標準號 |
中文名稱 |
英文名稱 |
| NF E22-513-1987 |
滑動軸承.整體銅合金套筒.尺寸與公差 |
(Plain bearings. Solid copper alloy bushes. Dimensions and tolerances.) |
| NF E22-515-1983 |
滑動軸承.薄型半邊軸瓦.尺寸，公差和檢驗方法 |
(PLAIN BEARINGS. THIN-WALLED HALF BEARINGS. DIMENSIONS, TOLERANCES AND METHODS OF CHECKING.) |
| NF E22-516-1984 |
滑動軸承.薄型凸緣半邊軸瓦.尺寸，公差和控制方法 |
(PLAIN BEARINGS. THIN-WALLED FLANGED HALF BEARINGS. DIMEBSIONS,TOLERANCES AND METHODS OF CHECKING.) |
| NF E22-517-1984 |
滑動軸承.薄型半邊軸瓦.伸長度的檢驗方法 |
(PLAIN BEARINGS. THIN-WALLED HALF BEARINGS. METHOD OF PERIPHERAL LENGTH CHECKING.) |
| NF E22-520-1984 |
滑動軸承.帶狀材料制的止推墊圈.尺寸和公差 |
(PLAIN BEARINGS. RING TYPES THRUST WASHERS MADE FROM STRIP. DIMENSIONS AND TOLERANCES.) |
| NF E22-521-1984 |
滑動軸承.在壓機上切邊的雙金屬半止推墊圈.特性和公差 |
(PLAIN BEARINGS. PRESSED BIMETALLIC HALF THRUST WASHERS. FEATURES AND TOLERANCES.) |
| NF E22-550-1992 |
滑動軸承.厚壁滑動軸承用多層材料 |
(Plain bearings. Multilayer materials for thin-walled plain bearings.) |
| NF E22-551-1992 |
滑動軸承.多層滑動軸承用的鉛和錫鑄造合金 |
(Plain bearings. Lead and tin casting alloys for multilayer plain bearings.) |
| NF E22-552-1986 |
滑動軸承.厚壁多層軸承合金底襯的要求 |
(PLAINS BEARINGS. REQUIREMENTS ON BACKINGS FOR THICK-WALLED MULTILAYER BEARINGS.) |
| NF E22-553-1992 |
滑動軸承.銅合金.第1部分:整塊的和多層厚壁滑動軸承用鑄銅合金 |
(Plain bearings. Copper alloys. Part 1 : cast copper alloys for solid and multilayer thick-walled plaint bearings.) |
| NF E22-554-1992 |
滑動軸承.銅合金.第2部分:整塊銅合金滑動軸承用鍛銅合金 |
(Plain bearing. Copper alloys. Part 2 : wrough copper alloys for solid plain bearings.) |
| NF E22-555-1985 |
滑動軸承.整體軸承用的鋁合金 |
(Plain bearings. Aluminium alloy for solid bearings.) |
| NF E22-561-1986 |
滑動軸承.軸承材料硬度試驗.第1部分:復合材料 |
(PLAIN BEARINGS. HARDNESS TESTING OF BEARING METALS. PART 1 : COMPOUND METERIALS.) |
| NF E22-563-1988 |
滑動軸承.金屬薄壁軸瓦.0.01彈性極限值的測定 |
(Plain bearings. Metallic thin-walled half bearings. Determination of the sigma 0,01 elastic limit.) |
| NF E22-564-1993 |
滑動軸承.多層金屬滑動軸承.第3部分:無損穿透性試驗 |
(PLAIN BEARINGS. METALLIC MULTILAYER PLAIN BEARINGS. PART 3 : NON-DESTRUCTIVE PENETRANT TESTING.) |
| NF E22-570-1987 |
滑動軸承.金屬軸承材料的壓縮試驗 |
(PLAIN BEARINGS. COMPRESSION TESTING OF METALLIC BEARING MATERIALS.) |
| NF E22-571-1986 |
滑動軸承.軸承材料硬度試驗.第2部分:整體材料 |
(PLAIN BEARINGS. HARDNESS TESTING OF BEARING METALS. PART 2 : SOLID MATERIALS.) |
| NF E22-580-1987 |
滑動軸承.耐磨材料摩擦性能試驗.第1部份：帶耐磨材料，配料和油的組件在極限潤滑條件下摩擦與磨損性能試驗 |
(PLAIN BEARINGS. TESTING OF THE TRIBOLOGICAL BEHAVIOUR OF BEARING MATERIALS. PART 1 : TESTING OF THE FRICTION AND WEAR BEHAVIOUR OF BEARING MATERIAL/MATING MATERIAL/OIL COMBINATIONS UNDER CONDITIONS OF BOUNDARY LUBRICATION.) |
| NF E22-601-1985 |
聯軸節.工業萬向接頭傳動.定義.特性 |
(Couplings. Industrial cardan shaft. Definition. Characteristics.) |
| NF E22-603-1985 |
聯軸節.工業萬向接頭傳動.驗收 |
(Couplings. Industrial cardan shaft. Acceptance.) |
| NF E22-604-1985 |
聯軸節.工業萬向接頭傳動.用法蘭盤固定 |
(Couplings. Industrial cardan shaft. Flange mounting.) |
| NF E22-610-1986 |
機械傳動.聯軸節部件.分類.術語.圖形符號 |
(Mechanical transmissions. Coupling devices. Classification. Terminology. Graphical symbols.) |
| NF E22-611-1983 |
機械傳動.聯節軸部件.作用.名稱.應用范圍 |
(Mechanical transmissions. Couplings. Function, designation and field of use.) |
| NF E22-612-1979 |
機械傳動.聯節軸部件.帶發動機的機器的安裝和校準的一般條件 |
(MECHANICAL TRANSMISSIONS. COUPLINGS. GENERAL CONDITIONS OF INSTALLATION AND ALIGNMENT OF A MACHINE WITH ITS MOTOR.) |
| NF E22-613-1983 |
機械傳動.聯軸節.撓性和彈性聯軸節的計算 |
(Mechanical transmissions. Couplings. Calculation of flexible or elastic couplings.) |
| NF E22-614-1986 |
械械傳動.聯節軸部件.選配聯軸節所需的工業部件 |
(Mechanical transmissions. Coupling devices. Technical elements necessary for the selection of a coupler.) |
| NF E22-620-1980 |
固定環連接.尺寸．公差和通常連接的表面狀態 |
(PRESSED-ON ASSEMBLIES. DIMENSIONS,TOLERANCES AND SURFACE CONDITION OF USUAL ASSEMBLIES.) |
| NF E22-621-1984 |
固定環連接.在圓柱支承面上.功能，操作，計算 |
(Pressed-on assemblies on cylindrical bearings. Function. Realisation. Calculation.) |
| NF E23-001-1-1998 |
齒輪術語詞匯.第1部分:有關幾何學上的定義 |
(Vocabulary of gear terms. Part 1 : definitions related to geometry.) |
| NF E23-002-1988 |
齒輪詞匯.幾何定義.螺旋齒輪 |
(GEARS. GLOSSARY OF WORM GEAR PAIRS. GEOMETRICAL DEFINITIONS.) |
| NF E23-005-1998 |
齒輪的國際符號表示法.幾何參數符號 |
(International gear notation. Symbols for geometrical data.) |
| NF E23-007-1-1995 |
圓柱齒輪.準確度的ISO體系.第1部分:齒輪齒對應齒根面相應偏差的容許值和定義 |
(Cylindrical gears. ISO system of accuracy. Part 1 : definitions and allowable values of deviations relevant to corresponding flanks of gear teeth.) |
| NF E23-007-2-1997 |
圓柱齒輪.ISO 體系的準確度.第2部分:有關放射要素偏差度和輸出信息的相應偏差的容許值和定義 |
(CYLINDRICAL GEARS. ISO SYSTEM OF ACCURACY. PART 2 : DEFINITIONS AND ALLOWABLE VALUES OF DEVIATIONS RELEVANT TO RADIAL COMPOSITE DEVIATIONS AND RUNOUT INFORMATION.) |
| NF E23-009-1998 |
普通和重型技術設備用圓柱齒輪.標準基本齒條齒牙剖面 |
(Cylindrical gears for general and heavy engineering. Standard basic rack tooth profile.) |
| NF E23-014-1994 |
齒輪.ISO術語.齒輪齒術語:磨損和損壞 |
(Gears. ISO system of terminology. Terminology for the appearance of gear teeth : wear and damages.) |
| NF E23-016-1986 |
錐形直的齒輪.給齒輪工人的說明書 |
(STRAIGHT BEVEL GEARS. INFORMATION TO BE GIVEN TO THE MANUFACTURER.) |
| NF E23-018-1988 |
蝸輪供貨要求 |
(WORM GEARS. INFORMATION TO BE GIVEN TO THE MANUFACTURER.) |
| NF E23-022-1-2002 |
齒輪裝置的驗收標準.第1部分:空氣聲的測試標準 |
(Acceptance code for gear units - Part 1 : test code for airborne sound.) |
| NF E23-030-1-2002 |
正齒輪和斜齒輪承載能力的計算.第1部分:基本原理、說明和一般影響因素 |
(Calculation of load capacity of spur and helical gears - Part 1 : basic principles, introduction and general influence factors.) |
| NF E23-030-2-2003 |
正齒輪和斜齒輪承載能力的計算.第2部分:齒輪表面耐用能力的計算 |
(Calculation of load capacity of spur and helical gears - Part 2 : calculation of surface durability (pitting).) |
| NF E23-030-3-2003 |
正齒輪和斜齒輪承載能力的計算.第3部分:輪齒彎曲強度的計算 |
(Calculation of load capacity of spur and helical gears - Part 3 : calculation of tooth bending strength.) |
| NF E23-030-5-2003 |
直齒輪和斜齒輪承載能力的計算.第5部分:材料的強度和質量 |
(Calculation of load capacity of spur and helical gears - Part 5 : strength and quality of materials.) |
| NF E23-035-2003 |
石油和天然氣工業.特殊用途高速齒輪部件 |
(Petroleum and natural gas industries - High speed special-purpose gear units.) |
| NF E23-150-1977 |
鏈條傳動.鏈條長度和軸距的計算 |
(CHAIN TRANSMISSIONS.CALCULATION OF CHAIN LENGTHS AND DISTANCES BETWEEN CENTRES.) |
| NF E24-001-1996 |
皮帶傳動.V帶、V肋帶及對應槽輪.詞匯 |
(Belt drives. V-belts and V-ribbed belts, and corresponding grooved pulleys. Vocabulary.) |
| NF E24-205-1990 |
皮帶傳動.梯形皮帶用槽輪(在有效寬度范圍的基本型式).皮帶輪凹槽的幾何檢驗 |
(BELT DRIVES. GROOVED PULLEYS FOR V-BELTS (SYSTEM BASED ON EFFECTIVE WIDTH). GEOMETRICAL INSPECTION OF GROOVES.) |
| NF E24-221-1995 |
皮帶傳動.窄接合型三角皮帶.有效長度 |
(Belt drives. Narrow joined V-belts. Lengths in effective system.) |
| NF E24-301-1-1989 |
同步皮帶傳動.皮帶.第1部分:節距符號MXL、XL、L、H、XH和XXH;米制和英制尺寸 |
(Synchronous belt drives. Belts. Part 1 : pitch codes mxl, XL,L,H, XH and XXH. Metric and inch dimensions.) |
| NF E24-301-2-1989 |
同步皮帶傳動.皮帶.第2部分:節距符號 MXL和XXL.米制尺寸 |
(Synchronous belt drives. Belts. Part 2 : pitch codes mxl and XXL. Metric dimensions.) |
| NF E24-312-1991 |
皮帶傳動.抗靜電、無中斷同步皮帶的電導率.規范和試驗方法 |
(BELT DRIVES. ELECTRICAL CONDUCTIVITY OF ANTISTATIC ENDLESS SYNCHRONOUS BELTS. CHARACTERISTICS AND TEST METHOD.) |
| NF E24-403-1995 |
皮帶傳動.V-線皮帶.直線密度的定義 |
(BELT DRIVES. V-RIBBED BELTS. DETERMINATION OF LINEAR DENSITY.) |
| NF E24-404-1995 |
皮帶傳動.V型加筋皮帶.間距,角度和拉線位置的測定 |
(BELT DRIVES. V-RIBBED BELTS. DETERMINATION OF MEASUREMENT OF PITCH, ANGLE AND CORD POSITION.) |
| NF E24-405-1997 |
皮帶傳動.V型加筋皮帶.工業用PJ和PH型材的動力試驗方法(家用) |
(BELT DRIVES. V-RIBBED BELTS. DYNAMIC TEST METHODS FOR PJ AND PH PROFILES FOR INDUSTRIAL APPLICATIONS (SPECIFIC TO DOMESTIC APPLIANCES).) |
| NF E25-001-2003 |
緊固件.質量保證體系 |
(Fasteners - Quality assurance system.) |
| NF E25-004-1984 |
緊固件.簡單標記 |
(Fasteners. Short notations.) |
| NF E25-006-2000 |
緊固件.驗收檢驗 |
(Fasteners - Acceptance inspection.) |
| NF E25-007-1982 |
緊固件.定貨和供貨條件 |
(Fasteners. Order and delivery specifications.) |
| NF E25-009-1999 |
緊固件.電鍍層 |
(Fasteners - Electroplated coatings.) |
| NF E25-011-1992 |
緊固件的機械特性.由非亞鐵金屬制造的螺栓,螺釘,柱螺栓和螺母 |
(MECHANICAL PROPERTIES OF FASTENERS. BOLTS, SCREWS, STUDS AND NUTS MADE OF NON-FERROUS METALS. (EUROPEAN STANDARD EN 28839).) |
| NF E25-019-2000 |
緊固件.ISO米制外螺紋部件的端頭 |
(Fasteners - Ends of parts with external ISO metric screw thread.) |
| NF E25-021-1994 |
螺釘?shù)氖植?歐洲標準EN ISO 4757) |
(Cross recesses for screws.) |
| NF E25-022-1-2001 |
緊固件公差.螺栓、螺釘、雙頭螺栓和螺母.第1部分:產品等級A、B及C |
(Tolerances for fasteners - Bolts, screws, studs and nuts - Part 1 : product grades A, B and C.) |
| NF E25-022-1987 |
緊固件.Ｆ級螺釘和螺帽公差（精密機械）.螺紋直徑1到3mm |
(FASTENERS. TOLERANCES FOR BOLTS,SCREWS AND NUTS PRODUCT GRADE F (FINE MECHANIC). THREAD DIAMETERS FROM 1 UP TO 3 MM.) |
| NF E25-023-1992 |
緊固件.螺栓和螺釘?shù)淖杂沙叽缈?/td>
| (Fasteners. Clearance hole for bolts and screws.) |
| NF E25-035-1995 |
緊固件.不銹鋼螺紋連接件.試驗方法.使用合格證 |
(FASTENERS. STAINLESS STEEL THREADED CONNECTIONS. TEST METHODS. FITNESS FOR USE.) |
| NF E25-040-2000 |
緊固件.非電解用鋅片覆層 |
(Fasteners - Non-electrolytically applied zinc flake coatings.) |
| NF E25-042-2003 |
耐腐蝕不銹鋼緊固件的鈍化 |
(Passivation of corrosion-resistant stainless-steel fasteners.) |
| NF E25-100-1-1999 |
碳鋼合金制成的緊固件的機械性能.第1部分:螺栓、螺釘和螺柱 |
(Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1 : bolts, screws and studs.) |
| NF E25-100-3-1992 |
緊固件.表面不連續性.第1部分:一般要求的螺栓、螺釘和螺柱 |
(FASTENERS. SURFACE DISCONTINUITIES. PART 1 : BOLTS, SCREWS AND STUDS FOR GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 26157-1).) |
| NF E25-100-4-1992 |
緊固件.表面不連續性.第3部分:特殊要求的螺栓、螺釘和螺柱 |
(FASTENERS. SURFACE DISCONTINUTIES. PART 3 : BOLTS, SCREW AND STUDS FOR SPECIAL REQUIREMENTS. (EUROPEAN STANDARD EN 26157-3).) |
| NF E25-100-5-1998 |
碳鋼和不銹鋼制緊固件的機械性能.第5部分:不處在拉伸應力下的固定螺釘和類似螺紋緊固件 |
(Mechanical properties of fasteners made of carbon steel and alloy steel. Part 5 : set screws and similar threaded fasteners not under tensile stresses.) |
| NF E25-100-6-1998 |
不銹鋼緊固件耐腐蝕的機械特性.螺栓,螺絲和雙端螺栓 |
(Mechanical properties of corrosion-resistant stainless-steel fasteners. Part 1 : bolts, screws and studs.) |
| NF E25-100-7-1995 |
緊固件的機械性能.第7部分:公稱直徑1-10mm的螺栓和螺釘?shù)呐ちυ囼灪妥钚∨ぞ?/td>
| (MECHANICAL PROPERTIES OF FASTENERS. PART 7 : TORSIONAL TEST AND MINIMUM TORQUES FOR BOLTS AND SCREWS WITH NOMINAL DIAMETERS 1 MM TO 10 MM. (EUROPEAN STANDARD EN 20898-7).) |
| NF E25-100-8-1998 |
不銹鋼緊固件耐腐蝕的機械特性.不低于拉伸應力下配套螺釘和類似緊固件 |
(Mechanical properties of corrosion-resistant stainless-steel fasteners. Part 3 : set screws and similar fasteners not under tensile stress.) |
| NF E25-101-1996 |
技術產品文獻加工.彈簧.第2部分:圓柱螺旋狀壓縮彈簧的數據表示(歐洲標準EN ISO 2162-2) |
(Technical product documentation. Springs. Part 2 : presentation of data for cylindrical helical compression springs.) |
| NF E25-102-1977 |
拉力彈簧.給制造者的指示 |
(TENSION SPRINGS. INFORMATION TO BE SUPPLIED TO THE MANUFACTURER.) |
| NF E25-103-1977 |
扭力彈簧.給制造者的指示 |
(TORSIONAL SPRINGS. INFORMATION TO BE SUPPLIED TO THE MANUFACTURER.) |
| NF E25-104-1978 |
錐形彈簧墊圈.動力墊圈，所謂盤形彈簧 |
(CONICAL SPRING WASHERS. DYNAMIC WASHERS (OR SO-CALLED BELLEVILLE SPING WASHERS).) |
| NF E25-105-1996 |
技術產品文獻.彈簧.第3部分:詞匯 |
(Technical product documentation. Springs. Part 3 : vocabulary.) |
| NF E25-106-2-2002 |
圓線和圓棒制成的圓柱螺旋彈簧.計算和設計.第2部分:拉簧 |
(Cylindrical helical springs made from round wire and bar - Calculation and design - Part 2 : extension springs.) |
| NF E25-106-3-2002 |
圓線和圓棒制成的圓柱螺旋彈簧.計算和設計.第3部分:扭桿彈簧 |
(Cylindrical helical springs made from round wire and bar - Calculation and design - Part 3 : torsion springs.) |
| NF E25-107-1983 |
金屬用螺釘.內部六葉埋頭.Ａ級.符號ＦＸ |
(SCREWS. SIX LOBES RECESSED CONTERSUNK HEAD. PRODUCT GRADE A. SYMBOL FX.) |
| NF E25-108-2001 |
半埋頭內六角螺釘 |
(Hexalobular socket raised countersunk head screws.) |
| NF E25-109-2001 |
平頭內六角螺釘 |
(Hexalobular socket pan head screws.) |
| NF E25-110-2001 |
圓柱頭內六角螺釘 |
(Hexalobular socket head cap screws.) |
| NF E25-111-2001 |
凸頭內六角螺釘 |
(Hexalobular socket cheese head screws.) |
| NF E25-112-2001 |
六角頭螺栓.產品等級A和B |
(Hexagon head bolts - Product grades A and B.) |
| NF E25-113-1992 |
緊固件.六角頭螺栓.B級、縮桿制品 |
(Fasteners. Hexagon head bolts. Product grade B. Reduced shank (shank diameter = pitch diameter).) |
| NF E25-114-2001 |
六角頭螺釘.產品等級A和B |
(Hexagon head bolts - Product grades A and B.) |
| NF E25-115-1-2001 |
六角頭螺栓.產品等級C |
(Hexagon head bolts - Product grade C.) |
| NF E25-115-2-2001 |
六角頭螺釘.產品等級C |
(Hexagon head screws - Product grade C.) |
| NF E25-116-1983 |
金屬用螺釘.方頭.標準桿.A和B級.符號Q |
(Square head screws. Product grades A and B. Symbol Q.) |
| NF E25-117-1983 |
金屬用螺釘.方頭.全螺紋.A和B級.符號Q |
(Square head screws. Product grades A and B. Symbol Q.) |
| NF E25-118-1983 |
金屬用螺釘.方頭.C級.符號Q |
(Square head screws. Product grade C. Symbol Q.) |
| NF E25-119-1-1994 |
帶有H型或Z型的十字槽沉頭螺釘(普通頭型).產品等級A.第1部分:性能類別4.8的鋼 |
(Countersunk flat head screws (common head style) with type H or type Z cross recessed. Product grade A. Part 1 : steel of property class 4.8.) |
| NF E25-119-2-1994 |
十字槽沉頭螺釘(一般頭形).等級A.第2部分:8.8類特性鋼,不銹鋼和有色金屬 |
(Cross recessed countersunk flat head scews (common head style). Grade A. Part 2 : steel of property class 8.8, stainless steel and non-ferrous metals.) |
| NF E25-120-1994 |
帶有H型或Z型的十字槽半沉頭螺釘(普通頭型).產品等級A |
(Countersunk raised head screws (common head style) with type H or type Z cross recessed. Product grade A.) |
| NF E25-121-1994 |
帶有H型或Z型十字槽的平圓頭螺釘.產品等級A |
(Pan head screws with type H or type Z cross recess. Product grade A.) |
| NF E25-122-1984 |
金屬用螺釘.稱作“POLIER“的Z十字槽寬圓頭.A級.符號RLZ |
(SCREWS. CROSS RECESSED MUSHROOM HEAD (POELIERS). PRODUCT GRADE A. SYMBOL RL Z.) |
| NF E25-123-1994 |
一字槽沉頭螺釘(普通頭型).產品等級A |
(Slotted countersunk flat head screws (common head style). Product grade A.) |
| NF E25-124-1994 |
一字槽半沉頭螺釘(普通頭型).產品等級A |
(Slotted raised countersunk head screws (common head style). Product grade A.) |
| NF E25-126-1997 |
內六角圓頭螺釘 |
(HEXAGON SOCKET BUTTON HEAD SCREWS. (EUROPEAN STANDARD EN ISO 7380).) |
| NF E25-128-1994 |
一字槽平圓頭螺釘.產品等級A |
(Slotted pan head screws. Product grade A.) |
| NF E25-130-1986 |
加墊圈的金屬用螺釘.錐形光滑壓緊墊圈.Ａ級 |
(SCREWS WITH CONICAL SPRING TIGHTENING WASHER. PRODUCT GRADE A.) |
| NF E25-131-1986 |
加墊圈的金屬用螺釘.內齒錐形墊圈.Ａ級 |
(SCREWS WITH CONICAL SPRING INTERNAL TOOTHED TIGHTENING WASHER. PRODUCT GRADE A.) |
| NF E25-132-1986 |
加墊圈的金屬用螺釘.外齒墊圈.Ａ級 |
(SCREWS WITH SERRATED EXTERNAL OVERLAPED TOOTHED LOCK TIGHTENNING WASHER. PRODUCT GRADE A.) |
| NF E25-133-1987 |
緊固件.螺桿千斤頂用的金屬螺釘.短六角頭長制動端螺釘.Ａ和Ｂ級.符號ＨＺ |
(Fasteners. Screws for screw-jacks. Small hexagon head screws with long dog point. Product grades A and B. Symbol HZ.) |
| NF E25-134-1987 |
緊固件.螺桿千斤頂用的金屬螺釘.短方頭短制動端螺釘.Ａ和Ｂ級.符號ＱＺ |
(Fasteners. Screws for screw-jacks. Small square head screws with short dog point. Product grades A and B. Symbol QZ.) |
| NF E25-136-1986 |
緊固件.螺桿.A和B級產品 |
(Fasteners. Threaded rods. Product grades A and B.) |
| NF E25-139-1987 |
緊固件.金屬用螺釘.Ｚ十字槽寬凸圓柱形頭.Ａ級.符號ＣＢＬＺＳ |
(FASTENERS. SCREWS. Z CROSS RECESSED AND SLOTTED PAN HEAD. GRADE A. SYMBOL CBL ZS.) |
| NF E25-140-1994 |
緊固件.電弧焊接雙端螺栓.符號SA.尺寸和物理化學特性.拉制電弧焊接螺栓系統 |
(FASTENERS. ARC WELDING STUDS LOADING. SYMBOL SA. DIMENSIONS AND PROPERTIES PHYSICAL-CHIMICAL. DRAWN ARC STUD WELDING SYSTEM.) |
| NF E25-142-1991 |
緊固件.電阻焊金屬螺釘.縮小頭 |
(FASTENERS. RESISTANCE WELDING SCREWS. REDUCED HEAD. SYMBOL Z. SR.) |
| NF E25-143-1991 |
緊固件.電容器電焊全螺紋螺柱 |
(FASTENERS. WELDINGSTUDS BY CONDENSOR DISCHARGE. SYMBOL SD.) |
| NF E25-144-1991 |
緊固件.電弧焊全螺紋螺柱 |
(FASTENERS. ENTIRELY THREADED ARC WELDING STUDS. SYMBOL SF.) |
| NF E25-145-1991 |
緊固件.電弧焊不完全螺紋螺柱 |
(FASTENERS. PARTIALLY THREADED ARC WELDING STUDS. SYMBOL SF.) |
| NF E25-149-1998 |
十字槽圓頭螺釘 |
(CROSS RECESSED CHEESE HEAD SCREWS. (EUROPEAN STANDARD EN ISO 7048).) |
| NF E25-150-1998 |
帶平墊圈的螺釘和墊圈組件.墊圈強度等級為200 HV和300 HV. |
(Screw and washer assemblies with plain washers. Washer hardness classes 200 HV and 300 HV.) |
| NF E25-151-2001 |
米制細牙螺紋的六角頭螺釘.產品等級A和B |
(Hexagon head screws with metric fine pitch thread - Product grades A and B.) |
| NF E25-152-2001 |
米制細牙螺紋的六角頭螺栓.產品等級A和B |
(Hexagon head bolts with metric fine pitch thread - Product grades A and B.) |
| NF E25-160-1992 |
平端開槽調整螺釘 |
(SLOTTED SET SCEWS WITH FLAT POINT. (EUROPEAN STANDARD EN 24766).) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com