標準號 |
中文名稱 |
英文名稱 |
| DIN 47409-1985 |
通信軟線用折套管 |
(Protective sleeves against kinking for telecommunication cords) |
| DIN 4741-1-1984 |
室內通風設備.聚丙烯管.最小壁厚的計算 |
(Ventilation plants; polypropylene (PP) pipes; calculation of the minimum wall thickness) |
| DIN 4741-2-1987 |
室內通風設備.聚丙乙烯(PP)Ⅰ型通風管.管子異型件.彎頭最小壁厚 |
(Ventilation plant; type 1 polypropylene (PP) uptakes; pipe fittings, bends; minimum wall thicknesses) |
| DIN 4741-5-1988 |
室內通風設備.聚丙乙烯(PP)Ⅰ型通風管.非加固管道.最小壁厚 |
Ventilation plant; polypropylene (PP) pipes, type 1; non-reinforced ducts; minimum wall thickness |
| DIN 47410-1986 |
通信設備和信息處理設備用軟線.交貨技術條件 |
(Cords for telecommunication systems and information processing systems; technical terms of delivery) |
| DIN 47411-1981 |
帶PVC絕緣套和編織護套.單芯式.防潮絞合通信軟線 |
(Telecommunication cord with stranded wires; PVC-insulation and textil braided outer covering, single conductor, dampproof) |
| DIN 47412-1-1981 |
帶PVC絕緣套和PVC護套.單芯.防濺水的絞合通信軟線 |
(Telecommunication cord with stranded wires, PVC-insulation and PVC outer covering, single conductor, sprayproof) |
| DIN 47412-2-1981 |
帶PVC絕緣套.無PVC護套.單芯.防潮濕空氣的絞合通信軟線 |
(Telecommunication cord with stranded wires; PVC-insulation without PVC-outer covering, single conductor, dampproof) |
| DIN 47413-1981 |
帶PVC絕緣套和編織護套對絞式防濺水型絞合通信軟線 |
(Telecommunication cord with stranded wires; PVC-insulation and textil braided outer covering, paired conductors, dampproof) |
| DIN 47414-1981 |
帶PVC絕緣套和PVC護套對絞式防濺水型絞合通信軟線 |
(Telecommunication cord with stranded wires; PVC-insulation and PVC outer covering, paired conductors, waterproof) |
| DIN 47452-1981 |
帶編織絕緣套單芯式用于干燥環境的絞合通信軟線 |
(Telecommunication cord with tinsel wires; textil-insulation, single conductor, for indoor) |
| DIN 47453-1981 |
用金屬絲絞合線的通信軟線.帶織物絕緣套和護套.單芯.用于干燥的室內 |
(Telecommunication cord with tinsel wires; textil-insulation and textil braided outer covering, single conductor, for indoor) |
| DIN 47460-1981 |
帶PVC絕緣套和編織護套單芯式防潮型絞合通信軟線 |
(Telecommunication cord with tinsel wires; PVC-insulation and textil braided outer covering, single conductor, dampproof) |
| DIN 47461-1981 |
帶PVC絕緣套和PVC護套單芯式防濺水型絞合通信軟線 |
(Telecommunication cord with tinsel wire; with PVC-insulation and PVC outer covering, single conductor, sprayproof) |
| DIN 47462-1981 |
帶PVC絕緣套.單芯式.防濺水型金屬絞合通領帶領帶信軟線 |
(Telecommunication cord with tinsel wire; with PVC-insulation single conductor, twisted, sprayproof) |
| DIN 47463-1981 |
帶PVC絕緣套和PVC護套.單芯式.防濺水型金屬.絞合通信軟件 |
Telecommunication cord with tinsel wire; with PVC-insulation and PVC outer covering, single conductor, sprayproof |
| DIN 47464-1986 |
通信設備用繞線話筒4 芯軟線 |
Coiled handset cord for telecommunication devices; 4 wire |
| DIN 4747-1-1991 |
區域供熱設備和區域水暖供熱網相連接的家用裝置的安全技術要求 |
Heating plants for district heating; safety requirements on domestic installations to be connected to hot-water district heating pipes |
| DIN 475-1-1984 |
螺釘扳手開口度.配件.管子配件 |
(Widths across flats for bolts, screws, valves and fittings) |
| DIN 475-2-1982 |
螺釘和螺母用扳手的開口度 |
(Wrench and socket openings) |
| DIN 475-3-1987 |
扳手的開口度.雙端扳手 |
(Size pairing of double ended wrenches) |
| DIN 4750-1993 |
允許蒸汽壓力0.5巴以下的蒸汽鍋爐和加熱設備中蒸汽室用立管的要求 |
Requirements for vertical pipes for steam rooms in steamboilers and heating plants guarding against steampressure of 0,5 bar |
| DIN 4751-1-1994 |
水暖設備.水溫達120℃的開式和閉式物理保護供暖設備.安全技術裝備 |
(Medium Temperature Hot Water Systems (MTHWS) with a boiler flow temperature up to 120 C - Specification for open systems and sealed systems with pressurisation by gravity using a column of water or by safety valves - Safety equipment) |
| DIN 4751-2-1994 |
水暖設備.水溫達120℃閉式恒溫保安供暖設備.安全技術裝備 |
Medium Temperature Hot Water Systems (MTHWS) with a boiler flow temperature up to 120 C - Specification for sealed systems using thermostatic control - Safety equipment |
| DIN 4751-3-1993 |
水暖設備.水溫達95℃帶強制循環額定熱功率50kW的閉式恒溫保安的供暖設備.安全技術設備 |
(Medium Temperature Hot Water Systems (MTHWS) with a boiler flow temperature up to 95 C and forced flow boilers with rated output up to 50 kW; specification for sealed systems using thermostatic control; safety equipment) |
| DIN 4753-1-1988 |
飲用水和工業用水的熱水裝置.要求.標記.裝備和檢驗 |
(Water heaters and water heating installations for drinking water and service water; requirements, marking, equipment and testing) |
| DIN 4753-10-1989 |
飲用水和工業用水的熱水裝置.無涂層鋼容器的陰極防腐蝕.要求和檢驗 |
(Water heating installations for drinking water and service water; cathodic corrosion protection of uncoated steel vessels; requirements and testing) |
| DIN 4753-11-1990 |
飲用水和工業用水的熱水裝置.中間介質熱交換器.要求.檢驗.標記 |
(Water heaters and hot water systems for drinking and service water; indirect heat exchangers; requirements, testing and marking) |
| DIN 4753-2-1984 |
飲用水和工業用水的熱水裝置.熱水器和熱水設備記錄的處理工藝 |
(Water heating installations for drinking water and for water for industrial purposes; procedure of registration of water heaters and of water heating installations) |
| DIN 4753-3-1993 |
飲用水和工業用水的熱水裝置和水加熱設備.水面涂釉防腐.要求和檢驗 |
(Water heaters and water heating installations for potable water and for service water; corrosion protection on the water side by enamelling; requirements and testing) |
| DIN 4753-4-1994 |
飲用水和工業用水的熱水裝置.觸水面用合成樹脂加熱硬化而成的防腐蝕.要求和檢驗 |
(Water heaters and water heating installations for drinking water and service water - Part 4: Corrosion protection on the water side by means of hot-setting, duroplastic coating materials; requirements and testing) |
| DIN 4753-5-1994 |
飲用水和工業用水的熱水裝置.觸水面用天然或合成橡膠防腐蝕的襯鋪薄膜.要求和檢驗 |
(Water heaters and water heating installations for drinking water and service water - Part 5: Corrosion protection on the water side by means of foil coating made from natural or synthetic rubber; requirements and testing) |
| DIN 4753-6-1986 |
飲用水和工業用水的熱水裝置.搪瓷鋼容器陰級的防腐蝕.要求和檢驗 |
(Water heating installations for drinking water and service water; cathodic corrosion protection of enamelled steel containers; requirements and testing) |
| DIN 4753-7-1988 |
飲用水和工業用水的熱水裝置.用抗腐蝕金屬材料作觸水面的防腐蝕.要求和檢驗 |
(Water heaters and water heating installations for drinking water and service water; corrosion protection on the water side by corrosion-resistant metallic materials; requirements and testing) |
| DIN 4753-9-1990 |
飲用水和工業用水的熱水裝置.用熱塑涂層材料作觸水面的防腐蝕.要求和檢驗 |
(Water heaters and water heating installations for drinking water and service water; corrosion protection on the water side by means of thermoplastic coating materials; requirements and testing) |
| DIN 4754-1994 |
以有機液體為載體的傳熱設備.安全技術要求.檢驗 |
(Heat transfer installations working with organic heat transfer fluids - Safety requirements, test) |
| DIN 4755-1-1981 |
燃油設備.采暖設備的燃油裝置.安全技術要求 |
(Oil firing installations; Oil firing equipment for central heating systems; Technical safety requirements) |
| DIN 4755-2-1984 |
燃油設備.燃料油的供給.燃料油供給設備安全技術要求.檢驗.GSG標志 |
(Oil burning installations; fuel oil supply, fuel oil supply systems; safety requirements, testing) |
| DIN 4755-2004 |
燃油設備.燃油裝置的技術規定.檢驗 |
|
| DIN 4757-2-1980 |
帶有機載熱體的太陽能加熱裝置.對安全技術結構的要求 |
(Solar heating plants operating on organic heat transfer media; Requirements relating to safe design and construction) |
| DIN 4757-4-1982 |
太陽能加熱裝置.太陽能聚熱器效率.熱量及壓降的測定 |
(Solar heating plants; Solar collectors; Determination of efficiency, heat capacity and pressure drop) |
| DIN 4759-1-1986 |
多種能源產熱設備.固體燃料.油和氣體燃料及共用一個煙囪的鍋爐.安全要求和檢驗 |
(Process heat installations for more than one kind of energy; one boiler for solid fuel and one for oil or gas and only one chimney; safety requirements and tests) |
| DIN 476-2-1991 |
紙張成品規格.C系列 |
(Trimmed sizes of paper; C serie) |
| DIN 4760-1982 |
幾何形狀偏差.概念.分級系統 |
(Form deviations; Concepts; Classification system) |
| DIN 47600-1-1974 |
電壓10KV以下電力電纜用金屬鑄造連接套.保護連接套 |
(Cast Metal Joint Boxes for Power Cables up to 10 kV; Protective Joint Boxes) |
| DIN 47600-2-1974 |
１０ＫＶ以下電力電纜用金屬鑄造連接套.內套 |
(Cast Metal Joint Boxes for Power Cables up to 10 kV; Internal Joint Boxes) |
| DIN 47600-3-1974 |
１０ＫＶ以下電力電纜用金屬鑄造連接套.紙絕緣電纜連接套的配置.銅絞線連接的配置 |
(Cast Metal Joint Boxes for Power Cables up to 10 kV; Correlation of Joint Boxes with Paper-insulated Cables; Correlation of Bare Stranded Copper Bonding Wire) |
| DIN 47600-4-1974 |
１０ＫＶ以下電力電纜用金屬鑄造連接套.紙絕緣電纜的內部結構 |
(Cast Metal Joint Boxes for Power Cables up to 10 kV; Internal Design for Paper-insulated Cables) |
| DIN 47600-5-1974 |
１０ＫＶ以下電力電纜用金屬鑄造連接套.紙絕緣電纜的安裝說明 |
(Cast Metal Joint Boxes for Power Cables up to 10 kV; Installation Instructions for Paper-insulated Cables) |
| DIN 47600-6-1974 |
１０ＫＶ以下電力電纜用金屬鑄造連接套.0.6/1KV塑料絕緣電纜連接套的配置 |
(Cast Metal Joint Boxes for Power Cables up to 10 kV; Correlation of Joint Boxes with Plastic Insulated Cables 0.6/1 kV) |
| DIN 47600-7-1974 |
１０ＫＶ以下電力電纜用金屬鑄造連接套.1.6/1KV塑料絕緣電纜的內部結構 |
(Cast Metal Joint Boxes for Power Cables up to 10 kV; Internal Design for Plastic Insulated Cables 0.6/1 kV) |
| DIN 47606-1974 |
１０ＫＶ－３０ＫＶ帶單個屏蔽電纜芯線的電力電纜金屬鑄造連接套.保護套 |
(Joint boxes for power cables up to 30 kV; joint protection boxes) |
| DIN 47608-1-1988 |
通信設備用帶切斷端子接觸的端子板.尺寸.材料 |
(Terminal strip with insulation displacement contacts; for telecommunications sytems; dimensions, material) |
| DIN 47608-2-1997 |
電信設備用帶切斷端子接觸的端子板.第2部分:要求.檢驗 |
(Terminal strips with insulation displacement contacts for telecommunication systems - Part 2: Requirements, test) |
| DIN 47609-1989 |
電信電纜.控制電纜及信號電纜用塑料制耐氣候影響的分流器柜.要求.檢驗 |
(Cable distribution cabinets from plastic for outdoor use; requirements, tests) |
| DIN 47611-1978 |
通信設備用端子板.尺寸 |
(Terminal block for telecommunication systems; dimensions) |
| DIN 47612-1981 |
通信電纜終端系統計數方式 |
(Manner of counting at terminal systems for telecommunication cables) |
| DIN 47613-1-1968 |
通信電纜用分線套管.鉛套管 |
(Dividing boxes for telecommunication cables; lead sleeves) |
| DIN 47613-2-1959 |
電纜配件.通信電纜用分線套管.鎧裝電纜用保護套管 |
(Cable accessories; branch-off sleeves for telecommunication cables, protected underground couplings for sheathed cables) |
| DIN 47613-3-1959 |
電纜配件.通信電纜用分線套管.木罩 |
(Cable accessories; branch-off sleeves for telecommunication cables, wooden lining) |
| DIN 47613-4-1959 |
電纜配件.通信電纜用分線套管.電纜卡圈 |
(Cable accessories; branch-off sleeves for telecommunication cables, cable clip) |
| DIN 47613-5-1961 |
通信電纜用分線套管.電纜配置原則 |
(Branch-off sleeves for telecommunication cables; regulations for the allocation to the cables) |
| DIN 47614-1975 |
通信設備用接線板 |
(Terminal strips for telecommunication systems) |
| DIN 47615-1999 |
通信設備配電箱.尺寸,類型 |
(Distributionboxes for telecommunication systems - Dimensions, types) |
| DIN 47616-1971 |
通信設備用接線板和端子板.要求.檢驗 |
(Flat connecting blocks and terminal strips for telecommunication systems; requirements, tests) |
| DIN 47617-1975 |
帶金屬護套壓氣監控通信電纜的連接套.內套管 |
(Joint boxes for pressure gas supervised telecommunication cables, metal sheathed; internal joint boxes) |
| DIN 47619-1-1979 |
通信電纜接頭.對稱絞合件電纜 |
(Splicing of telecommunication cables; cable with symmetrical stranding components) |
| DIN 47622-1979 |
通信電纜連接套管用塑料護套管 |
(Plastic sleeves for telecommunication cable-connecting sleeves) |
| DIN 47624-2001 |
金屬導線或光纖通信電纜用塑料夾緊套管.要求和試驗 |
(Clamping closures of plastics for telecommunication cables with metallic conductors and optical fibres - Requirements and tests) |
| DIN 47625-1980 |
通信設備電纜終端配件組.頻率范圍4KHZ以下.要求.檢驗 |
(Cable terminal fitting for telecommunication systems, frequency range up to 4 kHz; requirements, tests) |
| DIN 47626-1990 |
通信電纜外皮接線端子.要求.檢驗 |
(Sheath-clamps for telecommunication cables; requirements, tests) |
| DIN 47627-1986 |
通信電纜套管內的非焊接芯線連接.要求.檢驗 |
(Solderless coreconnections in sleeves for telecommunication cables; requirements, tests) |
| DIN 47628-1-1983 |
通信電纜用熱塑性緊固套.尺寸 |
(Thermoplastic-clamping sleeves for telecommunication cables; dimensions) |
| DIN 47628-2-1983 |
通信電纜用熱塑性緊固套.電纜的配置 |
(Thermoplastic-clamping sleeves for telecommunication cables; allocation to the cables) |
| DIN 47629-1986 |
通訊電纜終端用壓縮空氣密封閉鎖.要求.檢驗 |
(Pressure-tight blockstops for telecommunication cables; requirements, tests) |
| DIN 47630-1-1972 |
１ＫＶ以下金屬鑄造材料制室內連接套管.尺寸 |
(House junction boxes up to 1000 V; dimensions) |
| DIN 47630-10-1972 |
１ＫＶ以下金屬鑄造材料制室內連接套管.用于NYY配電電纜和NYY室內連接電纜的內部結構 |
(House junction boxes up to 1000 V; inner design for distribution cable NYY and house junction cable NYY) |
| DIN 47630-11-1972 |
１ＫＶ以下金屬鑄造材料制室內連接套管.用于NYY配電電纜和NYY室內連接電纜的安裝說明 |
(House junction boxes up to 1000 V; installation instruction for distribution cable NYY and house junction cable NYY) |
| DIN 47630-2-1972 |
１ＫＶ以下金屬鑄造材料制室內連接套管.用于NKBA配電電纜和NKBA室內連接電纜的內部結構 |
(House junction boxes up to 1000 V; inner design for distribution cable NKBA and house junction cable NKBA) |
| DIN 47630-3-1972 |
１ＫＶ以下金屬鑄造材料制室內連接套管.用于NKBA配電電纜和NKBA室內連接電纜的安裝說明 |
(House junction boxes up to 1000 V; installation instructions for distribution cable NKBA and house junction cable NKBA) |
| DIN 47630-4-1972 |
１ＫＶ以下金屬鑄造材料制室內連接套管.用于NKBA配電電纜和NYCY室內連接電纜的內部結構 |
(House junction boxes up to 1000 V; inner design for distribution cable NKBA and house junction cable NYCY) |
| DIN 47630-5-1972 |
１ＫＶ以下金屬鑄造材料制室內連接套管.用于NKBA配電電纜和NYCY室內連接電纜的安裝說明 |
(House junction boxes up to 1000 V; installation instructions for distribution cable NKBA and house junction cable NYCY) |
| DIN 47630-6-1972 |
１ＫＶ以下金屬鑄造材料制室內連接套管.用于NAKLEY配電電纜和NYCY室內連接電纜的內部結構 |
(House junction boxes up to 1000 V; inner design for distribution cable NAKLEY and house junction cable NYCY) |
| DIN 47630-7-1972 |
１ＫＶ以下金屬鑄造材料制室內連接套管.用于NAKLEY配電電纜和NYCY室內連接電纜的安裝說明 |
(House junction boxes, up to 1000 V; installation instructions for distribution cable NAKLEY and house junction cable NYCY) |
| DIN 47630-8-1972 |
１ＫＶ以下金屬鑄造材料制室內連接套管.用于NYCWY配電電纜和NYCY室內連接電纜的內部結構 |
(House junction boxes up to 1000V; inner design for distribution cable NYCWY and house junction cable NYCY) |
| DIN 47630-9-1972 |
１ＫＶ以下金屬鑄造材料制室內連接套管.用于NYCWY配電電纜和NYCY室內連接電纜的安裝說明 |
(House junction boxes up to 1000 V; installation instruction for distribution cable NYCWY and house junction cable NYCY) |
| DIN 47632-1-1978 |
1KV以下的塑料絕緣電力電纜用熱縮塑料軟管的連接套管.保護套管 |
(Joint boxes of heat-shrinking plastic-hose for plastic insulated power cables up to 1000 V; joint protection boxes) |
| DIN 47632-2-1978 |
1KV以下的塑料絕緣電力電纜用熱縮塑料軟管的連接套管.內套管 |
(Joint boxes of heat-shrinking plastic-hose for plastic insulated power cables up to 1000 V; internal joint boxes) |
| DIN 47632-3-1978 |
1KV以下的塑料絕緣電力電纜用熱縮塑料軟管的連接套管.導線截面的配置 |
(Joint boxes of heat-shrinking plastic-hose for plastic insulated power cables up to 1000 V; allocation of conductor cross sections) |
| DIN 47632-4-1978 |
1KV以下的塑料絕緣電力電纜用熱縮塑料軟管的連接套管.內部結構 |
(Joint boxes of heat-shrinking plastic-hose for plastic insulated power cables up to 1000 V; internal construction) |
| DIN 47633-1984 |
通信電纜設備中同軸副連接.要求.檢驗 |
(Coaxial splices in telecommunication cables; requirements, tests) |
| DIN 47634-1984 |
通訊電纜用熱塑塑料套管.要求.檢驗 |
(Plastic heat shrinking sleeves, for telecommunication cables; requirements, tests) |
| DIN 47635-1973 |
金屬鑄件制電纜配件填料槽和凹槽 |
(Gasket grooves and folds for cast-metal cable fittings) |
| DIN 47636-7-1990 |
外錐套形儀器連接件用電力電纜插套組合配件.Um可達36kV.儀器連接件和電纜插接件的安裝尺寸 |
(Bushing for separable accessories for power cable with protruding cone; U up to 36 kV, dimensions of the arrangement for bushings and separable connectors) |
| DIN 4764-1982 |
機械工程和精密制造技術用件的表面.與應力有關的概念 |
(Surfaces of components used in mechanical engineering and light engineering; Terminology according to stress conditions) |
| DIN 47642-1975 |
配件用金屬澆鑄電纜卡圈 |
(Cast-metal cable sheathes for accessories) |
| DIN 47643-1973 |
電纜配件用套管蓋 |
(Boxlid for cable fittings) |
| DIN 47645-1989 |
通信電纜用熱收縮塑料制蓋.要求.檢驗 |
(Plastic heat shrinking caps for telecommunication cables; requirements, tests) |
| DIN 47650-1955 |
電纜附件.截面在400平方毫米以下的銅制或鋁制圓線和扁線用連接焊接套管 |
(Cable accessories - Connecting soldering sleeves for round and sector conductors, of copper or aluminium, up to 400 mm cross section) |
| DIN 47658-1975 |
銅和鋁導線的房屋引入線連接套管的電纜分線端子 |
(Branch terminals in house connections for copper and aluminium conductors) |
| DIN 47659-1975 |
截面為150mm2以下的波紋形同心銅導線接地端子 |
(Earthing connector for corrugated concentric copper-conductor up to 150 mm) |
| DIN 47661-2-1973 |
塑料絕緣通信電纜用絕緣套管.線組環 |
(Insulation bushings, group rings for plastic insulated communication cables) |
| DIN 4769-4-1974 |
粗糙度比較塊.用磨料清潔的金屬表面 |
(Roughness comparisons specimens; metallic surfaces, cleaning with abrasives) |
| DIN 477-4-1982 |
氣瓶閥.輕便儲氣瓶頸的止回閥 |
(Compressed gas cylinder valves; swing check valves for camping-cylinders) |
| DIN 477-5-2002 |
氣瓶閥.第5部分:最大試驗壓力為450巴氣瓶閥.出口接頭 |
(Gas cylinder valves - Part 5: For test pressure up to 450 bar max.; Outlet connections) |
| DIN 47700-1985 |
絕緣電力電線.一覽表.安全技術排線 |
(Cables, wires and flexible cords for power installation - Survey, assignment according to safety requirements) |
| DIN 47703-1989 |
絕緣電力電線.NSGAOeU.NSGAFOeU和NSGAFCMOeV型特種橡皮單芯電線.尺寸.標志.重量和交貨方式 |
(Cables, wires and flexible cords for power installation; Special rubber; Insulated single - Core cable NSGA橴, NSGAF橴 and NSGAFCM橴 - Dimensions, designation, weights and packaging-requirements) |
| DIN 47705-1989 |
絕緣電力電線.NYM型聚氯乙烯護套線.尺寸.標志.重量和交貨方式 |
(Cables, wires and flexible cords for power installation - PVC-sheathed cable NYm - Dimensions designation, weights and packaging, requirements) |
| DIN 47707-1970 |
按VDE0250的絕緣電力電線.NYRUZY型卷邊護套線.用途.尺寸.重量 |
(Thermoplastic covered metal sheathed cables NYRUZY) |
| DIN 47708-1970 |
按VDE0250的絕緣電力電線.NYBUY型鉛護套電線.用途.尺寸.重量 |
(Lead sheathed cables NYBUY) |
| DIN 47715-1970 |
按VDE0250的絕緣電力電線.NYJF.NYJFY型帶形線.用途.尺寸.重量 |
(Thermoplastic insulated and rubber covered flat cables NYJF, NYJFY) |
| DIN 47720-1970 |
按VDE0250的絕緣電力電線.NFYW型耐氣侯性塑料絕緣線.用途.尺寸.重量 |
(Weatherproof thermoplastic insulated cables NFYW) |
| DIN 47721-1970 |
按VDE0250的絕緣電力電線.NSHCOEU型屏蔽重型橡膠套軟線.用途.尺寸.重量 |
(Screened heavy duty, tough-rubber sheathed flexible cables NSHCoeu) |
| DIN 47724-1-1970 |
按VDE0250的絕緣電力電線.NYFAW.NYFAFW型耐高溫塑料燈頭線.用途.尺寸.重量 |
(Thermoplastic insulated heat resisting wires and flexible cords for lighting fittings NYFAw, NYFAFw) |
| DIN 47724-2-1970 |
按VDE0250的絕緣電力電線.NYFAZW.NYFADW型耐高溫塑料燈頭線.用途.尺寸.重量 |
(Thermoplastic insulated heat resisting flexible cords for lighting fittings NYFAZw, NYFADw) |
| DIN 47725-1970 |
按VDE0250的絕緣電力電線.NYPLYW型耐高溫塑料吊燈軟線.用途.尺寸.重量 |
(Thermoplastic insulated and sheathed heat resisting drop cord with reinforcing strand NYPLYw) |
| DIN 47726-1983 |
絕緣電力電線.05V聚氯乙烯單芯線.尺寸.標記.重量和交貨方式 |
(Insulated cables for power installation - PVC-single-core non-sheated cable 05V - Dimensions, designation, weights and packaging-requirement) |
| DIN 47727-1983 |
絕緣電力電線.07V聚氯乙烯芯線.尺寸.標記.重量和交貨方式 |
(Cables and flexible cords for power installation - PVC-single-core non-sheathed cable 07V - Dimensions, designation, weights and packaging-requirement) |
| DIN 47728-1985 |
絕緣電力電線.05RR和05RRT橡膠護套軟線.尺寸.標記.重量和交貨方式 |
(Cables, wires and flexible cords for power installation - Rubber sheathed flexible cable 05RR and 05RRT - Dimensions, designation, weights and packaging-requirement) |
| DIN 47729-1983 |
絕緣電力電線.05RN橡膠護套軟線.尺寸.標記.重量和交貨方式 |
(Cables, wires and flexible cords for power installation - Rubber sheathed flexible cable 05RN - Dimensions, designation, weights and packaging-requirement) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com