標準號 |
中文名稱 |
英文名稱 |
| NF L22-537-1975 |
埋頭內鎖緊系留螺母.單耳雙埋孔.國際單位米制螺紋 |
(Self-locking anchor nuts, countersunk type, single lug with two holes. Sim thread (rech.).) |
| NF L22-538-1975 |
埋頭內鎖緊系留螺母.單耳雙埋孔.國際單位米制螺紋 |
(Self-locking anchor nuts, countersunk type, single lug with two countersunk rivet holes. Sim thread (rech.).) |
| NF L22-540-1954 |
內鎖緊系留螺母帶 |
(GANG CHANNEL SELF-LOCKING NUTS,STRAIGHT. (RECH.).) |
| NF L22-541-2001 |
航空螺栓和螺母.鋼制、鍍鎘、MoS2潤滑的、ISO M或ISO MJ螺紋自鎖緊六角頭螺母.等級:1100MPa(室溫)/235℃或 |
() |
| NF L22-542-1966 |
航空用螺拴螺母.內鎖緊六角螺母.最高溫度：１２０℃ |
(AIRCRAFT FASTENERS. SELF-LOCKING HEXAGON NUTS. MAXIMUM TEMPERATURE : 120 DEGREES C.) |
| NF L22-543-1975 |
內鎖緊系留螺母.雙耳.國際單位米制螺紋 |
(Self-locking anchor nuts, two lugs. Sim thread (rech.).) |
| NF L22-544-1975 |
內鎖緊系留螺母.雙耳.多埋孔.國際單位米制螺紋 |
(Self-locking anchor nuts, two lugs with countersunk rivet holes. Sim thread (rech.).) |
| NF L22-545-1975 |
內鎖緊系留螺母.單耳單孔.國際單位米制螺紋 |
(Self-locking anchor nuts, single lug with one hole. Sim thread (rech.).) |
| NF L22-546-1975 |
內鎖緊系留螺母.單耳單埋孔.國際單位米制螺紋 |
(Self-locking anchor nuts, single lug with countersunk rivet hole. Sim thread (rech.).) |
| NF L22-547-1975 |
內鎖緊系留螺母.單耳雙孔.國際單位米制螺紋 |
(Self-locking anchor nuts, single lug with two holes. Sim thread (rech.).) |
| NF L22-548-1975 |
內鎖緊系留螺母.單耳雙埋孔.國際單位米制螺紋 |
(Self-locking anchor nuts, single lug with two countersunk rivet holes. Sim thread (rech.).) |
| NF L22-551-1985 |
雙耳內鎖緊系留螺母.分類MPa１２３５℃和４２５℃.ISO螺紋 |
(Self-locking anchor nuts, two lugs classification 900 MPa/235 degrees C and 425 degrees C. ISO thread.) |
| NF L22-552-1985 |
單耳雙孔內鎖緊系留螺母.分類９００MPa１２３５℃和１２５℃.ISO螺紋 |
(Self-locking anchor nuts, single lug with two holes. Classification 900 MPa/235 degrees C and 425 degrees C. ISO thread.) |
| NF L22-553-1985 |
９０度角內鎖緊系留螺母.分類900 MPa / 235℃425℃ .ISO螺紋 |
(Self-locking anchor nuts, 90 degrees corner classification 900 MPa/235 degrees C and 425 degrees C. ISO thread.) |
| NF L22-555-1985 |
雙耳內鎖緊系留扁螺母.分類900 MPa / 235℃ 和425℃ .ISO螺紋 |
(Self-locking anchor nuts, miniature series, two lugs. Classification 900 MPa/235 degrees C and 425 degrees C. ISO thread.) |
| NF L22-556-1985 |
單耳內鎖緊系留扁螺母.分類900 MPa / 235℃ 和425℃ .ISO螺紋 |
(Self-locking anchor nuts, miniature series, single lug. Classification 900 MPa/235 degrees C and 425 degrees C. ISO thread.) |
| NF L22-558-1966 |
航空用螺拴螺母.內鎖緊系留螺母.埋頭型，雙耳.最高溫度：２６０℃--４２５℃ |
(AIRCRAFT FASTENERS. SELF-LOCKING ANCHOR NUTS,COUNTERSUNK TYPE WITH TWO LUGS. MAXIMUM TEMPERATURE : 260 DEGREES C - 425 DEGREES C.) |
| NF L22-559-1966 |
航空用螺拴螺母.內鎖緊系留螺母.埋頭型、單耳雙孔.最高溫度:２６０℃-４２５℃ |
(AIRCRAFT FASTENERS. SELF-LOCKING ANCHOR NUTS,COUNTERSUNK TYPE,SINGLE LUG WITH TWO HOLES. MAXIMUM TEMPERATURE : 260 DEGREES C - 425 DEGREES C.) |
| NF L22-560-1966 |
航空用ISO螺紋螺拴螺母.內鎖緊系留螺毋.９０度角埋頭型.最高溫度：２６０℃-２５℃ |
(AIRCRAFT FASTENERS. SELF-LOCKING ANCHOR NUTS,COUNTERSUNK TYPE,90 DEGREES ANGLE. MAXIMUM TEMPERATURE : 260 DEGREES C - 425 DEGREES C.) |
| NF L22-561-1985 |
雙耳浮動型內鎖緊系留螺母.分類900 MPa /235℃和425℃ .ISO螺紋 |
(Self-locking anchor nuts, floating, two lugs classification 900 MPa/235 degrees C and 425 degrees C. ISO thread.) |
| NF L22-562-1985 |
單耳雙孔浮動型自鎖緊系留螺母.分類900 MPa / 235℃忖和425℃ .ISO螺紋 |
(Self-locking anchor nuts, floating, single lug with two holes. Classification 900 MPa/235 degrees C and 425 degrees C. ISO thread.) |
| NF L22-564-1985 |
內鎖緊系留母帶.分類900 MPa/120℃和235℃ |
(Gang channel self-locking nuts classification 900 MPa/120 degrees C and 235 degrees C. ISO thread.) |
| NF L22-565-1979 |
內鎖緊系留螺母帶.深槽最高使用溫度１２０℃.ISO螺紋 |
(GANG CHANNEL SELF-LOCKING NUTS,STRAIGHT,DEEP COUNTERBORE. MAXIMUM TEMPERATURE : 120 DEGREES C. ISO THREAD.) |
| NF L22-566-1979 |
自鎖緊系留螺母帶.深槽.最高使用溫度２３５℃.ISO螺紋 |
(GANG CHANNEL SELF-LOCKING NUTS,STRAIGHT,DEEP COUNTERBORE. MAXIMUM TEMPERATURE : 235 DEGREES C. ISO THREAD.) |
| NF L22-567-2001 |
航空螺栓和螺母.鋼制、鍍鎘、MoS2潤滑的、ISO M或ISO MJ螺紋、帶擴孔的雙耳自鎖緊固定螺母.等級:1100MPa(室 |
(Aircraft bolts and nuts - Nuts, anchor, self-locking, two lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambiant temperature) |
| NF L22-568-2000 |
航空用螺栓和螺母.單耳埋頭自鎖地腳螺母.ISO M或ISO MJ鍍鎘鋼螺紋.MoS2潤滑.分類:1100MPa(室溫)/235℃ |
(Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperat) |
| NF L22-569-2000 |
航空用螺栓和螺母.90度角埋頭自鎖地腳螺母.ISO M或ISO MJ鍍鎘鋼螺紋.MoS2潤滑.分類:1100MPa(室溫)/235℃ |
(Aircraft bolts and nuts - Nuts, anchor, self-locking, 90 o corner, with counterbore, ISO M ou ISO MJ threads, in steel, cadmium plates, MoS2 lubricated - Classification : 1 100 MPa (at ambient tempeer) |
| NF L22-570-2000 |
航空用螺栓和螺母.60度角埋頭自鎖地腳螺母.ISO M或ISO MJ鍍鎘鋼螺紋.MoS2潤滑.分類:1100MPa(室溫)/235℃ |
(Aircraft bolts and nuts - Nuts, anchor, self-locking, 60 o corner, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient tempera) |
| NF L22-571-2000 |
航空用螺栓和螺母.雙耳埋頭自鎖地腳螺母.對比系列.ISO M或ISO MJ鍍鎘鋼螺紋.MoS2潤滑.分類:1100MPa(室溫)/2 |
(Aircraft bolts and nuts - Nuts, anchjor, self-locking, two lug, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plates, MoS2 lubricated - Classification : 1 100 MPa (at am) |
| NF L22-572-2000 |
航空用螺栓和螺母.單耳埋頭自鎖地腳螺母.對比系列.ISO M或ISO MJ鍍鎘鋼螺紋.MoS2潤滑.分類:1100MPa(室溫)/2 |
(Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at) |
| NF L22-573-2000 |
航空用螺栓和螺母.90度角埋頭自鎖地腳螺母.對比系列.ISO M或ISO MJ鍍鎘鋼螺紋.MoS2潤滑.分類:1100MPa(室溫) |
(Aircraft bolts and nuts - Nuts, anchor, self-locking, 90 o corner, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at) |
| NF L22-574-2000 |
航空用螺栓和螺母.銳角埋頭自鎖地腳螺母.對比系列.ISO M或ISO MJ鍍鎘鋼螺紋.MoS2潤滑.分類:1100MPa(室溫)/2 |
(Aircraft bolts and nuts - Nuts, anchor, self-locking, closed corner, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa () |
| NF L22-575-2000 |
航空用螺栓和螺母.雙耳浮動埋頭自鎖地腳螺母.ISO M或ISO MJ鍍鎘鋼螺紋.MoS2潤滑.分類:1100MPa(室溫)/235℃ |
(Aircraft bolts and nuts - Nuts, anchor, self-locking, floating, two lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient t) |
| NF L22-576-2000 |
航空用螺栓和螺母.單耳浮動埋頭自鎖地腳螺母.ISO M或ISO MJ鍍鎘鋼螺紋.MoS2潤滑.分類:1100MPa(室溫)/235℃ |
(Aircraft bolts and nuts - Nuts, anchor, self-locking, floating, single lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambien) |
| NF L22-577-2000 |
航空用螺栓和螺母.單耳浮動埋頭自鎖地腳螺母.對比系列.ISO M或ISO MJ鍍鎘鋼螺紋.MoS2潤滑.分類:1100MPa(室 |
(Aircraft bolts and nuts - Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 M) |
| NF L22-587-2000 |
航空用螺栓和螺母.雙耳埋頭自鎖地腳螺母.ISO M或ISO MJ鍍銀耐腐蝕鋼螺紋.MoS2潤滑.分類:1100MPa(室溫)/235 |
(Aircraft bolts and nuts - Nuts, anchor, self-locking, two lug, with counterbore, ISO M ou ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperatu) |
| NF L22-588-2000 |
航空用螺栓和螺母.鍍銀不銹鋼制深槽單耳內鎖緊系留螺母.ISO M或ISO MJ螺紋.分類:1100 MPa/425度(室溫下) |
(Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temper) |
| NF L22-589-2000 |
航空用螺栓和螺母.90度角埋頭自鎖地腳螺母.ISO M或ISO MJ鍍銀耐腐蝕鋼螺紋.MoS2潤滑.分類:1100MPa(室溫)/23 |
(Aircraft bolts and nuts - Nuts, anchor, self-locking, 90 o corner, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient tempe) |
| NF L22-590-2000 |
航空用螺栓和螺母.60度角埋頭自鎖地腳螺母.ISO M或ISO MJ鍍銀耐腐蝕鋼螺紋.MoS2潤滑.分類:1100MPa(室溫)/42 |
(Aircraft bolts and nuts - Nuts, anchor, self-locking, 60 o corner, with counterbore, ISO M ou ISO MJ threads,in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temper) |
| NF L22-591-2000 |
航空用螺栓和螺母.雙耳埋頭自鎖地腳螺母.對比系列.ISO M或ISO MJ鍍銀耐腐蝕鋼螺紋.MoS2潤滑.分類:1100MPa( |
(Aircraft bolts and nuts - Nuts, anchor, self-locking, two lug, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosino resisting steel, silver plated - Classification : 1 100 MPa (at a) |
| NF L22-592-2000 |
航空用螺栓和螺母.單耳埋頭自鎖地腳螺母.對比系列.ISO M或ISO MJ鍍銀耐腐蝕鋼螺紋.MoS2潤滑.分類:1100MPa( |
(Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (a) |
| NF L22-593-2000 |
航空用螺栓和螺母.90度角埋頭自鎖地腳螺母.對比系列.ISO M或ISO MJ鍍銀耐腐蝕鋼螺紋.MoS2潤滑.分類:1100MPa |
(Aircraft bolts and nuts - Nuts, anchor, self-locking, 90 o corner, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa () |
| NF L22-594-2000 |
航空用螺栓和螺母.銳角埋頭自鎖地腳螺母.對比系列.ISO M或ISO MJ鍍銀耐腐蝕鋼螺紋.MoS2潤滑.分類:1100MPa( |
(Aircraft bolts and nuts - Nuts, anchor, self-locking, closed corner, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa) |
| NF L22-595-2000 |
航空用螺栓和螺母.雙耳扁埋頭自鎖地腳螺母.對比系列.ISO M或ISO MJ鍍銀耐腐蝕鋼螺紋.MoS2潤滑.分類:1100MPa |
(Aircraft bolts and nuts - Nuts, anchor, self-locking, flatting, two lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient) |
| NF L22-596-2000 |
航空用螺栓和螺母.單耳浮動埋頭自鎖地腳螺母.ISO M或ISO MJ鍍銀耐腐蝕鋼螺紋.MoS2潤滑.分類:1100MPa(室溫)/ |
(Aircraft bols and nuts - Nuts, anchor, self-locking, floating, singl lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambien) |
| NF L22-711-1975 |
帶銷孔的國際單位米制螺紋實心軸 |
(Solid pins, sim thread, with split pin hole (rech.).) |
| NF L22-712-1975 |
帶銷孔的國際單位米制螺紋輕型軸 |
(Hollow pins, sim thread, with split pin hole (rech.).) |
| NF L22-713-1975 |
無銷孔國際單位米制螺紋實心軸 |
(Solid pins, sim thread, without split pin hole (rech.).) |
| NF L22-714-1975 |
無銷孔國際單位米制螺紋輕型軸 |
(Hollow pins, sim thread, without split pin hole (rech.).) |
| NF L22-718-1989 |
航天系列.帶頭和過盈公差的光軸 |
(Aerospace series. Pins, shear, headed, close tolerance.) |
| NF L22-719-1975 |
光軸.尺寸 |
(Plain shackle pins. Dimensions.) |
| NF L22-720-1954 |
光軸 |
(PLAIN SHACKLE PINS. (RECH.).) |
| NF L22-721-1966 |
飛行器緊固件.帶開口銷孔的實心螺紋銷.ISO螺紋.(RECH.) |
(AIRCRAFT FASTENERS. SOLID PINS,THREADED,WITH SPLIT PIN HOLE. (ISO THREAD). (RECH.).) |
| NF L22-722-1966 |
飛行器緊固件.帶開口銷孔的空心螺紋銷.ISO螺紋.(RECH.) |
(AIRCRAFT FASTENERS. HOLLOW PINS,THREADED,WITH SPLIT PIN HOLE. (ISO THREAD). (RECH.).) |
| NF L22-723-1966 |
飛行器緊固件.無開口銷孔的實心螺紋銷.ISO螺紋.(RECH.) |
(AIRCRAFT FASTENERS. SOLID PINS,THREADED,WITHOUT SPLIT PIN HOLE. (ISO THREAD). (RECH.).) |
| NF L22-731-1974 |
帶銷孔的實心ISO螺紋軸 |
(Solid pins, ISO thread, with split pin hole.) |
| NF L22-731M1-1974 |
有銷孔的ISO 螺紋實心軸 |
(ISO THREAD SOLID SHAFT WITH PIN HOLE.) |
| NF L22-732-1979 |
帶銷孔的輕型ISO螺紋軸 |
(HOLLOW PINS,ISO THREAD,WITH SPLIT PIN HOLE.) |
| NF L22-733-1974 |
無銷孔的實心ISO螺紋軸 |
(Solid pins, ISO thread, without split pin hole.) |
| NF L22-733M1-1974 |
沒有銷孔的 ISO 螺紋實心軸 |
(ISO THREAD SOLID SHAFT WITHOUT PIN HOLE.) |
| NF L22-740-1992 |
航空航天系列.合金鋼制帶頭的銷釘,緊公差桿.技術規范 |
(Aerospace series. Pins, headed, close tolerance shank, in alloy steel. Technical specification.) |
| NF L22-750-1954 |
潤滑軸 |
(LUBRICATING PINS. (RECH.).) |
| NF L23-112-1981 |
航空用埋頭窄平墊圈 |
(Countersunk narrow plain washers.) |
| NF L23-113-1975 |
厚平墊圈.老式(英寸) |
(Thick plain washers. Old type (rech.).) |
| NF L23-114-1975 |
漸減式平墊圈.老式(英寸) |
(Reduced plain washers. Old type (rech.).) |
| NF L23-115-1975 |
漸減式厚平墊圈.老式(英寸) |
(Reduced and thick plain washers. Old type (rech.).) |
| NF L23-118-1969 |
中等厚度平墊圈 |
(PLAIN WASHERS,HI-THICK.) |
| NF L23-119-1969 |
厚平墊圈 |
(THICK PLAIN WASHERS.) |
| NF L23-120-1954 |
有凹孔的墊圈(英寸) |
(WASHERS WITH COUNTERBORE. (RECH.).) |
| NF L23-134-1969 |
平墊圈,外徑漸減 |
(PLAIN WASHERS,REDUCED OUTSIDE DIAMETER.) |
| NF L23-142-1966 |
航空飛行器緊固件.斜面厚墊圈 |
(AIRCRAFT FASTENERS. THICK CHAMFERED WASHERS.) |
| NF L23-161-1996 |
航空系列.陽極氧化或鉻酸鈍化的鋁合金平墊圈 |
(Aerospace series. Washers, flat, in aluminium alloy, anodized or chromated.) |
| NF L23-162-2000 |
航空和航天.鍍鎘平鋼墊圈 |
(Aerospace series - Washers, flat, in steel, cadmium plated.) |
| NF L23-163-1989 |
航空系列.鋼制耐熱平墊圈(EN2139) |
(AEROSPACE SERIES. WASHERS,FLAT,HEAT RESISTING STEEL. (EUROPEAN STANDARD EN 2139).) |
| NF L23-164-1995 |
航空系列.鍍鎘合金鋼用凹形墊片 |
(AEROSPACE SERIES. WASHERS, CONCAVE, IN ALLOY STEEL, CADMIUM PLATED. (EUROPEAN STANDARD EN 2648).) |
| NF L23-165-1996 |
航空系列.鋁合金制陽極化或鉻酸鈍化的大外徑平墊圈 |
(AEROSPACE SERIES. WASHERS, FLAT, LARGE DIAMETER, IN ALUMINIUM ALLOY, ANODIZED OR CHROMATED. (EUROPEAN STANDARD EN 2912).) |
| NF L23-166-2000 |
航空和航天.鋼制鍍鎘的大直徑平墊圈 |
(Aerospace series - Washers, flat, large diameter, in steel, cadmiumplated.) |
| NF L23-167-1996 |
航空系列.耐高溫鋼制鈍化的大外徑平墊圈 |
(AEROSPACE SERIES. WASHERS, FLAT, LARGE DIAMETER, IN HEAT RESISTING STEEL, PASSIVATED. (EUROPEAN STANDARD EN 2914).) |
| NF L23-168-1996 |
航空系列.耐高溫鋼制鈍化平墊圈 |
(AEROSPACE SERIES. WASHERS, FLAT, IN HEAT RESISTING STEEL, PASSIVATED. (EUROPEAN STANDARD EN 2998).) |
| NF L23-201-1975 |
軸向安裝止動環.外裝型 |
(Retaining rings for shafts, external type.) |
| NF L23-201/A1-1979 |
桿用止推環 |
(RETAINING RING FOR SHAFTS.) |
| NF L23-2011-1979 |
軸擋圈.內裝型 |
(RETAINING RING FOR SHAFTS.) |
| NF L23-202-1975 |
軸向定裝止動環.內裝型 |
(Retaining rings for shafts, internal type.) |
| NF L23-202/A1-1979 |
鏜孔用止推環 |
(RETAINING RING FOR BORES.) |
| NF L23-2021-1979 |
軸孔擋圈 |
(RETAINING RING FOR BORES.) |
| NF L23-203-1975 |
徑向安裝止動環 |
(Retaining rings for bearings.) |
| NF L23-211-1979 |
軸向安裝止動環.技術規范 |
(RETAINING RINGS FOR SHAFTS. TECHNICAL SPECIFICATION.) |
| NF L23-213-1980 |
軸向安裝止動環.技術規范 |
(RETAINING RINGS FOR BEARINGS. TECHNICAL SPECIFICATION.) |
| NF L23-250-1996 |
航空系列.止動環.交貨技術條件 |
(AEROSPACE SERIES. RINGS, RETAINING. TECHNICAL SPECIFICATION. (EUROPEAN STANDARD EN 3380).) |
| NF L23-310-1977 |
航空飛行器緊固件.開口銷 |
(AIRCRAFT FASTENERS. SPLIT PINS.) |
| NF L23-311-1989 |
航空系列.EN 2753鋼制開口銷(EN 2367) |
(AEROSPACE SERIES. SPLIT PINS IN STEEL EN 2753. (EUROPEAN STANDARD EN 2367).) |
| NF L23-320-2000 |
航空航天.鎖緊絲 |
(Aerospace - Lockwire.) |
| NF L23-321-2000 |
航空航天.卡簧銅絲 |
(Aerospace - Snapwire, in copper.) |
| NF L23-340-1971 |
止動銷 |
(LOCK PINS.) |
| NF L23-350-1966 |
飛行器緊固件.鋼板制帶耳的止動墊圈.平型 |
(AIRCRAFT FASTENERS. TAB WASHERS MADE OF STEEL PLATE,FLAT TYPE.) |
| NF L23-351-1966 |
飛行器緊固件.鋼板制外部帶耳的止動墊圈 |
(AIRCRAFT FASTENERS. EXTERNAL TAB WASHERS MADE OF STEEL PLATE.) |
| NF L23-352-1974 |
航空用螺拴螺母.翼板銷緊墊圈 |
(Tab washers with long tab.) |
| NF L23-353-1997 |
航空航天系列.鈍化耐熱鋼銷緊墊圈(歐洲標準EN 2948) |
(Aerospace series. Washers, tab, in heat resisting steel, passivated.) |
| NF L23-354-1997 |
航空航天系列.鈍化耐腐蝕鋼線鎖緊墊圈(歐洲標準EN 2949) |
(Aerospace series. Washers, wire locking, in corrosion resisting steel, passivated.) |
| NF L24-008-1996 |
航空航天系列.自鎖鋸齒柄螺母.安裝方法 |
(Aerospace series. Shank nuts, self-locking, serrated. Installation procedure.) |
| NF L24-009-1996 |
航空航天系列.自鎖緊鋸齒柄螺母用安裝孔.設計標準(歐洲標準EN 3065) |
(Aerospace series. Installation holes for self-locking, serrated shank nuts. Design standard.) |
| NF L24-020-1989 |
航空和航天.1100MPa強度級和MJ螺紋合金鋼螺釘.供應品的規范 |
(AEROSPACE. ALLOY STEEL BOLTS WITH STRENGTH CLASSIFICATION 1100 MPA AND MJ THREADS. PROCUREMENT SPECIFICATION.) |
| NF L24-025-1989 |
航天.突出頭合金鋼螺釘.1250MPa強度的等級和MJ螺紋.供應品的規范 |
(AEROSPACE. ALLOY STEEL PROTRUDING HEAD BOLTS WITH STRENGTH CLASSIFICATION 1250 MPA AND MJ THREADS. PROCUREMENT SPECIFICATION.) |
| NF L24-030-1997 |
航空航天系列.鎳基合金NI-PH2601(鉻鎳鐵合金718)制耐熱MJ螺紋螺栓.等級:1275MPA(室溫)/650℃.技術規范(歐洲 |
(AEROSPACE SERIES. BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718). CLASSIFICATION : 1275 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. TECHNICAL SPECIFICATION. (EUROPEAN STANDARD EN 2583).) |
| NF L24-101-1994 |
航空航天系列.鈍化耐熱和抗腐蝕短螺紋緊公差標準手柄標準六角螺栓.分類:1100MPA(環境溫度)/425度 |
(AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN HEAT AND CORROSION RESISTING STEEL, PASSIVATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) /425 DEGREES C. (EUROPEAN STANDARD EN 3052).) |
| NF L24-102-1997 |
航空和航天系列.凸臺,細六角頭,緊配合公差柄,短螺紋,陽極化,MOS2潤滑,鈦合金制螺栓.等級:1100MPA(室溫下)/3 |
(Aerospace series. Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS2 lubricated. Classification : 1100 MPa (at ambient temperature) / 315 degrees celsius.) |
| NF L24-103-1995 |
航空航天系列.陽極化、MOS2潤滑的短螺紋緊公差標準手柄標準六角螺栓.分類:1100MPA(環境溫度)/315度 |
(AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2549).) |
| NF L24-104-1995 |
航空航天系列.鍍鎘合金鋼的短螺紋緊公差標準手柄標準六角螺栓.分類:1100MPA(環境溫度)/235度 |
(AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 1 100 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2859).) |
| NF L24-105-1995 |
航空航天系列.鈍化耐腐蝕鋼的短螺紋緊公差標準手柄標準六角螺栓.分類:600MPA(環境溫度)/425度 |
(AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, THREADED TO HEAD, IN CORROSION RESISTING STEEL, PASSIVATED. CLASSIFICATION : 600 MPA (AT AMBIENT TEMPERATURE) / 425 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2887).) |
| NF L24-106-1995 |
航空航天系列.鈍化耐腐蝕鋼的短螺紋粗公差標準手柄標準六角螺栓.分類:600MPA(環境溫度)/425度 |
(AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN CORROSION RESISTING STEEL, PASSIVATED. CLASSIFICATION : 600 MPA (AT AMBIENT TEMPERATURE) / 425 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2888).) |
| NF L24-107-1995 |
航空航天系列.鍍鎘合金鋼的短螺紋粗公差標準手柄標準六角螺栓.分類:900MPA(環境溫度)/235度 |
(AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2889).) |
| NF L24-108-1995 |
航空航天系列.鍍鎘合金鋼的帶螺紋頭的標準六角螺栓.分類:900MPA(環境溫度)/235度 |
(AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, THREADED TO HEAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3112).) |
| NF L24-109-1997 |
航空航天系列.陽極化MOS2潤滑鈦合金制標準六角頭、螺紋頭螺絲.等級:1100MPA(室溫)/315℃(歐洲標準EN 3308) |
(AEROSPACE SERIES. SCREWS, NORMAL HEXAGONAL HEAD, THREADED TO HEAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3308).) |
| NF L24-112-1994 |
航空和航天系列.耐熱鋼FE-PA92HT(A286)用螺旋,六角頭及螺紋頭.分類.900MPa(室溫)/650℃ |
(AEROSPACE SERIES. SCREWS, HEXAGON HEAD, THREADED TO HEAD, IN HEAT RESISTING STEEL FE-PA92HT (A286). CLASSIFICATION : 900 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2937).) |
| NF L24-113-1996 |
航空航天系列.鍍銀FE-PA92HT(A286)耐高溫鋼制螺紋到底部的六角螺釘.分類:900MPa(室溫下)/650℃ |
(AEROSPACE SERIES. SCREWS, HEXAGON HEAD, THREADED TO HEAD, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED. CLASSIFICATION : 900 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2938).) |
| NF L24-114-1994 |
航空和航天系列.耐熱鋼FE-PA92HT(A286)用100°埋頭螺釘,偏置式十字形凹口及螺紋頭.分類.900MPa(室溫)/650℃ |
(AEROSPACE SERIES. SCREWS, 100 DEGREES COUNTERSUNK HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN HEAT RESISTING STEEL FE-PA92HT (A286). CLASSIFICATION : 900 MPA (at AMBIENT TEMPERATURE) / 650 CELSIUSGRADE. (NORM EUROPEAN STANDARD EN 2939).) |
| NF L24-115-1996 |
航空航天系列.鍍銀耐熱鋼FE-PA92HT(A286)100°埋頭偏置式十字形凹口螺紋到底部的螺釘.分類.900MPa(室溫)/65 |
(AEROSPACE SERIES. SCREWS, 100 DEGREES COUNTERSUNK HEAD, OFFSET CRUCIFORM ECESS, THREADED TO HEAD, IN HEAT RESISTING TEEL E-PA92HT(A286),SILVERPLATED.CLASSIFICATION : 900 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2940).) |
| NF L24-116-1994 |
航空和航天系列.耐熱鋼FE-PA92HT(A286)用螺栓,六角頭,后角刀,長螺紋.分類.900MPa(室溫)/650℃ |
(AEROSPACE SERIES. BOLTS, HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING STEEL FE-PA92HT (A286). CLASSIFICATION : 900 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3006).) |
| NF L24-117-1996 |
航空和航天.耐高溫鋼FE-PA92HT(A286)制鍍銀長螺紋細桿六角螺絲釘.等級900MPa(室溫下)/650℃ |
(AEROSPACE SERIES. BOLTS, HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED. CLASSIFICATION : 900 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3007).) |
| NF L24-118-1998 |
航空航天系列.螺栓,六角頭,脫開桿,長螺紋耐熱鑷合金NI-P100HT(INCONEL 718).分類:1275MPA(在環境溫度下)/65 |
(AEROSPACE SERIES. BOLTS, HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718). CLASSIFICATION : 1275 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3008).) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com