標準號 |
中文名稱 |
英文名稱 |
| NF A03-820-1981 |
鋅和鋅合金.鑄制品與軋制品的硬度試驗 |
(ZINC AND ZINC ALLOYS. METHOD FOR THE VICKERS HARDNESS TESTING ON FOILS AND COILS.) |
| NF A03-830-1981 |
鋅和鋅合金.反復彎曲的疲勞試驗 |
(ZINC AND ZINC ALLOYS. FATIGUE TEST (FLAT BENDING) OF SHEET,FOIL AND DIE CAST PIECES.) |
| NF A04-102-2003 |
鋼.表面粒度的縮微照相測定 |
(Steels - Micrographic determination of the apparent grain size.) |
| NF A04-105-1986 |
鋼鐵產品.鍛鋼中非金屬雜質含量的測定方法. 第1部分:宏觀法 |
(Iron and steel. Methods of determination of the non metallic inclusion content of wrought steels. Part 1 : macroscopic methods.) |
| NF A04-106-1984 |
鋼鐵產品.鍛鋼中非金屬雜質含量的測定方法.第2部分:標準圖象顯微照像法 |
(Iron and steel. Methods of determination of content of non metallic inclusions in wrought steel. Part II : micrographic method using standards diagrams.) |
| NF A04-107-1980 |
鋼鐵產品.測定非合金鋼線材中非金屬雜質含量的顯微照相方法 |
(IRON AND STEEL. MICROGRAPHIC METHOD OF DETERMINATION OF THE NON METALLIC INCLUSION CONTENT OF UNALLOYED WIRE ROD.) |
| NF A04-110-1984 |
鋼鐵產品.一般用于三次擠壓或拉伸的非合金鋼線材.表面檢查 |
(Iron and steel. Wire rods of non-alloy general purpose steel for wire drawing. Surface examination.) |
| NF A04-111-1980 |
鋼鐵產品.高碳鋼線材脫碳深度的顯微照相法測定 |
(IRON AND STEEL. MICROGRAPHIC DETERMINATION OF THE EXTENT OF DECARBURISATION OF NON ALLOY HIGH CARBON STEEL WIRE ROD.) |
| NF A04-112-1980 |
鋼鐵產品.沸騰鋼線材化學雜質成分的描述及使其顯示的顯微照相法 |
(IRON AND STEEL. MACROGRAPHIC METHOD OF SHOWING AND DESCRIBING THE CHEMICAL HETEROGENEITY OF EFFERVESCENT STEEL WIRE ROD.) |
| NF A04-113-1984 |
鋼鐵產品.由鋼錠加工的高碳鋼線材.化學雜質成分的描述及使其顯示的的宏觀檢查法 |
(Iron and steel. High carbon steel wire rod derived from ingots. Macrographic method of showing and describing the chemical heterogeneity.) |
| NF A04-114-1984 |
鋼鐵產品.由連續澆注產品加工的高碳連續鑄錠鋼線材的描述及使其顯示的客觀檢查法化學雜質成分法 |
(IRON AND STEEL. HIGH CARBON CONTINUOUS CAST STEEL WIRE ROD. MACROGRAPHIC METHOD OF SHOWING AND DESCRIBING THE CHEMICAL HETEROGENEITY.) |
| NF A04-150-1984 |
用射線照相術檢查鋁合金和鎂合金鑄件 |
(Radiographic examination of aluminium and magnesium alloy castings.) |
| NF A04-162-1-2003 |
鑄造.超聲檢驗.第1部分:通用鋼鑄件 |
(Founding - Ultrasonic examination - Part 1 : steel castings for general purposes.) |
| NF A04-162-1991 |
鑄造產品.鑄鋼部件.超聲波檢測 |
(Foundry products. Steel castings. Ultrasonic inspection.) |
| NF A04-162-2-2003 |
鑄造.超聲檢驗.第2部分:高應力件用鋼鑄件 |
(Founding - Ultrasonic examination - Part 2 : steel castings for highly stressed components.) |
| NF A04-162-3-2003 |
鑄造.超聲檢驗.第3部分:球墨鑄鐵鑄件 |
(Founding - Ultrasonic examination - Part 3 : spheroidal graphite cast iron castings.) |
| NF A04-190-2003 |
鑄造.射線照相檢驗 |
(Founding - Radiographic examination.) |
| NF A04-191-1-1997 |
鑄造.液體滲透檢驗.第1部分:砂模鑄件、壓鑄件和低壓模鑄件 |
(Founding. Liquid penetrant inspection. Part 1 : sand, gravity die and low pressure die castings.) |
| NF A04-191-2-1998 |
鑄造.液體滲透檢驗.第2部分:熔模鑄件 |
(Founding. Liquid penetrant inspection. Part 2 : investment castings.) |
| NF A04-193-1997 |
鑄造.磁微粒檢驗 |
(Founding - Magnetic particle inspection.) |
| NF A04-194-1996 |
鑄件.機加工表面不均勻度驗收標準指南 |
(FOUNDRY PRODUCTS. GUIDELINE FOR ACCEPTANCE CRITERIA OF DISCONTINUITIES ON MACHINED SURFACES.) |
| NF A04-195-1997 |
鑄造業.用視觸覺比較測定機檢驗表面粗糙度 |
(Founding. Surface roughness inspection by visualtactile comparators.) |
| NF A04-196-1998 |
鑄造.表面不連續鋼砂鑄造的視覺檢驗(歐洲標準EN12454) |
(Founding - Visual examination of surface discontinuities - Steel sand castings.) |
| NF A04-201-1984 |
鋼鐵產品.用非合金結構鋼和特殊結構鋼熱處理.脫碳深度的測定 |
(Steel products. Special purpose unalloy and alloy structural steels for heat traitement. Determination of depth of decarburization.) |
| NF A04-201-2003 |
鋼.脫碳厚度的測定 |
(Steels - Determination of depth of decarburization.) |
| NF A04-202-2003 |
鋼.滲碳層和硬化層深度的測定和檢驗 |
(Steel - Determination and verification of the depth of carburized and hardened cases.) |
| NF A04-203-1984 |
鋼鐵產品.表面加熱淬火常規深度的測定 |
(Steel products. Determination of the effective depth of hardening after flame or induction hardening.) |
| NF A04-204-1985 |
鋼鐵產品.表面淬火薄層的整個厚度或常規厚度的測定 |
(Steel products. Determination of the total or conventional thickness of surface hardened thin layers.) |
| NF A04-302-1984 |
鋼鐵產品.用斷裂法對奧氏體晶粒放大傾向和對工具鋼淬火深度的測定(謝佛特氏試驗) |
(Iron and steel. Determination using fracture test pieces of the austenitic grain growth tendency and of the hardness depth in tool steels (shepherd test).) |
| NF A04-303-1979 |
鋼鐵產品.物理試驗.Jominy(叁密氏)淬火試驗 |
(IRON AND STEEL. PHYSICAL TESTS. JOMINY HARDENABILITY TEST.) |
| NF A04-305-1983 |
鋼鐵產品.厚度大于或等于６mm的鋼板的超聲反射檢驗.質量的定義.試驗方法 |
(IRON AND STEEL. ULTRASONIC REFLECTION TESTING OF SHEET WITH THICKNESS NOT LESS THAN 6 MM. DEFINITION OF QUALITY. TEST METHODS.) |
| NF A04-306-2002 |
鋼鐵.帶平行法蘭和IPE梁的H梁的超聲檢驗 |
(Iron and steel - Ultrasonic testing of H beams with parallel flanges and IPE beams.) |
| NF A04-307-2002 |
無損檢驗.鋼棒的超聲檢驗 |
(Non destructive testing - Ultrasonic testing of steel bars.) |
| NF A04-312-2002 |
無損檢驗.對厚度等于或大于6mm的奧氏體和奧氏體鐵素體不銹鋼扁鋼產品的超聲波檢驗(反射法) |
(Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method).) |
| NF A04-315-1-1999 |
鋼鍛件的非損試驗.第1部分:磁化微粒的檢驗(歐洲標準EN10228-1) |
(Non-destructive testing of steel forgings. Part 1 : magnetic particle inspection.) |
| NF A04-315-2-1998 |
鋼鍛件的無損檢驗.第2部分:穿透試驗 |
(Non-destructive testing of steel forgings. Part 2 : penetrant testing.) |
| NF A04-315-3-1998 |
鋼材鍛造的非損試驗.第3部分:鐵素體鋼和馬氏體鋼鍛造的超聲波試驗 |
(Non-destructive testing of steel forgings. Part 3 : ultrasonic testing of ferritic or martensitic steel forgings.) |
| NF A04-315-4-1999 |
鋼鍛件的無損檢驗.第4部分:奧氏體和奧氏體鐵素體不銹鋼鍛件的超聲波檢驗 |
(Non-destructive testing of steel forgings. Part 4 : ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings.) |
| NF A04-503-1988 |
鋁、銅、鎳及其合金制半成品.粒徑的測定.鋁和鋁合金 |
(Semi-products made from aluminium, copper, nickel and their alloys. Determination of grain size. Aluminium and aluminium alloys.) |
| NF A04-504-1995 |
銅和銅合金.晶粒大小平均值的評定 |
(Copper and copper alloys. Estimation of average grain size.) |
| NF A04-505-1988 |
鋁、銅、鎳及其合金制半成品.粒徑的測定.鎳和鎳合金 |
(Semi-products made from aluminium, copper, nickel and their alloys. Determination of grain size. Nickel and nickel alloys.) |
| NF A05-001-1991 |
金屬和合金材料的腐蝕.詞匯 |
(CORROSION OF METALS AND ALLOYS. VOCABULARY.) |
| NF A05-100-1995 |
人工大氣腐蝕試驗.一般規定(歐洲標準EN ISO 7384) |
(Corrosion test in artificial atmosphere. General requirements.) |
| NF A05-101-1991 |
人工大氣腐蝕試驗.噴鹽試驗 |
(Corrosion tests in artificial atmospheres. Salt spray tests.) |
| NF A05-102-1995 |
金屬基質上的金屬和無機物涂層.鹽液滴腐蝕試驗(SD試驗)(歐洲標準EN ISO 4536) |
(Metallic and non-organic coatings on metallic substrates. Saline droplets corrosion test (SD test).) |
| NF A05-103-1995 |
金屬鍍層.硫代乙酰胺腐蝕試驗(TAA試驗) |
(METALLIC COATINGS. THIOACETAMIDE CORROSION TEST (TAA TEST). (EUROPEAN STANDARD EN ISO 4538).) |
| NF A05-104-1995 |
金屬和其它無機物涂層.涂膏密室耐腐蝕試驗(CORR試驗) |
(Metallic and other non-organic coatings. Corrodkote corrosion test (CORR test).) |
| NF A05-105-1995 |
金屬鍍層和其它無機物涂層.適用于儲存情況的腐蝕試驗一般規則 |
(Metallic and other non-organic coatings. General rules for corrosion tests applicable for storage conditions.) |
| NF A05-106-1995 |
金屬涂層和其它無機物涂層.在一般水分冷凝作用下的二氧化硫試驗 |
(Metallic and other non-organic coatings. Sulfur dioxide test with general condensation of moisture.) |
| NF A05-107-1995 |
汽油污染濃度的最低值在人工環境下的耐腐蝕試驗 |
(CORROSION TESTS IN ARTIFICIAL ATMOSPHERE AT VERY LOW CONCENTRATIONS OF POLLUTING GAS(ES). (EUROPEAN STANDARD EN ISO 10062).) |
| NF A05-110-2001 |
銅和銅合金.經切分帶材的鏜孔區域殘留應力的測定 |
(Copper and copper alloys - Determination of residual stresses in the border area of slit strip.) |
| NF A05-111-1995 |
鍛銅和銅合金.殘余應力的檢測.硝酸汞(1)試驗 |
(Wrought copper and copper alloys. Detection of residual stress. Mercury(I) nitrate test.) |
| NF A05-112-1995 |
銅.氫脆試驗 |
(Copper. Hydrogen embrittlement test.) |
| NF A05-113-1996 |
銅和銅合金.銅管或配件的內表面碳含量測定燃燒法 |
(Copper and copper alloys. Combustion method for determination of carbon on the inner surface of copper tubes or fittings.) |
| NF A05-115-1999 |
銅及銅合金.管的渦流測試 |
(Copper and copper alloys. Eddy current test for tubes.) |
| NF A05-151-1984 |
鋼鐵產品.用硫印法進行宏觀照相檢查(鮑法) |
(Steel products. Macrographic examination by sulfur print (Baumann method).) |
| NF A05-152-1984 |
鋼鐵產品.用強無機酸進行宏觀檢查 |
(Steel products. Macroscopic examination by etching with strong mineral acids.) |
| NF A05-153-1984 |
鋼鐵產品.用銅鹽侵蝕法進行宏觀檢查 |
(Iron and steel. Macroscopic examination by means of copper salt etching.) |
| NF A05-154-1985 |
鋼鐵產品.金屬覆膜技術.(光學檢驗) |
(Steel products. Metallographic replica techniques. (optical examination).) |
| NF A05-159-1998 |
不銹鋼耐晶間腐蝕的測定.第2部分:鐵素體、奧氏體和鐵素體奧氏體(二重)不銹鋼.含有硫酸的介質中的腐蝕試驗 |
(Determination of resistance to intergranular corrosion of stainless steels. Part 2 : ferritic, austenitic and ferritic-austenitic (duplex) stainless steels. Corrosion test in media containing sulfuric acid.) |
| NF A05-160-1998 |
不銹鋼耐晶間腐蝕的測定.第1部分:奧氏體和鐵素體奧氏體(二重)不銹鋼.測定不銹鋼在硝酸介質中質量損失的腐蝕 |
(Determination of resistance to intergranular corrosion of stainless steels. Part 1 : austenitic and ferritic-austenitic (duplex) stainless steels. Corrosion test in nitric acid medium by measurement of loss in mass (Huey test).) |
| NF A05-202-1977 |
離子交換樹脂分離法.樹脂類型、芯桿的制造和使用 |
(APPLICATION OF SEPARATIONS ON ION-EXCHANGE RESINES. RESIN TYPES,COLUMN MAKING AND UTILISATION.) |
| NF A05-270-1998 |
金屬和合金材料的腐蝕.表面海水中的金屬和合金的評估和闡述指南 |
(CORROSION OF METALS AND ALLOYS. GUIDELINES FOR EXPOSING AND EVALUATING METALS AND ALLOYS IN SURFACE SEA WATER. (EUROPEAN STANDARD EN ISO 11306).) |
| NF A05-301-1981 |
鋁合金.厚鋁應力腐蝕試驗 |
(Aluminium alloys. Stress corrosion cracking of thick products.) |
| NF A05-302-1981 |
預應力鋼筋.蒸餾水中應力腐蝕試驗 |
(PRESTRESSING MEMBERS. STRESS CORROSION TEST IN DISTILLED WATER.) |
| NF A05-304-1981 |
建筑工程用高強度鋼.在緩張力試驗條件下對介質脆化效應的評定 |
(HIGH STRENGTH STEELS FOR CIVIL ENGINEERING WORKS. ASSESSMENT OF THE EMBRITTLING EFFECT OF A MEDIUM BY MEANS OF SLOW TENSILE TESTING.) |
| NF A05-305-1981 |
奧氏體不銹鋼和鎳鉻鐵奧氏體合金.在四連多硫酸鈉中約束晶間腐蝕試驗 |
(AUSTENITIC STAINLESS STEELS AND NI - CR - FE AUSTENITIC STAINLESS ALLOYS. INTERGRAIN CORROSION UNDER STRESS TEST IN SODIUM TETRATHIONATE.) |
| NF A05-306-1984 |
鋁合金.薄鋁制品腐蝕試驗 |
(ALUMINIUM ALLOYS (SERIE 5XXX). EXFOLIATION CORROSION TESTING.) |
| NF A05-308-1995 |
金屬和合金的腐蝕.雙金屬在露天暴露腐蝕試驗中腐蝕的測定 |
(Corrosion of metals and alloys. Determination of bimetallic corrosion in outdoor exposure corrosion tests.) |
| NF A05-311-1995 |
金屬和合金材料的腐蝕.黃銅阻抗的定義 |
(CORROSION OF METALS AND ALLOYS. DETERMINATION OF DEZINFICATION RESISTANCE OF BRASS. (EUROPEAN STANDARD EN ISO 6509).) |
| NF A05-400-1998 |
鋼產品抗氫誘發斷裂的評估(歐洲標準EN 10229) |
(EVALUATION OF RESISTANCE OF STEEL PRODUCTS TO HYDROGEN INDUCED CRACKING (HIC). (EUROPEAN STANDARD EN 10229).) |
| NF A05-401-2002 |
金屬和合金的腐蝕.核動力反應堆用的鋯合金的水腐蝕試驗 |
(Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors.) |
| NF A05-402-1995 |
金屬和合金.大氣腐蝕試驗.現場測試的一般要求(歐洲標準EN ISO 8565) |
(METALS AND ALLOYS. ATMOSPHERIC CORROSION TESTING. GENERAL REQUIREMENTS FOR FIELD TESTS. (EUROPEAN STANDARD EN ISO 8565).) |
| NF A05-411-2000 |
金屬材料抗腐蝕性防護.大氣環境中腐蝕的可能性.大氣環境中腐蝕性的分類、確定和評價 |
(Protection of metallic materials against corrosion - Corrosion likelihood in atmospheric environment - Classification, determination and estimation of corrosivity of atmospheric environments.) |
| NF A05-412-1-2003 |
金屬材料的防腐.土壤腐蝕的可能性.第1部分:總則 |
(Protection of metallic materials against corrosion - Corrosion likelihood in soil - Part 1 : general.) |
| NF A05-412-2-2003 |
金屬材料的防腐.土壤腐蝕的可能性.第2部分:低合金和非合金黑色金屬材料 |
(Protection of metallic materials against corrosion - Corrosion likelihood in soil - Part 2 : low alloyed and non alloyed ferrous materials.) |
| NF A05-501-6-2003 |
金屬和合金的腐蝕.應力腐蝕試驗.第6部分:恒定負荷或恒定位移條件下試驗用預裂試樣的制備 |
(Corrosion of metals and alloys - Stress corrosion testing - Part 6 : preparation and use of pre-cracked specimens for tests under constant load or constant displacement.) |
| NF A05-661-2003 |
陰極保護測量技術 |
(Cathodic protection measurement techniques.) |
| NF A05-662-2001 |
埋入的或浸漬的金屬結構的陰極保護.管線應用和一般原則 |
(Cathodic protection of buried or immersed metallic structures - General principles and application for pipelines.) |
| NF A05-668-2000 |
混凝土中鋼筋的陰極保護 |
(Cathodic protection of steel in concrete.) |
| NF A05-669-2000 |
海水中陰極保護的基本原理 |
(General principles of cathodic protection in sea water.) |
| NF A05-670-2000 |
固定鋼近海結構的陰極保護 |
(Cathodic protection for fixed steel offshore structures.) |
| NF A05-671-2001 |
海底管道的陰極保護 |
(Cathodic protection for submarine pipelines.) |
| NF A05-673-2001 |
鋼制近海浮式建筑物的陰極保護 |
(Cathodic protection for steel offshore floating structures.) |
| NF A05-675-2001 |
海港裝置的陰極保護 |
(Cathodic protection for harbour installations.) |
| NF A05-676-2003 |
金屬結構的內部陰極保護 |
(Internal cathodic protection of metallic structures.) |
| NF A05-677-1999 |
陰極保護.用于與陰極保護相接的埋沒的或浸入的鋼管防腐作用的外有機涂層.帶和可縮材料(歐洲標準EN12068) |
(Cathodic protection. External organic coatings for the corrosion protection of buried or immersed steel pipelines used in conjunction with cathodic protection. Tapes and shrinkable materials.) |
| NF A05-690-1996 |
陰極保護.質保人員權限等級的定義 |
(CATHODIC PROTECTION. DEFINITION OF COMPETENCE LEVELS OF OPERATORS FOR THEIR QUALIFICATION.) |
| NF A05-691-1996 |
陰極保護.操作者的證明.一般原理 |
(CATHODIC PROTECTION. OPERATOR`S CERTIFICATION. GENERAL PRINCIPLES.) |
| NF A06-087-1966 |
錳礦的化學分析.鈷含量的分光光度法測定 |
(CHEMICAL ANALYSIS OF MANGANESE ORES. SPECTROPHOTOMETRIC DETERMINATION OF COBALT.) |
| NF A06-088-1966 |
錳礦的化學分析.鎳的重量法和分光光度法測定 |
(CHEMICAL ANALYSIS OF MANGANESE ORES. SPECTROPHOTOMETRIC AND GRAVIMETRIC DETERMINATION OF NICKEL.) |
| NF A06-089-1966 |
錳礦的化學分析.鉻的容量法和分光光度法測定 |
(CHEMICAL ANALYSIS OF MANGANESE ORES. SPECTROPHOTOMETRIC AND VOLUMETRIC DETERMINATION OF CHROMIUM.) |
| NF A06-092-1962 |
錳礦的化學分析.石灰的測定 |
(CHEMICAL ANALYSIS OF MANGANESE ORES. DETERMINATION OF LIME.) |
| NF A06-093-1962 |
錳礦的化學分析.氧化鎂的測定.重量法 |
(CHEMICAL ANALYSIS OF MANGANESE ORES. GRAVIMETRIC DETERMINATION OF MANGANESE.) |
| NF A06-095-1966 |
錳礦的化學分析.釩的分光光度法測定 |
(CHEMICAL ANALYSIS OF MANGANESE ORES. SPECTROPHOTOMETRIC DETERMINATION OF VANADIUM.) |
| NF A06-096-1959 |
錳礦的化學分析.濕度的測定 |
(Chemical analysis of manganese ores. Determination of moisture content (on laboratory samples).) |
| NF A06-099-1966 |
錳礦的化學分析.鋅的重量法測定 |
(CHEMICAL ANALYSIS OF MANGANESE ORES. POLAROGRAPHIC AND GRAVIMETRIC DETERMINATION OF ZINC.) |
| NF A06-100-1969 |
錳礦的化學分析.硅的重量法測定 |
(CHEMICAL ANALYSIS OF MANGANESE ORES. GRAVIMETRIC DETERMINATION OF SILICON DIOXIDE.) |
| NF A06-102-1969 |
錳礦的化學分析.錳的電位測定 |
(CHEMICAL ANALYSIS OF MANGANESE ORES. POTENTIOMETRIC DETERMINATION OF MANGANESE.) |
| NF A06-103-1969 |
錳礦的化學分析.磷的分光光度法測定 |
(CHEMICAL ANALYSIS OF MANGANESE ORES. SPECTROPHOTOMETRIC DETERMINATION OF PHOSPHORUS.) |
| NF A06-105-1970 |
錳礦的化學分析.硫的測定.燃燒法 |
(CHEMICAL ANALYSIS OF MANGANESE ORES. DETERMINATION OF SULPHUR. COMBUSTION METHOD.) |
| NF A06-107-1970 |
錳礦的化學分析.銅的分光光度法測定 |
(CHEMICAL ANALYSIS OF MANGANESE ORES. SPECTROPHOTOMETRIC DETERMINATION OF COPPER.) |
| NF A06-108-1962 |
錳礦的化學分析.氧化鋇的重量法測定 |
(CHEMICAL ANALYSIS OF MANGANESE ORES. GRAVIMETRIC DETERMINATION OF BARIUM OXIDE.) |
| NF A06-202-1995 |
銀和銀珠寶合金的測定.溴化鉀容量法 |
(DETERMINATION OF SILVER IN SILVER JEWELLERY ALLOYS. VOLUMETRIC (POTENTIOMETRIC) METHOD USING POTASSIUM BROMIDE. (EUROPEAN STANDARD EN 31427).) |
| NF A06-203-1995 |
在鉑飾用合金中鉑含量測定.用氯化汞還原法測定重量 |
(DETERMINATION OF PLATINUM IN PLATINUM JEWELLERY ALLOYS. GRAVIMETRIC METHOD AFTER REDUCTION WITH MERCURY(I) CHLORIDE. (EUROPEAN STANDARD EN ISO 11489).) |
| NF A06-204-1995 |
鈀珠寶合金中鈀的測定.丁二酮肟重量的測定 |
(DETERMINATION OF PALLADIUM IN PALLADIUM JEWELLERY ALLOYS. GRAVIMETRIC METHOD WITH DIMETHYL GLYOXIME. (EUROPEAN STANDARD EN ISO 11490).) |
| NF A06-205-1995 |
在鉑飾用合金中鉑含量測定.六氯鉑酸二銨沉淀后測定重量 |
(DETERMINATION OF PLATINUM IN PLATINUM JEWELLERY ALLOYS. GRAVIMETRIC METHOD AFTER PRECIPITATION OF DIAMMONIUM HEXACHLOROPLATINATE. (EUROPEAN STANDARD EN ISO 11210).) |
| NF A06-220-1998 |
身體穿刺組件.用閃爍原子吸收光譜對鑷含量測定的參考方法 |
(BODY-PIERCING POST ASSEMBLIES. REFERENCE TEST METHOD FOR DETERMINATION OF NICKEL CONTENT BY FLAME ATOMIC ABSORPTION SPECTROMETRY. (EUROPEAN STANDARD EN 1810).) |
| NF A06-221-1999 |
與表面直接和長期接觸的產品輻射鎳的參考試驗方法 |
(Reference test method for release of nickel from products intended to come into direct and prolonged contact with the skin.) |
| NF A06-223-1999 |
涂覆產品輻射鎳檢測的磨損和腐蝕模擬方法 |
(METHOD FOR THE SIMULATION OF WEAR AND CORROSION FOR THE DETECTION OF NICKEL RELEASE FROM COATED ITEMS. (EUROPEAN STANDARD EN 12472).) |
| NF A06-301-1989 |
冶金材料分析.鋼和鑄鐵的總含碳的測定.(在氧氣中燃燒后的重量法)(歐洲標準EN10036) |
(Chemical analysis of ferrous materials. Determination of total carbon in steels and irons. Gravimetric method after combustion in a stream of oxygen.) |
| NF A06-303-1962 |
鋼和生鐵的化學分析.錳的分光光度法測定 |
(CHEMICAL ANALYSIS OF STEEL AND CAST IRON. SPECTROPHOTOMETRIC DETERMINATION OF MANGANESE.) |
| NF A06-304-1961 |
鋼和生鐵的化學分析.燃燒后硫的測定 |
(CHEMICAL ANALYSIS OF STEEL AND CAST IRON. DETERMINATION OF SULPHUR AFTER COMBUSTION.) |
| NF A06-307-1990 |
鋼和生鐵.鎳的測定.重量法或滴定法 |
(Steel and iron. Determination of nickel content. Gravimetric or titrimetric mehod.) |
| NF A06-308-1985 |
鋼和生鐵的化學分析.鎳含量的測定.分子吸收分光光度法 |
(Chemical analysis of steel and cast iron. Determination of nickel content. Molecular absorption spectrophotometric method.) |
| NF A06-311-1987 |
鋼和生鐵的化學分析.鈷的測定.分子吸收分光光度法 |
(Chemical analysis of steel and cast iron. Determination of cobalt content. Molecular absorption spectrophotometric method.) |
| NF A06-313-1987 |
鋼和生鐵的化學分析.鈦的測定.分光光度法 |
(Chemical analysis of steel and cast iron. Determination of titanium content. Spectrophotometric method.) |
| NF A06-314-1995 |
鋼和鐵.鈦含量測定.二安替比林基代甲烷分光光度法 |
(STEEL AND IRON. DETERMINATION OF TITANIUM CONTENT. DIANTIPYRYLMETHANE SPECTROPHOTOMETRIC METHOD. (EUROPEAN STANDARD EN ISO 10280).) |
| NF A06-320-1989 |
冶金材料的化學分析.鋼中鈮的測定.分子吸收分光光度法 |
(Chemical analysis of ferrous materials. Determination of niobium in steels. Spectrophotometric method.) |
| NF A06-323-1987 |
鋼的化學分析.氮的測定.分子吸收分光光度法 |
(Chemical analysis of steels. Determination of nitrogen content. Molecular absorption spectrophotometric method.) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com