標準號 |
中文名稱 |
英文名稱 |
| DIN EN ISO 7384-1995 |
人造大氣環境的腐蝕試驗.一般要求 |
Corrosion test in artificial atmosphere - General requirements (ISO 7384:1986); German version EN ISO 7384:1995 |
| DIN EN ISO 7389-2004 |
房屋建筑.連接件.密封件的回彈性測定 |
|
| DIN EN ISO 7390-2004 |
房屋建筑.連接件.密封件的耐流動性測定 |
|
| DIN EN ISO 7391-1-1999 |
塑料.聚碳酸酯模塑和擠塑材料.第1部分:命名體系和基礎規范 |
Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 7391-1:1996); German version EN ISO 7391-1:1999 |
| DIN EN ISO 7391-2-1999 |
塑料.聚碳酸酯模塑和擠塑材料.第2部分:試樣制備和特性測定 |
Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7391-2:1996); German version EN ISO 7391-2:1999 |
| DIN EN ISO 7393-1-2000 |
水質.游離氯和氯的總含量測定.第1部分:使用N,N-二乙基-1,4-苯二胺的滴定法 |
Water quality - Determination of free chlorine and total chlorine - Part 1: Titrimetric method using N,N-diethyl-1,4-phenylenediamine (ISO 7393-1:1985); German version EN ISO 7393-1:2000 |
| DIN EN ISO 7393-2-2000 |
水質.游離氯和氯的總含量測定.第2部分:為常規控制目的使用N,N-二乙基-1,4-苯二胺的比色法 |
Water quality - Determination of free chlorine and total chlorine - Part 2: Colorimetric method using N,N-diethyl-1,4-phenylenediamine, for routine control purposes (ISO 7393-2:1985); German version EN ISO 7393-2:2000 |
| DIN EN ISO 7393-3-2000 |
水質.游離氯和氯的總含量測定.第3部分:測定氯總含量的碘量滴定法 |
Water quality - Determination of free chlorine and total chlorine - Part 3: Iodometric titration method for the determination of total chlorine (ISO 7393-3:1990); German version EN ISO 7393-3:2000 |
| DIN EN ISO 7405-1998 |
牙科學.牙科醫療設備生物分解性的疾病前評定.牙科材料的試驗方法 |
Dentistry - Preclinical evaluation of biocompatibility of medical devices used in dentistry - Test methods for dental materials (ISO 7405:1997); German version EN ISO 7405:1997 |
| DIN EN ISO 7438-2000 |
金屬材料.彎曲試驗 |
Metallic materials - Bend test (ISO 7438:1985); German version EN ISO 7438:2000 |
| DIN EN ISO 7438-2005 |
金屬材料.彎曲試驗 |
|
| DIN EN ISO 7439-2002 |
含銅的宮內節育避孕器具.要求、試驗 |
Copper-bearing intra-uterine contraceptive devices - Requirements, tests (ISO 7439:2002); German version EN ISO 7439:2002 |
| DIN EN ISO 7441-1995 |
金屬和合金的腐蝕.雙金屬在露天暴露腐蝕試驗中腐蝕的測定 |
Corrosion of metals and alloys - Determination of bimetallic corrosion in outdoor exposure corrosion tests (ISO 7441:1984); German version EN ISO 7441:1995 |
| DIN EN ISO 7458-2004 |
玻璃容器.耐內部壓力性.試驗方法 |
|
| DIN EN ISO 7459-2004 |
玻璃容器.耐熱沖擊性和熱沖擊耐久性.試驗方法 |
|
| DIN EN ISO 748-2000 |
明渠液流的測量.速度-面積方法 |
Measurement of liquid flow in open channels - Velocity-area methods (ISO 748:1997); German version EN ISO 748:2000 |
| DIN EN ISO 7488-1995 |
牙科用混汞器 |
Dental amalgamators (ISO 7488:1991); German version EN ISO 7488:1995 |
| DIN EN ISO 7490-2001 |
牙科用石膏粘接鑄造熔模 |
Dental gypsum-bonded casting investments (ISO 7490:2000); German version EN ISO 7490:2000 |
| DIN EN ISO 7491-2001 |
牙科材料.彩色穩定性的測定 |
Dental materials - Determination of colour stability (ISO 7491:2000); German version EN ISO 7491:2000 |
| DIN EN ISO 7492-1998 |
牙科用探針 |
Dental explorers (ISO 7492:1997); German version EN ISO 7492:1998 |
| DIN EN ISO 7493-2000 |
牙科醫生凳 |
Dental operator`s stool (ISO 7493:1997 + Technical Corrigendum 1:1999); German version EN ISO 7493:2000 |
| DIN EN ISO 7494-1-2005 |
牙科學.牙科裝置.第1部分:一般要求和試驗方法 |
|
| DIN EN ISO 7494-1997 |
牙科綜合治療設備 |
Dental units (ISO 7494:1996); German version EN ISO 7494:1997 |
| DIN EN ISO 75-1-1996 |
塑料.測定耐熱成型溫度.第1部分:一般測試方法 |
Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:1993); German version EN ISO 75-1:1996 |
| DIN EN ISO 75-1-2004 |
塑料.載荷下?lián)锨鷾囟鹊臏y定.第1部分:一般試驗方法 |
|
| DIN EN ISO 75-2-1996 |
塑料.測定耐熱成型溫度.第2部分:塑料和硬橡膠 |
Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:1993); German version EN ISO 75-2:1996 |
| DIN EN ISO 75-2-2004 |
塑料.載荷下?lián)锨鷾囟鹊臏y定.第2部分:塑料和硬橡膠 |
|
| DIN EN ISO 75-3-1996 |
塑料.測定耐熱成型溫度.第3部分:高強度熱固性疊層板和長纖維增強塑料 |
Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics (ISO 75-3:1993); German version EN ISO 75-3:1996 |
| DIN EN ISO 75-3-2004 |
塑料.載荷下?lián)锨鷾囟鹊臏y定.第3部分:高強度熱固性疊層板和長纖維增強塑料 |
|
| DIN EN ISO 7500-1 Bb.1-1999 |
金屬材料.靜態單軸壓縮試驗機的驗證.第1部分:拉伸/壓縮試驗機.測力系統的驗證與校準.拉伸、壓縮及彎曲試驗機的要求、驗證和校準的一般規則 |
Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system; general for requirements, verification and calibration of tension, compressio |
| DIN EN ISO 7500-1 Bb.2-1999 |
金屬材料.靜態單軸壓縮試驗機的驗證.第1部分:拉伸/壓縮試驗機.測力系統的驗證與校準.彈簧試驗機的要求、驗證和校準的一般規則 |
Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system; general for requirements, verification and calibration of spring testing mach |
| DIN EN ISO 7500-1 Bb.3-1999 |
金屬材料.靜態單軸壓縮試驗機的驗證.第1部分:拉伸/壓縮試驗機.測力系統的驗證與校準.疲勞試驗機的要求、驗收和校準的一般規則 |
Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system; general for requirements, verification and calibration of fatigue testing mac |
| DIN EN ISO 7500-1-1999 |
金屬材料.靜態單軸壓縮試驗機的驗證.第1部分:拉伸/壓縮試驗機.測力系統的驗證與校準 |
Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system (ISO 7500-1:1999); German version EN ISO 7500-1:1999 |
| DIN EN ISO 7500-1-2004 |
金屬材料.靜態單軸向試驗機的驗證.第1部分:拉伸/壓縮試驗機.力測量系統的驗證和校正 |
|
| DIN EN ISO 7500-2-1999 |
金屬材料.靜態單軸應力試驗機的校驗.第2部分:拉伸應力的蠕變試驗機.試驗力的校驗 |
Metallic materials - Verification of static uniaxial testing machines - Part 2: Tension creep testing machines; verification of the applied load (ISO 7500-2:1996); German version EN ISO 7500-2:1999 |
| DIN EN ISO 7536-1996 |
石油產品.汽油耐氧化性測定.誘導期方法 |
Petroleum products - Determination of oxidation stability of gasoline - Induction period method (ISO 7536:1994); German version EN ISO 7536:1996 |
| DIN EN ISO 7539-1-1995 |
金屬和合金的腐蝕.腐蝕應力試驗.第1部分:試驗程序的通用指南 |
Corrosion of metals and alloys - Stress corrosion testing - Part 1: General guidance on testing procedures (ISO 7539-1:1987); German version EN ISO 7539-1:1995 |
| DIN EN ISO 7539-2-1995 |
金屬和合金的腐蝕.應力腐蝕試驗.第2部分:彎曲梁試樣的制備和使用 |
Corrosion of metals and alloys - Stress corrosion testing - Part 2: Preparation and use of bent-beam specimen (ISO 7539-2:1989); German version EN ISO 7539-2:1995 |
| DIN EN ISO 7539-3-1995 |
金屬和合金的耐腐蝕性.應力腐蝕試驗.第3部分:U型彎曲試樣的制備和使用 |
(Corrosion of metals and alloys - Stress corrosion testing - Part 3: Preparation and use of U-bend specimens (ISO 7539-3:1989); German version EN ISO 7539-3:1995) |
| DIN EN ISO 7539-4-1995 |
金屬和合金的腐蝕.應力腐蝕試驗.第4部分:單向載荷拉伸試樣的制備和使用 |
(Corrosion of metals and alloys - Stress corrosion testing - Part 4: Preparation and use of uniaxially loaded tension specimens (ISO 7539-4:1989); German version EN ISO 7539-4:1995) |
| DIN EN ISO 7539-5-1995 |
金屬和合金的腐蝕.應力腐蝕試驗.第5部分:C-環形試樣的制備和使用 |
(Corrosion of metals and alloys - Stress corrosion testing - Part 5: Preparation and use of C-ring specimens (ISO 7539-5:1989); German version EN ISO 7539-5:1995) |
| DIN EN ISO 7539-6-2003 |
金屬和合金的腐蝕.應力腐蝕試驗.第6部分:預斷裂試樣的制備和使用 |
(Corrosion of metals and alloys - Stress corrosion testing - Part 6: Preparation and use of pre-cracked specimens (ISO 7539-6:2003); German version EN ISO 7539-6:2003) |
| DIN EN ISO 7539-7-1995 |
金屬和合金的腐蝕.應力腐蝕試驗.第7部分:慢速應變率試驗 |
(Corrosion of metals and alloys - Stress corrosion testing - Part 7: Slow strain rate testing (ISO 7539-7:1989); German version EN ISO 7539-7:1995) |
| DIN EN ISO 7539-7-2005 |
金屬與合金的腐蝕.應力腐蝕試驗.第7部分:慢速率應力試驗方法 |
|
| DIN EN ISO 7551-1998 |
牙科吸收點 |
(Dental absorbent points (ISO 7551:1996); German version EN ISO 7551:1998) |
| DIN EN ISO 7579-1996 |
染料.有機溶劑溶解度的測定.重量法電影攝影.在打過8mmS型影像區域.位置和尺寸 |
Dyestuffs - Determination of solubility in organic solvents - Gravimetric method (ISO 7579:1990); German version EN ISO 7579:1996 |
| DIN EN ISO 7590-2001 |
鋼絲輸送帶.總厚度和覆層厚度的測量方法 |
Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness (ISO 7590:2001); German version EN ISO 7590:2001 |
| DIN EN ISO 7622-1-1995 |
鋼絲芯線輸送機皮帶.縱向牽引試驗.第1部分:伸長的測量 |
Steel cord conveyor belts - Longitudinal traction test - Part 1: Measurement of elongation (ISO 7622-1:1984); German version EN ISO 7622-1:1995 |
| DIN EN ISO 7622-2-1995 |
鋼絲芯線輸送機皮帶.縱向牽引試驗.第2部分:抗拉強度的測量 |
Steel cord conveyor belts - Longitudinal traction test - Part 2: Measurement of tensile strength (ISO 7622-2:1984); German version EN ISO 7622-2:1995 |
| DIN EN ISO 7623-1997 |
鋼絲繩輸送機皮帶.鋼絲繩和芯層間粘合.交貨狀態檢驗和熱處理后的檢驗 |
Steel cord conveyor belts - Cord-to-coating bond test - Initial test and after thermal treatment (ISO 7623:1996); German version EN ISO 7623:1997 |
| DIN EN ISO 7662-1996 |
橡膠和塑料軟管.內襯磨損的測定 |
Rubber and plastics hoses - Determination of abrasion of lining (ISO 7662:1988); German version EN ISO 7662:1996 |
| DIN EN ISO 7686-2005 |
塑料管和配件.不透明度的測定 |
|
| DIN EN ISO 7711-1-1998 |
牙科用旋轉器械.金剛鉆器具.第1部分:尺寸,要求,標識和包裝 |
Dental rotary instruments - Diamond instruments - Part 1: Dimensions, requirements, marking and packaging (ISO 7711-1:1997); German version EN ISO 7711-1:1998 |
| DIN EN ISO 7711-2-1995 |
牙科用旋轉器械.金剛鉆器具.第2部分:圓盤刀 |
Dental rotary instrument - Diamond instruments - Part 2: Discs (ISO 7711-2:1992); German version EN ISO 7711-2:1995 |
| DIN EN ISO 7711-3-1995 |
牙科用旋轉器械.金剛鉆器具.第3部分:磨粒尺寸、名稱與符號和彩色編碼 |
Dental rotary instruments - Diamond instruments - Part 3: Grit sizes, designation and colour code (ISO 7711-3:1992); German version EN ISO 7711-3:1995 |
| DIN EN ISO 7711-3-2005 |
牙醫學.金剛鉆旋轉器械.第3部分:磨粒尺寸、名稱與符號和色碼 |
|
| DIN EN ISO 7719-1998 |
1型通用扭矩六角螺母(全金屬螺母). 強度等級5,8和10 |
Prevailing torque type (all-metal hexagon nuts), style 1 - Property classes 5, 8 and 10 (ISO 7719:1997); German version EN ISO 7719:1997 |
| DIN EN ISO 772-2000 |
液體比重計測定.詞匯和符號 |
Hydrometric determinations - Vocabulary and symbols (ISO 772:1996); German version EN ISO 772:2000 |
| DIN EN ISO 772/A1-2004 |
水文測定.詞匯和符號 |
(Hydrometric determinations - Vocabulary and symbols (ISO 772:1996/Amd 1:2002); German version EN ISO 772:2000/A1:2003) |
| DIN EN ISO 772/A1-2004 |
水文測定.詞匯和符號 |
|
| DIN EN ISO 7721-2-1994 |
沉頭螺釘.第2部分:十字槽 |
Countersunk flat head screws - Part 2: Penetration depth of cross recesses (ISO 7721-2:1990); German version EN ISO 7721-2:1994 |
| DIN EN ISO 7726-2002 |
熱環境的人類工效學.物理量測量儀器 |
Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998); German version EN ISO 7726:2001 |
| DIN EN ISO 7730-1995 |
中等熱環境.對熱舒適度預測平均通過(PMV)和預測不滿意百分率(PPD)的測定及條件規范 |
Moderate thermal environments - Determination of the PMV and PPD indices and specification of the conditions for thermal comfort (ISO 7730:1994); German version EN ISO 7730:1995 |
| DIN EN ISO 7731-2005 |
人類功效學.公共和工作場所險情信號.險情聽覺信號(ISO 7731-2003);德文版本 EN ISO 7731-2005 |
|
| DIN EN ISO 7751-1997 |
橡膠和塑料軟管及軟管管道.試驗壓力和爆破壓力與設計工作壓力的比值 |
Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to design working pressure (ISO 7751:1991); German version EN ISO 7751:1997 |
| DIN EN ISO 7765-1-2004 |
塑料薄膜和薄板.自由落體法測定抗沖擊性.第1部分:梯級法 |
|
| DIN EN ISO 7779-2002 |
聲學.信息技術設備和電信設備排放的空氣噪聲的測量 |
Acoustics - Measurement of airborne noise emitted by information technology and telecommunications equipment (ISO 7779:1999); German version EN ISO 7779:2001 |
| DIN EN ISO 7783-1-1999 |
涂層材料.水蒸氣滲透率的測定.第1部分:游離膜用皮層法 |
Paints and varnishes - Determination of water-vapour transmission rate - Part 1: Dish method for free films (ISO 7783-1:1996, including Technical Corrigendum 1:1998); German version EN ISO 7782-1:1999 |
| DIN EN ISO 7783-2-1999 |
涂料和清漆.外部磚石工程和混凝土用涂覆材料和涂覆系統.第2部分:水蒸氣滲透率的測定和分類 |
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 2: Determination and classification of water-vapour transmission rate (permeability) (ISO 7783-2:1999); German version EN ISO 7783-2:1999 |
| DIN EN ISO 7785-1-1999 |
手持式牙科器械.第1部分:高速空氣渦輪手持器械 |
Dental handpieces - Part 1: High-speed air turbine handpieces (ISO 7785-1:1997); German version EN ISO 7785-1:1999 |
| DIN EN ISO 7785-2-1998 |
手持式牙科器械.第2部分:平角和嚙合角手持式器械 |
Dental handpieces - Part 2: Straight and geared angle handpieces (ISO 7785-2:1995); German version EN ISO 7785-2:1997 |
| DIN EN ISO 7786-2001 |
牙科用旋轉器械.實驗室研磨器械 |
Dental rotary instruments - Laboratory abrasive instruments (ISO 7786:2001); German version EN ISO 7786:2001 |
| DIN EN ISO 7787-2-2001 |
牙科用旋轉器械.切割刀具.第2部分:實驗室用硬質合金刀具 |
Dental rotary instruments - Cutters - Part 2: Carbide laboratory cutters (ISO 7787-2:2000); German version EN ISO 7787-2:2000 |
| DIN EN ISO 7787-4-2002 |
牙科用旋轉器械.切割刀具.第4部分:技工室用小型硬質合金刀具 |
Dental rotary instruments - Cutters - Part 4: Miniature carbide laboratory cutters (ISO 7787-4:2002); German version EN ISO 7787-4:2002 |
| DIN EN ISO 7792-1-2004 |
塑料.熱塑性聚酯模塑和擠壓材料.第1部分:名稱與符號系統和基本規范 |
|
| DIN EN ISO 7792-2-2004 |
塑料.熱塑性聚酯模塑和擠壓材料.第2部分:試驗樣品的制備和性能測定 |
|
| DIN EN ISO 7799-2000 |
金屬材料.厚度3mm或小于3mm的板材或帶材.反向彎曲試驗 |
Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test (ISO 7799:1985); German version EN ISO 7799:2000 |
| DIN EN ISO 780-1999 |
包裝.貨物搬運用圖形標志 |
Packaging - Pictorial marking for the handling of goods (ISO 780:1997); German version EN ISO 780:1999 |
| DIN EN ISO 7808-1998 |
塑料.熱固性模塑材料.輸送流的測定 |
Plastics - Thermosetting moulding materials - Determination of transfer flow (ISO 7808:1992); German version EN ISO 7808:1998 |
| DIN EN ISO 7822-2000 |
玻璃纖維增強塑料.空隙量測定.灼燒損失、機械粉碎和靜態計數法 |
Textile glass reinforced plastics - Determination of void content - Loss on ignition, mechanical disintegration and statistical counting methods (ISO 7822:1990); German version EN ISO 7822:1999 |
| DIN EN ISO 7823-1-2000 |
塑料.聚甲基丙烯酸甲酯板.型號、尺寸和特性.第1部分:鑄板 |
Plastic - Poly(methyl methacrylate) sheet; Types, dimensions and characteristics - Part 1: Cast sheets (ISO 7823-1:1998); German version EN ISO 7823-1:2000 |
| DIN EN ISO 7823-2-1997 |
塑料.甲基丙烯酸甲酯板.型號,尺寸和特性.第2部分:熔化壓延的積壓板 |
Plastics - Poly(methyl methacrylate) sheets; types, dimensions and characteristics - Part 2: Melt-calendered extruded sheets (ISO 7823-2:1996); German version EN ISO 7823-2:1996 |
| DIN EN ISO 7823-3-2004 |
塑料.聚甲基丙烯酸甲酯薄板.類型、尺寸和特性.第3部分:連續澆鑄板 |
|
| DIN EN ISO 7827-1996 |
水質.含水介質中有機物的充分需氧生物降解性測定.分析溶解的有機礦物質的方法 |
Water quality - Evaluation in an aqueous medium of the ultimate aerobic biodegradability of organic compounds - Method by analysis of dissolved organic carbon (DOC) (ISO 7827:1994); German version EN ISO 7827:1995 |
| DIN EN ISO 7837-2000 |
肥料.細粒肥料容積密度的測定 |
Fertilizers - Determination of bulk density (loose) of fine-grained fertilizers (ISO 7837:1992); German version EN ISO 7837:2000 |
| DIN EN ISO 7840 Berichtigung 1-2001 |
DIN EN ISO 7840-1995的勘誤 |
Corrigendum to DIN EN ISO 7840:1995 (German version EN ISO 7840:1995/A1:2000) |
| DIN EN ISO 7840-1995 |
小艇.抗燃燒燃料軟管 |
Small craft - Fire-resistant fuel hoses (ISO 7840:1994); German version EN ISO 7840:1995 |
| DIN EN ISO 7840-2004 |
小艇.耐火燃油軟管 |
|
| DIN EN ISO 7854-1997 |
橡膠或塑料涂層織物.抗折曲損壞性的測定 |
Rubber- or plastics-coated fabrics - Determination of resistance to damage by flexing (ISO 7854:1995); German version EN ISO 7854:1997 |
| DIN EN ISO 7864-1996 |
一次性使用無菌皮下注射針頭 |
Sterile hypodermic needles for single use (ISO 7864:1993); German version EN ISO 7864:1995 |
| DIN EN ISO 787-13-2002 |
顏料和體質染料的通用試驗方法.第13部分:水溶性硫酸鹽、氯化物和硝酸鹽的測定 |
General methods of test for pigments and extenders - Part 13: Determination of water-soluble sulphates, chlorides and nitrates (ISO 787-13:2002); German version EN ISO 787-13:2002 |
| DIN EN ISO 787-14-2002 |
顏料和體質染料的通用試驗方法.第14部分:水萃取物電阻率的測定 |
General methods of test for pigments and extenders - Part 14: Determination of resistivity of aqueous extract (ISO 787-14:2002); German version EN ISO 787-14:2002 |
| DIN EN ISO 787-19-1995 |
顏料和填料的一般試驗方法.第19部分:水溶性硝酸鹽的測定(水楊酸法) |
General methods of test for pigments and extenders - Part 19: Determination of water-soluble nitrates (salicylic acid method) (ISO 787-19:1974); German version EN ISO 787-19:1995 |
| DIN EN ISO 787-2-1995 |
顏料和填充劑的一般試驗方法.第2部分:在105 ℃揮發物的測定 |
General methods of test for pigments and extenders - Part 2: Determination of matter volatile at 105 C (ISO 787-2:1981); German version EN ISO 787-2:1995 |
| DIN EN ISO 787-3-2001 |
顏料和填充劑的一般試驗方法.第3部分:水溶物的測定.熱萃取法 |
General methods of test for pigments and extenders - Part 3: Determination of matter soluble in water; Hot extraction method (ISO 787-3:2000); German version EN ISO 787-3:2000 |
| DIN EN ISO 787-8-2001 |
顏料和填充劑的一般試驗方法.第8部分:水溶物的測定.冷萃取法 |
General methods of test for pigments and extenders - Part 8: Determination of matter soluble in water; Cold extraction method (ISO 787-8:2000); German version EN ISO 787-8:2000 |
| DIN EN ISO 787-9-1995 |
顏料和填充劑的一般試驗方法.第9部分:水懸浮液pH值的測定 |
General methods of test for pigments and extenders - Part 9: Determination of pH value of an aqueous suspension (ISO 787-9:1981); German version EN ISO 787-9:1995 |
| DIN EN ISO 7885-2001 |
一次性無菌牙科用注射針頭 |
Sterile dental injection needles for single-use (ISO 7885:2000); German version EN ISO 7885:2000 |
| DIN EN ISO 7886-1-1997 |
一次性使用無菌皮下注射器.第1部分:人工注射器 |
Sterile hypodermic syringes for single use - Part 1: Syringes for manual use (ISO 7886-1:1993, including Technical Corrigendum 1:1995); German version EN ISO 7886-1:1996 |
| DIN EN ISO 7886-2-1997 |
一次性使用無菌皮下注射器.第1部分:帶動力注射泵的注射器 |
Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps (ISO 7886-2:1997); German version EN ISO 7886-2:1997 |
| DIN EN ISO 7886-3-2005 |
一次性使用無菌皮下注射器.第3部分:固定劑量免疫接種用自動報廢注射器 |
|
| DIN EN ISO 7886-3-2005 |
一次性使用無菌皮下注射器.第3部分:固定劑量免疫接種用自動報廢注射器 |
|
| DIN EN ISO 7886-3-2005 |
一次性使用無菌皮下注射器.第3部分:固定劑量免疫接種用自動報廢注射器 |
|
| DIN EN ISO 7887-1994 |
水的質量.水的顏色檢驗和測定 |
Water quality - Examination and determination of colour (ISO 7887:1994); German version EN ISO 7887:1994 |
| DIN EN ISO 7899-1-1999 |
水質.表面水和廢水中腸球菌的檢測和計數.第1部分:通過液體介質中接種的微型法 |
Water quality - Detection and enumeration of intestinal enterococci in surface and waste water - Part 1: Miniaturized method (most probable number) by inoculation in liquid medium (ISO 7899-1:1998); German version EN ISO 7899-1:1998 |
| DIN EN ISO 7899-2-2000 |
水質.糞便鏈球菌的檢測和計數.第2部分:薄膜過濾法 |
Water quality - Detection and enumeration of intestinal enterococci - Part 2: Membrane filtration method (ISO 7899-2:2000); German version EN ISO 7899-2:2000 |
| DIN EN ISO 7932-1998 |
微生物學.蠟狀芽孢桿菌計數的一般指導.30°C時的菌落計數技術 |
Microbiology - General guidance for the enumeration of Bacillus cereus - Colony-count technique at 30 C (ISO 7932:1993, including Technical Corrigendum 1:1997) |
| DIN EN ISO 7933-2004 |
熱環境的人類工效學.通過計算預熱應力對熱應力的分析測定和說明 |
|
| DIN EN ISO 7937-2004 |
食品和動物飼料的微生物學.梭菌屬計數的水平方法.菌落計數技術 |
|
| DIN EN ISO 7944-1998 |
光學和光學儀器.基準波長 |
Optics and optical instruments - Reference wavelengths (ISO 7944:1998); German version EN ISO 7944:1998 |
| DIN EN ISO 7965-2-1996 |
包裝.包裝袋.墜落試驗.第2部分:由柔性熱塑性塑料簿膜制成的包裝袋 |
Sacks - Drop test - Part 2: Sacks made from thermoplastic flexible film (ISO 7965-2:1993); German version EN ISO 7965-2:1996 |
| DIN EN ISO 7980-2000 |
水質.鈣和鎂的測定.原子吸收光譜測定法 |
Water quality - Determination of calcium and magnesium - Atomic absorption spectrometric method (ISO 7980:1986); German version EN ISO 7980:2000 |
| DIN EN ISO 7998-1996 |
光學和光學儀器.眼鏡框架.等義術語表及詞匯 |
Optics and optical instruments - Spectacle frames - Vocabulary and list of equivalent terms (ISO 7998:1984); German version EN ISO 7998:1996 |
| DIN EN ISO 801-1-1996 |
紙漿.成批銷售質量的測定.第1部分:板式包裝紙漿 |
Pulps - Determination of saleable mass in lots - Part 1: Pulp baled in sheet form (ISO 801-1:1994); German version EN ISO 801-1:1996 |
| DIN EN ISO 801-3-1996 |
紙漿.成批銷售質量的測定.第3部分:大宗包裝 |
Pulps - Determination of saleable mass in lots - Part 3: Unitized baled (ISO 801-3:1994); German version EN ISO 801-3:1996 |
| DIN EN ISO 8028-2000 |
無氣涂料噴射用橡膠和/或塑料軟管組件.規范 |
Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO 8028:1999); German version EN ISO 8028:2000 |
| DIN EN ISO 8030-1998 |
橡膠和塑料軟管.易燃燒性試驗方法 |
Rubber and plastics hoses - Method of test for flammability (ISO 8030:1995); German version EN ISO 8030:1997 |
| DIN EN ISO 8031-1997 |
橡膠和塑料軟管和軟管組件.電阻的測定 |
Rubber and plastics hoses and hose assemblies - Determination of electrical resistance (ISO 8031:1993); German version EN ISO 8031:1997 |
| DIN EN ISO 8032-1999 |
橡膠和塑料軟管組件.帶液壓脈沖試驗的組合式彎曲(半Ω 型試驗) |
Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test (half-omega test) (ISO 8032:1997); German version EN ISO 8032:1999 |
| DIN EN ISO 8044-1999 |
金屬及合金的腐蝕特性.基本術語與定義 |
Corrosion of metals and alloys - Basic terms and definitions (ISO 8044:1999); Trilingual version EN ISO 8044:1999 |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com