標準號 |
中文名稱 |
英文名稱 |
| NF E48-617-1974 |
液壓傳動用流體.難燃流體和HM及HV級礦物油.耐磨性能 |
(FLUIDS FOR HYDRAULIC POWER SYSTEMS-FIRE RESISTANT FLUIDS AND MINERAL OILS,FORMS HM AND HV - ANTI-WEAR PROPERTIES) |
| NF E48-618-1973 |
液壓傳動用流體.用難燃流體屏幕在高壓射流下可燃性的測定 |
(FLUIDS FOR HYDRAULIC POWER SYSTEMS-DETERMINATION OF IGNITABILITY OFFIRE-RESISTANT FLUIDS ATOMIZED UNDER HIGH PRESSURE WITH SCREEN) |
| NF E48-620-1973 |
液壓傳動用流體.碳?jí)m埃和難燃流體混合物中火焰蔓延性的測定 |
(FLUIDS FOR HYDRAULIC POWER SYSTEMS-DETERMINATION OF FLAME-PROPAGATION IN A MIXTURE OF FIRE-RESISTANT FLUIDS WITH COAL-DUST) |
| NF E48-640-1973 |
液壓傳動用流體.難燃流體使用須知 |
(FLUIDS FOR HYDRAULIC POWER SYSTEMS-DIRECTIONS FOR USE OF FIRE-RESISTANT FLUIDS) |
| NF E48-651-2002 |
液壓傳動.液壓液污染.用光學顯微鏡計數法測定粒狀污染物 |
(Hydraulic fluid power - Fluid contamination - Determination of particulate contamination by the counting method using an optical microscope.) |
| NF E48-652-1990 |
液壓傳動用流體.用重量法測定粉塵總污染 |
(Hydraulic fluid power. Fluids. Determination of overall particulate contamination by the gravimetric method.) |
| NF E48-653-1991 |
液體傳動.液體取樣瓶,對檢查與清潔容器方法的鑒定 |
(Hydraulic fluid power. Sampling bottles. Qualifying methods and lot inspection.) |
| NF E48-658-1990 |
液壓傳動.流體.利用光干擾自動計數法對粉末污染的測定 |
(HYDRAULIC FLUID POWER. FLUIDS. DETERMINATION OF PARTICULATE CONTAMINATION BY AUTOMATIC COUNTING USING THE LIGHT INTERRUPTION PRINCIPLE.) |
| NF E48-659-2003 |
液壓傳動.部件和件的清潔度.與污物收集、分析和數據報告相關的檢驗文件和原則 |
(Hydraulic fluid power - Cleanliness of parts and components - Inspection document and principles related to contaminant collection, analysis and data reporting.) |
| NF E48-660-1991 |
液壓傳動.流體.用光學顯微鏡和圖象分析測定固體粉塵污染 |
(HYDRAULIC FLUID SYSTEMS. FLUIDS. DETERMINATION OF SOLID PARTICULATE CONTAMINATION BY OPTICAL MICROSCOPE AND IMAGE ANALYSIS.) |
| NF E48-670-2003 |
液壓傳動.濾芯.性能特征鑒定的試驗序列 |
(Hydraulic fluid power - Filter elements - Sequence of tests for verifying performance characteristics.) |
| NF E48-675-1988 |
液壓傳動.過濾件.用流量循環變化的疲勞試驗檢驗過濾件的特性 |
(Hydraulic fluid power. Filter elements. Resistance to the fatigue due to cyclic flow variations.) |
| NF E48-677-2002 |
液力傳動.過濾器.差壓對流量特性的評定 |
(Hydraulic fluid power - Filters - Evaluation of differential pressure versus flow characteristics.) |
| NF E48-678-1995 |
液壓傳動.接收器口及壓力輸送用過濾器.性能 |
(Hydraulic fluid power. Filters for receiver venting and pressurization. Performances.) |
| NF E48-679-1990 |
液壓傳動.過濾器.絕對過濾額定值的測定 |
(HYDRAULIC FLUID POWER. FILTER ELEMENTS. DETERMINATION OF ABSOLUTE FILTRATION RATING.) |
| NF E48-685-2000 |
液壓動力.過濾件的過濾性能的評價多途徑方法 |
(Hydraulic fluid power - Multi-pass method for evaluating filtration performance of a filter element.) |
| NF E48-690-1990 |
液壓傳動.流體.礦物油過濾性的測定 |
(Hydraulic fluid power. Fluids. Measurement of filtrability of mineral oils.) |
| NF E48-691-1995 |
液壓傳動.液體.存在于水中的礦物油的可濾性測量 |
(Hydraulic fluid power. Fluids. Measurement of filtrability of minerals oils in the presence of water.) |
| NF E48-692-1997 |
液壓傳動.液體.HFC和HFD類防火液體的可濾性測量 |
(Hydraulic fluid power. Fluids. Measurement of filtrability of HFC and HFD class fire resistant fluids.) |
| NF E48-695-2003 |
液壓傳動.零部件.微粒污染測量結果的表示 |
(Hydraulic fluid power - Parts and components - Expression of particulate pollution measurement results.) |
| NF E48-701-1993 |
液壓傳動.濾油器.定義、標定壓力、標定尺寸、配件尺寸 |
(Hydraulic fluid power. Filters. Definitions, nominal pressures, nominal sizes, fitting dimensions.) |
| NF E48-702-1993 |
液壓傳動.濾油器件和濾油器腔.特性和要求 |
(Hydraulic fluid power. Filter elements and filter housings. Characteristics, requirements.) |
| NF E48-703-1993 |
液壓傳動.串聯過濾器用過濾器件.尺寸 |
(Hydraulic fluid power. Filtr elements for inline filters. Dimensions.) |
| NF E48-704-1995 |
液壓傳動.箱頂回流過濾器用過濾器件.尺寸 |
(Hydraulic fluid power. Filter elements for tank top return filters. Dimensions.) |
| NF E48-705-1998 |
液壓動力.水箱頂部回轉線濾膜.濾膜尺寸 |
(Hydraulic fluid power. Tank top return-line filter. Fitting dimensions.) |
| NF E49-001-1992 |
液壓動力.8bar巴單和雙端帶活塞桿氣缸.孔徑為25mm-200mm.安裝尺寸的互換性 |
(Pneumatic fluid power. 8 bar single and double-ended piston rod cylinders. Bores from 25 mm up to 200 mm. Interchangeability and mounting dimensions.) |
| NF E49-003-1-1992 |
氣壓傳動.10bar氣缸.32mm-320mm缸筒.第1部分:單端帶活塞桿氣缸 |
(PNEUMATIC FLUID POWER. CYLINDERS 10 BAR. BORE 32 MM TO 320 MM. INTERCHANGEABILITY DIMENSIONS. PART 1 : SINGLE-ENDED PISTON ROD CYLINDER.) |
| NF E49-003-2-1993 |
氣動液力傳動.10bar氣缸.32mm-320mm缸筒.第2部分:安裝和附件 |
(PNEUMATIC FLUID POWER. 10 BAR CYLINDERS. 32 MM TO 320 MM BORES. INTERCHANGEABILITY DIMENSIONS. PART 2 : MOUNTING AND ACCESSORIES.) |
| NF E49-003-3-1993 |
氣動液力傳動.10bar氣缸.互換性尺寸.第3部分:雙頭活塞桿氣缸 |
(PNEUMATIC FLUID POWER. 10 BAR CYLINDERS. 32 MM TO 320 MM BORES. INTERCHANGEABILITY DIMENSIONS. PART 3 : DOUBLE-ENDED PISTON ROD CYLINDER.) |
| NF E49-003-4-1995 |
氣動液力傳動.10bar氣缸.32mm-320mm缸筒.第4部分:活塞桿端部帶統一互換銷的氣缸 |
(PNEUMATIC FLUID POWER. 10 BAR CYLINDERS. 32 MM TO 320 MM BORES. INTERCHANGEABILITY DIMENSIONS. PART 4 : CYLINDER WITH ROD END WITH INTEGRATED PIN MOUNTING.) |
| NF E49-003-5-1995 |
氣動液力傳動.10bar氣缸.32mm-320mm缸筒.第5部分:MS 3 高角頭 |
(PNEUMATIC FLUID POWER. 10 BAR CYLINDERS. 32 MM TO 320 MM BORES. INTERCHANGEABILITY DIMENSIONS. PART 5 : HIGHT HEAD ANGLE MS 3.) |
| NF E49-004-1-1998 |
液壓動力.10bar氣缸.袖珍系列,縮小沖程.尺寸互換性.第1部分:內徑由20MM-63MM的信號反應氣缸. |
(PNEUMATIC FLUID POWER. 10 BAR CYLINDERS, COMPACT SERIES, REDUCED STROKE, INTERCHANGEABILITY DIMENSIONS. PART 1 : SINGLE ACTING CYLINDERS, BORES FROM 20 MM TO 63 MM.) |
| NF E49-004-2-1998 |
液壓動力.10bar氣缸.袖珍系列,縮小沖程.尺寸互換性.第2部分:內徑由20MM-100MM的雙反應氣缸. |
(PNEUMATIC FLUID POWER. 10 BAR CYLINDERS, COMPACT SERIES, REDUCED STROKE, INTERCHANGEABILITY DIMENSIONS. PART 2 : DOUBLE ACTING CYLINDERS, BORES FROM 20 MM TO 100 MM.) |
| NF E49-005-2001 |
氣壓液動.氣缸.最終檢驗和驗收標準 |
(Pneumatic fluid power - Cylinders - Final examination and acceptance criteria.) |
| NF E49-030-1992 |
氣壓傳動.單桿起重器.10bar系列(1000kPa).孔徑為8-25mm.安裝尺寸 |
(Pneumatic fluid power. Single rod cylinders 10 bar (1000 kpa) series. Bores from 8 to 25 mm. Mounting dimensions.) |
| NF E49-051-1973 |
氣壓傳動的連接.螺紋連接管.金屬和塑料管 |
(COUPLING FOR PNEUMATIC TRANSMISSIONS.SCREWED COUPLINGS-METAL AND PLASTIC PIPES) |
| NF E49-052-2002 |
氣壓液動.連接件.氣口和螺紋端頭 |
(Pneumatic fluid power - Connections - Ports and stud ends.) |
| NF E49-080-1-2002 |
氣壓液動.五通定向控制閥.第1部分:不帶電連接器的安裝接口 |
(Pneumatic fluid power - Five-port directional control valves - Part 1 : mounting interfaces without electrical connector.) |
| NF E49-080-2-2002 |
氣壓液動.五通方向控制閥.第2部分:任選電氣連接器的安裝接口面 |
(Pneumatic fluid power - Five-port directional control valves - Part 2 : mounting interface surfaces with optional electrical connector.) |
| NF E49-085-1991 |
氣壓傳動.5孔分配器.底座 |
(Pneumatic fluid power. Five-port directional control valves. Subplate.) |
| NF E49-086-1991 |
氣壓傳動.5孔分配器.端部固定、底部使用孔的并列底座 |
(Pneumatic fluid power. Five-port directional control valves. Juxtaposable subplate with bottom service ports and end fixing.) |
| NF E49-090-2-2003 |
氣壓傳動.18mm和26mm五氣口方向控制閥.第2部分:帶光學電接頭的安裝面 |
(Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Part 2 : mounting interfaces with optional electrical connector.) |
| NF E49-091-2002 |
氣壓傳動.控制閥和其它部件的孔口和控制機械的驗證 |
(Pneumatic fluid power - Identification of ports and control mechanisms of control valves and other components.) |
| NF E49-092-2002 |
流壓傳動系統和件.帶接地接點的16mm方形電插頭.特性和要求 |
(Fluid power systems and components - 16 mm square electrical connector with earth contact - Characteristics and requirements.) |
| NF E49-093-2003 |
氣壓傳動.3/2電磁閥.安裝接口表面 |
(Pneumatic fluid power - 3/2 solenoid valves - Mounting interface surfaces.) |
| NF E49-100-1996 |
氣壓傳動.聚酰胺管.尺寸.規范 |
(Pneumatic fluid power. Polyamid tubes. Dimensions. Specifications.) |
| NF E49-101-1994 |
氣壓傳動.聚胺脂管.尺寸.規范 |
(PNEUMATIC FLUID POWER. POLYURETHANE TUBES. DIMENSIONS. SPECIFICATIONS.) |
| NF E49-201-1999 |
氣壓傳動.系統相關的一般規則 |
(PNEUMATIC FLUID POWER. GENERAL RULES RELATING TO SYSTEMS.) |
| NF E49-202-1996 |
機械安全.液力系統和部件的安全要求.氣壓裝置(歐洲標準EN 983) |
(Safety of machinery. Safety requirements for fluid power systems and their components. Pneumatics.) |
| NF E49-300-2000 |
氣流動力.通過管道庫測定空氣借記特性的方法 |
(Pneumatic fluid power - Method of characterization of air debit coefficients by drains reservoir.) |
| NF E49-310-1-1998 |
氣壓傳動.壓縮空氣濾器.第1部分:包含在供應商資料和產品標志要求的主要特性 |
(Pneumatic fluid power. Compressed air filters. Part 1 : main characteristics to be included in supplier`s literature and product-marking requirements.) |
| NF E49-310-2-1998 |
氣壓傳動.壓縮空氣濾器.第2部分:測試包含在供應商資料和產品標志要求的主要特性試驗方法 |
(PNEUMATIC FLUID POWER. COMPRESSED AIR FILTERS. PART 2 : TEST METHODS TO DETERMINE THE MAIN CHARACTERISTICS TO BE INCLUDED IN SUPPLIER`S LITERATURE.) |
| NF E49-320-1-1998 |
氣動液體動力.壓縮空氣潤滑器.第1部分:包含在供應商資料和產品標志要求的主要特性 |
(Pneumatic fluid power. Compressed air lubricators. Part 1 : main characteristics to be included in supplier`s literature and product-marking requirements.) |
| NF E49-320-2-1998 |
氣動液體動力.壓縮空氣潤滑器.第2部分:測定包含在供應商資料和產品標志要求的主要特性的試驗方法 |
(Pneumatic fluid power. Compressed air lubricators. Part 2 : test methods to determine the main characteristics to be included in supplier`s literature.) |
| NF E49-330-1-2000 |
氣流動力.壓縮空氣調節器和過濾器調節器.第1部分:包括在供應商和產品標記要求內的的主要特性 |
(Pneumatic fluid power - Compressed air regulators and filters-regulators - Part 1 : main characteristics to be included in literature from suppliers and product-marking requirements.) |
| NF E49-330-2-2000 |
氣流動力.壓縮空氣調節器和過濾器調節器.第2部分:包括在供應商文件內的主要特性測定的試驗方法 |
(Pneumatic fluid power - Compressed air regulators and filter-regulators - Part 2 : test methods to determine the main characteristics to be included in literature from suppliers.) |
| NF E49-340-1992 |
氣壓傳動.排氣分配器.消聲器試驗規程 |
(Pneumatic fluid power. Directional control valve air exhaust. Test code for silencers.) |
| NF E49-400-1992 |
氣壓液力傳動.8巴工作缸.裝配附件.叉形架和凸榫 |
(Pneumatic fluid power. 8 bar cylinders. Mounting accessories. Fork yokes and tenons.) |
| NF E49-501-1976 |
氣壓傳動系統.氣缸.摩擦力測量.實驗室方法 |
(PNEUMATIC FLUID POWER SYSTEMS. CYLINDERS. MEASUREMENT OF FRICTION FORCES. LABORATORY METHOD.) |
| NF E49-600-1988 |
液壓動力系統和件.液力邏輯路線.第1部分:二進制邏輯及有關功能符號 |
(Fluid-power systems and components. Fluid logic circuit. Part 1 : symbols for binary logic and related functions.) |
| NF E49-601-1990 |
液壓和氣壓傳動.液力邏輯線路.第2部分:與邏輯符號相對應的供液和排液符號 |
(Fluid power systems and components. Fluid logic circuits. Part 2 : symbols for supply and exhausts as related to logic symbols.) |
| NF E49-602-1990 |
液壓和氣壓傳動.液力邏輯電路.第3部分:邏輯程序和相關函數圖形 |
(Fluid power systems and components. Fluid logic circuit. Part 3 : symbols for logic sequencers and related functions.) |
| NF E50-001-1956 |
風力充電機組.小功率風力發電機 |
(WIND CHARGERS. LOW-RATED AEROGENERATORS.) |
| NF E51-001-1968 |
通風機.詞匯.分類 |
(FANS. VOCABULARY. CLASSIFICATION.) |
| NF E51-004-2003 |
工業風機.平衡質量和振動等級規范 |
(Industrial fans - Specifications for balance quality and vibration levels.) |
| NF E51-005-2003 |
工業風機.風機振動的測量方法 |
(Industrial fans - Method of measurement of fan vibration.) |
| NF E51-190-1988 |
通風機.部分危險機械的預防和保護設備 |
(FANS. PREVENTION AND PROTECTION AGAINST SOME MECHANICAL HAZARDS.) |
| NF E51-200-1981 |
壓縮機,氣壓工具和機械.常用詞匯 |
(Compressors, pneumatic tools and machines. General vocabulary.) |
| NF E51-201-1981 |
壓縮機.工具和氣壓機械.壓縮機詞匯 |
(Compressors, pneumatic tools and machines. Vocabulary of compressors.) |
| NF E51-202-1992 |
壓縮機、風動工具和機械.詞匯.風動工具和機械 |
(Compressors, pneumatic tools and machines. Vocabulary. Pneumatic tools and machines.) |
| NF E51-230-2002 |
石油和天然氣工業.旋轉型容積式壓縮機.第1部分:加工壓縮機(無油) |
(Petroleum and natural gas industries - Rotary-type positive displacement compressors - Part 1 : process compressors (oil-free).) |
| NF E51-231-2002 |
石油和天然氣工業.旋轉型容積式壓縮機.第2部分:封裝氣體壓縮機(無油) |
(Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Part 2 : packaged air compressors (oil-free).) |
| NF E51-233-2003 |
石油、化學和氣體工業.離心壓縮機 |
(Petroleum, chemical and gas service industries - Centrifugal compressors.) |
| NF E51-234-2003 |
石油、化學和氣體設備工業.包裝的整體式齒輪分離空氣壓縮機 |
(Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors.) |
| NF E51-235-2003 |
石油和天然氣工業.包裝的往復式氣體壓縮機 |
(Petroleum and natural gas industries - Packaged reciprocating gas compressors.) |
| NF E51-240-1991 |
冷凍液用電動壓縮機.容積式密閉電動壓縮機組和可維修密閉電動壓縮機組.性能說明 |
(REFRIGERANT MOTOR-COMPRESSORS. SEALED REFRIGERANT MOTO-COMPRESSORS AND ACCESSIBLE SEALED REFRIGERANT DISPLACEMENT MOTOR-COMPRESSORS. PRESENTATION OF PERFORMANCE.) |
| NF E51-250-1981 |
壓縮機.分類 |
(Compressors. Classification.) |
| NF E51-290-1996 |
壓縮機和真空泵.安全要求.第1部分:壓縮機 |
(Compressors and vacuum pumps. Safety requirements. Part 1 : compressors.) |
| NF E51-291-1996 |
壓縮機和真空泵.安全要求.第2部分:真空泵 |
(Compressors and vacuum pumps. Safety requirements. Part 2 : vacuum pumps.) |
| NF E51-301-2001 |
壓縮空氣.第1部分:雜質和純度等級 |
(Compressed air - Part 1 : contaminants and purity classes.) |
| NF E51-302-2003 |
一般用途壓縮空氣.第2部分:測定懸浮狀油含量的試驗方法 |
(Compressed air for general use - Part 2 : test methods for aerosol oil content.) |
| NF E51-303-1999 |
壓縮空氣.第3部分:潮濕度測量試驗方法 |
(COMPRESSED AIR. PART 3 : TEST METHODS FOR MEASUREMENT OF HUMIDITY.) |
| NF E51-304-2002 |
壓縮空氣.第4部分:固體顆粒含量的試驗方法 |
(Compressed air - Part 4 : test methods for solid particle content.) |
| NF E51-305-2003 |
壓縮空氣.第5部分:油蒸汽和有機溶劑含量測試方法 |
(Compressed air - Part 5 : test method for oil vapour and organic solvent content.) |
| NF E51-307-2003 |
壓縮空氣.第7部分:活微生物雜質含量的試驗方法 |
(Compressed air - Part 7 : test method for viable microbiological contaminant content.) |
| NF E51-310-1989 |
空氣壓縮機.規范和試驗 |
(COMPRESSED AIR DRYERS. SPECIFICATIONS AND TESTS.) |
| NF E51-311-1996 |
壓縮空氣干燥機.第2部分:性能等級 |
(Compressed air dryers. Part 2 : performances ratings.) |
| NF E51-350-1994 |
風動機.詞匯 |
(Pneumatic tools and machines. Vocabulary.) |
| NF E51-360-1985 |
旋轉，撞擊和旋轉撞擊式氣壓機.運轉試驗 |
(Rotary and percussive pneumatic tools. Performance tests.) |
| NF E51-361-1995 |
螺紋緊固件用旋轉式氣動裝配工具.性能試驗 |
(Rotary tools for threaded fastners. Performance test method.) |
| NF E51-600-2003 |
建筑物通風.符號、術語和圖形符號 |
(Ventilation for buildings - Symbols, terminology and graphical symbols.) |
| NF E51-700-1987 |
機械控制通風構件.術語 |
(Controlled mechanical ventilation components. Terminology.) |
| NF E51-708-2002 |
建筑物的通風.管道工程.軟管的尺寸和機械要求 |
(Ventilation for buildings - Ductwork - Dimensions and mechanical requirements for flexible ducts.) |
| NF E51-711-1991 |
機械控制通風裝置(VMC).機械控制通風裝置的排氣口.規范.規范符合性的檢驗 |
(CONTROLLED MECHANICAL VENTILATION (VMC) COMPONENTS. EXTRACT AIR TERMINAL DEVICES FOR VMC-GAS. CHARACTERISTICS. CHECKING OF COMPLIANCE WITH THE CHARACTERISTICS.) |
| NF E51-713-1992 |
受控的機械通風(VMC)部件.VMC用抽氣終端設備.特性 |
(CONTROLLED MECHANICAL VENTILATION (VMC) COMPONENTS. EXTRACT AIR TERMINAL DEVICES FOR VMC. CHARACTERISTICS.) |
| NF E51-714-1998 |
建筑物通風.矩形截面薄板金屬送氣管和配件.尺寸 |
(VENTILATION FOR BUILDINGS. SHEET METAL AIR DUCTS AND FITTINGS WITH RECTANGULAR CROSS SECTION. DIMENSIONS. (EUROPEAN STANDARD EN 1505).) |
| NF E51-715-1998 |
建筑物通風.圓形截面薄板金屬送氣管和配件.尺寸 |
(Ventilation for buildings. Sheet metal air ducts and fittings with circular cross section. Dimensions.) |
| NF E51-717-2003 |
建筑物的通風.管道系統.環形薄金屬管道的強度和泄漏 |
(Ventilation for buildings - Ductwork - Strength and leakage of circular sheet metal ducts.) |
| NF E51-718-1998 |
建筑物通風.氣體終端設備.調節器和閥門的動力學試驗 |
(Ventilation for buildings. Air terminal devices. Aerodynamic testing of dampers and valves.) |
| NF E51-719-1998 |
建筑用清漆.空中處理件.機械性能 |
(Ventilation for buildings. Air handling units. Mechanical performance.) |
| NF E51-721-2002 |
建筑物通風.管道懸吊裝置和支撐物.強度要求 |
(Ventilation for buildings - Ductwork hangers and supports - Requirements for strength.) |
| NF E51-722-2001 |
建筑物通風.空氣終端裝置.混流設施的空氣動力學試驗和額定值 |
(Ventilation for buildings - Air terminal devices - Aerodynamic testing and rating for mixed flow application.) |
| NF E51-723-2001 |
建筑物通風.空氣終端裝置.排代流設施的空氣動力試驗和額定值 |
(Ventilation for buildings - Air terminal devices - Aerodynamic testing and rating for displacement flow applications.) |
| NF E51-724-2000 |
建筑物通風.安裝通風和空氣調節系統的測量方法和試驗規程 |
(Ventilation for buildings - Test procedures and measuring methods for handing over installed ventilation and air conditioning systems.) |
| NF E51-725-2002 |
建筑物的通風.氣路終端設備.恒流和變流終端設備的氣動試驗和測定 |
(Ventilation for buildings - Air terminal units - Aerodynamic testing and rating of constant and variable rate terminal units.) |
| NF E51-726-2002 |
建筑物的通風.終端.固定百葉窗經受模擬雨的性能試驗 |
(Ventilation for buildings - Terminals - Performance testing of louvres subjected to simulated rain.) |
| NF E51-727-2002 |
建筑物的通風.輸氣設備.設備及零部件的額定特性和性能 |
(Ventilation for buildings - Air handling units - Ratings and performance for units, components and sections.) |
| NF E51-730-2001 |
建筑物通風.終端.以模擬砂為條件的煙囪的性能試驗 |
(Ventilation for buildings - Terminals - Performance testing of louvres subject to simulated sand.) |
| NF E51-731-2002 |
建筑物的通風.在通風孔中測量空氣速度用的儀器要求 |
(Ventilation for buildings - Instrumentation requirements for air velocity measurements in ventilated spaces.) |
| NF E51-733-2003 |
建筑物通風.非金屬管.絕緣制管板材制成的管道設施 |
(Ventilation for buildings - Non-metallic ducts - Ductwork made from insulation ductboards.) |
| NF E51-737-2001 |
建筑物通風.地板固定空氣終端裝置.結構分級試驗 |
(Ventilation for buildings - Floor mounted air terminal devices - Tests for structural classification.) |
| NF E52-016-2001 |
起重機.使用和試驗信息.第1部分:指導 |
(Cranes - Information for use and testing - Part 1 : instructions.) |
| NF E52-017-2000 |
起重機.使用和試驗的信息.第2部分:標記 |
(Cranes - Information for use and testing - Part 2 : marking.) |
| NF E52-019-2-2000 |
提升設備.控制裝置.設計和特性.第2部分:流動式起重機的基本裝配和要求 |
(Lifting appliance - Controls - Layout and characteristics - Part 2 : basic arrangement and requirements for mobile cranes.) |
| NF E52-030-1987 |
起重配件.碳鋼尖嘴和桿的吊鉤 |
(LIFTING APPLIANCES. SHANK HOOK MADE OF CARBON STEEL.) |
| NF E52-031-1987 |
起重配件.合金鋼尖嘴和桿的吊鉤 |
(LIFTING APPLIANCES. SHANK HOOK MADE OF ALLOYED STEEL.) |
| NF E52-032-1973 |
最大毛重３０．４８０T集裝箱提升鉤裝置.規范 |
(DEVICE WITH HOOKS FOR LIFTING FREIGHT CONTAINERS OF UP TO 30.480 TONNES CAPACITY. REQUIREMENTS.) |
| NF E52-034-1987 |
起重配件.帶尖嘴和眼環的吊鉤.Ｍ級吊鉤 |
(LIFTING APPLIANCES. LIFTING HOOKS WITH POINT AND EYE. HOOKS OF GRADE M.) |
| NF E52-037-1-2000 |
吊鏈件.安全性.第1部分:鍛壓鋼件.8級 |
(Components for slings - Safety - Part 1 : forged steel component - Grade 8.) |
| NF E52-037-2-2000 |
吊鏈件.安全性.第2部分:有栓的鍛壓鋼提鉤.8級 |
(Components for slings - Safety - Part 2 : forged steel lifting hooks with latch - Grade 8.) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com