標準號 |
中文名稱 |
英文名稱 |
| NF S80-501-1995 |
鐘表業.漸開線齒輪或擺輪校正.最佳模數 |
(Horology. Corrected cylcloidal or involute toothing gears. Preferred modules.) |
| NF S80-504-1995 |
鐘表業.漸開線齒輪或擺輪校正.齒輪對的輪齒 |
(Horology. Corrected cycloidal or involute toothing gears. Toothing for coupled gears.) |
| NF S80-505-1995 |
鐘表業.漸開線齒輪或擺輪校正.齒輪組的輪齒 |
(Horology. Corrected cycloidal or involute toothing gears. Toothing for trains of gears.) |
| NF S80-525-1995 |
鐘表業.校正擺輪.齒輪增速裝置.基礎型材.主動輪和從動輪 |
(Horology. Corrected cycloidal toothing gears. Step up gears. Basic profiles. Driving gear and driven gear.) |
| NF S80-526-1995 |
鐘表業.校正擺輪.增速或減速齒輪 |
(Horology. Corrected cycloidal toothing gears. Step up or reducting gears.) |
| NF S80-541-1995 |
鐘表業.校正擺輪.簧盒中心齒輪 |
(Horology. Corrected cycloidal toothing gears. Spring-barrel centre gears.) |
| NF S80-560-1995 |
鐘表業.漸開線齒輪.詞匯 |
(Horology. Involute toothing gears. Vocabulary.) |
| NF S80-565-1995 |
鐘表業.漸開線齒輪.標準齒條 |
(Horology. Involute toothing gears. Basic racks.) |
| NF S80-566-1995 |
鐘表業.漸開線齒輪.標準輪齒 |
(Horology. Involute toothing gears. Normal toothing.) |
| NF S80-567-1995 |
鐘表業.漸開線齒輪.中心距離無變化的修正的齒形插口 |
(Horology. Reducing involute toothing gears. Corrected toothing without variation of centre distance.) |
| NF S80-568-1995 |
鐘表業.漸開線減速齒輪.有軸距變化的校正齒輪 |
(Horology. Reducing involute toothing gears. Corrected toothing with variation of centre distance.) |
| NF S80-569-1995 |
鐘表業.漸開線減速齒輪.偏心距模數為0.5的校正輪齒 |
(Horology. Reducing involute toothing gears. Toothing corrected by shift to 0,5 module.) |
| NF S80-701-1995 |
鐘表業.鐘表鋼鑄件的硬度 |
(Horology. Hardness of steel parts of the watch.) |
| NF S80-771-1973 |
鐘表業.手表殼和鐘表零件合金鍍層的一般特性 |
(Horology. General requirements for gold alloy coverings on watch cases and horological components.) |
| NF S80-772-1992 |
鐘表制造.鍍層的試驗方法 |
(HOROLOGY. GOLD-PLATED WATCH-CASES. TEST METHODS FOR COATINGS.) |
| NF S80-801-1-1995 |
鐘表業.技術定義.第1部分:科學技術定義.基本術語 |
(Horology. Technical definitions. Part 1 : technical and scientific definitions. Basic terms.) |
| NF S80-801-2-2003 |
鐘表詞匯.第2部分:商業技術定義 |
(Horological vocabulary - Part 2 : technico and commercial definitions.) |
| NF S81-505-1996 |
計時儀表.檢驗方位的標識 |
(Horology. Timekeeping instruments. Symbolization of control positions.) |
| NF S81-513-1994 |
鐘表業.檢驗手表質量的實用方法 |
(Horology. Practical method for the inspection of the quality of jewelled pallet for watches.) |
| NF S81-514-1998 |
鐘表業.功能和非功能珠寶 |
(Horology. Functional and non-functional jewels.) |
| NF S81-516-1996 |
鐘表業.手表記時計 |
(Horology. Wrist watches chronometers.) |
| NF S81-520-1-1996 |
鐘表業.防磁表.第1部分:一般用途 |
(Horology. Antimagnetic watches. Part 1 : common use.) |
| NF S81-520-2003 |
鐘表學.防磁表 |
(Horology - Magnetic resistant watches.) |
| NF S81-525-2000 |
鐘表業.防震手表 |
(Horology - Schock-resistant watches.) |
| NF S81-530-1996 |
鐘表業.走動控制規范 |
(Horology. Specifications for movement blank control.) |
| NF S81-551-1991 |
鐘表業.石英鐘走時質量的檢驗方法 |
(HOROLOGY. METHOD FOR THE INSPECTION OF THE QUALITY OF MOVEMENTS FOR QUARTZ WATCHES.) |
| NF S82-501-1995 |
鐘表業.表的圓柱體發條.質量分類 |
(Horology. Watch spring-barrel springs. Quality classes.) |
| NF S83-201-1995 |
鐘表業.錨式擒縱輪.輪、叉、雙圓盤 |
(Horology. Pallet escapements. Wheels, pallets, trays.) |
| NF S83-202-1995 |
鐘表業.錨式擒縱輪.機心平面 |
(Horology. Pallet escapements. Ebauche uprighting.) |
| NF S83-203-1995 |
鐘表業.錨式擒縱輪.機件相對高度 |
(Horology. Pallet escapements. Relative height of components.) |
| NF S83-261-1995 |
鐘表業.吊環螺栓 |
(Horology. Studs.) |
| NF S83-271-1995 |
鐘表業.快慢針部件 |
(Horology. Index-assembly.) |
| NF S83-275-1995 |
鐘表業.擺托與快慢針 |
(Horology. Stud-support index.) |
| NF S83-278-1995 |
鐘表業.游絲夾 |
(Horology. Index keys.) |
| NF S83-300-1995 |
鐘表業.游絲 |
(Horology. Balance springs.) |
| NF S84-050-1971 |
鐘表業.指針.與機心的配合 |
(HOROLOGY. HANDS. ATTACHMENT TO THE EBAUCHE.) |
| NF S84-060-1996 |
鐘表業.表的中心軸.與小齒輪的連接尺寸 |
(Horology. Center staff for watches. Fitting dimensions with cannon pinion.) |
| NF S84-201-1996 |
鐘表業.手表的上條柄軸 |
(Horology. Winding stems for wrist watches.) |
| NF S84-801-1998 |
鐘表業.輪的形狀和尺寸 |
(Horology. Wheel work shape and dimensions.) |
| NF S85-200-1996 |
鐘表亞.鐘表鉆石.術語和符號 |
(Horology. Jewels for watches and clocks. Terminology and symbols.) |
| NF S85-201-1998 |
鐘表業.珠寶.質量規范 |
(Horology. Jewels. Quality specifications.) |
| NF S85-202-1996 |
鐘表亞.鐘表鉆石.測量方法 |
(Horology. Jewels for watches and clocks. Measurement methods.) |
| NF S85-211-1998 |
鐘表業.圓形量規用珠寶尺寸 |
(Horology. Dimensions of jewels for round gauges.) |
| NF S85-212-1998 |
鐘表業.定型量規用珠寶的尺寸 |
(Horology. Dimensions of jewels for shape-gauges.) |
| NF S85-213-1996 |
鐘表業.擺鉆石 |
(Horology. Balances jewels.) |
| NF S85-214-1998 |
鐘表業.平和半平珠寶 |
(Horology. Flat and semi-flat jewels.) |
| NF S85-215-1996 |
鐘表業.鐘表鉆石.孔長度 |
(Horology. Jewels. Length of holes.) |
| NF S85-216-1996 |
鐘表業.長秒針滾柱尺寸 |
(Horology. Dimensions of rollers for sweep seconds.) |
| NF S85-230-1996 |
鐘表業.帽鉆石 |
(Horology. Cap jewels.) |
| NF S86-021-1970 |
鐘表業.指針.與表盤的配合 |
(HOROLOGY. HANDS. ATTACHMENT TO THE WATCH DIAL.) |
| NF S86-300-1996 |
鐘表業.表盤規范 |
(Horology. Specification for wrist watch dials.) |
| NF S86-305-1996 |
計時儀表用的輻射發光.時間測量儀表的輻射發光.規范 |
(Horology. Radioluminescent time measuring instruments.) |
| NF S86-306-2003 |
時間測量儀表.輻射發光鍍層檢驗條件 |
(Timekeeping instruments - Conditions for carrying out checks on radioluminescent deposits.) |
| NF S86-321-1996 |
鐘表業.手表圓盤 |
(Horology. Round dials for watches.) |
| NF S86-400-1994 |
鐘表業.表玻璃.表玻璃的尺寸及公差和鑒定用試驗方法 |
(HORLOGERY. WATCH-GLASSES. DIMENSIONS AND TOLERANCES OF WATCH-GLASSES AND TEST METHODS FOR THEIR VERIFICATION.) |
| NF S86-501-2002 |
計時裝置.手表外殼.非彈簧棒型的固定尺寸 |
(Timekeeping instrument - Wristwatch-cases - Fixing dimensions of non-spring-bar types.) |
| NF S86-600-1992 |
鐘表制造學.表殼規范 |
(Horology. Specifications for watch cases.) |
| NF S86-603-1983 |
鐘表業.表帶質量檢驗技術規范 |
(Horology. Specification for the inspection of the quality of watch straps.) |
| NF S86-604-1996 |
鐘表業.表金手鐲特點 |
(HOROLOGY. CHARACTERIZATION OF METALLIC BRACELETS FOR WATCHES.) |
| NF S86-610-1996 |
鐘表業.非鐵合金鍍鉻表鑒定 |
(Horology. Verification of chromium plated watch cases made in non ferrous alloys.) |
| NF S86-621-2000 |
鐘表業.帶圓孔的兩件殼體用嵌盒 |
(Horology - Casing for two-piece case with round aperture.) |
| NF S86-622-1977 |
鐘表業.電子表.帶按鈕殼體的連接尺寸 |
(HOROLOGY. ELECTRONIC WATCHES. DIMENSIONS FOR CONNECTING THE CASE AND THE PUSH-BUTTON.) |
| NF S86-631-1992 |
鐘表制造學.表殼用套管.設計和尺寸 |
(Horology. Cases tubes for writwatches. Design and dimensions.) |
| NF S86-635-1977 |
鐘表業.電子表.按鈕的連接尺寸 |
(HOROLOGY. ELECTRONIC WATCHES. DIMENSIONS FOR THE ATTACHMENT OF PUSH-BUTTONS.) |
| NF S86-641-1999 |
鐘表業.帶螺紋邊的圓孔表盤嵌在表盤環里的兩半式表殼殼體 |
(Horology. Case bodies (middle) for two-piece watch cases with screwed back, round opening, dial resting on dial ring.) |
| NF S86-681-1999 |
鐘表業.符合NFS86-641標準的突肩螺紋邊殼體 |
(Horology - Screw-fastened back for shouldered middle in conformity with standard NF S 86-641.) |
| NF S86-696-1996 |
鐘表業.帶螺紋底的表架封閉口 |
(Horology. Closing notches for watch frames with screwed bottom.) |
| NF S86-860-1998 |
鐘表業.帶簧 |
(Horology. Spring pins.) |
| NF S86-870-1998 |
鐘表業.條扣 |
(Horology. Strap buckle.) |
| NF S87-010-1996 |
大型鐘表.表針調節器 |
(Hall clocks. Hands adjustment.) |
| NF S87-150-1996 |
走廊鐘表.中心固定螺孔 |
(Hall clocks. Central fixing screw.) |
| NF S87-210-1996 |
走廊鐘表.凸、平和圓形礦物玻璃鐘安裝尺寸 |
(Hall clocks. Clocks-fitting dimensions for convex and flat round mineral glasses.) |
| NF S87-500-1987 |
鐘表業.計時.以雙繞線的編碼信號從母鐘到子鐘的時間傳送.要求 |
(HOROLOGY. TIME TRANSMISSION FROM MASTERCLOCK TO SECONDARY CLOCKS BY CODED SIGNALS ON DOUBLE-WOUND. REQUIREMENTS.) |
| NF S90-010-1987 |
外科醫療器械.可重復使用的全玻璃或金屬和玻璃醫療注射器.第1部分:尺寸 |
(Medico-surgical equipment. Reusable all-glass or metal-and-glass syringes for medical use. Part 1 : dimensions.) |
| NF S90-014-1981 |
外科醫療器械.可多次使用胰島素玻璃注射器 |
(Medical and surgical equipment. Re-useable glass insulin syringes.) |
| NF S90-033-1986 |
外科醫療器械.多次用橡膠避孕套 |
(MEDICO-SURGICAL EQUIPMENT. REUSABLE RUBBER CONTRACEPTIVE DIAPHRAGMS.) |
| NF S90-045-1985 |
外科醫療器械.制藥或配藥用鋁帽.驗收檢驗 |
(MEDICO-SURGICAL EQUIPMENT. ALUMINIUM CAPS FOR PHARMACEUTICAL USE. QUALITY ACCEPTANCE.) |
| NF S90-091-1983 |
藥用安瓿.玻璃管尺寸 |
(Pharmaceutical ampoules. Dimensions of glass tubes.) |
| NF S90-092-1983 |
藥用安瓿.兩點式安瓿 |
(Pharmaceutical ampoules. Double. Pointed ampoules.) |
| NF S90-094-1983 |
藥用安瓿.交貨檢驗方式 |
(PHARMACEUTICAL AMPOULES. METHODS FOR INSPECTION OF DELIVERIES.) |
| NF S90-110-1996 |
便攜式氣瓶.醫用指針指示馬蹄型閥門排出口接頭 |
(Transportable gas cylinders. Pin-index, yoke-type valve outlet connections for medical use.) |
| NF S90-110/A1-2001 |
可移動的燃氣瓶.醫用定位銷轉位的卡箍式閥出口連接 |
(Transportable gas cylinders - Pin-index, yoke-type valve outlet connections for medical use.) |
| NF S90-133-1989 |
外科醫療器械.外科手術用的輻射熱保溫箱.規范 |
(MEDICO-SURGICAL EQUIPMENT. RADIANT INCUBATORS. SPECIFICATIONS.) |
| NF S90-191-1986 |
外科醫療器械.輸液用玻璃瓶.幾何特性及標記 |
(MEDICO-SURGICAL EQUIPMENT. GLASS BOTTLES FOR PERFUSION. GEOMETRICAL CHARACTERISTICS AND MARKING.) |
| NF S90-201-1990 |
外科醫療器械.輸血必需 |
(Medico-surgical equipment. Transfusion sets.) |
| NF S90-202-1990 |
外科醫療器械.輸液必需 |
(Medico-surgical equipment . Infusion sets.) |
| NF S90-203-1986 |
外科醫療器械.輸血和輸液傳送、加長和其它附屬裝置 |
(MEDICO-SURGICAL EQUIPMENT. TRANSFER DEVICES,EXTENSION PIECES AND OTHER ANCILLARY EQUIPMENT FOR TRANSFUSION AND INFUSION.) |
| NF S90-221-1986 |
外科醫療器械.輸血器械.500ml玻璃瓶 |
(Medico-surgical equipment. Transfusion equipment. 500 ml glass bottles.) |
| NF S90-222-1986 |
外科醫療器械.輸血器械.250ml玻璃瓶 |
(Medico-surgical equipment. Transfusion equipment. 250 ml glass bottles.) |
| NF S90-223-1986 |
外科醫藥器械.輸血器械.1000ml玻璃瓶 |
(Medico-surgical equipment. Transfusion equipment. 1000 ml glass bottles.) |
| NF S90-230-1978 |
外科醫療器械.輸血器械.血及其制品用軟塑料簡式囊的尺寸和物理性能 |
(MEDICAL AND SURGICAL EQUIPMENT. TRANSFUSION APPARATUS FOR MEDICAL USE. PHYSICAL AND DIMENSIONAL PROPERTIES OF SIMPLE FLEXIBLE PLASTIC BAGS FOR BLOOD AND ITS DERIVATIVES.) |
| NF S90-231-1978 |
外科醫療器械.醫用輸血器械.血及其制品用軟塑料簡式囊的尺寸和物理特性 |
(MEDICAL AND SURGICAL EQUIPMENT. TRANSFUSION APPARATUS FOR MEDICAL USE. PHYSICAL AND DIMENSIONAL PROPERTIES OF MULTIPLE FLEXIBLE PLASTIC BAGS FOR BLOOD AND ITS DERIVATES.) |
| NF S90-240-1990 |
外科醫療器械.生物抽樣用一次性器皿.真空器皿 |
(Medico-surgical equipment. Single-use containers for biological samples. Evacuated tubes.) |
| NF S90-251-1986 |
外科醫療器械.推力注射器.功能特性 |
(MEDICO-SURGICAL EQUIPMENT. SYRINGE PUMPS. OPERATING CHARACTERISTICS.) |
| NF S90-304-1989 |
外科醫療器材.血液透析儀器.功能的特性 |
(MEDICO-SURGICAL EQUIPMENT. HAEMODIALYSIS EQUIPMENT. OPERATING DATA.) |
| NF S90-305-1986 |
外科醫療器械.活膜滲析分布監測器.功能特性 |
(MEDICO-SURGICAL EQUIPMENT. PERITONEAL DIALYSIS CYCLER. FUNCTIONAL APTITUDE.) |
| NF S90-307-1990 |
外科醫療器械.細胞和血漿離心分離器(監視器和一次性用品).工作性能 |
(MEDICO-SURGICAL EQUIPMENT. CENTRIFUGE-TYPE BLOOD CELL AND PLASMA SEPARATORS (MONITORS AND SINGLE-USE KITS) SUITABILITY FOR USE.) |
| NF S90-312-1984 |
外科醫療器械.醫院用病床 |
(BEDS FOR HOSPITAL USE.) |
| NF S90-316-1987 |
外科醫療器械.手術臺 |
(MEDICO-SURGICAL EQUIPMENT. OPERATING TABLES.) |
| NF S90-321-1986 |
外科醫療器械.蒸氣消毒用包、套、軟片和卷筒尺寸 |
(MEDICO-SURGICAL EQUIPMENT. BAGS,TUBE PACKINGS,SHEETS AND TOILS FOR STEAM-STERILIZATION. DIMENSIONS.) |
| NF S90-325-1989 |
外科醫療器械.蒸汽消毒器具 |
(MEDICAL SURGICAL EQUIPMENT. STEAM DISINFECTING EQUIPMENT.) |
| NF S90-351-2003 |
醫療保健設施.清潔室和相關受控環境.空氣中污物的控制要求 |
(Health care establishments - Cleanrooms and associated controlled environments - Requirements for the control of airbone contamination.) |
| NF S90-361-1990 |
外科醫療器械.釘子.股骨最高端用的不銹鋼片 |
(MEDICO-SURGICAL EQUIPMENT. ROUGH-SURFACED STAINLESS STEEL NAIL PLATES FOR THE UPPER END OF THE THIGHBONE. MATERIALS AND DIMENSIONS.) |
| NF S90-408-1981 |
外科醫療器械.外科植入物.氧化鋁陶瓷制品 |
(MEDICAL AND SURGICAL EQUIPMENT. IMPLANTS FOR SURGERY. CERAMIC MATERIALS BASED ON ALUMINA.) |
| NF S90-410-1988 |
外科醫療器械.外科植入物.接骨板.不對稱螺紋和可變底座（球形）板 |
MEDICO-SURGICAL EQUIPMENT. IMPLANTS FOR SURGERY. GEOMETRY OF HOLES AND SLOTS CORRESPONDING TO SCREWS WITH ASYMMETRICAL THREAD AND SPHERICAL UNDER-SURFACES IN THE EQUIPMENT OF OSTEOSYNTHESIS. |
| NF S90-411-1988 |
外科醫療器械.外科植入物.不對稱螺紋和球形底座的接骨用金屬螺釘.尺寸 |
(MEDICO-SURGICAL EQUIPMENT. IMPLANTS FOR SURGERY. OSTEOSYNTHESIS METAL SCREWS WITH ASYMMETRICAL THREAD AND SPHERICAL UNDER-SURFACE. DIMENSIONS.) |
| NF S90-414-1988 |
外科醫療器械.外科植入物.不對稱螺紋和球形底座接骨用不銹鋼螺絲.機械性能和試驗 |
(MEDICO-SURGICAL EQUIPMENT. IMPLANTS FOR SURGERY. STAINLESS STEEL OSTEOSYNTHESIS SCREW WITH ASYMMETRICAL THREAD AND SPHERICAL FITTING. MECHANICAL REQUIREMENTS AND TESTING.) |
| NF S90-416-1987 |
外科植入物.脊椎節固定系統.脊椎釘.尺寸 |
(Medico-surgical equipment. Implants for surgery. Intramedullary nailing systems. Part 2 : medullary pins.) |
| NF S90-420-1986 |
外科醫療器械.外科植入物.骨髓腔內插釘術系統.第1部分:首蓿葉式或V型剖面的骨髓腔內釘 |
(Medico-surgical equipment. Implants for surgery. Intramedullary nailing systems. Part 1 : intramedullary nails with cloverleaf or V-shaped cross-section.) |
| NF S90-421-1989 |
外科植入物.接骨用金屬螺釘.尺寸 |
(Implants for surgery. Metal bone screws with conical under-surfaces. Dimensions.) |
| NF S90-422-1989 |
外科植入物.接骨用金屬板.圓錐形螺絲用的鋁孔和擴孔 |
(IMPLANTS FOR SURGERY. METAL BONE PLATES. HOLES AND SLOTS CORRESPONDING TO SCREWS WITH CONICAL UNDER-SURFACE.) |
| NF S90-425-1989 |
外科植入物.矯形外科用的附件接頭.一般規范 |
(IMPLANTS FOR SURGERY. STAPLES WITH PARALLEL LEGS FOR ORTHOPAEDIC USE. GENERAL REQUIREMENTS.) |
| NF S90-426-1988 |
外科醫療器械.外科植入物.不銹鋼粗糙面骨干板.尺寸和表面特性 |
(MEDICO-SURGICAL EQUIPMENT. IMPLANTS FOR SURGERY. ROUGH SURFACE DIAPHYSIS PLATES MADE OF STAINLESS STEEL. DIMENSIONAL AND SURFACE CHARACTERISTICS.) |
| NF S90-427-1990 |
外科醫療器械.脊椎用接骨器材.不銹鋼制或鈷基合金制脊椎板.A系統.尺寸與幾何形狀 |
(MEDICO-SURGICAL EQUIPMENT. OSTEOSYNTHESIS EQUIPMENT FOR THE RACHIS. FORGED STAINLESS STELL OR COBALT ALLOY RACHIS PLATES. SYSTEM A. DIMENSIONS AND GEOMETRY.) |
| NF S90-433-1986 |
外科醫療器械.矯形外科設備.傳動連接.第2部分:十字形和一字形旋具 |
(Medico-surgical equipment. Orthopaedic instruments. Drive connections. Part 2 : screwdrivers for slotted, for cruciform and for recessed ned.) |
| NF S90-437-1989 |
外科植入物.矯形外科植物的維護和處理 |
(IMPLANTS FOR SURGERY. GUIDANCE ON CARE AND HANDLING OF ORTHOPAEDIC IMPLANTS.) |
| NF S90-443-1989 |
外科醫療器械.外科植入物.嵌入胯骨中的人造大腿部件.嵌合物頂端部分和陽部分的規范 |
(MEDICO-SURGICAL EQUIPMENT. IMPLANTS FOR SURGERY. FEMORAL COMPONENTS OF HIP PROSTHESES WITH DETACHABLE HEAD. REQUIREMENTS FOR THE HEAD AND THE SPIGOT.) |
| NF S90-444-1987 |
外科醫療器械.外科植入物.局部和全部髖關節修復術.第2部分: 由金屬和塑料材料制成的關節面 |
(MEDICO-SURGICAL EQUIPMENT. IMPLANTS FOR SURGERY. PARTIAL AND TOTAL HIP JOINT PROSTHESES. PART 2 : BEARING SURFACES MADE OF METALLIC AND PLASTICS MATERIALS.) |
| NF S90-445-1985 |
外科醫療器械.骨科關節假體.基本規范 |
(MEDICO-SURGICAL EQUIPMENT. IMPLANTS FOR SURGERY. ORTHOPAEDIC JOINT PROSTHESES. BASIC REQUIREMENTS.) |
| NF S90-446-1985 |
外科醫療器械.膝關節全體和部分假肢.第1部分：分類、定義和尺寸名稱 |
(MEDICO-SURGICAL EQUIPMENT. IMPLANTS FOR SURGERY. PARTIAL AND TOTAL KNEE JOINT PROSTHESES. PART 1 : CLASSIFICATION,DEFINITIONS AND DESIGNATION OF DIMENSIONS.) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com