標準號 |
中文名稱 |
英文名稱 |
| NF P41-221/A1-1999 |
DTU 60.5.建筑工程.銅管道.家用冷熱水供應管道.廢水,雨水排放管和空調安裝管.技術規范 |
(DTU 60.5 - Building works - Copper piping. Supply of hot and cold domestic water, drainage of waste water, rainwater, air conditioning installations - Technical specifications.) |
| NF P41-221/A2-2000 |
DTU 60.5.建筑工程.銅管道.家用冷熱水供應管道.廢水,雨水排放管和空調安裝管.技術規范 |
(DTU 60.5 - Building works - Coper piping - Supply of hot and cold domestic water, drainage of waste water, rainwater, air conditioning installations - Technical specifications.) |
| NF P41-2211-1999 |
DTU 60.5.NF P41-221-93的補充件1 |
() |
| NF P41-302-1994 |
纖維水泥制品.壓力管道和接頭(歐洲標準EN 512) |
(Fibre-cement products. Pressure pipes and joints.) |
| NF P41-302/A1-2002 |
纖維混凝土制品.壓力管和連接件 |
(Fibre-cement products - Pressure pipes and joints.) |
| NF P41-305-2001 |
纖維水泥管.敷設和現場施工指南 |
(Fibre-cement pipelines - Guide for laying and on-site work practices.) |
| NF P41-400-1995 |
包括接頭和配件的混凝土壓力管的共同要求 |
(Common requirements for concrete pressure pipes including joints and fittings.) |
| NF P41-401-1995 |
包括接頭和配件的非圓柱型加筋混凝土壓力管 |
(Reinforced concrete pressure pipes and distributed reinforcement concrete pressure pipes (non-cylinder type), including joints and fittings.) |
| NF P41-402-1995 |
包括接頭和配件的圓柱型加筋混凝土壓力管 |
(Reinforced concrete pressure pipes, cylinder type, including joints and fittings.) |
| NF P41-403-1995 |
包括接頭和配件的圓柱型和非圓柱型預應力混凝土壓力管及管用預應力鋼的具體要求 |
(Prestressed concrete pressure pipes, cylcinder and non-cylinder, including joints, fittings and specific requirement for prestressing steel for pipes.) |
| NF P41-600-1-2003 |
建筑物內水調節設備.機械過濾器.第1部分:顆粒額定值80鎚到150鎚.性能、安全和試驗要求 |
(Water conditioning equipment inside buildings - Mechanical filters - Part 1: particle rating 80 um to 150 um - Requirements for performances, safety and testing.) |
| NF P42-201-1-1993 |
DTU 90-1.建筑工程.廚房裝置建筑(排水裝置和存儲裝置)第1部分:技術規范 |
(DTU 90-1. BUILDING WORKS. WORKS ON KITCHEN UNITS (SINK UNITS AND STORAGE UNITS). PART 1 : TECHNICAL SPECIFICATIONS.) |
| NF P42-201-2-1993 |
DTU 90-1.建筑工程.廚房裝置建筑(排水裝置和存儲裝置)第2部分:特別條款 |
(DTU 90-1. BUILDING WORKS. PRIVATE CONTRACTS. WORKS ON KITCHEN UNITS (SINK UNITS AND STORAGE UNITS). PART 2 : SPECIAL CLAUSES.) |
| NF P43-000-2003 |
建筑物閥門.建筑物中飲用水供應用銅合金節流閥.試驗要求.國家標準補充 |
(Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements - National complement.) |
| NF P43-001-2000 |
建筑物用閥門.建筑物中供應引用水用銅合金截止閥.試驗和要求 |
(Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements.) |
| NF P43-002-1981 |
建筑物水管閥門.水表截止閥.一般技術規范 |
(VALVES AND TAPS FOR WATER SUPPLY IN BUILDINGS. STOP VALVES FOR METER. GENERAL TECHNICAL SPECIFICATIONS.) |
| NF P43-003-1983 |
建筑物水管閥門.沖刷水箱閥門.一般技術規范 |
(VALVES FOR BUILDING. BALL FLOAT VALVES FOR FLUSHING TANKS. GENERAL TECHNICAL SPECIFICATIONS.) |
| NF P43-007-1985 |
建筑物水管閥門.A級控制非止回閥.一般技術規范 |
(Valves and taps for water supply in buildings. Controllable check valves class A. General technical specifications.) |
| NF P43-009-1988 |
建筑用供水閥門.自控帶中間溢流室的管路.技術規范 |
(VALVES AND TAPS FOR BUILDINGS. NON CONTROLLABLE PIPE INTERRUPTOR WITH INTERMEDIATE DISCHARGE CHAMBER. GENERAL TECHNICAL SPECIFICATIONS.) |
| NF P43-010-2003 |
防飲用水回流污染的設備.帶減壓區的可控制回流防止器.B系列A型 |
(Devices to prevent pollution by backflow of potable water - Controllable backflow preventer with reduced pressure zone - Family B - Type A.) |
| NF P43-011-1985 |
建筑物水管閥門.非控制不同壓力范圍CB斷路器.一般技術規范 |
(VALVES AND TAPS FOR WATER SUPPLY IN BUILDINGS. CB DISCONNECTORS WITH DIFFERENT NON CONTROLLABLE PRESSURE RANGES. GENERAL TECHNICAL SPECIFICATIONS.) |
| NF P43-013-1988 |
建筑用水管閥門.斜通氣閥.通用技術規范 |
(VALVES AND TAPS FOR BUILDINGS. INCLINE ANTI VACUUM VALVES (STRAIGHT OR ANGLED) DA. GENERAL TECHNICAL SPECIFICATIONS.) |
| NF P43-014-1988 |
建筑物閥門.直流永久空氣接觸開關.一般技術規范 |
(VALVES AND TAPS FOR BUILDING. PIPE INTERRUPTOR WITH PERMANENT ATMOSPHERIC CONTACT DC. GENERAL TECHNICAL SPECIFICATIONS.) |
| NF P43-016-1985 |
建筑物水管閥門.“HA“端部斷路器.一般技術規范 |
(VALVES AND TAPS FOR WATER SUPPLY IN BUILDINGS. HA ENDING DISCONNECTOR FOR TAPPING COCKS. GENERAL TECHNICAL SPECIFICATIONS.) |
| NF P43-017-1989 |
建筑物水管閥門.帶法蘭可調EA止回閥.一般技術規范 |
(VALVES AND TAPS FOR WATER SUPPLY IN BULDINGS. CONTROLLABLE CHECK VALVES EA,WITH FLANGES. GENERAL TECHNICAL SPECIFICATIONS.) |
| NF P43-018-1990 |
建筑物水管閥門.飲用水衛生監測儀器.特性 |
(VALVES AND TAPS FOR WATER SUPPLY IN BUILDINGS. CHECKING FITTING IN PLACE OF SANITARY PROTECTION UNITIES USED FOR DRINKING SUPPLY. SPECIFICATIONS.) |
| NF P43-020-2003 |
防飲用水回流造成污染的設備.無限制的氣隙.A類、A型氣隙 |
(Devices to prevent pollution by backflow of potable water - Unrestricted air gap-Family A, Type A.) |
| NF P43-022-1988 |
建筑物水管閥門.AC分流溢出的設備.通用技術規范 |
(VALVES AND TAPS FOR BUILDINGS. AIR GAP WITH DIVERTER AND OVERFLOW AC. GENERAL SPECIFICATIONS.) |
| NF P43-023-1988 |
建筑物水管閥門.AD噴射溢出的設備.一般規范 |
(VALVES AND TAPS FOR BUILDINGS. AIR GAP WITH INJECTOR AD. GENERAL SPECIFICATIONS.) |
| NF P43-024-1988 |
建筑物水管閥門.AE衛生設施及設備.一般規范 |
(VALVES AND TAPS FOR BUILDINGS. HYGIENIC AIR GAP AE. GENERAL SPECIFICATIONS.) |
| NF P43-035-2000 |
建筑閥門.供水減壓閥和復合供水減壓閥.要求和試驗 |
(Building valves - Water pressure reducing valves and combination water pressure reducing valves - Requirements and tests.) |
| NF P43-100-2001 |
通過回流防止污染的裝置的一般要求和安裝中對適合飲用的水的污染的防止 |
(Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow.) |
| NF P45-200-1998 |
燃?xì)夤⿷?yīng).燃?xì)夤艿拦こ毯徒ㄖ?大于或等于5Bar的最大操作壓力.功能推薦 |
(Gas supply - Gas pipework for buildings - Maximum operating pressure inferior or equal to 5 bar - Functional recommendations.) |
| NF P45-200/A1-2000 |
燃?xì)夤⿷?yīng).建筑物的燃?xì)夤艿拦こ?小于或等于5巴的最大操作壓力.功能推薦 |
(Gas supply - Gas pipework for buildings - Maximum operating pressure up to and including 5 bar - Functional recommendations.) |
| NF P45-200/A2-2002 |
燃?xì)夤⿷?yīng).建筑物的燃?xì)夤艿拦こ?高達和包括5巴的最大操作壓力.功能推薦 |
(Gas supply - Gas pipework for buildings - Maximum operating pressure up to and including 5 bar - Functional recommendations.) |
| NF P45-204-1-2001 |
DTU 61.1.家用燃?xì)庠O(shè)施.第1部分:術語 |
(DTU 61.1 - Gas installation in domestic premises - Part 1 : terminology.) |
| NF P45-204-2-2001 |
DTU 61.1.家用燃?xì)庠O(shè)施.第2部分:技術規范.總安排 |
(DTU 61.1 - Gas installation in domestic premises - Partie 2 : technical specifications - General dispositions.) |
| NF P50-101-1983 |
太陽能.詞匯.第1部分:綜合 |
(SOLAR ENERGY. VOCABULARY. PART 1. GENERALS.) |
| NF P50-102-1983 |
太陽能.詞匯.第2部分.熱轉換太陽能收集器 |
(SOLAR ENERGY. VOCABULARY. PART 2. SOLAR COLLECTORS FOR HEAT CONVERSION.) |
| NF P50-103-1988 |
太陽能.有液體截?zé)釀┑臒崴驙钊萜?詞匯 |
(SOLAR ENERGY. HOT WATER TANKS HEATED BY HEAT TRANSFER FLUIDS. VOCABULARY.) |
| NF P50-301-1988 |
太陽能.太陽能球狀熱水器.熱效能測定 |
(SOLAR ENERGY. SOLAR HOT WATER TANKS. MEASUREMENT OF THERMAL PERFORMANCES.) |
| NF P50-411-1-1993 |
DTU 68-2.建筑工程.機械通風設備的制造.第1部分:技術規范 |
(DTU 68-2. BUILDING WORKS. EXECUTION OF MECHANICAL VENTILATION INSTALLATIONS. PART 1 : TECHNICAL SPECIFICATIONS.) |
| NF P50-411-2-1993 |
建筑工程.私人合同.機械通風設備的操作.第2部分:特別條款 |
(DTU 68-2. BUILDING WORKS. PRIVATE CONTRACTS. EXECUTION OF MECHANICAL VENTILATION INSTALLATIONS. PART 2 : SPECIAL CLAUSES.) |
| NF P50-503-1985 |
太陽能收集器.光學性能測量方法 |
(SOLAR ENERGY. SOLAR COLLECTORS. METHODS OF MEASUREMENT OF OPTICAL CHARACTERISTICS.) |
| NF P50-510-1985 |
太陽能.液體循環太陽能收集器.老化過程 |
(SOLAR ENERGY. SOLAR COLLECTORS USING HEAT TRANSFER LIQUID. AGEING PROCESS.) |
| NF P50-530-1-2001 |
熱太陽能系統和件.太陽能收集器.第1部分:一般要求 |
(Thermal solar systems and components - Solar collectors - Part 1 : general requirements.) |
| NF P50-530-2-2003 |
熱太陽能系統和件.太陽能集熱器.第2部分:試驗方法 |
(Thermal solar systems and components - Solar collectors - Part 2 : test methods.) |
| NF P50-531-1-2002 |
太陽熱收集系統和件.工廠制造系統.第1部分:一般要求 |
(Thermal solar systems and components - Factory made systems - Part 1 : general requirements.) |
| NF P50-531-2-2002 |
太陽熱收集系統和件.工廠制造系統.第2部分:試驗方法 |
(Thermal solar systems and components - Factory made systems - Part 2 : test methods.) |
| NF P50-601-1/A1-1998 |
DTU 65.12.建筑工程.用于家用熱水產生和供暖的使用熱傳輸液體的平面太陽能收集器.第1部分:技術規范 |
(DTU 65.12 - Building works - Plain solar collector installations using heat transfer liquid, used for heating and the production of domestic hot water - Part 1 : technical specifications.) |
| NF P50-601-1/A2-2000 |
DTU 65.12.建筑工程.用于家用熱水產生和供暖的使用熱傳輸液體的平面太陽能收集器.第1部分:技術規范 |
(DTU 65.12 - Building works - Plain solar collector installations using heat transfer liquid, used for heating and the production of domestic hot water - Part 1 : technical specifications.) |
| NF P50-601-11-1998 |
1993年NF P 50-601-1補充件1 |
() |
| NF P50-601-2-1993 |
DTU 65-12.建筑工程.私人合同.家庭取暖及家用熱水生產用普通液體傳熱太陽能收集設備.第2部分:特別條款 |
(DTU 65-12. BUILDING WORKS. PRIVATE CONTRACTS. PLAIN SOLAR COLLECTOR INSTALLATIONS USING HEAT TRANSFER LIQUID, USED FOR HEATING AND THE PRODUCTION OF DOMESTIC HOT WATER. PART 2 : SPECIAL CLAUSES.) |
| NF P50-730-1999 |
建筑物的熱性能.熱能計算.住宅 |
(Thermal performance of buildings - Calculation of energy use for heating - Residential buildings.) |
| NF P50-731-1996 |
建筑構件和建筑件.耐熱性和熱傳導.計算方法 |
(BUILDING COMPONENTS AND BUILDING ELEMENTS. THERMAL RESISTANCE AND THERMAL TRANSMITTANCE. CALCULATION METHOD. (EUROPEAN STANDARD EN ISO 6946).) |
| NF P50-731/A1-2003 |
建筑部件與構件.熱阻和熱傳導系數.計算方法 |
(Building components and building elements - Thermal resistance and thermal transmittance - Calculation method.) |
| NF P50-732-1-1995 |
高層建筑中的熱橋.熱流和表面溫度.第1部分:一般計算方法 |
(THERMAL BRIDGES IN BLUILDING CONSTRUCTION. HEAT FLOWS AND SURFACE TEMPERATURES. PART 1 : GENERAL CALCULATION METHODS. (EUROPEAN STANDARD EN ISO 10211-1).) |
| NF P50-732-2-2002 |
房屋建筑中的熱橋.熱流量和表面溫度的計算.第2部分:線性熱橋 |
(Thermal bridges in building construction - Calculation of heat flows and surface temperatures - Part 2 : linear thermal bridges.) |
| NF P50-733-1998 |
建筑設備和工業裝置的熱絕緣.計算規則 |
(Thermal insulation for building equipment and industrial installations. Calculation rules.) |
| NF P50-736-1999 |
建筑物的熱性能.經由地面的熱傳遞.計算方法(EN 13370) |
(Thermal performance of buildings. Heat transfer via the ground. Calculation methods.) |
| NF P50-737-1-2000 |
門窗和百葉窗的熱性能.熱傳遞系數的計算.第1部分:簡化法 |
(Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 1 : simplified method.) |
| NF P50-740-1996 |
熱絕緣.物理量與定義 |
(Thermal insulation. Physical quantities and definitions.) |
| NF P50-741-1996 |
熱絕緣.材料的熱傳導條件和性能.詞匯 |
(Thermal insulation. Heat transfer conditions and properties of materials. Vocabulary.) |
| NF P50-742-1996 |
熱絕緣.散熱傳遞.物理的量值和定義 |
(Thermal insulation. Heat transfer by radiation. Physical quantities and definitions.) |
| NF P50-743-1996 |
熱絕緣.質量轉移.物理量和定義 |
(Thermal insulation. Mass transfer. Physical quantities and definitions.) |
| NF P50-744-1996 |
熱絕緣.圓管熱絕緣的穩態熱傳導性能測定(歐洲標準EN ISO 8497) |
(Thermal insulation. Determination of steady-state thermal transmission properties of thermal insulation for circular pipes.) |
| NF P50-745-2001 |
建筑物的熱性能.地基防凍脹的熱設計 |
(Thermal performance of buildings - Thermal design of foundations to avoid frost heave.) |
| NF P50-746-2000 |
建筑物結構中的熱橋.線性熱閥門.簡化方法和無效閥門 |
(Thermal bridges in building construction - Linear thermal transmittance - Simplified methods and default values.) |
| NF P50-748-1996 |
熱絕緣.穩定狀態熱傳導性能的測定.校正及屏蔽的隔熱箱(歐洲標準EN ISO 8990) |
(Thermal insulation. Determination of steady-state thermal transmission properties. Calibrated and guarded hot box.) |
| NF P50-749-1-1999 |
建筑產品及件的熱性能.評估實驗室測量熱傳遞性能的特定標準.第1部分:通用標準 |
(Thermal performance of building products and components. Specific criteria for the assessment of laboratories measuring heat transfer properties. Part 1 : common criteria.) |
| NF P50-749-2-1999 |
建筑產品及件的熱性能.評估實驗室測量熱傳遞性能的特定標準.第2部分:保溫板測量法 |
(Thermal performance of building products and components. Specific criteria for the assessment of laboratories measuring heat transfer properties. Part 2 : measurements by guarded hot plate method.) |
| NF P50-749-3-1999 |
建筑產品及件的熱性能.評估實驗室測量熱傳遞性能的特定標準.第3部分:熱流量計測量法 |
(Thermal performance of building products and components. Specific criteria for the assessment of laboratories measuring heat transfer properties. Part 3 : measurements by heat flow meter method.) |
| NF P50-749-4-2000 |
建筑物產品和件的熱性能.實驗室測量熱傳輸性能的評價的特殊標準.第4部分:熱盒法測量 |
(Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 4 : measurements by hot box methods.) |
| NF P50-749-5-2000 |
建筑物產品和件的熱性能.實驗室測量熱傳輸性能的評價的特殊標準.第5部分:管道實驗方法測量 |
(Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 5 : measurements by pipe test methods.) |
| NF P50-750-1998 |
建筑物熱性能.使用熱流計用熱盒法對熱抗性的測定.磚石結構.(歐洲標準EN 1934) |
(Thermal performance of buildings. Determination of thermal resistance by hot box method using heat flow meter. Masonry.) |
| NF P50-752-2000 |
建筑物熱性能.建筑物件和單的空氣滲透性.實驗室試驗方法 |
(Thermal performance of buildings - Air permeability of building components and building elements - Laboratory test method.) |
| NF P50-753-1-2001 |
門和窗的熱性能.用熱盒法對熱傳輸?shù)臏y(cè)定.第1部分:完整的門窗 |
(Thermal performance of windows and doors - Determination of thermal transmittance by hot box method - Part 1 : complete windows and doors.) |
| NF P50-754-2000 |
建筑材料和產品的濕熱性能.通過在提高的溫度下干燥對潮氣含量的測定 |
(Hygrothermal performance of building materials and products - Determination of moisture content by drying at elevated temperature.) |
| NF P50-755-2003 |
建筑材料和產品的溫濕性能.部分浸入法測定吸水系數 |
(Hygrothermal performance of building materials and products - Determination of water absorption coefficient by partial immersion.) |
| NF P50-757-2000 |
建筑材料和產品.濕熱性能.列表設計的閥門 |
(Building materials and products - Hygrothermal properties - Tabulated design values.) |
| NF P50-758-2000 |
建筑材料的濕熱性能.濕熱吸收特性的測定 |
(Hygrothermal performance of building materials - Determination of hygroscopic sorption properties.) |
| NF P50-759-2001 |
建筑物的熱性能.空氣滲透率的測定.風扇增壓法 |
(Thermal performance of buildings - Determination of air permeability of buildings - Fan pressurization method.) |
| NF P50-760-2002 |
建筑構件和建筑件的濕溫性能.脈動式空氣壓力下外墻耐雨水的測定 |
(Hygrothermal performance of building components and building elements - Determination of the resistance of external wall systems to driving rain under pulsating air pressure.) |
| NF P50-761-2001 |
建筑材料和產品的熱性能.用防護熱板和熱流量計法測定熱阻.厚產品的高熱阻和中熱阻 |
(Thermal performance of building materials and products - Determination of thermal resistande by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resis) |
| NF P50-763-2001 |
建筑材料和產品的冷熱性能.水蒸氣傳輸性能的測定 |
(Hygrothermal performance of building materials and products - Determination of water vapour transmission properties.) |
| NF P50-765-2000 |
建筑材料和產品的濕熱性能.濕熱膨脹系數的測定 |
(Hygrothermal performance of building materials and products - Determination of hygric expansion coefficient.) |
| NF P50-766-2001 |
建筑部件的濕熱性能.防止臨界表面潮濕和填隙式冷凝的內表面溫度.計算方法 |
(Hygrothermal performance of building components and building elements - Internal surface temperature to avoid critical surface humidity and interstitial condensation - Calculation methods.) |
| NF P50-767-2003 |
建筑物的隔熱.建筑物中換氣率的測定.示蹤氣體稀釋法 |
(Thermal insulation in buildings - Determination of air change in buildings - Tracer gas dilution method.) |
| NF P50-768-2003 |
建筑設備和工業裝置用隔熱產品.申報的導熱性的測定 |
(Thermal insulation products for building equipment and industrial installations - Determination of declared thermal conductivity.) |
| NF P50-770-2002 |
建筑物的設備和工業設施的濕熱性能.水蒸汽擴散的計算方法.冷水管的絕緣系統 |
(Hygrothermal performance of building of equipment and industrial installations - Calculation of water vapour diffusion - Cold pipe insulations systems.) |
| NF P51-001-2003 |
煙囪.一般要求 |
(Chimneys - General requirements.) |
| NF P51-002-1-2003 |
煙囪.熱和流體動態計算方法.第1部分:適合一種器具的煙囪 |
(Chimneys - Thermal and fluid dynamic calculation methods - Part 1 : chimneys serving one appliance.) |
| NF P51-201/A1-1999 |
DTU 24-1.建筑工程.煙道工程.技術規范 |
(DTU 24.1 - Building works - Flue duct work - Technical specifications.) |
| NF P51-201/A2-2000 |
DTU 24-1.建筑工程.煙道工程.技術規范 |
(DTU 24.1 - Buildings works - Flue duct work - Technical specifications.) |
| NF P51-202/A1-2000 |
DTU 24.2.1.建筑工程.不安裝只用木材當燃料的加熱裝置或開放壁爐.技術規范 |
(DTU 24.2.1 - Building works - Open fireplaces fitted or not with heat regenerator using only wood for fuel - Technical specifications.) |
| NF P51-203/A1-2000 |
DTU 24.2.1.建筑工程.內部只用插有木材當燃料的加熱裝置或封閉壁爐.技術規范 |
(DTU 24.2.2 - Building works - Closing fireplaces or fitted with insert using only wood for fuel - Technical specifications.) |
| NF P51-204-1-1995 |
建筑工程.固體礦物燃料和木材燃燒用帶有閉式壁爐或內部安裝的器具的煙囪.第1部分:技術規范 |
(DTU 24-2-3. BUILDING WORKS. CHIMNEYS WITH CLOSED FIREPLACE OR BUILT-IN APPLIANCE FOR BURNING OF SOLID MINERAL FUEL AND WOOD. PART 1 : TECHNICAL SPECIFICATIONS.) |
| NF P51-301-1974 |
煙囪建造用粘土磚 |
(CLAY BRICKS FOR THE CONSTRUCTION OF SMOKE PIPES.) |
| NF P51-302-1975 |
煙囪建造用耐火磚 |
(REFRACTORY BRICKS FOR THE CONSTRUCTION OF FLUE PIPES.) |
| NF P51-311-2001 |
煙囪.單壁煙囪用粘土/陶瓷燃料塊.要求和試驗方法 |
(Chimneys - Clay/ceramic flue blocks for single wall chimneys - Requirements and test methods.) |
| NF P51-401-1999 |
煙囪.粘土/混凝土煙氣線.要求和試驗方法(EN 1457) |
(Chimneys. Clay/Ceramic Flue Liners. Requirements and test methods.) |
| NF P51-405-2003 |
煙囪.泥土/陶瓷煙囪帽的要求和試驗方法 |
(Chimneys - Requirements and test methods for clay/ceramic flue terminals.) |
| NF P51-501-2001 |
獨立的工業煙囪.第1部分:一般要求 |
(Free-standing industrial chimneys - Part 1 : general requirements.) |
| NF P51-502-2002 |
獨立式煙囪.第2部分:水泥煙囪 |
(Free-standing chimneys - Part 2 : concrete chimneys.) |
| NF P51-504-2003 |
獨立式煙囪.第4部分:磚襯.設計和施工 |
(Free-standing chimneys - Part 4 : brick liners - Design and execution.) |
| NF P52-001-1975 |
取暖設備用安全閥.一般技術規范 |
(SAFETY VALVES FOR HEATING INSTALLATIONS.) |
| NF P52-002-1-1989 |
散熱器恒溫閥.第1部分:試驗方法的要求 |
(Thermostatic radiator valves. Part 1 : requirements and test methods.) |
| NF P52-011-1-1996 |
散熱器和換流器.第1部分:技術規范和要求 |
(Radiators and convectors. Part 1 : technical specifications and requirements.) |
| NF P52-011-1/A1-2003 |
散熱器和對流器.第1部分:技術規范和要求 |
(Radiators and convectors - Part 1 : technical specifications and requirements.) |
| NF P52-011-2-1997 |
散熱器和換流器.第2部分:測試方法和額定值 |
(Radiators and convectors. Part 2 : test methods and rating.) |
| NF P52-011-2/A1-2000 |
散熱器和對流器.第2部分:試驗方法和額定功率 |
(Radiators and convectors - Part 2 : test methods and rating.) |
| NF P52-011-2/A2-2003 |
散熱器和對流器.第2部分:試驗方法和額定功率 |
(Radiators and convectors - Part 2 : test methods and rating.) |
| NF P52-011-3-1997 |
散熱器和換流器.第3部分:一致性評定(歐洲標準EN 442-3) |
(Radiators and convectors. Part 3 : evaluation of conformity.) |
| NF P52-011-3-2004 |
散熱器和換流器.第3部分:合格評定 |
(Radiators and convectors - Part 3 : evaluation of conformity.) |
| NF P52-101-2000 |
泵.旋轉動力泵.加熱裝置和家用熱水裝置用電效應不足200W的循環泵.要求、試驗和標記 |
(Pumps - Rotodynamic pumps - Circulation pumps having an electrical effect not exceeding 200 W for heating installations and domestic hot water installations - Requirements, testing, marking.) |
| NF P52-203-1993 |
DTU 65-11.建筑工程.建筑物內集中供暖設備的安全系統.技術規范 |
(DTU 65-11. Building works. Safety systems for central heating installations in buildings. Technical specifications.) |
| NF P52-211-1/A1-2000 |
DTU 65.3.建筑工程.壓力熱水的熱交換裝置.技術規范 |
(DTU 65.3 - Building works - Heat exchange installations for pressurised hot water - Part : Technical specifications.) |
| NF P52-211-2-1993 |
DTU 65-3.建筑工程.私人合同.承壓熱水用熱交換設備.第2部分:專門條款 |
(DTU 65-3. BUILDING WORKS. PRIVATE CONTRACTS. HEAT EXCHANGE INSTALLATIONS FOR PRESSURIZED HOT WATER. PART 2 : SPECIAL CLAUSES.) |
| NF P52-302-1-1993 |
建筑工程.通過混凝土電纜裝置進行樓道取暖.第1部分:技術規范 |
(DTU 65-7. BUILDING WORKS. EXECUTION OF FLOOR HEATING THROUGH ELECTRIC CABLES SET IN CONCRETE. PART 1 : TECHNICAL SPECIFICATIONS.) |
| NF P52-302-1/A1-1999 |
DTU 65.7.NF P 52-302-1-1993的補充件1 |
() |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com