標準號 |
中文名稱 |
英文名稱 |
| NF C93-537-3-17-2002 |
通信電纜.試驗方法規范.第3-17部分:機械試驗方法.介質材料和護套電纜粘性 |
(Communication cables - Specifications for test methods - Part 3-17 : mechanical test methods - Adhesion of dielectric and sheath.) |
| NF C93-537-3-2-2001 |
通信電纜.試驗方法規范.第3-2部分:機械試驗方法.抗張強度和導線彈性 |
(Communication cables - Specifications for test methods - Part 3-2 : mechanical test methods - Tensile strength and elongation for conductor.) |
| NF C93-537-3-4-2001 |
通信電纜.試驗方法規范.第3-4部分:機械試驗方法.絕緣體和護套的抗張強度、彈性和伸縮性 |
(Communication cables - Specifications for test methods - Part 3-4 : mechanical test methods - Tensile strength, elongation and shrinkage of insulation and sheath.) |
| NF C93-537-3-5-2001 |
通信電纜.試驗方法規范.第3-5部分:機械試驗方法.電纜的抗擠壓性 |
(Communication cables - Specifications for test methods - Part 3-5 : mechanical test methods - Crush resistance of the cable.) |
| NF C93-537-3-6-2001 |
通信電纜.試驗方法規范.第3-6部分:機械試驗方法.電纜的抗沖擊性 |
(Communication cables - Specifications for test methods - Part 3-6 : mechanical test methods - Impact resistance of the cable.) |
| NF C93-537-3-7-2001 |
通信電纜.試驗方法規范.第3-7部分:機械試驗方法.電纜護套的耐磨性 |
(Communication cables - Specifications for test methods - Part 3-7 : mechanical test methods - Abrasion resistance of the cable sheath.) |
| NF C93-537-3-8-2001 |
通信電纜.試驗方法規范.第3-8部分:機械試驗方法.電纜護套標記的耐磨性 |
(Communication cables - Specifications for test methods - Part 3-8 : mechanical test methods - Abrasion resistance of cable sheath markings.) |
| NF C93-537-3-9-2001 |
通信電纜.試驗方法規范.第3-9部分:機械試驗方法.彎曲試驗 |
(Communication cables - Specifications for test methods - Part 3-9 : mechanical test methods - Bending tests.) |
| NF C93-537-4-1-2002 |
通信電纜.試驗方法規范.第4-1部分:環境試驗方法.一般要求 |
(Communication cables - Specifications for test methods - Part 4-1 : environmental test methods - General requirements.) |
| NF C93-537-4-11-2002 |
通信電纜.試驗方法規范.第4-11部分:環境試驗方法.水平擴散著火試驗方法 |
(Communication cables - Specifications for test methods - Part 4-11 : environmental test methods - A horizontal integrated fire test method.) |
| NF C93-537-4-14-2003 |
通信電纜.試驗方法規范.第4-14部分:環境試驗方法.閃電 |
(Communication cables - Specifications for test methods - Part 4-14 : environmental test methods - Lightning.) |
| NF C93-537-4-2-2002 |
通信電纜.試驗方法規范.第4-2部分:環境試驗方法.滲水性 |
(Communication cables - Specifications for test methods - Part 4-2 : environmental test methods - Water penetration.) |
| NF C93-537-4-6-2002 |
通信電纜.試驗方法規范.第4-6部分:環境試驗方法.溫度循環試驗 |
(Communiaction cables - Specifications for test methods - Part 4-6 : environmental test methods - Temperature cycling.) |
| NF C93-537-4-9-2002 |
通信電纜.試驗方法規范.第4-9部分:環境試驗方法.氣壓電阻 |
(Communication cables - Specifications for test methods - Part 4-9 : environmental test methods - Pneumatic resistance.) |
| NF C93-540-1-1-2002 |
通信電纜.第1-1部分:總則 |
(Communication cables - Part 1-1 : general.) |
| NF C93-540-2-20-2002 |
通信電纜.第2-20部分:通用設計規則及結構.總則 |
(Communication cables - Part 2-20 : common design rules and construction - General.) |
| NF C93-540-2-21-2002 |
通信電纜.第2-21部分:通用設計規則及結構.PVC絕緣化合物 |
(Communication cables - Part 2-21 : common design rules and construction - PVC insulation compounds.) |
| NF C93-540-2-22-2002 |
通信電纜.第2-22部分:通用設計規則及結構.PVC鎧裝化合物 |
(Communication cables - Part 2-22 : common design rules and construction - PVC sheathing compounds.) |
| NF C93-540-2-23-2002 |
通信電纜.第2-23部分:通用設計規則及結構.PE絕緣 |
(Communication cables - Part 2-23 : common design rules and construction - PE insulation.) |
| NF C93-540-2-24-2002 |
通信電纜.第2-24部分:一般設計規則和制造.聚乙烯鎧裝 |
(Communication cables - Part 2-24 : common design rules and construction - PE sheathing.) |
| NF C93-540-2-25-2002 |
通信電纜.第2-25部分:一般設計規則和制造.聚丙烯絕緣化合物 |
(Communication cables - Part 2-25 : common design rules and construction - Polypropylene insulation compounds.) |
| NF C93-540-2-26-2002 |
通信電纜.第2-26部分:一般設計規則和制造.無鹵素的阻燃絕緣化合物 |
(Communication cables - Part 2-26 : common design rules and construction - Halogen free flame retardant insulation compounds.) |
| NF C93-540-2-27-2002 |
通信電纜.第2-27部分:一般設計規則和制造.無鹵素的阻燃熱塑性鎧裝化合物 |
(Communication cables - Part 2-27 : common design rules and construction - Halogen free flame retardant thermoplastic sheathing compounds.) |
| NF C93-540-2-28-2002 |
通信電纜.第2-28部分:一般設計規則和制造.填充電纜用填充化合物 |
(Communication cables - Part 2-28 : common design rules and construction - Filling compounds for filled cables.) |
| NF C93-540-2-29-2002 |
通信電纜.第2-29部分:一般設計規則和制造.交聯聚乙烯絕緣化合物 |
(Communication cables - Part 2-29 : common design rules and construction - Cross-linked PE insulation compounds.) |
| NF C93-540-2-30-2002 |
通信電纜.第2-30部分:一般設計規則和制造.四氟乙烯和六氟乙烯共聚物(FEP)絕緣和鎧裝 |
(Communication cables - Part 2-30 : common design rules and construction - Poly(tetrafluoroethylene-Hexafluoropropylene) (FEP) insulation and sheathing.) |
| NF C93-540-4-1-2002 |
通信電纜.第4-1部分:電纜使用的一般考慮.環境條件和安全方面 |
(Communication cables - Part 4-1 : general considerations for the use of cables - Environmental conditions and safety aspects.) |
| NF C93-542-1-2001 |
模擬和數字通信和控制用多件金屬電纜.第1部分:總規范 |
(Multi-element metallic cables used in analogue and digital communication and control - Part 1 : generic specification.) |
| NF C93-542-2-1-2001 |
模擬和數字通信和控制用多件金屬電纜.第2-1部分:特征值最高達100 MHz的屏蔽電纜的分規范.水平電纜和建筑 |
(Multi-element metallic cables used in analogue and digital communication and control - Part 2-1 : sectionnal specification for screened cables characterized up to 100 MHz - Horizontal and building bac) |
| NF C93-542-2-2-2001 |
模擬和數字通信和控制用多件金屬電纜.第2-2部分:特征值最高達100 MHz的屏蔽電纜的分規范.工作區域電纜和 |
(Multi-element metallic cables used in analogue and digital communication and control - Part 2-2 : sectionnal specification for screened cables characterized up to 100 MHz - Work area and patch cord ca) |
| NF C93-542-3-1-2001 |
模擬和數字通信和控制用多件金屬電纜.第3-1部分:特征值最高達100 MHz的非屏蔽電纜的分規范.水平電纜和建 |
(Multi-element metallic cables used in analogue and digital communication and control - Part 3-1 : sectionnal specification for unscreened cables characterized up to 100 MHz - Horizontal and building b) |
| NF C93-542-3-2-2001 |
模擬和數字通信和控制用多件金屬電纜.第3-2部分:特征值最高達100 MHz的非屏蔽電纜的分規范.工作區域電纜 |
(Multi-element metallic cables used in analogue and digital communication and control - Part 3-2 : sectional specification for unscreened cables characterized up to 100 MHz - Work area and patch cord c) |
| NF C93-542-4-1-2001 |
模擬和數字通信和控制用多件金屬電纜.第4-1部分:特征值最高達600 MHz的屏蔽電纜的分規范.水平和建筑主電 |
(Multi-element metallic cables used in analogue and digital communication and control - Part 4-1 : sectionnal specification for screened cables characterized up to 600 MHz - Horizontal and building bac) |
| NF C93-542-4-2-2001 |
模擬和數字通信和控制用多件金屬電纜.第4-2部分:特征值最高達600 MHz的屏蔽電纜的分規范.工作區域電纜和 |
(Multi-element metallic cables used in analogue and digital communication and control - Part 4-2 : sectionnal specification for screened cables characterized up to 600 MHz - Work area and patch cord ca) |
| NF C93-547-1-2000 |
液晶和固態顯示器件.第1部分:總規范 |
(Liquid crystal and solid-state display devices - Part 1 : generic specification.) |
| NF C93-547-1/A1-2003 |
液晶和固態顯示裝置.第1部分:總規范 |
(Liquid crystal and solid-state display device - Part 1 : generic specification.) |
| NF C93-547-2-1-2001 |
液晶和固態顯示裝置.第2-1部分:無源矩陣單色模塊.空白詳細規范 |
(Liquid crystal and solid-state display devices - Part 2-1 : passive matrix monochrome LCD modules - Blank detail specification.) |
| NF C93-547-2-1999 |
液晶和固態顯示設備.第2部分:液晶顯示模塊.分規范 |
(Liquid crystal and solid-state display devices. Part 2 : liquid crystal display modules. Sectional specification.) |
| NF C93-547-3-1-2000 |
液晶和固態顯示器件.第3-1部分:液晶顯示屏(LCD).空白詳細規范 |
(Liquid crystal and solid-state display devices - Part 3-1 : liquid crystal display (LCD) cells - Blank detail specification.) |
| NF C93-547-4-1999 |
液晶和固態顯示器件.第4部分:液晶顯示模塊和屏.基本額定值和特性 |
(Liquid crystal and solid-state display devices. Part 4 : liquid crystal display modules and cells. Essential ratings and characteristics.) |
| NF C93-547-5-1999 |
液晶和固態顯示器.第5部分:環境老化和機械性能試驗方法 |
(Liquid crystal and solid-state display devices. Part 5 : environmental endurance and mechanical test methods.) |
| NF C93-548-2-2-2003 |
等離子體顯示板.第2-2部分:光電測量方法 |
(Plasma display Panels - Part 2-2 : measuring methods - Optoelectrical.) |
| NF C93-550-1982 |
電子件.金屬絲編織高頻同軸電纜.一般規定 |
(Electronic components. RF coaxial cables, with metallic braid. General requirements.) |
| NF C93-550/A1-1984 |
NF C 93-550-1982的補充件1 |
() |
| NF C93-5501-1984 |
C93-550-82的補充1 |
() |
| NF C93-551-1977 |
電子件.無線電頻率用半硬同軸電纜.一般規定 |
(ELECTRONIC COMPONENTS. SEMI RIGID COAXIAL CABLES. GENERAL REQUIREMENTS.) |
| NF C93-557-2001 |
RF接頭、接頭電纜組件和電纜.互調程度測量 |
(RF connectors, connector cable assemblies and cables - Intermodulation level measurement.) |
| NF C93-560-1-1997 |
無線電頻率連接器.單個,多個系列、雙語種空白詳細規范 |
(Radio-frequency connectors. Part 1-1 : single, multi-series, dual-language blank detail specification.) |
| NF C93-560-2-2002 |
射頻連接器.第2部分:分規范.9.52型射頻同軸連接器 |
(Radio-frequency connectors - Part 2 : sectional specification - Radio frequency coaxial connectors of type 9,52.) |
| NF C93-560-2002 |
射頻連接器.第1部分:總規范.一般要求和測量方法 |
(Radio-frequency connectors - Part 1 : generic specification - General requirements and measuring methods.) |
| NF C93-560-24-2002 |
射頻連接器.第24部分:分規范.主要用于75歐姆電纜分配系統的螺紋連接射頻同軸連接器(F型) |
(Radio-frequency connectors - Part 24 : sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 ohms cable distribution systems (type F).) |
| NF C93-560-31-2001 |
射頻連接器.第31部分:外導體內徑為1.0mm(0.039in)的螺紋連接射頻同軸連接器.特性阻抗50歐姆(1.0型) |
(Radio-frequency connectors - Part 31 : RF coaxial connectors with inner diameter of outer conductor 1,0 mm (0,039 in) with screw coupling - Characteristic impedance 50 ohms (type 1,0).) |
| NF C93-560-32-2001 |
射頻連接器.第31部分:外導體內徑為1.85 mm (0.072 in)的螺紋連接射頻同軸連接器.特性阻抗50歐姆(1.85型) |
(Radio-frequency connectors - Part 31 : RF coaxial connectors with inner diameter of outer conductor 1,85 mm (0,072 in) with screw coupling - Characteristic impedance 50 ohms (type 1,85).) |
| NF C93-560-33-1997 |
射頻連接器.第33部分:BMA 射頻連接器系列.分規范 |
(Radio-frequency connectors. Part 33 : sectional specification for series BMA r.f. connectors.) |
| NF C93-560-36-1997 |
射頻連接器.第36部分:帶有插入式連接器的微型r射頻同軸連接件.特性阻抗50歐姆(MCX型) |
(Radio-frequency connectors. Part 36 : sectional specification for microminiature R.F. coaxial connectors with snap-on coupling. Characteristic impedance 50 ohms (type MCX).) |
| NF C93-560/A1-2002 |
射頻連接器.第1部分:總規范.一般要求和測量方法 |
(Radio-frequency connectors - Part 1 : generic specification - General requirements and measuring methods.) |
| NF C93-560/A2-2002 |
射頻連接器.第1部分:總規范.一般要求和測量方法 |
(Radio-frequency connectors - Part 1 : generic specification - General requirements and measuring methods.) |
| NF C93-561-1981 |
電子件.螺釘鎖定的小型同軸接頭.一般規定 |
(Components for electronic equipment. Miniature coaxial connectors with screw coupling. General requirements.) |
| NF C93-561/A1-1981 |
NF C 93-561-1981的補充件1 |
() |
| NF C93-561/A2-1981 |
NF C 93-561-1981的補充件2 |
() |
| NF C93-561/A3-1982 |
NF C 93-561-1981的補充件3 |
() |
| NF C93-5611-1981 |
NF C93-561-81的補充件1 |
() |
| NF C93-5612-1981 |
C93-561-81的補充2 |
() |
| NF C93-562-1981 |
電子件.彈簧栓耦接的小型同軸接頭.一般規定 |
(Components for electronic equipment. Miniature coaxial connectors with snap-on coupling. General requirements.) |
| NF C93-562/A1-1981 |
NF C 93-562-1981的補充件1 |
() |
| NF C93-562/A2-1981 |
NF C 93-562-1981的補充件2 |
() |
| NF C93-562/A3-1982 |
NF C 93-562-1981的補充件3 |
() |
| NF C93-5621-1981 |
NF C93-562-81的補充件1 |
() |
| NF C93-5622-1981 |
C93-562-81的補充2 |
() |
| NF C93-5623-1982 |
NF C93-562-81的補充件3 |
() |
| NF C93-564-1981 |
電子件.接線柱鎖定射頻用同軸接頭(KBN系列) |
(Electronic components. Miniature coaxial connectors with bayonet coupling (kbn series). General requirements.) |
| NF C93-564/A1-1981 |
NF C 93-564-1981的補充1 |
() |
| NF C93-564/A3-1983 |
NF C 93-564-1981的補充1 |
() |
| NF C93-5641-1981 |
C93-564-81的補充1 |
() |
| NF C93-5643-1983 |
NF C93-564-81的補充件3 |
() |
| NF C93-565-1996 |
無線電頻連接器. 第23部分:與3.5MM剛性精確共軸線一起使用的帶有外導體3.5MM的內徑的針式或套節式連接器 |
(Radio-frequency connectors. Part 23 : pin and socket connector for use with 3,5 mm rigid precisin coaxial lines with inner diameter of outer conductor 3,5 mm (0,1378 in).) |
| NF C93-565-21-1998 |
射頻連接器.第21部分:不同型式的外部導體內直徑9.5mm(0.374英寸)的兩種射頻連接器(SC-A和SC-B型) |
(Radio-frequency connectors. Part 21 : two types of radio-frequency connectors with inner diameter of outer conductor 9,5 mm (0,374 in) with different versions of screw coupling. Characteristic impedance 50 ohms(types SC-A and SC-B).) |
| NF C93-566-1981 |
電子件.螺釘鎖定射頻用同軸接頭(KN系列).一般規定 |
(ELECTRONIC COMPONENTS. RF COAXIAL CONNECTORS WITH SCREW COUPLING (TYPE KN). GENERAL REQUIREMENTS.) |
| NF C93-566/A1-1983 |
NF C 93-564-1981的補充件1 |
() |
| NF C93-5661-1983 |
C93-566-81的補充1 |
() |
| NF C93-567-1996 |
無線電頻連接器.第24部分:典型用于75OHM電纜配電系統的帶螺紋耦合的無線電頻共軸連接器(F型) |
(Radio-frequency connectors. Part 24 : radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (type F).) |
| NF C93-568-1985 |
通用75Ω阻抗E系列同軸連接裝置 |
(COAXIAL CONNECTION DEVICES SERIE E IMPEDANCE : 75 OHMS FOR GENERAL PURPOSE.) |
| NF C93-569-1981 |
電子件.多觸點件用同軸接點(KMX系列).一般規定 |
(ELECTRONIC COMPONENTS. CONNECTING DEVICES. COAXIAL CONTACT FOR MULTIPOLE COMPONENTS. SERIES KMX. GENERAL REQUIREMENTS.) |
| NF C93-570-1986 |
電子件.射頻同軸接頭.1·6-5·5系列.75Ω阻抗.KTB型 |
(RF COAXIAL CONNECTORS 1,6-5,6 SERIE CHARACTERISTIC IMPEDANCE 75 OHMS. TYPE KTB.) |
| NF C93-570/A1-1988 |
NF C 93-570-1986的補充件1 |
() |
| NF C93-5701-1988 |
C 93-570-86的補充1 |
() |
| NF C93-571-1986 |
電子件.射頻同軸接頭.1·0-2·3系列.KTA型 |
(RF COAXIAL CONNECTORS 1,0-2,3 SERIE TYPE KTA.) |
| NF C93-575-1968 |
空心波導管件 |
(FLEXIBLE HOLLOW WAVEGUIDES.) |
| NF C93-576-1969 |
電子件.射頻用連接件.矩形中空金屬導波管和絕緣.第1分冊.一般條件 |
(COMPONENTS FOR ELECTRONIC EQUIPMENT - CONNECTING PARTS FOR RADIOFREQUENCIES. HOLLOW METALLIC RECTANGULAR WAVEGUIDES AND ASSOCIATED FLANGES.) |
| NF C93-578-1996 |
射頻連接件.第20部分:外導線內徑為13.56mm(0,534 in)同時帶有兩條內導線的屏蔽平衡電纜用雙頭螺釘(3/4-20統 |
(Radio-frequency connectors. Part 25 : two-pole screw (3/4-20 unef) coupled connectors for use with shielded balanced cables having twin inner conductors with inner diameter of outer conductor 13,56 mm (0,534 in) (type twhn).) |
| NF C93-584-1-1999 |
射頻同軸電纜組件.第1部分:總規范.一般要求和試驗方法 |
(Radio frequency and coaxial cable assemblies - Part 1 : generic specification - General requirements and test methods.) |
| NF C93-584-2-1-1998 |
射頻和同軸電纜組件.第2-1部分:柔性同軸電纜組件的分規范 |
(Radio frequency and coaxial cable assemblies. Part 2-1 : sectional specification for flexible coaxial cable assemblies.) |
| NF C93-584-2-2-2000 |
射頻同軸電纜組件.第2-2部分:柔性同軸電纜組件空白詳細規范 |
(Radio frequency and coaxial cable assemblies - Part 2-2 : blank detail specification for flexible coaxial cable assemblies.) |
| NF C93-584-2-3-1999 |
射頻和同軸電纜組件.第2-3部分:柔性同軸電纜組件的詳細規范 |
(Radio frequency and coaxial cable assemblies. Part 2-3 : detail specification for flexible coaxial cable assemblies.) |
| NF C93-584-2-4-1998 |
射頻和同軸電纜部件.第2-4部分:廣播和電視接收機用電纜部件的詳細規范(IEC 60169-2連接器頻率范圍0-3000MHZ |
(Radio frequency and coaxial cable assemblies. Part 2-4 : detail specification for cable assemblies for radio and TV receivers (frequency range 0 to 3000 MHz, IEC 60169-2 connectors).) |
| NF C93-584-2-5-1999 |
射頻和同軸電纜組件.第2-5部分:廣播和電視接收機用電纜組件的詳細規范.IEC 60169-2連接器的頻率范圍0-1000M |
(Radio frequency and coaxial cable assemblies. Part 2-5 : detail specification for cable assemblies for radio and TV receivers. Frequency range 0 to 1000 MHz, IEC 60169-2 connectors.) |
| NF C93-584-2-6-1999 |
射頻和同軸電纜組件.第2-6部分:廣播和電視接收機用電纜組件的詳細規范.IEC 60169-24連接器的頻率范圍0-3000 |
(Radio frequency and coaxial cable assemblies. Part 2-6 : detail specification for cable assemblies for radio and TV receivers. Frequency range 0 to 3000 MHz, IEC 60169-24 connectors.) |
| NF C93-584-3-1-2000 |
射頻同軸電纜組件.第3-1部分:半柔性同軸電纜組件空白詳細規范 |
(Radio frequency and coaxial cable assemblies - Part 3-1 : blank detail specification for semi-flexible coaxial cable assemblies.) |
| NF C93-584-3-2-1999 |
射頻和同軸電纜組件.第3-2部分:GSM(0.8GHZ-1GHZ)用半柔性同軸電纜組件的詳細規范 |
(Radio frequency and coaxial cable assemblies. Part 3-2 : detail specification for semi-flexible coaxial cable assemblies for GSM use (0,8 GHz - 1 GHz).) |
| NF C93-584-3-2000 |
射頻同軸電纜組件.第4-1部分:半硬質同軸電纜組件的詳細空白規范 |
(Radio frequency and coaxial cable assemblies - Part 4-1 : blank detail specification for semi-rigid coaxial cable assemblies.) |
| NF C93-584-4-1-2000 |
射頻同軸電纜組件.第4-1部分:半硬同軸電纜組件空白詳細規范 |
(Radio frequency and coaxial cable assemblies - Part 4-1 : blank detail specification for semi-rigid coaxial cable assemblies.) |
| NF C93-584-4-2000 |
射頻同軸電纜組件.第4部分:半硬同軸電纜組件分規范 |
(Radio frequency and coaxial cable assemblies - Part 3 : selectional specification for semi-flexible coaxial cable assemblies.) |
| NF C93-585-2-2002 |
射頻電纜.規范.第2部分:聚四氟乙烯絕緣的半硬性射頻和同軸電纜.分規范 |
(Radio-frequency cables - Specifications - Part 2 : semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation - Sectional specification.) |
| NF C93-585-3-1999 |
射頻電纜.第3部分:局域網用同軸電纜分規范 |
(Radio frequency cables. Part 3 : sectional specification for coaxial cables for local area networks.) |
| NF C93-585-3-2-1998 |
無線頻率電纜.第3-2部分:水平地板線數字通信共軸電纜.185M達到10MB/S局域網固體介電共軸電纜詳細規范 |
(Radio frequency cables. Part 3-2 : coaxial cables for digital communication in horizontal floor wiring. Detail specification for coaxial cables with solid dielectric for local area network of 185 m reach and up to 10 Mb/s.) |
| NF C93-585-3-3-1998 |
射頻電纜.第3-3部分:水平地面線路數字通信用同軸電纜.185M小于等于10MB/S的區域網用有泡沫絕緣體的同軸電纜 |
(Radio frequency cables. Part 3-3 : coaxial cables for digital communication in horizontal floor wiring. Detail specification for coaxial cables with foamed dielectric for local area network of 185 m reach and up to 10 Mb/s.) |
| NF C93-587-1-2001 |
通用布線系統.根據EN 50173對平衡通信布線進行檢驗的規范.第1部分:電纜敷設 |
(Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with EN 50173 - Part 1 : installed cabling.) |
| NF C93-587-1/A1-2003 |
通用布線系統.根據EN 50173對對稱通信布線進行檢驗的規范.第1部分:電纜敷設 |
(Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with EN 50173 - Part 1 : installed cabling.) |
| NF C93-592-1998 |
波導法蘭盤.第2部分:普通矩形波導法蘭盤的有關規范 |
(Flanges for waveguides. Part 2 : relevant specifications for flanges for ordinary rectangular waveguides.) |
| NF C93-592/A1-2002 |
波導法蘭盤.第2部分:普通矩形波導法蘭盤的有關規范 |
(Flanges for waveguides - Part 2 : relevant specifications for flanges for ordinary rectangular waveguides.) |
| NF C93-593-1-2002 |
波導管測量方法.第1部分:偏振面的退耦和旋轉 |
(Methods of measurement for waveguides - Part 1 : decoupling and rotation of the plane of polarization.) |
| NF C93-593-2-2002 |
波導管測量方法.第2部分:互相調制產品的等級 |
(Methods of measurement for waveguides - Part 2 : level of intermodulation products.) |
| NF C93-593-3-1998 |
波導測量方法.第3部分:組延遲變化 |
(Methods of measurement for waveguides. Part 3 : variation of group delay.) |
| NF C93-593-4-1998 |
波導的測量方法.第4部分:波導和波導組件的衰減 |
(Methods of measurement for waveguides. Part 4 : attenuation of waveguide and waveguide assemblies.) |
| NF C93-593-6-1998 |
波導的測量方法.波導和波導組件回歸損失 |
(Methods of measurement for waveguides. Part 6 : return loss on waveguide and waveguide assemblies.) |
| NF C93-593-7-2002 |
波導管測量方法.第7部分:波導管性能測定的圖解法 |
(Methods of measurement for waveguides - Part 7 : graphical method for the determination of waveguide performance.) |
| NF C93-593-8-2002 |
波導管測量方法.第8部分:波導管功率保持能力 |
(Methods of measurement for waveguides - Part 8 : waveguide power holding capability.) |
| NF C93-593-9-2002 |
波導管測量方法.第9部分:矩形波導管接口的反射系數 |
(Methods of measurement for waveguides - Part 9 : reflection coefficient at rectangular waveguide interfaces.) |
| NF C93-594-1-2003 |
波導法蘭盤.第1部分:一般要求 |
(Flanges for waveguides - Part 1 : general requirements.) |
| NF C93-594-1/A1-2003 |
波導法蘭盤.第1部分:一般要求 |
(Flanges for waveguides - Part 1 : general requirements.) |