標準號 |
中文名稱 |
英文名稱 |
| NF C93-910-10-2001 |
光纖導線接口.第10部分:小型MPO型導線系列 |
(Fibre optic connector interfaces - Part 10 : type Mini-MPO connector family.) |
| NF C93-910-12-2000 |
光纖連接器接口.第12部分:FS 型連接器門類 |
(Fibre optic connector interfaces - Part 12 : type FS connector family.) |
| NF C93-910-13-2000 |
纖維光學連接器接口.第13部分:FC-PC型連接器門類 |
(Fibre optic conector interfaces - Part 13 : type FC-PC connector family.) |
| NF C93-910-15-2001 |
光纖連接器接口.第15部分:LSH型連接器系列 |
(Fibre optic connector interfaces - Part 15 : type LSH connector family.) |
| NF C93-910-16-2000 |
光纖連接器接口.第16部分:PN型連接器系列 |
(Fibre optic connector interfaces - Part 16 : type PN connector family.) |
| NF C93-910-19-2002 |
光纖連接器接口.第19部分:SG型連接器系列 |
(Fibre optic connector interfaces - Part 19 : type SG connector family.) |
| NF C93-910-2-1997 |
光纖連接器接口.第2部分:BFOC/2,5型連接器系列 |
(Fibre optic connector interfaces. Part 2 : type BFOC/2,5 connector family.) |
| NF C93-910-4-1997 |
纖維光學連接器接口.第4部分:SC型連接器系列 |
(Fibre optic connector interfaces. Part 4 : type SC connector family.) |
| NF C93-910-4/A1-2000 |
纖維光學連接器接口.第4部分:SC型連接器門類 |
(Fibre optic connector interfaces - Part 4 : type SC connector family.) |
| NF C93-910-4/A2-2001 |
光纖連接器接口.第4部分:SC型連接器系列 |
(Fibre optic connector interfaces - Part 4 : type SC connector family.) |
| NF C93-910-6-1998 |
纖維光學連接器接口.第6部分:MU型連接器系列 |
(Fibre optic connector interfaces. Part 6 : type MU connector family.) |
| NF C93-910-6/A1-2001 |
光纖導線接口.第6部分:MU型導線系列 |
(Fibre optic connector interfaces - Part 6 : type MU connector family.) |
| NF C93-910-8-1998 |
纖維光學連接器的接口.第6部分:MU型連接族 |
(Fibre optic connector interfaces. Part 8 : type CF08 connector family.) |
| NF C93-911-1-1997 |
光纖端件.第1部分:空白詳細規范 |
(Fibre optic terminus sets. Part 1-1 : blank detail specification.) |
| NF C93-911-1997 |
光纖端件.第1部分:總規范 |
(Fibre optic terminus sets. Part 1 : generic specification.) |
| NF C93-912-1-1997 |
光纖適配器.第1-1部分:空白詳細規范 |
(Fibre optic adaptors. Part 1-1 : blank detail specification.) |
| NF C93-912-1997 |
光纖適配器.第1部分:總規范 |
(Fibre optic adaptors. Part 1 : generic specification.) |
| NF C93-913-1-2001 |
光學通信用光纖互連裝置和無源件的可靠性.第1部分:介紹指南和定義 |
(Reliability of fibre optic interconnecting devices and passive components for optical communications - Part 1 : introductory guide and definitions.) |
| NF C93-913-2-2001 |
纖維光學互連裝置和無源件的可靠性.第2部分:基于加速老化試驗的可靠性定量評價.溫度、濕度和穩定狀態 |
(Reliability of fibre optic interconnecting devices and passive components - Part 2 : quantitative assessment of reliability based on accelerated ageing tests - Temperature and humidity, steady state.) |
| NF C93-913-3-2001 |
光纖互連裝置和無源件的可靠性.第3部分:評價無源件失敗模塊和方法的相應試驗 |
(Reliability of fibre optic interconnecting devices and passive components - Part 3 : relevant tests for evaluating failure modes and failure mechanisms for passive components.) |
| NF C93-913-4-2000 |
光纖互連裝置和無源光學部件的可靠度.第4部分:產品屏蔽 |
(Reliability of fibre optic interconnecting devices and passive optical components - Part 4 : product screening.) |
| NF C93-914-2000 |
光纖和光纜用機械接合和熔接保護器.第1部分:總規范 |
(Mechanical splices and fusion splice protectors for optical fibres and cables - Part 1 : generic specification.) |
| NF C93-915-1-2001 |
光纖循環器.總規范 |
(Fibre optic circulators - Generic specification.) |
| NF C93-916-1-2002 |
纖維光學空間開關.第1部分:一般規范 |
(Fibre optic spatial switches - Part 1 : generic specification.) |
| NF C93-918-2001 |
光纖波長開關.總規范 |
(Fibre optic wavelength switches - Generic specification.) |
| NF C94-110-1989 |
無線電發射設備的安全要求 |
(Safety requirements for radio transmitting equipment.) |
| NF C94-110/A1-1992 |
NF EN 60215-1989的修改1 |
() |
| NF C94-110/A2-1995 |
NF EN 60215-1989的修改2 |
() |
| NF C94-1101-1992 |
NF C94-110-89的修改件1.(歐洲標準EN 60215的修改件1) |
() |
| NF C94-1102-1995 |
NF C94-110 89年6月補充件2 |
() |
| NF C94-221-2000 |
無線電發射機的測量方法.第1部分:廣播發射機的總特征 |
(Methods of measurement for radio transmitters - Part 1 : general characteristics for broadcast transmitters.) |
| NF C94-225-1994 |
無線電發射機的測量方法.第5部分:電視發射機的特性 |
(Methods of measurement for radio transmitters. Part 5 : performance characteristics of television transmitters.) |
| NF C94-228-1995 |
無線電發射機的測量方法.第8部分:檢驗電視發射機和換位器用的殘留邊帶解調器的性能特征 |
(Methods of measurement for radio transmitters. Part 8 : performance characteristics of vestigial-sideband demodulators used for testing television transmitters and transposers.) |
| NF C94-229-1995 |
無線電發射機的測量方法.第9部分:電視換位器的特性 |
(Methods of measurement for radio transmitters. Part 9 : performance characteristics for television transposers.) |
| NF C94-230-1993 |
無線電發射機的測量方法.第10部分:采用插入測試信號法對電視發射機和轉發機的測量 |
(Methods of measurement for radio transmitters. Part 10 : methods of measurement for television transmitters and transposers employing insertion test signals.) |
| NF C94-231-1993 |
無線電發射機的測量方法.第11部分:無線電差轉機的測量方法 |
(Methods of measurement for radio transmitters. Part 11 : transposers for fm sound broadcasting.) |
| NF C94-232-1-1993 |
無線電發射機的測量方法.第12部分:音響設備和電視播放設備用發射機和換位器的草擬說明導則.第1節:規定特性 |
(Methods of measurement for radio transmitters. Part 12 : guideline for drawing up descriptive leaflets for transmitters and transposers for soud and television broadcasting. Characteristics to be specified.) |
| NF C94-232-2-1993 |
無線電發射機的測量方法.第12部分:音響設備和電視播放設備用發射機和換位器的草擬說明導則.第2節:說明卡 |
(Methods of measurement for radio transmitters. Part 12 : guidelines for drawing up descriptive leaflets for transmitters and transposers for sound and television broadcasting. Specification sheets.) |
| NF C94-233-1993 |
無線電發射機的測量方法.第13部分:調頻廣播的特性 |
(Methods of measurement for radio transmitters. Part 13 : performance characteristics for fm sound broadcasting.) |
| NF C94-234-1997 |
無線電發射機的測量方法.第14部分:使用同樣的或臨近天線的兩個或更多的發射機產生的外部相互調制產物 |
(Methods of measurement for radio transmitters. Part 14 : external intermodulation products caused by two or more transmitters using the same or adjacent antennas.) |
| NF C94-235-2000 |
無線電發射機的測量方法.第15部分:聲音廣播用的調幅發射機 |
(Methods of measurement for radio transmitters - Part 15 : amplitude-modulated transmitters for sound broadcasting.) |
| NF C94-566-1998 |
射頻電磁場暴露測量.頻率范圍100KHZ-1GHZ的場強 |
(Measurement of exposure to radio-frequency electromagnetic fields. Field strength in the frequency range 100 kHz to 1 GHz.) |
| NF C94-864-2-1998 |
廣播傳輸或傳輸系統和管理設備之間互聯標準,第2部分:用數據總線型互聯界面標準 |
(Standardization of interconnections between broadcasting transmitters or transmitter systems and supervisory equipment. Part 2 : interface standards for systems using data bus type interconnections.) |
| NF C95-230-2002 |
陰極射線管的機械安全 |
(Mechanical safety of cathode ray tubes.) |
| NF C96-001-1984 |
電子件.半導體器件.分立件和集成電路.第1部分:總則 |
(Electronic components. Semiconductor devices. Discrete devices and integrated circuits. Part 1 : general.) |
| NF C96-002-2001 |
半導體器件.分立器件和集成電路.第2部分:整流二極管 |
(Semiconductor devices - Discrete devices and integrated circuits - Part 2 : rectifier diodes.) |
| NF C96-003-1986 |
半導體器件.分立器件和集成電路.第3部分:信號(包括開關)和整流二極管 |
(Semiconductor devices. Discrete devices and integrated circuits. Part 3 : signal (including switching) and regulator diodes.) |
| NF C96-005-1-2001 |
半導體分立器件和集成電路.第5-1部分:光電器件.總則 |
(Discrete semiconductor devices and integrated circuits - Part 5-1 : optoelectronic devices - General.) |
| NF C96-005-1/A1-2002 |
分立式半導體器件和集成電路.第5-1部分:光電器件.通則 |
(Discrete semiconductor devices and integrated circuits - Part 5-1 : optoelectronic devices - General.) |
| NF C96-005-1/A2-2002 |
半導體分立器件和集成電路.第5-1部分:光電子器件.總則 |
(Discrete semiconductor devices and integrated circuits - Partie 5-1 : optoelectronic devices - General.) |
| NF C96-005-1994 |
分立器件和集成電路.第5部分:光電器件測量方法 |
(Discrete devices and integrated circuits. Part 5 : optoelectronic devices.) |
| NF C96-005-2-2001 |
分立半導體器件和集成電路.第5-2部分:光電器件.基本額定值和特性 |
(Discrete semiconductor devices and integrated circuits - Part 5-2 : optoelectronic devices - Essential ratings and characteristics.) |
| NF C96-005-2/A1-2003 |
半導體分立器件和集成電路.第5-2部分:光電子器件.基本額定值及特性 |
(Discrete semiconductor devices and integrated circuits - Partie 5-2 : optoelectronic devices - Essential ratings and characteristics.) |
| NF C96-005-3-2001 |
分立半導體器件和集成電路.第5-3部分:光電設備.測量方法 |
(Discrete semiconductor devices and integrated circuits - Part 5-3 : optoelectronic devices - Measuring methods.) |
| NF C96-005-3/A1-2002 |
半導體分立器件和集成電路.第5-3部分:光電子器件.測量方法 |
(Discrete semiconductor devices and integrated circuits - Partie 5-3 : optoelectronic devices - Measuring methods.) |
| NF C96-006-1984 |
電子器件.半導體器件.分立器件和集成電路.第6部分:可控硅件 |
(Electronic components. Semiconductor devices. Discrete devices and integrated circuits. Part 6 : thyristors.) |
| NF C96-007-1989 |
半導體器件.分立器件和集成電路.第7部分:二極管 |
(Semiconductor devices. Discrete devices and integrated circuits. Part 7 : bipolar transistors.) |
| NF C96-008-1985 |
半導體器件.分立器件和集成電路.第8部分:場效應晶體管 |
(Semiconductor devices. Discrete devices and integrated circuits. Part 8 : field-effect transistors.) |
| NF C96-012-2000 |
集成電路.存儲器件插腳配置 |
(Integrated circuits - Memory devices pin configurations.) |
| NF C96-013-3-2000 |
半導體裝置的機械標準化.第3部分:集成線路輪廓繪圖準備的一般規則 |
(Mechnical standardization of semiconductor devices - Part 3 : general rules for the preparation of outline drawings of integrated circuits.) |
| NF C96-013-4-2000 |
半導體器件的機械標準化.第4部分:半導體器件封裝外形的編碼系統和分類形式 |
(Mechanical standardization of semiconductor devices - Part 4 : coding system and classification into forms of package outlines for semiconductor device packages.) |
| NF C96-013-4/A1-2002 |
半導體器件的機械標準化.第4部分:半導體器件封裝外形圖類型的劃分和編碼系統 |
(Mechanical standardization of semiconductor devices - Part 4 : coding system and classification into forms of package outlines for semiconductor device packages.) |
| NF C96-013-4/A2-2003 |
半導體器件的機械標準化.第4部分:半導體器件封裝外形形狀的分類和編碼系統 |
(Mechanical standardization of semiconductor devices - Part 4 : coding system and classification into forms of package outlines for semiconductor device packages.) |
| NF C96-013-6-1-2002 |
半導體器件的機械標準化.第6-1部分:平面式安裝半導體器件外殼外形圖繪制的一般規則.海鷗翼式鉛終端的設計指 |
(Mechanical standardization of semiconductor devices - Part 6-1 : general rules for the preparation of outline drawings of surface mounted semiconductor device parkages - Design guide for gull-wing lea) |
| NF C96-013-6-12-2002 |
半導體器件的機械標準化.第6-12部分:表面安裝半導體器件封裝外形圖繪制的一般規則.矩形小節距柵極矩陣列的 |
(Mechanical standardization of semiconductor devices - Part 6-12 : general rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for fine-pitch g) |
| NF C96-013-6-2-2002 |
半導體器件的機械標準化.第6-2部分:繪制表面安裝半導體器件封裝外形圖的一般規則.1.5mm、1.27mm和1.00mm 樹 |
(Mechnical standardization of semiconductor devices - Part 6-2 : general rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for 1,50 mm, 1,27) |
| NF C96-013-6-3-2001 |
半導體裝置的機械標準化.第6-3部分:半導體裝置包裝的表面安裝的繪圖制備的一般規則.四方塊包裝件包裝尺寸的 |
(Mechnical standardization of semiconductor devices - Part 6-3 : general rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package d) |
| NF C96-013-6-4-2003 |
半導體器件的機械標準化.第6-4部分:繪制表面安裝半導體器件封裝外形圖的一般規則.焊球網格陣列(BGA)封裝尺 |
(Mechanical standardization of semiconductor devices - Part 6-4 : general rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package) |
| NF C96-013-6-5-2002 |
半導體器件的機械標準化.第6-5部分:表面安裝半導體器件外殼外形圖繪制的一般規則.小螺距刃片柵格排列的設計 |
(Mechanical standardization of semiconductor devices - Part 6-5 : general rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for fine-pitch ba) |
| NF C96-013-6-6-2002 |
半導體器件的機械標準化.第6-6部分:平面式安裝半導體器件外殼外形圖繪制的一般規則.小螺距刃片柵格排列的設 |
(Mechanical standardization of semiconductor devices - Part 6-6 : general rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for fine pitch la) |
| NF C96-013-6-8-2002 |
半導體器件的機械標準化.第6-8部分:表面安裝半導體器件封裝外形圖繪制的一般規則.玻璃密封的陶瓷四邊形扁平 |
(Mechanical standardization of semiconductor devices - Part 6-8 : general rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for glass sealed) |
| NF C96-016-1-2003 |
半導體器件.第16-1部分:微波集成電路.放大器 |
(Semiconductor devices - Part 16-1 : microwave integrated circuits - Amplifiers.) |
| NF C96-016-3-2003 |
半導體器件.第16-3部分:微波集成電路.變頻器 |
(Semiconductor devices - Part 16-3 : microwave integrated circuits - Frequency converters.) |
| NF C96-022-1-2003 |
半導體器件.機械和氣候試驗方法.第1部分:總則 |
(Semiconductor devices - Mechanical and climatic test methods - Part 1 : general.) |
| NF C96-022-10-2002 |
半導體器件.機械和氣候試驗方法.第10部分: 機械振動 |
(Semiconductor devices - Mechanical and climatic test methods - Part 10 : mechanical shock.) |
| NF C96-022-11-2002 |
半導體器件.機械和氣候試驗方法.第11部分: 溫度的急速變化.雙液電鍍槽法 |
(Semiconductor devices - Mechanical and climatic test methods - Part 11 : rapid change of temperature - Two-fluid-bath method.) |
| NF C96-022-12-2002 |
半導體器件.機械和氣候試驗方法.第12部分: 振動、可變頻率 |
(Semiconductor devices - Mechanical and climatic test methods - Part 12 : vibration, variable frequency.) |
| NF C96-022-13-2002 |
半導體器件.機械和氣候試驗方法.第13部分: 鹽性環境 |
(Semiconductor devices - Mechanical and climatic test methods - Part 13 : salt atmosphere.) |
| NF C96-022-15-2003 |
半導體器件.機械和氣候試驗方法.第15部分:通孔安裝設備的耐釬焊溫度 |
(Semiconductor devices - Mechanical and climatic test methods - Part 15 : resistance to soldering temperature for through-hole mounted devices.) |
| NF C96-022-16-2003 |
半導體器件.機械和氣候試驗方法.第16部分:粒子碰撞噪聲探測(PIND) |
(Semiconductor devices - Mechanical and climatic test methods - Part 16 : particle impact noise dectection (PIND).) |
| NF C96-022-17-2003 |
半導體器件.機械和氣候試驗方法.第17部分:中子輻照 |
(Semiconductor devices - Mechanical and climatic test methods - Part 17 : neutron irradiation.) |
| NF C96-022-18-2003 |
半導體器件.機械和氣候試驗方法.第18部分:電離輻射(總劑量) |
(Semiconductor devices - Mechanical and climatic test methods - Part 18 : ionizing radiation (total dose).) |
| NF C96-022-19-2003 |
半導體器件.機械和氣候試驗方法.第19部分:模剪切強度試驗 |
(Semiconductor devices - Mechanical and climatic test methods - Part 19 : die shear strength.) |
| NF C96-022-2-2002 |
半導體器件.機械和氣候試驗方法.第2部分:低氣壓 |
(Semiconductor devices - Mechanical and climatic test methods - Part 2 : low air pressure.) |
| NF C96-022-20-2003 |
半導體器件.機械和氣候試驗方法.第20部分:塑料密封的SMDs抗?jié)駳夂外F焊熱的綜合影響 |
(Semiconductor devices - Mechanical and climatic test methods - Part 20 : resistance of plastic-encapsulated SMDs to the combined effect of moisture and soldering heat.) |
| NF C96-022-22-2003 |
半導體器件.機械和氣候試驗方法.第22部分:粘接強度 |
(Semiconductor devices - Mechanical and climatic test methods - Part 22 : bond strength.) |
| NF C96-022-3-2002 |
半導體器件.機械和氣候試驗方法.第3部分:外觀檢驗 |
(Semiconductor devices - Mechanical and climatic test methods - Part 3 : external visual examination.) |
| NF C96-022-31-2003 |
半導體器件.機械和氣候試驗方法.第31部分:塑料密封器件的易燃性(內部引起的) |
(Semiconductor devices - Mechanical and climatic test methods - Part 31 : flammability of plastic-encapsulated devices (internally induced).) |
| NF C96-022-36-2003 |
半導體器件.機械和氣候試驗方法.第36部分:穩態加速 |
(Semiconductor devices - Mechanical and climatic test methods - Part 36 : acceleration steady state.) |
| NF C96-022-4-2002 |
半導體器件.機械和氣候試驗方法.第4部分:濕熱、穩態、高加速應力試驗 |
(Semiconductor devices - Mechanical and climatic test methods - Part 4 : damp heat, steady state, highly accelerated stress test (HAST).) |
| NF C96-022-5-2003 |
半導體器件.機械和氣候試驗方法.第5部分:穩態溫度濕度偏差耐久性試驗 |
(Semiconductor devices - Mechanical and climatic test methods - Part 5 : steady-state temperature humidity bias life test.) |
| NF C96-022-6-2002 |
半導體器件.機械和氣候試驗方法.第6部分:高溫下儲存 |
(Semiconductor devices - Mechanical and climatic test methods - Part 6 : storage at high temperature.) |
| NF C96-022-7-2002 |
半導體器件.機械和氣候試驗方法.第7部分:其他殘余氣體的分析和內部水分含量的測量 |
(Semiconductor devices - Mechanical and climatic test methods - Part 7 : internal moisture content measurement and the analysis of other residual gases.) |
| NF C96-022-9-2002 |
半導體器件.機械和氣候試驗方法.第9部分:標記的永久性 |
(Semiconductor devices - Mechanical and climatic test methods - Part 9 : permamence of marking.) |
| NF C96-031-1-1990 |
IEC 821 VME 總線.第1部分:1～4字節數據微處理機系統總線 |
(IEC bus 821 VME. Microprocessor system bus for 1 to 4 byte data. Part 1.) |
| NF C96-031-2-1990 |
IEC 821 VME 總線.第2部分:1～4字節數據微處理機系統總線 |
(IEC bus 821 VME. Microprocessor system bus for 1 to 4 byte data. Part 2.) |
| NF C96-032-1992 |
IEC 822 VSB.IEC 821 VME總線的平行子系統總線 |
(IEC 822 VSB. Parallel sub-system bus of the IEC 821 VMEBUS.) |
| NF C96-033-1992 |
有關微處理機的術語 |
(Terminology related to microprocessors.) |
| NF C96-036-1992 |
微處理機系統用二進制浮點運算法 |
(Binary floating-point arithmetic for microprocessor systems.) |
| NF C96-037-2000 |
集成電路.生產線驗收應用指南 |
(Integrated circuits - Manufacturing line approval application guideline.) |
| NF C96-045-1992 |
半導體器件.集成電路.第11部分:半導體集成電路(混合電路除外)的分規范 |
(Semiconductors devices. Integrated circuits. Part 11 : sectional specification for semiconducteur integrated circuits excluding hybrid circuits.) |
| NF C96-1111-1980 |
NF C96-111-80的補充件1 |
() |
| NF C96-1121-1981 |
NF C96-112-80的補充件1 |
() |
| NF C96-200-1983 |
微型結構.邏輯微型結構.一般規定 |
(Microcircuits. Digital microcircuits. General requirements.) |
| NF C96-251-1983 |
微型結構.邏輯微型結構.編程序存儲器 |
(MICROCIRCUITS. DIGITAL MICROCIRCUITS. FUSIBLE LINK PROM MEMORIES.) |
| NF C96-260-1-2002 |
集成電路.150kHz-1GHz電磁輻射的測量.第1部分:一般條件和定義 |
(Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 1 : general conditions and definitions.) |
| NF C96-260-4-2002 |
集成電路.150kHz-1GHz電磁輻射的測量.第4部分:傳導輻射的測量.1 ohm/150 ohm直接耦合法 |
(Integrated circuits - Measurement of Electromagnetic Emissions, 150 kHz - 1 GHz - Part 4 : measurement of conducted emission - 1 ohm/150 ohm direct coupling method.) |
| NF C96-260-5-2003 |
集成電路.150kHz-1GHz電磁輻射的測量.第5部分:工作臺法拉第筒法測量感應輻射 |
(Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Partie 5 : measurement of conducted emissions, Workbench faraday cage method.) |
| NF C96-260-6-2003 |
集成電路.150kHz-1GHz電磁輻射的測量.第6部分:傳導輻射測量.磁探測器法 |
(Integrated circuits - Measurement of electromagnetic emissions, 150 kHz - 1 GHz - Part 6 : measurement of conducted emissions - Magnetic probe method.) |
| NF C96-315-1987 |
微型結構.超高頻微電子學.超高頻微電子學及其同樣規定的有關裝置.衰減器和負載 |
(MICROWAVE MICROELECTRONICS. ATTENUATORS AND LOADS.) |
| NF C96-316-1988 |
微波裝置.環行器.絕緣子 |
(MICROWAVE DEVICES. CIRCULATORS. ISOLATORS.) |
| NF C96-317-1988 |
微波裝置.同軸和波導繼電器和開關 |
(MICROWAVE DEVICES. ELECTROMECHANICAL COAXIAL AND IN WAVEGUIDES RELAYS AND SWITCHES.) |
| NF C96-318-1991 |
超高頻裝置.有源延遲線 |
(MICROWAVE DEVICES. ACTIVE DELAY LINES.) |
| NF C96-411-1984 |
混合微型結構.薄膜電阻集成電路（ＣＩＲ）.一般規定 |
(Hybrid microcircuits. Film deposit resistive integrated circuits. General requirements.) |
| NF C96-627-1-3-2000 |
波導型電介諧振器.第1-3部分:一般信息和試驗條件.在微波頻率內電介諧振器材料的復合相關可允許性的測量方法 |
(Waveguide type dielectric resonators - Part 1-3 : general information and test conditions - Measurement method of complex relative permittivity for dielectric resonator materials at microwave frequenc) |
| NF C96-628-1-2000 |
頻率控制和選則用表面安裝的壓電器件.標準外形和終端引線的連接.第1部分:塑料模壓外殼外形 |
(Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 1 : plastic moulded enclosure outlines.) |
| NF C96-832-1981 |
半導體.超高頻二極管.肖特基二極管.一般規定 |
(SEMICONDUCTORS. MICROWAVE DIODES. SCHOTTKY DIODES. GENERAL REQUIREMENTS.) |
| NF C97-001-1-2000 |
數字音頻接口.第1部分:總則 |
(Digital audio interface - Part 1 : general.) |
| NF C97-001-3-2000 |
數字音頻接口.第3部分:消費者應用 |
(Digital audio interface - Part 3 : consumer applications.) |
| NF C97-001-4-2000 |
數字音頻接口.第4部分:專業應用 |
(Digital audio interface - Part 4 : professional applications.) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com