標準號 |
中文名稱 |
英文名稱 |
| DIN 28153-2-1994 |
鋼制搪瓷攪拌容器用的閉鎖蓋.公稱寬度100至250 |
(Covers for DN 100 up to DN 250 openings in glass-lined apparatuses) |
| DIN 28154-1983 |
滑動環密封的非合金和不銹鋼攪拌器的軸端.尺寸 |
(Shaft end for carbon and stainless steel agitators, for rotating mechanical seals; dimensions) |
| DIN 28155-1992 |
非合金鋼和不銹鋼制攪拌軸用聯軸節.攪拌容器的聯軸節.尺寸 |
(Flanged couplings for carbon and stainless steel agitator shafts; coupling in the agitator vessel; dimensions) |
| DIN 28156-1981 |
填料箱用非合金鋼和不銹鋼攪拌器的軸頭.尺寸 |
(Shaft end for agitators of carbon and stainless steel, for stuffing boxes; dimensions) |
| DIN 28157-1992 |
鋼制搪瓷葉輪攪拌器.尺寸 |
(One piece glass lined impeller agitator; dimensions) |
| DIN 28158-1984 |
單件搪瓷鋼錨式攪拌器.尺寸 |
(One piece glass lined anchor agitator; dimensions) |
| DIN 28159 Bb.1-1984 |
鋼制搪瓷的單個攪拌器的軸端.有關強度信息 |
(Shaft end for externally coupled glass lined steel agitators; information concerning strength) |
| DIN 28159-1983 |
鋼制搪瓷的單個攪拌器的軸端.尺寸 |
(Shaft end for externally coupled glass lined steel agitators; dimensions) |
| DIN 28160-1983 |
非合金鋼和不銹鋼制攪拌容器用支撐環.縱向位置 |
(Support rings for carbon and stainless steel agitator vessels; position) |
| DIN 28161-1987 |
對攪拌傳動的要求.旋轉速度.旋轉方向.支承.轉動的精確鍍.滑動密封環的折卸空間 |
(Requirements on agitator drives; agitator speed and direction, bearing application running accuracy, dismounting space for shaft seal) |
| DIN 28162-1-1983 |
帶滑動環密封的攪拌器傳動裝置用攪拌傳動托座 |
(Agitator gear stools for agitator drives with a rotating mechanical seal) |
| DIN 28162-2-1983 |
帶填料盒密封的攪拌器傳動裝置用攪拌傳動托座 |
(Agitator gear stools for agitator drives with gland sealing) |
| DIN 28163-1983 |
非合金鋼和不銹鋼制攪拌軸的密封填料盒 |
(Stuffing box for agitator shafts of carbon and stainless steel) |
| DIN 2817-1-1995 |
帶卡緊件的軟管管件.第1部分:要求.概覽.標記和檢驗 |
(Hose fittings with clamp unit - Part 1: Requirements, summary, designations and testing) |
| DIN 2817-2-1995 |
帶卡緊件的軟管管件.第2部分:螺絲和銷釘卡緊件 |
(Hose fittings with clamp unit - Part 2: Clamp units, bolted or pinned) |
| DIN 2817-3-1995 |
帶卡緊件的軟管管件.第3部分:軟管側面支撐件.尺寸和結構 |
(Hose fittings with clamp unit - Part 3: Hose side couplings; dimensions and design) |
| DIN 2817-4-1995 |
帶卡緊件的軟管管件.第4部分:帶外管螺紋的軟管管接頭 |
(Hose fittings with clamp unit - Part 4: Hose couplings with male pipe thread) |
| DIN 2817-5-1995 |
帶卡緊件的軟管管件.第5部分:帶管螺紋鎖緊螺母的軟管支承 |
(Hose fittings with clamp unit - Part 5: Hose couplings with union nut and pipe thread) |
| DIN 2817-6-1995 |
帶卡緊件的軟管管件.第6部分:PN10用連接尺寸,帶法蘭的軟管支撐件 |
(Hose fittings with clamp unit - Part 6: Hose couplings with flanges, fitting dimensions for PN 10) |
| DIN 28179-1989 |
管束式熱交換器用鋼制U型管.交貨技術條件 |
(Steel U-tubes for tubular heat exchangers; technical delivery conditions) |
| DIN 28180-1985 |
管束式熱交換器的無縫鋼管.尺寸.尺寸偏差和材料 |
Seamless steel tubes for tubular heat exchangers; dimensions, dimensional deviations and materials |
| DIN 28181-1985 |
管束式熱交換器的焊接鋼管.尺寸.尺寸偏差和材料 |
(Welded steel tubes for tubular heat exchangers; dimensions, dimensional deviations and materials) |
| DIN 28182-1987 |
管束式熱交換器.管子分布.管底座鉆孔直徑.導向扇形塊和支承板 |
(Tubular heat exchangers; tube pitches, diameter of bores in tube sheets, baffles and support plates) |
| DIN 28183-1988 |
殼管式熱交換器.名稱 |
(Tubular heat exchangers; nomenclature) |
| DIN 28184-1-1988 |
兩端固定的殼管式熱交換器.內管直徑25.三角形管心距32.內管的數目和配置 |
(Fixed head tubular heat exchangers with type 25 tubes and triangular 32 tube pitch; number and pattern of tubes) |
| DIN 28184-2-1988 |
兩端固定的殼管式熱交換器.內管直徑25.方形管心距32.內管的數目和配置 |
(Fixed head heat exchangers with type 25 tubes and square 32 tube pitch; number and pattern of tubes) |
| DIN 28184-4-1988 |
兩端固定的殼管式熱交換器.內管直徑20.三角管心距25.內管的數目和配置 |
(Fixed head heat exchangers with type 20 tubes and triangular 25 tube pitch; number and pattern of tubes) |
| DIN 28185-1988 |
管原式熱交換器.管殼安裝 |
(Tubular heat exchangers; tube bundle components) |
| DIN 28187-1991 |
管束式熱交換器.管與底板緊固連接 |
(Tubular heat exchangers; connections tube to tube sheet) |
| DIN 28190-1981 |
帶焊接的浮動頭的管束式熱交換器.程數2.內管25.方形管心距32.內管.支桿和滑軌的數目和配置 |
(Floating head heat exchanger with welded floating head; number of passes: 2, tubes 25, square tube pitch 32; number and pattern of tubes, tie rods and slide rails) |
| DIN 28191-1981 |
帶裝上法蘭盤浮動頭的管束式熱交換器.程數2.4和8.內管25.方形管心距32.內管.支桿和滑軌的數目和配置 |
(Floating head heat exchanger with flanged floating head; number of passes: 2,4 and 8, tubes 25, square tube pitch 32; number and pattern of tubes, tie rods and slide rails) |
| DIN 28192-1994 |
管束用橡膠隔板密封.熱交換器 |
(Elastic pass partition gaskets for tubular heat exchangers) |
| DIN 2825-1 Bb.1-1994 |
蒸汽和熱水用橡膠軟管.安裝說明 |
(Hoses assemblies made of elastomers for steam and hot water; hints for assembly) |
| DIN 2825-1-1994 |
蒸汽和熱水用橡膠軟管.一般要求 |
(Hose assemblies made of elastomers for steam and hot water; general requiements) |
| DIN 2825-2-1994 |
蒸汽和熱水用橡膠軟管.檢驗 |
(Hose assemblies made of elastomers for steam and hot water; tests) |
| DIN 2826-1994 |
蒸汽和熱水用帶卡夾的軟管管件.DN15至DN50.18巴以下 |
(Hose fittings with clamp unit for steam and hot water, DN 15 up to DN 50, up to 18 bar) |
| DIN 2827-1994 |
化學材料用不銹鋼軟管 |
(Hose assemblies of stainless steel for chemical products) |
| DIN 2828-1994 |
軟管用鎖定離合裝置.公稱壓力 |
(Cam locking couplings for hose assemblies; nominal pressure 10) |
| DIN 28400 Bb.1-1982 |
真空技術.名稱和定義.字順?biāo)饕?/td>
| (Vacuum technology, terms and definitions; alphabetical index) |
| DIN 28400-1-1990 |
真空技術.名稱和定義.普用名稱 |
(Vacuum technology; terms and definitions; general terms) |
| DIN 28400-2-1980 |
真空技術.名稱和定義.真空泵 |
(Vacuum technology; terms and definitions, vacuum pumps) |
| DIN 28400-3-1992 |
真空技術.名稱和定義.真空測量儀表 |
(Vacuum technology; terms and definitions; vacuum gauges) |
| DIN 28400-4-1976 |
真空技術.名稱和定義.真空涂層技術 |
(Vacuum technology - Terms and definitions, vacuum coating) |
| DIN 28400-5-1981 |
真空技術.名稱和定義.真空干燥和升華干燥 |
(Vacuum technology; terms and definitions; vacuum drying and lyophilisation) |
| DIN 28400-6-1980 |
真空技術.名稱和定義.表層分析技術 |
(Vacuum technology; terms and definitions, surface analysis techniques) |
| DIN 28400-7-1978 |
真空技術.名稱及定義.真空冶金學 |
(Vakuum technology; terms and definitions, vacuum metallurgie) |
| DIN 28400-8-1997 |
真空技術.名稱和定義.第8部分:真空系統.部件和附件 |
(Vacuum technology - Terms and definitions - Part 8: Vacuum systems, components and accessories) |
| DIN 28401-1976 |
真空技術.圖形符號.概覽 |
(Vacuum technology; graphical symbols, summary) |
| DIN 28402-1976 |
真空技術.尺寸.公式符號.單位.概覽 |
(Vacuum technology; quantities, symbols, units, summary) |
| DIN 28403-1986 |
真空技術.快速連接.小法蘭連接 |
(Vacuum technology; quick release couplings; clamped type couplings) |
| DIN 28404-1986 |
真空技術.法蘭.尺寸 |
(Vacuum technology; flanges; dimensions) |
| DIN 28410-1968 |
真空技術.質譜測定的分壓力測量儀.概念.參數.工作條件 |
(Vacuum Technology; Mass Spectrometer Partial Pressure Gauges; Definitions, Characteristics, Operating Conditions) |
| DIN 28411-1976 |
真空技術.質譜儀檢漏器的驗收規則.概念 |
(Vacuum technology; acceptance specifications for mass spectrometer-type leak-detector, terms) |
| DIN 28416-1976 |
真空技術.10(-3)至10(-7)mbar范圍真空計的校準.一般方法:通過連續不斷的流動降低壓力 |
(Vaccum technology; calibration of vacuum gauges within the range of 10 to 10 mbar, general method: pressure reduction by continuous flow) |
| DIN 28417-1976 |
真空技術.按容積法在互壓時測量PV流量 |
(Vacuum technology; measurement of throughput by the volumetric method at constant pressure) |
| DIN 28418-1-1976 |
真空技術.用參比測量儀直接比較校準真空計的標準方法.一般原理 |
(Vacuum technology; standard method for vacuum gauge calibration by direct comparison with a reference vacuum gauge) |
| DIN 28418-2-1978 |
真空技術.用參比測量儀直接比較校準真空計的標準方法.電離真空計 |
(Vakuum technology; standard method for vacuum gauge calibration by direct comparison with a reference vaccum gauge, ionization vacuum gauge) |
| DIN 28418-3-1980 |
真空技術.用參比測量儀直接比較校準真空計的標準方法.熱導真空計 |
(Vacuum technology; standard method for vacuum gauge calibration by direct comparison with a reference vacuum gauge, thermal conductivity gauges) |
| DIN 28426-1-1983 |
真空技術.旋轉真空泵.在近似真空和高真空范圍內的閉塞閥真空泵和旋轉閥真空泵的驗收規則 |
(Vacuum technology; acceptance specifications for rotary plunger vacuum pumps, sliding vane rotary vacuum pumps and rotary piston vacuum pumps for the ranges of rough and medium vacuum) |
| DIN 28426-2-1976 |
真空技術.旋轉活塞真空泵的驗收規則.高真空范圍內的搖桿式活塞真空泵 |
(Vacuum technology; acceptance specifications for roots vacuum pumps for the range of medium vacuum) |
| DIN 28427-1983 |
真空技術.蒸氣壓低于1mbar的擴散泵和蒸氣噴射真空泵的驗收規則 |
(Vacuum technology; acceptance specifications for diffusions pumps and vapour jet vacuum pumps for vapour pressures of the pump fluid 1 mbar) |
| DIN 28428-1978 |
真空技術.渦輪分子泵的驗收規則 |
(Vacuum technology; acceptance specifications for turbomolecular pumps) |
| DIN 28429-2003 |
真空技術.濺射離子泵的驗收規范 |
(Vacuum technology - Acceptance specifications for getter ion pumps) |
| DIN 28430 Berichtigung 1-2002 |
DIN28430:1984-11的勘誤 |
(Corrigenda to DIN 28430:1984-11) |
| DIN 28430-1984 |
真空技術.以蒸汽作為驅動介質的蒸汽噴射真空泵和蒸汽噴射壓縮機用測量規則 |
(Vacuum technology; rules for the measurement of steam jet vacuum pumps and steam jet compressors using steam as the working fluid) |
| DIN 28431-1987 |
真空技術.液體環式真空泵的驗收規程 |
(Vacuum technology; acceptance specifications for liquid ring vacuum pumps) |
| DIN 28432-1996 |
真空技術.膜片真空泵的驗收規則 |
(Vacuum technology - Acceptance specifications for diaphragm vacuum pumps) |
| DIN 28450-1-1996 |
罐車聯管節.額定壓力10.額定寬度50.80和100.第1部分:一覽表.結構原理.檢驗.符號 |
(Couplings for tank trucks, nominal pressure 10, nominal size 50, 80 and 100 - Part 1: Survey, design, testing, marking) |
| DIN 28450-2-1996 |
罐車聯管節.額定壓力10.額定寬度50.80和100.第2部分:實心聯管節 |
(Couplings for tank trucks, nominal pressure 10, nominal size 50, 80 and 100 - Part 2: Male coupling) |
| DIN 28450-3-1996 |
罐車聯管節.額定壓力10.額定寬度50.80和100.第3部分:電磁聯接管節 |
(Couplings for tank trucks, nominal pressure 10, nominal size 50, 80 and 100 - Part 3: Female coupling) |
| DIN 28450-4-1996 |
罐車聯管節.額定壓力10.額定寬度50.80和100.第4部分:磁感聯管節 |
(Couplings for tank trucks, nominal pressure 10, nominal size 50, 80 and 100 - Part 4: Female dust coupling) |
| DIN 28450-5-1996 |
罐車聯管節.額定壓力10.額定寬度50.80和100.第5部分:VB型聯軸節 |
(Couplings for tank trucks, nominal pressure 10, nominal size 50, 80 and 100 - Part 4: Male dust coupling) |
| DIN 28450-6-1996 |
罐車聯管節.額定壓力10.額定寬度50.80和100.第6部分:單節軟管接頭 |
(Couplings for tank trucks, nominal pressure 10, nominal size 50, 80 and 100 - Part 6: One-piece hose coupling) |
| DIN 28453-1-1987 |
油罐車聯軸節用的量規.公稱直徑50.80和100的量規用于弧形聯接件和栓塞.A1型量規 |
(Calibers for couplings for tank trucks, DN 50, DN 80 and DN 100 for curved piece and stopper; caliber A 1) |
| DIN 28453-2-1987 |
油罐車聯軸節用的量規.公稱直徑為50.80和100的量軌用于弧形聯接件和栓塞.B1型量規 |
(Calibers for couplings for tank trucks, DN 50, DN 80 and DN 100 for curved piece and stopper; caliber B 1) |
| DIN 28454-1-1987 |
油罐車聯軸節用的量規.公稱直徑為50.80和100的量規用于密封環.A1型量軌 |
(Calibers for couplings for tank trucks, DN 50, DN 80 and DN 100 for sealing ring; caliber A 1) |
| DIN 28454-2-1987 |
油罐車聯軸節用的量規.公稱直徑為50.80和100的量規用于密封環.公稱直徑50和80的B1量規 |
(Calibers for couplings for tank trucks, DN 50, DN 80 and DN 100 for sealing ring; caliber B 1 for DN 50 and DN 80) |
| DIN 28455-1987 |
油罐車聯軸節用的量規.公稱直徑為50.80和100的張力環用的量規 |
(Calibers for couplings for tank trucks, DN 50, DN 80 and DN 100; caliber for former) |
| DIN 28456-1987 |
油罐車聯軸節用的量規.公稱直徑為50.80和100的罩用量規 |
(Calibers for couplings for tank trucks, DN 50, DN 80 and DN 100; caliber for bonnet) |
| DIN 28459-1987 |
罐車用法蘭.連接尺寸 |
(Flanges for tank trucks; mounting dimensions) |
| DIN 28460-1987 |
罐車用法蘭.鋁管的焊接法蘭 |
(Flanges for tank trucks; welding flanges for aluminium tubes) |
| DIN 28461-1987 |
罐車用法蘭.鋼管的焊接平法蘭 |
(Flanges for tank trucks; plain welding flanges for steel tubes) |
| DIN 28462-1987 |
罐車用法蘭.罐車接頭用的螺紋法蘭 |
(Flanges for tank trucks; threaded flanges for couplings for tank trucks) |
| DIN 28463-1987 |
罐車附件的法蘭.平密封墊 |
(Flanges for tank trucks; gaskets) |
| DIN 2848-2002 |
鋼制法蘭管和有襯里的鋼制及鑄鐵制法蘭管件.PN10、PN25和PN40 |
(Flanged steel pipes and flanged steel or cast iron fittings with lining - PN 10, PN 25 and PN 40) |
| DIN 28601-2000 |
韌性鑄鐵管道和配件.螺紋套管接頭.組件,套管,螺絲環,密封環和滑動環 |
(Ductile iron pipes and fittings - Screwed socket joints - Assembly, sockets, screw rings, sealing rings and slip rings) |
| DIN 28602-2000 |
球墨鑄鐵管及配件.螺栓壓緊密封接頭.組件、套管、計數器環、螺栓和螺母 |
(Ductile iron pipes and fittings - Bolted gland joints - Assembly, sockets, counter ring, sealing ring, bolts and nuts) |
| DIN 28603-2002 |
可鍛鑄鐵管和配件.插塞套管連接件.組裝、插入和密封 |
Ductile iron pipes and fittings - Push-in joints - Survey, sockets and gaskets |
| DIN 28650-1999 |
可鍛鑄鐵異型件.彎頭30°EN件,MI件和IT件.使用,尺寸 |
Ductile iron fittings - Double socket 30?bends, EN-fittings, MI-fittings, IT-fittings - Application, dimensions |
| DIN 2873-2002 |
法蘭配件管和搪瓷凸緣鋼.PN 10和PN 25 |
Flanged fitting pipes and flanged steel glass lined - PN 10 and PN 25 |
| DIN 2874-2002 |
鋼制法蘭管和帶PTFE或PFA襯里的鋼制和鑄鐵法蘭管件.技術規范 |
Steel flanged pipes and steel and cast iron flanged fittings lined with PTFE or PFA - Technical specifications |
| DIN 2875-2002 |
帶硬質或軟質橡膠襯里的法蘭鋼管和法蘭鋼管件.技術規范 |
Flanged steel pipes and flanged steel fittings with hard or soft rubber lining - Technical specifications |
| DIN 2876-2002 |
鋼制法蘭管和搪瓷鋼制法蘭管件.技術規范 |
Flanged steel pipes and flanged steel fittings glass lined - Technical specifications |
| DIN 2880-1999 |
鑄鐵管,鋼管和管件用水泥砂漿管線襯的應用 |
Application of cement mortar lining for cast iron pipes, steel pipes and fittings |
| DIN 2908-1-1979 |
橢圓形塞.組裝 |
Oval blank plugs; assembly |
| DIN 2908-2-1979 |
橢圓形塞.零件 |
(Oval blank plugs; parts) |
| DIN 2909-1-1979 |
圓形塞.組裝 |
Round blank plugs; assembly |
| DIN 2909-2-1979 |
圓形塞.零件 |
Round blank plugs; parts |
| DIN 2914-1987 |
蒸汽鍋爐耐壓外殼的檢查孔密封.設計.交貨條件 |
Manhole blanking devices for pressure containing steam generator parts; design, conditions of delivery |
| DIN 2916-1975 |
無縫和焊接鋼管的彎曲半徑.設計圖紙 |
Bending Radii for Seamless and Welded Steel Tubes; Design Sheet |
| DIN 2917-1982 |
熱蒸汽管道和貯存器用無縫鋼管 |
Seamless steel tubes for superheated steam pipelines and headers |
| DIN 2921-1968 |
檢查門450×450 |
Access openings 450 450 |
| DIN 2922-1968 |
防爆門450×450 |
Explosion openings 450 450 |
| DIN 2924-1972 |
蒸汽鍋爐檢查門500 |
(Access openings 500 for boilers) |
| DIN 29502-1-1986 |
航空和航天.用織物強化的丙烯酸樹脂有機玻璃制作的飛機窗玻璃的鑲邊.設計和加工準則 |
Aerospace; edge reinforcements for aircraft glazings of fabric reinforced acrylic resins; directives for design |
| DIN 29505-1987 |
航空和航天.纖維增強塑料構件.圖紙和構件表的說明 |
Aerospace; components of fibre reinforced plastics; indications in drawings and parts lists |
| DIN 29531-1990 |
航空和航天.鋁合金和鎂合金鑄件.交貨的技術條件.不適于新結構 |
(Aerospace; castings of aluminium and magnesium alloys; technical specification) |
| DIN 29543-1990 |
航空和航天.鍛鋁合金無縫承壓管.交貨技術條件.不適于新結構 |
(Aerospace; seamless internal pressure tubes in wrought aluminium alloys; technical specification; inactive for new design) |
| DIN 29544-1990 |
航空和航天.無縫的鋁管和精煉鋁合金管.交貨技術條件.不適于新結構 |
(Aerospace; seamless duct tubing of aluminium and wrought aluminium alloys; technical specification; inactive for new design) |
| DIN 29546-1990 |
航空和航天.鋁塑性合金薄片.板材和帶材；交貨的技術條件.不適于新結構 |
(Aerospace; wrought aluminium alloys sheet, plate and strip; technical specification; inactive for new design) |
| DIN 29547-1990 |
航空和航天.鍛鋁合金制無縫管.交貨技術條件.不適用于新結構 |
(Aerospace; seamless structural tubes in wrought aluminium alloys; technical specification; inactive for new design) |
| DIN 29548-1-1993 |
航空和航天.楔型插件 |
(Aerospace; offsettings with wedge) |
| DIN 29548-2-1993 |
航空和航天.無楔型插件 |
(Aerospace; offsettings without wedge) |
| DIN 29548-3-1993 |
航空和航天.插件.結構說明和實例 |
(Aerospace; offsettings; directions for design and examples) |
| DIN 29571-2-1992 |
航空和航天.電器設備.設備、儀器和導線識別標志 |
(Aerospace; electrical subsystems; identification of circuits, equipments and cables) |
| DIN 29571-3-1990 |
航空和航天.電氣設備.電能平衡 |
(Aerospace; electrical equipment; analysis of load and power source capacity) |
| DIN 29576-1-1992 |
航空和航天.飛機上用電氣系統.性能不適于新結構 |
(Aerospace; aircraft electrical systems; characteristics; inactive for new design) |
| DIN 29576-2-1987 |
航空和航天.飛機上用電氣系統.對飛機里敷設的電纜的檢驗 |
(Aerospace; aircraft electrical systems; testing of electrical cables installed in aircraft) |
| DIN 29576-3-1991 |
航空和航天.飛機上電氣系統.接外殼 |
(Aerospace, aircaft electrical systems; bonding) |
| DIN 29576-4-1993 |
航空和航天.飛機上用電器系統.短路特性檢驗 |
(Aerospace, aircraft electrical systems; testing of short-circuit behaviour) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com