標準號 |
中文名稱 |
英文名稱 |
| NF C20-707-1994 |
基本環境試驗.第2部分:試驗方法.GA試驗指南:加速度,靜止?fàn)顟B(tài) |
(Basic environmental testing procedures. Part 2 : tests. Test Ga and guidance : acceleration, steady state.) |
| NF C20-709-2000 |
環境試驗.第2部分:試驗.太陽輻射試驗指南 |
(Environmental testing - Part 2 : tests - Guidance for solar radiation testing.) |
| NF C20-710-1989 |
環境試驗.試驗方法.J試驗和導則:霉菌生長 |
(Environmental testing. Test methods. Test J and guidance : mould growth.) |
| NF C20-711-1999 |
基本環境試驗.第2部分:試驗方法.KA試驗:鹽霧 |
(Environmental testing. Part 2 : tests. Test Ka : salt mist.) |
| NF C20-713-1999 |
基本環境試驗.第2部分:試驗方法.m試驗:低氣壓 |
(Environmental testing. Part 2 : tests. Test M : low air pressure.) |
| NF C20-714-2000 |
環境試驗.第2部分:試驗.試驗N:溫度變化 |
(Environmental testing - Part 2 : tests - Test N : change of temperature.) |
| NF C20-717-1995 |
環境試驗.第2部分:試驗.試驗Q:密封 |
(Environmental testing. Part 2 : tests. Test Q : sealing.) |
| NF C20-718-2001 |
環境試驗.第2-18部分:試驗.試驗R和指南:水 |
(Environmental testing - Part 2-18 : tests - Test R and guidance : water.) |
| NF C20-720-1987 |
基本環境試驗程序.試驗方法.試驗T:錫焊 |
(Basic environmental testing procedures. Test methods. Test T : soldering.) |
| NF C20-720/A1-1988 |
NF C 20-720-1987的補充1 |
() |
| NF C20-7201-1988 |
氣候的基本試驗和機械堅固性的基本試驗.試驗方法.T試驗:可焊性 |
() |
| NF C20-721-2001 |
環境試驗.第2-21部分:試驗.試驗U:接線端子和整體安裝裝置的牢固性 |
(Environmental testing - Part 2-21 : tests - Test U : robustness of terminations and integral mounting devices.) |
| NF C20-7212-1998 |
環境試驗.第2部分;試驗方法.U 試驗.終端和集成組裝器件的耐用性.第2次補充 |
() |
| NF C20-7213-1998 |
環境試驗.第2部分;試驗方法.U 試驗.終端和集成組裝器件的耐用性.第3次補充 |
() |
| NF C20-727-1994 |
基本環境測試.第2部分:試驗.EA試驗指南:沖擊 |
(Basic environmental testing procedures. Part 2 : tests. Test Ea and guidance : shock.) |
| NF C20-729-1994 |
基本環境試驗方法.第2部分:試驗.試驗EB指南:震動 |
(Basic environmental testing procedures. Part 2 : tests. Test Eb and guidance : bump.) |
| NF C20-730-1999 |
環境試驗.第2部分:試驗.試驗DB和指南:循環濕熱試驗(12加12小時循環) |
(Environmental testing. Part 2 : tests. Test Db and guidance : damp heat, cyclic (12 plus 12 hour cycle).) |
| NF C20-731-1994 |
基本環境測試第2部分:試驗方法.EC試驗和指南摔倒.材料上第一落點的試驗 |
(Basic environmental testing procedures. Part 2 : tests. Test Ec : drop and topple, primarily for equipment-type specimens.) |
| NF C20-732-1994 |
基本環境試驗規程.第2部分:試驗.第32節:試驗Ed:自由跌落 |
(Basic environmental testing procedures. Part 2 : tests. Test Ed : free fall.) |
| NF C20-733-2000 |
環境試驗.第2部分:試驗.溫度變化試驗指南 |
(Environmental testing - Part 2 : tests - Guidance on change of temperature tests.) |
| NF C20-734-1987 |
氣侯的基本試驗和機械堅固性的基本試驗.試驗方法.Fd試驗.在寬帶上的隨機振動.一般要求 |
(Basic environmental testing procedures. Test methods. Test Fd : random vibration wide band. General requirements.) |
| NF C20-735-1987 |
氣侯的基本試驗和機械堅固性的基本試驗.試驗方法.Fda 試驗.在寬帶上的隨機振動.重復性高 |
(Basic environmental testing procedures. Test methods. Test Fda : randim vibration wide band. Reproducibility.) |
| NF C20-736-1987 |
氣侯的基本試驗和機械堅固性的基本試驗.試驗方法.Fdb 試驗.在寬帶上的隨機振動.中等重復性 |
(Basic environmental testing procedures. Test methods. Test Fdb : random vibration wide band. Reproducibility medium.) |
| NF C20-737-1987 |
氣侯的基本試驗和機械堅固性的基本試驗.試驗方法.Fdc 試驗.在寬帶上的隨機振動.重復性低 |
(Basic environmental testing procedures. Test methods. Test Fdc : random vibration wide band. Reproductibility low.) |
| NF C20-738-1999 |
環境測試.第2部分:試驗.試驗 Z/AD:混合溫度/濕度循環試驗 |
(Environmental testing. Part 2 : tests. Test Z/AD : composite temperature/humidity cyclic test.) |
| NF C20-739-1999 |
環境試驗.第2部分:試驗.試驗Z/AMD:結合連續寒冷、低氣壓和濕熱的試驗 |
(Environmental testing. Part 2 : tests. Test Z/AMD : combined sequential cold, low air pressure and damp heat test.) |
| NF C20-740-2000 |
環境試驗.第2部分:試驗.試驗Z/AM:冷/低氣壓結合試驗 |
(Environmental testing - Part 2 : tests - Test Z/AM : combined cold/low air pressure tests.) |
| NF C20-741-2000 |
環境試驗.第2部分:試驗.試驗Z/BM:干熱/低氣壓組合試驗 |
(Environmental testing - Part 2 : tests - Test Z/BM : combined dry heat/low air pressure tests.) |
| NF C20-744-1995 |
環境試驗.第2部分:試驗.試驗T指南:焊料 |
(Environmental testing. Part 2 : tests. Guidance on test T : soldering.) |
| NF C20-745-1993 |
環境試驗.第2部分:試驗.Xa試驗和導則:清潔溶劑浸設試驗 |
(Environmental testing. Part 2 : tests. Test Xa and guidance : immersion in cleaning solvents.) |
| NF C20-745/A1-1994 |
環境試驗.第2部分:試驗. Xa和指南:在清潔溶劑中浸沒 |
(Environmental testing. Part 2 : tests. Test Xa and guidance : immersion in cleaning solvents.) |
| NF C20-7451-1994 |
IEC出版物68-2-45的修改件:試驗XA和導則.浸沒和洗滌溶劑 |
() |
| NF C20-747-2000 |
環境試驗.第2-47部分:試驗方法.件、設備以及其他振動、沖擊和及類似動力試驗用的物品的安裝 |
(Environmental testing - Part 2-47 : test methods - Mounting of components, equipment and other articles for vibration, impact and similar dynamic tests.) |
| NF C20-748-2000 |
環境試驗.第2部分:試驗.應用IEC 60068的試驗來模擬貯存影響的指南 |
(Environmental testing - Part 2 : tests - Guidance on the application of the test of IEC 60068 to simulate the effects of storage.) |
| NF C20-750-2000 |
環境試驗.第2部分:試驗.試驗 Z/AFc:散熱和非散熱試樣的低溫/振動(正弦)組合試驗 |
(Environmental testing - Part 2 : tests - Tests Z/AFc : combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens.) |
| NF C20-751-2000 |
環境試驗.第2部分:試驗 Z/BFc:熱擴散樣品和非熱擴散樣品的干熱/振動(正弦)試驗 |
(Environmental testing - Part 2 : tests - Tests Z/BFc : combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens.) |
| NF C20-752-1996 |
環境試驗.第2部分:試驗.試驗KB:鹽霧循環(氯化鈉溶液) |
(environmental testing. Part 2 : tests. Test Kb : salt mist, cyclic (sodium chloride solution).) |
| NF C20-755-1994 |
基本環境試驗規程.第2部分:試驗.第55節:試驗Ee及導則:顫動 |
(Basic environmental testing procedures. Part 2 : tests. Test Ee and guidance bounce.) |
| NF C20-757-2001 |
環境試驗.第2-57部分:試驗.試驗Ff:振動.時間關系法 |
(Environmental testing - Part 2-57 : tests - Test Ff : vibration - Time-history method.) |
| NF C20-758-1990 |
環境試驗.試驗方法.TD試驗可釬焊性敷鍍金屬抗溶性和表面件抗焊接熱強度測定 |
(Environmental testing. Test methods. Test Td : solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (smd).) |
| NF C20-759-1994 |
環境試驗.第2部分:試驗方法;第59節:試驗Fe:振動;正弦跳動法 |
(Environmental testing. Part 2 : test methods. Test Fe : vibration sine beat method.) |
| NF C20-760-1996 |
環境試驗.第2部分:試驗.試驗Ke:流動混合氣體的腐蝕試驗 |
(Environmental testing. Part 2 : tests. Test Ke : flowing mixed gas corrosion test.) |
| NF C20-761-1994 |
環境試驗.第2部分:試驗方法.試驗Z/ABDM:氣候順序圖 |
(Environmental testing. Part 2 : test methods. Test Z/ABDM : climatic sequence.) |
| NF C20-764-1995 |
環境試驗.第2部分:試驗方法.試驗Fh:寬頻帶隨機振動和指南 |
(Environmental testing. Part 2 : test methods. Test Fh : vibration, broad band random (digital control) and guidance.) |
| NF C20-765-1998 |
環境試驗.第2部分:試驗方法.試驗Fg:聲音誘發振動 |
(Environmental testing. Part 2 : methods of test. Test Fg : vibration, acoustically induced.) |
| NF C20-766-1995 |
環境試驗.第二部分:試驗方法.溫?zé)釛l件下的穩定性 |
(Environmental testing. Part 2 : test methods. Test Cx : damp heat, steady state (unsatured pressurized vapour).) |
| NF C20-767-1998 |
環境試驗.第2部分:試驗.試驗CY:主要用于部件的恒定濕熱加速試驗(歐洲標準EN 60 068-2-67) |
(Environmental testing. Part 2 : tests. Test Cy : damp heat, steady state, accelerated test primarily intended for components.) |
| NF C20-768-1998 |
環境試驗.第2部分:試驗.試驗L:灰塵和沙 |
(Environmental testing. Part 2 : tests. Test L : dust and sand.) |
| NF C20-769-1998 |
環境試驗.第2部分:試驗.試驗Te:加濕平衡法對表面安裝技術用電子件進行可焊性試驗 |
(Environmental testing. Part 2 : tests. Test Te : solderability testing of electronic components for surface mount technology by the wetting balance method.) |
| NF C20-770-1996 |
環境試驗.第2部分:試驗.試驗XB:手和手指磨擦引起的符號及文字的磨蝕 |
(Environmental testing. Part 2 :tests. Test Xb : abrasion of markings and letterings caused by rubbing of fingers and hands.) |
| NF C20-774-2000 |
環境試驗.第2部分:試驗.試驗Xa:流體污染 |
(Environmental testing - Part 2 : tests - Test Xc : fluid contamination.) |
| NF C20-775-1998 |
環境試驗.第2部分:試驗.試驗Eh:錘擊試驗 |
(Environmental testing. Part 2 : tests. Test Eh : hammer tests.) |
| NF C20-777-2001 |
環境試驗.第2-77部分:試驗.試驗77:整體強度和沖擊 |
(Environmental testing - Pat 2-77 : tests - Test 77 : body strength and impact shock.) |
| NF C20-778-2002 |
環境測試.第2-78部分: 試驗-試驗 Cab: 濕熱和穩態 |
(Environmental testing - Part 2-78 : tests - Test Cab : damp heat, steady state.) |
| NF C20-790-2-1-2003 |
靜電學.第2-1部分:材料和產品損耗靜電荷的能力的測量方法 |
(Electrostatics - Part 2-1 : measurement methods - Ability of materials and products to dissipate static electric charge.) |
| NF C20-790-2-3-2001 |
靜電.第2-3部分:對用于防止靜電積累的固體平面材料耐性測定的試驗方法. |
(Electrostatics - Part 2-3 : methods of test for determining the resistance and reisistivity of solid planar materials used to avoid electrostatic charge accumulation.) |
| NF C20-790-4-1-1997 |
靜電.第4部分;專用標準測試方法.第1節:地板鋪面和已安裝地板的靜電性能 |
(Electrostatics. Part 4 : standard test methods for specific applications. Section 1 : electrostatic behaviour of floor coverings and installed floors.) |
| NF C20-790-4-3-2002 |
靜電學.第4-3部分:特殊應用的標準試驗方法.鞋類 |
(Electrostatics - Part 4-3 : standard test methods for specific applications - Footwear.) |
| NF C20-790-5-1-2001 |
靜電學.第5-1部分:有靜電現象的電子設備的保護.一般要求 |
(Electrostatics - Part 5-1 : protection of electronic devices from electrostatic phenomena - General requirements.) |
| NF C20-790-5-2-2001 |
靜電學.第5-2部分:有靜電現象的電子設備的保護.用戶指南 |
(Electrostatics - Part 5-2 : Protection of electronic devices from electrostatic phenomena - User guide.) |
| NF C20-907-2000 |
固體非金屬材料暴露于引燃源的可燃性.試驗方法清單 |
(Flammability of solid non metallic materials when exposed to flame sources - List of test methods.) |
| NF C20-911-1-30-2003 |
著火危險試驗.第1-30部分:電工產品著火危險評定指南.預選試驗規程的使用 |
(Fire hazard testing - Part 1-30 : guidance for assessing the fire hazard of electrotechnical products - Use of preselection testing procedures.) |
| NF C20-911-10-2000 |
著火危險試驗.第11-10部分:試驗火焰.50W水平和垂直火焰試驗法 |
(Fire hazard testing - Part 11-10 : test flames - 50 W horizontal and vertical flame test methods.) |
| NF C20-911-20-2000 |
著火危險試驗.第11-20部分:試驗火焰.500W火焰試驗法 |
(Fire hazard testing - Part 11-20 : test flames - 500 W flame test methods.) |
| NF C20-911-2000 |
防火試驗.第1-1部分:評定電工產品防火性的指南.一般導則 |
(Fire hazard testing - Part 1-1 : guidance for assessing the fire hazard of electrotechnical products - General guidelines.) |
| NF C20-921-0-1997 |
火險試驗.第2部分:試驗方法.第1節/0活頁:熾熱絲試驗方法.總則(歐洲標準EN 60 695-2-1-0) |
(FIRE HAZARD TESTING. PART 2 : TEST METHODS. SECTION 1/SHEET 0 : GLOW-WIRE TEST METHODS. GENERAL. (EUROPEAN STANDARD EN 60 695-2-1-0).) |
| NF C20-922-1994 |
火險試驗.第2部分:試驗方法.第2節:針型火焰燃燒試驗 |
(Fire hazard testing. Part 2 : test methods. Section 2 : needle-flame test.) |
| NF C20-924-0-1994 |
火災試驗.第2部分:試驗方法.第4節:活頁0:擴散型和混合型火焰試驗法 |
(Fire hazard testing. Part 2 : test methods. Section 4 : sheet 0 : diffusion type and premixed type flame test methods.) |
| NF C20-924-1-1994 |
火災試驗.第2部分:試驗方法.第4節:活頁1:1kw標準混合型火焰試驗和指南 |
(Fire hazard testing. Part 2 : test methods. Section 4 : sheet 1 : 1 kw nominal pre-mixed test flame and guidance.) |
| NF C20-924-10-3-2002 |
著火危險試驗.第10-3部分:異常熱度.模應力降低變形試驗 |
(Fire hazard testing - Part 10-3 : abnormal heat - Mould stress relief distortion test.) |
| NF C20-924-2-10-2001 |
火災危害試驗.第2-10部分:基于輝光燈絲的試驗方法.輝光裝置和通用試驗程序 |
(Fire hazard testing - Part 2-10 : glowing/out-wire based test method - Glow-wire apparatus and common test procedure.) |
| NF C20-924-2-11-2001 |
火災危險試驗.第2-11部分:熱線試驗方法.最終產品的熱線易燃性試驗方法 |
(Fire hazard testing - Part 2-11 : glowing/hot-wire based test methods - Glow-wire flammability test method for end-products.) |
| NF C20-924-2-12-2001 |
火災危險試驗.第2-12部分:熱線試驗方法.材料的熱線易燃性試驗方法 |
(Fire hazard testing - Part 2-12 : glowing/hot-wire based test methods - Glow-wire flammability test method for materials.) |
| NF C20-924-2-13-2001 |
火焰危害試驗.第2-13部分:發光/熱焰試驗方法.材料的熱焰點火試驗 |
(Fire hazard testing - Part 2-13 : glowing/hot-wire based test methods - Glow-wire ignitability test method for materials.) |
| NF C20-924-5-1-2003 |
著火危險試驗.第5-1部分:燃燒廢氣產生的腐蝕破壞作用.一般指南 |
(Fire hazard testing - Part 5-1 : corrosion damage effects of fire effluent - General guidance.) |
| NF C20-924-6-1-2002 |
著火危險試驗.第6-1部分:煙阻光度.一般指南 |
(Fire hazard testing - Part 6-1 : smoke opacity - General guidance.) |
| NF C20-940-1990 |
著火危險試驗.第4部分:火災試驗術語 |
(Fire hazard testing. Part 4 : terminology concerning fire tests.) |
| NF C20-951-1994 |
著火危險試驗.第5部分:滅火液體腐蝕損壞的評定.第1節:總則 |
(Fire hazard testing. Part 5 : assessment of potential corrosion damage by fire effluent. Section 1 : general guidance.) |
| NF C20-971-2000 |
著火危險試驗.第7部分:將火中電工產品產生的毒性危害降至最小的指南.第1節:總則 |
(Fire hazard testing - Part 7 : guidance on the minimization of toxic hazards due to fires involving electrotechnical products - Section 1 : General.) |
| NF C20-981-2001 |
火災試驗.第8-1部分:熱的釋放.一般指南 |
(Fire hazard testing - Part 8-1 : heat release - General guidance.) |
| NF C20-991-2000 |
著火危險試驗.第9-1部分:火焰的表面擴展.通用指南 |
(Fire hazard testing - Part 9-1 : surface spread of flame - General guidance.) |
| NF C23-241-2-2-2001 |
易燃粉塵場地中使用的電氣設備.第2部分:試驗方法.第2節:粉塵層中電阻系數的測定方法 |
(Electrical appartus for use in the presence of combustible dust - Part 2 : test methods - Section 2 : method for determining the electrical resistivity of dust in layers.) |
| NF C23-503-2000 |
在空氣受到沼氣和煤塵的侵害下I組M1類設備保持的功能 |
(Group I, category M1 equipment intended to remain functional in atmospheres endangered by firedamp and/or coal dust.) |
| NF C23-514-1999 |
潛在爆炸環境用電氣設備.總要求 |
(ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES. GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 50 014).) |
| NF C23-515-1999 |
潛在爆炸環境用電氣設備.油浸“O“ |
(Electrical apparatus for potentially explosive atmospheres. Oil immersion “o“.) |
| NF C23-516-1998 |
防爆電氣設備.壓力裝置P |
(Electrical apparatus for potentially explosive atmospheres. Pressurized apparatus “p“.) |
| NF C23-517-1999 |
潛在爆炸環境用電氣設備.粉末填充“q“ |
(Electrical apparatus for potentially explosive atmospheres. Powder filling “q“.) |
| NF C23-518-1996 |
防爆電氣設備.防爆外殼“D“ |
(Electrical apparatus for potentially explosive atmospheres. Flameproof enclosures “D“.) |
| NF C23-5182-1983 |
C 23-518-82的補充2 |
() |
| NF C23-5183-1986 |
補充3 |
() |
| NF C23-5193-1986 |
補充3 |
() |
| NF C23-520-1995 |
防爆電氣設備.內在安全“I“ |
(Electrical apparatus for potentially explosive atmospheres. Intrinsic safety “i“.) |
| NF C23-5202-1986 |
NF C23-520-82的補充2 |
() |
| NF C23-521-2000 |
潛在爆炸性氣體環境用電器.“n“型防護裝置 |
(Electrical apparatus for potentially explosive atmospheres - Type of protection “n“.) |
| NF C23-528-1987 |
防爆電氣設備.易燃材料靜電噴涂設備的選擇.安裝和使用的要求.第1部分:手持式靜電噴涂槍 |
(ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES. ENCAPSULATION “M“. (EUROPEAN STANDARD EN 50 028).) |
| NF C23-533-1-2002 |
對沼氣敏感的礦工用頭燈.第1部分.總要求.爆炸風險的推定和檢驗 |
(Caplights for use in mines susceptible to firedamp - Part 1 : general requirements - Construction and testing in relation to the risk of explosion.) |
| NF C23-533-2-2002 |
對沼氣敏感的礦井用礦燈.第2部分:性能和安全相關問題 |
(Caplights for use in mines susceptible to firedamp - Part 2 : performance and other safety-related matters.) |
| NF C23-539-1981 |
防爆電氣設備.內部安全“i” 的電氣系統(歐州標準EN50 039) |
(ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES. INTRINSICALLY SAFE ELECTRICAL SYSTEMS “I“. (EUROPEAN STANDARD EN 50 039).) |
| NF C23-544-2000 |
家用易燃?xì)怏w監測用電器設備.選擇、安裝、使用和維修指南 |
(Electrical apparatus for the detection of combustible gases in domestic premises - Guide on the selection, installation, use and maintenance.) |
| NF C23-548-2002 |
不易燃液體噴涂材料用自動靜電噴涂設備 |
(Automatic electrostatic spraying equipment for non-flammable liquid spraying material.) |
| NF C23-550-2002 |
潛在易爆環境中用的電氣裝置.手持式靜電噴涂設備 |
(Electrical apparatus for potentially explosive atmospheres - Electrostatic hand-held spraying equipment.) |
| NF C23-553-1-1987 |
可燃物品用靜電噴涂設備的使用.安置及選擇規則.第1部分:極限能量為0.24MJ.并帶輔助裝置的涂料手持式靜電噴 |
() |
| NF C23-553-2-1992 |
可燃物用靜電噴射設備的選擇、安裝和使用的要求.第2部分:極限能量為5MJ的手持靜電粉末噴射槍及輔助設備 |
() |
| NF C23-553-3-1992 |
可燃物品用靜電噴涂設備的選擇、安裝和使用要求.第3部分:極限能量為0.24MJ或5MJ的手持靜電絨絮噴射槍及輔助 |
() |
| NF C23-554-1992 |
可燃性氣體的檢測和測量電器儀表.一般要求和試驗方法 |
(Electrical apparatus for the detection and measurement of combustible gases. General requirements and test methods.) |
| NF C23-554/A1-1998 |
探測用電器和測量可燃?xì)怏w.一般要求和檢驗方法.NF EN 50 054-1992的修改件1 |
() |
| NF C23-5541-1998 |
1992年NF C 23-554 補充件1 |
() |
| NF C23-555-1992 |
可燃性氣體的檢測和測量電氣儀表.測量空氣中沼氣含量不超過5%的I組電氣儀表的性能要求 |
(Electical apparatus for the detection and measurement of combustible gases. Performance requirements for group I apparatus indicating up to 5 per cent (V/V) methane in air.) |
| NF C23-555/A1-1998 |
NF EN 50055-1992的修改件1 |
() |
| NF C23-5551-1998 |
1992年NF C 23-555的補充件1 |
() |
| NF C23-556-1992 |
可燃性氣體檢測和測量電氣儀表.測量空氣中沼氣含量為100%及其以下的I組電氣儀表的性能要求 |
(Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for group I apparatus indicating up to 100 per cent (V/V) methane in air.) |
| NF C23-556/A1-1998 |
NF EN 50056-1992的修改件1 |
() |
| NF C23-5561-1998 |
1992年NF C 23-556的補充件1 |
() |
| NF C23-557-1992 |
可燃性氣體的檢測和測量電氣儀表.測量低于爆炸極限100%以下的Ⅱ組電氣儀表的性能要求 |
(Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for group II apparatus indicating up to 100 per cent lower explosive limit.) |
| NF C23-558-1992 |
可燃性氣體檢測和測量電氣儀表.測量瓦斯為100%及其以下的Ⅱ組電氣儀表的性能要求 |
(Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for group II apparatus indicating up to 100 per cent (V/V) gas.) |
| NF C23-559-1993 |
油漆用不易燃材料靜電手持噴涂設備規范 |
(Specification for electrostatic hand-held spraying equipment for non-flammable material for painting and finishing.) |
| NF C23-564-2002 |
氧氣檢測和測量用電氣裝置.性能要求和試驗方法 |
(Electrical apparatus for the detection and measurement of oxygen - Performance requirements and test methods.) |
| NF C23-570-2000 |
電磁兼容性.可燃?xì)怏w、有毒氣體或氧氣的檢測和測量用電氣設備 |
(Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen.) |
| NF C23-571-2002 |
檢測和測量可燃?xì)怏w、有毒氣體和氧氣的電氣設備.使用軟件和/或數字技術的設備的要求和試驗 |
(Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies.) |
| NF C23-576-1998 |
易燃液體噴霧材料用自動靜電噴霧裝置 |
(AUTOMATIC ELECTROSTATIC SPRAYING INSTALLATIONS FOR FLAMMABLE LIQUID SPRAYING MATERIAL. (EUROPEAN STANDARD EN 50 176).) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com