標準號 |
中文名稱 |
英文名稱 |
| DIN 65355-1987 |
航空和航天.閉合環.公制系列.鋁可塑合金制 |
(Aerospace; collars, metric series, wrought aluminium alloy) |
| DIN 65356-1-1988 |
航空和航天.芳香族的尼龍(芳族).高強度芳族長絲紗.尺寸.質量 |
(Aerospace; aromatic polyamide (aramid); high tenacity aramid filament yarns; dimensions, masses) |
| DIN 65356-2-1988 |
航空和航天.芳香族的尼龍(芳族).高強度芳族長絲紗.交貨技術要求 |
(Aerospace; aromatic polyamide (aramid); high tenacity aramid filament yarns; technical specification) |
| DIN 65359-1990 |
航空和航天.1-4芯.600V.105℃絕緣屏蔽.銅芯屏蔽線.交貨技術條件.不用于新結構 |
(Aerospace; shielded electrical cables, copper conductors, insulated shield, one to four conductors, 600 V, 105 C; technical specification) |
| DIN 65360-1992 |
航空和航天.滾子鏈.交貨技術條件 |
(Aerospace; roller chains; technical specification) |
| DIN 65363-1987 |
航空和航天.操作桿的安全墊 |
(Aerospace; lock washers for flight control rods) |
| DIN 65364-1991 |
航空和航天.可調操作桿的叉頭.不適于新結構 |
(Aerospace; single fork ends for adjustable control rods) |
| DIN 65365-1991 |
航空和航天.可調操作桿的雙叉頭.不適于新結構 |
(Aerospace; double fork ends for adjustable control rods) |
| DIN 65367-1987 |
航空和航天.管道線路用定距器 |
(Aerospace; spacer for tube assemblies) |
| DIN 65368-1987 |
航空和航天.軟繩.尺寸.質量 |
(Aerospace; lacing cords; dimensions, masses) |
| DIN 65369-1991 |
航空和航天.25A.5和11極插座 |
(Aerospace; sockets, five- and eleven-pole 25 Amp) |
| DIN 6537-1993 |
臺階式直柄整體硬質合金麻花鉆.尺寸 |
(Solid-hardmetall twist drills with stepped parallel shank; dimensions) |
| DIN 65370-1991 |
航空和航天.5A.8和14極插座 |
(Aerospace; sockets, eight- and fourteen-pole 5 Amp) |
| DIN 65371-1992 |
航空和航天.10A.5極和11極的插座 |
(Aerospace; sockets, five- and eleven-pole, 10 Amp) |
| DIN 65373-1989 |
航空和航天.聚酰胺(PA)的半成品和成型件.交貨技術條件 |
(Aerospace; polyamide (PA) semi-finished products and moulded parts; technical specification) |
| DIN 65374-1989 |
航空和航天.聚四氟乙烯.(PTFE)半成品和成型件.交貨技術條件 |
(Aerospace; polytetrafluoroethylene (PTFE) semi-finished products and moulded parts; technical specification) |
| DIN 65375-1989 |
航空和航天.纖維增強塑料.單向層壓制品的檢驗.與纖維方向垂直的壓力試驗 |
(Aerospace; fiber reinforced plastics; testing of unidirectional laminates; compression test transverse to fiber direction) |
| DIN 65378-1989 |
航空和航天.纖維增強塑料.單向層壓制品的檢驗.與纖維方向垂直的拉力試驗 |
(Aerospace; fiber reinforced plastics; testing of unidirectional laminates; tensile test transverse to fiber direction) |
| DIN 65379-1992 |
航空和航天.鎳合金制100℃沉頭鉚釘 |
(Aerospace; rivets, countersunk 100, nickel alloys) |
| DIN 6538-1-1993 |
加強直柄硬質合金制鑲刃麻花鉆 |
(Twist drills with hardmetal cutting edges with reinforced parallel shank; dimensions) |
| DIN 65382-1988 |
航空和航天.塑料用加強纖維.浸漬線試樣的拉力試驗 |
(Aerospace; reinforcement fibres for plastics; tensile test of impregnated yarn test specimens) |
| DIN 65383-1997 |
航空和航天.建筑結構用熱固環氧樹脂紡織玻璃纖維制長絲織物預浸漬體.技術規范 |
(Aerospace - Thermosetting epoxy woven glass filament fabric preimpregnated for structural applications - Technical specification) |
| DIN 65385-1991 |
航空和航天.流體技術.液壓.過濾器件.檢驗證明 |
(Aerospace; hydraulic fluid power; filter elements; reporting of test data) |
| DIN 65389-1996 |
航空和航天.冷軋鋼板.尺寸.質量 |
(Aerospace - Cold-rolled steel sheet - Dimensions, masses) |
| DIN 6539-1991 |
帶圓柱形直柄的整體硬質合金麻花鉆.尺寸 |
(Solid hardmetal twist drills with continuous parallel shank; dimensions) |
| DIN 65390-1989 |
航空和航天.熱軋鋼板和偏鋼.尺寸.質量 |
(Aerospace; hot-rolled steel sheet and plate; dimensions, masses) |
| DIN 65391-2002 |
航空航天.等級為:1100MPa/315C/425鳦的耐腐蝕鋼的帶MJ螺紋的自鎖加壓螺母 |
(Aerospace - Press nuts with MJ thread, self-locking, corrosion-resisting steel; Classification: 1100 MPa/315 鳦/425 鳦) |
| DIN 65392-2002 |
航空航天.等級為:1100MPa/235鋼制沉孔帶MJ螺紋的自鎖加壓螺母 |
(Aerospace - Press nuts with MJ thread, self-locking, floating, steel; Classification: 1100 MPa/235 鳦) |
| DIN 65393-2002 |
航空航天.分類為:900MPa/1100MPa/1250MPa/1550MPa/235鳦的鋼制帶保護環的鎖緊螺母和帶MJ螺紋的螺絲接頭. |
(Aerospace - Thread inserts with MJ thread, ring locked, screw-locking, steel; Classification: 900 MPa/1100 MPa/1250 MPa/1550 MPa/235 鳦) |
| DIN 65394-1995 |
航空航天.耐腐蝕鋼制帶保護環的鎖緊螺母和帶MJ螺紋的螺紋接頭.等級900MPa1100MPa1250MPa1500MPa315℃425425 |
(Aerospace - Thread inserts with MJ thread, ring locked, screw-locking, corrosion-resisting steel - Class: 900 MPa/1100 MPa/1250 MPa/1550 MPa/315 鳦/425 鳦) |
| DIN 65395-1989 |
航空和航天.鋼制帶環鎖緊環和MJ螺紋的螺柱.公稱抗張強度900Mpa.溫度235℃以下 |
(Aerospace; studs with MJ thread, ring locked, steel; nominal tensile strength 900 MPa, for temperatures up to 235 C) |
| DIN 65396-1989 |
航空和航天.不銹鋼環鎖緊和MJ螺紋的螺柱.公稱抗拉強度1250MPa.溫度425℃以下 |
(Aerospace; studs with MJ thread, ring locked, corrosion resisting steel, nominal tensile strength 1250 Mpa, for temperatures up to 425 C) |
| DIN 65397-1990 |
航空航天.帶MJ螺紋的閉鎖、螺釘鎖緊的不銹鋼制螺紋插頭.等級:1100MPa/315℃/425℃ |
(Aerospace; thread inserts with MJ thread, locked, screw-locking, corrosion-resisting steel; class: 1100 MPa/315 鳦/425 鳦) |
| DIN 65398-1990 |
航空航天.帶MJ螺紋的閉鎖、螺釘鎖緊的耐腐蝕鋼制螺紋插頭.等級:900MPa/1100MPa/315℃ |
(Aerospace; thread inserts with MJ-thread, locked, screw-locking, corrosion-resisting steel; class: 900 MPa/1100 MPa/315 鳦) |
| DIN 65399-1988 |
航空和航天.鋁合金100℃沉頭鉚釘 |
(Aerospace; rivets, countersunk 100, wrought aluminium alloys) |
| DIN 6540-1-1993 |
符合DIN6537和DIN6539的整體硬質合金麻花鉆的交貨技術條件.要求 |
(Technical delivery conditions for solid hardmetal twist drills according to DIN 6537 and DIN 6539; requirements) |
| DIN 6540-2-1993 |
符合DIN6537和DIN6539的整體硬質合金麻花鉆的交貨技術條件.檢驗 |
(Technical delivery conditions for solid hardmetal twist drills according to DIN 6537 and DIN 6539; inspection) |
| DIN 65422-1-1981 |
航空和航天.閃光報警燈 |
(Aerospace; anti-collision beacon light units) |
| DIN 65422-2-1985 |
航空和航天.閃光報警燈.交貨技術條件 |
(Aerospace; anti-collision light; technical specification) |
| DIN 65423-1981 |
航空和航天.光發射φ100mm的探照燈 |
(Aerospace; spotlights with 100 mm effective diameter) |
| DIN 65424-1981 |
航空和航天.光發射φ134mm的探照燈 |
(Aerospace; spotlights with 134 mm effective diameter) |
| DIN 65426-1-1985 |
航空和航天.芳族聚酰胺.高模量長絲紗織物-預浸漬體.尺寸.質量 |
(Aerospace; aromatic polyamide (Aramid); pre-impregnated woven fabric of high modulus filament yarn (Prepreg); dimensions, masses) |
| DIN 65426-2-1989 |
航空和航天.芳族聚酰胺.高模量長絲織物和EP-樹脂預浸漬長絲織物.交貨技術條件 |
(Aerospace; aromatic polyamide (aramid); woven filament fabric prepreg from high-modulus filament yarn and epoxy resin; technical specification) |
| DIN 65427-1-1984 |
航空和宇航.芳族聚酰胺.高模量長絲紗織物.尺寸.質量 |
(Aerospace; aromatic polyamide (aramid); fabric of high modulus filament yarn; dimensions, masses) |
| DIN 65427-2-1991 |
航空和航天.芳香族聚酰胺.高模量長絲紗織物.交貨技術條件 |
(Aerospace; aromatic polyamide (aramid); fabric woven from high-modulus filament yarn; technical specification) |
| DIN 65428-1987 |
航空和航天.帶凸頭的連接件用壁厚為0.25mm套筒 |
(Aerospace; sleeves; wall thickness 0,25 mm, for fasteners with protruding head) |
| DIN 65429-2002 |
航空航天.帶凸頭的緊固件用壁厚為0.5mm套筒 |
(Aerospace - Sleeves, wall thickness 0,5 mm, for fasteners with protruding head) |
| DIN 65430-2002 |
航空航天.帶埋頭的緊固件用壁厚為0.25mm套筒 |
(Aerospace - Sleeves, wall thickness 0,25 mm, for fasteners with countersunk head) |
| DIN 65431-2002 |
航空航天.帶埋頭的緊固件用壁厚為0.5mm套筒 |
(Aerospace - Sleeves, wall thickness 0,5 mm, for fasteners with countersunk head) |
| DIN 65433-2002 |
航空航天.帶減徑埋頭的緊固件用壁厚為0.25mm套筒 |
(Aerospace - Sleeves, wall thickness 0,25 mm, for fasteners with reduced countersunk head) |
| DIN 65434-1987 |
航空和航天.帶減徑埋頭的連接件用壁厚為0.5mm套筒 |
(Aerospace; sleeves; wall thickness 0,5 mm, for fasteners with reduced countersunk head) |
| DIN 65435-1989 |
航空和航天.連接件用套管.技術交貨條件 |
(Aerospace; sleeves for fasteners; technical specification) |
| DIN 65436-1989 |
航空和航天；鈦和鈦合金的標準質量(STQ)和鑒別質量(DQ).要求和檢驗 |
(Aerospace; standard quality (STQ) and disc quality (DQ) of titanium and titanium alloys; requirements and tests) |
| DIN 65438-1993 |
航空和航天.鈦合金.短螺紋.額定抗拉強度1100MPa.溫度315℃以下具有MJ螺紋的十二角頭配合螺栓 |
(Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, short thread length, in titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 C) |
| DIN 65439-1984 |
航空和航天.MJ螺紋的十二角頭緊公差螺釘.鋼制中等長度螺紋.額定抗拉強度1250MPa.溫度可達235℃ |
(Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, medium thread length, in steel, nominal tensile strength 1250 MPa, for temperatures up to 235 C) |
| DIN 65440-1984 |
航空和航天.MJ螺紋的十二角頭緊公差螺釘.不銹鋼制中等長度螺紋.額定抗拉強度1250MPa.溫度可達315℃ |
(Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, medium thread length, in corrosion resisting steel, nominal tensile strength 1250 MPa, for temperatures up to 315 C) |
| DIN 65441-1984 |
航空和航天.MJ螺紋的十二角頭緊公差螺釘.鋼制中等長度螺紋.額定抗拉強度1550MPa.溫度可達235℃ |
(Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, medium thread length, in steel, nominal tensile strength 1550 MPa, for temperatures up to 235 C) |
| DIN 65442-1993 |
航空和航天.耐蝕鎳合金.中長螺紋.額定抗拉強度1550MPa.溫度315℃以下具有MJ螺紋的十二角頭配合螺栓 |
(Aerospace; bihexagonal head bolts, close tolerance, with medium-length MJ thread, corrosion resisting nickel alloy; nominal tensile strength 1550 MPa, for temperatures up to 315 C) |
| DIN 65443-1984 |
航空和航天.MJ螺紋的十二角頭緊公差螺釘.不銹鋼制中等長度螺紋.溫度可達235℃.抗拉強度額定值為1800MPa |
(Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, medium thread length, in steel, nominal tensile strength 1800 MPa, for temperatures up to 235 C) |
| DIN 65444-1993 |
航空和航天.米制系列100°沉頭鎳合金鉚釘 |
(Aerospace; rivets, 100 countersunk head, nickel alloy, metric series) |
| DIN 65445-1987 |
航空和航天.公制系列.鎳合金制.減輕埋頭鉚釘100° |
(Aerospace; rivets, 100 reduced countersunk head, metric series, nickel alloys) |
| DIN 65446-1993 |
航空和航天.米制系列通用頭鎳合金鉚釘 |
(Aerospace; rivets, universal head, nickel alloys, metric series) |
| DIN 65448-1988 |
航空和航天.結構粘合劑.楔劈試驗 |
(Aerospace; structural adhesives; wedge test) |
| DIN 65451-1990 |
航空航天.帶MJ螺紋的閉鎖、螺釘鎖緊的鋼制螺紋插頭.等級:900MPa/1100MPa/235℃ |
(Aerospace; thread inserts with MJ thread, locked, screw-locking, steel; class: 900 MPa/1100 MPa/235 鳦) |
| DIN 65452-1988 |
航空和航天.光束有效直徑為100.134和200mm的探照燈.交貨技術條件 |
(Aerospace; spotlights with 100 mm, 134 mm and 200 mm effective diameter; technical specification) |
| DIN 65453-1993 |
航空和航天.碳素纖維和雙馬來酰亞胺樹脂或聚酰亞胺樹脂制單向浸漬體 |
(Aerospace; preimpregnated unidirectional sheet of carbon fibres and bismaleinimide- or polyimide resin; technical specification) |
| DIN 65454-1988 |
航空和航天.合頁鋁或不銹鋼制擠壓成型的合頁生產中的半合頁和合頁.輕系列 |
(Aerospace; hinges, extruded, in aluminium and corrosion-restisting steel; half-hinges and hinges in manufacturing lengths; light series) |
| DIN 65455-1990 |
航空和航天.鋼.鎳.鈦合金無縫管.超聲波檢驗 |
(Aerospace; seamless tubes in steel, nickel and titanium alloys; ultrasonic inspection) |
| DIN 65456-1987 |
航空和航天.帶接地孔操作桿用墊圈 |
(Aerospace; washers for flight control rods, with hole for bonding) |
| DIN 65457-1987 |
航空和航天.鋼板制套環.尺寸.測量 |
(Aerospace; thimbles, formed from steel; dimensions, masses) |
| DIN 65460-1988 |
航空和航天.鋁和鋁合金的酸洗.也適用于電阻焊后代號0100 |
(Aerospace; acid pickling of aluminium and aluminium alloys, also for resistance welding; code number 0100) |
| DIN 65464-1990 |
航空和航天.MJ螺紋帶鎖緊墊圈的鈦合金雙頭螺釘.315℃以下.額定抗拉強度1100Pa |
(Aerospace; studs with MJ thread, ring locked, titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 C) |
| DIN 65465-1993 |
航空和航天.鉚接用米制系列墊圈 |
(Aerospace; washers for rivet assemblies, metric series) |
| DIN 65466-1996 |
航空和航天.纖維增強塑料.單向層壓制品的檢驗.拉伸剪切強度和剪切模數的測定 |
(Aerospace - Fibre reinforced plastics - Testing of unidirectional laminates; Determination of shear strength and shear modulus in tension) |
| DIN 65467-1999 |
航空和航天.帶和不帶增強的反應性樹脂系統的檢驗.DSC方法 |
(Aerospace - Testing of thermosetting resin systems with and without reinforcement - DSC method) |
| DIN 65468-1991 |
航空和航天.噴丸清理.標識號0215 |
(Aerospace; abrasive cleaning; code number 0215) |
| DIN 65469-1992 |
航空和航天.纖維增強塑料.單層扁平拉伸試件的拉伸試驗 |
(Aerospace; fibre-reinforced plastics; tensile test of monolayer flat tension specimens) |
| DIN 65470-1989 |
航空和航天.金屬材料焊接用焊接填充金屬.交貨技術條件 |
(Aerospace; filler metals for welding metallic materials; technical specification) |
| DIN 65471-1991 |
航空和航天.鈦和鈦合金用焊接填料.焊條和焊絲.尺寸.質量 |
(Aerospace; filler metals for welding titanium and titanium alloys; filler rods and filler wires; dimensions, masses) |
| DIN 65473-1991 |
航空和航天.電解脫脂和凈化.標識號0030至0033 |
(Aerospace; electrolytic degreasing and cleaning; code numbers 0030 to 0033) |
| DIN 65474-1992 |
航空和航天.纖維增強塑料.熱脈沖激光尖鋒試驗 |
(Aerospace; fibre reinforced plastics; thermal-spike test method) |
| DIN 65480-1989 |
航空航天.耐腐蝕鋼制帶凸緣、自鎖定和MJ螺紋的六角螺母.等級:1100MPa/315℃ |
(Aerospace; hexagon nuts with flange and MJ thread, self-locking, corrosion-resisting steel; class: 1100 MPa/315 鳦) |
| DIN 65485-1993 |
航空和航天.結構用緊固件.旋轉緊固件的機械特性.緊固件組件 |
(Aerospace; fasteners for structural application; rotary fastener, mechanical properties; rotary fastener, assembly) |
| DIN 65486-1993 |
航空和航天.結構用緊固件.旋轉緊固件的機械特性.密封型緊固件總成 |
(Aerospace; fasteners for structural application; rotary fasteners, mechanical properties; rotary fastener, assembly, pressure-tight) |
| DIN 65487-1993 |
航空和航天.結構用緊固件.旋轉緊固件.沉頭鎖定銷釘 |
(Aerospace; fasteners for structural application; rotary fasteners; stud with countersunk head) |
| DIN 65488-1993 |
航空和航天.結構緊固件.旋轉緊固件.安裝尺寸 |
(Aerospace; fasteners for structural application; rotary fasteners; installation dimensions) |
| DIN 65489-1993 |
航空和航天.結構和非結構用緊固零件.旋轉緊固零件.沉頭墊片 |
(Aerospace; fasteners for structural and non-structural applications; rotary fasteners; countersunk washer) |
| DIN 65492-1993 |
航空和航天.結構緊固件.旋轉緊固件.旋轉緊固件插孔 |
(Aerospace; fasteners for structural application; rotary fasteners; receptacle) |
| DIN 65493-1993 |
航空和航天.結構緊固件.旋轉緊固件.壓力密封式旋轉緊固件插孔 |
(Aerospace; fasteners for structural application; rotary fasteners; receptacle, pressure-tight) |
| DIN 65494-101-1989 |
航空和航天.用于靜負荷凸頭鉚接的鉚釘計算值.單剪切.鉚釘材料3.1124公制系列 |
(Aerospace; rivet design values, static load, for protruding head rivet joints, single shear; rivet material 3.1124, metric series) |
| DIN 65494-102-1989 |
航空和航天.用于靜負荷凸頭鉚接的鉚釘計算值.單剪切.鉚釘材料3.1324.公制系列 |
(Aerospace; rivet design values, static load, for protruding head rivet joints, single shear; rivet material 3.1324, metric series) |
| DIN 65494-103-1989 |
航空和航天.用于靜負荷凸頭鉚接的鉚釘計算值.單剪切.鉚釘材料3.3354.公制系列 |
(Aerospace; rivet design values, static load, for protruding head rivet joints, single shear; rivet material 3.3354, metric series) |
| DIN 65494-105-1989 |
航空和航天.用于靜負荷凸頭鉚接的鉚釘計算值.單剪切.鉚釘材料2.4360.公制系列 |
(Aerospace; rivet design values, static load, for protruding head rivet joints, single shear; rivet material 2.4360, metric series) |
| DIN 65494-301-1989 |
航空和航天.用于靜力負荷凸頭鉚接的鉚釘計算值.雙剪切.鉚釘材料3.1124.公制系列 |
(Aerospace; rivet design values, static load, for protruding head rivet joints, double shear; rivet material 3.1124, metric series) |
| DIN 65494-302-1989 |
航空和航天.用于靜力負荷凸頭鉚接的鉚釘計算值.雙剪切.鉚釘材料3.1324.公制系列 |
(Aerospace; rivet design values, static load, for protruding head rivet joints, double shear; rivet material 3.1324, metric series) |
| DIN 65494-303-1989 |
航空和航天.用于靜力負荷凸頭鉚接的鉚釘計算值.雙剪切.鉚釘材料3.3354.公制系列 |
(Aerospace; rivet design values, static load, for protruding head rivet joints, double shear; rivet material 3.3354, metric series) |
| DIN 65494-305-1989 |
航空和航天.用于靜力負荷凸頭鉚接的鉚釘計算值.雙剪切.鉚釘材料2.4360.公制系列 |
(Aerospace; rivet design values, static load, for protruding head rivet joints, double shear; rivet material 2.4360, metric series) |
| DIN 65495-101-1989 |
航空和航天.用于靜力負荷沉頭鉚接的鉚釘計算值.單剪切.鉚釘材料3.1124.公制系列 |
(Aerospace; rivet design values, static load, for flush head rivet joints, single shear; rivet material 3.1124, metric series) |
| DIN 65495-102-1989 |
航空和航天.用于靜力負荷沉頭鉚接的鉚釘計算值.單剪切.鉚釘材料3.1324.公制系列 |
(Aerospace; rivet design values, static load, for flush head rivet joints, single shear; rivet material 3.1324, metric series) |
| DIN 65495-105-1989 |
航空和航天.用于靜力負荷沉頭鉚接的鉚釘計算值.單剪切.鉚釘材料2.4360.公制系列 |
(Aerospace; rivet design values, static load, flush head rivet joints, single shear; rivet material 2.4360, metric series) |
| DIN 65495-201-1990 |
航空和航天.用于靜力負荷沉頭鉚接的鉚接計算值.軋制單剪切鉚釘材料3.1124.公制系列 |
(Aerospace; rivet design values, static load, for flush head rivet joints, single shear, dimpled, rivet material 3.1124, metric series) |
| DIN 65495-202-1990 |
航空和航天.用于靜力負荷沉頭鉚接的鉚接計算值.軋制單剪切鉚釘材料3.1324.公制系列 |
(Aerospace; rivet design values, static load, for flush head rivet joints, single shear, dimpled, rivet material 3.1324, metric series) |
| DIN 65495-205-1990 |
航空和航天.用于靜力負荷沉頭鉚接的鉚接計算值.鉚釘材料2.4360.公制系列 |
(Aerospace; rivet design values, static load, for flush head rivet joints, single shear, dimpled, rivet material 2.4360, metric series) |
| DIN 65495-301-1989 |
航空和航天.用于靜力負荷鉚接的鉚釘計算值.雙剪切.鉚釘材料3.1124.公制系列 |
(Aerospace; rivet design values, static load, for flush heat rivet joints, double shear; rivet material 3.1124, metric series) |
| DIN 65495-302-1989 |
航空和航天.用于靜力負荷沉頭鉚接的鉚釘計算值.雙剪切.鉚釘材料3.1324.公制系列 |
(Aerospace; rivet design values, static load, for flush heat rivet joints, double shear; rivet material 3.1324, metric series) |
| DIN 65495-401-1990 |
航空和航天.用于靜力負荷沉頭鉚接的鉚接計算值.軋制雙剪切.鉚釘材料3.1124.公制系列 |
(Aerospace; rivet design values, static load, for flush head rivet joints, double shear, dimpled, rivet material 3.1124, metric series) |
| DIN 65495-402-1990 |
航空和航天.軋制雙面剪沉頭鉚接.靜負荷時的鉚接計算值.鉚釘材料3.1324.公制系列 |
(Aerospace; rivet design values, static load, for flush head rivet joints, double shear, dimpled, rivet material 3.1324, metric series) |
| DIN 65498-1991 |
航空和航天.聚醚亞胺半成品和模制件.交貨技術條件 |
(Aerospace; polyetherimide (PEI) semi-finished products and moulded parts; technical specification) |
| DIN 65500-1984 |
航空和航天.帶MJ螺紋鋁合金扁六角螺母 |
(Aerospace; nuts, hexagon, thin, with MJ-thread, aluminium alloy) |
| DIN 65501-2001 |
航空和航天.帶MJ螺紋的鉚接螺母的墊片 |
(Aerospace - Shims for anchor nuts with MJ-thread) |
| DIN 65502-1984 |
航空和航天.有肋條翼形十字槽和MJ螺紋的平頭螺紋.溫度可達425℃.額定抗拉強度700MPa |
(Aerospace; pan head bolts with ripped TORQ-SET (ACR) recess and MJ-thread, short thread, corrosion-resisting steel, nominal tensile strength 700 MPa, for temperatures up to 425 C) |
| DIN 65503-1984 |
航空航天.自鎖、氣密、雙耳和鋼制帶MJ螺紋的鉚接螺母.等級:900MPa.耐燃料性.-55至+120℃ |
(Aerospace; anchor nuts with MJ-thread, self-locking, pressure tight, two lug, steel, class: 900 MPa, fuel resistant, from -55 to +120 鳦) |
| DIN 65504-1989 |
航空航天.自鎖、氣密、雙耳、耐腐蝕鋼制帶MJ螺紋的鉚接螺母.等級:900MPa.對燃料的穩定性.-55至+120℃ |
(Aerospace; anchor nuts with MJ thread, self-locking, pressure tight, two lug, corrosion-resisting steel, fuel resistant, from - 55 to + 120 鳦) |
| DIN 65505-1984 |
航空航天.自鎖、氣密、雙耳、鋼制帶MJ螺紋鉚接螺母.等級900MPa.耐熱空氣.-55至+230℃ |
(Aerospace; anchor nuts with MJ-thread, self-locking, pressure tight, two lug, steel, class: 900 MPa, hot-air resistant, from -55 to +230 鳦) |
| DIN 65506-1989 |
航空航天.自鎖、氣密、雙耳、耐腐蝕鋼制帶MJ螺紋的鉚接螺母.等級:900MPa.耐空氣.-55至+230℃ |
(Aerospace; anchor nuts with MJ thread, self-locking, pressure tight, two lug, corrosions-resisting steel, air resistant, from - 55 to + 230 鳦) |
| DIN 65507-1986 |
航空航天.帶凸緣墊片和埋頭孔自鎖、鋼制帶MJ螺紋的六角螺母.等級:1100MPa/235DEGREES |
(Aerospace; nuts, hexagon, with MJ thread, captive washer and counterbore, self-locking, steel; class: 1100 MPa/235 鳦) |
| DIN 65508-1986 |
航空航天.帶凸緣墊片和埋頭孔、自鎖、耐腐蝕鋼帶MJ螺紋的六角螺母.等級:1100MPa/315℃/425℃ |
(Aerospace; nuts, hexagon, with MJ thread, captive washer and counterbore, self-locking, corrosion-resistant steel; class: 1100 MPa/315 鳦/425 鳦) |
| DIN 65509-1984 |
航空和航天.帶鋼制MJ螺紋的六角螺母.等級:1100MPa/235DEGREESC |
(Aerospace; nuts, hexagon, with MJ-thread, steel, class: 1100 MPa/235 C) |
| DIN 65510-1984 |
航空和航天.鋼制.帶MJ螺紋的扁六角螺母.等級:1100MPa/235DEGREESC |
(Aerospace; nuts, hexagon, thin, with MJ-thread steel, classification: 1100 MPa/235 C) |
| DIN 65515-1984 |
航空和航天.鈦合金制.短螺紋.有內鋸齒和MJ螺紋的圓柱頭螺釘.溫度315℃以下.額定抗拉強度1100MPa |
(Aerospace; cheese head bolts, with internal serration and MJ-thread, short thread, titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 C) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com