標準號 |
中文名稱 |
英文名稱 |
| ANSI/NFPA 90A-2002 |
空氣調節和通風系統的安裝 |
(Installation of Air Conditioning and Ventilating Systems ) |
| ANSI/NFPA 90B-2002 |
熱空氣加熱器和空調系統的安裝 |
(Installation of Warm Air Heating and Air Conditioning Systems ) |
| ANSI/NFPA 90B-2006 |
熱空氣加熱器和空調系統的安裝標準 |
|
| ANSI/NFPA 91-2004 |
物料空運的排氣系統 |
|
| ANSI/NFPA 914-1994 |
古建筑的修復和適當?shù)刂匦率褂?/td>
| Rehabilitation and Adaptive Reuse of Historic Structures |
| ANSI/NFPA 921-2004 |
火災的調查報告 |
|
| ANSI/NFPA 92A-1996 |
煙控制系統 |
Smoke Control Systems |
| ANSI/NFPA 92A-2006 |
利用屏蔽和壓差的煙控系統標準 |
|
| ANSI/NFPA 92B-1995 |
房?jī)?nèi)、有頂走廊和大范圍煙塵控制系統 |
Smoke Control Systems in Atria, Covered Malls, and Large Areas |
| ANSI/NFPA 92B-2005 |
林蔭道、前廳和大空間內煙霧控制系統標準 |
|
| ANSI/NFPA 96-2001 |
商用烹調操作的通風控制和防火 |
Ventilation Control and Fire Protection of Commercial Cooking Operations |
| ANSI/NFPA 96-2004 |
商用烹飪裝置的排氣控制與防火 |
|
| ANSI/NFPA 97-1996 |
煙囪、通風口及生熱器具的術語匯編 |
Glossary of Terms Relating to Chimneys, Vents, and Heat-Producing Appliances |
| ANSI/NFPA 97-2003 |
煙囪、通風口及放熱設備的術語詞匯 |
(Glossary of Terms Relating to Chimneys, Vents, and Heat-Producing Appliances ) |
| ANSI/NFPA 99-2002 |
保健設施 |
Health Care Facilities |
| ANSI/NFPA 99-2005 |
保健設施 |
|
| ANSI/NFPA 99B-2002 |
低氣壓設備 |
Hypobaric Facilities |
| ANSI/NFPA 99B-2005 |
低氣壓設施 |
|
| ANSI/NFSA K 93.2-1984 |
含多于1%氨的氮肥溶液的貯存和處理 |
Nitrogen Fertilizer Solutions Containing More Than 1% Free Ammonia, Storage and Handling of |
| ANSI/NFSA K 93.3-1984 |
化肥工業中的磷酸的貯存和處理 |
Phosphoric Acid in the Fertilizer Industry, Storage and Handling of |
| IEEE 802.16 Conformance01-2003 |
IEEE 802.16的一致性標準.第1部分:協議實現一致性聲明(PICS).10-66GHz MAN-SC |
(Standard for conformance to IEEE 802.16 - Part 1: Protocol Implementation Conformance Statement (PICS); Proforma for 10-66 GHz WirelessMAN-SC) |
| International Classification f |
國際標準分類法(ICS) |
() |
| NF A00-001-1991 |
金屬產品.檢驗文獻的類型 |
(Metallic products - Types of inspection documents.) |
| NF A00-001/A1-1997 |
NF EN 10204 1991的修改件1 |
() |
| NF A00-0011-1997 |
金屬產品.檢驗文獻的類型.(歐洲標準 EN 10204).修改件1 |
() |
| NF A00-100-1993 |
鋼及鋼制品的一般交貨技術要求 |
(General technical delivery requirements for steel and steel products.) |
| NF A00-500-1-1997 |
鑄造.交貨技術條件.第一部分:總論 |
(Founding. Technical conditions of delivery. Part 1 : general.) |
| NF A00-500-3-1997 |
鑄造.交貨技術條件.第3部分:鑄鐵的補充要求 |
(Founding. Technical conditions of delivery. Part 3 : additional requirements for iron castings.) |
| NF A00-500-5-1997 |
鑄造.交貨技術條件.第5部分:鎂合金鑄件的附加要求 |
(FOUNDING. TECHNICAL CONDITIONS OF DELIVERY. PART 5 : ADDITIONAL REQUIREMENTS FOR MAGNESIUM ALLOY CASTINGS. (EUROPEAN STANDARD EN 1559-5).) |
| NF A00-500-6-1999 |
鑄造.交貨技術條件.第6部分:鋅合金鑄件的附加要求 |
(FOUNDING. TECHNICAL CONDITIONS OF DELIVERY. PART 6 : ADDITIONAL REQUIREMENTS FOR ZINC ALLOY CASTINGS. (EUROPEAN STANDARD EN 1559-6).) |
| NF A00-501-1-1990 |
鑄件.訂貨和供應的一般技術條件.第1部分:鋼鑄件 |
(FOUNDRY PRODUCTS. GENERAL TECHNICAL CONDITIONS FOR ORDERING AND SUPPLYING. PART 1 : STEEL CASTINGS.) |
| NF A00-501-3-1991 |
鑄件.訂貨和供應的一般技術條件.第3部分:通過重量壓力和負壓的鋁合金及鎂合金的鑄件 |
(FOUNDRY PRODUCTS. GENERAL TECHNICAL CONDITIONS FOR ORDERING AND SUPPLYING. PART 3 : GRAVITY,LOW PRESSURE AND VACUUM CASTINGS OF ALUMINIUM ALLOYS AND MAGNESIUM ALLOYS.) |
| NF A01-001-1960 |
冶金.錳礦或鉻礦的取樣 |
(SAMPLING OF MANGANESE OR CHROMIUM ORES.) |
| NF A01-009-1986 |
銅和銅合金.材料.詞匯和定義 |
(Copper and copper alloys. Materials. Terms and definitions.) |
| NF A01-010-1971 |
鋁和鋁合金,銅和銅合金.取樣、樣品和試驗用的試件 |
(ALUMINIUM AND ALUMINIUM ALLOYS. COPPER AND COPPER ALLOYS. SAMPLES, SPECIMENS AND TEST PIECES.) |
| NF A01-111-1986 |
銅和銅合金.半成品供應的一般技術要求 |
(Copper and copper alloys. General technical requirements of supply of semi-finished products.) |
| NF A01-400-1988 |
精煉鎳.分析取樣 |
(REFINED NICKEL. SAMPLING FOR ANALYSIS.) |
| NF A01-800-1986 |
鑄造產品.在確定的化學成分中樣品的制備和抽樣.鑄鐵和鑄鋼 |
(FOUNDRY PRODUCTS. SAMPLING AND PREPARATION OF SAMPLES FOR THE DETERMINATION OF THE CHEMICAL COMPOSITION. CAST STEEL AND CAST IRON.) |
| NF A01-810-1975 |
鋅合金錠.發射光譜分析用樣品的制備和抽樣 |
(Zinc alloy ingots. Selection and preparation of samples for spectrographic analysis.) |
| NF A01-811-1975 |
鋅錠.發射光譜分析用樣品的制備和抽樣 |
(Zinc ingots. Selection and preparation of samples for spectrographic analysis.) |
| NF A01-820-1975 |
鋅合金錠.化學分析用樣品的制備和抽樣 |
(Zinc alloy ingots. Selection and preparation of samples for chemical analysis.) |
| NF A01-821-1975 |
鋅錠.化學分析用樣品的制備和抽樣 |
(Zinc ingots. Selection and preparation of samples for chemical analysis.) |
| NF A01-830-1973 |
鍍鋅.分析用樣品的抽樣 |
(ZINC FOR GALVANIZING PURPOSES. SAMPLING FOR ANALYSIS.) |
| NF A02-001-1997 |
鑄造.鑄鐵的設計系統.材料符號及材料標準號 |
(Founding. Designation system for cast iron. Material symbols and material numbers.) |
| NF A02-002-1976 |
有色金屬和非鑄鐵合金制造方式和交貨條件常用名稱 |
(CONVENTIONAL DESIGNATION OF THE METHODS OF MANUFACTURE AND DELIVERY STATES OF CAST NON FERROUS METALS AND ALLOYS.) |
| NF A02-005-1-1992 |
鋼的命名體系.第1部分:鋼名.基本符號 |
(Designation systems for steel. Part 1 : steel names, principal symbols.) |
| NF A02-005-2-1992 |
鋼的命名體系.第2部分:標準號體系 |
(Designation systems for steels. Part 2 : numerical system.) |
| NF A02-006-1996 |
銅和銅合金.歐洲材料號碼系統 |
(COPPER AND COPPER ALLOYS. EUROPEAN NUMBERING SYSTEM. (EUROPEAN STANDARD EN 1412).) |
| NF A02-007-1973 |
鎂和鎂合金制半成品.交貨條件的常用名稱 |
(SEMI-FINISHED PRODUCTS MADE OF MAGNESIUM AND MAGNESIUM ALLOYS. TEMPER DESIGNATION.) |
| NF A02-008-1996 |
銅和銅合金.材料條件或回火硬度標識 |
(Copper and copper alloys. Material condition or temper designation.) |
| NF A02-009-1986 |
銅和銅合金.材料.常用名稱與符號 |
(Copper and copper alloys. Materials. Conventional designation.) |
| NF A02-010-1994 |
鐵制品的熱處理詞匯 |
(Vocabulary of heat treatment terms for ferrous products.) |
| NF A02-011-1970 |
鋁及鋁合金.熱處理和機械處理的詞匯 |
(ALUMINIUM AND ALUMINIUM ALLOYS. VOCABULARY OF HEAT TREATMENTS AND MECHANICAL TREATMENTS.) |
| NF A02-025-2000 |
鋼等級的定義和分類 |
(Definition and classification of grades of steel.) |
| NF A02-120-1994 |
鋁和鋁合金.鍛制產品的化學成分和產品形狀.第1部分:數字命名系統 |
(Aluminium and aluminium alloys. Chemical composition and form of wrought products. Part 1 : numerical designation system.) |
| NF A02-120-3-2003 |
鋁和鋁合金.化學成分和鍛造產品的外形.第3部分:化學成分 |
(Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3 : chemical composition.) |
| NF A02-121-1994 |
鋁和鋁合金.鍛制產品的化學成分和外形.第2部分:基于名稱與符號系統的化學符號 |
(Aluminium and aluminium alloys. Chemical composition and form of wrought products. Part 2 : chemical symbol based designation system.) |
| NF A02-122-1994 |
鋁和鋁合金.鍛制產品的化學成分和產品形狀.第3部分:化學成分 |
(ALUMINIUM AND ALUMINIUM ALLOYS. CHEMICAL COMPOSITION AND FORM OF WROUGHT PRODUCTS. PART 3 : CHEMICAL COMPOSITION. (EUROPEAN STANDARD EN 573-3).) |
| NF A02-123-1994 |
鋁和鋁合金.鍛制產品的化學成分和產品形狀.第4部分:產品的形式 |
(ALUMINIUM AND ALUMIMIUM ALLOYS. CHEMICAL COMPOSITION AND FORM OF WROUGHT PRODUCTS. PART 4 : FORM OF PRODUCTS. (EUROPEAN STANDARD EN 573-4).) |
| NF A02-130-1-2003 |
鋁及鋁合金.再熔主合金和鑄件用合金鋁錠的名稱與符號.第1部分:數字命名系統 |
(Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 1 : numerical designation system.) |
| NF A02-130-2-2003 |
鋁及鋁合金.再熔主合金和鑄件用合金鋁錠的名稱與符號.第2部分:基于命名系統的化學符號 |
(Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 2 : chemical symbol based designation system.) |
| NF A02-130-3-2003 |
鋁及鋁合金.再熔主合金和鑄件用合金鋁錠的名稱與符號.第3部分:化合物的書寫規則 |
(Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 3 : writing rules for chemical composition.) |
| NF A02-150-1993 |
鍛鋁和鋁合金鍛制產品名稱術語 |
(Aluminium and aluminium alloys. Wrought products. Temper designations.) |
| NF A03-000-2000 |
銅和銅合金.螺旋延伸數的測定 |
(Copper and copper alloys - Determination of spiral elongation number.) |
| NF A03-001-2001 |
金屬材料.拉伸試驗.第1部分:常溫試驗方法 |
(Metallic materials - Tensile testing - Part 1 : method of test at ambient temperature.) |
| NF A03-002-1999 |
金屬材料.靜態單軸向試驗機的驗正.第1部分:拉伸/壓縮試驗機 |
(Metallic materials - Verification of static uniaxial testing machines - Part 1 : tension/compression testing machines.) |
| NF A03-003-2002 |
金屬材料.用于驗證單軸向試驗機的作用力檢驗儀的校準 |
(Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines.) |
| NF A03-004-2003 |
金屬材料.單軸向試驗用伸長計的校準 |
(Metallic materials - calibration of extensometers used in uniaxial testing.) |
| NF A03-011-1990 |
金屬材料.擺錘式?jīng)_擊試驗.第1部分:試驗方法 |
(Metallic materials. Charpy impact test. Part 1 : test method.) |
| NF A03-012-1992 |
金屬材料.夏比沖擊試驗.第2部分:試驗機的檢定(沖擊擺).(歐洲標準EN 10045-2) |
(Metallic materials. Charpy impact test. Part 2 : verification of the testing machine (pendulum impact).) |
| NF A03-015-2001 |
鋼.卻貝V形切痕擺式?jīng)_擊試驗.儀器試驗法 |
(Steel - Charpy V-notch pendulum impact test - Instrumented test method.) |
| NF A03-021-1994 |
金屬材料.硬度試驗.第1部分:洛氏表面硬度試驗.(15N、30N、45N、15T、30T和45T刻度) |
(METALLIC MATERIALS. HARDNESS TEST. PART 1 : ROCKWELL TEST (SCALES A, B, C, D, E, F, G, H, K) AND ROCKWELL SUPERFICIAL TEST (SCALES 15N, 30N, 45N, 15T, 30T AND 45T). (EUROPEAN STANDARD EN 10109-1).) |
| NF A03-031-1994 |
金屬材料.布氏硬度試驗.第1部分:試驗方法(ISO 6506-81) |
(METALLIC MATERIALS. BRINELL HARDNESS TEST. PART 1 : TEST METHOD. (EUROPEAN STANDARD EN 10003-1).) |
| NF A03-035-2003 |
在高溫下鋼保證強度最小值的導出法 |
(Method for the derivation of minimum values of proof strength of steel at elevated temperatures.) |
| NF A03-091-1994 |
金屬材料.管材(全截面).彎曲試驗 |
(Metallic materials. Tube (in full section). Bend test.) |
| NF A03-093-1994 |
金屬材料.管.拉力試驗 |
(Metallic materials. Tube. Drift expanding test.) |
| NF A03-096-1994 |
金屬材料.管材.環形拉伸試驗 |
(METALLIC MATERIALS. TUBE. RING TENSILE TEST. (EUROPEAN STANDARD EN 10237).) |
| NF A03-112-1997 |
鋼和鋼制品.機械性能試驗用的樣品和試樣 |
(Steel and steel products. Location and preparation of samples and test pieces for mechanical testing.) |
| NF A03-117-1983 |
鋼鐵產品的質量檢驗 |
(Quality control surveillance of steel products.) |
| NF A03-152-2-1999 |
金屬材料.布氏硬度試驗.第2部分:試驗機的驗證和校正 |
(Metallic materials. Brinell hardness test. Part 2 : verification and calibration of testing machines.) |
| NF A03-152-3-1999 |
金屬材料.布氏硬度試驗.第3部分:標準試塊的校正 |
(Metallic materials. Brinell hardness test. Part 3 : calibration of reference blocks.) |
| NF A03-153-2-1999 |
金屬材料.洛氏硬度試驗.第2部分:試驗機(刻度 A, B, C, D, E, F, G, H, K, N, T)的驗證和校正 |
(Metallic materials. Rockwell hardness test. Part 2 : verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T).) |
| NF A03-153-3-1999 |
金屬材料.洛氏硬度試驗.第3部分:標準試塊的校正(刻度 A, B, C, D, E, F, G, H, K, N, T) |
(Metallic materials. Rockwell hardness test. Part 3 : calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T).) |
| NF A03-154-1-1998 |
金屬材料.維氏硬度試驗.第1部分:試驗方法 |
(Metallic materials. Vickers hardness test. Part 1 : test method.) |
| NF A03-154-2-1998 |
金屬材料.維氏硬度試驗.第2部分:試驗機械的校準 |
(Metallic materials. Vickers hardness test. Part 2 : verification of testing machines.) |
| NF A03-154-3-1998 |
金屬材料.維氏硬度試驗.第3部分:標準塊的校準 |
(Metallic materials. Vickers hardness test. Part 3 : calibration of reference blocks.) |
| NF A03-155-1-2003 |
金屬材料.硬度和材料參數的儀器壓痕試驗.第1部分:試驗方法 |
(Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1 : test method.) |
| NF A03-155-2-2003 |
金屬材料.硬度和材料參數的儀器壓痕試驗.第2部分:試驗機的檢定和校準 |
(Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2 : verification and calibration of testing machines.) |
| NF A03-155-3-2003 |
金屬材料.硬度和材料參數的儀器壓痕試驗.第3部分:硬度標準塊的校準 |
(Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3 : calibration of reference blocks.) |
| NF A03-157-1978 |
鋼鐵產品.鋼材的彎曲試驗 |
(IRON AND STEEL. BEND TEST ON STEEL.) |
| NF A03-158-1978 |
鋼鐵產品.厚度等于或大于0.5mm和小于0.3mm的鋼板與鋼帶的單向彎曲試驗 |
(IRON AND STEEL. SIMPLE BEND TEST ON STEEL SHEET AND STRIP UNDER 3 MM THICK (FROM AND INCLUDING 0,5 MM UP TO BUT EXCLUDING 3 MM).) |
| NF A03-159-2000 |
金屬材料.厚度3mm或小于3mm的板材或帶材.反向彎曲試驗 |
(Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test.) |
| NF A03-172-1980 |
鋼鐵產品.鋼的硬度換算值 |
(Iron and steel. Conversion values of steel hardness.) |
| NF A03-174-1999 |
鋼.伸長值的換算.第1部分:碳素鋼和低合金鋼 |
(Steel. Conversion of elongation values. Part 1 : carbon and low alloy steels.) |
| NF A03-175-1999 |
鋼.伸長值的換算.第2部分:奧氏體鋼 |
(Steel. Conversion of elongation values. Part 2 : austenitic steels.) |
| NF A03-202-1967 |
灰鑄鐵沖擊試驗.(無切口兩端靠緊的試樣) |
(METAL PRODUCTS. MECHANICAL TESTS. GREY CAST IRON IMPACT TEST. (ON UNNOTCHED BEAM).) |
| NF A03-253-1972 |
鋁和鋁合金.銅和銅合金.維氏硬度試驗.0.2-120公斤力的試驗負荷 |
(Aluminium and aluminium alloys. Copper and copper alloys. Vicker hardness. Test-loads ranging from 0,2 to 120 kgf.) |
| NF A03-260-1972 |
鋁和鋁合金.銅和銅合金.簡單彎曲折疊試驗 |
(ALUMINIUM AND ALUMINIUM ALLOYS. COPPER AND COPPER ALLOYS. ORDINARY BENDING TEST.) |
| NF A03-263-1983 |
銅.毛細釬焊圓管的彎曲試驗 |
(COPPER. BENDING TEST FOR ROUND TUBES FOR CAPILLARY BRAZING AND SOLDERING.) |
| NF A03-268-1971 |
鋁和鋁合金.銅和銅合金.線材的簡單扭轉試驗 |
(ALUMINIUM AND ALUMINIUM ALLOYS. COPPER AND COPPER ALLOYS. SIMPLE TORSION TEST FOR WIRE.) |
| NF A03-301-2002 |
鑄件.圖像分析法測量均差.含5%-11%硅的鋁鑄件 |
(Founding - Measurement of the mean intercept using image analysis - Aluminium castings with a 5 to 11 content % of silicium.) |
| NF A03-355-1985 |
鋼鐵產品.蠕變?cè)囼?yàn) |
(Steel products. Creep test.) |
| NF A03-356-1999 |
金屬材料 |
(Metallic materials.) |
| NF A03-400-1983 |
鋼鐵產品.疲勞試驗.一般原則.` |
(Iron and steel. General principles of the fatigue test.) |
| NF A03-401-1983 |
鋼鐵產品.軸向載荷疲勞試驗 |
(Iron and steel. Fatigue test by axial loading.) |
| NF A03-402-1983 |
鋼鐵產品.回轉彎曲疲勞試驗 |
(Iron and steel. Fatigue test by rotary flexion.) |
| NF A03-509-1983 |
鋼鐵產品.疲勞試驗機的校準 |
(Iron and steel. Calibration of fatigue test machines.) |
| NF A03-604-1977 |
鑄造制品-金屬鑄塊.鐵切削性試驗 |
(FOUNDRY PRODUCTS-PIGS.IRON-MACHINABILITY TESTING.) |
| NF A03-652-2003 |
金屬材料.薄板材和帶材.埃里克森壓凹試驗 |
(Metallic materials - Sheet and strip - Erichsen cupping test.) |
| NF A03-657-1987 |
鋼鐵產品.擠壓試驗時,鋼冷變形性能的檢驗 |
(Iron and steel products. Steel cold ductility determination. Compression test.) |
| NF A03-658-2001 |
鋼鐵.鋼薄板和板材塑性應變比值γ的測定方法 |
(Iron and steel - Methode of determination of the plastic strain ration r of steel sheet and plate.) |
| NF A03-659-2001 |
鋼鐵.鋼薄板和板材拉伸應力硬化指數n的測定方法 |
(Iron and steel - Method of determination of the tensile strain hardening exponent n of steel sheet and plate.) |
| NF A03-660-1985 |
鋼制產品.用封閉沖壓坯沖壓帶材或３０mm－９０mm寬帶鋼的試驗 |
(STEEL PRODUCTS. CUPPING TEST WITH CLAMPED BLANKS FOR STRIP. WIDTH RANGE : FROM 30 MM TO 90 MM EXCLUDED.) |
| NF A03-702-1962 |
鋼鐵產品.線材試驗.鐵絲和鋼絲的錫涂層試驗 |
(IRON AND STEEL PRODUCTS. TESTING OF TIN COATINGS ON IRON AND STEEL THREAD.) |
| NF A03-707-1973 |
鋼鐵產品.線材試驗.線材的簡單扭轉試驗 |
(SIMPLE TORSION TESTING OF STEEL WIRES.) |
| NF A03-720-1-2002 |
混凝土的加筋和預應力用鋼.試驗方法.第1部分:加筋棒、鋼絲桿和鋼絲 |
(Steel for the reinforcement and prestressing of concrete - Test methods - Part 1 : reinforcing bars, wire rod and wire.) |
| NF A03-720-2-2002 |
混凝土的鋼筋和預應力用鋼.試驗方法.第2部分:焊接纖維 |
(Steel for the reinforcement and prestressing of concrete - Test methods - Part 2 : welded fabric.) |
| NF A03-720-3-2002 |
混凝土的鋼筋和預應力用鋼.試驗方法.第3部分:預應力鋼 |
(Steel for the reinforcement and prestressing of concrete - Test methods - Part 3 : prestressing steels.) |
| NF A03-750-2000 |
金屬材料.張力的單軸蠕變?cè)囼?yàn).試驗方法 |
(Metallic materials - Uniaxial creep testing in tension - Method of test.) |
| NF A03-760-1-2003 |
金屬材料.拉伸應力松弛試驗.第1部分:試驗機規程 |
(Metallic materials - Tensile stress relaxation testing - Part 1 : procedure for testing machines.) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com