標準號 |
中文名稱 |
英文名稱 |
| NF A35-024-1998 |
混凝土鋼材.由直徑小于5mm的金屬線構成的織物 |
(Steels for concrete. Fabric composed of wires with a diameter lower than 5 mm.) |
| NF A35-027-2003 |
鋼筋混凝土用鋼產品.鋼筋 |
(Steel products for reinforced concrete - Reinforcements.) |
| NF A35-030-1996 |
鋼制品.架空線路支持的混凝土桿用帶改進粘附性的棒材 |
(Steel products. Bars with improved bond for concrete poles, supports for over head lines.) |
| NF A35-035-2001 |
鋼產品.熱鍍鋅或鋅鋁覆層的預應力光滑鋼絲和7股鋼絲 |
(Steel products - Hot-dip zinc or zinc-aluminium coated prestressing smooth wires and 7-wire strands.) |
| NF A35-049-1984 |
冶金產品.通用的拉制棒材和線材.鋼號和質量 |
(Iron and steel. General purpose steel. Bars and wire-rod for drawing. Grades and types.) |
| NF A35-051-1-1995 |
拉拔和/或冷軋用非合金鋼棒.第1部分:一般要求 |
(Non-alloy steel rod for drawing and/or cold rolling. Part 1 : general requirements.) |
| NF A35-051-2-1995 |
拉拔和/或冷軋用非合金鋼棒.第2部分:一般用途鋼棒的專門要求 |
(Non-alloy steel rod for drawing and/or cold rolling. Part 2 : specific requirements for general purposes rod.) |
| NF A35-051-3-1995 |
拉拔和/或冷軋用非合金鋼棒.第3部分:沸騰和沸騰代用低碳鋼棒 |
(NON-ALLOY STEEL ROD FOR DRAWING AND/OR COLD ROLLING. PART 3 : SPECIFIC REQUIREMENTS FOR RIMMED AND RIMMED SUBSTITUTE LOW CARBON STEEL ROD. (EUROPEAN STANDARD EN 10016-3).) |
| NF A35-051-4-1995 |
拉拔和/或冷軋用非合金鋼棒.第4部分:特殊用途鋼棒的專門要求 |
(NON-ALLOY STEEL ROD FOR DRAWING AND/OR COLD ROLLING. PART 4 : SPECIFIC REQUIREMENTS FOR ROD FOR SPECIAL APPLICATIONS. (EUROPEAN STANDARD EN 10016-4).) |
| NF A35-052-1987 |
鋼鐵產品.帶改進粘附性的焊接鋼絲網和鋼絲用非合金鋼線材 |
(Iron and steel. Unalloyed steel wire rod for welded fabric and wire with improved adherence.) |
| NF A35-053-1984 |
鋼鐵產品.熱成型或低溫成型制造產品用非合金鋼線材.型號 |
(Iron and steel. Non-alloy steel wire rod for products made by hot or cold forming. Types.) |
| NF A35-055-1984 |
鋼鐵產品.涂藥焊條用非合金鋼線材.等級和型號 |
(Iron and steel. Wire rod in non-alloy steel for coated electrodes. Grades and types.) |
| NF A35-056-1984 |
鋼鐵產品.氣體保護電弧焊和潛弧焊的焊條用合金鋼和非合金鋼線材.等級和型號 |
(Iron and steel. Wire rod in non-alloy and alloy steel for colled electrodes for gas shielded are welding and submerged arc welding. Grades and types.) |
| NF A35-057-1979 |
鋼鐵產品.冷成形高強度機械彈簧鋼絲制造用非合金鋼線材.型號 |
(IRON AND STEEL. WIRE RODS MADE OF UNALLOYED STEEL FOR THE MANUFACTURE OF HIGH RESISTING COLD-FORMED SPRING WIRES. TYPES.) |
| NF A35-256-1986 |
冶金產品.特殊TH型材.鋼的品種 |
(IRON AND STEEL. SPECIAL TH SECTIONS. GRADES.) |
| NF A35-501-1993 |
非合金結構鋼的熱釓產品.交貨技術條件 |
(Hot-rolled products of non alloy structural steels. Technical delivery conditions.) |
| NF A35-502-1993 |
耐空氣腐蝕性高的結構鋼.交貨技術條件 |
(Structural steels with improved atmospheric corrosion resistance. Technical delivery conditions.) |
| NF A35-503-1994 |
鐵和鋼.熱浸沒的鍍鋅鋼 |
(Iron and steel. Steel for hot dip galvanizing.) |
| NF A35-505-1-1993 |
可焊細晶粒結構鋼熱軋制品.第1部分:一般交貨條件 |
(Hot-rolled products in weldable fine grain structural steels. Part 1 : general delivery conditions.) |
| NF A35-505-2-1993 |
可焊細晶粒結構鋼熱軋制品.第2部分:正火鋼交貨條件 |
(Hot-rolled products in weldable fine grain structural steels. Part 2 : delivery conditions for nomalized/normalized rolled steels.) |
| NF A35-505-3-1993 |
可焊細晶粒結構鋼熱軋制品.第2部分:熱機軋制鋼的交貨條件 |
(Hot-rolled products in weldable fine grain structural steels. Part 3 : delivery conditions for thermomechanical rolled steels.) |
| NF A35-511-1996 |
自動化噴砂清理和自動化預制優質鋼產品(歐洲標準EN 10238) |
(Automatically blast-cleaned and automatically prefabrication primed structural steel products.) |
| NF A35-520-1-1995 |
非合金鋼熱軋板樁.第1部分:交貨技術條件 |
(Hot rolled sheet piling of non alloy steels. Part 1 : technical delivery conditions.) |
| NF A35-551-1999 |
鑄造硬化鋼.技術提交條件(歐洲標準EN 10084) |
(Case hardening steels - Technical delivery conditions.) |
| NF A35-552-1-1997 |
淬火和回火鋼.第1部分:特殊鋼交貨技術條件 |
(Quenched and tempered steels - Part 1 : technical delivery conditions for specials steels.) |
| NF A35-552-2-1997 |
淬火鋼和回火鋼.第2部分:非合金優質鋼交貨技術條件 |
(Quenched and tempered steels. Part 2 : technical delivery conditions for unaloyed quality steels.) |
| NF A35-552-3-1996 |
淬火鋼和回火鋼.第3部分:硼鋼的交貨技術條件 |
(Quanched and tempered steels. Part 3 : technical delivery conditions for boron steels.) |
| NF A35-556-1984 |
冶金產品.供金屬構件用的外螺紋緊固件用熱處理后的特殊鋼. |
(Iron and steel. Heat treatable steels for externally threaded fasteners for structural purposes.) |
| NF A35-557-1983 |
冶金產品.高性能機械制造用的外螺紋緊固件用熱處理后特殊鋼. |
(Iron and steel. Heat treatable steels for externally threaded, high performance fasteners for engineering purposes.) |
| NF A35-558-1999 |
具有特殊高溫和/或低溫性能的緊固件用鋼和鎳合金 |
(Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties.) |
| NF A35-562-1998 |
自由切割鋼.半精整產品熱軋棍材和棒材的技術提交條件(歐洲標準EN10087) |
(Free-cutting steels. Technical delivery conditions for semi-finished products, hot-rolled bars and rods.) |
| NF A35-563-1983 |
冶金產品.表面加熱后淬火用熱處理的特殊鋼.質量 |
(Iron and steel. Heat treated special steels for quenching after surface treating. Types.) |
| NF A35-564-1-2002 |
冷鐓和冷擠壓的鋼桿材、棒材和線材.第1部分:一般交貨技術條件 |
(Steel rod, bars and wire for cold heading and cold extrusion - Part 1 : general technical delivery conditions.) |
| NF A35-564-2-2002 |
冷鐓和冷擠壓的鋼桿材、棒材和線材.第2部分:冷處理后不用于熱處理的鋼的交貨技術條件 |
(Steel rod, bars and wire for cold heading and cold extrusion - Part 2 : technical delivery conditions for steels not intended for heat treatment after cold working.) |
| NF A35-564-3-2002 |
冷鐓和冷擠壓的鋼桿材、棒材和線材.第3部分:表面硬化鋼的交貨技術條件 |
(Steel rod, bars and wire for cold heading and cold extrusion - Part 3 : technical delivery conditions for case hardening steels.) |
| NF A35-564-4-2002 |
冷鐓和冷擠壓的鋼桿材、棒材和線材.第4部分:淬火和回火鋼的交貨技術條件 |
(Steel rod, bars and wire for cold heading and cold extrusion - Part 4 : technical delivery conditions for steels for quenching and tempering.) |
| NF A35-564-5-2002 |
冷鐓和冷擠壓的鋼桿材、棒材和線材.第5部分:不銹鋼的交貨技術條件 |
(Steel rod, bars and wire for cold heading and cold extrusion - Part 5 : technical delivery conditions for stainless steels.) |
| NF A35-565-1994 |
鋼鐵.軸承鋼.類型 |
(IRON AND STEEL. BEARING STEELS. TYPES.) |
| NF A35-566-1983 |
鋼鐵產品.鏈條鋼.等級和型號 |
(Iron and steel products. Chain steels. Grades and types.) |
| NF A35-567-1984 |
冶金產品.高負載重型機械結構用滲碳合金鋼.牌號.半成品和棒材 |
(IRON AND STEEL. CASE HARDENED ALLOY STEELS FOR SOLID HIGHLY-STRESSED MECHANICAL PARTS. GRADES. SEMI-FINISHED PRODUCTS AND BARS.) |
| NF A35-571-2003 |
淬火回火彈簧用熱軋鋼.交貨技術條件 |
(Hot-rolled steels for quenched and tempered springs - Technical delivery conditions.) |
| NF A35-572-1995 |
不銹鋼.第1部分:不銹鋼目錄 |
(STAINLESS STEELS. PART 1 : LIST OF STAINLESS STEELS. (EUROPEAN STANDARD EN 10088-1).) |
| NF A35-574-1995 |
不銹鋼.第3部分:一般用途的半成品,鋼棒,軋制線材和型鋼的交貨技術條件 |
(Stainless steels. Part 3 : technical delivery conditions for semi-finished products, bars, rods, and sections for general purposes.) |
| NF A35-578-2003 |
耐蠕變的鎳和鈷合金鋼 |
(Creep resisting steels, nickel and cobalt alloys.) |
| NF A35-579-1998 |
內燃機合金和鋼材 |
(Valve steels and alloys for internal combustion engines.) |
| NF A35-584-1999 |
耐熱鋼及鎳合金 |
(HEAT RESISTING STEELS AND NICKEL ALLOYS. (EUROPEAN STANDARD EN 10095).) |
| NF A35-587-2003 |
彈簧用不銹鋼帶材.交貨技術條件 |
(Stainless steel strip for springs - Technical delivery conditions.) |
| NF A35-590-1992 |
鋼鐵產品.工具鋼 |
(IRON AND STEEL. TOOL STEELS.) |
| NF A35-596-1987 |
冶金產品.碳素刀具鋼 |
(Iron and steel. Carbon steels for cutlery.) |
| NF A36-000-1979 |
結構鋼和鍋爐與壓力容器用鋼的焊接特性的推薦規范 |
(RECOMMENDATIONS CONCERNING THE WELDABILITY OF STRUCTURAL STEEL AND OF BOILER AND PRESSURE VESSELS STEEL.) |
| NF A36-010-1980 |
為防止脆性斷裂危險用金屬結構鋼和鍋爐用鋼的類型選擇 |
(CHOICE OF STEEL TYPES FOR THE METALLIC CONSTRUCTION AND BOILER MAKING FOR BRITTLE FRACTURE HAZARD PREVENTION.) |
| NF A36-142-2002 |
冷軋錫產品.電解錫板和電解鉻/氧化鉻涂層鋼 |
(Cold reduced tinmill products - Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel.) |
| NF A36-144-1992 |
生產馬口鐵或電鍍鉻鐵用冷軋黑鐵皮卷材(歐洲標準EN 10205) |
(COLD REDUCED BLACKPLATE IN COIL FROM FOR THE PRODUCTION OF TINPLATE OR ELECTROLYTIC CHROMIUM/CHROMIUM OXIDE COATED STEEL. (EUROPEAN STANDARD EN 10205).) |
| NF A36-160-1994 |
電鍍鋅冷軋鋼板產品.交貨技術條件 |
(Electrolytically zinc coated cold rolled steel flat products. Technical delivery conditions.) |
| NF A36-160-2003 |
冷成型用電解鍍鋅扁平冷軋材.技術交貨條件 |
(Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions.) |
| NF A36-161-1999 |
電解鋅鎳(ZN)鍍膜鋼平板產品技術提交條件.(歐洲標準EN10271) |
(ELECTROLYTICALLY ZINC-NICKEL (ZN) COATED STEEL FLAT PRODUCTS. TECHNICAL DELIVERY CONDITIONS. (EUROPEAN STANDARD EN 10271).) |
| NF A36-202-1993 |
對制品表面垂直方向有高變形特性的鋼制品.交貨技術條件 |
(Steel products with improved deformation properties perpendicular to the surface of the product. Technical delivery conditions.) |
| NF A36-204-1-1995 |
淬火和回火或沉淀硬化條件下制造高屈服結構鋼的板材和寬扁材.第1部分:一般交貨條件 |
(Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions. Part 1 : general delivery conditions.) |
| NF A36-204-2-1995 |
淬火和回火或沉淀硬化條件下制造高屈服結構鋼的板材和寬扁材.第2部分:淬火或回火鋼 |
(Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions. Part 2 : delivery conditions for quenched and tempered steels.) |
| NF A36-204-3-1995 |
淬火和回火或沉淀硬化條件下制造高屈服結構鋼的板材和寬扁材.第3部分:沉淀硬化鋼交貨條件 |
(Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions. Part 3 : delivery conditions for precipitation.) |
| NF A36-205-1-2001 |
承壓器件用扁鋼制品.第1部分:一般要求 |
(Flat products made of steels for pressure purposes - Part 1 : general requirements.) |
| NF A36-205-1/A1-2003 |
壓力容器用扁平鋼軋材.第1部分:一般要求 |
(Flat products made of steels for pressure purposes - Part 1 : general requirements.) |
| NF A36-205-2-2003 |
壓力容器用扁平鋼軋材.第2部分:具有規定高溫性能的非合金鋼與合金鋼 |
(Flat products made of steels for pressure purposes - Part 2 : non-alloy and alloy steels with specified elevated temperature properties.) |
| NF A36-205-3-2003 |
壓力容器用扁平鋼軋材.第3部分:經過正火處理的可焊細晶粒鋼 |
(Flat products made of steels for pressure purposes - Part 3 : weldable fine grain steels, normalized.) |
| NF A36-205-4-2003 |
壓力容器用扁平鋼軋材.第4部分:具有規定低溫特性的鎳合金鋼 |
(Flat products made of steels for pressure purposes - Part 4 : nickel alloy steels with specified low temperature properties.) |
| NF A36-205-5-2003 |
壓力容器用鋼制扁平產品.第5部分:熱機軋制的可焊接細粒鋼 |
(Flat products made of steels for pressure purposes - Part 5 : weldable fine grain steels, thermomechanically rolled.) |
| NF A36-205-6-2003 |
壓力容器用鋼制扁平產品.第6部分:可焊接淬火和回火細粒鋼 |
(Flat products made of steels for pressure purposes - Part 6 : weldable fine grain steels, quenched and tempered.) |
| NF A36-211-1997 |
焊接氣體氣缸用薄鋼板和條帶 |
(Steel sheet and strip for welded gas cylinders.) |
| NF A36-212-2002 |
固定近海結構的可焊接結構鋼.技術交貨條件 |
(Weldable structural steels for fixed offshore structures - Technical delivery conditions.) |
| NF A36-225-2000 |
壓力容器用不銹鋼棒 |
(Stainless steel bars for pressure purposes.) |
| NF A36-226-2001 |
具有規定的高溫特性的壓力容器用熱軋可焊接鋼棒 |
(Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties.) |
| NF A36-231-3-1995 |
冷成型用高屈服點鋼制熱軋扁平產品.第3部分:普通退火和軋制鋼交貨條件 |
(HOT-ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING. PART 3 : DELIVERY CONDITIONS FOR NORMALIZED OR NORMALIZED ROLLED STEELS. (EUROPEAN STANDARD EN 10149-3).) |
| NF A36-250-1987 |
冶金產品.鍍了金屬的板材 |
(Iron and steel. Plated sheet.) |
| NF A36-270-1991 |
冶金產品.長型鋼板 |
(Iron and steel. Profiled plates in rolling direction.) |
| NF A36-301-1998 |
冷定型用連續熱滾低碳鋼片材和帶材.技術提交條件 |
(Continuously hot-rolled low carbon steel sheet and strip for cold forming. Technical delivery conditions.) |
| NF A36-310-2000 |
冷成形用高屈服強度連續熱鍍覆層的板材和帶鋼.交貨技術條件 |
(Continuously hot-dip coated strip and sheet of steels with higher yield strength for cold forming - Technical delivery conditions.) |
| NF A36-310/A1-2003 |
冷成形用有較高屈服強度的持續熱浸覆層鋼帶和鋼薄板.技術交貨條件 |
(Continuously hot-dip coated strip and sheet of steels with higher yield strength for cold forming - Technical delivery conditions.) |
| NF A36-321-2000 |
冷沖壓用連續熱鍍鋅的低碳鋼制的板材和帶鋼.交貨的技術條件 |
(Continuously hot-dip zinc coated low carbon steels strip and sheet for cold forming - Technical delivery conditions.) |
| NF A36-322-2000 |
連續熱鍍鋅的結構鋼制的板材和帶鋼.交貨的技術條件 |
(Continuously hot-dip zinc coated structural steels strip and sheet - Technical delivery conditions.) |
| NF A36-325-1995 |
連續熱浸鍍鋁鋅薄鋼板和鋼帶.交貨技術條件 |
(CONTINUOUSLY HOT-DIP ALUMINIUM-ZINC (AZ) COATED STEEL STRIP AND SHEET. TECHNICAL DELIVERY CONDITIONS. (EUROPEAN STANDARD EN 10215).) |
| NF A36-331-1989 |
鋼鐵產品.不銹鋼.連續鍍鉛的帶材和板材 |
(IRON AND STEEL. STAINLESS STEEL. CONTINUOUSLY LEADED SHEET AND STRIP.) |
| NF A36-340-2002 |
連續熱浸鋁-硅涂覆的鋼條和鋼板.交貨技術條件 |
(Continuously hot-dip aluminium-silicon (AS) coated steel strip and sheet - Technical delivery conditions.) |
| NF A36-345-1991 |
冶金產品.鋁合金薄板,薄板和卷材 |
(IRON AND STEEL. ALUMINIUM COATED SHEET. CUT LENGTHS AND COILS.) |
| NF A36-350-1-1996 |
連續有機涂覆(卷材涂覆)鋼板產品.第1部分:一般信息(定義、材料、公差和試驗方法)(歐洲標準EN 10169-1) |
(Continuously organic coated (coil coated) steel flat products. Part 1 : general information (definitions, materials, tolerances, test methods).) |
| NF A36-350-3-2003 |
連續有機涂覆(卷材涂覆)扁鋼產品.第3部分:建筑物內部用產品 |
(Continuously organic coated (coil coated) steel flat products - Part 3 : products for building interior applications.) |
| NF A36-361-1986 |
冶金產品.模板用的三聯鋼帶.質量 |
(Iron and steel. Three-layer steel strips for mould boards. Prescriptions.) |
| NF A36-401-1998 |
冷成型冷軋低碳鋼平板產品.技術遞交條件 |
(Cold-rolled low carbon steel flat products for cold forming. Technical delivery conditions.) |
| NF A36-402-1996 |
玻璃搪瓷用冷軋低碳鋼平板產品.技術交貨條件 |
(COLD-ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR VITREOUS ENAMELLING. TECHNICAL DELIVERY CONDITIONS. (EUROPEAN STANDARD EN 10209).) |
| NF A36-560-2002 |
氮化鋼.交貨技術條件 |
(Nitriding steels - Technical delivery conditions.) |
| NF A36-601-1980 |
鍋爐和壓力容器用可焊鋼制鍛件.碳鋼和碳錳鋼.質量等級和類型 |
(WELDED STEEL FORGINGS FOR BOILERS AND PRESSURE VESSELS. CARBON AND CARBON MANGANESE STEELS. GRADES AND TYPES.) |
| NF A36-602-1988 |
鍋爐和壓力容器用可焊鋼制鍛件.鉬、錳鉬和鉻鉬合金鋼.質量等級和類型 |
(WELDABLE STEEL FORGINGS FOR BOILERS AND PRESSURE VESSELS. MO,MN-MO AND CR-MO ALLOY STEELS. GRADES AND TYPES.) |
| NF A36-603-1988 |
鍋爐和壓力容器用可焊鋼制鍛件.高屈服強度鋼.質量等級和類型 |
(WELDABLE STEEL FORGINGS FOR BOILERS AND PRESSURE VESSELS. HIGH YIELD STRENGTH ALLOY STEELS. GRADES AND TYPES.) |
| NF A36-605-1982 |
鍋爐和壓力容器用焊接鋼沖壓鍛件.碳鋼和碳錳鋼.牌號與型號 |
(Weldable steel drip forged articles for boilers and pressure vessels. Carbon and carbon-manganese steels. Grades and types .) |
| NF A36-606-1982 |
鍋爐和壓力容器用焊接鋼沖壓鍛件.鉬、錳鉬和鉻鉬合金鋼.牌號和型號 |
(Weldable steel drop forged articles for boilers and pressure vessels. Mo, Mn/Mo and Cr/Mo alloy steels. Grades and types.) |
| NF A36-607-1984 |
鍋爐和壓力容器用自由鍛造或模鍛法制奧氏體不銹鋼零件.質量等級和類型 |
(AUSTENITIC STAINLESS STEEL PARTS OBTAINED BY FLAT DIE FORGING OR DROP FORGING FOR BOILERS AND PRESSURE VESSELS. GRADE AND TYPES.) |
| NF A36-613-1986 |
一般用鍛件.不銹鋼 |
(GENERAL PURPOSE FORGINGS. STAINLESS STEELS.) |
| NF A36-620-1-1998 |
壓力設備用鋼鍛件.第1部分:自由鍛的一般要求(歐洲標準EN 10222-1) |
(STEEL FORGINGS FOR PRESSURE PURPOSES. PART 1 : GENERAL REQUIREMENTS FOR OPEN DIE FORGINGS. (EUROPEAN STANDARD EN 10222-1).) |
| NF A36-620-1/A1-2002 |
壓力容器用鋼鍛件.第1部分:敞口鑄模鍛件的一般要求 |
(Steel forgings for pressure purposes - Part 1 : general requirements for open die forgings.) |
| NF A36-620-3-1999 |
承壓用鋼鍛件.第3部分:規定低溫特性的鎳鋼 |
(STEEL FORGINGS FOR PRESSURE PURPOSES. PART 3 : NICKEL STEELS WITH SPECIFIED LOW TEMPERATURE PROPERTIES. (EUROPEAN STANDARD EN 10222-3).) |
| NF A36-620-4-1999 |
承壓用鋼鍛件.第4部分:高彈性強度的可焊接細粒鋼 |
(STEEL FORGINGS FOR PRESSURE PURPOSES. PART 4 : WELDABLE FINE GRAIN STEELS WITH HIGH PROOF STRENGTH. (EUROPEAN STANDARD EN 10222-4).) |
| NF A36-620-4/A1-2002 |
承壓用鋼鍛件.第4部分:高彈性強度的可焊接細晶粒鋼 |
(Steel forgings for pressure purposes - Part 4 : weldable fine grain steels with high proof strength.) |
| NF A36-630-2-1999 |
一般工程用可拆模鋼鍛件.第2部分: 非合金優質鋼和特殊鋼 |
(Open die steel forgings for general engineering purposes - Part 2 : non-alloy quality and special steels.) |
| NF A36-630-3-1999 |
一般工程用可拆模鋼鍛件.第3部分:特殊合金鋼 |
(Open die steel forging for general engineering purposes - Part 3 : alloy special steels.) |
| NF A36-701-2002 |
包裝用鋼.用于接觸人和動物消費的食品、產品和飲料的扁鋼制品.未鍍的黑鋼板 |
(Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption - Non-coated steel (black plate).) |
| NF A36-702-2002 |
包裝用鋼.用于接觸人和動物消耗的食品、飼料、產品和飲料的扁鋼制品.涂錫鋼(馬口鐵) |
(Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption - Tin coated steel (tinplate).) |
| NF A36-703-2002 |
包裝用鋼.用于接觸人和動物消費的食品、產品和飲料的扁鋼制品.鍍鉻非合金鋼 |
(Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption - Non alloy steel chromium coated.) |
| NF A36-711-2002 |
無包裝鋼.用于接觸人和動物消耗的食品、產品和飲料的不銹鋼 |
(Non packaging steel - Stainless steel intended for use in contact with foodstuffs, products and beverages for human and animal consumption.) |
| NF A36-712-1-2002 |
非包裝鋼.用于接觸人和動物消耗的食品、飼料、產品和飲料的涂金屬的扁鋼制品.第1部分:涂鋅或鋅合金(非不銹) |
(Unpackaged steels - Metallic coated flat steel products intended for contact with foodstuffs, products and beverages for human and animal consumption - Part 1 : zinc or zinc alloy coated (non-stainles) |
| NF A36-712-2-2002 |
非包裝鋼.用于接觸人和動物消耗的食品、飼料、產品和飲料的涂金屬的扁鋼制品.第1部分:涂鋅或鋅合金(非不銹) |
(Unpackaged steels - Metallic coated flat steel products intended for contact with foodstuffs, products and beverages for human and animal consumption - Part 2 : Aluminium coated or aluminium-silicium) |
| NF A36-712-3-2003 |
未包裝鋼.與人和動物用食品、產品和飲料接觸的鍍金屬的扁鋼制品.第3部分:鍍鉻(非不銹)鋼 |
(Unpackaged steels - Metallic coated flat steel products intented for contact with foodstuffs, products and beverages for human and animal consumption - Part 3 : chromium plated (non stainless) steels.) |
| NF A36-712-5-2003 |
包裝用鋼除外的鋼.與人和動物消費用食品、產品和飲料接觸的金屬涂覆扁鋼制品.第5部分:涂錫(非不銹)鋼 |
(Steels excluding packaging applications - Metallic coated flat steel products intended for contact with foodstuffs, products and beverages for human and animal consumption - Part 5 : tin coated (non-s) |
| NF A36-714-2002 |
非包裝鋼.用于接觸人和動物消耗的食品、飼料、產品和飲料的扁鋼制品.非涂覆(非不銹)鋼 |
(Unpackaged steels - Flat steel products intended for contact with foodstuffs, products and beverages for human and animal consumption - Uncoated (and non stainless) steels.) |
| NF A36-715-2003 |
未包裝鋼.與人和動物用食品、產品和飲料接觸的長的鋼制品.未鍍涂、非不銹、非合金和合金鋼 |
(Unpackaged steels - Long steel products intended for contact with foodstuffs, products and beverages for human and animal consumption - Uncoated, non stainless, unalloyed and alloyed steels.) |
| NF A37-101-2003 |
冷軋鋼型材.交貨技術條件.尺寸和橫截面公差 |
(Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances.) |
| NF A37-201-1-1995 |
非合金鋼冷成形板垛.第1部分:交貨技術條件 |
(Cold formed sheet piling of non alloy steels. Part 1 : technical delivery conditions.) |
| NF A37-401-1-1999 |
光亮鋼制品.技術交貨條件.第1部分:總則 |
(Bright steel products. Technical delivery conditions. Part 1 : general.) |
| NF A37-401-2-1999 |
光亮鋼制品.技術交貨條件.第2部分:一般工程用鋼 |
(Bright steel products. Technical delivery conditions. Part 2 : steels for general engineering purposes.) |
| NF A37-401-3-1999 |
光亮鋼制品.技術交貨條件.第3部分:易切削鋼 |
(Bright steel products. Technical delivery conditions. Part 3 : free-cutting steels.) |
| NF A37-401-4-1999 |
光亮鋼制品.技術交貨條件.第4部分:表面硬化鋼 |
(Bright steel products. Technical delivery conditions. Part 4 : case-hardening steels.) |
| NF A37-401-5-1999 |
光亮鋼制品.技術交貨條件.第5部分:淬火和回火鋼 |
(Bright steel products. Technical delivery conditions. Part 5 : steels for quenching and tempering.) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com