloyed steel sheet and strip delivered in the semi-processed state.) |
| NF C28-930-1983 |
冶金產品.變壓器磁路用切割鋼板.無消耗切割 |
(IRON AND STEEL, MAGNETIC STEEL SHEET FOR TRANSFORMER MAGNETIC CIRCUITS. WASTELESS CUTTING.) |
| NF C28-931-1998 |
磁性材料.第2部分:用Epstein框架法對電氣鋼薄板材和帶材磁特性的測定方法 |
(Magnetic materials. Part 2 : methods of measurement of the magnetic properties of electrical steel sheet and strip by means of an Epstein frame.) |
| NF C28-936-2003 |
磁性材料.燒結的軟磁性材料規范 |
(Magnetic materials - Specification for sintered soft magnetic materials.) |
| NF C28-940-2001 |
在中等頻率的薄磁鋼帶 |
(Thin magnetic steel strip for use at medium frequencies.) |
| NF C28-941-1997 |
磁性材料.薄板材和帶材的機械特性和磁導率的規范 |
(Magnetic materials. Specification for steel sheet and strip with specified mechanical properties and magnetic permeability.) |
| NF C30-010-1930 |
導體導線退火的銅型材.規范 |
(CONDUCTORS. STANDARD ANNEALED COPPER : SPECIFICATION.) |
| NF C30-101-2003 |
電纜及其附件的沖擊電壓試驗 |
(Impulse tests on cables and their accessories.) |
| NF C30-201-2001 |
電纜芯的識別登記標記 |
(Marking by inscription for the identification of cores of electric cables.) |
| NF C30-202-2000 |
電纜命名系統 |
(System for cable designation.) |
| NF C30-2021-1990 |
C 30-202-87的補充1 |
() |
| NF C30-2026-1993 |
導線和絕緣電纜.導線和電纜的命名系統.補充件6 |
() |
| NF C30-203-1994 |
導線和絕緣電纜.導線和絕線電纜的尺寸特性測定.計算方法 |
(Insulated cables and flexible cords. Determination of dimensions of insulated cables and flexible cords calculation methods.) |
| NF C30-204-1988 |
導線和絕緣電纜.電纜標記 |
(INSULATED CABLES AND FLEXIBLE CORDS. MARKING OF CABLES.) |
| NF C30-204/A1-1991 |
NF C 30-204-1988的補充件1 |
() |
| NF C30-2041-1991 |
C30-204-88的補充1 |
() |
| NF C30-205-1994 |
額定電壓450/750V(含)以下的圓銅導體電纜平均外徑尺寸上限和下限的計算 |
(Calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V.) |
| NF C30-400-2003 |
地下管道和電纜用電磁波探測器.性能和安全 |
(Electromagnetic locators for buried pipes and cables - Performance and safety.) |
| NF C31-001-2000 |
特種繞組線規范.第0部分:一般要求.第1節:漆包圓銅線 |
(Specifications for particular types of winding wires - Part 0 : general requirements - Section 1 : enamelled round copper wire.) |
| NF C31-001/A1-2001 |
特種繞組線規范.第0-1部分:一般要求.漆包圓銅線 |
(Specifications for particular types of winding wires - Part 0-1 : general requirements - Enamelled round copper wire.) |
| NF C31-0012-1995 |
NF C31-001 95年5月的補充件2 |
() |
| NF C31-002-2000 |
特種繞組線規范.第0部分:一般要求.第2節:漆包扁銅線 |
(Specifications for particular types of winding wires - Part 0 : general requirements - Section 2 : enamelled rectangular copper wire.) |
| NF C31-002/A1-2001 |
特種繞組線規范.第0-2部分:一般要求.漆包扁銅線 |
(Specifications for particular types of winding wires - Part 0-2 : general requirements - Enamelled rectangular copper wire.) |
| NF C31-0022-1995 |
NF C31-002 95年5月的補充件2 |
() |
| NF C31-003-2000 |
特種繞組線規范.第0部分:一般要求.第3節:漆包圓鋁線 |
(Specification for particular types of winding wires - Part 0 : general requirements - Section 3 : enamelled round aluminium wire.) |
| NF C31-003/A1-2001 |
特種繞組線規范.第0-3部分:一般要求.漆包圓鋁線 |
(Specifications for particular types of winding wires - Part 0-3 : general requirements - Enamelled round aluminium wire.) |
| NF C31-0031-1995 |
NF C31-003 95年5月的補充件1 |
() |
| NF C31-0032-1995 |
NF C31-003 95年5月的補充件2 |
() |
| NF C31-004-2000 |
特種繞組線規范.第0部分:一般要求.第4節:玻璃纖維繞組樹脂或清漆浸漬的裸銅線或漆包扁銅線 |
(Specifications for particular types of winding wires - Part 0 : general requirements - Section 4 : glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire.) |
| NF C31-004/A1-2001 |
特種繞組線規范.第0-4部分:一般要求.玻璃纖維繞組樹脂或清漆浸漬裸銅線或漆包扁銅線 |
(Specifications for particular types of winding wires - Part 0-4 : general requirements Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire.) |
| NF C31-0042-1995 |
NF C31-004 95年5月的補充件2 |
() |
| NF C31-005-2000 |
特種繞組線規范.第0部分:一般要求.第5節:帶玻璃纖維保護層的樹脂或清漆浸漬的裸的或漆包扁銅線 |
(Specifications for particular types of winding wires - Part 0 : general requirements - Section 5 : glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire.) |
| NF C31-006-2002 |
特種繞組線規范.第0-6部分:一般要求.玻璃絲繞包樹脂或漆浸漬裸或漆包圓銅線 |
(Specifications for particular types of winding wires - Part 0-6 : general requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire.) |
| NF C31-023-1-1997 |
繞線.試驗方法.第1部分:總則 |
(Winding wires. Test methods. Part 1 : general.) |
| NF C31-023-2-1998 |
繞阻線.試驗方法.第2部分:尺寸的測定 |
(Winding wires. Test methods. Part 2 : determination of dimensions.) |
| NF C31-023-2/A1-1998 |
NF EN 60851-2-1998的修改1 |
() |
| NF C31-023-21-1998 |
NF C31-023-2 98年2月的補充件1 |
() |
| NF C31-023-3-1998 |
繞阻線.試驗方法.第3部分:機械性能 |
(Winding wires. Test methods. Part 3 : mechanical properties.) |
| NF C31-023-3/A1-1998 |
NF EN 60851-3-1998的修改1 |
() |
| NF C31-023-31-1998 |
NF C31-023-3 98年2月的補充件1 |
() |
| NF C31-023-4-1998 |
繞組線.試驗方法.第4部分:化學特性 |
(Winding wires. Test methods. Part 4 : chemical properties.) |
| NF C31-023-4/A1-1998 |
NF EN 60851-4-1998的修改1 |
() |
| NF C31-023-41-1998 |
NF C31-023-4-98的補充件1 |
() |
| NF C31-023-5-1998 |
繞阻線.第5部分:電性能 |
(Winding wires. Test methods. Part 5 : electrical properties.) |
| NF C31-023-5/A1-1998 |
NF EN 60851-5-1998的修改1 |
() |
| NF C31-023-51-1998 |
NF C31-023-5 98年2月的補充件1 |
() |
| NF C31-023-6-1998 |
繞阻線.試驗方法.第6部分:熱特性 |
(Winding wires. Test methods. Part 6 : thermal properties.) |
| NF C31-023-6/A1-1998 |
NF EN 60851-6-1998的修改1 |
() |
| NF C31-023-61-1998 |
NF C 31-023-6的補充件1 |
() |
| NF C31-091-1995 |
繞組線的封裝.第1部分:圓繞組線線筒 |
(Packaging of winding wires. Part 1 : containers for round winding wires.) |
| NF C31-092-1-1995 |
繞組線的封裝.第2部分:圓桶形輸出線軸.第1節:基本尺寸 |
(Packaging of winding wires. Part 2 : cylindrical barrelled delivery spools. Section 1 : basic dimensions.) |
| NF C31-092-2-1995 |
繞組線的封裝.第2部分:圓桶形輸出線軸.第2節:由熱塑性材料制成的可回收使用的繞線軸規范 |
(Packaging of winding wires. Part 2 : cylindrical barreled delivery spools. Section 2 : specification for returnable spools made from thermoplastic material.) |
| NF C31-092-3-1995 |
繞組線的封裝.第2部分:圓桶形輸出線軸.第3節:由熱塑性材料制成的不能回收使用的繞線軸規范 |
(Packaging of windings wires. Part 2 : cylindrical barrelled delivery spools. Section 3 : specification for non-returnable sppols made from thermplastic material.) |
| NF C31-093-1-2002 |
繞組線的封裝.第3-1部分:錐形輸出線軸.基本尺寸 |
(Packaging of winding wires - Part 3-1 : taper barelled delivery spools - Basic dimensions.) |
| NF C31-093-2-2001 |
繞組線的封裝.第3-2部分:錐形輸出線軸.由熱塑性材料制的可回收使用的繞線軸規范 |
(Packaging of winding wires - Part 3-2 : taper barrelled delivery spools - Specification for returnable spools from thermoplastic materials.) |
| NF C31-093-3-1996 |
繞組線的包裝.第3部分:圓錐型筒裝交貨線盤.第3節:熱塑性材料不可回收線盤規范 |
(Packaging of winding wires. Part 3 : taper barrelled delivery spools. Section 3 : specification for non-returnable spools made from thermoplastic material.) |
| NF C31-093-4-2001 |
繞組線的封裝.第3-4部分:錐形輸出線軸.錐形輸出線軸封裝物的基本尺寸 |
(Packaging of winding wires - Part 3-4 : taper barelled delivery spools - Dimensions of containers for taper barelled delivery spools.) |
| NF C31-093-5-2001 |
繞組線的封裝.第3部分:錐形輸出線軸.由熱塑性材料制成的繞線軸封裝物規范 |
(Packaging of winding wires - Part 3 : taper barelled delivery spools - Specification for spool containers made form thermoplastic material.) |
| NF C31-094-1-1996 |
繞組線的封裝.第4部分:試驗方法.第1節:熱塑性材料制成的輸出線軸 |
(Packaging of windings wires. Part 4 : methods of test. Section 1 : delivery sppols made from thermplastic material.) |
| NF C31-094-2-1995 |
繞組線的封裝.第4部分:試驗方法.第2節:熱固性塑料制成的錐形筒式供帶盤容器 |
(Packaging of winding wires. Part 4 : methods of test. Section 2 : containers made from thermoplastic material for taper barrelled delivery spools.) |
| NF C31-095-1-1998 |
繞組線的包裝.第5部分第1節:裝入桶內的圓柱形帶錐形法蘭供帶盤(歐洲標準EN 60 264-5-1) |
(Packaging of winding wires. Part 5-1 : cylindrical barrelled delivery spools with conical flanges. Basic dimensions.) |
| NF C31-095-2-2002 |
繞組線的包裝.第5-2部分:圓錐形筒裝交貨線盤.熱塑材料可回收片盤規范 |
(Packaging of winding wires - Part 5-2 : cylindrical barrelled delivery spools wire conical flanges - Specification for returnable spools made from thermoplastic material.) |
| NF C31-122-1980 |
電氣構件中的導體.圓截面四分之三冷鍛硬裸鋁線.特性 |
(WIRES FOR ELECTRICAL MACHINERY AND APPARATUS. ROUND BARE 3/4 HARD ALUMINIUM WIRE. CHARACTERISTICS.) |
| NF C31-320M1-1967 |
電氣構件中的導體和導線.帶有包皮、編織物或絕緣帶的絕緣銅線 |
() |
| NF C31-410-1995 |
測定漆包繞組線溫度指數的試驗程序 |
(Test procedure for the determination of the temperature index of enamelled winding wires.) |
| NF C31-410/A1-2000 |
測定漆包繞組線溫度指數的試驗規程 |
(Test procedure for the determination of the temperature index of enamelled winding wires.) |
| NF C31-420-1977 |
電氣構件中的導體和導線.變壓器和類似裝置用高介電性能的圓截面漆包銅線 |
(WIRES FOR ELECTRICAL MACHINERY AND APPARATUS. ENAMELLED ROUND COPPER WIRES WITH HIGH DIELECTRIC PROPERTIES FOR TRANSFORMERS AND SIMILAR APPLICATIONS.) |
| NF C31-510-1976 |
開關板及電氣接線用扁平銅條 |
(FLAT COPPER BARS FOR SWITCHBOARDS AND ELECTRICAL WIRINGS (WITH SHARP OR ROUNDED EDGES).) |
| NF C31-520-1979 |
電路或儀表盤用鋁和鋁合金扁條線 |
(Flat aluminium and aluminium alloys bars for switchboards and electrical wirings (with rounded edges).) |
| NF C31-651-1995 |
特種繞組線規范.第1部分:聚乙烯醇乙醛漆包圓銅繞組線.105級 |
(Specifications for particular types of winding wires. Part 1 : polyvinyl acetal enamelled round copper wire, class 105.) |
| NF C31-651/A1-1998 |
NF EN 60317-1-1995的修改1 |
() |
| NF C31-651/A2-2001 |
特種繞組線規范.第1部分:聚乙烯醇乙醛漆包圓銅繞組線.105級 |
(Specifications for particular types of winding wires - Part 1 : polyvinyl acetal enamelled found copper wire, class 105.) |
| NF C31-6511-1998 |
NF C31-651-95的補充件1 |
() |
| NF C31-652-2001 |
特種繞組線規范.第2部分:帶粘合層的可焊接的聚氨基甲酸乙酯漆包圓銅繞組線,130級 |
(Specifications for particular types of winding wires - Part 2 : solderable polyurethane enamelled round copper wire, class 130, with a bonding layer.) |
| NF C31-653-1995 |
特種繞組線規范.第3部分:聚酯漆包圓銅繞組線,155級 |
(Specifications for particular types of winding wires. Part 3 : polyester enamelled round copper wire, classe 155.) |
| NF C31-653/A1-2001 |
特種繞組線規范.第3部分:聚酯漆包圓銅繞組線.155級 |
(Specifications for particular types of winding wires - Part 3 : polyester enamelled round copper wire, class 155.) |
| NF C31-654-2001 |
特種繞組線規范.第4部分:可焊接的聚氨基甲酸乙酯漆包圓銅繞組線130級 |
(Specifications for particular types of winding wires - Part 4 : solderable polyurethane enamelled round copper wire, class 130.) |
| NF C31-657-1995 |
特種繞組線規范.第7部分:聚酰亞胺漆包圓銅繞組線,220級 |
(Specifications for particular types of winding wires. Part 7 : polyimide enamelled round copper wire, class 220.) |
| NF C31-657/A1-1998 |
NF EN 60317-7-1995的修改1 |
() |
| NF C31-657/A2-2002 |
特種繞組線規范.第7部分:聚酰亞胺漆包圓銅線 |
(Specifications for particular types of winding wires - Part 7 : polyimide enamelled round copper wire, class 220.) |
| NF C31-6571-1998 |
NF C31-657-95的補充件1 |
() |
| NF C31-658-1995 |
特種繞組線規范.第8部分:聚酰胺酯漆包圓銅繞組線,180級 |
(Specifications for particular types of winding wires. Part 8 : polyesterimide enamelled round copper wire, class 180.) |
| NF C31-658/A1-1998 |
NF EN 60317-8-1995的修改1 |
() |
| NF C31-658/A2-2001 |
特種繞組線規范.第8部分:聚酰胺酯漆包圓銅線,180級 |
(Specifications for particular types of winding wires - Part 8 : polyesterimide enamelled round copper wire, class 180.) |
| NF C31-6581-1998 |
NF C31-658-95的補充件1 |
() |
| NF C31-661-2001 |
特種繞組線規范.第11部分:130級絲包束狀可焊聚氨酯漆包圓銅線 |
(Specifications for particular types of winding wires - Part 11 : bunched solderable polyurethane enamelled round copper wires, class 130, with silk covering.) |
| NF C31-6611-1995 |
NF C31-661-95補充件1 |
() |
| NF C31-662-1995 |
特種繞組線規范.第12部分:聚乙烯醇乙醛漆包圓銅繞組線,120級 |
(Specifications for particular types of winding wires. Part 12 : polyvinyl acetal enamelled round copper wire, class 120.) |
| NF C31-662/A1-2001 |
特種繞組線規范.第12部分:聚乙烯醇乙醛漆包圓銅線,120級 |
(Specifications for particular types of winding wires - Part 12 : polyvinyl acetal enamelled round copper wire, class 120.) |
| NF C31-663-1995 |
特種繞組線規范.第13部分:用聚酰胺-酰亞胺涂覆聚酯或聚酰胺酯漆包的圓銅繞組線,200級 |
(Specifications for particular types of winding wires. Part 13 : polyester or polyesterimide overcoated with polyamide-imide.) |
| NF C31-663/A1-1998 |
NF EN 60317-13-1995的修改1 |
() |
| NF C31-663/A2-2001 |
特種繞組線規范.第13部分:用聚酰胺-酰亞胺涂覆聚酯或聚酰胺酯漆包的圓銅線,200級 |
(Specifications for particular types of winding wires - Part 13 : polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200.) |
| NF C31-6631-1998 |
NF C31-663-95的補充件1 |
() |
| NF C31-664-1995 |
特種繞組線規范.第14部分:105級聚乙烯醇乙醛漆包圓鋁繞組線 |
(Specifications for particular types of winding wires. Part 14 : polyvinyl acetal enamelled round aluminium wire, class 105.) |
| NF C31-664/A1-2001 |
特種繞組線規范.第14部分:聚乙烯醇漆絕緣的圓鋁線,等級105 |
(Specifications for particular types of winding wires - Part 14 : polyvinyl acetal enamelled round aluminium wire, class 105.) |
| NF C31-665-1995 |
特種繞組線規范.第15部分:180級聚酰胺酯漆包圓鋁繞組線 |
(Specifications for particular types of winding wires. Part 15 : polyesterimide enamelled round aluminium wire, class 180.) |
| NF C31-665/A1-2001 |
特種繞組線規范.第15部分:聚酰脂亞胺漆絕緣圓鋁線,等級180 |
(Specifications for particular types of winding wires - Part 15 : polyesterimide enamelled round aluminium wire, class 180.) |
| NF C31-666-1995 |
特種繞組線規范.第16部分:155級聚酯漆包扁銅繞組線 |
(Specifications for particular types of winding wires. Part 16 : polyester enamelled rectangular copper wire, class 155.) |
| NF C31-666/A1-2001 |
特種繞組線規范.第16部分:聚酯漆包扁銅線,155級 |
(Specifications for particular types of winding wires - Part 16 : polyester enamelled rectangular copper wire, class 155.) |
| NF C31-667-1995 |
特種繞組線規范.第17部分:105級聚乙烯醇乙醛漆包扁銅繞組線 |
(Specifications for particular types of winding wires. Part 17 : polyvinyl acetal enamelled rectangular copper wire, class 105.) |
| NF C31-667/A1-2001 |
特種繞組線規范.第17部分:105級聚乙烯醇乙醛漆包扁銅線 |
(Specifications for particular types of winding wires - Part 17 : polyvinyl acetal enamelled rectangular copper wire, class 105.) |
| NF C31-668-1995 |
特種繞組線規范.第18部分:聚乙烯醇乙醛漆包扁銅繞組線,120級 |
(Specifications for particular types of winding wires. Part 18 : polyvinyl acetal enamelled rectangular copper wire, class 120.) |
| NF C31-668/A1-2001 |
特種繞組線規范.第18部分:120級聚乙烯醇乙醛漆包扁銅線 |
(Specifications for particular types of winding wires - Part 18 : polyvinyl acetal enamelled rectangular copper wire, class 120.) |
| NF C31-669-2001 |
特種繞組線規范.第19部分:涂覆聚酰胺的可焊接聚氨基甲酸乙酯漆包圓銅繞組線,130級 |
(Specifications for particular types of winding wires - Part 19 : solderable polyurethane enamelled round copper wire overcoated with polyamide, class 130.) |
| NF C31-670-2001 |
特種繞組線規范.第20部分:聚氨基甲酸乙酯鍍鋅漆包圓銅繞組線,155級 |
(Specifications for particular types of winding wires - Part 20 : solderable polyurethane enamelled round copper wire class 155.) |
| NF C31-671-2001 |
特種繞組線規范.第21部分:涂覆聚酰胺的可焊接聚氨基甲酸乙酯漆包圓銅繞組線,155級 |
(Specifications for particular types of winding wires - Part 21 : solderable polyurethane enamelled round copper wire overcoated with polyamide, class 155.) |
| NF C31-672-1995 |
特種繞組線規范.第22部分:涂覆聚酰胺的聚酯或聚酰胺酯漆包圓銅繞組線,180級 |
(Specifications for particular types of winding wires. Part 22 : polyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180.) |
| NF C31-672/A1-2001 |
特種繞組線規范.第22部分:聚酰胺涂層的180級聚酯或聚酯亞胺漆包圓銅線 |
(Specifications for particular types of winding wires - Part 22 : polyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180.) |
| NF C31-673-1995 |
特種繞組線規范.第23部分:可焊接的聚酰胺酯漆包圓銅繞組線,180級 |
(Specifications for particular types of winding wires. Part 23 : solderable polyesterimide enamelled round copper wire, class 180.) |
| NF C31-673/A1-2002 |
特種繞組線規范.第23部分:180類可焊接聚氨亞胺漆包圓銅線 |
(Specifications for particular types of winding wires - Part 23 : solderable polyesterimide enamelled round copper wire, class 180.) |
| NF C31-674-1995 |
特種繞組線規范.第24部分:涂覆聚酰胺的聚酯或聚酰胺酯漆包圓鋁繞組線,180級 |
(Specifications for particular types of winding wires. Part 24 : polyester or polyesterimide enamelled round aluminium wire overcoated with polyamide, class 180.) |
| NF C31-674/A1-2001 |
特種繞組線規范.第24部分:聚酰胺涂層的180級聚酯或聚酯亞胺漆包圓鋁線 |
(Specifications for particular types of winding wires - Part 24 : polyester or polyesterimide enamelled round aluminium wire overcoated with polyamide, class 180.) |
| NF C31-675-1998 |
特種繞組線規范.第25部分:涂覆聚酰胺-酰亞胺酯的聚亞酰胺酯漆包圓鋁繞組線,200級 |
(Specifications for particular types of winding wires. Part 25 : polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200.) |
| NF C31-675/A1-1998 |
NF EN 60317-25-1998的修改1 |
() |
| NF C31-675/A2-2001 |
特種繞組線規范.第25部分:涂覆聚酰胺-酰亞胺酯的200級聚酯或聚酯亞胺漆包圓鋁線 |
(Specifications for particular types of winding wires - Part 25 : polyester or polyesterimide overcoated with polyamid-imide enamelled round aluminium wire, class 200.) |
| NF C31-6751-1998 |
NF C31-675-5 98年2月的補充件1 |
() |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com