標準號 |
中文名稱 |
英文名稱 |
| NF T47-201-2002 |
橡膠,塑料軟管和軟管組件.尺寸的測量方法 |
Rubber and plastics hoses and hose assemblies - Methods of measurement of dimensions. |
| NF T47-202-1996 |
橡膠和塑料軟管及軟管組件.液壓靜力試驗(歐洲標準EN ISO 1402) |
Rubber and plastics hoses and hose assemblies. Hydrostatic testing. |
| NF T47-203-2002 |
橡膠或塑料軟管.彎曲試驗 |
Rubber or plastics hoses - Bending tests. |
| NF T47-204-1969 |
橡膠.合成橡膠管或軟管.用浸漬或接觸法測定管抗液體作用的能力 |
RUBBER AND SIMILAR ELASTOMERS. RESISTANCE OF TUBES AND PIPES TO THE ACTION OF LIQUIDS BY CONTACT OR IMMERSION. (TESTING METHODS). |
| NF T47-205-1993 |
橡膠和塑料軟管.靜態條件下的耐臭氧性試驗的評定 |
Rubber and platics hoses. Assessment of ozone resistance under static conditions. |
| NF T47-206-1982 |
橡膠和塑料.管和軟管的外徑、厚度和同心度的測量 |
RUBBER OR PLASTICS BASED HOSES. MEASUREMENTS OF EXTERNAL DIAMETERS WALL THICKNESSES AND CONCENTRICITY. |
| NF T47-208-1996 |
橡膠軟管.外皮的抗磨性測定 |
Rubber hoses - Determination of abrasion resistance of the outer cover. |
| NF T47-208/A1-2000 |
橡膠軟管.外皮抗磨性的測定 |
(Rubber hoses - Determination of abrasion resistance of the outer cover.) |
| NF T47-209-1996 |
橡膠和塑料軟管.襯里耐磨性測定 |
Rubber and plastics hoses. Determination of abrasion of lining. |
| NF T47-210-1998 |
橡膠和塑料軟管.暴露在氙弧燈下的試驗.顏色和外觀變化的測定 |
Rubber and plastics hoses. Exposure to a xenon arc lamp. Determination of changes in colour and appearance. |
| NF T47-214-1998 |
橡膠和塑料軟管.易燃燒性試驗方法 |
Rubber and plastics hoses. Method of test for flammability. |
| NF T47-215-1995 |
橡膠和塑料軟管.穩定狀態下抗紫外線的測定 |
RUBBER AND PLASTICS HOSES. DETERMINATION OF ULTRA-VIOLET RESISTANCE UNDER STATIC CONDITIONS. (EUROPEAN STANDARD EN ISO 8580). |
| NF T47-217-1995 |
橡膠和塑料軟管及軟管組件.透氣性測定 |
Rubber and plastics hoses and hose assemblies. Determination of permeability to gas. |
| NF T47-218-1996 |
橡膠和塑料軟管.在動力條件下耐臭氧性的評定(歐洲標準EN ISO 10960) |
RUBBER AND PLASTICS HOSES. ASSESSMENT OF OZONE RESISTANCE UNDER DYNAMIC CONDITIONS. (EUROPEAN STANDARD EN ISO 10960). |
| NF T47-220-1994 |
氣焊接設備.焊接、切割和有關工藝用橡膠軟管 |
Gas welding equipment. Rubber hoses for welding, cutting and allied processes. |
| NF T47-220-2003 |
氣焊機.焊接、切割和相關工藝用橡膠軟管 |
(Gas welding equipment - Rubber hoses for welding, cutting and allied processes.) |
| NF T47-221-1996 |
氣焊設備.焊接和相關工藝用熱塑管 |
Gas welding equipment. Thermoplastic hoses for welding and allied processes. |
| NF T47-250-2003 |
烴類、溶劑和化學制品輸送用熱塑性多層(未硫化)軟管和軟管組件的規范 |
(Thermoplastic multi-layer (non vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification.) |
| NF T47-251-1-1997 |
橡膠和塑料軟管和軟管組件.試驗壓力和爆破壓力與設計工作壓力的比值 |
RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES. RATIOS OF PROOF AND BURST PRESSURE TO DESIGN WORKING PRESSURE. (EUROPEAN STANDARD EN ISO 7751). |
| NF T47-251-1996 |
工業通用橡膠和塑料軟管.孔直徑和公差.長度公差 |
Rubber and plastics hoses for general-purpose industrial applications. Bore diameters and tolerances, and tolerances on length. |
| NF T47-252-1997 |
壓縮空氣用紡織材料增強的橡膠軟管規范 |
Rubber hose, textile-reinforced, for compressed air. Specification. |
| NF T47-253-1997 |
普通供水用紡織材料增強的橡膠軟管規范 |
Rubber hoses, textile-reinforced, for general purpose water applications. Specification. |
| NF T47-254-2000 |
壓縮空氣織物增強塑料軟管.規范 |
Plastic hoses, textile-reinforced, for compressed air - Specification. |
| NF T47-255-1997 |
測量過的燃料分配用橡膠軟管和軟管部件規范 |
Rubber hoses and hose assemblies for measured fuel dispensing. Specification. |
| NF T47-256-1996 |
輸送無水氨用橡膠軟管和軟管組件(歐洲標準EN ISO 5771) |
Rubber hose and hose assemblies for transferring anhydrous ammonia. Specification. |
| NF T47-257-1997 |
普通供水用帶織物加固內襯的塑料軟管.規范 |
Plastics hoses, textile-reinforced, for general-purpose water applications. Specification. |
| NF T47-258-1993 |
吸水和排水用橡膠軟管規范 |
Rubber hoses for water suction and discharge. Specification. |
| NF T47-259-1996 |
橡膠軟管和軟管組件.織物增強的液壓型.規范 |
Rubber hoses and hose assemblies. Textile reinforced hydraulic type. Specification. |
| NF T47-260-1978 |
橡膠和塑料.洗餐具機和洗衣機用排水管 |
RUBBER. DRAINAGE PIPES FOR DISHWASHERS AND WASHING MACHINES. |
| NF T47-262-2003 |
液化石油氣和液化天然氣輸送用熱塑性多層(未硫化)軟管和軟管組件的規范 |
(Thermoplastic multi-layer (non vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - specifications.) |
| NF T47-263-1986 |
橡膠軟管.水蒸氣循環用軟管.特性 |
Rubber hoses for vapour circulation. Specifications. |
| NF T47-264-1995 |
輸送蒸汽用橡膠軟管.試驗方法 |
(Rubber hoses for steam. Test methods.) |
| NF T47-265-2002 |
塑料軟管.含水材料抽吸和排放用螺旋熱塑增強熱塑性軟管.規范 |
(Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharghe of aqueous materials - Specification.) |
| NF T47-266-1999 |
加油車運輸用橡膠軟管和軟管組件.規范 |
(RUBBER HOSES AND HOSE ASSEMBLIES FOR FUEL TRUCK DELIVERY. SPECIFICATION. (EUROPEAN STANDARD EN 1761).) |
| NF T47-268-1997 |
飛機加油用橡膠軟管和軟管組件.規范(EN I361) |
(Rubber hoses and hose assemblies for aviation fuel handling. Specification.) |
| NF T47-270-1997 |
橡膠軟管和軟管組件.液壓型橡膠包皮螺旋金屬線增強.規范 |
(Rubber hoses and hose assemblies. Rubber-covered spiral wire reinforced hydraulic type. Specification.) |
| NF T47-273-2002 |
無氣涂漆用橡膠和/或塑料軟管和軟管組件.規范 |
(Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification.) |
| NF T47-274-1993 |
塑料軟管.常規用途的可折疊水管, 織物增強.規格(歐洲標準EN 28029) |
(Plastics hose. General purpose collapsible water hose, textile reinforced. Specification.) |
| NF T47-275-1998 |
吸油管和排放設備用橡膠軟管組件.組件規范 |
(Rubber hose assemblies for oil suction and discharge services. Specifications for the assemblies.) |
| NF T47-276-1997 |
噴沙和砂石用橡膠軟管規范 |
(Rubber hoses for sand and grit blasting. Specification.) |
| NF T47-277-1996 |
用于油燃燒器的軟管和軟管組件.規范 |
(Rubber hoses and hose assemblies for use in oil burners. Specification.) |
| NF T47-280-1997 |
橡膠軟管和軟管組件.熱塑料織物增強液力型.規范 |
PLASTICS HOSES AND HOSE ASSEMBLIES. THERMOPLASTICS TEXTILE REINFORCED HYDRAULIC TYPE. SPECIFICATION. (EUROPEAN STANDARD EN 855). |
| NF T47-281-1997 |
橡膠軟管和軟管組件.液壓型金屬絲編織物增強.規范 |
Rubber hoses and hose assemblies. Wire braid reinforced hydraulic type. Specification. |
| NF T47-282-2002 |
石油類液體的抽吸和低壓出料用塑料軟管和軟管組件規范 |
Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquide - Specification. |
| NF T47-283-1999 |
液化石油氣,達到25BAR(2,5MPa)LGP(液相或氣相)的天然氣用橡膠軟管和軟管組件.規范(歐洲標準EN 1762) |
Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa). Specification. |
| NF T47-286-1998 |
橡膠或塑料軟管和軟管組件.無柔性液壓脈沖試驗.歐洲標準EN ISO 6803) |
Rubber or plastics hoses and hose assemblies. Hydraulic-pressure impulse test without flexing. |
| NF T47-287-1996 |
橡膠和塑料軟管和管系.軟管和管壁的透液量的測定 |
RUBBER AND PLASTICS HOSES AND TUBING. DETERMINATION OF TRANSMISSION OF LIQUIDS THROUGH HOSE AND TUBING WALLS. (EUROPEAN STANDARD EN ISO 8308). |
| NF T47-288-1997 |
橡膠軟管和軟管組件.液壓裝置用小型金屬絲編織物增強.規范 |
Rubber hoses and hose assemblies. Wire braid reinforced compact type for hydraulic applications. Specification. |
| NF T47-301-1972 |
橡膠.管道接頭用壓制和模制合成橡膠墊圈和型材.材料的一般特性 |
RUBBER MOLDED AND EXTRUDED SEALING RINGS AND PROFILES FOR PIPE WORK. GENERAL SPECIFICATIONS OF MATERIALS. |
| NF T47-302-1977 |
鋪地面用混凝土板間預成形橡膠連接材料.特性 |
RUBBER BASED MATERIALS FOR PRE-FORMED JOINTS MADE BETWEEN CONCRETE FLAGS FOR FLOORING. CHARACTERISTICS. |
| NF T47-303-1977 |
鋪地面用混凝土板間預成形橡膠連接材料.特性.飛機場跑道用連接材料 |
MATERIALS FOR RUBBER-BASED PRE-FORMED JOINTS FOR USE BETWEEN CONCRETE PAVING STONES. CHARACTERISTICS JOINTS FOR AIRPORT RUNWAYS. |
| NF T47-304-1983 |
增強橡膠伸縮套管.規范 |
REFORCED RUBBER COMPENSATING SLEEBES. |
| NF T47-305-1 1-1999 |
NF T47-305-1-96的補充件1 |
|
| NF T47-305-1-1996 |
彈性密封.排水設施用管接頭密封用材料的要求.第1部分:硫化橡膠 |
Elastomeric seals. Materials requirements for pipe joint seals used in water and drainage applications. Part 1 : vulcanized rubber. |
| NF T47-305-1/A1-1999 |
NF EN 681-1-1996的修改件1 |
|
| NF T47-305-1/A2-2003 |
彈性密封件.給水排水用管道連接密封件的材料要求.第1部分:硫化橡膠 |
Elastomeric seals - Material requirements for pipe joints seals used in water and drainage applications - Part 1 : vulcanized rubber. |
| NF T47-305-11-1999 |
NF T47-305-1-96的補充件1 |
() |
| NF T47-305-2-2000 |
彈性密封件.水和排水設施用管接頭密封件材料的要求.第2部分:熱塑性彈性材料 |
Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 2 : thermoplastic elastomers. |
| NF T47-305-2/A1-2003 |
彈性密封件.給水排水用管道連接密封件的材料要求.第2部分:熱塑彈性體 |
Elastomeric seals - Material requirements for pipe joints seals used in water and drainage applications - Part 2 : thermoplastic elastomers. |
| NF T47-305-3-2000 |
彈性密封件.水和排水設施用管接頭密封件材料的要求.第3部分:硫化橡膠泡沫材料 |
Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 3 : cellular material of vulcanized rubber. |
| NF T47-305-3/A1-2003 |
彈性密封件.給水排水用管道連接密封件的材料要求.第3部分:硫化橡膠多孔材料 |
Elastomeric seals - Material requirements for joint seals used in water and drainage applications - Part 3 : cellular materials of vulcanized rubber. |
| NF T47-305-4-2000 |
彈性密封件.水和排水設施用管接頭密封件材料的要求.第4部分:鑄造聚氨基甲酸乙酯密封件 |
Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 4 : cast polyurethane sealing elements. |
| NF T47-305-4/A1-2003 |
彈性密封件.給水排水用管道連接密封件的材料要求.第4部分:聚氨酯密封鑄件 |
Elastomeric seals - Material requirements for pipe joint seals in water and drainage applications - Part 4 : cast polyurethane sealing elements. |
| NF T47-306-1985 |
煤氣管道接頭用橡膠密封墊圈.規范和材料 |
Joints rings used for gaz supply pipes and fittings. Specification for material. |
| NF T47-306-2003 |
彈性密封件.輸送氣體和碳?xì)湟后w的管道和配件用密封件的材料要求 |
(Elastomeric seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids.) |
| NF T47-401-1977 |
橡膠或塑料制圓柱形墊塊 |
CYLINDERS LINED WITH RUBBER OR PLASTICS. |
| NF T47-501-1998 |
橡膠O型環.標識,尺寸和公差 |
Rubber O-ring - Designation, sizes and tolerances. |
| NF T47-502-1996 |
O型圈.缺陷的檢查和分類 |
O rings. Dimensional checking and classification of defects. |
| NF T47-503-1998 |
橡膠O型環.最普通的O型環的材料要求 |
Rubber O-rings. Materials requirements for the most common O-ring types. |
| NF T47-504-1991 |
橡膠環形密封圈.靜力學和動力學工業應用的普通質量的一般用途的產品.精度級G.質量級4 |
RUBBER O-RINGS. GENERAL PURPOSE PRODUCTS OF ORDINARY QUALITY FOR STATIC AND DYNAMIC INDUSTRIAL APPLICATIONS. PRECISION CLASS G. QUALITY CLASS 4. |
| NF T47-505-1991 |
橡膠環形密封圈.靜力學和動力學工業應用的普通質量的一般用途的產品.精度級G.質量級2 |
RUBBER O-RINGS. GENERAL PURPOSE PRODUCTS OF SUPERIOR QUALITY FOR STATIC AND DYNAMIC INDUSTRIAL APPLICATIONS. PRECISION CLASS G. QUALITY CLASS 2. |
| NF T47-506-1991 |
橡膠環形密墊圈.零件的試驗方法和條件 |
RUBBER O-RINGS. TEST CONDITIONS AND METHODS FOR FULL-SIZE SPECIMENS. |
| NF T47-507-1994 |
橡膠O型環.O型環的包裝,識別和儲存 |
RUBBER O-RINGS. PACKAGING, IDENTIFICATION AND STORAGE OF RUBBER O-RINGS. |
| NF T47-600-2002 |
橡膠和塑料軟管和軟管組件.詞匯 |
Rubber and plastics hoses and hose assemblies - Vocabulary. |
| NF T47-820-1-2000 |
結構軸承.第1部分:一般設計規則 |
Structural bearings - Part 1 : general design rules. |
| NF T47-820-11-1998 |
結構軸承.第11部分:運輸,存儲和安裝 |
Structural bearings. Part 11 : transport, storage and installation. |
| NF T47-820-2-2001 |
結構軸承.第2部分:滑動件 |
Structural bearings - Part 2 : sliding elements. |
| NF T47-820-7-2001 |
結構軸承.第7部分:球柱和滾柱聚四氟乙烯軸承 |
Structural beairings - Part 7 : spherical and cylindrical PTFE bearings. |
| NF T47-820-9-1998 |
結構軸承.第9部分:防護 |
Structural bearings. Part 9 : protection. |
| NF T48-101-1994 |
密封用石棉和橡膠壓縮薄板.尺寸的測定 |
Asbestos and rubber compressed sheets for seals. Measurement of dimensions. |
| NF T48-102-1994 |
密封用石棉和橡膠壓縮薄板.密度的測定 |
ASBESTOS AND RUBBER COMPRESSED SHEETS FOR SEALS. DETERMINATION OF DENSITY. |
| NF T48-103-1994 |
密封用石棉和橡膠壓縮薄板.拉伸強度的測定 |
Asbestos and rubber compressed sheets for seals. Determination of tensile strength. |
| NF T48-105-1994 |
密封用石棉和橡膠壓縮薄板.液體浸泡試驗 |
Asbestos and rubber compressed sheets for seals. Liquid immersion test. |
| NF T48-106-1994 |
密封用石棉和橡膠壓縮薄板.液體浸泡后撕裂強度試驗 |
ASBESTOS AND RUBBER COMPRESSED SHEETS FOR SEALS. BREAKING STRENGTH AFTER LIQUID IMMERSION. |
| NF T48-107-1994 |
密封用石棉和橡膠壓縮薄板.常溫下抗液壓強度試驗 |
ASBESTOS AND RUBBER COMPRESSED SHEETS FOR SEALS. RESISTANCE TO HYDRAULIC PRESSURE AT AMBIENT TEMPERATURE. |
| NF T48-108-1994 |
密封用石棉和橡膠壓縮薄板.抗彎曲強度試驗 |
Asbestos and rubber compressed sheets for seals. Determination of bending resistance. |
| NF T48-109-1994 |
密封用石棉和橡膠壓縮薄板.干燥箱的人工老化試驗 |
Asbestos and rubber compressed sheets for seals. Accelerated ageing test on oven. |
| NF T50-001-1-2000 |
塑料.聚酰胺(PA)模塑和擠制材料.名稱與符號 |
Plastics - Polyamide (PA) moulding and extrusion materials - Part 1 : designation. |
| NF T50-001-2-1996 |
塑料.模塑和擠壓成型的聚酰胺(PA)材料.第2部分:試樣的制備和性能的測定 |
PLASTICS. POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS. PART 2 : PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES. (EUROPEAN STANDARD EN ISO 1874-2). |
| NF T50-002-2/A1-2000 |
塑料.聚丙烯(PP)模塑和擠制材料.第2部分:試樣制備和性能測定.修改件1 |
Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties - Amendment 1. |
| NF T50-004-2-1995 |
塑料.乙烯/乙烯基醋酸脂共聚物熱塑性塑料.第2部分:試樣的制備和性能的測定 |
PLASTICS. ETHYLENE/VINYL ACETATE (E/VAC) MOULDING AND EXTRUSION MATERIALS. PART 2 : PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES. (EUROPEAN STANDARD EN ISO 4613-2). |
| NF T50-005-1988 |
塑料.聚(亞烷基)對苯二酸鹽.第1部分:命名 |
Plastics. Polyalkylene terephtalates. Part 1 : designation. |
| NF T50-006-2/A1-2000 |
塑料.聚乙烯(PE)模塑和擠制材料.第2部分:試樣制備和性能測定.修改件1 |
Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties - Amendment 1. |
| NF T50-007-1-1999 |
塑料.聚丁烯(PB)模壓和擠制材料.第1部分:命稱與符號和規范的基礎 |
PLASTICS. POLYBUTENE (PB) MOULDING AND EXTRUSION MATERIALS. PART 1 : DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS. (EUROPEAN STANDARD EN ISO 8986-1). |
| NF T50-007-2/A1-2000 |
塑料.聚丁烯(PB)模塑和擠制材料.第2部分:試樣制備和性能測定.修改件1 |
Plastics - Polybutene (PB) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties - Amendment 1. |
| NF T50-050-1-2002 |
塑料.符號和縮略術語.第1部分:基本聚合物及其專有特性 |
Plastics - Symbols and abbreviated terms - Part 1 : basic polymers and their special characteristics. |
| NF T50-050-2-2002 |
塑料.符號和縮略語.第2部分:填充劑及加強材料 |
Plastics - Symbols and abbreviated terms - Part 2 : fillers and reinforcing materials. |
| NF T50-050-4-1999 |
塑料.符號和縮略語.第4部分:阻燃劑 |
Plastics. Symbols and abbreviated terms. Part 4 : flame retardants. |
| NF T50-060-2000 |
塑料.塑料產品通用識別標志 |
Plastics - Generic identification and marking of plastics products. |
| NF T50-062-1-2000 |
塑料.單一數據的采樣和收集比較.第1部分:模式材料 |
Plastics - Acquisition and presentation of comparable single-point data - Part 1 : moulding materials. |
| NF T50-062-2-2002 |
塑料.可比單點數據的采集和表示法.第2部分:長纖維增強塑料 |
Plastics - Acquisition and presentation of comparable single-point data - Part 2 : long-fibre-reinforced plastics. |
| NF T50-064-1-1999 |
塑料.可比較多點數據的采集和表示.第1部分:機械性能 |
PLASTICS. ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA. PART 1 : MECHANICAL PROPERTIES. (EUROPEAN STANDARD EN ISO 11403-1). |
| NF T50-064-1-2003 |
塑料.可比多點數據的采集和表示.第1部分:機械性能 |
(Plastics - Acquisition and presentation of comparable multipoint data - Part 1 : mechanical properties.) |
| NF T50-064-2-1999 |
塑料.可比較多點數據的采集和表示.第2部分:熱性能和工藝性能 |
PLASTICS. ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA. PART 2 : THERMAL AND PROCESSING PROPERTIES. (EUROPEAN STANDARD EN ISO 11403-2). |
| NF T50-064-3-2001 |
塑料.可比較多點數據的采集和表示.第3部分:環境對特性的影響 |
Plastics - Acquisition and presentation of comparable multipoint data - Part 3 : environmental influences on properties. |
| NF T50-100-2002 |
塑料.詞匯 |
Plastics - Vocabulary. |
| NF T51-000-1978 |
塑料.優選試驗溫度和試驗時間 |
Plastics. Preferred scales of temperatures and test durations. |
| NF T51-001-1997 |
塑料.彎曲性能測定 |
Plastics. Determination of flexural properties. |
| NF T51-001-2003 |
塑料.彎曲性能測定 |
(Plastics - Determination of flexural properties.) |
| NF T51-005-2-1996 |
塑料.載荷下偏轉溫度的測定.第2部分:塑料和橡木 |
Plastics. Determination of temperature of deflection under load. Part 2 : plastics and ebonite. |
| NF T51-005-3-1996 |
塑料.載荷下偏轉溫度的測定.第3部分:高強度熱固性疊層板和長纖維增強塑料 |
Plastics. Determination of temperature of deflection under load. Part 3 : high-strength thermosetting laminates and long-fibre reinforced plastics. |
| NF T51-006-1957 |
塑料.可溶于甲醇的聚苯乙烯物質的測定 |
PLASTICS. DETERMINATION OF METHANOL-SOLUBLE POLYSTYRENE. |
| NF T51-008-1998 |
塑料.酚-甲醛模塑.游離氨的檢驗 |
Plastics. Phenol-formaldehyde mouldings. Detection of free ammonia. |
| NF T51-009-1998 |
塑料.酚-甲醛模塑.游離氨和銨化合物的測定.比色法 |
Plastics. Phenol-formaldehyde mouldings. Determination of free ammonia and ammonium compounds. Colorimetric comparison method. |
| NF T51-010-1998 |
塑料.酚-甲醛模塑.單體酚的測定.碘量法 |
Plastics. Phenol-formaldehyde mouldings. Detection of free phenols. Iodometric method. |
| NF T51-012-1957 |
塑料模制材料收縮率的計算 |
PLASTICS. DETERMINATION OF BULK FACTOR OF MOULDING MATERIALS. |
| NF T51-013-1969 |
塑料液狀聚氯乙烯樹脂粘性指數的常規測定 |
PLASTICS. CONVENTIONAL DETERMINATION OF VISCOSITY NUMBER OF PVC RESINS IN SOLUTION. |
| NF T51-018-1981 |
塑料.硬塑料反復彎曲縱向彈性模量 |
Plastics. Modulus of longitudinal elasticity of rigid plastics. |
| NF T51-021-1997 |
塑料.熱塑塑料.維卡(VICAT)軟化溫度的測定 |
Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST). |
| NF T51-022-1997 |
塑料.微生物作用的評價(歐洲標準EN ISO 846) |
Plastics. Evaluation of the action of microorganisms. |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com