標準號 |
中文名稱 |
英文名稱 |
| NF E01-200-1994 |
壓力設備.壓力/溫度/體積術語 |
(Pressure equipment. Terminology and symbols. Pressure, temperature, volume.) |
| NF E01-201-2-2002 |
壓力設備.第2部分:質量、符號和單位 |
(Pressure equipment - Part 2 : quantities, symbols and units.) |
| NF E01-201-3-2002 |
壓力設備.第3部分:定義和有關方面 |
(Pressure equipment - Part 3 : definition and parties involved.) |
| NF E01-201-4-2003 |
壓力設備.金屬材料的技術交貨條件的確立 |
(Pressure equipment - Part 4 : establishment of technical delivery conditions for metallic materials.) |
| NF E01-201-5-2003 |
壓力設備.第5部分:材料合格和檢驗用文件 |
(Pressure equipment - Part 5 : compliance and inspection documentation of materials.) |
| NF E01-201-7-2002 |
壓力設備.第7部分:不用火加熱的壓力設備的安全系統 |
(Pressure equipment - Part 7 : safety systems for unfired pressure equipment.) |
| NF E02-100-1-1993 |
公差和配合的ISO系統.第1部分:公差、偏差和配合的基礎(歐洲標準EN 20286-1) |
(Iso system of limits and fits. Part 1 : bases of tolerances, deviations and fits.) |
| NF E02-100-2-1993 |
ISO公差和配合體系.第2部分:孔徑和軸的標準公差和極限誤差等級表 |
(Iso system of limites and fits. Part 2 : tables of standard tolerance grades and limit deviations for holes and shafts.) |
| NF E02-200-1994 |
光滑零件公差的檢驗.極限規.總則、定義、控制及使用 |
(Inspection of tolerances of plain workpieces. Limit gauges. General, definitions, control, use.) |
| NF E02-202-1994 |
光滑工件公差的檢驗.極限規.高達500mm的“生產 ”極限規的公差與允許磨損 |
(Inspection of tolerances of plain workpieces. Limit gauges. Tolerances and permissible wear of manufacture limit gauges up to 500 mm.) |
| NF E02-205-1994 |
光滑零件公差的檢驗.極限規.高達500mm的驗收規的公差與允充許磨損 |
(Inspection of tolerances of plain workpieces. Limit gauges. Tolerances and permissible wear of acceptance gauges up to 500 mm.) |
| NF E02-310-1981 |
鋼制規.莫氏錐塞規 |
(STEEL GAUGES. MORSE TAPER PLUG GAUGES.) |
| NF E02-311-1981 |
鋼制規.榫式莫氏錐塞規 |
(STEEL GAUGES. MORSE TAPER PLUG GAUGES WITH TANG.) |
| NF E02-312-1981 |
鋼制規.螺絲孔莫氏錐環規 |
(STEEL GAUGES. MORSE TAPER RING GAUGES.) |
| NF E02-313-1981 |
鋼制規.榫式莫氏錐環規 |
(STEEL GAUGES. MORSE TAPER RING GAUGES WITH TANG.) |
| NF E02-314-1981 |
鋼制規.５％錐度塞規 |
(STEEL GAUGES. METRIC TAPER PLUG GAUGES.) |
| NF E02-315-1981 |
鋼制規.榫式５％錐度塞規 |
(STEEL GAUGES. METRIC TAPER PLUG GAUGES WITH TANG.) |
| NF E02-316-1981 |
鋼制規.螺絲孔５％錐度環規 |
(STEEL GAUGES. METRIC TAPER RING GAUGES.) |
| NF E02-317-1981 |
鋼制規.榫式５％錐度環規 |
(STEEL GAUGES. METRIC TAPER RING GAUGES WITH TANG.) |
| NF E02-318-1981 |
鋼制規.７／２４錐度塞規 |
(STEEL GAUGES. 7/24 TAPER PLUG GAUGES.) |
| NF E02-319-1981 |
鋼制規.７／２４錐度環規 |
(STEEL GAUGES. 7/24 TAPER RING GAUGES.) |
| NF E02-350-2-1993 |
通用公差.第2部分:未注單個公差的零部件的幾何公差 |
(GENERAL TOLERANCES. PART 2 : GEOMETRICAL TOLERANCES FOR FEATURES WITHOUT INDIVIDUAL TOLERANCE INDICATIONS. (EUROPEAN STANDARD EN 22768-2).) |
| NF E02-352-1999 |
幾何產品規范(GPS).切割和彎曲細工品.無特殊公差指示的尺寸和部件的尺寸和幾何公差 |
(GEOMETRICAL PRODUCT SPECIFICATIONS (GPS). CUTTED AND BENDED WORKPIECES. DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR DIMENSIONS AND FEATURES WITHOUT INDIVIDUAL TOLERANCES.) |
| NF E02-353-2001 |
幾何產品規范(GPS).凹槽部件.無特殊公差指示的尺寸和部件的尺寸和表面平整公差 |
(Geometrical products specification (GPS) - Chased parts - Dimensional and surface eveness tolerances for dimensions and parts without individual tolerances.) |
| NF E03-004-1981 |
螺紋密封的(燃?xì)?管道螺紋(錐形外螺紋和圓柱形內螺紋) |
(Pipe threads where pressure tight joints are made on the threads (tapered external thread and parallel internal thread).) |
| NF E03-005-1-2003 |
非壓力密封連接的管螺紋 第1部分:標記、尺寸和公差 |
(Pipe threads where pressure-tight joints are not made on the threads - Part 1 : dimensions, tolerances and designation.) |
| NF E03-005-1981 |
無螺紋密封的(燃?xì)?管道螺紋(圓柱形內螺紋和外螺紋) |
(Pipe threads where pressure tight joints are not made on the threads (parallel internal and external threads).) |
| NF E03-005-2-2003 |
非螺紋密封的管螺紋 第2部分:用極限量規檢驗 |
(Pipe threads where pressure-tight joints are not made on the threads - Part 2 : verification by means of limit gauges.) |
| NF E03-152-1981 |
用極限量規檢驗螺紋.螺釘用螺紋規 |
(Thread checking with limit gauges. Threaded gauges for screw.) |
| NF E03-153-1975 |
公制三角螺紋.用極限規檢驗螺紋.絲錐螺紋檢查儀，零件的公差按Ｅ０３－０５１ |
(CHECKING OF THREADS WITH LIMIT GAUGES-THREADED GAUGES FOR NUTS.) |
| NF E03-154-1970 |
公制三角螺紋.用極限規檢驗螺紋.螺釘和螺釘孔光滑度檢查器 |
(THREAD CHECKING WITH LIMIT GAUGES. PLAIN GAUGES FOR SCREWS AND NUTS.) |
| NF E03-161-1982 |
稱作“煤氣管道”的管路螺紋.用極限規檢查圓柱螺紋.前言 |
(Checking of parallel pipe threads with limit gauges. Introduction.) |
| NF E03-162-1982 |
稱作“煤氣管道”的管路螺紋.用極限規檢查圓柱螺紋.外螺紋檢查儀 |
(Checking of parallel pipe threads with limit gauges. Threaded gauges for screws.) |
| NF E03-163-1982 |
稱作“煤氣管道”的管路螺紋.用極限規檢查圓柱螺紋.內螺紋檢查儀 |
(Checking of parallel pipe threads with limit gauges. Threaded gauges for nuts.) |
| NF E03-165-1984 |
稱作“煤氣管道”的管路螺紋.用極限規檢查圓柱螺紋.螺紋密封的管道螺紋(按標準ＮＦＥ０３－００４) |
(Checking of pipe threads where pressure tight joints are made on the threards with limit gauges (according to NF E 03-004).) |
| NF E03-501-1970 |
ISO微型車螺紋.牙形件 |
(ISO miniature screw threads.profile.) |
| NF E03-502-1970 |
ISO微型車螺紋.總圖 |
(ISO miniature screw threads.general plan.) |
| NF E03-503-1970 |
ISO微型車螺紋.公差.總圖 |
(ISO miniature screw threads.tolerances.general plan.) |
| NF E03-504-1970 |
ISO微型車螺紋.公差.極限尺寸表 |
(ISO miniature screw threads.tolerances.tables for limits of sizes.) |
| NF E03-601-1974 |
額定推力的錐形螺紋 |
(TAPER PIPE THREADS,NPT.) |
| NF E03-611-1982 |
３°和４５°角所謂炮型非對稱梯形螺紋.基本剖面.尺寸和公差 |
(Asymmetrical trapezoidal screw thread, artillery type, 3 degrees-45 degrees. Basic profile. Dimensions and tolerances.) |
| NF E03-612-1982 |
３°和４５°角所謂大炮型非對稱梯形螺紋.用極限規檢查 |
(ASYMMETRICAL TRAPEZOIDAL SCREW THREAD,ARTILLERY TYPE,3 DEGREES- 45 DEGREES. CHECKING BY LIMIT GAUGES.) |
| NF E04-012-1-1996 |
技術制圖.螺釘和螺紋部件.第1部分:通用規范 |
(Technical drawings. Screw threads and threaded parts. Part 1 : general conventions.) |
| NF E04-012-2-1996 |
技術制圖.螺釘和螺紋部件.第2部分:螺紋嵌鑲件 |
(TECHNICAL DRAWINGS. SCREW THREADS AND THREADED PARTS. PART 2 : SCREW THREAD INSERTS. (EUROPEAN STANDARD EN ISO 6410-2).) |
| NF E04-012-3-1996 |
技術制圖.螺釘和螺紋部件.第3部分:簡化表示 |
(TECHNICAL DRAWINGS. SCREW THREADS AND THREADS AND THREADED PARTS. PART 3 : SIMPLIFIED REPRESENTATION. (EUROPEAN STANDARD EN ISO 6410-3).) |
| NF E04-014-1933 |
機械、電氣和相關工業的技術圖，構架的鉚釘和螺栓的圖上符號表示法（１９８１．９確認） |
(TECHNICAL DRAWINGS FOR MECHANICAL,ELECTRICAL AND CONNECTED INDUSTRIES. GRAPHICAL SYMBOLS ON DRAWINGS FOR RIVETS AND BOLTS.) |
| NF E04-015-1-1995 |
運動圖.圖形符號.第1部分(歐洲標準EN ISO 3952-1) |
(Kinematic diagrams. Graphical symbols. Part 1.) |
| NF E04-015-2-1995 |
運動圖.圖形符號.第2部分 |
(Kinematic diagrams. Graphical symbols. Part 2.) |
| NF E04-015-3-1995 |
運動圖.圖形符號.第3部分 |
(Kinematic diagrams. Graphical symbols. Part 3.) |
| NF E04-015-4-1998 |
動量圖.圖形符號.第4部分 |
(Kinematic diagrams - Graphical symbols - Part 4.) |
| NF E04-056-1992 |
液壓和氣壓傳動.圖解符號和電路圖.第1部分:圖解符號(ISO 1219-1-92) |
(Fluid power systems and components. Graphic symbols and circuit diagrams. Part 1 : graphic symbols.) |
| NF E04-057-1998 |
液壓系統和件.圖形符號和電路圖.第2部分:電路圖 |
(Fluid power systems and components. Graphic symbols and circuits diagrams. Part 2 : circuit diagrams.) |
| NF E04-114-1-1995 |
技術制圖.滾動軸承.第1部分:通用簡化畫法 |
(Technical drawings. Rolling bearings. Part 1 : general simplified representation.) |
| NF E04-114-2-1998 |
技術制圖.滾動軸承.第2部分:詳細簡化畫法 |
(TECHNICAL DRAWINGS. ROLLING BEARINGS. PART 2 : DETAILED SIMPLIFIED REPRESENTATION. (EUROPEAN STANDARD EN ISO 8826-2).) |
| NF E04-115-1996 |
技術產品文獻加工.彈簧.第1部分:簡化表示法(歐洲標準EN ISO 2162-1) |
(Technical product documentation. Springs. Part 1 : simplified representation.) |
| NF E04-116-1998 |
技術制圖.中心孔的簡化表示法 |
(Technical drawings. Simplified representation of centre holes.) |
| NF E04-117-1995 |
玻璃器皿的技術制圖 |
(Technical drawings for glassware.) |
| NF E04-118-1-1995 |
技術制圖.管道的簡化表示法.第1部分:通則和正交表示法 |
(Technical drawings. Simplified representation of pipelines. Part 1 : general rules and orthogonal representation.) |
| NF E04-118-2-1995 |
技術制圖.管道的簡化表示法.第2部分:等角投影 |
(Technical drawings. Simplified representation of pipelines. Part 2 : isometric projection.) |
| NF E04-118-3-1996 |
技術制圖.管道的簡化表示法.第3部分:通風和排放系統終端部件 |
(TECHNICAL DRAWINGS. SIMPLIFIED REPRESENTATION OF PIPELINES. PART 3 : TERMINAL FEATURES OF VENTILATION AND DRAINAGE SYSTEMS. (EUROPEAN STANDARD EN ISO 6412-3).) |
| NF E04-119-1995 |
技術制圖.花鍵和鋸齒形花鍵的表示方法(歐洲標準EN ISO 6413) |
(Technical drawings. Representation of splines and serrations.) |
| NF E04-120-1999 |
技術制圖.棒和輪廓剖面的簡化表示法 |
(Technical drawings. Simplified representation of bars and profile sections.) |
| NF E04-121-2003 |
技術制圖.粘合、折疊和疊壓接縫的符號指示和表示法 |
(Technical drawings - Symbolic presentation and indication of adhesive, fold and pressed joints.) |
| NF E04-130-1-1995 |
技術制圖.動密封應用.第1部分:簡化畫法 |
(Technical drawings. Seals for dynamic application. Part 1 : general simplified representation.) |
| NF E04-130-2-1995 |
技術制圖.動密封應用.第2部分:簡化畫法細則 |
(Technical drawings. Seals of dynamic application. Part 2 : detailed simplified representation.) |
| NF E04-131-1995 |
技術制圖.模壓、鑄壓和鍛壓件的簡單表示法 |
(Technical drawings. Simplified representation of moulded, cast and forged parts.) |
| NF E04-132-2000 |
技術制圖.未定義形狀的邊緣.詞匯和制圖說明 |
(Technical drawings - Edges of undefined shape - Vocabulary and indication on drawings.) |
| NF E04-201-1994 |
工業流程控制.圖形符號.第201部分:真空技術. |
(Industrial processes. Symbolic representation. Vacuum technology.) |
| NF E04-202-1-1996 |
工業加工用管道、管道件和儀器.圖形符號展示.第1部分:基本要求 |
(Pipelines, pipe components and apparatus for industrial processes. Symbolic representation. Part 1 : basic requirements.) |
| NF E04-202-2-1996 |
工業加工用管道、管道件和儀器.圖形符號表示.第2部分:管道和接頭 |
(Pipelines, pipe components and apparatus for industrial processes. Symbolic representation. Part 2 : pipelines and junctions.) |
| NF E04-202-3-1996 |
工業加工用管道、管道件和儀器.圖形符號表示.第3部分:機械傳動和流體驅替件 |
(Pipelines, pipe components and apparatus for industrial processes. Symbolic representation. Part 3 : mechanical drive and fluid displacement components.) |
| NF E04-202-4-1996 |
工業加工用管道、管道件和儀器.圖形符號表示.第4部分:加熱設備 |
(Pipelines, pipe components and apparatus for industrial processes. Symbolic representation. Part 4 : heat equipment.) |
| NF E04-202-8-2003 |
工業加工用管道、管道件和儀器.圖形符號表示.第8部分:粉碎、成型和其他工藝 |
(Pipelines, pipe components and apparatus for industrial processes - Symbolic representation - Part 8 : comminution, shaping and other process.) |
| NF E04-202-9-2003 |
工業加工用管道、管道件和儀器.圖形符號表示.第9部分:存儲和搬運 |
(Pipelines, pipe components and apparatus for industrial processes - Symbolic representation - Part 9 : storage, handling.) |
| NF E04-203-1-1991 |
工業過程調節、測量和自動調節.符號表示法.第1部分:基本要求 |
(Control, measurement and automation for industrial processes. Symbolic representation. Part 1 : functions and basic requirements.) |
| NF E04-270-2002 |
加工工廠的流程圖.總則 |
(Flow diagrams for process plants - General rules.) |
| NF E04-500-2000 |
技術產品文獻.限制文獻和產品使用的保護通告 |
(Technical product documentation - Protection notices for restricting the use of documents and products.) |
| NF E04-501-2-1996 |
技術產品文獻加工.詞匯.第2部分:有關投射方法的術語 |
(Technical product documentation. Vocabulary. Part 2 : terms relating to projection methods.) |
| NF E04-502-1999 |
技術產品文獻.圖紙的尺寸和布局(EN ISO 5457) |
(Technical product documentation. Sizes and layout of drawing sheets.) |
| NF E04-503-1978 |
工程制圖.一般原則.標題格式 |
(ENGINEERING DRAWINGS. GENERAL PRINCIPLES. TITLE BLOCKS.) |
| NF E04-504-1978 |
技術制圖.一般原則.定義術語 |
(TECHNICAL DRAWINGS. GENERAL PRINCIPLES. DEFINING NOMENCLATURE.) |
| NF E04-505-0-1998 |
技術產品文獻.按字母分類.第0部分:一般要求 |
(Technical product documentation. Lettering. Part 0 : general requirements.) |
| NF E04-505-2-2000 |
技術產品文獻.字體.第2部分:拉丁字母、數字和標記 |
(Technical product documentation - Lettering - Part 2 : latin alphabet, numerals and marks.) |
| NF E04-505-3-2000 |
技術產品文獻.字體.第3部分:希臘字母 |
(Technical product documentation - Lettering - Part 3 : greek alphabet.) |
| NF E04-505-4-2000 |
技術產品文獻.字體.第4部分:拉丁字母的區別標記與特殊標記 |
(Technical product documentation - Lettering - Part 4 : diacritical and particular marks for the Latin alphabet.) |
| NF E04-505-5-1998 |
技術產品文獻.文字書寫.第5部分:拉丁字母、數字和標志的CAD寫法 |
(Technical product documentation. Lettering. Part 5 : CAD lettering of the Latin alphabet, numerals and marks.) |
| NF E04-505-6-2000 |
技術產品文獻.字體.第6部分:西里爾字符 |
(Technical product documentation - Lettering - Part 6 : cyrillic alphabet.) |
| NF E04-506-1995 |
技術制圖.比例尺 |
(Technical drawings. Scales.) |
| NF E04-507-1978 |
技術制圖.一般原則.圖紙折疊法 |
(TECHNICAL DRAWINGS. GENERAL PRINCIPLES. FOLDING OF DRAWING SHEETS.) |
| NF E04-508-4-2001 |
技術制圖.投影法.第4部分:中心投影 |
(Technical drawings - Projection methods - Part 4 : central projection.) |
| NF E04-511-1995 |
技術制圖.幾何形位公差的符號.比例和尺寸 |
(Technical drawings. Symbols for geometrical tolerancing. Proportions and dimensions.) |
| NF E04-520-2003 |
技術圖紙.圖形表示的一般原則.第1部分:前言和索引 |
(Technical drawings - General principles of presentation - Part 1 : introduction and index.) |
| NF E04-522-1995 |
技術制圖.零件標引 |
(Technical drawings. Item references.) |
| NF E04-524-1-2001 |
技術制圖.畫法的一般原則.第20部分:直線的基本規定 |
(Technical drawings - General principles of presentation - Part 20 : basic conventions for lines.) |
| NF E04-524-2-2001 |
技術制圖.畫法的一般原則.第21部分:用計算機輔助設計(CAD)系統畫直線 |
(Technical drawings - General principles of presentation - Part 21 : preparation of lines by CAD-systems.) |
| NF E04-524-3-1999 |
技術制圖.展示的一般規則.第22部分:標題線和參考線的慣例和應用 |
(TECHNICAL DRAWINGS. GENERAL PRINCIPLES OF PRESENTATION. PART 22 : BASIC CONVENTIONS AND APPLICATIONS FOR LEADER LINES AND REFERENCE LINES.) |
| NF E04-524-4-1999 |
技術制圖.展示的一般規則.第24部分:機械工程制圖線 |
(TECHNICAL DRAWINGS. GENERAL PRINCIPLES OF PRESENTATION. PART 24 : LINES ON MECHANICAL ENGINEERING DRAWINGS.) |
| NF E04-524-5-2002 |
技術制圖.表示的一般原則.第25部分:造船繪圖線 |
(Technical drawings - General principles of presentation - Part 25 : lines on shipbuilding drawings.) |
| NF E04-525-1-2001 |
技術制圖.畫法的一般原則.第30部分:視圖的基本慣例 |
(Technical drawings - General principles of presentation - Part 30 : basic conventions for views.) |
| NF E04-526-1-2001 |
技術制圖.畫法的一般原則.第40部分:切面和截面的基本換算 |
(Technical drawings - General principles of presentation - Part 40 : basic conventions for cuts and sections.) |
| NF E04-526-2-2001 |
技術制圖.畫法的一般原則.第44部分:機械工程繪圖部分 |
(Technical drawings - General principles of presentation - Part 44 : sections on mechanical engineering drawings.) |
| NF E04-527-2001 |
技術制圖.畫法的一般原則.第50部分:切圖和分圖表示區域的基本慣例 |
(Technical drawings - General principles of presentation - Part 50 : basic conventions for representing areas on cuts and sections.) |
| NF E04-552-1983 |
技術制圖.確定幾何公差.總則，定義，符號，圖紙說明 |
(Technical drawings. Geometrical tolerancing. Generalities, definitions, symbols, indications on drawings.) |
| NF E04-554-1988 |
技術制圖.標注尺寸和公差.幾何公差參照和參照系統 |
(Technical drawings. Dimensioning and tolerancing. Datums and datum-systems for geometrical tolerances.) |
| NF E04-556-1995 |
技術制圖.外形尺寸和公差 |
(TECHNICAL DRAWINGS. DIMENSIONING AND TOLERANCING OF PROFILES. (EUROPEAN STANDARD EN ISO 1660).) |
| NF E04-559-1999 |
幾何產品規范.幾何公差.位置公差(EN ISO 5458) |
(Geometrical product specifications (GPS). Geometrical tolerancing. Positional tolerancing.) |
| NF E04-560-1-1999 |
產品幾何量技術規范(GPS).幾何特性.第1部分:一般條款和定義 |
(Geometrical Product Specifications (GPS) - Geometrical features - Part 1 : general terms and definitions.) |
| NF E04-560-2-1999 |
產品幾何量技術規范(GPS).幾何特征.第2部分:筒和錐體的抽取中線、抽取中間界面、抽取特征的局部尺寸 |
(Geometrical Product Specifications (GPS) - Geometric features - Part 2 : extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature.) |
| NF E04-565-1994 |
技術制圖.尺寸和公差.非鋼性部件 |
(Technical drawings - Dimensioning and tolerancing - Non-rigid parts.) |
| NF E04-601-1-1989 |
技術制圖.數控繪圖機.第1部分:詞匯 |
(Technical drawings. Numerically controlled draughting machines. Part 1 : vocabulary.) |
| NF E04-602-1-1993 |
數字控制制圖機.性能評定用制圖試驗.第1部分:定向繪圖機 |
(Numerically controlled draughting machines. Drawing test for the evaluation of performance. Part 1 : vector plotters.) |
| NF E04-701-1-1989 |
用繪圖墨水的手持式描圖紙專用筆的管狀筆尖.第1部分:定義、尺寸、命名及標志 |
(Tubular tips for hand-held technical pens using india ink on tracing paper. Part 1 : definitions, dimensions, designation and marking.) |
| NF E04-701-2-1989 |
用繪圖墨水的手持式描圖紙專用筆的管狀筆尖.第2部分:性能測試參數和測試條件 |
(Tubular tips for hand-held technical pens using india ink on tracing paper. Part 2 : performance, test parameters and test conditions.) |
| NF E04-703-1-1989 |
書寫和符號用模板.第1部分:一般規定和識別標志 |
(Templates for lettering and symbols. Part 1 : general principles and identification markings.) |
| NF E04-703-3-1989 |
書寫和符號用的模板.第3部分:符合ISO 9175-1的管狀筆尖繪圖筆用模型槽寬度 |
(Templates for lettering and symbols. Part 3 : slot widths for technical pens with tubular tips in accordance with iso 9175-1.) |
| NF E04-706-1989 |
管狀記錄筆.圓規銜接器 |
(Tubular technical pens. Adaptor for compasses.) |
| NF E04-707-1-1990 |
機械鉛筆.第1部分:分類,尺寸,性能要求和試驗 |
(Mechanical pencils. Part 1 : classification, dimensions, performance requirements and testing.) |
| NF E04-707-2-1990 |
機械鉛筆.第2部分:黑鉛.分類和尺寸 |
(Mechanical pencils. Part 2 : balck leads. Classification and dimensions.) |
| NF E04-707-3-1994 |
制圖自動鉛筆.第3部分:石墨.HB鉛筆芯彎曲強度 |
(Mechanical pencils. Part 3 : black leads. Bending strengths of hb leads.) |
| NF E04-710-1-1992 |
帶或不帶分度的繪圖儀器.第1部分:繪圖比例尺 |
(Draughting instruments with or without graduation. Part 1 : draughting scale rulers.) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com