標準號 |
中文名稱 |
英文名稱 |
| NF A50-431-1995 |
鋁和鋁合金.烹調器具生產用圓坯料.規范 |
(Aluminium and aluminium alloys. Circle and circle stock for the production of culinary utensils. Specifications.) |
| NF A50-432-1997 |
鋁和鋁合金.通用盤繞涂層的薄板和帶材.規范 |
(ALUMINIUM AND ALUMINIUM ALLOYS. COIL COATED SHEET AND STRIP FOR GENERAL APPLICATIONS. SPECIFICATIONS. (EUROPEAN STANDARD EN 1396).) |
| NF A50-433-1997 |
鋁和鋁合金.踏腳板.規范(歐洲標準EN 1386) |
(ALUMINIUM AND ALUMINIUM ALLOYS. TREAD PLATE. SPECIFICATIONS. (EUROPEAN STANDARD EN 1386).) |
| NF A50-434-1-1998 |
鋁及鋁合金.一般用途再軋坯料.第1部分:熱軋制再軋坯料規范 |
(ALUMINIUM AND ALUMINIUM ALLOYS. REROLL STOCK FOR GENERAL APPLICATIONS. PART 1 : SPECIFICATIONS FOR HOT-ROLLED REROLL STOCK. (EUROPEAN STANDARD EN 12482-1).) |
| NF A50-434-2-1998 |
鋁及鋁合金.一般用途再軋坯料.第2部分:冷軋制再軋坯料規范 |
(ALUMINIUM AND ALUMINIUM ALLOYS. REROLL STOCK FOR GENERAL APPLICATIONS. PART 2 : SPECIFICATIONS FOR COLD-ROLLED REROLL STOCK. (EUROPEAN STANDARD EN 12482-2).) |
| NF A50-435-1996 |
鋁及鋁合金.試驗方法.板材和帶材的凸耳試驗 |
(ALUMINIUM AND ALUMINIUM ALLOYS. TEST METHODS. EARING TEST FOR SHEET AND STRIP. (EUROPEAN STANDARD EN 1669).) |
| NF A50-437-1995 |
鋁和鋁合金.罐頭、盒子和蓋子的軋制品 |
(Aluminium and aluminium alloys. Rolled products for cans, closures and lids. Specifications.) |
| NF A50-440-1996 |
鋁和鋁合金.薄金屬片.第1部分:檢驗和交貨的技術條件 |
(Aluminium and aluminium alloys. Foil. Part 1 : technical conditions for inspection and delivery.) |
| NF A50-441-1996 |
鋁和鋁合金.第2部分:機械性能 |
(Aluminium and aluminium alloys. Foil. Part 2 : mechanical properties.) |
| NF A50-442-1996 |
鋁和鋁合金.薄金屬片.第3部分:尺寸公差 |
(Aluminium and aluminium alloys. Foil. Part 3 : tolerances on dimensions.) |
| NF A50-443-1997 |
鋁和鋁合金.薄金屬片.第4部分:特性要求 |
(ALUMINIUM AND ALUMINIUM ALLOYS. FOILS. PART 4 : SPECIAL PROPERTY REQUIREMENTS. (EUROPEAN STANDARD EN 546-4).) |
| NF A50-452-1984 |
鋁和鋁合金.板狀或帶狀涂漆產品.特性 |
(Aluminium and aluminium alloys. Coil coating strip and sheet. Characteristics.) |
| NF A50-461-1996 |
鋁及鋁合金.散熱片坯料.第2部分:機械性能 |
(ALUMINIUM AND ALUMINIUM ALLOYS. FINSTOCK. PART 2 : MECHANICAL PROPERTIES. (EUROPEAN STANDARD EN 683-2).) |
| NF A50-462-1996 |
鋁及鋁合金.散熱片坯料.第3部分:尺寸和形狀公差 |
(ALUMINIUM AND ALUMINIUM ALLOYS. FINSTOCK. PART 3 : TOLERANCES ON DIMENSIONS AND FORM. (EUROPEAN STANDARD EN 683-3).) |
| NF A50-470-1-2003 |
鋁和鋁合金.結構性鐵路設施用制品.檢查和交貨的技術條件.第1部分:擠壓制品 |
(Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 1 : extruded products.) |
| NF A50-506-1982 |
鋁和鋁合金.用滾壓機和壓彎機冷成形型材.一般特性 |
(Aluminium and aluminium alloys. Cold formed sections produced by cold rolling and by bending. General characteristics.) |
| NF A50-510-1994 |
鋁和鋁合金.從鍛制產品中獲取的沖擊擠壓加工用鋁塊.規范 |
(Aluminium and aluminium alloys. Impact extrusion slugs obtained from wrought products. Specifications.) |
| NF A50-600-1994 |
鋁和鋁合金.適于擠壓的擠壓鑄坯 |
(ALUMINIUM AND ALUMINIUM ALLOYS. EXTRUSION INGOTS. SPECIFICATIONS. (EUROPEAN STANDARD EN 486).) |
| NF A50-616-1998 |
鋁和鋁合金.冷拉棒/棍和管.第7部分:無縫管.尺寸,公差和形狀(歐洲標準EN754-7) |
(Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Part 7 : seamless tubes, tolerances on dimensions and form.) |
| NF A50-617-1998 |
鋁及鋁合金.冷拔棒材/條材和管材.第8部分:多孔拉拔管尺寸和形狀公差 |
(ALUMINIUM AND ALUMINIUM ALLOYS. COLD DRAWN ROD/BAR AND TUBE. PART 8 : PORTHOLE TUBES, TOLERANCES ON DIMENSIONS AND FORM. (EUROPEAN STANDARD EN 754-8).) |
| NF A50-620-2004 |
鋁及鋁合金.通用冷拉制圓盤管.規范 |
(Aluminium and aluminium alloys - Cold drawn, round, coiled tube for general applications - Specification.) |
| NF A50-632-1995 |
鋁和鋁合金.擠壓棒材/管材和型材.第三部分:擠壓圓形棒材.尺寸和形狀公差 |
(Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Part 3 : round bars, tolerances on dimensions and form.) |
| NF A50-633-1995 |
鋁和鋁合金.擠壓棒材/管材和型材.第四部分:擠壓方形條材尺寸和形狀和公差 |
(ALUMINIUM AND ALUMINIUM ALLOYS. EXTRUDED ROD/BAR, TUBE AND PROFILES. PART 4 : SQUARE BARS, TOLERANCES ON DIMENSIONS AND FORM. (EUROPEAN STANDARD EN 755-4).) |
| NF A50-634-1995 |
鋁和鋁合金.擠壓棒材/管材和型材.第五部分:擠壓矩形棒材. 尺寸和形狀公差 |
(Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Part 5 : rectangular bars, tolerances on dimensions and form.) |
| NF A50-635-1995 |
鋁和鋁合金.擠壓棒材,管材和型材.第六部分:擠壓六角形條材.尺寸和形狀公差 |
(Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Part 6 : hexagonal bars, tolerances on dimensions and form.) |
| NF A50-636-1999 |
鋁和鋁合金.擠壓棍棒,管和截面圖.第7部分:無縫管尺寸公差和形狀(歐洲標準EN755-7) |
(Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Part 7 : seamless tubes, tolerances on dimensions and form.) |
| NF A50-637-1998 |
鋁和鋁合金.擠壓棍/棒材,管和靠模.第8部分:鉆頭出水口管,尺寸和框架公差 |
(ALUMINIUM AND ALUMINIUM ALLOYS. EXTRUDED ROD/BAR, TUBE AND PROFILES. PART 8 : PORTHOLE TUBES, TOLERANCES ON DIMENSIONS AND FORM. (EUROPEAN STANDARD EN 755-8).) |
| NF A50-638-9-2001 |
鋁和鋁合金.擠制棒材/桿材、管及型材.第9部分:型材的尺寸和形狀公差 |
(Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9 : profiles, tolerances on dimensions and form.) |
| NF A50-640-1-2001 |
鋁及鋁合金.擠制合金EN AW-6060 and EN AW-6063精密型材.第1部分:檢驗和交貨技術條件 |
(Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1 : technical conditions for inspection and delivery.) |
| NF A50-640-2-2001 |
鋁及鋁合金.擠制合金EN AW-6060 and EN AW-6063精密型材.第2部分:尺寸和形狀公差 |
(Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2 : tolerances on dimensions and form.) |
| NF A50-645-2004 |
鋁及鋁合金.通用擠制圓盤管.規范 |
(Aluminium and aluminium alloys - Extruded round, coiled tube for general applications - Specification.) |
| NF A50-650-2-1997 |
鋁和鋁合金.擠壓棒材.電氣設備的特殊要求 |
(Aluminium and aluminium alloys. Drawing stock. Part 2 : specific requirements for electrical applications.) |
| NF A50-650-4-1997 |
鋁和鋁合金.擠壓棒材.焊接設備的特殊要求 |
(Aluminium and aluminium alloys. Drawing stock. Part 4 : specific requirements for welding applications.) |
| NF A50-701-1982 |
鋁和鋁合金.拉制線材.根據成分分類 |
(Aluminium and aluminium alloys. Extruded and drawn products. Division into groups according to chemical composition.) |
| NF A50-703-1984 |
鋁和鋁合金.拉制方形棒材.尺寸公差和推薦尺寸 |
(Aluminium and aluminium alloys. Square section extruded bars. Dimensional tolerances and recommended dimensions.) |
| NF A50-706-1987 |
鋁和鋁合金.Ｌ型截面拉制型材.尺寸公差和推薦尺寸 |
(Aluminium and aluminium alloys. Angles. Dimension and form tolerances.) |
| NF A50-707-1981 |
鋁和鋁合金.Ｉ型截面拉制型材.尺寸公差和推薦尺寸 |
(Aluminium and aluminium alloys. Extruded shapes : I beams. Tolerances and dimensions.) |
| NF A50-708-1982 |
鋁和鋁合金.Ｔ型截面拉制型材.尺寸公差和推薦尺寸 |
(Aluminium and aluminium alloys. Extruded shape : tees. Tolerances and dimensions.) |
| NF A50-709-1981 |
鋁和鋁合金.Ｕ型截面拉制型材.尺寸公差和推薦尺寸 |
(Aluminium and aluminium alloys. Extruded shapes ; channels. Tolerances and dimensions.) |
| NF A50-802-1988 |
鋁和鋁合金.大直徑焊接管.尺寸和公差 |
(ALUMINIUM AND ALUMINIUM ALLOYS. LARGE DIAMETER WELDED TUBES. DIMENSIONS AND TOLERANCES.) |
| NF A50-821-1971 |
鋁和鋁合金.冷滾軋成形型材.尺寸和尺寸公差 |
(ALUMINIUM AND ALUMINIUM ALLOYS. COLD FORMED SECTIONS PRODUCED BY COLD ROLLING. DIMENSIONS AND TOLERANCES.) |
| NF A50-825-1971 |
鋁和鋁合鋁.冷彎成形型材.尺寸公差 |
(ALUMINIUM AND ALUMINIUM ALLOYS. COLD FORMED SECTIONS OBTAINED BY BENDING. DIMENSION TOLERANCES.) |
| NF A50-910-1997 |
鋁及鋁合金.鑄鍛造坯料.第1部分:檢查和交貨技術條件(歐洲標準EN 604-1) |
(ALUMINIUM AND ALUMINIUM ALLOYS. CAST FORGING STOCK. PART 1 : TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY. (EUROPEAN STANDARD EN 604-1).) |
| NF A50-911-1997 |
鋁及鋁合金.鑄鍛造坯料.第2部分:尺寸和形狀公差(歐洲標準EN 604-2) |
(ALUMINIUM AND ALUMINIUM ALLOYS. CAST FORGING STOCK. PART 2 : TOLERANCES ON DIMENSIONS AND FORM. (EUROPEAN STANDARD EN 604-2).) |
| NF A50-920-1996 |
鋁及鋁合金.鍛造坯料.第1部分:檢驗和交貨的技術條件 |
(ALUMINIUM AND ALUMINIUM ALLOYS. WROUGHT FORGING STOCK. PART 1 : TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY. (EUROPEAN STANDARD EN 603-1).) |
| NF A50-921-1996 |
鋁及鋁合金.鍛造坯料.第2部分:機械性能 |
(ALUMINIUM AND ALUMINIUM ALLOYS. WROUGHT FORGING STOCK. PART 2 : MECHANICAL PROPERTIES. (EUROPEAN STANDARD EN 603-2).) |
| NF A50-922-2000 |
鋁及鋁合金.鍛造坯料.第3部分:尺寸和形狀公差 |
(Aluminium and aluminium alloys - Wrought forging stock - Part 3 : tolerances on dimensions and form.) |
| NF A50-931-1994 |
鍛鋁和鋁合金鍛件.第2部分:機械特性和附加特性要求 |
(Aluminium and aluminium alloys. Forgings. Part 2 : mechanical properties and additional property requirements.) |
| NF A50-932-3-2002 |
鋁和鋁合金.鍛造.第3部分:尺寸和形式公差 |
(Aluminium and aluminium alloys - Forgings - Part 3 : tolerances on dimensions and form.) |
| NF A51-050-1983 |
銅和合金.銅的分類 |
(Copper and alloys. Classification of coppers.) |
| NF A51-080-1991 |
形狀記憶合金.詞匯和測量 |
(SHAPE MEMORY ALLOYS (SMA). VOCABULARY AND MEASURES.) |
| NF A51-090-1999 |
銅及銅合金.帶材彈性彎折極限的測定 |
(Copper and copper alloys. Determination of spring bending limit on strip.) |
| NF A51-102-1999 |
銅和銅合金.熱交換器用的無縫圓管 |
(Copper and copper alloys. Seamless, round tubes for heat exchangers.) |
| NF A51-103-1999 |
銅和銅合金.無縫銅毛圓管 |
(Copper and copper alloys. Seamless, round copper capillary tubes.) |
| NF A51-118-1998 |
銅和銅合金.銅拉制桿材(線材) |
(Copper and copper alloys - Copper drawing stock (wire rod).) |
| NF A51-120-1996 |
銅和銅合金.無縫的.應用于環境衛生和加熱的水和氣體的圓形銅管( 歐洲標準EN1057) |
(Copper and copper alloys. Seamless, round copper tubes for water and gas in sanitary and heating applications.) |
| NF A51-121-2003 |
銅和銅合金.帶固體覆層的預絕緣銅管 |
(Copper and copper alloys - Pre-insulated copper tubes with solid covering.) |
| NF A51-125-1999 |
銅及銅合金.一般用途的無縫圓管 |
(Copper and copper alloys - Seamless, round tubes for general purposes.) |
| NF A51-126-1-2001 |
銅和銅合金.空氣調節和制冷用無縫圓形銅管.第1部分:管道系統用管 |
(Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Part 1 : tubes for piping systems.) |
| NF A51-126-2-2001 |
銅和銅合金.空氣調節和制冷用無縫圓形銅管.第2部分:設備用管 |
(Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Part 2 : tubes for equipment.) |
| NF A51-127-2001 |
銅和銅合金.醫用氣體或真空用的無縫圓銅管 |
(Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum.) |
| NF A51-128-2002 |
銅和銅合金.電器用無縫銅管 |
(Copper and copper alloys - Seamless copper tubes for electrical purposes.) |
| NF A51-129-1999 |
銅和銅合金.熱交換器用無縫軋制翅翼管 |
(Copper and copper alloys - Rolled, finned seamless tubes for heat exchangers.) |
| NF A51-201-1998 |
銅和銅合金.一般用途的板材、薄板、帶材和圓材 |
(Copper and copper alloys - Plate, sheet, strip and circles for general purposes.) |
| NF A51-202-1998 |
銅和合金銅.煮水器,壓力容器和熱水貯存器用的盤狀,片狀,帶狀,和環狀銅和銅合金 |
(Copper and copper alloys. Plate, sheet and circles for boilers, pressure vessels and hot water storage units.) |
| NF A51-202/A1-2000 |
銅和合金銅.煮水器、壓力容器和熱水貯存器用的板狀、片狀和環狀銅和銅合金 |
(Copper and copper alloys - Plate, sheet and circles for boilers, pressure vessels, and hot water storage units.) |
| NF A51-203-1998 |
銅和銅合金.彈簧和連接器用帶材 |
(Copper and copper alloys - Strip for springs and connectors.) |
| NF A51-204-1998 |
銅和銅合金.導架用帶材 |
(Copper and copper alloys - Strip for lead frames.) |
| NF A51-205-2002 |
銅及銅合金.熱浸鍍錫帶 |
(Copper and copper alloys - Hot-dip tinned strip.) |
| NF A51-300-1997 |
銅及銅合金.一致性聲明 |
(Copper and copper alloys. Declarations of conformity.) |
| NF A51-301-1998 |
銅和銅合金.一般用途棒材 |
(Copper and copper alloys - Rod for general purposes.) |
| NF A51-302-1998 |
銅和銅合金.切削加工用棒 |
(Copper and copper alloys - Rod for free machining purposes.) |
| NF A51-302/A1-2002 |
銅和銅合金.高速切削用棒材 |
(Copper and copper alloys - Rod for free machining purposes.) |
| NF A51-303-1998 |
銅和銅合金.可鍛和未鍛的鍛料 |
(Copper and copper alloys - Wrought and unwrought forging stock.) |
| NF A51-304-1998 |
銅和銅合金.一般用途線材 |
(Copper and copper alloys - Wire for general purposes.) |
| NF A51-305-1998 |
銅和銅合金.一般用途型材和矩形棒材 |
(Copper and copper alloys - Profiles and rectangular bar for general purposes.) |
| NF A51-306-1998 |
銅和銅合金.切削加工用空心棒 |
(Copper and copper alloys - Hollow rod for free machining purposes.) |
| NF A51-306/A1-2002 |
銅和銅合金.高速切削用中空棒材 |
(Copper and copper alloys - Hollow rod for free machining purposes.) |
| NF A51-307-2003 |
銅和銅合金.焊接和釬焊用棒材和線材 |
(Copper and copper alloys - Rod and wire for welding and braze welding.) |
| NF A51-309-2002 |
銅和銅合金.生產電導體用拉制圓銅絲 |
(Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors.) |
| NF A51-310-2002 |
銅和銅合金.電子管、半導體器件和真空設施用高傳導性的銅制產品 |
(Copper and copper alloys - Products of high conductivity copper for electronic tubes, semiconductor devices and vacuum applications.) |
| NF A51-311-2002 |
銅和銅合金.電氣設備用銅制型材和異型金屬絲 |
(Copper and copper alloys - Copper profiles and profiled wire for electrical purposes.) |
| NF A51-430-1996 |
銅和銅合金.建筑用薄板及帶材(歐洲標準EN 1172) |
(COPPER AND COPPER ALLOYS. SHEET AND STRIP FOR BUILDING PURPOSES. (EUROPEAN STANDARD EN 1172).) |
| NF A51-600-1999 |
銅及銅合金.廢鋼 |
(COPPER AND COPPER ALLOYS. SCRAP. (EUROPEAN STANDARD EN 12861).) |
| NF A53-702-2003 |
銅和銅合金.主合金 |
(Copper and copper alloys - Master alloys.) |
| NF A53-704-1998 |
銅和銅合金.銅陰極(歐洲標準EN 1978) |
(COPPER AND COPPER ALLOYS. COPPER CATHODES. (EUROPEAN STANDARD EN 1978).) |
| NF A53-705-1999 |
銅和銅合金.鑄塊和鑄件 |
(Copper and copper alloys - Ingots and castings.) |
| NF A53-706-1998 |
銅和銅合金.鑄造未最后成形銅產品(歐洲標準EN 1976) |
(COPPER AND COPPER ALLOYS. CAST UNWROUGHT COPPER PRODUCTS. (EUROPEAN STANDARD EN 1976).) |
| NF A54-100-1995 |
精制鎳 |
(REFINED NICKEL.) |
| NF A54-101-1974 |
鎳和鎳合金.非合金鎳軋制產品 |
(NICKEL AND NICKEL ALLOYS. ROLLED PRODUCTS IN NON-ALLOYED NICKEL.) |
| NF A54-301-1973 |
鎳和鎳合金.具有延伸特征的鐵鎳合金 |
(NICKEL AND NICKEL ALLOYS. IRON-NICKEL ALLOYS WITH PARTICULAR DILATABILITY.) |
| NF A54-401-1973 |
鎳和鎳合金.鎳鉬合金與鎳鉬鉻合金 |
(NICKEL AND NICKEL ALLOYS. NICKEL-MOLYBDENUM AND NICKEL-MOLYBDENUM-CHROMIUM-ALLOYS.) |
| NF A55-105-1980 |
鉛錠 |
(LEAD IN INGOTS.) |
| NF A55-110-2003 |
鋅和鋅合金.初級鋅 |
(Zinc and zinc alloys - Primary zinc.) |
| NF A55-111-2003 |
鋅和鋅合金.二次利用的鋅 |
(Zinc and zinc alloys - Secondary zinc.) |
| NF A55-112-1998 |
鋅和鋅合金.取樣方法.規范 |
(ZINC AND ZINC ALLOYS. METHOD OF SAMPLING. SPECIFICATIONS. (EUROPEAN STANDARD EN 12060).) |
| NF A55-210-1996 |
鋅及鋅合金.建筑物用軋制平板制品規范 |
(Zinc and zinc alloys. Specifications for rolled flat products for building.) |
| NF A55-300-1997 |
鋅和鋅合金.鋅合金壓制鑄件.鑄塊和液體 |
(Zinc and zinc alloys. Alloys for foundry purposes. Ingot and liquid.) |
| NF A55-999-2003 |
鉛和鉛合金.廢料.術語和定義 |
(Lead and lead alloys - Scraps - Terms and definitions.) |
| NF A56-101-1985 |
減摩作用白合金錠.特性 |
(ANTIFRICTION ALLOY INGOTS. CHARACTERISTICS.) |
| NF A56-102-1995 |
錫及錫合金.錫錠 |
(TIN AND TIN ALLOYS. INGOT TIN. (EUROPEAN STANDARD EN 610).) |
| NF A56-103-1-1995 |
錫及錫合金.鉛錫合金和鉛錫合金器皿.第1部分:鉛錫合金 |
(Tin and tin alloys. Pewter and pewterware. Part 1 : pewter.) |
| NF A56-103-2-1996 |
錫及錫合金.鉛錫合金和鉛錫合金器皿.第2部分:鉛錫合金器皿 |
(TIN AND TIN ALLOYS. PEWTER AND PEWTERWARE. PART 2 : PEWTERWARE. (EUROPEAN STANDARD EN 611-2).) |
| NF A57-100-1994 |
鑄鋁合金.用于生產與食品接觸的材料和物品的金屬的化學成分 |
(Aluminium and aluminium alloys. Castings. Chemical composition of castings for use in contact with food.) |
| NF A57-110-1995 |
鋁和鋁合金.液體金屬.規范 |
(ALUMINIUM AND ALUMINIUM ALLOYS. LIQUID METAL. SPECIFICATIONS. (EUROPEAN STANDARD EN 577).) |
| NF A57-130-1996 |
鋁及鋁合金.冶煉用合金錠.規范(歐洲標準EN 1676) |
(Aluminium and aluminium alloys. Alloyed ingots for remelting. Specifications.) |
| NF A57-140-1995 |
鋁和鋁合金.通過熔化制造的母合金.規范 |
(Aluminium and aluminium alloys. Master alloys produced by melting. Specifications.) |
| NF A57-220-1998 |
鋁和鋁合金.鑄件.化學成分和機械性能(歐洲標準EN 1706) |
(Aluminium and aluminium alloys. Castings. Chemical composition and mechanical properties.) |
| NF A57-501-1998 |
鎂和鎂合金.鑄造陽極用鎂合金 |
(Magnesium and magnesium alloys. Magnesium alloys for cast anodes.) |
| NF A57-502-1998 |
鎂和鎂合金.非合金鎂 |
(Magnesium and magnesium alloys. Unalloyed magnesium.) |
| NF A58-002-1999 |
鉛及鉛合金.電纜護套和套筒用鉛合金錠 |
(Lead and lead alloys - Lead alloys ingots for electric cable sheathing and for sleeves.) |
| NF A58-003-1999 |
鉛及鉛合金.建筑物用薄鉛板 |
(Lead and lead alloys. Rolled lead sheet for building purposes.) |
| NF A58-004-2000 |
鉛及鉛合金.鉛氧化物 |
(Lead and lead alloys - Lead oxides.) |
| NF A65-767-1981 |
鎂合金制半成品.Ｕ形型材.尺寸公差和推薦尺寸 |
(Semi-finished products made of magnesium alloys. U-sections. Tolerances on dimensions and recommended dimensions.) |
| NF A66-001-1985 |
鑄造產品.有色金屬和合金.重力、低壓和減壓模鑄件的尺寸公差 |
(Foundry products. Non ferrous metal and alloys. Cast products. Dimensional tolerances for gravity die castings, low pressure die castings and depression die castings.) |
| NF A66-002-1985 |
鑄造產品.鋁合金和鋅合金.壓力鑄件的尺寸公差 |
(Foundry products. Aluminium alloys and zinc alloys. Cast products. Dimensional tolerances for pressure die castings.) |
| NF A70-010-1993 |
珠寶.戒指尺寸.定義、測量和名稱與符號 |
(Jewellery. Ring-sizes. Definition, mesurage et designations.) |
| NF A70-020-1993 |
珠寶.貴金屬合金的純度 |
(JEWELLERY. FINENESS OF PRECIOUS METAL ALLOYS. (EUROPEAN STANDARD EN 29202).) |
| NF A70-021-2001 |
貴金屬.與貴金屬珠寶合金一起使用的釬料的精細度 |
(Precious metals - The finenesses of solders used with precious metal jewellery alloys.) |
| NF A72-115-1966 |
高爐附件.熱風閥.閥蓋和底座（PN6） |
(BLAST FURNACE ACCESSORIES. HOT AIR VALVES. DISCS AND SEATS,PN 6.) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com