標準號 |
中文名稱 |
英文名稱 |
| NF P19-829-2-1998 |
預制混凝土產品.玻璃增強混凝土的試驗方法.新GRC清洗出法對纖維含量的測定 |
(Precast concrete products. Test method for glass-fibre reinforced cement. Part 2 : measuring the fibre content in fresh GRC, “Wash out test“.) |
| NF P19-829-3-1998 |
預制混凝土產品.玻璃增強混凝土的試驗方法.噴霧GRC纖維含量的測定 |
(Precast concrete products. Test method for glass-fibre reinforced cement. Part 3 : measuring the fibre content of sprayed GRC.) |
| NF P19-829-4-1998 |
預制混凝土產品.玻璃增強混凝土的試驗方法.簡化彎曲實驗法對彎曲強度的測定 |
(Precast concrete products. Test method for glass-fibre reinforced cement. Part 4 : measuring bending strength, “Simplified bending test“ method.) |
| NF P19-829-5-1998 |
預制混凝土產品.玻璃纖維增強水泥的試驗方法.第5部分:彎曲強度的試驗.完全彎曲試驗方法 |
(Precast concrete products. Test method for glass-fibre reinforced cement. Part 5 : measuring bending strength, “Complete bending test“ method.) |
| NF P19-829-6-1998 |
預制混凝土產品.玻璃纖維增強水泥的試驗方法.第6部分:干密度測定和浸入法水吸收的測定 |
(Precast concrete products. Test method for glass-fibre reinforced cement. Part 6 : determination of the absorption of water by immersion and determination of the dry density.) |
| NF P19-829-7-1998 |
預制混凝土產品.玻璃增強混凝土的試驗方法.第7部分:隨潮濕含量尺寸變化的極限測量 |
(Precast concrete products. Test method for glass-fibre reinforced cement. Part 7 : measurement of extremes of dimensional variations due to moisture content.) |
| NF P20-102-1963 |
框架.細木工.木材詞匯 |
(FRAMEWORK. JOINERY. WOOD VOCABULARY.) |
| NF P20-301-1970 |
木作.鉗工制品.鍋爐房和類似房間用門 |
(JOINERY. LOCKSMITHERY. DOORS OF BOILERHOUSES AND SIMILAR PREMISES.) |
| NF P20-302-2002 |
窗戶的特性 |
(Characteristics of windows.) |
| NF P20-311-1982 |
防盜門及其附件的技術規范 |
(TECHNICAL SPECIFICATIONS FOR DOOR URITS FITTED WITH THEIR ACCESSORIES TO WITHSTAND BREAK-INS BY VIOLENT MEANS.) |
| NF P20-401-1944 |
框架.木作.鉗工制品.法國式窗扇和窗框尺寸 |
(FRAMEWORKS JOINERY. LOCKSMITHING. DIMENSIONS OF FRENCH WINDOW SASHES AND CASEMENTS.) |
| NF P20-501-2002 |
窗戶的試驗方法 |
(Test methods for windows.) |
| NF P20-502-2000 |
窗戶和門.透氣性.試驗方法 |
(Windows and doors - Air permeability - Test method.) |
| NF P20-503-2000 |
窗戶和門.防風.試驗方法 |
(Windows and doors - Resistance to wind load - Test method.) |
| NF P20-504-1977 |
窗的試驗方法.試驗報告格式 |
(METHODS OF TESTING WINDOWS. FORM OF TEST REPORT. (EUROPEAN STANDARD EN 78).) |
| NF P20-505-2000 |
窗戶和門.防水.試驗方法 |
(Windows and doors - Watertightness - Test method.) |
| NF P20-506-1981 |
窗的試驗方法.機械試驗 |
(Methods of testing windows. Mechanical tests.) |
| NF P20-507-2000 |
門和窗.空氣透過性.分級 |
(Windows and doors - Air permeability - Classification.) |
| NF P20-508-2000 |
門和窗.對風阻力的承受能力.分類 |
(Windows and doors - Resistance to wind load - Classification.) |
| NF P20-509-2000 |
門和窗.水緊性.分級 |
(Windows and doors - Watertightness - Classification.) |
| NF P20-512-1999 |
門活頁.高度,寬度,厚度,矩形面積的測量方法 |
(Door leaves. Method for measurement of height, width, thickness and squareness.) |
| NF P20-513-2000 |
門扇.在連續不變氣候條件下門扇抗?jié)穸茸兓男阅艿臏y定 |
(Door leaves - Determination of the behaviour under humidity variations in successive uniform climates.) |
| NF P20-514-2000 |
門.在兩種不同氣候間的門扇的性能.試驗方法 |
(Doors - Behaviour between two different climates - Test method.) |
| NF P20-515-2000 |
門扇.耐硬物體沖擊的測定 |
(Door leaves - Determination of the resistance to hard body impact.) |
| NF P20-516-1999 |
高或樞軸門.垂直負載抗性的測定(歐州標準EN 947) |
(Hinged or pivoted doors. Determination of the resistance to vertical load.) |
| NF P20-517-2000 |
鉸鏈門或支樞式門.門扇靜態扭轉的測定 |
(Hinged or pivoted doors - Determination of the resistance to static torsion.) |
| NF P20-518-1984 |
門的試驗方法.門扇硬度重復扭曲試驗 |
(METHODS OF TESTING DOORS. TEST FOR THE CHANGE IN STIFFNESS OF THE DOOR LEAVES BY REPEATED TORSION. (EUROPEAN STANDARD EN 130).) |
| NF P20-519-1983 |
門.門扇振動試驗 |
(Doors. Impact test on the lead.) |
| NF P20-521-1983 |
門.門扇配接板條的連接的平面剪切試驗 |
(Doors. Shearing test.) |
| NF P20-522-1983 |
門.門扇下部冷水浸泡試驗 |
(Doors. Test of the lower part of the door leaf by immersion in cold water.) |
| NF P20-523-1983 |
門.門扇抗?jié)駸嵝阅茉囼?yàn) |
(Doors. Testing the behaviour of door leaves subjected to climatic influences.) |
| NF P20-524-1983 |
門.螺訂拔起試驗 |
(Doors. Screw wrenching test.) |
| NF P20-525-1983 |
門.耐火試驗 |
(Doors. Fire resistance test.) |
| NF P20-526-1983 |
門.預涂漆試驗 |
(Doors. Prepainting test.) |
| NF P20-527-1999 |
窗戶和窗簾墻壁,門,百葉窗和活動遮板.柔軟和重的物體撞擊門的抗性測定 |
(Windows and curtain walling, doors, blinds and shutters. Determination of the resistance to soft and heavy body impact for doors.) |
| NF P20-528-2000 |
門和窗.對來回開關的耐性.試驗方法 |
(Windows and doors - Resistance to repeated opening and closing - Test method.) |
| NF P20-530-2000 |
門.強度要求的分級 |
(Doors - Classification of strength requirements.) |
| NF P20-532-2000 |
操作力量.試驗方法.第2部分:門 |
(Operating forces - Test method - Part 2 : doors.) |
| NF P20-533-2000 |
門.氣候影響.要求和分級 |
(Doors - Climatic influences - Requirements and classification.) |
| NF P20-534-2003 |
窗戶和人行門.機械耐久性.要求和分類 |
(Windows and pedestrian doors - Mechanical durability - Requirements and classification.) |
| NF P20-538-2003 |
窗.軟重物體的沖擊.試驗方法、安全要求和分類 |
(Windows - Soft and heavy body impact - Test method, safety requirements and classification.) |
| NF P20-539-2001 |
窗.機械特性的分類.壓力、扭力和操縱力 |
(Windows - Classification of machanical properties - Racking, torsion and operating forces.) |
| NF P20-540-2001 |
門窗和遮板.耐爆炸性.要求和分類.第1部分:沖擊管 |
(Windows, doors and shutters - Explosion resistance - Requirements and classification - Part 1 : shock tube.) |
| NF P20-542-2001 |
門窗和遮板.耐爆炸性.試驗方法.第1部分:沖擊管 |
(Windows, doors and shutters - Explosion resistance - Test method - Part 1 : shock tube.) |
| NF P20-551-1982 |
防盜門及其附件性能的測試方法 |
(METHODS OF TESTING THE CAPACITY OF DOOR UNTIS FITTED WITH THEIR ACCESSORIES TO WITHSTAND BREAK-INS BY VIOLETN MEANS.) |
| NF P20-602-1999 |
窗、門、百葉窗.防彈性.要求和分類 |
(Windows, doors, shutters and blinds. Bullet resistance. Requirements and classification.) |
| NF P20-603-1999 |
窗、門、百葉窗.防彈性.試驗方法 |
(Windows, doors, shutters and blinds. Bullet resistance. Test method.) |
| NF P20-604-2000 |
門扇.普通和局部平坦性.測量方法 |
(Door leaves - General and local flatness - Measurement method.) |
| NF P20-605-2000 |
門扉.總體和局部平整度.公差級 |
(Door leaves - General and local flatness - Tolerance classes.) |
| NF P20-606-2000 |
門扉.高度、寬度、厚度和垂直度.公差級 |
(Door leaves - Height, width, thickness and squareness - Tolerance classes.) |
| NF P21-203-1-1993 |
建筑工程.木材結構框架及樓梯.第1部分:技術規范 |
(DTU 31-1. BUILDING WORKS. TIMBER FRAMEWORKS AND STAIRS. PART 1 : TECHNICAL SPECIFICATIONS.) |
| NF P21-203-1/A1-1998 |
DTU 31.1.修改件1 |
() |
| NF P21-203-1/A2-2002 |
DTU 31.1.建筑工程.木材骨架和樓梯.第1部分:技術規范 |
(DTU 31.1 - Building works - Timber frameworks and stairs - Part 1 : technical specifications.) |
| NF P21-203-11-1998 |
NF P 21-203-1補充件1 |
() |
| NF P21-203-2-1993 |
建筑工程.私人合同.木構架工程和木結構樓梯.第2部分:特別條款 |
(DTU 31-1. BUILDING WORKS. PRIVATE CONTRACTS. TIMBER FRAMEWORKS AND STAIRS. PART 2 : SPECIAL CLAUSES.) |
| NF P21-203-2/A1-2002 |
DTU 31.1.建筑工程.私人合同.木材骨架和樓梯.第2部分:專用條款 |
(DTU 31.1 - Building works - Private contracts - Timber frameworks and stairs - Part 2 : special clauses.) |
| NF P21-204-1-1993 |
DTU 31-2.建筑物.原木房屋和建筑物結構.第1部分:技術規范 |
(DTU 31-2. BUILDING WORKS. TIMBERFRAME HOUSES AND BUILDINGS CONSTRUCTION. PART 1 : TECHNICAL SPECIFICATIONS.) |
| NF P21-204-1/A1-1998 |
DTU 31.2修改件1 |
() |
| NF P21-204-11-1998 |
NF P 21-204-1補充件1 |
() |
| NF P21-204-2-1993 |
DTU 31-2.建筑工程.私人合同.木構架房屋和建筑施工.第2部分:特別條款 |
(DTU 31-2. BUILDING WORKS. PRIVATE CONTRACTS. TIMBERFRAME HOUSES AND BUILDINGS CONSTRUCTION. PART 2 : SPECIAL CLAUSES.) |
| NF P21-205-1-1995 |
DTU31.3.與金屬板緊固件和聯接板相關的木結構框架.第1部分:建筑規則 |
(DTU 31-3. TIMBER STRUCTURES CONNECTED WITH METAL PLATE FASTENERS OR GUSSETS. PART 1 : CONSTRUCTION RULES.) |
| NF P21-205-2-1995 |
DTU31.3.與金屬板緊固件或聯接板相關的木材結構.第2部分:設計規則 |
(DTU 31-3. TIMBER STRUCTURES CONNECTED WITH METAL PLATE FASTENERS OR GUSSETS. PART 2 : DESIGN RULES.) |
| NF P21-205-3-1995 |
DTU31.3.與金屬板緊固件和聯接板相關的木結構框架.第3部分:特別規范手冊 |
(DTU 31-3. TIMBER STRUCTURES CONNECTED WITH METAL PLATE FASTENERS OR GUSSETS. PART 3 : PARTICULAR SPECIFICATIONS BOOK.) |
| NF P21-210-1993 |
木梯.術語 |
(WOODEN STAIRS. TERMINOLOGY.) |
| NF P21-211-1993 |
木梯.規范 |
(WOODEN STAIRS. SPECIFICATIONS.) |
| NF P21-300-1993 |
木材構件.試驗方法.靜態負荷試驗總則 |
(TIMBER STRUCTURES. TEST METHODS. GENERAL PRINCIPLES FOR STATIC LOAD TESTING. (EUROPEAN STANDARD EN 380).) |
| NF P21-301-1998 |
木材結構.建筑用木材和膠合板.垂直于紋理的機械特性和剪切強度的測定 |
(Timber structures. Structural timber and glued laminated timber. Determination of shear strength and mechanical properties perpendicular to the grain.) |
| NF P21-302-1995 |
木結構.結構木材和膠合板.某些物理性能和機械性能的測定 |
(Timber structures. Structural timber and glued laminated timber. Determination of som physical and mechanical properties.) |
| NF P21-303-1993 |
木材構件.試驗方法.暗銷形緊固件基座值和嵌入強度測定 |
(TIMBER STRUCTURES. TEST METHODS. DETERMINATION OF EMBEDDING STRENGTH AND FOUNDATION VALUES FOR DOWEL TYPE FASTENERS. (EUROPEAN STANDARD EN 383).) |
| NF P21-304-1996 |
木結構.測定結構機械特性用木基護墻板的試驗 |
(Timber structures. Test methods. Determination of mechanical properties of wood based paned.) |
| NF P21-305-1995 |
木基板材.機械特性和密度的特性值的測定 |
(Wood-based panels. Determination of characteristic values of mechanical properties and density.) |
| NF P21-310-1991 |
木結構.通過機械固定件進行組裝.測定強度和變形特性的一般原則.(歐洲標準EN 26891) |
(TIMBER STRUCTURES. JOINTS MADE WITH MECHANICAL FASTENERS. GENERAL PRINCIPLES FOR THE DETERMINATION OF STRENGTH AND DEFORMATION CHARACTERISTICS. (EUROPEAN STANDARD EN 26891).) |
| NF P21-312-1999 |
木結構.試驗方法.用穿孔金屬板緊固件進行組裝 |
(Timber structures - Test methods - Joints made with punched metal plate fasteners.) |
| NF P21-313-1991 |
木結構.通過機械連接裝置進行組裝試驗.有關木頭密度的要求 |
(TIMBER STRUCTURES. TESTING OF JOINTS MADE WITH MECHANICAL FASTENERS. REQUIREMENTS FOR WOOD DENSITY. (EUROPEAN STANDARD EN 28970).) |
| NF P21-351-2003 |
結構木材.尺寸和允許偏差 |
(Structural timber - Sizes, permitted deviations.) |
| NF P21-352-1995 |
膠合木板.尺寸、充許偏差 |
(Glued laminated timber. Sizes. Permissible deviations.) |
| NF P21-353-2003 |
結構木材.強度等級 |
(Structural timber - Strength classes.) |
| NF P21-354-1999 |
結構木材.膠合木材.強度分級和特征值測定 |
(Timber structures. Glued laminated timber. Strength classes and determination of characteristic values.) |
| NF P21-357-1995 |
建筑用木料.分級.目檢強度分級標準的要求 |
(Structural timber. Grading. Requirements for visual strength grading standards.) |
| NF P21-358-1995 |
木結構.機械性能和密度特征值的測定 |
(Structural timber. Determination of characteristic values of mechanical properties and density.) |
| NF P21-359-1995 |
建筑用木料.分級.機械強度、分級木料和分級機的要求 |
(Structural timber. Grading. Requirements for machine strength graded timber and grading machines.) |
| NF P21-360-2002 |
指接結構木材.性能要求和最低生產要求 |
(Finger jointed structural timber - Performance requirements and minimum production requirements.) |
| NF P21-370-2002 |
膠合木板.性能要求和最低生產要求 |
(Glued laminated timber - Performance requirements and minimum production requirements.) |
| NF P21-371-2002 |
膠合木板.膠粘層的剝離試驗 |
(Glued laminated timber - Delamination test of glue lines.) |
| NF P21-372-1995 |
膠合木板.膠粘線抗剪試驗 |
(Glued laminated timber. Shear test of glue lines.) |
| NF P21-373-2002 |
粘膠層壓板材.大指接件.性能要求和最低生產要求 |
(Glued laminated timber - Large finger joints - Performance requirements and minimum production requirements.) |
| NF P21-374-1995 |
木結構.木框架墻的軟體沖擊試驗 |
(Timber structures. Test methods. Soft body impact test of timber framed walls.) |
| NF P21-380-2002 |
木結構.試驗方法.機械緊固件用接頭的循環試驗 |
(Timber structures - Test methods - Cyclic testing of joints made with mechanical fasteners.) |
| NF P21-381-1995 |
木結構.試驗方法.測定強度和變形特性用桁架的試驗 |
(Timber structures. Test methods. Test of trusses for the determination of strength and deformation behaviour.) |
| NF P21-382-1996 |
木結構.試驗方法.結構墻板剝離強度和剛度的試驗 |
(Timber structures. Test methods. Racking strength and stiffness of timber frame wall panels.) |
| NF P21-383-1998 |
木材結構.試驗方法.木地板的結構性能 |
(TIMBER STRUCTURES. TEST METHODS. PERFORMANCE OF STRUCTURAL FLOOR DECKING. (EUROPEAN STANDARD EN 1195).) |
| NF P21-384-1993 |
木材構件.試驗方法.暗銷形緊固件屈服力矩.釘子 |
(TIMBER STRUCTURES. TEST METHODS. DETERMINATION OF THE YIELD MOMENT OF DOWEL TYPE FASTENERS. NAILS. (EUROPEAN STANDARD EN 409).) |
| NF P21-385-1999 |
木緊固件.木連接件規范 |
(Timber fasteners - Specifications for connectors for timber.) |
| NF P21-388-2002 |
木質緊固件.負載電容器的特性和連接件的滑動系數 |
(Timber fasteners - Characteristic load-carrying capacities and slip-moduli for connector joints.) |
| NF P21-390-2002 |
架空線用原木桿.試驗方法.測定彈性模量、彎曲強度、密度和含水量 |
(Timber poles for overhead lines - Test methods - Determination of modulus of elasticity, bending strength, density and moisture content.) |
| NF P21-391-2002 |
架空線用木桿.強度分級標準 |
(Wood poles for overhead lines - Strength grading criteria.) |
| NF P21-392-2002 |
架空線用木桿.尺寸.測量方法和允許偏差 |
(Wood poles for overhead lines - Sizes - Methods for measurement and permissible deviations.) |
| NF P21-393-2002 |
架空線用木桿.特征值的測定 |
(Wood poles for overhead lines - Determination for characteristic values.) |
| NF P21-394-2002 |
架空線用木桿.耐久性要求 |
(Wood poles for overhead lines - Durability requirements.) |
| NF P21-395-1998 |
結構木材.強度分級.可視級和樣品分配. |
(Structural timber. Strength classes. Assignment of visual grades and species.) |
| NF P21-400-2003 |
結構木材和木制品.阻力條款和相關允許應力 |
(Structural timber and wood-based products - Resistance clauses and related permissible stresses.) |
| NF P22-202-1-1993 |
DTU 32-2.建筑工程.金屬結構件.鋁合金框架.第1部分:技術規范 |
(DTU 32-2 - Building works - Metal construction - Aluminium alloys framework - Part 1 : technical specifications.) |
| NF P22-202-1/A1-2000 |
DTU 32.2 建筑工程.金屬構架.鋁合金框架.第1部分:技術規范 |
(DTU 32.2 - Building works - Metal construction - Aluminium alloys framework - Part 1 : technical specifications.) |
| NF P22-202-2-1993 |
DTU 32-2. 建筑工程.私人合同.金屬結構.鋁合金制門窗框.第2部分:特殊條款 |
(DTU 32-2. BUILDING WORKS. PRIVATE CONTRACTS. METAL CONSTRUCTION. ALUMINIUM ALLOYS FRAMEWORK. PART 2 : SPECIAL CLAUSES.) |
| NF P22-250-1978 |
金屬結構件.圓形空心型材交叉切割焊接件.焊接件設計和鑒定 |
(METAL STRUCTURES. WELDED ASSEMBLIES OF CIRCULAR HOLLOW SECTIONS. DESIGN AND INSPECTION.) |
| NF P22-251-1978 |
金屬結構件.圓形空心型材交叉切割焊接件.構造規定 |
(METAL STRUCTURES. WELDED ASSEMBLIES OF CIRCULAR HOLLOW SECTIONS.CONSTRUCTION.) |
| NF P22-252-1978 |
金屬結構件.圓形空心型材焊接件 |
(METAL STRUCTURES. WELDED ASSEMBLIES OF CIRCULAR HOLLOW SECTIONS.) |
| NF P22-255-1979 |
金屬結構件.圓形或矩形空心型材I或H型焊接件.設計和檢驗 |
(METAL CONSTRUCTION. HOLLOW SECTION WELDED ASSEMBLIES ON TYPE I AND H SECTIONS. DESIGN AND VERIFICATION.) |
| NF P22-258-1982 |
金屬結構件.靜態負荷下空心型材和矩形空心型材焊接件.設計和檢驗 |
(WELDED ASSEMBLIES OF HOLLOW SECTIONS AND RECTANGULAR HOLLOW SECTIONS SUBJECTED TO STATIC LOADING. DESIGN AND VERIFICATION.) |
| NF P22-410-1982 |
金屬結構.鉚接.構件.鉚釘?shù)脑O(shè)計 |
(Metal construction. Riveted assemblies. Conditions of construction. Design of rivets.) |
| NF P22-411-1978 |
金屬結構件.鉚訂連接.鉚接施工 |
(METAL CONSTRUCTION. RIVETED ASSEMBLIES. EXECUTION OF ASSEMBLIES.) |
| NF P22-430-1982 |
金屬結構.非預應力螺栓連接.構件及螺栓的設計 |
(Metal construction. Assembly by non-prestressed bolts. Conditions of construction and design of the bolts.) |
| NF P22-431-1978 |
金屬結構.非預應力螺栓連接.連接施工 |
(METAL CONSTRUCTION. ASSEMBLY BY NON PRESTRESSED BOLTS. EXECUTION OF ASSEMBLIES.) |
| NF P22-460-1979 |
金屬結構.可控拉緊螺栓連接.構造規定和螺栓計算 |
(METAL CONSTRUCTION. JOINTING BY MEANS OF BOLTS WITH CONTROLLED TIGHTENING. STRUCTURES REQUIREMENTS AND CHECKING OF JOINTING.) |
| NF P22-461-1979 |
金屬結構.可控拉緊螺栓連接.常規摩擦系數測定 |
(METAL CONSTRUCTION. JOINTING BY MEANS OF BOLTS WITH CONTROLLED TIGHTENING. DETERMINAITON OF THE CONVENTIONAL COEFFICIENT OF FRICTION.) |
| NF P22-462-1978 |
金屬結構.可控拉緊螺栓連接.連接件制造和準備 |
(METAL CONSTRUCTION. JOINTING BY MEANS OF BOLTS WITH CONTROLLED TIGHTENING. FABRICATION AND PREPARATION OF JOINTS.) |
| NF P22-463-1978 |
金屬結構.可控拉緊螺栓連接.連接施工 |
(METAL CONSTRUCTION. JOINTING BY MEANS OF BOLTS WITH CONTROLLED TIGHTENING. EXECUTION OF JOINTS.) |
| NF P22-466-1979 |
金屬結構.可控拉緊螺栓連接.螺栓拉緊和檢驗方法 |
(METAL CONSTRUCTION. JOINTING BY MEANS OF BOLTS WITH CONTROLLED TIGHTENING. METHODS OF TIGHTENING AND CHECKING OF BOLTS.) |
| NF P22-468-1987 |
金屬結構.可控拉緊螺栓連接.螺母控制旋轉拉緊.旋轉角測定 |
(Steel construction. Bolted joints with controlled tightening. Tightening by controlled turn of nut. Determination of the angle of rotation.) |
| NF P22-469-1978 |
金屬結構.可控拉緊螺栓連接.扭力扳手校準 |
(METAL CONSTRUCTION. JOINTING BY MEANS OF BOLTS WITH CONTROLLED TIGHTENING. CALIBRATION OF TORQUE WRENCHES.) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com